Small fixex for xserver-nodm-init-systemd
cover Small fixex for xserver-nodm-init-systemd
The following changes since commit 9fb576a0d53d4bd511eee64f44d4ed187acdd83c:
gcc-4.6: Update to 2012.03 linaro release (2012-04-08 07:48:16 +0200)
are available in the git repository at:
git://git.openembedded.org/meta-openembedded-contrib jansa/xorg
http://cgit.openembedded.org/cgit.cgi/meta-openembedded-contrib/log/?h=jansa/xorg
Denis 'GNUtoo' Carikli (1):
xserver-nodm-init: use /etc/X11/Xserver from service file instead of
Xorg directly
Martin Jansa (1):
xserver-nodm-init: add EnvironmentFile
.../xserver-nodm-init-2.0/xserver-nodm.conf | 1 + .../xserver-nodm-init-2.0/xserver-nodm.service | 3 ++- .../xserver-nodm-init/xserver-nodm-init_2.0.bb | 7 ++++++- 3 files changed, 9 insertions(+), 2 deletions(-) create mode 100644 meta-oe/recipes-graphics/xserver-nodm-init/xserver-nodm-init-2.0/xserver-nodm.conf
Signature · 1 line
1.7.8.5
PATCH 1/2 xserver-nodm-init: use /etc/X11/Xserver from service file instead of Xorg directly
From: Denis 'GNUtoo' Carikli <[email protected]>
* /etc/X11/Xserver is provided by xserver-common and sets correct DPI before starting Xorg (or other xserver)
--- .../xserver-nodm-init-2.0/xserver-nodm.service | 2 +- .../xserver-nodm-init/xserver-nodm-init_2.0.bb | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
meta-oe/recipes-graphics/xserver-nodm-init/xserver-nodm-init-2.0/xserver-nodm.service +1 -1
@@ -2,7 +2,7 @@ Description=Xserver startup with a display manager [Service] -ExecStart=/usr/bin/xinit /etc/X11/Xsession -- /usr/bin/Xorg +ExecStart=/usr/bin/xinit /etc/X11/Xsession -- /etc/X11/Xserver [Install] WantedBy=multi-user.target
meta-oe/recipes-graphics/xserver-nodm-init/xserver-nodm-init_2.0.bb +1 -1
@@ -3,7 +3,7 @@ LICENSE = "GPLv2" LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe" SECTION = "x11" -PR = "r13" +PR = "r14" SRC_URI = "file://xserver-nodm \ file://xserver-nodm.service \
Signature · 1 line
1.7.8.5
PATCH 2/2 xserver-nodm-init: add EnvironmentFile
* used to set HOME variable before /etc/X11/Xsession is started
* e.g. enlightenment is creating ${HOME}/.e and without this it ends in /tmp/.e and during startup HOME gets defined and switched to /home/root/.e
--- .../xserver-nodm-init-2.0/xserver-nodm.conf | 1 + .../xserver-nodm-init-2.0/xserver-nodm.service | 1 + .../xserver-nodm-init/xserver-nodm-init_2.0.bb | 7 ++++++- 3 files changed, 8 insertions(+), 1 deletions(-) create mode 100644 meta-oe/recipes-graphics/xserver-nodm-init/xserver-nodm-init-2.0/xserver-nodm.conf
meta-oe/recipes-graphics/xserver-nodm-init/xserver-nodm-init-2.0/xserver-nodm.conf new file +1 -0
@@ -0,0 +1 @@ +HOME=/home/root
meta-oe/recipes-graphics/xserver-nodm-init/xserver-nodm-init-2.0/xserver-nodm.service +1 -0
@@ -2,6 +2,7 @@ Description=Xserver startup with a display manager [Service] +EnvironmentFile=/etc/default/xserver-nodm ExecStart=/usr/bin/xinit /etc/X11/Xsession -- /etc/X11/Xserver [Install]
meta-oe/recipes-graphics/xserver-nodm-init/xserver-nodm-init_2.0.bb +6 -1
@@ -3,10 +3,11 @@ LICENSE = "GPLv2" LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe" SECTION = "x11" -PR = "r14" +PR = "r16" SRC_URI = "file://xserver-nodm \ file://xserver-nodm.service \ + file://xserver-nodm.conf \ file://gplv2-license.patch \ " S = "${WORKDIR}"
@@ -25,7 +26,11 @@ SYSTEMD_SERVICE_${PN}-systemd = "xserver-nodm.service" do_install() { install -d ${D}${sysconfdir}/init.d install xserver-nodm ${D}${sysconfdir}/init.d + install -d ${D}${sysconfdir}/default + install xserver-nodm.conf ${D}${sysconfdir}/default/xserver-nodm } +FILES_${PN}-systemd += "${sysconfdir}/default/xserver-nodm" + RDEPENDS_${PN} = "xserver-common (>= 1.30) xinit" RDEPENDS_${PN}-systemd += "xserver-common (>= 1.30) xinit"
Signature · 1 line
1.7.8.5
Re: [meta-oe][PATCH 2/2] xserver-nodm-init: add EnvironmentFile
Quoted 6 lines · Martin Jansa
* used to set HOME variable before
/etc/X11/Xsessionis started
* e.g. enlightenment is creating ${HOME}/.e and without this it ends in/tmp/.eand during startup HOME gets defined and switched to/home/root/.eSigned-off-by Martin Jansa <[email protected]>
Agreed :-)
Signature · 3 lines
Otavio Salvador O.S. Systems E-mail: [email protected] http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br
Re: [meta-oe][PATCH 1/2] xserver-nodm-init: use /etc/X11/Xserver from service file instead of Xorg directly
In reply to Martin JansaQuoted 2 lines · Martin Jansa
*
/etc/X11/Xserveris provided by xserver-common and sets correct DPI before starting Xorg (or other xserver)
This breaks the images using systemd only as it depends on init.d/functions now.
Signature · 3 lines
Otavio Salvador O.S. Systems E-mail: [email protected] http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br
Re: [meta-oe][PATCH 1/2] xserver-nodm-init: use /etc/X11/Xserver from service file instead of Xorg directly
Quoted 5 lines · Otavio Salvador
Quoted 2 lines · Martin Jansa
*
/etc/X11/Xserveris provided by xserver-common and sets correct DPI before starting Xorg (or other xserver)This breaks the images using systemd only as it depends on init.d/functions now.
