block: VHD format fixes
cover block: VHD format fixes
Fixes for a regression in vpc_create(), as well as a few issues with VHD format compatibility.
Jeff Cody (6):
block/vpc: fix VPC 'qemu-img create' regression block/vpc: use current_size field for XenConverter VHD images block/vpc: Use the correct max sector count for VHD images block/vpc: make checks on max table size a bit more lax block/vpc: set errp in vpc_open
block/vpc: update comments to be compliant w/coding guidelines
Stefan Hajnoczi (1):
vpc: use current_size field for XenServer VHD images
block/vpc.c | 106 ++++++++++++++++++++++++++++++++++-------------------------- 1 file changed, 60 insertions(+), 46 deletions(-)
Signature · 1 line
1.9.3
PATCH 1/7 block/vpc: fix VPC 'qemu-img create' regression
Commit 'b8f45cdf7827e39f9a1e6cc446f5972cc6144237' switched VPC over to using blk_pwrite() instead of bdrv_pwrite_sync(). The return value of bdrv_pwrite_sync() was always 0 for success, and create_dynamic_disk() in one instance checked for a non-zero return value to indicate error. However, blk_pwrite() may return positive values for success.
This fails silently as well, since vpc_create() did not set errp in this failuer case. Set errp in all instances in vpc_create().
--- block/vpc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
block/vpc.c +6 -1
@@ -774,7 +774,7 @@ static int create_dynamic_disk(BlockBackend *blk, uint8_t *buf, num_bat_entries = (total_sectors + block_size /512 ) / (block_size /512 ); ret =blk_pwrite (blk, offset, buf,HEADER_SIZE ); -if (ret) { +if (ret <0 ) { goto fail; }
@@ -873,6 +873,7 @@ static int vpc_create(const char *filename, QemuOpts *opts, Error **errp) }else if (!strcmp (disk_type_param,"fixed" )) { disk_type =VHD_FIXED ; }else { +error_setg (errp,"Invalid disk type, %s" , disk_type_param); ret = -EINVAL ; goto out; }
@@ -924,6 +925,7 @@ static int vpc_create(const char *filename, QemuOpts *opts, Error **errp) total_sectors = total_size /BDRV_SECTOR_SIZE ;/* Allow a maximum disk size of approximately 2 TB */ if (total_sectors >VHD_MAX_SECTORS ) { +error_setg (errp,"Disk size is too large, max size is 2040 GiB" ); ret = -EFBIG ; goto out; }
@@ -974,6 +976,9 @@ static int vpc_create(const char *filename, QemuOpts *opts, Error **errp) }else { ret =create_fixed_disk (blk, buf, total_size); } +if (ret <0 ) { +error_setg (errp,"Unable to create or write VHD header" ); + } out:blk_unref (blk);
Signature · 1 line
1.9.3
Re: [Qemu-devel] [PATCH for-2.6 1/7] block/vpc: fix VPC 'qemu-img create' regression
Quoted 2 lines · Jeff Cody
This fails silently as well, since
vpc_create()did not set errp in this failuer case. Set errp in all instances invpc_create().
s/faileur/failure/
Can be done when merging, no need to resend.
Re: [Qemu-devel] [PATCH for-2.6 1/7] block/vpc: fix VPC 'qemu-img create' regression
In reply to Jeff CodyQuoted 11 lines · Jeff Cody
Commit '
b8f45cdf7827e39f9a1e6cc446f5972cc6144237' switched VPC over to usingblk_pwrite()instead ofbdrv_pwrite_sync(). The return value ofbdrv_pwrite_sync()was always 0 for success, andcreate_dynamic_disk()in one instance checked for a non-zero return value to indicate error. However,blk_pwrite()may return positive values for success.This fails silently as well, since
vpc_create()did not set errp in this failuer case. Set errp in all instances invpc_create().Signed-off-by Jeff Cody <[email protected]>
Ping on this series - ideally the whole series for 2.6, but this patch in particular is needed for 2.6 to prevent a regression from 2.5 (QEMU can no longer create VPC/VHD images without this patch).
