media: soc_camera: ov9640: switch driver to v4l2_async

When I've been recently doing the same for ov772x and other sensor driver I've been suggested to first copy the driver into drivers/media/i2c/ and leave the original soc_camera one there, so they can be bulk removed or moved to staging. I'll let Hans confirm this, as he's about to take care of this process.

BTW from the v1 discussion:

Dne 10.8.2018 v 09:32 jacopo mondi napsal(a):

Quoted 5 lines

When I've been recently doing the same for ov772x and other sensor driver I've been suggested to first copy the driver into drivers/media/i2c/ and leave the original soc_camera one there, so they can be bulk removed or moved to staging. I'll let Hans confirm this, as he's about to take care of this process.

I would rather used git mv for preserve the git history, but if a simple copy is fine then I'm fine too ;-).

Petr

Hi Petr,

Quoted 9 lines · Petr Cvek

BTW from the v1 discussion:

Dne 10.8.2018 v 09:32 jacopo mondi napsal(a):

Quoted 5 lines

When I've been recently doing the same for ov772x and other sensor driver I've been suggested to first copy the driver into drivers/media/i2c/ and leave the original soc_camera one there, so they can be bulk removed or moved to staging. I'll let Hans confirm this, as he's about to take care of this process.

Quoted 2 lines

I would rather used git mv for preserve the git history, but if a simple copy is fine then I'm fine too ;-).

Well, 'git mv' removes the soc_camera version of this driver, and my understanding was that when those driver will be obsoleted they will be bulk removed or moved to staging by Hans.

From: Petr Cvek <[email protected]>

Initial part of ov9640 transition from soc_camera subsystem to a standalone v4l2 subdevice. The soc_camera version seems to be used only in Palm Zire72 and in (the future) HTC Magician. On these two devices the support is broken as pxa_camera driver doesn't use soc_camera anymore. The other mentions from git grep are "TODOs" (in board-osk.c) or chip names for unsupported sensors on HW which doesn't use soc_camera at all (irelevant).

Copy the driver files from soc_camera and mark the original ones in the Kconfig description as obsoleted.

Add config option VIDEO_OV9640 to the build files in drivers/media/i2c.

Signed-off-by Petr Cvek <[email protected]>

---
 drivers/media/i2c/Kconfig            |   7 +
 drivers/media/i2c/Makefile           |   1 +
 drivers/media/i2c/ov9640.c           | 739 +++++++++++++++++++++++++++
 drivers/media/i2c/ov9640.h           | 208 ++++++++
 drivers/media/i2c/soc_camera/Kconfig |   6 +-
 5 files changed, 959 insertions(+), 2 deletions(-)
 create mode 100644 drivers/media/i2c/ov9640.c
 create mode 100644 drivers/media/i2c/ov9640.h

drivers/media/i2c/Kconfig +7 -0

index 439f6be08b95..c948b163a567 100644
@@ -771,6 +771,13 @@ config VIDEO_OV7740
 	  This is a Video4Linux2 sensor driver for the OmniVision
 	  OV7740 VGA camera sensor.
 
+config VIDEO_OV9640
+	tristate "OmniVision OV9640 sensor support"
+	depends on I2C && VIDEO_V4L2
+	help
+	  This is a Video4Linux2 sensor driver for the OmniVision
+	  OV9640 camera sensor.
+
 config VIDEO_OV9650
 	tristate "OmniVision OV9650/OV9652 sensor support"
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API

drivers/media/i2c/Makefile +1 -0

index 837c428339df..9cc951f9c041 100644
@@ -77,6 +77,7 @@ obj-$(CONFIG_VIDEO_OV7640) += ov7640.o
 obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
 obj-$(CONFIG_VIDEO_OV772X) += ov772x.o
 obj-$(CONFIG_VIDEO_OV7740) += ov7740.o
+obj-$(CONFIG_VIDEO_OV9640) += ov9640.o
 obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
 obj-$(CONFIG_VIDEO_OV13858) += ov13858.o
 obj-$(CONFIG_VIDEO_MT9M032) += mt9m032.o

