bridge: support sending rntl info when we set attributes through sysfs/ioctl
Subsystems (3)
v2 cover bridge: support sending rntl info when we set attributes through sysfs/ioctl
This patchset is used to support sending rntl info to user in some places, and ensure that whenever those attributes change internally or from sysfs, that a netlink notification is sent out to listeners.
It also make some adjustment in bridge sysfs so that we can implement this easily.
I've done some tests on this patchset, like:
[br_sysfs]
1. change all the attribute values of br or brif:
$ echo $value > /sys/class/net/br0/bridge/{*}
$ echo $value > /sys/class/net/br0/brif/eth1/{*}2. meanwhile, on another terminal to observe the msg:
$ bridge monitor
[br_ioctl]
1. in bridge-utils package, do some changes in br_set, let brctl command use ioctl to set attribute:
if ((ret = set_sysfs(path, value)) < 0) { -->
if (1) {$ brctl set*
2. meanwhile, on another terminal to observe the msg:
$ bridge monitor
This test covers all the attributes that brctl and sysfs support to set.
Xin Long (6):
bridge: simplify the flush_store by calling store_bridge_parm
bridge: simplify the forward_delay_store by calling store_bridge_parm
bridge: simplify the stp_state_store by calling store_bridge_parm
bridge: a netlink notification should be sent when those attributes
are changed by br_sysfs_br
bridge: a netlink notification should be sent when those attributes
are changed by br_sysfs_if
bridge: a netlink notification should be sent when those attributes
are changed by ioctl
net/bridge/br_ioctl.c | 40 +++++++++++++---------- net/bridge/br_sysfs_br.c | 83 +++++++++++++++++++----------------------------- net/bridge/br_sysfs_if.c | 5 +-- net/bridge/br_vlan.c | 30 +++-------------- 4 files changed, 65 insertions(+), 93 deletions(-)
Signature · 1 line
2.1.0
PATCH v2 1/6 bridge: simplify the flush_store by calling store_bridge_parm
There are some repetitive codes in flush_store, we can remove them by calling store_bridge_parm, also, it would send rtnl notification after we add it in store_bridge_parm in the following patches.
--- net/bridge/br_sysfs_br.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
net/bridge/br_sysfs_br.c +7 -7
@@ -336,17 +336,17 @@ static ssize_t group_addr_store(struct device *d,static DEVICE_ATTR_RW (group_addr); +static int set_flush (struct net_bridge *br,unsigned long val) +{ +br_fdb_flush (br); +return 0 ; +} +static ssize_t flush_store (struct device *d,struct device_attribute *attr,const char *buf,size_t len) { -struct net_bridge *br =to_bridge (d); - -if (!ns_capable (dev_net (br->dev)->user_ns,CAP_NET_ADMIN )) -return -EPERM ; - -br_fdb_flush (br); -return len; +return store_bridge_parm (d, buf, len, set_flush); }static DEVICE_ATTR_WO (flush);
Signature · 1 line
2.1.0
PATCH v2 2/6 bridge: simplify the forward_delay_store by calling store_bridge_parm
There are some repetitive codes in forward_delay_store, we can remove them by calling store_bridge_parm.
--- net/bridge/br_sysfs_br.c | 27 ++++++++++----------------- 1 file changed, 10 insertions(+), 17 deletions(-)
net/bridge/br_sysfs_br.c +10 -17
@@ -160,29 +160,22 @@ static ssize_t group_fwd_mask_show(struct device *d,return sprintf (buf,"%#x\n" , br->group_fwd_mask); } - -static ssize_t group_fwd_mask_store (struct device *d, -struct device_attribute *attr, -const char *buf, -size_t len) +static int set_group_fwd_mask (struct net_bridge *br,unsigned long val) { -struct net_bridge *br =to_bridge (d); -char *endp; -unsigned long val; - -if (!ns_capable (dev_net (br->dev)->user_ns,CAP_NET_ADMIN )) -return -EPERM ; - - val =simple_strtoul (buf, &endp,0 ); -if (endp == buf) -return -EINVAL ; -if (val &BR_GROUPFWD_RESTRICTED )return -EINVAL ; br->group_fwd_mask = val; -return len; +return 0 ; +} + +static ssize_t group_fwd_mask_store (struct device *d, +struct device_attribute *attr, +const char *buf, +size_t len) +{ +return store_bridge_parm (d, buf, len, set_group_fwd_mask); }static DEVICE_ATTR_RW (group_fwd_mask);
Signature · 1 line
2.1.0
PATCH v2 3/6 bridge: simplify the stp_state_store by calling store_bridge_parm
There are some repetitive codes in stp_state_store, we can remove them by calling store_bridge_parm.
