Skip to contentSkip to conversation

add support for DWC UFS Controller

PATCH New Joao Pinto 1 participant 10 messages May 11, 2016

Subsystems (3)
lore
Share & tools
lore

Joao Pinto

author
#0 lore raw

v16 cover add support for DWC UFS Controller

As requested, I am sending v15 to be included in the SCSI patchwork. The patches were produced on top of the latest (2016-05-02) 4.7/scsi-queue branch. The patches were also validated by checkpatch.pl.

The work consisted of:
- Fixed typo in ufshcd-pltfrm.c
- Tweak ufshcd.c for UFS 2.0 support
- Implement ufshcd-dwc which contains all DWC HW specific code
- Unipro attributes were added and new registers were added to the driver
- Implement a tc-dwc-g210 containing G210 MPHY specific code
- Implement a tc-dwc-g210 glue platform driver
- Implement a tc-dwc-g210 glue pci driver
- Documentation update

Joao Pinto (9):
ufs: fixed typo in ufshcd-pltfrm
ufs: add UFS 2.0 to ufshcd-pltfrm bindings
ufs: add UFS 2.0 capabilities
ufs: add unipro attributes
ufs: add link status to ufshci
ufs: add support for DesignWare Controller
ufs: add support for Synopsys G210 Test Chip
ufs: add TC G210 platform driver
ufs: add TC G210 pci driver

 .../devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt |  26 ++
 .../devicetree/bindings/ufs/ufshcd-pltfrm.txt      |   4 +-
 MAINTAINERS                                        |   6 +
 drivers/scsi/ufs/Kconfig                           |  16 ++
 drivers/scsi/ufs/Makefile                          |   2 +
 drivers/scsi/ufs/tc-dwc-g210-pci.c                 | 181 ++++++++++++
 drivers/scsi/ufs/tc-dwc-g210-pltfrm.c              | 113 ++++++++
 drivers/scsi/ufs/tc-dwc-g210.c                     | 315 +++++++++++++++++++++
 drivers/scsi/ufs/tc-dwc-g210.h                     |  19 ++
 drivers/scsi/ufs/ufshcd-dwc.c                      | 150 ++++++++++
 drivers/scsi/ufs/ufshcd-dwc.h                      |  26 ++
 drivers/scsi/ufs/ufshcd-pltfrm.c                   |   2 +-
 drivers/scsi/ufs/ufshcd.c                          |  89 +++---
 drivers/scsi/ufs/ufshcd.h                          |   7 +
 drivers/scsi/ufs/ufshci-dwc.h                      |  36 +++
 drivers/scsi/ufs/ufshci.h                          |  11 +
 drivers/scsi/ufs/unipro.h                          |  39 +++
 17 files changed, 998 insertions(+), 44 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210-pci.c
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210.c
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210.h
 create mode 100644 drivers/scsi/ufs/ufshcd-dwc.c
 create mode 100644 drivers/scsi/ufs/ufshcd-dwc.h
 create mode 100644 drivers/scsi/ufs/ufshci-dwc.h
Signature · 1 line
1.8.1.5
author
#1 lore raw

PATCH v16 1/9 ufs: fixed typo in ufshcd-pltfrm

Fixed typo in ufshcd-pltfrm.

---
Changes v0->v16:
- Nothing changed (just to keep up with patch set version).

 drivers/scsi/ufs/ufshcd-pltfrm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/ufs/ufshcd-pltfrm.c +1 -1
index 718f12e..db53f38 100644
@@ -372,6 +372,6 @@ EXPORT_SYMBOL_GPL(ufshcd_pltfrm_init);
 
 MODULE_AUTHOR("Santosh Yaragnavi <[email protected]>");
 MODULE_AUTHOR("Vinayak Holikatti <[email protected]>");
-MODULE_DESCRIPTION("UFS host controller Pltform bus based glue driver");
+MODULE_DESCRIPTION("UFS host controller Platform bus based glue driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(UFSHCD_DRIVER_VERSION);
Signature · 1 line
1.8.1.5
author
#2 lore raw

PATCH v16 2/9 ufs: add UFS 2.0 to ufshcd-pltfrm bindings

In reply to Joao Pinto

Add UFS 2.0 to the ufshcd-pltfrm devicetree binding.

---
Changes v12->v16:
- Nothing changed (just to keep up with patch set version). Changes v0->v12 (Tomas Winkler):
- This patch only appeared in v12

 Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt +2 -2
index 66f6adf..a99ed55 100644
@@ -4,8 +4,8 @@ UFSHC nodes are defined to describe on-chip UFS host controllers.
 Each UFS controller instance should have its own node.
 
 Required properties:
-- compatible		: must contain "jedec,ufs-1.1", may also list one or more
-					  of the following:
+- compatible		: must contain "jedec,ufs-1.1" or "jedec,ufs-2.0", may
+			  also list one or more of the following:
 					  "qcom,msm8994-ufshc"
 					  "qcom,msm8996-ufshc"
 					  "qcom,ufshc"
Signature · 1 line
1.8.1.5
author
#3 lore raw

PATCH v16 3/9 ufs: add UFS 2.0 capabilities

In reply to Joao Pinto

Add UFS 2.0 support to the UFS core driver.