Quoted 46 lines
--- block/vpc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)block/vpc.c +6
-1@@ -774,7 +774,7 @@ static int create_dynamic_disk(BlockBackend *blk, uint8_t *buf, num_bat_entries = (total_sectors + block_size /512 ) / (block_size /512 ); ret =blk_pwrite (blk, offset, buf,HEADER_SIZE ); -if (ret) { +if (ret <0 ) { goto fail; }@@ -873,6 +873,7 @@ static int vpc_create(const char *filename, QemuOpts *opts, Error **errp) }else if (!strcmp (disk_type_param,"fixed" )) { disk_type =VHD_FIXED ; }else { +error_setg (errp,"Invalid disk type, %s" , disk_type_param); ret = -EINVAL ; goto out; }@@ -924,6 +925,7 @@ static int vpc_create(const char *filename, QemuOpts *opts, Error **errp) total_sectors = total_size /BDRV_SECTOR_SIZE ;/* Allow a maximum disk size of approximately 2 TB */ if (total_sectors >VHD_MAX_SECTORS ) { +error_setg (errp,"Disk size is too large, max size is 2040 GiB" ); ret = -EFBIG ; goto out; }@@ -974,6 +976,9 @@ static int vpc_create(const char *filename, QemuOpts *opts, Error **errp) }else { ret =create_fixed_disk (blk, buf, total_size); } +if (ret <0 ) { +error_setg (errp,"Unable to create or write VHD header" ); + } out:blk_unref (blk);Signature · 1 line
1.9.3
Re: [Qemu-devel] [PATCH for-2.6 1/7] block/vpc: fix VPC 'qemu-img create' regression
Am 13.04.2016 um 17:40 hat Jeff Cody geschrieben:
Quoted 8 lines · Jeff Cody
Quoted 7 lines
Commit '
b8f45cdf7827e39f9a1e6cc446f5972cc6144237' switched VPC over to usingblk_pwrite()instead ofbdrv_pwrite_sync(). The return value ofbdrv_pwrite_sync()was always 0 for success, andcreate_dynamic_disk()in one instance checked for a non-zero return value to indicate error. However,blk_pwrite()may return positive values for success.
Quoted 8 lines
Quoted 4 lines
This fails silently as well, since
vpc_create()did not set errp in this failuer case. Set errp in all instances invpc_create().Signed-off-by Jeff Cody <[email protected]>Ping on this series - ideally the whole series for 2.6, but this patch in particular is needed for 2.6 to prevent a regression from 2.5 (QEMU can no longer create VPC/VHD images without this patch).
The regression was already fixed in commit 40a99aac. With some changes in the commit message, the rest of this patch is still useful.
Kevin
PATCH 2/7 vpc: use current_size field for XenServer VHD images
In reply to Jeff CodyFrom: Stefan Hajnoczi <[email protected]>
The vpc driver has two methods of determining virtual disk size. The correct one to use depends on the software that generated the image file. Add the XenServer creator_app signature so that image size is correctly detected for those images.
--- block/vpc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
block/vpc.c +3 -1
@@ -298,6 +298,7 @@ static int vpc_open(BlockDriverState *bs, QDict *options, int flags,* 'qem2' : current_size QEMU (uses current_size) * 'win ' : current_size Hyper-V * 'd2v ' : current_size Disk2vhd +* 'tap\0' : current_size XenServer * * The user can override the table values via drive options, however * even with an override we will still use current_size for images
@@ -305,7 +306,8 @@ static int vpc_open(BlockDriverState *bs, QDict *options, int flags,*/ use_chs = (!!strncmp (footer->creator_app,"win " ,4 ) && !!strncmp (footer->creator_app,"qem2" ,4 ) && - !!strncmp (footer->creator_app,"d2v " ,4 )) || s->force_use_chs; + !!strncmp (footer->creator_app,"d2v " ,4 ) && + !!memcmp (footer->creator_app,"tap" ,4 )) || s->force_use_chs;if (!use_chs || bs->total_sectors ==VHD_MAX_GEOMETRY || s->force_use_sz) { bs->total_sectors = be64_to_cpu(footer->current_size) /
Signature · 1 line
1.9.3
PATCH 3/7 block/vpc: use current_size field for XenConverter VHD images
In reply to Jeff CodyXenConverter VHD images are another VHD image where current_size is different from the CHS values in the the format header. Use current_size as the default, by looking at the creator_app signature field.