Ah sorry I still had initscripts around in systemd image, please test following patch. I'm sending all those changes also to florian to apply them upstream so maybe we'll drop them from meta-oe and use 1.35 instead later.
Cheers,
Quoted 10 lines
Signature · 9 lines
-- Otavio Salvador O.S. Systems E-mail: [email protected] http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Signature · 1 line
Martin 'JaMa' Jansa jabber: [email protected]
PATCH 1/1 xserver-common: use git patches and add functions file
* otherwise we were depending on initscripts to provide it without RDEPENDing on it
--- .../0001-COPYING-add-GPLv2-license-file.patch | 364 ++++++++++++++++++++ .../0002-add-setdpi-Xinit.d-script.patch | 112 ++++++ ...0003-add-89xdgautostart-Xsession.d-script.patch | 29 ++ ...brate_xinput_calibrator-Xsession.d-script.patch | 27 ++ ...0005-add-XWindowManager-Xsession.d-script.patch | 26 ++ ...06-add-support-for-etc-X11-xserver-system.patch | 26 ++ ...nctions-file-instead-etc-init.d-functions.patch | 87 +++++ ...mon-add-dpi-and-nocursor-params-for-gta01.patch | 40 +++ ...mon-add-support-for-n900-alias-nokia_rx-5.patch | 32 ++ ...mon-add-support-for-nexus-S-alias-herring.patch | 27 ++ ...mon-add-support-for-nexus-one-alias-mahim.patch | 28 ++ ...mon-add-support-for-gta04-alias-OpenPhoen.patch | 33 ++ .../89xTs_Calibrate.xinput_calibrator.patch | 12 - .../xserver-common-1.34/89xdgautostart.sh | 9 - .../xserver-common-1.34/90xXWindowManager.patch | 11 - .../Xserver.add.dpi.for.gta.patch | 29 -- .../Xserver.add.nocursor.for.gta.patch | 20 - .../Xserver.add.xserver-system.patch | 12 - .../xserver-common-1.34/Xserver.gta04.patch | 32 -- .../xserver-common-1.34/Xserver.n900.patch | 17 - .../xserver-common-1.34/Xserver.nexusone.patch | 14 - .../xserver-common-1.34/Xserver.nexuss.patch | 14 - .../xserver-common-1.34/gplv2-license.patch | 353 ------------------- .../xserver-common/xserver-common-1.34/setDPI.sh | 92 ----- .../xserver-common/xserver-common_1.34.bb | 29 +- 25 files changed, 844 insertions(+), 631 deletions(-) create mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0001-COPYING-add-GPLv2-license-file.patch create mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0002-add-setdpi-Xinit.d-script.patch create mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0003-add-89xdgautostart-Xsession.d-script.patch create mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0004-add-Ts_Calibrate_xinput_calibrator-Xsession.d-script.patch create mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0005-add-XWindowManager-Xsession.d-script.patch create mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0006-add-support-for-etc-X11-xserver-system.patch create mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0007-use-own-functions-file-instead-etc-init.d-functions.patch create mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0008-xserver-common-add-dpi-and-nocursor-params-for-gta01.patch create mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0009-xserver-common-add-support-for-n900-alias-nokia_rx-5.patch create mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0010-xserver-common-add-support-for-nexus-S-alias-herring.patch create mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0011-xserver-common-add-support-for-nexus-one-alias-mahim.patch create mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0012-xserver-common-add-support-for-gta04-alias-OpenPhoen.patch delete mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/89xTs_Calibrate.xinput_calibrator.patch delete mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/89xdgautostart.sh delete mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/90xXWindowManager.patch delete mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/Xserver.add.dpi.for.gta.patch delete mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/Xserver.add.nocursor.for.gta.patch delete mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/Xserver.add.xserver-system.patch delete mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/Xserver.gta04.patch delete mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/Xserver.n900.patch delete mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/Xserver.nexusone.patch delete mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/Xserver.nexuss.patch delete mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/gplv2-license.patch delete mode 100644 meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/setDPI.sh
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0001-COPYING-add-GPLv2-license-file.patch new file +364 -0
@@ -0,0 +1,364 @@ +From 834fa06920f88ceedf752964c8e296c653d541e4 Mon Sep 17 00:00:00 2001 +From: Yu Ke <[email protected]> +Date: Wed, 11 Apr 2012 14:26:16 +0200 +Subject: [PATCH 01/12] COPYING: add GPLv2 license file + +this is a local file recipe and the license file is missing.In order +to pass the license checksum checking, the license file is needed. So +this patch add the GPLv2 license file. + +Signed-off-by: Yu Ke <[email protected]> +Signed-off-by: Martin Jansa <[email protected]> +--- + COPYING | 339 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + 1 files changed, 339 insertions(+), 0 deletions(-) + create mode 100644 COPYING + +diff --git a/COPYING b/COPYING +new file mode 100644 +index 0000000..d511905 +--- /dev/null ++++ b/COPYING +@@ -0,0 +1,339 @@ ++ GNU GENERAL PUBLIC LICENSE ++ Version 2, June 1991 ++ ++ Copyright (C) 1989, 1991 Free Software Foundation, Inc., ++ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ++ Everyone is permitted to copy and distribute verbatim copies ++ of this license document, but changing it is not allowed. ++ ++ Preamble ++ ++ The licenses for most software are designed to take away your ++freedom to share and change it. By contrast, the GNU General Public ++License is intended to guarantee your freedom to share and change free ++software--to make sure the software is free for all its users. This ++General Public License applies to most of the Free Software ++Foundation's software and to any other program whose authors commit to ++using it. (Some other Free Software Foundation software is covered by ++the GNU Lesser General Public License instead.) You can apply it to ++your programs, too. ++ ++ When we speak of free software, we are referring to freedom, not ++price. Our General Public Licenses are designed to make sure that you ++have the freedom to distribute copies of free software (and charge for ++this service if you wish), that you receive source code or can get it ++if you want it, that you can change the software or use pieces of it ++in new free programs; and that you know you can do these things. ++ ++ To protect your rights, we need to make restrictions that forbid ++anyone to deny you these rights or to ask you to surrender the rights. ++These restrictions translate to certain responsibilities for you if you ++distribute copies of the software, or if you modify it. ++ ++ For example, if you distribute copies of such a program, whether ++gratis or for a fee, you must give the recipients all the rights that ++you have. You must make sure that they, too, receive or can get the ++source code. And you must show them these terms so they know their ++rights. ++ ++ We protect your rights with two steps: (1) copyright the software, and ++(2) offer you this license which gives you legal permission to copy, ++distribute and/or modify the software. ++ ++ Also, for each author's protection and ours, we want to make certain ++that everyone understands that there is no warranty for this free ++software. If the software is modified by someone else and passed on, we ++want its recipients to know that what they have is not the original, so ++that any problems introduced by others will not reflect on the original ++authors' reputations. ++ ++ Finally, any free program is threatened constantly by software ++patents. We wish to avoid the danger that redistributors of a free ++program will individually obtain patent licenses, in effect making the ++program proprietary. To prevent this, we have made it clear that any ++patent must be licensed for everyone's free use or not licensed at all. ++ ++ The precise terms and conditions for copying, distribution and ++modification follow. ++ ++ GNU GENERAL PUBLIC LICENSE ++ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION ++ ++ 0. This License applies to any program or other work which contains ++a notice placed by the copyright holder saying it may be distributed ++under the terms of this General Public License. The "Program", below, ++refers to any such program or work, and a "work based on the Program" ++means either the Program or any derivative work under copyright law: ++that is to say, a work containing the Program or a portion of it, ++either verbatim or with modifications and/or translated into another ++language. (Hereinafter, translation is included without limitation in ++the term "modification".) Each licensee is addressed as "you". ++ ++Activities other than copying, distribution and modification are not ++covered by this License; they are outside its scope. The act of ++running the Program is not restricted, and the output from the Program ++is covered only if its contents constitute a work based on the ++Program (independent of having been made by running the Program). ++Whether that is true depends on what the Program does. ++ ++ 1. You may copy and distribute verbatim copies of the Program's ++source code as you receive it, in any medium, provided that you ++conspicuously and appropriately publish on each copy an appropriate ++copyright notice and disclaimer of warranty; keep intact all the ++notices that refer to this License and to the absence of any warranty; ++and give any other recipients of the Program a copy of this License ++along with the Program. ++ ++You may charge a fee for the physical act of transferring a copy, and ++you may at your option offer warranty protection in exchange for a fee. ++ ++ 2. You may modify your copy or copies of the Program or any portion ++of it, thus forming a work based on the Program, and copy and ++distribute such modifications or work under the terms of Section 1 ++above, provided that you also meet all of these conditions: ++ ++ a) You must cause the modified files to carry prominent notices ++ stating that you changed the files and the date of any change. ++ ++ b) You must cause any work that you distribute or publish, that in ++ whole or in part contains or is derived from the Program or any ++ part thereof, to be licensed as a whole at no charge to all third ++ parties under the terms of this License. ++ ++ c) If the modified program normally reads commands interactively ++ when run, you must cause it, when started running for such ++ interactive use in the most ordinary way, to print or display an ++ announcement including an appropriate copyright notice and a ++ notice that there is no warranty (or else, saying that you provide ++ a warranty) and that users may redistribute the program under ++ these conditions, and telling the user how to view a copy of this ++ License. (Exception: if the Program itself is interactive but ++ does not normally print such an announcement, your work based on ++ the Program is not required to print an announcement.) ++ ++These requirements apply to the modified work as a whole. If ++identifiable sections of that work are not derived from the Program, ++and can be reasonably considered independent and separate works in ++themselves, then this License, and its terms, do not apply to those ++sections when you distribute them as separate works. But when you ++distribute the same sections as part of a whole which is a work based ++on the Program, the distribution of the whole must be on the terms of ++this License, whose permissions for other licensees extend to the ++entire whole, and thus to each and every part regardless of who wrote it. ++ ++Thus, it is not the intent of this section to claim rights or contest ++your rights to work written entirely by you; rather, the intent is to ++exercise the right to control the distribution of derivative or ++collective works based on the Program. ++ ++In addition, mere aggregation of another work not based on the Program ++with the Program (or with a work based on the Program) on a volume of ++a storage or distribution medium does not bring the other work under ++the scope of this License. ++ ++ 3. You may copy and distribute the Program (or a work based on it, ++under Section 2) in object code or executable form under the terms of ++Sections 1 and 2 above provided that you also do one of the following: ++ ++ a) Accompany it with the complete corresponding machine-readable ++ source code, which must be distributed under the terms of Sections ++ 1 and 2 above on a medium customarily used for software interchange; or, ++ ++ b) Accompany it with a written offer, valid for at least three ++ years, to give any third party, for a charge no more than your ++ cost of physically performing source distribution, a complete ++ machine-readable copy of the corresponding source code, to be ++ distributed under the terms of Sections 1 and 2 above on a medium ++ customarily used for software interchange; or, ++ ++ c) Accompany it with the information you received as to the offer ++ to distribute corresponding source code. (This alternative is ++ allowed only for noncommercial distribution and only if you ++ received the program in object code or executable form with such ++ an offer, in accord with Subsection b above.) ++ ++The source code for a work means the preferred form of the work for ++making modifications to it. For an executable work, complete source ++code means all the source code for all modules it contains, plus any ++associated interface definition files, plus the scripts used to ++control compilation and installation of the executable. However, as a ++special exception, the source code distributed need not include ++anything that is normally distributed (in either source or binary ++form) with the major components (compiler, kernel, and so on) of the ++operating system on which the executable runs, unless that component ++itself accompanies the executable. ++ ++If distribution of executable or object code is made by offering ++access to copy from a designated place, then offering equivalent ++access to copy the source code from the same place counts as ++distribution of the source code, even though third parties are not ++compelled to copy the source along with the object code. ++ ++ 4. You may not copy, modify, sublicense, or distribute the Program ++except as expressly provided under this License. Any attempt ++otherwise to copy, modify, sublicense or distribute the Program is ++void, and will automatically terminate your rights under this License. ++However, parties who have received copies, or rights, from you under ++this License will not have their licenses terminated so long as such ++parties remain in full compliance. ++ ++ 5. You are not required to accept this License, since you have not ++signed it. However, nothing else grants you permission to modify or ++distribute the Program or its derivative works. These actions are ++prohibited by law if you do not accept this License. Therefore, by ++modifying or distributing the Program (or any work based on the ++Program), you indicate your acceptance of this License to do so, and ++all its terms and conditions for copying, distributing or modifying ++the Program or works based on it. ++ ++ 6. Each time you redistribute the Program (or any work based on the ++Program), the recipient automatically receives a license from the ++original licensor to copy, distribute or modify the Program subject to ++these terms and conditions. You may not impose any further ++restrictions on the recipients' exercise of the rights granted herein. ++You are not responsible for enforcing compliance by third parties to ++this License. ++ ++ 7. If, as a consequence of a court judgment or allegation of patent ++infringement or for any other reason (not limited to patent issues), ++conditions are imposed on you (whether by court order, agreement or ++otherwise) that contradict the conditions of this License, they do not ++excuse you from the conditions of this License. If you cannot ++distribute so as to satisfy simultaneously your obligations under this ++License and any other pertinent obligations, then as a consequence you ++may not distribute the Program at all. For example, if a patent ++license would not permit royalty-free redistribution of the Program by ++all those who receive copies directly or indirectly through you, then ++the only way you could satisfy both it and this License would be to ++refrain entirely from distribution of the Program. ++ ++If any portion of this section is held invalid or unenforceable under ++any particular circumstance, the balance of the section is intended to ++apply and the section as a whole is intended to apply in other ++circumstances. ++ ++It is not the purpose of this section to induce you to infringe any ++patents or other property right claims or to contest validity of any ++such claims; this section has the sole purpose of protecting the ++integrity of the free software distribution system, which is ++implemented by public license practices. Many people have made ++generous contributions to the wide range of software distributed ++through that system in reliance on consistent application of that ++system; it is up to the author/donor to decide if he or she is willing ++to distribute software through any other system and a licensee cannot ++impose that choice. ++ ++This section is