---
Changes v12->v16:
- Nothing changed (just to keep up with patch set version). Changes v11->v12 (Tomas Winkler):
- devicetree binding tweak was moved to a separated patch
- unipro tweaks were moved to a separated patch
- ufshcd_compose_upiu was decomposed in 2 functions
- UTP_CMD_TYPE_UFS_STORAGE is now 0x1 (previously was 0x11) Changes v8->v11:
- Nothing changed (just to keep up with patch set version). Changes v7->v8:
- Added "jedec, ufs-2.0" to the ufschd-platform compatibility strings Changes v0->v7:
- Nothing changed (just to keep up with patch set version).

 drivers/scsi/ufs/ufshcd.c | 89 +++++++++++++++++++++++++----------------------
 drivers/scsi/ufs/ufshci.h |  5 +++
 2 files changed, 53 insertions(+), 41 deletions(-)
drivers/scsi/ufs/ufshcd.c +48 -41
index f8fa72c..8e8989a 100644
@@ -1173,7 +1173,7 @@ static void ufshcd_disable_intr(struct ufs_hba *hba, u32 intrs)
  * @cmd_dir: requests data direction
  */
 static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp,
-		u32 *upiu_flags, enum dma_data_direction cmd_dir)
+			u32 *upiu_flags, enum dma_data_direction cmd_dir)
 {
 	struct utp_transfer_req_desc *req_desc = lrbp->utr_descriptor_ptr;
 	u32 data_direction;
@@ -1299,47 +1299,55 @@ static inline void ufshcd_prepare_utp_nop_upiu(struct ufshcd_lrb *lrbp)
 }
 
 /**
- * ufshcd_compose_upiu - form UFS Protocol Information Unit(UPIU)
+ * ufshcd_comp_devman_upiu - UFS Protocol Information Unit(UPIU)
+ *			     for Device Management Purposes
  * @hba - per adapter instance
  * @lrb - pointer to local reference block
  */
-static int ufshcd_compose_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
+static int ufshcd_comp_devman_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
 {
 	u32 upiu_flags;
 	int ret = 0;
 
-	switch (lrbp->command_type) {
-	case UTP_CMD_TYPE_SCSI:
-		if (likely(lrbp->cmd)) {
-			ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags,
-					lrbp->cmd->sc_data_direction);
-			ufshcd_prepare_utp_scsi_cmd_upiu(lrbp, upiu_flags);
-		} else {
-			ret = -EINVAL;
-		}
-		break;
-	case UTP_CMD_TYPE_DEV_MANAGE:
-		ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE);
-		if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY)
-			ufshcd_prepare_utp_query_req_upiu(
-					hba, lrbp, upiu_flags);
-		else if (hba->dev_cmd.type == DEV_CMD_TYPE_NOP)
-			ufshcd_prepare_utp_nop_upiu(lrbp);
-		else
-			ret = -EINVAL;
-		break;
-	case UTP_CMD_TYPE_UFS:
-		/* For UFS native command implementation */
-		ret = -ENOTSUPP;
-		dev_err(hba->dev, "%s: UFS native command are not supported\n",
-			__func__);
-		break;
-	default:
-		ret = -ENOTSUPP;
-		dev_err(hba->dev, "%s: unknown command type: 0x%x\n",
-				__func__, lrbp->command_type);
-		break;
-	} /* end of switch */
+	if (hba->ufs_version == UFSHCI_VERSION_20)
+		lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
+	else
+		lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE;
+
+	ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE);
+	if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY)
+		ufshcd_prepare_utp_query_req_upiu(hba, lrbp, upiu_flags);
+	else if (hba->dev_cmd.type == DEV_CMD_TYPE_NOP)
+		ufshcd_prepare_utp_nop_upiu(lrbp);
+	else
+		ret = -EINVAL;
+
+	return ret;
+}
+
+/**
+ * ufshcd_comp_scsi_upiu - UFS Protocol Information Unit(UPIU)
+ *			   for SCSI Purposes
+ * @hba - per adapter instance
+ * @lrb - pointer to local reference block
+ */
+static int ufshcd_comp_scsi_upiu(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
+{
+	u32 upiu_flags;
+	int ret = 0;
+
+	if (hba->ufs_version == UFSHCI_VERSION_20)
+		lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
+	else
+		lrbp->command_type = UTP_CMD_TYPE_SCSI;
+
+	if (likely(lrbp->cmd)) {
+		ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags,
+						lrbp->cmd->sc_data_direction);
+		ufshcd_prepare_utp_scsi_cmd_upiu(lrbp, upiu_flags);
+	} else {
+		ret = -EINVAL;
+	}
 
 	return ret;
 }
@@ -1451,10 +1459,9 @@ static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 	lrbp->task_tag = tag;
 	lrbp->lun = ufshcd_scsi_to_upiu_lun(cmd->device->lun);
 	lrbp->intr_cmd = !ufshcd_is_intr_aggr_allowed(hba) ? true : false;
-	lrbp->command_type = UTP_CMD_TYPE_SCSI;
 