--- block/vpc.c | 2 ++ 1 file changed, 2 insertions(+)
block/vpc.c +2 -0
@@ -299,6 +299,7 @@ static int vpc_open(BlockDriverState *bs, QDict *options, int flags,* 'win ' : current_size Hyper-V * 'd2v ' : current_size Disk2vhd * 'tap\0' : current_size XenServer +* 'CTXS' : current_size XenConverter * * The user can override the table values via drive options, however * even with an override we will still use current_size for images
@@ -307,6 +308,7 @@ static int vpc_open(BlockDriverState *bs, QDict *options, int flags, use_chs = (!!strncmp (footer->creator_app,"win " ,4 ) && !!strncmp (footer->creator_app,"qem2" ,4 ) && !!strncmp (footer->creator_app,"d2v " ,4 ) && + !!strncmp (footer->creator_app,"CTXS" ,4 ) && !!memcmp (footer->creator_app,"tap" ,4 )) || s->force_use_chs;if (!use_chs || bs->total_sectors ==VHD_MAX_GEOMETRY || s->force_use_sz) {
Signature · 1 line
1.9.3
PATCH 4/7 block/vpc: Use the correct max sector count for VHD images
In reply to Jeff CodyThe old VHD_MAX_SECTORS value is incorrect, and is a throwback to the CHS calculations. The VHD specification allows images up to 2040 GiB, which (using 512 byte sectors) corresponds to a maximum number of sectors of 0xff000000, rather than the old value of 0xfe0001ff.
Update VHD_MAX_SECTORS to reflect the correct value.
Also, update comment references to the actual size limit, and correct one compare so that we can have sizes up to the limit.
--- block/vpc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
block/vpc.c +5 -5
@@ -51,7 +51,7 @@ enum vhd_type {#define VHD_CHS_MAX_H 16#define VHD_CHS_MAX_S 255 -#define VHD_MAX_SECTORS (65535LL * 255 * 255) +#define VHD_MAX_SECTORS 0xff000000/* 2040 GiB max image size */ #define VHD_MAX_GEOMETRY (VHD_CHS_MAX_C * VHD_CHS_MAX_H * VHD_CHS_MAX_S)#define VPC_OPT_FORCE_SIZE "force_size"
@@ -316,8 +316,8 @@ static int vpc_open(BlockDriverState *bs, QDict *options, int flags,BDRV_SECTOR_SIZE ; } -/* Allow a maximum disk size of approximately 2 TB */ -if (bs->total_sectors >=VHD_MAX_SECTORS ) { +/* Allow a maximum disk size of 2040 GiB */ +if (bs->total_sectors >VHD_MAX_SECTORS ) { ret = -EFBIG ; goto fail; }
@@ -721,7 +721,7 @@ static int64_t coroutine_fn vpc_co_get_block_status(BlockDriverState *bs,* Note that the geometry doesn't always exactly match total_sectors but * may round it down. * -* Returns 0 on success, -EFBIG if the size is larger than ~2 TB. Override +* Returns 0 on success, -EFBIG if the size is larger than 2040 GiB. Override * the hardware EIDE and ATA-2 limit of 16 heads (max disk size of 127 GB) * and instead allow up to 255 heads. */
@@ -927,7 +927,7 @@ static int vpc_create(const char *filename, QemuOpts *opts, Error **errp)if ((int64_t )cyls * heads * secs_per_cyl ==VHD_MAX_GEOMETRY ) { total_sectors = total_size /BDRV_SECTOR_SIZE ; -/* Allow a maximum disk size of approximately 2 TB */ +/* Allow a maximum disk size of 2040 GiB */ if (total_sectors >VHD_MAX_SECTORS ) {error_setg (errp,"Disk size is too large, max size is 2040 GiB" ); ret = -EFBIG ;
Signature · 1 line
1.9.3
PATCH 5/7 block/vpc: make checks on max table size a bit more lax
In reply to Jeff CodyThe check on the max_table_size field not being larger than required is valid, and in accordance with the VHD spec. However, there have been VHD images encountered in the wild that have an out-of-spec max table size that is technically too large.
There is no issue in allowing this larger table size, as we also later verify that the computed size (used for the pagetable) is large enough to fit all sectors. In addition, max_table_entries is bounds checked against SIZE_MAX and INT_MAX.
Remove the strict check, so that we can accomodate these sorts of images that are benignly out of spec.