drivers/media/i2c/ov9640.c new file +256 -0

new file mode 100644
index 000000000000..c63948989688
@@ -0,0 +1,739 @@
+/*
+ * OmniVision OV96xx Camera Driver
+ *
+ * Copyright (C) 2009 Marek Vasut <[email protected]>
+ *
+ * Based on ov772x camera driver:
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Kuninori Morimoto <[email protected]>
+ *
+ * Based on ov7670 and soc_camera_platform driver,
+ *
+ * Copyright 2006-7 Jonathan Corbet <[email protected]>
+ * Copyright (C) 2008 Magnus Damm
+ * Copyright (C) 2008, Guennadi Liakhovetski <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/v4l2-mediabus.h>
+#include <linux/videodev2.h>
+
+#include <media/soc_camera.h>
+#include <media/v4l2-clk.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ctrls.h>
+
+#include "ov9640.h"
+
+#define to_ov9640_sensor(sd)	container_of(sd, struct ov9640_priv, subdev)
+
+/* default register setup */
+static const struct ov9640_reg ov9640_regs_dflt[] = {
+	{ OV9640_COM5,	OV9640_COM5_SYSCLK | OV9640_COM5_LONGEXP },
+	{ OV9640_COM6,	OV9640_COM6_OPT_BLC | OV9640_COM6_ADBLC_BIAS |
+			OV9640_COM6_FMT_RST | OV9640_COM6_ADBLC_OPTEN },
+	{ OV9640_PSHFT,	OV9640_PSHFT_VAL(0x01) },
+	{ OV9640_ACOM,	OV9640_ACOM_2X_ANALOG | OV9640_ACOM_RSVD },
+	{ OV9640_TSLB,	OV9640_TSLB_YUYV_UYVY },
+	{ OV9640_COM16,	OV9640_COM16_RB_AVG },
+
+	/* Gamma curve P */
+	{ 0x6c, 0x40 },	{ 0x6d, 0x30 },	{ 0x6e, 0x4b },	{ 0x6f, 0x60 },
+	{ 0x70, 0x70 },	{ 0x71, 0x70 },	{ 0x72, 0x70 },	{ 0x73, 0x70 },
+	{ 0x74, 0x60 },	{ 0x75, 0x60 },	{ 0x76, 0x50 },	{ 0x77, 0x48 },
+	{ 0x78, 0x3a },	{ 0x79, 0x2e },	{ 0x7a, 0x28 },	{ 0x7b, 0x22 },
+
+	/* Gamma curve T */
+	{ 0x7c, 0x04 },	{ 0x7d, 0x07 },	{ 0x7e, 0x10 },	{ 0x7f, 0x28 },
+	{ 0x80, 0x36 },	{ 0x81, 0x44 },	{ 0x82, 0x52 },	{ 0x83, 0x60 },
+	{ 0x84, 0x6c },	{ 0x85, 0x78 },	{ 0x86, 0x8c },	{ 0x87, 0x9e },
+	{ 0x88, 0xbb },	{ 0x89, 0xd2 },	{ 0x8a, 0xe6 },
+};
+
+/* Configurations
+ * NOTE: for YUV, alter the following registers:
+ *		COM12 |= OV9640_COM12_YUV_AVG
+ *
+ *	 for RGB, alter the following registers:
+ *		COM7  |= OV9640_COM7_RGB
+ *		COM13 |= OV9640_COM13_RGB_AVG
+ *		COM15 |= proper RGB color encoding mode
+ */
+static const struct ov9640_reg ov9640_regs_qqcif[] = {
+	{ OV9640_CLKRC,	OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x0f) },
+	{ OV9640_COM1,	OV9640_COM1_QQFMT | OV9640_COM1_HREF_2SKIP },
+	{ OV9640_COM4,	OV9640_COM4_QQ_VP | OV9640_COM4_RSVD },
+	{ OV9640_COM7,	OV9640_COM7_QCIF },
+	{ OV9640_COM12,	OV9640_COM12_RSVD },
+	{ OV9640_COM13,	OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