-	/* form UPIU before issuing the command */
-	ufshcd_compose_upiu(hba, lrbp);
+	ufshcd_comp_scsi_upiu(hba, lrbp);
+
 	err = ufshcd_map_sg(lrbp);
 	if (err) {
 		lrbp->cmd = NULL;
@@ -1479,11 +1486,10 @@ static int ufshcd_compose_dev_cmd(struct ufs_hba *hba,
 	lrbp->sense_buffer = NULL;
 	lrbp->task_tag = tag;
 	lrbp->lun = 0; /* device management cmd is not specific to any LUN */
-	lrbp->command_type = UTP_CMD_TYPE_DEV_MANAGE;
 	lrbp->intr_cmd = true; /* No interrupt aggregation */
 	hba->dev_cmd.type = cmd_type;
 
-	return ufshcd_compose_upiu(hba, lrbp);
+	return ufshcd_comp_devman_upiu(hba, lrbp);
 }
 
 static int
@@ -3539,7 +3545,8 @@ static void __ufshcd_transfer_req_compl(struct ufs_hba *hba,
 			/* Do not touch lrbp after scsi done */
 			cmd->scsi_done(cmd);
 			__ufshcd_release(hba);
-		} else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE) {
+		} else if (lrbp->command_type == UTP_CMD_TYPE_DEV_MANAGE ||
+			lrbp->command_type == UTP_CMD_TYPE_UFS_STORAGE) {
 			if (hba->dev_cmd.complete)
 				complete(hba->dev_cmd.complete);
 		}
drivers/scsi/ufs/ufshci.h +5 -0
index 4cb1cc6..36f5879 100644
@@ -279,6 +279,11 @@ enum {
 	UTP_CMD_TYPE_DEV_MANAGE		= 0x2,
 };
 
+/* To accommodate UFS2.0 required Command type */
+enum {
+	UTP_CMD_TYPE_UFS_STORAGE	= 0x1,
+};
+
 enum {
 	UTP_SCSI_COMMAND		= 0x00000000,
 	UTP_NATIVE_UFS_COMMAND		= 0x10000000,
Signature · 1 line
1.8.1.5
author
#4 lore raw

PATCH v16 4/9 ufs: add unipro attributes

In reply to Joao Pinto

Add unipro attributes.

---
Changes v12->v16:
- Nothing changed (just to keep up with patch set version). Changes v0->v12 (Tomas Winkler):
- This patch only appeared in v12

 drivers/scsi/ufs/unipro.h | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
drivers/scsi/ufs/unipro.h +39 -0
index e2854e4..eff8b56 100644
@@ -36,6 +36,10 @@
 #define TX_LCC_SEQUENCER			0x0032
 #define TX_MIN_ACTIVATETIME			0x0033
 #define TX_PWM_G6_G7_SYNC_LENGTH		0x0034
+#define TX_REFCLKFREQ				0x00EB
+#define TX_CFGCLKFREQVAL			0x00EC
+#define	CFGEXTRATTR				0x00F0
+#define DITHERCTRL2				0x00F1
 
 /*
  * M-RX Configuration Attributes
@@ -51,10 +55,40 @@
 #define RX_TERMINATION_FORCE_ENABLE		0x0089
 #define RX_MIN_ACTIVATETIME_CAPABILITY		0x008F
 #define RX_HIBERN8TIME_CAPABILITY		0x0092
+#define RX_REFCLKFREQ				0x00EB
+#define	RX_CFGCLKFREQVAL			0x00EC
+#define CFGWIDEINLN				0x00F0
+#define CFGRXCDR8				0x00BA
+#define ENARXDIRECTCFG4				0x00F2
+#define CFGRXOVR8				0x00BD
+#define RXDIRECTCTRL2				0x00C7
+#define ENARXDIRECTCFG3				0x00F3
+#define RXCALCTRL				0x00B4
+#define ENARXDIRECTCFG2				0x00F4
+#define CFGRXOVR4				0x00E9
+#define RXSQCTRL				0x00B5
+#define CFGRXOVR6				0x00BF
 
 #define is_mphy_tx_attr(attr)			(attr < RX_MODE)
 #define RX_MIN_ACTIVATETIME_UNIT_US		100
 #define HIBERN8TIME_UNIT_US			100
+
+/*
+ * Common Block Attributes
+ */
+#define TX_GLOBALHIBERNATE			UNIPRO_CB_OFFSET(0x002B)
+#define REFCLKMODE				UNIPRO_CB_OFFSET(0x00BF)
+#define DIRECTCTRL19				UNIPRO_CB_OFFSET(0x00CD)
+#define DIRECTCTRL10				UNIPRO_CB_OFFSET(0x00E6)
+#define CDIRECTCTRL6				UNIPRO_CB_OFFSET(0x00EA)
+#define RTOBSERVESELECT				UNIPRO_CB_OFFSET(0x00F0)
+#define CBDIVFACTOR				UNIPRO_CB_OFFSET(0x00F1)
+#define CBDCOCTRL5				UNIPRO_CB_OFFSET(0x00F3)
+#define CBPRGPLL2				UNIPRO_CB_OFFSET(0x00F8)
+#define CBPRGTUNING				UNIPRO_CB_OFFSET(0x00FB)
+
+#define UNIPRO_CB_OFFSET(x)			(0x8000 | x)
+
 /*
  * PHY Adpater attributes
  */
@@ -119,6 +153,11 @@
 #define PA_TACTIVATE_TIME_UNIT_US	10
 #define PA_HIBERN8_TIME_UNIT_US		100
 