--- block/vpc.c | 4 ---- 1 file changed, 4 deletions(-)
block/vpc.c +0 -4
@@ -350,10 +350,6 @@ static int vpc_open(BlockDriverState *bs, QDict *options, int flags, ret = -EINVAL ; goto fail; } -if (s->max_table_entries > (VHD_MAX_SECTORS *512 ) / s->block_size) { - ret = -EINVAL ; - goto fail; - } computed_size = (uint64_t ) s->max_table_entries * s->block_size;if (computed_size < bs->total_sectors *512 ) {
Signature · 1 line
1.9.3
PATCH 6/7 block/vpc: set errp in vpc_open
In reply to Jeff CodyAdd more useful error information to failure paths in vpc_open
--- block/vpc.c | 9 +++++++++ 1 file changed, 9 insertions(+)
block/vpc.c +9 -0
@@ -237,6 +237,7 @@ static int vpc_open(BlockDriverState *bs, QDict *options, int flags, ret =bdrv_pread (bs->file->bs,0 , s->footer_buf,HEADER_SIZE );if (ret <0 ) { +error_setg (errp,"Unable to read VHD header" ); goto fail; }
@@ -245,9 +246,11 @@ static int vpc_open(BlockDriverState *bs, QDict *options, int flags,int64_t offset =bdrv_getlength (bs->file->bs);if (offset <0 ) { ret = offset; +error_setg (errp,"Invalid file size" ); goto fail; }else if (offset <HEADER_SIZE ) { ret = -EINVAL ; +error_setg (errp,"File too small for a VHD header" ); goto fail; }
@@ -326,12 +329,14 @@ static int vpc_open(BlockDriverState *bs, QDict *options, int flags, ret =bdrv_pread (bs->file->bs,be64_to_cpu (footer->data_offset), buf,HEADER_SIZE );if (ret <0 ) { +error_setg (errp,"Error reading dynamic VHD header" ); goto fail; } dyndisk_header = (VHDDynDiskHeader *) buf;if (strncmp (dyndisk_header->magic,"cxsparse" ,8 )) { +error_setg (errp,"Invalid header magic" ); ret = -EINVAL ; goto fail; }
@@ -347,12 +352,14 @@ static int vpc_open(BlockDriverState *bs, QDict *options, int flags, s->max_table_entries =be32_to_cpu (dyndisk_header->max_table_entries);if ((bs->total_sectors *512 ) / s->block_size >0xffffffffU ) { +error_setg (errp,"Too many blocks" ); ret = -EINVAL ; goto fail; } computed_size = (uint64_t ) s->max_table_entries * s->block_size;if (computed_size < bs->total_sectors *512 ) { +error_setg (errp,"Page table too small" ); ret = -EINVAL ; goto fail; }
@@ -369,6 +376,7 @@ static int vpc_open(BlockDriverState *bs, QDict *options, int flags, s->pagetable =qemu_try_blockalign (bs->file->bs, pagetable_size);if (s->pagetable ==NULL ) { +error_setg (errp,"Unable to allocate memory for page table" ); ret = -ENOMEM ; goto fail; }
@@ -378,6 +386,7 @@ static int vpc_open(BlockDriverState *bs, QDict *options, int flags, ret =bdrv_pread (bs->file->bs, s->bat_offset, s->pagetable, pagetable_size);if (ret <0 ) { +error_setg (errp,"Error reading pagetable" ); goto fail; }
Signature · 1 line
1.9.3
PATCH 7/7 block/vpc: update comments to be compliant w/coding guidelines
In reply to Jeff Cody--- block/vpc.c | 70 ++++++++++++++++++++++++++++++------------------------------- 1 file changed, 35 insertions(+), 35 deletions(-)
block/vpc.c +35 -35
@@ -36,7 +36,7 @@#define HEADER_SIZE 512 -//#define CACHE +/* #define CACHE */ enum vhd_type {VHD_FIXED =2 ,
@@ -44,7 +44,7 @@ enum vhd_type { VHD_DIFFERENCING = 4, }; -// Seconds since Jan 1, 2000 0:00:00 (UTC) +/* Seconds since Jan 1, 2000 0:00:00 (UTC) */ #define VHD_TIMESTAMP_BASE 946684800#define VHD_CHS_MAX_C 65535LL
@@ -56,22 +56,22 @@ enum vhd_type {#define VPC_OPT_FORCE_SIZE "force_size" -// always big-endian +/* always big-endian */ typedef struct vhd_footer { - char creator[8]; // "conectix" + char creator[8]; /* "conectix" */ uint32_t features; uint32_t version; - // Offset of next header structure, 0xFFFFFFFF if none + /* Offset of next header structure, 0xFFFFFFFF if none */ uint64_t data_offset; - // Seconds since Jan 1, 2000 0:00:00 (UTC) + /* Seconds since Jan 1, 2000 0:00:00 (UTC) */ uint32_t timestamp; - char creator_app[4]; // "vpc " + char creator_app[4]; /* e.g., "vpc " */ uint16_t major; uint16_t minor; - char creator_os[4]; // "Wi2k" + char creator_os[4]; /* "Wi2k" */ uint64_t orig_size; uint64_t current_size;