+	{ OV9640_COM15,	OV9640_COM15_OR_10F0 },
+};
+
+static const struct ov9640_reg ov9640_regs_qqvga[] = {
+	{ OV9640_CLKRC,	OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x07) },
+	{ OV9640_COM1,	OV9640_COM1_QQFMT | OV9640_COM1_HREF_2SKIP },
+	{ OV9640_COM4,	OV9640_COM4_QQ_VP | OV9640_COM4_RSVD },
+	{ OV9640_COM7,	OV9640_COM7_QVGA },
+	{ OV9640_COM12,	OV9640_COM12_RSVD },
+	{ OV9640_COM13,	OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
+	{ OV9640_COM15,	OV9640_COM15_OR_10F0 },
+};
+
+static const struct ov9640_reg ov9640_regs_qcif[] = {
+	{ OV9640_CLKRC,	OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x07) },
+	{ OV9640_COM4,	OV9640_COM4_QQ_VP | OV9640_COM4_RSVD },
+	{ OV9640_COM7,	OV9640_COM7_QCIF },
+	{ OV9640_COM12,	OV9640_COM12_RSVD },
+	{ OV9640_COM13,	OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
+	{ OV9640_COM15,	OV9640_COM15_OR_10F0 },
+};
+
+static const struct ov9640_reg ov9640_regs_qvga[] = {
+	{ OV9640_CLKRC,	OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x03) },
+	{ OV9640_COM4,	OV9640_COM4_QQ_VP | OV9640_COM4_RSVD },
+	{ OV9640_COM7,	OV9640_COM7_QVGA },
+	{ OV9640_COM12,	OV9640_COM12_RSVD },
+	{ OV9640_COM13,	OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
+	{ OV9640_COM15,	OV9640_COM15_OR_10F0 },
+};
+
+static const struct ov9640_reg ov9640_regs_cif[] = {
+	{ OV9640_CLKRC,	OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x03) },
+	{ OV9640_COM3,	OV9640_COM3_VP },
+	{ OV9640_COM7,	OV9640_COM7_CIF },
+	{ OV9640_COM12,	OV9640_COM12_RSVD },
+	{ OV9640_COM13,	OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
+	{ OV9640_COM15,	OV9640_COM15_OR_10F0 },
+};
+
+static const struct ov9640_reg ov9640_regs_vga[] = {
+	{ OV9640_CLKRC,	OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x01) },
+	{ OV9640_COM3,	OV9640_COM3_VP },
+	{ OV9640_COM7,	OV9640_COM7_VGA },
+	{ OV9640_COM12,	OV9640_COM12_RSVD },
+	{ OV9640_COM13,	OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
+	{ OV9640_COM15,	OV9640_COM15_OR_10F0 },
+};
+
+static const struct ov9640_reg ov9640_regs_sxga[] = {
+	{ OV9640_CLKRC,	OV9640_CLKRC_DPLL_EN | OV9640_CLKRC_DIV(0x01) },
+	{ OV9640_COM3,	OV9640_COM3_VP },
+	{ OV9640_COM7,	0 },
+	{ OV9640_COM12,	OV9640_COM12_RSVD },
+	{ OV9640_COM13,	OV9640_COM13_GAMMA_RAW | OV9640_COM13_MATRIX_EN },
+	{ OV9640_COM15,	OV9640_COM15_OR_10F0 },
+};
+
+static const struct ov9640_reg ov9640_regs_yuv[] = {
+	{ OV9640_MTX1,	0x58 },
+	{ OV9640_MTX2,	0x48 },
+	{ OV9640_MTX3,	0x10 },
+	{ OV9640_MTX4,	0x28 },