intended to make thoroughly clear what is believed to ++be a consequence of the rest of this License. ++ ++ 8. If the distribution and/or use of the Program is restricted in ++certain countries either by patents or by copyrighted interfaces, the ++original copyright holder who places the Program under this License ++may add an explicit geographical distribution limitation excluding ++those countries, so that distribution is permitted only in or among ++countries not thus excluded. In such case, this License incorporates ++the limitation as if written in the body of this License. ++ ++ 9. The Free Software Foundation may publish revised and/or new versions ++of the General Public License from time to time. Such new versions will ++be similar in spirit to the present version, but may differ in detail to ++address new problems or concerns. ++ ++Each version is given a distinguishing version number. If the Program ++specifies a version number of this License which applies to it and "any ++later version", you have the option of following the terms and conditions ++either of that version or of any later version published by the Free ++Software Foundation. If the Program does not specify a version number of ++this License, you may choose any version ever published by the Free Software ++Foundation. ++ ++ 10. If you wish to incorporate parts of the Program into other free ++programs whose distribution conditions are different, write to the author ++to ask for permission. For software which is copyrighted by the Free ++Software Foundation, write to the Free Software Foundation; we sometimes ++make exceptions for this. Our decision will be guided by the two goals ++of preserving the free status of all derivatives of our free software and ++of promoting the sharing and reuse of software generally. ++ ++ NO WARRANTY ++ ++ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY ++FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN ++OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES ++PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED ++OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS ++TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE ++PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, ++REPAIR OR CORRECTION. ++ ++ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING ++WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR ++REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, ++INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING ++OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED ++TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY ++YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER ++PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE ++POSSIBILITY OF SUCH DAMAGES. ++ ++ END OF TERMS AND CONDITIONS ++ ++ How to Apply These Terms to Your New Programs ++ ++ If you develop a new program, and you want it to be of the greatest ++possible use to the public, the best way to achieve this is to make it ++free software which everyone can redistribute and change under these terms. ++ ++ To do so, attach the following notices to the program. It is safest ++to attach them to the start of each source file to most effectively ++convey the exclusion of warranty; and each file should have at least ++the "copyright" line and a pointer to where the full notice is found. ++ ++ <one line to give the program's name and a brief idea of what it does.> ++ Copyright (C) <year> <name of author> ++ ++ This program is free software; you can redistribute it and/or modify ++ it under the terms of the GNU General Public License as published by ++ the Free Software Foundation; either version 2 of the License, or ++ (at your option) any later version. ++ ++ This program is distributed in the hope that it will be useful, ++ but WITHOUT ANY WARRANTY; without even the implied warranty of ++ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ GNU General Public License for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. ++ ++Also add information on how to contact you by electronic and paper mail. ++ ++If the program is interactive, make it output a short notice like this ++when it starts in an interactive mode: ++ ++ Gnomovision version 69, Copyright (C) year name of author ++ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. ++ This is free software, and you are welcome to redistribute it ++ under certain conditions; type `show c' for details. ++ ++The hypothetical commands `show w' and `show c' should show the appropriate ++parts of the General Public License. Of course, the commands you use may ++be called something other than `show w' and `show c'; they could even be ++mouse-clicks or menu items--whatever suits your program. ++ ++You should also get your employer (if you work as a programmer) or your ++school, if any, to sign a "copyright disclaimer" for the program, if ++necessary. Here is a sample; alter the names: ++ ++ Yoyodyne, Inc., hereby disclaims all copyright interest in the program ++ `Gnomovision' (which makes passes at compilers) written by James Hacker. ++ ++ <signature of Ty Coon>, 1 April 1989 ++ Ty Coon, President of Vice ++ ++This General Public License does not permit incorporating your program into ++proprietary programs. If your program is a subroutine library, you may ++consider it more useful to permit linking proprietary applications with the ++library. If this is what you want to do, use the GNU Lesser General ++Public License instead of this License. +-- +1.7.8.5 +
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0002-add-setdpi-Xinit.d-script.patch new file +112 -0
112 lines not on this page · raw message
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0003-add-89xdgautostart-Xsession.d-script.patch new file +29 -0