@@ -82,29 +82,29 @@ typedef struct vhd_footer {uint32_t type; -// Checksum of the Hard Disk Footer ("one's complement of the sum of all -// the bytes in the footer without the checksum field") +/* Checksum of the Hard Disk Footer ("one's complement of the sum of all +the bytes in the footer without the checksum field") */ uint32_t checksum; -// UUID used to identify a parent hard disk (backing file) +/* UUID used to identify a parent hard disk (backing file) */ uint8_t uuid[16 ];uint8_t in_saved_state; }QEMU_PACKED VHDFooter; typedef struct vhd_dyndisk_header { - char magic[8]; // "cxsparse" + char magic[8]; /* "cxsparse" */ - // Offset of next header structure, 0xFFFFFFFF if none + /* Offset of next header structure, 0xFFFFFFFF if none */ uint64_t data_offset; - // Offset of the Block Allocation Table (BAT) + /* Offset of the Block Allocation Table (BAT) */ uint64_t table_offset; uint32_t version; - uint32_t max_table_entries; // 32bit/entry + uint32_t max_table_entries; /* 32bit/entry */ - // 2 MB by default, must be a power of two + /* 2 MB by default, must be a power of two */ uint32_t block_size; uint32_t checksum;
@@ -112,7 +112,7 @@ typedef struct vhd_dyndisk_header {uint32_t parent_timestamp;uint32_t reserved; -// Backing file name (in UTF-16) +/* Backing file name (in UTF-16) */ uint8_t parent_name[512 ];struct {
@@ -277,9 +277,9 @@ static int vpc_open(BlockDriverState *bs, QDict *options, int flags,/* Write 'checksum' back to footer, or else will leave it with zero. */ footer->checksum =cpu_to_be32 (checksum); -// The visible size of a image in Virtual PC depends on the geometry -// rather than on the size stored in the footer (the size in the footer -// is too large usually) +/* The visible size of a image in Virtual PC depends on the geometry +rather than on the size stored in the footer (the size in the footer +is too large usually) */ bs->total_sectors = (int64_t )be16_to_cpu (footer->cyls) * footer->heads * footer->secs_per_cyl;
@@ -465,16 +465,16 @@ static inline int64_t get_sector_offset(BlockDriverState *bs, pageentry_index = (offset % s->block_size) /512 ;if (pagetable_index >= s->max_table_entries || s->pagetable[pagetable_index] ==0xffffffff ) -return -1 ;// not allocated +return -1 ;/* not allocated */ bitmap_offset =512 * (uint64_t ) s->pagetable[pagetable_index]; block_offset = bitmap_offset + s->bitmap_size + (512 * pageentry_index); -// We must ensure that we don't write to any sectors which are marked as -// unused in the bitmap. We get away with setting all bits in the block -// bitmap each time we write to a new block. This might cause Virtual PC to -// miss sparse read optimization, but it's not a problem in terms of -// correctness. +/* We must ensure that we don't write to any sectors which are marked as +unused in the bitmap. We get away with setting all bits in the block +bitmap each time we write to a new block. This might cause Virtual PC to +miss sparse read optimization, but it's not a problem in terms of +correctness. */ if (write && (s->last_bitmap_offset != bitmap_offset)) {uint8_t bitmap[s->bitmap_size];