+	{ OV9640_MTX5,	0x48 },
+	{ OV9640_MTX6,	0x70 },
+	{ OV9640_MTX7,	0x40 },
+	{ OV9640_MTX8,	0x40 },
+	{ OV9640_MTX9,	0x40 },
+	{ OV9640_MTXS,	0x0f },
+};
+
+static const struct ov9640_reg ov9640_regs_rgb[] = {
+	{ OV9640_MTX1,	0x71 },
+	{ OV9640_MTX2,	0x3e },
+	{ OV9640_MTX3,	0x0c },
+	{ OV9640_MTX4,	0x33 },
+	{ OV9640_MTX5,	0x72 },
+	{ OV9640_MTX6,	0x00 },
+	{ OV9640_MTX7,	0x2b },
+	{ OV9640_MTX8,	0x66 },
+	{ OV9640_MTX9,	0xd2 },
+	{ OV9640_MTXS,	0x65 },
+};
+
+static u32 ov9640_codes[] = {
+	MEDIA_BUS_FMT_UYVY8_2X8,
+	MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE,
+	MEDIA_BUS_FMT_RGB565_2X8_LE,
+};
+
+/* read a register */
+static int ov9640_reg_read(struct i2c_client *client, u8 reg, u8 *val)
+{
+	int ret;
+	u8 data = reg;
+	struct i2c_msg msg = {
+		.addr	= client->addr,
+		.flags	= 0,
+		.len	= 1,
+		.buf	= &data,
+	};
+
+	ret = i2c_transfer(client->adapter, &msg, 1);
+	if (ret < 0)
+		goto err;
+
+	msg.flags = I2C_M_RD;
+	ret = i2c_transfer(client->adapter, &msg, 1);
+	if (ret < 0)
+		goto err;
+
+	*val = data;
+	return 0;
+
+err:
+	dev_err(&client->dev, "Failed reading register 0x%02x!\n", reg);
+	return ret;
+}
+
+/* write a register */
+static int ov9640_reg_write(struct i2c_client *client, u8 reg, u8 val)
+{
+	int ret;
+	u8 _val;
+	unsigned char data[2] = { reg, val };
+	struct i2c_msg msg = {
+		.addr	= client->addr,
+		.flags	= 0,
+		.len	= 2,
+		.buf	= data,
+	};
+
+	ret = i2c_transfer(client->adapter, &msg, 1);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed writing register 0x%02x!\n", reg);
+		return ret;
+	}
+
+	/* we have to read the register back ... no idea why, maybe HW bug */
+	ret = ov9640_reg_read(client, reg, &_val);
+	if (ret)
+		dev_err(&client->dev,
+			"Failed reading back register 0x%02x!\n", reg);
+
+	return 0;
+}
+
+
+/* Read a register, alter its bits, write it back */
+static int ov9640_reg_rmw(struct i2c_client *client, u8 reg, u8 set, u8 unset)
+{
+	u8 val;
+	int ret;
+
+	ret = ov9640_reg_read(client, reg, &val);
+	if (ret) {
+		dev_err(&client->dev,
+			"[Read]-Modify-Write of register %02x failed!\n", reg);
+		return ret;
+	}
+
+	val |= set;
+	val &= ~unset;
+
+	ret = ov9640_reg_write(client, reg, val);
+	if (ret)
+		dev_err(&client->dev,
+			"Read-Modify-[Write] of register %02x failed!\n", reg);
+
+	return ret;
+}
+
+/* Soft reset the camera. This has nothing to do with the RESET pin! */
+static int ov9640_reset(struct i2c_client *client)
+{
+	int ret;
+
+	ret = ov9640_reg_write(client, OV9640_COM7, OV9640_COM7_SCCB_RESET);
+	if (ret)