@@ -0,0 +1,29 @@ +From a93a86c2ff1ca5eb35615f4e1568409ff342aa7f Mon Sep 17 00:00:00 2001 +From: Martin Jansa <[email protected]> +Date: Wed, 11 Apr 2012 14:29:41 +0200 +Subject: [PATCH 03/12] add 89xdgautostart Xsession.d script + +Signed-off-by: Martin Jansa <[email protected]> +--- + X11/Xsession.d/89xdgautostart | 9 +++++++++ + 1 files changed, 9 insertions(+), 0 deletions(-) + create mode 100644 X11/Xsession.d/89xdgautostart + +diff --git a/X11/Xsession.d/89xdgautostart b/X11/Xsession.d/89xdgautostart +new file mode 100644 +index 0000000..9886f9f +--- /dev/null ++++ b/X11/Xsession.d/89xdgautostart +@@ -0,0 +1,9 @@ ++#!/bin/sh ++ ++XDGAUTOSTART=/etc/xdg/autostart ++if [ -d $XDGAUTOSTART ] ; then ++ for SCRIPT in $XDGAUTOSTART/*; do ++ CMD=`grep ^Exec= $SCRIPT | cut -d '=' -f 2` ++ $CMD & ++ done ++fi +-- +1.7.8.5 +
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0004-add-Ts_Calibrate_xinput_calibrator-Xsession.d-script.patch new file +27 -0
@@ -0,0 +1,27 @@ +From 2877156d5bbc11f8d8e8d6aafd138173d2a4bd3b Mon Sep 17 00:00:00 2001 +From: Martin Jansa <[email protected]> +Date: Wed, 11 Apr 2012 14:31:34 +0200 +Subject: [PATCH 04/12] add Ts_Calibrate_xinput_calibrator Xsession.d script + +Signed-off-by: Martin Jansa <[email protected]> +--- + X11/Xsession.d/89xTs_Calibrate_xinput_calibrator | 7 +++++++ + 1 files changed, 7 insertions(+), 0 deletions(-) + create mode 100644 X11/Xsession.d/89xTs_Calibrate_xinput_calibrator + +diff --git a/X11/Xsession.d/89xTs_Calibrate_xinput_calibrator b/X11/Xsession.d/89xTs_Calibrate_xinput_calibrator +new file mode 100644 +index 0000000..6ef4d1e +--- /dev/null ++++ b/X11/Xsession.d/89xTs_Calibrate_xinput_calibrator +@@ -0,0 +1,7 @@ ++#!/bin/sh ++ ++if [ -e /usr/bin/xinput_calibrator_once.sh ] ; then ++ if [ -e /etc/pointercal.xinput ] ; then ++ /usr/bin/xinput_calibrator_once.sh ++ fi ++fi +-- +1.7.8.5 +
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0005-add-XWindowManager-Xsession.d-script.patch new file +26 -0
@@ -0,0 +1,26 @@ +From b01a532ebb525552e23d7169a2aeb55c42b3ec99 Mon Sep 17 00:00:00 2001 +From: Martin Jansa <[email protected]> +Date: Wed, 11 Apr 2012 14:32:13 +0200 +Subject: [PATCH 05/12] add XWindowManager Xsession.d script + +Signed-off-by: Martin Jansa <[email protected]> +--- + X11/Xsession.d/90xXWindowManager | 6 ++++++ + 1 files changed, 6 insertions(+), 0 deletions(-) + create mode 100644 X11/Xsession.d/90xXWindowManager + +diff --git a/X11/Xsession.d/90xXWindowManager b/X11/Xsession.d/90xXWindowManager +new file mode 100644 +index 0000000..3df8435 +--- /dev/null ++++ b/X11/Xsession.d/90xXWindowManager +@@ -0,0 +1,6 @@ ++#!/bin/sh ++if [ -x $HOME/.Xsession ]; then ++ exec $HOME/.Xsession ++else ++ exec /usr/bin/x-window-manager ++fi +-- +1.7.8.5 +
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0006-add-support-for-etc-X11-xserver-system.patch new file +26 -0
@@ -0,0 +1,26 @@ +From 0c42e1fb84cc2bfe768bed17f3b979aca868cf64 Mon Sep 17 00:00:00 2001 +From: Martin Jansa <[email protected]> +Date: Wed, 11 Apr 2012 14:34:43 +0200 +Subject: [PATCH 06/12] add support for /etc/X11/xserver-system + +Signed-off-by: Martin Jansa <[email protected]> +--- + X11/xserver-common | 5 +++++ + 1 files changed, 5 insertions(+), 0 deletions(-) + +diff --git a/X11/xserver-common b/X11/xserver-common +index 4c7ed6e..6d8c9df 100644 +--- a/X11/xserver-common ++++ b/X11/xserver-common +@@ -204,3 +204,8 @@ fi + if [ "$XSERVER" != "Xorg" ] ; then + ARGS="$ARGS $MOUSE $KDRIVEARGS" + fi ++ ++# let a local script modify the variables ++if [ -e /etc/X11/xserver-system ] ; then ++ . /etc/X11/xserver-system ++fi +-- +1.7.8.5 +
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0007-use-own-functions-file-instead-etc-init.d-functions.patch new file +87 -0
87 lines not on this page · raw message
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0008-xserver-common-add-dpi-and-nocursor-params-for-gta01.patch new file +40 -0
@@ -0,0 +1,40 @@ +From 0ee7bf87e0c83abc79de3a99dfa3c87dd5c5b229 Mon Sep 17 00:00:00 2001 +From: Martin Jansa <[email protected]> +Date: Wed, 11 Apr 2012 14:37:29 +0200 +Subject: [PATCH 08/12] xserver-common: add dpi and nocursor params for gta01 + and gta02 + +Signed-off-by: Martin Jansa <[email protected]> +--- + X11/xserver-common | 8 ++++++-- + 1 files changed, 6 insertions(+), 2 deletions(-) + +diff --git a/X11/xserver-common b/X11/xserver-common +index de92bb7..f76fa5f 100644 +--- a/X11/xserver-common ++++ b/X11/xserver-common +@@ -133,15 +133,19 @@ else + ARGS="$ARGS -screen ${SCREEN_SIZE}" + DPI="225" ;; + "gta01" ) +- DPI="285" ++ DPI="280" + if [ "$XSERVER" != "Xorg" ] ; then + ARGS="$ARGS -screen 480x640" ++ else ++ ARGS="$ARGS -dpi ${DPI} -nocursor" + fi + ;; + "gta02") +- DPI="285" ++ DPI="280" + if [ "$XSERVER" != "Xorg" ] ; then + ARGS="$ARGS -screen ${SCREEN_SIZE}" ++ else ++ ARGS="$ARGS -dpi ${DPI} -nocursor" + fi + ;; + "motorola_ezx_platform") +-- +1.7.8.5 +
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0009-xserver-common-add-support-for-n900-alias-nokia_rx-5.patch new file +32 -0
@@ -0,0 +1,32 @@ +From 6d6caecb7172b9b33e7364564b0e6eabf67b6e8b Mon Sep 17 00:00:00 2001 +From: Martin Jansa <[email protected]> +Date: Wed, 11 Apr 2012 14:40:14 +0200 +Subject: [PATCH 09/12] xserver-common: add support for n900 alias + nokia_rx-51_board + +Signed-off-by: Martin Jansa <[email protected]> +--- + X11/xserver-common | 7 +++++++ + 1 files changed, 7 insertions(+), 0 deletions(-) + +diff --git a/X11/xserver-common b/X11/xserver-common +index f76fa5f..86ed17f 100644 +--- a/X11/xserver-common ++++ b/X11/xserver-common +@@ -132,6 +132,13 @@ else + "nokia_n800" | "nokia_rx-44" | "nokia_n770") + ARGS="$ARGS -screen ${SCREEN_SIZE}" + DPI="225" ;; ++ "nokia_rx-51_board" ) ++ DPI="267" ++ if [ "$XSERVER" != "Xorg" ] ; then ++ ARGS="$ARGS -screen ${SCREEN_SIZE}" ++ else ++ ARGS="$ARGS -dpi ${DPI} -nocursor" ++ fi ;; + "gta01" ) + DPI="280" + if [ "$XSERVER" != "Xorg" ] ; then +-- +1.7.8.5 +
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0010-xserver-common-add-support-for-nexus-S-alias-herring.patch new file +27 -0