@@ -520,18 +520,18 @@ static int64_t alloc_block(BlockDriverState* bs, int64_t sector_num)int ret;uint8_t bitmap[s->bitmap_size]; -// Check if sector_num is valid +/* Check if sector_num is valid */ if ((sector_num <0 ) || (sector_num > bs->total_sectors))return -1 ; -// Write entry into in-memory BAT +/* Write entry into in-memory BAT */ index = (sector_num *512 ) / s->block_size;if (s->pagetable[index] !=0xFFFFFFFF )return -1 ; s->pagetable[index] = s->free_data_block_offset /512 ; -// Initialize the block's bitmap +/* Initialize the block's bitmap */ memset (bitmap,0xff , s->bitmap_size); ret =bdrv_pwrite_sync (bs->file->bs, s->free_data_block_offset, bitmap, s->bitmap_size);
@@ -539,13 +539,13 @@ static int64_t alloc_block(BlockDriverState* bs, int64_t sector_num)return ret; } -// Write new footer (the old one will be overwritten) +/* Write new footer (the old one will be overwritten) */ s->free_data_block_offset += s->block_size + s->bitmap_size; ret =rewrite_footer (bs);if (ret <0 ) goto fail; -// Write BAT entry to disk +/* Write BAT entry to disk */ bat_offset = s->bat_offset + (4 * index); bat_value =cpu_to_be32 (s->pagetable[index]); ret =bdrv_pwrite_sync (bs->file->bs, bat_offset, &bat_value,4 );
@@ -778,7 +778,7 @@ static int create_dynamic_disk(BlockBackend *blk, uint8_t *buf,int ret;int64_t offset =0 ; -// Write the footer (twice: at the beginning and at the end) +/* Write the footer (twice: at the beginning and at the end) */ block_size =0x200000 ; num_bat_entries = (total_sectors + block_size /512 ) / (block_size /512 );
@@ -793,7 +793,7 @@ static int create_dynamic_disk(BlockBackend *blk, uint8_t *buf, goto fail; } -// Write the initial BAT +/* Write the initial BAT */ offset =3 *512 ;memset (buf,0xFF ,512 );
@@ -805,7 +805,7 @@ static int create_dynamic_disk(BlockBackend *blk, uint8_t *buf, offset +=512 ; } -// Prepare the Dynamic Disk Header +/* Prepare the Dynamic Disk Header */ memset (buf,0 ,1024 );memcpy (dyndisk_header->magic,"cxsparse" ,8 );
@@ -822,7 +822,7 @@ static int create_dynamic_disk(BlockBackend *blk, uint8_t *buf, dyndisk_header->checksum =cpu_to_be32 (vpc_checksum (buf,1024 )); -// Write the header +/* Write the header */ offset =512 ; ret =blk_pwrite (blk, offset, buf,1024 );
Signature · 1 line
1.9.3
Re: [Qemu-devel] [PATCH for-2.6 7/7] block/vpc: update comments to be compliant w/coding guidelines
Am 23.03.2016 um 04:33 hat Jeff Cody geschrieben:
Quoted 10 lines
Signed-off-by Jeff Cody <[email protected]>--- block/vpc.c | 70 ++++++++++++++++++++++++++++++------------------------------- 1 file changed, 35 insertions(+), 35 deletions(-)block/vpc.c +0
-0
block/vpc.c line 39
Quoted 5 lines
block/vpc.c +1
-1@@ -36,7 +36,7 @@#define HEADER_SIZE 512 -//#define CACHE +/* #define CACHE */
I'll revert this one while applying, C99 style is much more convenient when you want to enable debugging and we're doing the same in other places.
The rest of them is good.
Kevin
Quoted 12 lines · Jeff Cody
Fixes for a regression in
vpc_create(), as well as a few issues with VHD format compatibility.Jeff Cody (6):
block/vpc: fix VPC 'qemu-img create' regression block/vpc: usecurrent_sizefield for XenConverter VHD images block/vpc: Use the correct max sector count for VHD images block/vpc: make checks on max table size a bit more lax block/vpc: set errp invpc_open
block/vpc: update comments to be compliant w/coding guidelines
Quoted 9 lines
Stefan Hajnoczi (1):
vpc: usecurrent_sizefield for XenServer VHD imagesblock/vpc.c | 106 ++++++++++++++++++++++++++++++++++-------------------------- 1 file changed, 60 insertions(+), 46 deletions(-)Signature · 1 line
1.9.3
Kevin Wolf
AppliedAm 23.03.2016 um 04:33 hat Jeff Cody geschrieben:
Quoted 2 lines
Fixes for a regression in
vpc_create(), as well as a few issues with VHD format compatibility.
Thanks, applied to the block brannch.
Kevin