define convenient securebits masks for prctl users
PATCH v2 1/1 define convenient securebits masks for prctl users
The securebits are used by passing them to prctl with the PR_{S,G}ET_SECUREBITS commands. But the defines must be shifted to be used in prctl, which begs to be confused and misused by userspace. So define some more convenient values for userspace to specify. This way userspace does
prctl(PR_SET_SECUREBITS, SECBIT_NOROOT);
instead of
prctl(PR_SET_SECUREBITS, 1 << SECURE_NOROOT);
Thanks to Michael for the idea.
This patch also adds include/linux/securebits to the installed headers. Then perhaps it can be included by glibc's sys/prctl.h.
Changelog:
Oct 14: (Suggestions by Michael Kerrisk):
1. spell out SETUID in SECBIT_NO_SETUID*
2. SECBIT_X_LOCKED does not imply SECBIT_X
3. add definitions for keepcaps
Oct 14: As suggested by Michael Kerrisk, don't
use SB_* as that convention is already in use. Use SECBIT_ prefix instead.
--- include/linux/Kbuild | 1 + include/linux/securebits.h | 22 ++++++++++++++++------ 2 files changed, 17 insertions(+), 6 deletions(-)
include/linux/Kbuild +1 -0
@@ -328,6 +328,7 @@ unifdef-y += scc.h unifdef-y += sched.h unifdef-y += screen_info.h unifdef-y += sdla.h +unifdef-y += securebits.h unifdef-y += selinux_netlink.h unifdef-y += sem.h unifdef-y += serial_core.h
include/linux/securebits.h +16 -6
@@ -1,6 +1,13 @@#ifndef _LINUX_SECUREBITS_H#define _LINUX_SECUREBITS_H 1 +/* Each securesetting is implemented using two bits. One bit specifies +whether the setting is on or off. The other bit specify whether the +setting is locked or not. A setting which is locked cannot be +changed from user-level. */ +#define issecure_mask (X ) (1 << (X)) +#define issecure (X ) (issecure_mask(X) & current_cred_xxx(securebits)) +#define SECUREBITS_DEFAULT 0x00000000/* When set UID 0 has no special privileges. When unset, we support
@@ -12,6 +19,9 @@#define SECURE_NOROOT 0#define SECURE_NOROOT_LOCKED 1/* make bit-0 immutable */ +#define SECBIT_NOROOT (issecure_mask(SECURE_NOROOT)) +#define SECBIT_NOROOT_LOCKED (issecure_mask(SECURE_NOROOT_LOCKED)) +/* When set, setuid to/from uid 0 does not trigger capability-"fixup". When unset, to provide compatiblility with old programs relying on set*uid to gain/lose privilege, transitions to/from uid 0 cause
@@ -19,6 +29,10 @@#define SECURE_NO_SETUID_FIXUP 2#define SECURE_NO_SETUID_FIXUP_LOCKED 3/* make bit-2 immutable */ +#define SECBIT_NO_SETUID_FIXUP (issecure_mask(SECURE_NO_SETUID_FIXUP)) +#define SECBIT_NO_SETUID_FIXUP_LOCKED \ + (issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED)) +/* When set, a process can retain its capabilities even after transitioning to a non-root user (the set-uid fixup suppressed by bit 2). Bit-4 is cleared when a process calls exec(); setting both
@@ -27,12 +41,8 @@#define SECURE_KEEP_CAPS 4#define SECURE_KEEP_CAPS_LOCKED 5/* make bit-4 immutable */ -/* Each securesetting is implemented using two bits. One bit specifies -whether the setting is on or off. The other bit specify whether the -setting is locked or not. A setting which is locked cannot be -changed from user-level. */ -#define issecure_mask (X ) (1 << (X)) -#define issecure (X ) (issecure_mask(X) & current_cred_xxx(securebits)) +#define SECBIT_KEEP_CAPS (issecure_mask(SECURE_KEEP_CAPS)) +#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED))#define SECURE_ALL_BITS (issecure_mask(SECURE_NOROOT) | \ issecure_mask(SECURE_NO_SETUID_FIXUP) | \
Signature · 1 line
1.6.1
Hi Serge,
Quoted 14 lines · Serge E. Hallyn
The securebits are used by passing them to prctl with the PR_{S,G}ET_SECUREBITS commands. But the defines must be shifted to be used in prctl, which begs to be confused and misused by userspace. So define some more convenient values for userspace to specify. This way userspace does
prctl(PR_SET_SECUREBITS,
SECBIT_NOROOT);instead of
prctl(PR_SET_SECUREBITS, 1 <<
SECURE_NOROOT);Thanks to Michael for the idea.
Quoted 8 lines
This patch also adds
include/linux/securebitsto the installed headers. Then perhaps it can be included by glibc'ssys/prctl.h.Changelog:
Oct 14: (Suggestions by Michael Kerrisk):
1. spell out SETUID in SECBIT_NO_SETUID*
2.SECBIT_X_LOCKEDdoes not implySECBIT_X
3. add definitions for keepcaps
Thanks for these changes.