@@ -0,0 +1,27 @@ +From 52003e6b52b1417c1a0e57243d83349addcdacf6 Mon Sep 17 00:00:00 2001 +From: Martin Jansa <[email protected]> +Date: Wed, 11 Apr 2012 14:40:44 +0200 +Subject: [PATCH 10/12] xserver-common: add support for nexus S alias herring + +Signed-off-by: Martin Jansa <[email protected]> +--- + X11/xserver-common | 3 +++ + 1 files changed, 3 insertions(+), 0 deletions(-) + +diff --git a/X11/xserver-common b/X11/xserver-common +index 86ed17f..5c9a6eb 100644 +--- a/X11/xserver-common ++++ b/X11/xserver-common +@@ -126,6 +126,9 @@ else + "htc_tornado") + ARGS="$ARGS -hide-cursor" + DPI="100" ;; ++ "herring") ++ DPI="235" ++ ARGS="$ARGS -dpi ${DPI} -nocursor";; + "generic_omap1510/1610/1710") + ARGS="$ARGS -screen ${SCREEN_SIZE}" + DPI="225" ;; +-- +1.7.8.5 +
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0011-xserver-common-add-support-for-nexus-one-alias-mahim.patch new file +28 -0
@@ -0,0 +1,28 @@ +From 0ecc978b7d8cb6867646fb2a29523ebef3afa016 Mon Sep 17 00:00:00 2001 +From: Martin Jansa <[email protected]> +Date: Wed, 11 Apr 2012 14:41:06 +0200 +Subject: [PATCH 11/12] xserver-common: add support for nexus one alias + mahimahi + +Signed-off-by: Martin Jansa <[email protected]> +--- + X11/xserver-common | 3 +++ + 1 files changed, 3 insertions(+), 0 deletions(-) + +diff --git a/X11/xserver-common b/X11/xserver-common +index 5c9a6eb..55594fd 100644 +--- a/X11/xserver-common ++++ b/X11/xserver-common +@@ -129,6 +129,9 @@ else + "herring") + DPI="235" + ARGS="$ARGS -dpi ${DPI} -nocursor";; ++ "mahimahi") ++ DPI="254" ++ ARGS="$ARGS -dpi ${DPI}";; + "generic_omap1510/1610/1710") + ARGS="$ARGS -screen ${SCREEN_SIZE}" + DPI="225" ;; +-- +1.7.8.5 +
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/0012-xserver-common-add-support-for-gta04-alias-OpenPhoen.patch new file +33 -0
@@ -0,0 +1,33 @@ +From d194f0302582f1ca599f2ea58c15e15f4fd6bdef Mon Sep 17 00:00:00 2001 +From: Martin Jansa <[email protected]> +Date: Wed, 11 Apr 2012 14:41:52 +0200 +Subject: [PATCH 12/12] xserver-common: add support for gta04 alias + OpenPhoenux + +Signed-off-by: Martin Jansa <[email protected]> +--- + X11/xserver-common | 8 ++++++++ + 1 files changed, 8 insertions(+), 0 deletions(-) + +diff --git a/X11/xserver-common b/X11/xserver-common +index 55594fd..434333e 100644 +--- a/X11/xserver-common ++++ b/X11/xserver-common +@@ -161,6 +161,14 @@ else + ARGS="$ARGS -dpi ${DPI} -nocursor" + fi + ;; ++ "gta04") ++ DPI="280" ++ if [ "$XSERVER" != "Xorg" ] ; then ++ ARGS="$ARGS -screen ${SCREEN_SIZE}" ++ else ++ ARGS="$ARGS -dpi ${DPI} -nocursor" ++ fi ++ ;; + "motorola_ezx_platform") + ARGS="$ARGS -screen 240x320" + DPI="170" ;; +-- +1.7.8.5 +
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/89xTs_Calibrate.xinput_calibrator.patch deleted +0 -12
@@ -1,12 +0,0 @@ -Index: xserver-common/X11/Xsession.d/89xTs_Calibrate_xinput_calibrator -=================================================================== ---- xserver-common/X11/Xsession.d/89xTs_Calibrate_xinput_calibrator (revision 0) -+++ xserver-common/X11/Xsession.d/89xTs_Calibrate_xinput_calibrator (revision 0) -@@ -0,0 +1,7 @@ -+#!/bin/sh -+ -+if [ -e /usr/bin/xinput_calibrator_once.sh ] ; then -+ if [ -e /etc/pointercal.xinput ] ; then -+ /usr/bin/xinput_calibrator_once.sh -+ fi -+fi
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/89xdgautostart.sh deleted +0 -9
@@ -1,9 +0,0 @@ -#!/bin/sh - -XDGAUTOSTART=/etc/xdg/autostart -if [ -d $XDGAUTOSTART ] ; then - for SCRIPT in $XDGAUTOSTART/*; do - CMD=`grep ^Exec= $SCRIPT | cut -d '=' -f 2` - $CMD & - done -fi
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/90xXWindowManager.patch deleted +0 -11
@@ -1,11 +0,0 @@ -Index: xserver-common/X11/Xsession.d/90xXWindowManager -=================================================================== ---- xserver-common/X11/Xsession.d/90xXWindowManager (revision 0) -+++ xserver-common/X11/Xsession.d/90xXWindowManager (revision 0) -@@ -0,0 +1,6 @@ -+#!/bin/sh -+if [ -x $HOME/.Xsession ]; then -+ exec $HOME/.Xsession -+else -+ exec /usr/bin/x-window-manager -+fi
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/Xserver.add.dpi.for.gta.patch deleted +0 -29
@@ -1,29 +0,0 @@ -xdpyinfo returns 96, but 285 is right value (but 280 is used as it renders 4 columns of illume icons instead of 3 and empty space) - -diff -uNr xserver-common-1.33.orig//X11/xserver-common xserver-common-1.33/X11/xserver-common ---- xserver-common-1.33.orig//X11/xserver-common 2010-04-28 23:27:10.000000000 +0200 -+++ xserver-common-1.33/X11/xserver-common 2010-04-28 23:29:07.000000000 +0200 -@@ -133,19 +133,19 @@ - ARGS="$ARGS -screen ${SCREEN_SIZE}" - DPI="225" ;; - "gta01" ) -- DPI="285" -+ DPI="280" - if [ "$XSERVER" != "Xorg" ] ; then - ARGS="$ARGS -screen 480x640" - else -- ARGS="$ARGS -nocursor" -+ ARGS="$ARGS -dpi ${DPI} -nocursor" - fi - ;; - "gta02") -- DPI="285" -+ DPI="280" - if [ "$XSERVER" != "Xorg" ] ; then - ARGS="$ARGS -screen ${SCREEN_SIZE}" - else -- ARGS="$ARGS -nocursor" -+ ARGS="$ARGS -dpi ${DPI} -nocursor" - fi - ;; - "motorola_ezx_platform")
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/Xserver.add.nocursor.for.gta.patch deleted +0 -20
@@ -1,20 +0,0 @@ -diff -uNr xserver-common-1.33.orig//X11/xserver-common xserver-common-1.33/X11/xserver-common ---- xserver-common-1.33.orig//X11/xserver-common 2010-04-28 10:44:23.000000000 +0200 -+++ xserver-common-1.33/X11/xserver-common 2010-04-28 10:46:41.000000000 +0200 -@@ -136,12 +136,16 @@ - DPI="285" - if [ "$XSERVER" != "Xorg" ] ; then - ARGS="$ARGS -screen 480x640" -+ else -+ ARGS="$ARGS -nocursor" - fi - ;; - "gta02") - DPI="285" - if [ "$XSERVER" != "Xorg" ] ; then - ARGS="$ARGS -screen ${SCREEN_SIZE}" -+ else -+ ARGS="$ARGS -nocursor" - fi - ;; - "motorola_ezx_platform")
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/Xserver.add.xserver-system.patch deleted +0 -12