drivers/media/i2c/ov9640.c new file +54 -0

+}
+
+/* Set status of additional camera capabilities */
+static int ov9640_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct ov9640_priv *priv = container_of(ctrl->handler, struct ov9640_priv, hdl);
+	struct i2c_client *client = v4l2_get_subdevdata(&priv->subdev);
+
+	switch (ctrl->id) {
+	case V4L2_CID_VFLIP:
+		if (ctrl->val)
+			return ov9640_reg_rmw(client, OV9640_MVFP,
+							OV9640_MVFP_V, 0);
+		return ov9640_reg_rmw(client, OV9640_MVFP, 0, OV9640_MVFP_V);
+	case V4L2_CID_HFLIP:
+		if (ctrl->val)
+			return ov9640_reg_rmw(client, OV9640_MVFP,
+							OV9640_MVFP_H, 0);
+		return ov9640_reg_rmw(client, OV9640_MVFP, 0, OV9640_MVFP_H);
+	}
+	return -EINVAL;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int ov9640_get_register(struct v4l2_subdev *sd,
+				struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret;
+	u8 val;
+
+	if (reg->reg & ~0xff)
+		return -EINVAL;
+
+	reg->size = 1;
+
+	ret = ov9640_reg_read(client, reg->reg, &val);
+	if (ret)
+		return ret;
+
+	reg->val = (__u64)val;
+
+	return 0;
+}
+
+static int ov9640_set_register(struct v4l2_subdev *sd,
+				const struct v4l2_dbg_register *reg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (reg->reg & ~0xff || reg->val & ~0xff)
+		return -EINVAL;
+
+	return ov9640_reg_write(client, reg->reg, reg->val);