--- net/bridge/br_sysfs_br.c | 24 +++++++----------------- 1 file changed, 7 insertions(+), 17 deletions(-)
net/bridge/br_sysfs_br.c +7 -17
@@ -128,27 +128,17 @@ static ssize_t stp_state_show(struct device *d, } +static int set_stp_state (struct net_bridge *br,unsigned long val) +{ +br_stp_set_enabled (br, val); +return 0 ; +} +static ssize_t stp_state_store (struct device *d,struct device_attribute *attr,const char *buf,size_t len) { -struct net_bridge *br =to_bridge (d); -char *endp; -unsigned long val; - -if (!ns_capable (dev_net (br->dev)->user_ns,CAP_NET_ADMIN )) -return -EPERM ; - - val =simple_strtoul (buf, &endp,0 ); -if (endp == buf) -return -EINVAL ; - -if (!rtnl_trylock ()) -return restart_syscall (); -br_stp_set_enabled (br, val); -rtnl_unlock (); - -return len; +return store_bridge_parm (d, buf, len, set_stp_state); }static DEVICE_ATTR_RW (stp_state);
Signature · 1 line
2.1.0
PATCH v2 4/6 bridge: a netlink notification should be sent when those attributes are changed by br_sysfs_br
Now when we change the attributes of bridge or br_port by netlink, a relevant netlink notification will be sent, but if we change them by ioctl or sysfs, no notification will be sent.
We should ensure that whenever those attributes change internally or from sysfs/ioctl, that a netlink notification is sent out to listeners.
Also, NetworkManager will use this in the future to listen for out-of-band bridge master attribute updates and incorporate them into the runtime configuration.
This patch is used for br_sysfs_br. and we also need to remove some rtnl_trylock in old functions so that we can call it in a common one.
For group_addr_store, we cannot make it use store_bridge_parm, because it's not a string-to-long convert, we will add notification on it individually.
--- net/bridge/br_sysfs_br.c | 18 +++++++++--------- net/bridge/br_vlan.c | 30 +++++------------------------- 2 files changed, 14 insertions(+), 34 deletions(-)
net/bridge/br_sysfs_br.c +9 -9
@@ -43,7 +43,14 @@ static ssize_t store_bridge_parm(struct device *d,if (endp == buf)return -EINVAL ; +if (!rtnl_trylock ()) +return restart_syscall (); + err = (*set)(br, val); +if (!err) +netdev_state_change (br->dev); +rtnl_unlock (); +return err ? err : len; }
@@ -101,15 +108,7 @@ static ssize_t ageing_time_show(struct device *d,static int set_ageing_time (struct net_bridge *br,unsigned long val) { -int ret; - -if (!rtnl_trylock ()) -return restart_syscall (); - - ret =br_set_ageing_time (br, val); -rtnl_unlock (); - -return ret; +return br_set_ageing_time (br, val); } static ssize_t ageing_time_store(struct device *d,
@@ -311,6 +310,7 @@ static ssize_t group_addr_store(struct device *d, br->group_addr_set = true;br_recalculate_fwd_mask (br); +netdev_state_change (br->dev);rtnl_unlock ();
net/bridge/br_vlan.c +5 -25
@@ -651,15 +651,7 @@ int __br_vlan_filter_toggle(struct net_bridge *br, unsigned long val)int br_vlan_filter_toggle (struct net_bridge *br,unsigned long val) { -int err; - -if (!rtnl_trylock ()) -return restart_syscall (); - - err =__br_vlan_filter_toggle (br, val); -rtnl_unlock (); - -return err; +return __br_vlan_filter_toggle (br, val); }int __br_vlan_set_proto (struct net_bridge *br,__be16 proto)
@@ -713,18 +705,10 @@ err_filt:int br_vlan_set_proto (struct net_bridge *br,unsigned long val) { -int err; -if (val !=ETH_P_8021Q && val !=ETH_P_8021AD )return -EPROTONOSUPPORT ; -if (!rtnl_trylock ()) -return restart_syscall (); - - err =__br_vlan_set_proto (br,htons (val)); -rtnl_unlock (); - -return err; +return __br_vlan_set_proto (br,htons (val)); }static bool vlan_default_pvid (struct net_bridge_vlan_group *vg,u16 vid)
@@ -855,21 +839,17 @@ int br_vlan_set_default_pvid(struct net_bridge *br, unsigned long val)if (val >=VLAN_VID_MASK )return -EINVAL ; -if (!rtnl_trylock ()) -return restart_syscall (); -if (pvid == br->default_pvid) - goto unlock; + goto out;/* Only allow default pvid change when filtering is disabled */ if (br->vlan_enabled) {pr_info_once ("Please disable vlan filtering to change default_pvid\n" ); err = -EPERM ; - goto unlock; + goto out; } err =__br_vlan_set_default_pvid (br, pvid); -unlock: -rtnl_unlock (); +out:return err; }
Signature · 1 line
2.1.0
PATCH v2 5/6 bridge: a netlink notification should be sent when those attributes are changed by br_sysfs_if
Now when we change the attributes of bridge or br_port by netlink, a relevant netlink notification will be sent, but if we change them by ioctl or sysfs, no notification will be sent.