@@ -1,12 +0,0 @@ -diff -uNr xserver-common-1.33.orig//X11/xserver-common xserver-common-1.33/X11/xserver-common ---- xserver-common-1.33.orig//X11/xserver-common 2010-04-28 23:27:10.000000000 +0200 -+++ xserver-common-1.33/X11/xserver-common 2010-04-28 23:29:07.000000000 +0200 -@@ -192,3 +196,8 @@ - if [ "$XSERVER" != "Xorg" ] ; then - ARGS="$ARGS $MOUSE" - fi -+ -+# let a local script modify the variables -+if [ -e /etc/X11/xserver-system ] ; then -+ . /etc/X11/xserver-system -+fi
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/Xserver.gta04.patch deleted +0 -32
@@ -1,32 +0,0 @@ -From 95d741d6849a2faddf8c1e930c7250ead90e7bed Mon Sep 17 00:00:00 2001 -From: Klaus Kurzmann <[email protected]> -Date: Thu, 20 Oct 2011 09:05:43 +0200 -Subject: [PATCH] gta04 - -Signed-off-by: Klaus Kurzmann <[email protected]> ---- - X11/xserver-common | 8 ++++++++ - 1 files changed, 8 insertions(+), 0 deletions(-) - -diff --git a/X11/xserver-common b/X11/xserver-common -index 448b262..208bbfd 100644 ---- a/X11/xserver-common -+++ b/X11/xserver-common -@@ -161,6 +161,14 @@ else - ARGS="$ARGS -dpi ${DPI} -nocursor" - fi - ;; -+ "gta04") -+ DPI="280" -+ if [ "$XSERVER" != "Xorg" ] ; then -+ ARGS="$ARGS -screen ${SCREEN_SIZE}" -+ else -+ ARGS="$ARGS -dpi ${DPI} -nocursor" -+ fi -+ ;; - "motorola_ezx_platform") - ARGS="$ARGS -screen 240x320" - DPI="170" ;; --- -1.7.7 -
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/Xserver.n900.patch deleted +0 -17
@@ -1,17 +0,0 @@ -diff -uri xserver-common-1.33.orig/X11/xserver-common xserver-common-1.33/X11/xserver-common ---- xserver-common-1.33.orig/X11/xserver-common 2010-09-14 17:10:35.955430177 +0200 -+++ xserver-common-1.33/X11/xserver-common 2010-09-14 17:17:12.484423440 +0200 -@@ -132,6 +132,13 @@ - "nokia_n800" | "nokia_rx-44" | "nokia_n770") - ARGS="$ARGS -screen ${SCREEN_SIZE}" - DPI="225" ;; -+ "nokia_rx-51_board" ) -+ DPI="267" -+ if [ "$XSERVER" != "Xorg" ] ; then -+ ARGS="$ARGS -screen ${SCREEN_SIZE}" -+ else -+ ARGS="$ARGS -dpi ${DPI} -nocursor" -+ fi ;; - "gta01" ) - DPI="280" - if [ "$XSERVER" != "Xorg" ] ; then
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/Xserver.nexusone.patch deleted +0 -14
@@ -1,14 +0,0 @@ -Index: xserver-common-1.34/X11/xserver-common -=================================================================== ---- xserver-common-1.34.orig/X11/xserver-common 2011-10-10 22:36:14.163129002 +0200 -+++ xserver-common-1.34/X11/xserver-common 2011-10-10 22:37:47.513129001 +0200 -@@ -129,6 +129,9 @@ - "herring") - DPI="235" - ARGS="$ARGS -dpi ${DPI} -nocursor";; -+ "mahimahi") -+ DPI="254" -+ ARGS="$ARGS -dpi ${DPI}";; - "generic_omap1510/1610/1710") - ARGS="$ARGS -screen ${SCREEN_SIZE}" - DPI="225" ;;
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/Xserver.nexuss.patch deleted +0 -14
@@ -1,14 +0,0 @@ -Index: xserver-common-1.34/X11/xserver-common -=================================================================== ---- xserver-common-1.34.orig/X11/xserver-common 2011-10-09 14:57:10.716896996 +0200 -+++ xserver-common-1.34/X11/xserver-common 2011-10-09 14:57:31.226897012 +0200 -@@ -126,6 +126,9 @@ - "htc_tornado") - ARGS="$ARGS -hide-cursor" - DPI="100" ;; -+ "herring") -+ DPI="235" -+ ARGS="$ARGS -dpi ${DPI} -nocursor";; - "generic_omap1510/1610/1710") - ARGS="$ARGS -screen ${SCREEN_SIZE}" - DPI="225" ;;
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/gplv2-license.patch deleted +0 -353
353 lines not on this page · raw message
meta-oe/recipes-graphics/xserver-common/xserver-common-1.34/setDPI.sh deleted +0 -92
92 lines not on this page · raw message
meta-oe/recipes-graphics/xserver-common/xserver-common_1.34.bb +13 -16
@@ -2,7 +2,7 @@ DESCRIPTION = "Common X11 scripts and support files" LICENSE = "GPLv2" LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe" -PR = "r5" +PR = "r6" # we are using a gpe-style Makefile inherit gpe
@@ -11,24 +11,21 @@ SRC_URI[md5sum] = "82f2f84cd96610e8f7b92c700cd31c14" SRC_URI[sha256sum] = "cd04c33418f776b1e13fcc7af3d6bd0c7cccd03fbabd7dbcd97f88166cc34210" SRC_URI_append = " \ - file://gplv2-license.patch \ - file://setDPI.sh \ - file://89xdgautostart.sh \ - file://89xTs_Calibrate.xinput_calibrator.patch \ - file://90xXWindowManager.patch \ - file://Xserver.add.xserver-system.patch \ - file://Xserver.add.nocursor.for.gta.patch \ - file://Xserver.add.dpi.for.gta.patch \ - file://Xserver.n900.patch \ - file://Xserver.nexuss.patch \ - file://Xserver.nexusone.patch \ - file://Xserver.gta04.patch \ + file://0001-COPYING-add-GPLv2-license-file.patch \ + file://0002-add-setdpi-Xinit.d-script.patch \ + file://0003-add-89xdgautostart-Xsession.d-script.patch \ + file://0004-add-Ts_Calibrate_xinput_calibrator-Xsession.d-script.patch \ + file://0005-add-XWindowManager-Xsession.d-script.patch \ + file://0006-add-support-for-etc-X11-xserver-system.patch \ + file://0007-use-own-functions-file-instead-etc-init.d-functions.patch \ + file://0008-xserver-common-add-dpi-and-nocursor-params-for-gta01.patch \ + file://0009-xserver-common-add-support-for-n900-alias-nokia_rx-5.patch \ + file://0010-xserver-common-add-support-for-nexus-S-alias-herring.patch \ + file://0011-xserver-common-add-support-for-nexus-one-alias-mahim.patch \ + file://0012-xserver-common-add-support-for-gta04-alias-OpenPhoen.patch \ " - do_install_append() { - install -m 0755 "${WORKDIR}/setDPI.sh" "${D}/etc/X11/Xinit.d/50setdpi" - install -m 0755 "${WORKDIR}/89xdgautostart.sh" "${D}/etc/X11/Xsession.d/89xdgautostart" sed -i 's:^BINDIR=.*$:BINDIR=${bindir}:' ${D}/etc/X11/xserver-common }
Signature · 1 line
1.7.8.5
Re: [PATCH] xserver-common: use git patches and add functions file
Quoted 3 lines · Martin Jansa
* otherwise we were depending on initscripts to provide it without RDEPENDing on it
Signed-off-by Martin Jansa <[email protected]>
Signature · 3 lines
Otavio Salvador O.S. Systems E-mail: [email protected] http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br