drivers/media/i2c/ov9640.c new file +185 -0

+	enum { QQCIF, QQVGA, QCIF, QVGA, CIF, VGA, SXGA };
+	static const int res_x[] = { 88, 160, 176, 320, 352, 640, 1280 };
+	static const int res_y[] = { 72, 120, 144, 240, 288, 480, 960 };
+
+	for (i = 0; i < ARRAY_SIZE(res_x); i++) {
+		if (res_x[i] >= *width && res_y[i] >= *height) {
+			*width = res_x[i];
+			*height = res_y[i];
+			return;
+		}
+	}
+
+	*width = res_x[SXGA];
+	*height = res_y[SXGA];
+}
+
+/* Prepare necessary register changes depending on color encoding */
+static void ov9640_alter_regs(u32 code,
+			      struct ov9640_reg_alt *alt)
+{
+	switch (code) {
+	default:
+	case MEDIA_BUS_FMT_UYVY8_2X8:
+		alt->com12	= OV9640_COM12_YUV_AVG;
+		alt->com13	= OV9640_COM13_Y_DELAY_EN |
+					OV9640_COM13_YUV_DLY(0x01);
+		break;
+	case MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE:
+		alt->com7	= OV9640_COM7_RGB;
+		alt->com13	= OV9640_COM13_RGB_AVG;
+		alt->com15	= OV9640_COM15_RGB_555;
+		break;
+	case MEDIA_BUS_FMT_RGB565_2X8_LE:
+		alt->com7	= OV9640_COM7_RGB;
+		alt->com13	= OV9640_COM13_RGB_AVG;
+		alt->com15	= OV9640_COM15_RGB_565;
+		break;
+	}
+}
+
+/* Setup registers according to resolution and color encoding */
+static int ov9640_write_regs(struct i2c_client *client, u32 width,
+		u32 code, struct ov9640_reg_alt *alts)
+{
+	const struct ov9640_reg	*ov9640_regs, *matrix_regs;
+	int			ov9640_regs_len, matrix_regs_len;
+	int			i, ret;
+	u8			val;
+
+	/* select register configuration for given resolution */
+	switch (width) {
+	case W_QQCIF:
+		ov9640_regs	= ov9640_regs_qqcif;
+		ov9640_regs_len	= ARRAY_SIZE(ov9640_regs_qqcif);
+		break;
+	case W_QQVGA:
+		ov9640_regs	= ov9640_regs_qqvga;
+		ov9640_regs_len	= ARRAY_SIZE(ov9640_regs_qqvga);
+		break;
+	case W_QCIF:
+		ov9640_regs	= ov9640_regs_qcif;
+		ov9640_regs_len	= ARRAY_SIZE(ov9640_regs_qcif);
+		break;
+	case W_QVGA:
+		ov9640_regs	= ov9640_regs_qvga;
+		ov9640_regs_len	= ARRAY_SIZE(ov9640_regs_qvga);
+		break;
+	case W_CIF:
+		ov9640_regs	= ov9640_regs_cif;
+		ov9640_regs_len	= ARRAY_SIZE(ov9640_regs_cif);
+		break;
+	case W_VGA:
+		ov9640_regs	= ov9640_regs_vga;
+		ov9640_regs_len	= ARRAY_SIZE(ov9640_regs_vga);
+		break;
+	case W_SXGA:
+		ov9640_regs	= ov9640_regs_sxga;
+		ov9640_regs_len	= ARRAY_SIZE(ov9640_regs_sxga);
+		break;
+	default:
+		dev_err(&client->dev, "Failed to select resolution!\n");
+		return -EINVAL;
+	}
+
+	/* select color matrix configuration for given color encoding */
+	if (code == MEDIA_BUS_FMT_UYVY8_2X8) {
+		matrix_regs	= ov9640_regs_yuv;
+		matrix_regs_len	= ARRAY_SIZE(ov9640_regs_yuv);
+	} else {
+		matrix_regs	= ov9640_regs_rgb;
+		matrix_regs_len	= ARRAY_SIZE(ov9640_regs_rgb);
+	}
+
+	/* write register settings into the module */
+	for (i = 0; i < ov9640_regs_len; i++) {
+		val = ov9640_regs[i].val;
+
+		switch (ov9640_regs[i].reg) {
+		case OV9640_COM7:
+			val |= alts->com7;
+			break;
+		case OV9640_COM12:
+			val |= alts->com12;
+			break;
+		case OV9640_COM13:
+			val |= alts->com13;
+			break;
+		case OV9640_COM15:
+			val |= alts->com15;
+			break;
+		}
+
+		ret = ov9640_reg_write(client, ov9640_regs[i].reg, val);
+		if (ret)
+			return ret;
+	}
+
+	/* write color matrix configuration into the module */
+	for (i = 0; i < matrix_regs_len; i++) {
+		ret = ov9640_reg_write(client, matrix_regs[i].reg,
+						matrix_regs[i].val);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+/* program default register values */
+static int ov9640_prog_dflt(struct i2c_client *client)
+{
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(ov9640_regs_dflt); i++) {
+		ret = ov9640_reg_write(client, ov9640_regs_dflt[i].reg,
+						ov9640_regs_dflt[i].val);
+		if (ret)
+			return ret;
+	}
+
+	/* wait for the changes to actually happen, 140ms are not enough yet */
+	mdelay(150);
+
+	return 0;
+}
+
+/* set the format we will capture in */
+static int ov9640_s_fmt(struct v4l2_subdev *sd,
+			struct v4l2_mbus_framefmt *mf)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct ov9640_reg_alt alts = {0};
+	int ret;
+
+	ov9640_alter_regs(mf->code, &alts);
+
+	ov9640_reset(client);
+
+	ret = ov9640_prog_dflt(client);
+	if (ret)
+		return ret;
+
+	return ov9640_write_regs(client, mf->width, mf->code, &alts);
+}
+
+static int ov9640_set_fmt(struct v4l2_subdev *sd,
+		struct v4l2_subdev_pad_config *cfg,
+		struct v4l2_subdev_format *format)
+{
+	struct v4l2_mbus_framefmt *mf = &format->format;
+
+	if (format->pad)
+		return -EINVAL;
+
+	ov9640_res_roundup(&mf->width, &mf->height);
+
+	mf->field = V4L2_FIELD_NONE;
+
+	switch (mf->code) {
+	case MEDIA_BUS_FMT_RGB555_2X8_PADHI_LE:
+	case MEDIA_BUS_FMT_RGB565_2X8_LE:
+		mf->colorspace = V4L2_COLORSPACE_SRGB;
+		break;
+	default:
+		mf->code = MEDIA_BUS_FMT_UYVY8_2X8;