+/*Other attributes*/
+#define VS_MPHYCFGUPDT		0xD085
+#define VS_DEBUGOMC		0xD09E
+#define VS_POWERSTATE		0xD083
+
 /* PHY Adapter Protocol Constants */
 #define PA_MAXDATALANES	4
 
Signature · 1 line
1.8.1.5
author
#5 lore raw

PATCH v16 5/9 ufs: add link status to ufshci

In reply to Joao Pinto

Add link status to ufshci.

---
Changes v12->v16:
- Nothing changed (just to keep up with patch set version). Changes v0->v12 (Tomas Winkler):
- This patch only appeared in v12

 drivers/scsi/ufs/ufshci.h | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/scsi/ufs/ufshci.h +6 -0
index 36f5879..9599741 100644
@@ -220,6 +220,12 @@ enum {
 #define UIC_ARG_ATTR_TYPE(t)		(((t) & 0xFF) << 16)
 #define UIC_GET_ATTR_ID(v)		(((v) >> 16) & 0xFFFF)
 
+/* Link Status*/
+enum link_status {
+	UFSHCD_LINK_IS_DOWN	= 1,
+	UFSHCD_LINK_IS_UP	= 2,
+};
+
 /* UIC Commands */
 enum uic_cmd_dme {
 	UIC_CMD_DME_GET			= 0x01,
Signature · 1 line
1.8.1.5
author
#6 lore raw

PATCH v16 6/9 ufs: add support for DesignWare Controller

In reply to Joao Pinto

This patch has the goal to add support for DesignWare UFS Controller specific operations.

---
Changes v15->v16 (Martin K. Petersen):
- DWC core does not longer have a Kconfig item (also affected Makefile) Kconfig options reduction was the justification for this change.
Changes v12->v15:
- Nothing changed (just to keep up with patch set version). Changes v11->v12 (Tomas Winkler):
- custom_phy_initialization is now phy_initialization
- ufshcd_is_intr_aggr_allowed() has now a DWC tweak
- link status was now moved to a separated patch
Changes v10->v11:
- Nothing changed (just to keep up with patch set version). Changes v9->v10 (Arnd Bergmann):
- Patch now only has DWC controller specific code
- Added custom_phy_initialization callback for PHY specific code Changes v8->v9 (Robert Herring):
- drop 0x in the node declaration
- most specific compatibility string declared first
Changes v7->v8 (Akinobu Mita):
- DME sets were simplified for easier reading
- CLK DIV default values definitions names were changed to match the register's name
- New line added to dev_err and dev_info statements
Changes v6->v7 (Arnd Bergmann):
- Changed DT node name (to ufs only) and the memory address (to 0xd000000)
- Removed CONFIG_PM from the PCI glue driver (pm.h already does this)
- No other changes are necessary in ufshcd.c because of the link up notify function usage (it is simpler now)
- Removed the PHY mentioning since the Test Chip is not a real PHY for real world usage, since it is a test chip for prototyping with a very specific usage
- Added again the Test Chip 20-bit option
Changes v5->v6:
- Patch bad format fixed
Changes v4->v5 (Akinobu Mita):
- All functions used only locally in ufshcd-dwc are now declared as static
- ufshcd_dwc_configuration() was removed in ufshcd-dwc and a notify function (ufshcd_dwc_link_startup_notify) was created to deal with the DWC specific init routines
- 20-bit RMMI option was removed from Kconfig. Now if MPHY TC is selected and 40-bit is not then it assumes a 20-bit config
Changes v3->v4 (Arnd Bergmann and Mark Rutland):
- SCSI_UFS_DWC_HOOKS is now silent and selected by the SCSI_UFS_DWC_PLAT or SCSI_UFS_DWC_PCI
- Compatibility string has the ufs core version for info purposes since the driver is capable of getting the controller version from its registers
- Created ufs-dwc-pci glue driver with specific DWC data
- MPHY configuration remains in the ufshcd-dwc since it is unipro attribute writting only not following the a linux phy framework logic
Changes v2->v3 (Julian Calaby):
- Implement a common DWC code to be used by the platform and pci glue drivers
- Synopsys ID & Class added to the existing pci driver and specific DWC was also added to the pci driver
Changes v1->v2 (Akinobu Mita):
- Implement a platform driver that uses the existing UFS core driver
- Add DWC specific code to the existing UFS core driver

