Skip to contentSkip to conversation

arm64: tegra: Disable XUSB support on Jetson TX2

PATCH In review Thierry Reding 3 participants 3 messages May 6, 2019 – May 8, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: tegra: Disable XUSB support on Jetson TX2

From: Thierry Reding <[email protected]>

The recently introduced XUSB support for Jetson TX2 is causing boot, CPU hotplug and suspend/resume failures according to several reports.

Temporarily work around this by disabling the XUSB controller and XUSB pad controller nodes in device tree, while we figure out what's causing this.

---
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +2 -2
index 75ee6cf1e1b4..14d7fea82daf 100644
@@ -59,7 +59,7 @@
 	};
 
 	padctl@3520000 {
-		status = "okay";
+		status = "disabled";
 
 		avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
 		avdd-usb-supply = <&vdd_3v3_sys>;
@@ -137,7 +137,7 @@
 	};
 
 	usb@3530000 {
-		status = "okay";
+		status = "disabled";
 
 		phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>,
 		       <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>,
Signature · 1 line
2.21.0
#1 lore raw
Quoted 31 lines · Thierry Reding

From: Thierry Reding <[email protected]>

The recently introduced XUSB support for Jetson TX2 is causing boot, CPU hotplug and suspend/resume failures according to several reports.

Temporarily work around this by disabling the XUSB controller and XUSB pad controller nodes in device tree, while we figure out what's causing this.

---
  arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +1 -1
index 75ee6cf1e1b4..14d7fea82daf 100644
@@ -59,7 +59,7 @@
  	};
 
  	padctl@3520000 {
-		status = "okay";
+		status = "disabled";
 
  		avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
  		avdd-usb-supply = <&vdd_3v3_sys>;

arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts line 143

Quoted 8 lines
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +1 -1
@@ -137,7 +137,7 @@
  	};
 
  	usb@3530000 {
-		status = "okay";
+		status = "disabled";
 
  		phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>,
  		       <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>,

Verified with this patch that Jetson TX2 core power is again turning off and suspend mode is entered with additional Tegra186 suspend patches from below patch list under review :
http://patchwork.ozlabs.org/project/linux-tegra/list/?series=78866

maintainer Tested-by Acked-by on v1 1/1
#2 lore raw
In reply to Thierry Reding
Quoted 31 lines · Thierry Reding

From: Thierry Reding <[email protected]>

The recently introduced XUSB support for Jetson TX2 is causing boot, CPU hotplug and suspend/resume failures according to several reports.

Temporarily work around this by disabling the XUSB controller and XUSB pad controller nodes in device tree, while we figure out what's causing this.

---
 arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +1 -1
index 75ee6cf1e1b4..14d7fea82daf 100644
@@ -59,7 +59,7 @@
 	};
 
 	padctl@3520000 {
-		status = "okay";
+		status = "disabled";
 
 		avdd-pll-erefeut-supply = <&vdd_1v8_pll>;
 		avdd-usb-supply = <&vdd_3v3_sys>;

arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts line 143

Quoted 8 lines
arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +1 -1
@@ -137,7 +137,7 @@
 	};
 
 	usb@3530000 {
-		status = "okay";
+		status = "disabled";
 
 		phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>,
 		       <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>,

Thanks.

Cheers
Jon

Signature · 1 line
nvpublic