We should ensure that whenever those attributes change internally or from sysfs/ioctl, that a netlink notification is sent out to listeners.
Also, NetworkManager will use this in the future to listen for out-of-band bridge master attribute updates and incorporate them into the runtime configuration.
This patch is used for br_sysfs_if, and we also move br_ifinfo_notify out of store_flag.
--- net/bridge/br_sysfs_if.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
net/bridge/br_sysfs_if.c +3 -2
@@ -61,7 +61,6 @@ static int store_flag(struct net_bridge_port *p, unsigned long v,if (flags != p->flags) { p->flags = flags;br_port_flags_change (p, mask); -br_ifinfo_notify (RTM_NEWLINK , p); }return 0 ; }
@@ -253,8 +252,10 @@ static ssize_t brport_store(struct kobject *kobj,spin_lock_bh (&p->br->lock); ret = brport_attr->store (p, val);spin_unlock_bh (&p->br->lock); -if (ret ==0 ) +if (!ret) { +br_ifinfo_notify (RTM_NEWLINK , p); ret = count; + } }rtnl_unlock (); }
Signature · 1 line
2.1.0
PATCH v2 6/6 bridge: a netlink notification should be sent when those attributes are changed by ioctl
Now when we change the attributes of bridge or br_port by netlink, a relevant netlink notification will be sent, but if we change them by ioctl or sysfs, no notification will be sent.
We should ensure that whenever those attributes change internally or from sysfs/ioctl, that a netlink notification is sent out to listeners.
Also, NetworkManager will use this in the future to listen for out-of-band bridge master attribute updates and incorporate them into the runtime configuration.
This patch is used for ioctl.
--- net/bridge/br_ioctl.c | 40 ++++++++++++++++++++++++---------------- 1 file changed, 24 insertions(+), 16 deletions(-)
net/bridge/br_ioctl.c +24 -16
@@ -112,7 +112,9 @@ static int add_del_if(struct net_bridge *br, int ifindex, int isadd)static int old_dev_ioctl (struct net_device *dev,struct ifreq *rq,int cmd) {struct net_bridge *br =netdev_priv (dev); +struct net_bridge_port *p =NULL ;unsigned long args[4 ]; +int ret = -EOPNOTSUPP ;if (copy_from_user (args, rq->ifr_data,sizeof (args)))return -EFAULT ;
@@ -182,25 +184,29 @@ static int old_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)if (!ns_capable (dev_net (dev)->user_ns,CAP_NET_ADMIN ))return -EPERM ; -return br_set_forward_delay (br, args[1 ]); + ret =br_set_forward_delay (br, args[1 ]); +break ;case BRCTL_SET_BRIDGE_HELLO_TIME :if (!ns_capable (dev_net (dev)->user_ns,CAP_NET_ADMIN ))return -EPERM ; -return br_set_hello_time (br, args[1 ]); + ret =br_set_hello_time (br, args[1 ]); +break ;case BRCTL_SET_BRIDGE_MAX_AGE :if (!ns_capable (dev_net (dev)->user_ns,CAP_NET_ADMIN ))return -EPERM ; -return br_set_max_age (br, args[1 ]); + ret =br_set_max_age (br, args[1 ]); +break ;case BRCTL_SET_AGEING_TIME :if (!ns_capable (dev_net (dev)->user_ns,CAP_NET_ADMIN ))return -EPERM ; -return br_set_ageing_time (br, args[1 ]); + ret =br_set_ageing_time (br, args[1 ]); +break ;case BRCTL_GET_PORT_INFO : {
@@ -240,20 +246,19 @@ static int old_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)return -EPERM ;br_stp_set_enabled (br, args[1 ]); -return 0 ; + ret =0 ; +break ;case BRCTL_SET_BRIDGE_PRIORITY :if (!ns_capable (dev_net (dev)->user_ns,CAP_NET_ADMIN ))return -EPERM ;br_stp_set_bridge_priority (br, args[1 ]); -return 0 ; + ret =0 ; +break ;case BRCTL_SET_PORT_PRIORITY : { -struct net_bridge_port *p; -int ret; -if (!ns_capable (dev_net (dev)->user_ns,CAP_NET_ADMIN ))return -EPERM ;
@@ -263,14 +268,11 @@ static int old_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)else ret =br_stp_set_port_priority (p, args[2 ]);spin_unlock_bh (&br->lock); -return ret; +break ; }case BRCTL_SET_PATH_COST : { -struct net_bridge_port *p; -int ret; -if (!ns_capable (dev_net (dev)->user_ns,CAP_NET_ADMIN ))return -EPERM ;