 MAINTAINERS                   |   6 ++
 drivers/scsi/ufs/ufshcd-dwc.c | 150 ++++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/ufs/ufshcd-dwc.h |  26 ++++++++
 drivers/scsi/ufs/ufshcd.h     |   7 ++
 drivers/scsi/ufs/ufshci-dwc.h |  36 ++++++++++
 5 files changed, 225 insertions(+)
 create mode 100644 drivers/scsi/ufs/ufshcd-dwc.c
 create mode 100644 drivers/scsi/ufs/ufshcd-dwc.h
 create mode 100644 drivers/scsi/ufs/ufshci-dwc.h
MAINTAINERS +6 -0
index a87defa..08d05a3 100644
@@ -11451,6 +11451,12 @@ S:	Supported
 F:	Documentation/scsi/ufs.txt
 F:	drivers/scsi/ufs/
 
+UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER DWC HOOKS
+M:	Joao Pinto <[email protected]>
+L:	[email protected]
+S:	Supported
+F:	drivers/scsi/ufs/*dwc*
+
 UNSORTED BLOCK IMAGES (UBI)
 M:	Artem Bityutskiy <[email protected]>
 M:	Richard Weinberger <[email protected]>
drivers/scsi/ufs/ufshcd-dwc.c new file +150 -0

150 lines not on this page · raw message

drivers/scsi/ufs/ufshcd-dwc.h new file +26 -0
new file mode 100644
index 0000000..c8be295
@@ -0,0 +1,26 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UFSHCD_DWC_H
+#define _UFSHCD_DWC_H
+
+struct ufshcd_dme_attr_val {
+	u32 attr_sel;
+	u32 mib_val;
+	u8 peer;
+};
+
+int ufshcd_dwc_link_startup_notify(struct ufs_hba *hba,
+					enum ufs_notify_change_status status);
+int ufshcd_dwc_dme_set_attrs(struct ufs_hba *hba,
+				const struct ufshcd_dme_attr_val *v, int n);
+#endif /* End of Header */
drivers/scsi/ufs/ufshcd.h +7 -0
index 4bb6566..430bef1 100644
@@ -264,6 +264,7 @@ struct ufs_pwr_mode_info {
  * @suspend: called during host controller PM callback
  * @resume: called during host controller PM callback
  * @dbg_register_dump: used to dump controller debug information
+ * @phy_initialization: used to initialize phys
  */
 struct ufs_hba_variant_ops {
 	const char *name;
@@ -285,6 +286,7 @@ struct ufs_hba_variant_ops {
 	int     (*suspend)(struct ufs_hba *, enum ufs_pm_op);
 	int     (*resume)(struct ufs_hba *, enum ufs_pm_op);
 	void	(*dbg_register_dump)(struct ufs_hba *hba);
+	int	(*phy_initialization)(struct ufs_hba *);
 };
 
 /* clock gating state  */
@@ -567,11 +569,16 @@ static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba)
 
 static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba)
 {
+/* DWC UFS Core has the Interrupt aggregation feature but is not detectable*/
+#ifndef CONFIG_SCSI_UFS_DWC
 	if ((hba->caps & UFSHCD_CAP_INTR_AGGR) &&
 	    !(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR))
 		return true;
 	else
 		return false;
+#else
+return true;
+#endif
 }
 
 #define ufshcd_writel(hba, val, reg)	\
drivers/scsi/ufs/ufshci-dwc.h new file +36 -0
new file mode 100644
index 0000000..ca341fe
@@ -0,0 +1,36 @@
+/*
+ * UFS Host driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _UFSHCI_DWC_H
+#define _UFSHCI_DWC_H
+
+/* DWC HC UFSHCI specific Registers */
+enum dwc_specific_registers {
+	DWC_UFS_REG_HCLKDIV	= 0xFC,
+};
+
+/* Clock Divider Values: Hex equivalent of frequency in MHz */
+enum clk_div_values {
+	DWC_UFS_REG_HCLKDIV_DIV_62_5	= 0x3e,
+	DWC_UFS_REG_HCLKDIV_DIV_125	= 0x7d,
+	DWC_UFS_REG_HCLKDIV_DIV_200	= 0xc8,
+};
+
+/* Selector Index */
+enum selector_index {
+	SELIND_LN0_TX		= 0x00,
+	SELIND_LN1_TX		= 0x01,
+	SELIND_LN0_RX		= 0x04,
+	SELIND_LN1_RX		= 0x05,
+};
+
+#endif /* End of Header */
Signature · 1 line
1.8.1.5
author
#7 lore raw

PATCH v16 7/9 ufs: add support for Synopsys G210 Test Chip

In reply to Joao Pinto

This patch adds support for Synopsys G210 Test Chip.