Quoted 6 lines
Oct 14: As suggested by Michael Kerrisk, don't use SB_* as that convention is already in use. Use
SECBIT_prefix instead.Signed-off-by Serge E. Hallyn <[email protected]>Acked-by Andrew G. Morgan <[email protected]>
Cheers,
Michael
Quoted 77 lines
Cc Michael Kerrisk <[email protected]>Cc Ulrich Drepper <[email protected]>---
include/linux/Kbuild | 1 +include/linux/securebits.h| 22 ++++++++++++++++------2 files changed, 17 insertions(+), 6 deletions(-)include/linux/Kbuild +0
-0@@ -328,6 +328,7 @@ unifdef-y += scc.hunifdef-y +=
sched.h
unifdef-y +=screen_info.h
unifdef-y +=sdla.h
+unifdef-y +=securebits.h
unifdef-y +=selinux_netlink.h
unifdef-y +=sem.h
unifdef-y +=serial_core.hinclude/linux/securebits.h +10
-0@@ -1,6 +1,13 @@ #ifndef _LINUX_SECUREBITS_H #define _LINUX_SECUREBITS_H 1 +/* Each securesetting is implemented using two bits. One bit specifies +whether the setting is on or off. The other bit specify whether the +setting is locked or not. A setting which is locked cannot be +changed from user-level. */ +#define issecure_mask (X ) (1 << (X)) +#define issecure (X ) (issecure_mask(X) & current_cred_xxx(securebits)) + #define SECUREBITS_DEFAULT 0x00000000 /* When set UID 0 has no special privileges. When unset, we support@@ -12,6 +19,9 @@ #define SECURE_NOROOT 0 #define SECURE_NOROOT_LOCKED 1 /* make bit-0 immutable */ +#define SECBIT_NOROOT (issecure_mask(SECURE_NOROOT)) +#define SECBIT_NOROOT_LOCKED (issecure_mask(SECURE_NOROOT_LOCKED)) + /* When set, setuid to/from uid 0 does not trigger capability-"fixup".When unset, to provide compatiblility with old programs relying on set*uid to gain/lose privilege, transitions to/from uid 0 cause
include/linux/securebits.h +4
-0@@ -19,6 +29,10 @@ #define SECURE_NO_SETUID_FIXUP 2 #define SECURE_NO_SETUID_FIXUP_LOCKED 3 /* make bit-2 immutable */ +#define SECBIT_NO_SETUID_FIXUP (issecure_mask(SECURE_NO_SETUID_FIXUP)) +#define SECBIT_NO_SETUID_FIXUP_LOCKED \ + (issecure_mask(SECURE_NO_SETUID_FIXUP_LOCKED)) + /* When set, a process can retain its capabilities even aftertransitioning to a non-root user (the set-uid fixup suppressed by bit 2). Bit-4 is cleared when a process calls
exec(); setting bothinclude/linux/securebits.h +2
-7@@ -27,12 +41,8 @@ #define SECURE_KEEP_CAPS 4 #define SECURE_KEEP_CAPS_LOCKED 5 /* make bit-4 immutable */ -/* Each securesetting is implemented using two bits. One bit specifies -whether the setting is on or off. The other bit specify whether the -setting is locked or not. A setting which is locked cannot be -changed from user-level. */ -#define issecure_mask (X ) (1 << (X)) -#define issecure (X ) (issecure_mask(X) & current_cred_xxx(securebits)) +#define SECBIT_KEEP_CAPS (issecure_mask(SECURE_KEEP_CAPS)) +#define SECBIT_KEEP_CAPS_LOCKED (issecure_mask(SECURE_KEEP_CAPS_LOCKED)) #define SECURE_ALL_BITS (issecure_mask(SECURE_NOROOT) | \ issecure_mask(SECURE_NO_SETUID_FIXUP) | \ --1.6.1
Signature · 3 lines
Michael Kerrisk Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/ Author of "The Linux Programming Interface" http://blog.man7.org/
Quoted 20 lines · Michael Kerrisk
Hi Serge,
Quoted 17 lines · Serge E. Hallyn
The securebits are used by passing them to prctl with the PR_{S,G}ET_SECUREBITS commands. But the defines must be shifted to be used in prctl, which begs to be confused and misused by userspace. So define some more convenient values for userspace to specify. This way userspace does
prctl(PR_SET_SECUREBITS,
SECBIT_NOROOT);instead of
prctl(PR_SET_SECUREBITS, 1 <<
SECURE_NOROOT);Thanks to Michael for the idea.
This patch also adds
include/linux/securebitsto the installed headers. Then perhaps it can be included by glibc'ssys/prctl.h.
Quoted 7 lines
Quoted 5 lines
Changelog:
Oct 14: (Suggestions by Michael Kerrisk):
1. spell out SETUID in SECBIT_NO_SETUID*
2.SECBIT_X_LOCKEDdoes not implySECBIT_X
3. add definitions for keepcapsThanks for these changes.
Thanks for taking a look and commenting!
Quoted 8 lines
Quoted 6 lines
Oct 14: As suggested by Michael Kerrisk, don't use SB_* as that convention is already in use. Use
SECBIT_prefix instead.Signed-off-by Serge E. Hallyn <[email protected]>Acked-by Andrew G. Morgan <[email protected]>Acked-by Michael Kerrisk <[email protected]>
thanks,
-serge