@@ -280,8 +282,7 @@ static int old_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)else ret =br_stp_set_path_cost (p, args[2 ]);spin_unlock_bh (&br->lock); - -return ret; +break ; }case BRCTL_GET_FDB_ENTRIES :
@@ -289,7 +290,14 @@ static int old_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) args[2], args[3]); } -return -EOPNOTSUPP ; +if (!ret) { +if (p) +br_ifinfo_notify (RTM_NEWLINK , p); +else +netdev_state_change (br->dev); + } + +return ret; }static int old_deviceless (struct net *net,void __user *uarg)
Signature · 1 line
2.1.0
Re: [PATCHv2 net-next 3/6] bridge: simplify the stp_state_store by calling store_bridge_parm
In reply to Xin LongQuoted 13 lines · Xin Long
There are some repetitive codes in
stp_state_store, we can remove them by callingstore_bridge_parm.Signed-off-by Xin Long <[email protected]>--- net/bridge/br_sysfs_br.c | 24 +++++++----------------- 1 file changed, 7 insertions(+), 17 deletions(-)net/bridge/br_sysfs_br.c +0
-0
net/bridge/br_sysfs_br.c static ssize_t stp_state_show(struct device *d, · line 132
Quoted 5 lines
net/bridge/br_sysfs_br.c +2
-0@@ -128,27 +128,17 @@ static ssize_t stp_state_show(struct device *d, } +static int set_stp_state (struct net_bridge *br,unsigned long val) +{
You forgot to add rtnl lock here?
The missing lock is restored in patch 4, but at this point bisect could break..
net/bridge/br_sysfs_br.c static ssize_t stp_state_show(struct device *d, · line 135
Quoted 3 lines
net/bridge/br_sysfs_br.c +3
-0+br_stp_set_enabled (br, val); +return 0 ; +}
Toshiaki Makita
David Miller
maintainerRe: [PATCHv2 net-next 3/6] bridge: simplify the stp_state_store by calling store_bridge_parm
From: Toshiaki Makita <[email protected]>
Date: Tue, 5 Apr 2016 14:08:13 +0900
Quoted 17 lines · Xin Long
Quoted 16 lines
There are some repetitive codes in
stp_state_store, we can remove them by callingstore_bridge_parm.Signed-off-by Xin Long <[email protected]>--- net/bridge/br_sysfs_br.c | 24 +++++++----------------- 1 file changed, 7 insertions(+), 17 deletions(-)net/bridge/br_sysfs_br.c +0
-0@@ -128,27 +128,17 @@ static ssize_t stp_state_show(struct device *d, }
Quoted 6 lines
net/bridge/br_sysfs_br.c static ssize_t stp_state_show(struct device *d, · line 132
Quoted 2 lines
net/bridge/br_sysfs_br.c +2
-0+static int set_stp_state (struct net_bridge *br,unsigned long val) +{You forgot to add rtnl lock here?
The missing lock is restored in patch 4, but at this point bisect could break..
Agreed, this has to be fixed.
Re: [PATCHv2 net-next 3/6] bridge: simplify the stp_state_store by calling store_bridge_parm
Quoted 26 lines · David Miller
From: Toshiaki Makita <[email protected]>
Date: Tue, 5 Apr 2016 14:08:13 +0900Quoted 23 lines · Xin Long
Quoted 13 lines
There are some repetitive codes in
stp_state_store, we can remove them by callingstore_bridge_parm.Signed-off-by Xin Long <[email protected]>--- net/bridge/br_sysfs_br.c | 24 +++++++----------------- 1 file changed, 7 insertions(+), 17 deletions(-)net/bridge/br_sysfs_br.c +0
-0net/bridge/br_sysfs_br.c static ssize_t stp_state_show(struct device *d, · line 132
Quoted 5 lines
net/bridge/br_sysfs_br.c +2
-0@@ -128,27 +128,17 @@ static ssize_t stp_state_show(struct device *d, } +static int set_stp_state (struct net_bridge *br,unsigned long val) +{You forgot to add rtnl lock here?
The missing lock is restored in patch 4, but at this point bisect could break..
OK, if I will fix this, if there's no other issues on this patchset, I will post v3 later.
Thanks.
Quoted 2 lines
Agreed, this has to be fixed.