---
Changes v15->v16 (Martin K. Petersen):
- Test Chip G210 does not longer have a Kconfig item (also affected Makefile) Kconfig options reduction was the justification for this change.
Changes v10->v15:
- Nothing changed (just to keep up with patch set version). Changes v0->v10:
- This patch only appeared in v10

 drivers/scsi/ufs/tc-dwc-g210.c | 315 +++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/ufs/tc-dwc-g210.h |  19 +++
 2 files changed, 334 insertions(+)
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210.c
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210.h
drivers/scsi/ufs/tc-dwc-g210.c new file +315 -0
new file mode 100644
index 0000000..181f208
@@ -0,0 +1,315 @@
+/*
+ * Synopsys G210 Test Chip driver
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "ufshcd.h"
+#include "unipro.h"
+
+#include "ufshcd-dwc.h"
+#include "ufshci-dwc.h"
+
+/**
+ * tc_dwc_g210_setup_40bit_rmmi()
+ * This function configures Synopsys TC specific atributes (40-bit RMMI)
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success or non-zero value on failure
+ */
+static int tc_dwc_g210_setup_40bit_rmmi(struct ufs_hba *hba)
+{
+	const struct ufshcd_dme_attr_val setup_attrs[] = {
+		{ UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
+		{ UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
+		{ UIC_ARG_MIB(CDIRECTCTRL6), 0x80, DME_LOCAL },
+		{ UIC_ARG_MIB(CBDIVFACTOR), 0x08, DME_LOCAL },
+		{ UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
+		{ UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
+		{ UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN0_TX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN0_TX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN0_TX), 0x14,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN0_RX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN0_RX), 4,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80,
+								DME_LOCAL },
+		{ UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
+		{ UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN0_RX), 0x03,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN0_RX), 0x16,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN0_RX), 0x42,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN0_RX), 0xa4,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN0_RX), 0x28,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN0_RX), 0x1E,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f,
+								DME_LOCAL },
+		{ UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
+	};
+
+	return ufshcd_dwc_dme_set_attrs(hba, setup_attrs,
+						ARRAY_SIZE(setup_attrs));
+}
+
+/**
+ * tc_dwc_g210_setup_20bit_rmmi_lane0()
+ * This function configures Synopsys TC 20-bit RMMI Lane 0
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success or non-zero value on failure
+ */
+static int tc_dwc_g210_setup_20bit_rmmi_lane0(struct ufs_hba *hba)
+{
+	const struct ufshcd_dme_attr_val setup_attrs[] = {
+		{ UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN0_TX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN0_TX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN0_RX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN0_TX), 0x12,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN0_RX), 2,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN0_RX), 0x80,
+								DME_LOCAL },
+		{ UIC_ARG_MIB(DIRECTCTRL10), 0x04, DME_LOCAL },
+		{ UIC_ARG_MIB(DIRECTCTRL19), 0x02, DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN0_RX), 0x03,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN0_RX), 0x16,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN0_RX), 0x42,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN0_RX), 0xa4,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN0_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN0_RX), 0x28,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN0_RX), 0x1E,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN0_RX), 0x2f,
+								DME_LOCAL },
+		{ UIC_ARG_MIB(CBPRGPLL2), 0x00, DME_LOCAL },
+	};
+
+	return ufshcd_dwc_dme_set_attrs(hba, setup_attrs,
+						ARRAY_SIZE(setup_attrs));
+}
+
+/**
+ * tc_dwc_g210_setup_20bit_rmmi_lane1()
+ * This function configures Synopsys TC 20-bit RMMI Lane 1
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success or non-zero value on failure
+ */
+static int tc_dwc_g210_setup_20bit_rmmi_lane1(struct ufs_hba *hba)
+{
+	int connected_rx_lanes = 0;
+	int connected_tx_lanes = 0;
+	int ret = 0;
+
+	const struct ufshcd_dme_attr_val setup_tx_attrs[] = {
+		{ UIC_ARG_MIB_SEL(TX_REFCLKFREQ, SELIND_LN1_TX), 0x0d,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(TX_CFGCLKFREQVAL, SELIND_LN1_TX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGEXTRATTR, SELIND_LN1_TX), 0x12,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(DITHERCTRL2, SELIND_LN0_TX), 0xd6,
+								DME_LOCAL },
+	};
+
+	const struct ufshcd_dme_attr_val setup_rx_attrs[] = {
+		{ UIC_ARG_MIB_SEL(RX_REFCLKFREQ, SELIND_LN1_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RX_CFGCLKFREQVAL, SELIND_LN1_RX), 0x19,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGWIDEINLN, SELIND_LN1_RX), 2,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXCDR8, SELIND_LN1_RX), 0x80,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG4, SELIND_LN1_RX), 0x03,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR8, SELIND_LN1_RX), 0x16,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXDIRECTCTRL2, SELIND_LN1_RX), 0x42,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG3, SELIND_LN1_RX), 0xa4,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXCALCTRL, SELIND_LN1_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(ENARXDIRECTCFG2, SELIND_LN1_RX), 0x01,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR4, SELIND_LN1_RX), 0x28,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(RXSQCTRL, SELIND_LN1_RX), 0x1E,
+								DME_LOCAL },
+		{ UIC_ARG_MIB_SEL(CFGRXOVR6, SELIND_LN1_RX), 0x2f,
+								DME_LOCAL },
+	};
+
+	/* Get the available lane count */
+	ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES),
+			&connected_rx_lanes);
+	ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES),
+			&connected_tx_lanes);
+
+	if (connected_tx_lanes == 2) {
+
+		ret = ufshcd_dwc_dme_set_attrs(hba, setup_tx_attrs,
+						ARRAY_SIZE(setup_tx_attrs));
+
+		if (ret)
+			goto out;
+	}
+
+	if (connected_rx_lanes == 2) {
+		ret = ufshcd_dwc_dme_set_attrs(hba, setup_rx_attrs,
+						ARRAY_SIZE(setup_rx_attrs));
+	}
+
+out:
+	return ret;
+}
+
+/**
+ * tc_dwc_g210_setup_20bit_rmmi()
+ * This function configures Synopsys TC specific atributes (20-bit RMMI)
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success or non-zero value on failure
+ */
+static int tc_dwc_g210_setup_20bit_rmmi(struct ufs_hba *hba)
+{
+	int ret = 0;
+
+	const struct ufshcd_dme_attr_val setup_attrs[] = {
+		{ UIC_ARG_MIB(TX_GLOBALHIBERNATE), 0x00, DME_LOCAL },
+		{ UIC_ARG_MIB(REFCLKMODE), 0x01, DME_LOCAL },
+		{ UIC_ARG_MIB(CDIRECTCTRL6), 0xc0, DME_LOCAL },
+		{ UIC_ARG_MIB(CBDIVFACTOR), 0x44, DME_LOCAL },
+		{ UIC_ARG_MIB(CBDCOCTRL5), 0x64, DME_LOCAL },
+		{ UIC_ARG_MIB(CBPRGTUNING), 0x09, DME_LOCAL },
+		{ UIC_ARG_MIB(RTOBSERVESELECT), 0x00, DME_LOCAL },
+	};
+
+	ret = ufshcd_dwc_dme_set_attrs(hba, setup_attrs,
+						ARRAY_SIZE(setup_attrs));
+	if (ret)
+		goto out;
+
+	/* Lane 0 configuration*/
+	ret = tc_dwc_g210_setup_20bit_rmmi_lane0(hba);
+	if (ret)
+		goto out;
+
+	/* Lane 1 configuration*/
+	ret = tc_dwc_g210_setup_20bit_rmmi_lane1(hba);
+	if (ret)
+		goto out;
+
+out:
+	return ret;
+}
+
+/**
+ * tc_dwc_g210_config_40_bit()
+ * This function configures Local (host) Synopsys 40-bit TC specific attributes
+ *
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success non-zero value on failure
+ */
+int tc_dwc_g210_config_40_bit(struct ufs_hba *hba)
+{
+	int ret = 0;
+
+	dev_info(hba->dev, "Configuring Test Chip 40-bit RMMI\n");
+	ret = tc_dwc_g210_setup_40bit_rmmi(hba);
+	if (ret) {
+		dev_err(hba->dev, "Configuration failed\n");
+		goto out;
+	}
+
+	/* To write Shadow register bank to effective configuration block */
+	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_MPHYCFGUPDT), 0x01);
+	if (ret)
+		goto out;
+
+	/* To configure Debug OMC */
+	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_DEBUGOMC), 0x01);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(tc_dwc_g210_config_40_bit);
+
+/**
+ * tc_dwc_g210_config_20_bit()
+ * This function configures Local (host) Synopsys 20-bit TC specific attributes
+ *
+ * @hba: Pointer to drivers structure
+ *
+ * Returns 0 on success non-zero value on failure
+ */
+int tc_dwc_g210_config_20_bit(struct ufs_hba *hba)
+{
+	int ret = 0;
+
+	dev_info(hba->dev, "Configuring Test Chip 20-bit RMMI\n");
+	ret = tc_dwc_g210_setup_20bit_rmmi(hba);
+	if (ret) {
+		dev_err(hba->dev, "Configuration failed\n");
+		goto out;
+	}
+
+	/* To write Shadow register bank to effective configuration block */
+	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_MPHYCFGUPDT), 0x01);
+	if (ret)
+		goto out;
+
+	/* To configure Debug OMC */
+	ret = ufshcd_dme_set(hba, UIC_ARG_MIB(VS_DEBUGOMC), 0x01);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(tc_dwc_g210_config_20_bit);
drivers/scsi/ufs/tc-dwc-g210.h new file +19 -0
new file mode 100644
index 0000000..fb177db
@@ -0,0 +1,19 @@
+/*
+ * Synopsys G210 Test Chip driver
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Joao Pinto <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _TC_DWC_G210_H
+#define _TC_DWC_G210_H
+
+int tc_dwc_g210_config_40_bit(struct ufs_hba *hba);
+int tc_dwc_g210_config_20_bit(struct ufs_hba *hba);
+
+#endif /* End of Header */
Signature · 1 line
1.8.1.5
author
#8 lore raw

PATCH v16 8/9 add TC G210 platform driver

In reply to Joao Pinto

This patch adds a glue platform driver for the Synopsys G210 Test Chip.

---
Changes v15->v16 (Martin K. Petersen):
- The glue driver Makefile entry calls the dwc and tc objects directly. Changes v13->v15:
- Nothing changed (just to keep up with patch set version). Changes v12->v13 (Rob Herring):
- Removed spaces from the compatibility string (pltfm driver and DT bindings)
- Removed underscores from the node descriptor
Changes v11->v12 (Tomas Winkler):
- custom_phy_initialization replaced by phy_initialization Changes v10->v11 (Arnd Bergmann):
- vops structs are now passed in .data
Changes v0->v10:
- This patch only appeared in v10

 .../devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt |  26 +++++
 drivers/scsi/ufs/Kconfig                           |   8 ++
 drivers/scsi/ufs/Makefile                          |   1 +
 drivers/scsi/ufs/tc-dwc-g210-pltfrm.c              | 113 +++++++++++++++++++++
 4 files changed, 148 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt new file +26 -0
new file mode 100644
index 0000000..71c0777
@@ -0,0 +1,26 @@
+* Universal Flash Storage (UFS) DesignWare Host Controller
+
+DWC_UFS nodes are defined to describe on-chip UFS host controllers and MPHY.
+Each UFS controller instance should have its own node.
+
+Required properties:
+- compatible	: compatible list must contain the PHY type & version:
+			"snps,g210-tc-6.00-20bit"
+			"snps,g210-tc-6.00-40bit"
+		  complemented with the Controller IP version:
+			"snps,dwc-ufshcd-1.40a"
+		  complemented with the JEDEC version:
+			"jedec,ufs-1.1"
+			"jedec,ufs-2.0"
+
+- reg		: <registers mapping>
+- interrupts	: <interrupt mapping for UFS host controller IRQ>
+
+Example for a setup using a 1.40a DWC Controller with a 6.00 G210 40-bit TC:
+	dwc-ufs@d0000000 {
+		compatible = "snps,g210-tc-6.00-40bit",
+			     "snps,dwc-ufshcd-1.40a",
+			     "jedec,ufs-2.0";
+		reg = < 0xd0000000 0x10000 >;
+		interrupts = < 24 >;
+	};
drivers/scsi/ufs/Kconfig +8 -0
index 097894a..81fdfb3 100644
@@ -72,6 +72,14 @@ config SCSI_UFSHCD_PLATFORM
 
 	  If unsure, say N.
 
+config SCSI_UFS_DWC_TC_PLATFORM
+	tristate "DesignWare platform support using a G210 Test Chip"
+	depends on SCSI_UFSHCD_PLATFORM
+	---help---
+	  Synopsys Test Chip is a PHY for prototyping purposes.
+
+	  If unsure, say N.
+
 config SCSI_UFS_QCOM
 	tristate "QCOM specific hooks to UFS controller platform driver"
 	depends on SCSI_UFSHCD_PLATFORM && ARCH_QCOM
drivers/scsi/ufs/Makefile +1 -0
index 8303bcc..d5774c6 100644
@@ -1,4 +1,5 @@
 # UFSHCD makefile
+obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-dwc-g210.o
 obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
 obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
drivers/scsi/ufs/tc-dwc-g210-pltfrm.c new file +113 -0

113 lines not on this page · raw message

Signature · 1 line
1.8.1.5
author
#9 lore raw

PATCH v16 9/9 ufs: add TC G210 pci driver

In reply to Joao Pinto

This patch adds a glue pci driver for the Synopsys G210 Test Chip.

---
Changes v15->v16 (Martin K. Petersen):
- The glue driver Makefile entry calls the dwc and tc objects directly. Changes v13->v15:
- Nothing changed (just to keep up with patch set version). Changes v12->v13:
- Nothing changed (just to keep up with patch set version). Changes v10->v12 (Tomas Winkler):
- custom_phy_initialization replaced by phy_initialization Changes v10->v11 (Arnd Bergmann):
- tc_type is now initialized to TC_G210_INV
- probe function checks if the test chip version is specified Changes v0->v10:
- This patch only appeared in v10

 drivers/scsi/ufs/Kconfig           |   8 ++
 drivers/scsi/ufs/Makefile          |   1 +
 drivers/scsi/ufs/tc-dwc-g210-pci.c | 181 +++++++++++++++++++++++++++++++++++++
 3 files changed, 190 insertions(+)
 create mode 100644 drivers/scsi/ufs/tc-dwc-g210-pci.c
drivers/scsi/ufs/Kconfig +8 -0
index 81fdfb3..e27b4d4 100644
@@ -61,6 +61,14 @@ config SCSI_UFSHCD_PCI
 
 	  If unsure, say N.
 
+config SCSI_UFS_DWC_TC_PCI
+	tristate "DesignWare pci support using a G210 Test Chip"
+	depends on SCSI_UFSHCD_PCI
+	---help---
+	  Synopsys Test Chip is a PHY for prototyping purposes.
+
+	  If unsure, say N.
+
 config SCSI_UFSHCD_PLATFORM
 	tristate "Platform bus based UFS Controller support"
 	depends on SCSI_UFSHCD
drivers/scsi/ufs/Makefile +1 -0
index d5774c6..6e77cb0 100644
@@ -1,4 +1,5 @@
 # UFSHCD makefile
+obj-$(CONFIG_SCSI_UFS_DWC_TC_PCI) += tc-dwc-g210-pci.o ufshcd-dwc.o tc-dwc-g210.o
 obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-dwc-g210.o
 obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
drivers/scsi/ufs/tc-dwc-g210-pci.c new file +181 -0

181 lines not on this page · raw message

Signature · 1 line
1.8.1.5