drivers/media/i2c/ov9640.c new file +87 -0

+	return 0;
+}
+
+static int ov9640_get_selection(struct v4l2_subdev *sd,
+		struct v4l2_subdev_pad_config *cfg,
+		struct v4l2_subdev_selection *sel)
+{
+	if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
+		return -EINVAL;
+
+	sel->r.left = 0;
+	sel->r.top = 0;
+	switch (sel->target) {
+	case V4L2_SEL_TGT_CROP_BOUNDS:
+	case V4L2_SEL_TGT_CROP_DEFAULT:
+	case V4L2_SEL_TGT_CROP:
+		sel->r.width = W_SXGA;
+		sel->r.height = H_SXGA;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int ov9640_video_probe(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct ov9640_priv *priv = to_ov9640_sensor(sd);
+	u8		pid, ver, midh, midl;
+	const char	*devname;
+	int		ret;
+
+	ret = ov9640_s_power(&priv->subdev, 1);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * check and show product ID and manufacturer ID
+	 */
+
+	ret = ov9640_reg_read(client, OV9640_PID, &pid);
+	if (!ret)
+		ret = ov9640_reg_read(client, OV9640_VER, &ver);
+	if (!ret)
+		ret = ov9640_reg_read(client, OV9640_MIDH, &midh);
+	if (!ret)
+		ret = ov9640_reg_read(client, OV9640_MIDL, &midl);
+	if (ret)
+		goto done;
+
+	switch (VERSION(pid, ver)) {
+	case OV9640_V2:
+		devname		= "ov9640";
+		priv->revision	= 2;
+		break;
+	case OV9640_V3:
+		devname		= "ov9640";
+		priv->revision	= 3;
+		break;
+	default:
+		dev_err(&client->dev, "Product ID error %x:%x\n", pid, ver);
+		ret = -ENODEV;
+		goto done;
+	}
+
+	dev_info(&client->dev, "%s Product ID %0x:%0x Manufacturer ID %x:%x\n",
+		 devname, pid, ver, midh, midl);
+
+	ret = v4l2_ctrl_handler_setup(&priv->hdl);
+
+done:
+	ov9640_s_power(&priv->subdev, 0);
+	return ret;
+}
+
+static const struct v4l2_ctrl_ops ov9640_ctrl_ops = {
+	.s_ctrl = ov9640_s_ctrl,
+};
+
+static const struct v4l2_subdev_core_ops ov9640_core_ops = {
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.g_register		= ov9640_get_register,
+	.s_register		= ov9640_set_register,
+#endif
+	.s_power		= ov9640_s_power,
+};
+

drivers/media/i2c/ov9640.c new file +5 -0

+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
+
+	return 0;
+}

drivers/media/i2c/ov9640.c new file +26 -0

+};
+
+static const struct v4l2_subdev_ops ov9640_subdev_ops = {
+	.core	= &ov9640_core_ops,
+	.video	= &ov9640_video_ops,
+	.pad	= &ov9640_pad_ops,
+};
+
+/*
+ * i2c_driver function
+ */
+static int ov9640_probe(struct i2c_client *client,
+			const struct i2c_device_id *did)
+{
+	struct ov9640_priv *priv;
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+	int ret;
+
+	if (!ssdd) {
+		dev_err(&client->dev, "Missing platform_data for driver\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;

drivers/media/i2c/ov9640.c new file +4 -0

+		v4l2_ctrl_handler_free(&priv->hdl);
+	}
+
+	return ret;

drivers/media/i2c/ov9640.c new file +23 -0

+	return 0;
+}
+
+static const struct i2c_device_id ov9640_id[] = {
+	{ "ov9640", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ov9640_id);
+
+static struct i2c_driver ov9640_i2c_driver = {
+	.driver = {
+		.name = "ov9640",
+	},
+	.probe    = ov9640_probe,
+	.remove   = ov9640_remove,
+	.id_table = ov9640_id,
+};
+
+module_i2c_driver(ov9640_i2c_driver);
+
+MODULE_DESCRIPTION("SoC Camera driver for OmniVision OV96xx");
+MODULE_AUTHOR("Marek Vasut <[email protected]>");
+MODULE_LICENSE("GPL v2");

drivers/media/i2c/ov9640.h new file +208 -0

new file mode 100644
index 000000000000..65d13ff17536
@@ -0,0 +1,208 @@
+/*
+ * OmniVision OV96xx Camera Header File
+ *
+ * Copyright (C) 2009 Marek Vasut <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef	__DRIVERS_MEDIA_VIDEO_OV9640_H__
+#define	__DRIVERS_MEDIA_VIDEO_OV9640_H__
+
+/* Register definitions */
+#define	OV9640_GAIN	0x00
+#define	OV9640_BLUE	0x01
+#define	OV9640_RED	0x02
+#define	OV9640_VFER	0x03
+#define	OV9640_COM1	0x04
+#define	OV9640_BAVE	0x05
+#define	OV9640_GEAVE	0x06
+#define	OV9640_RSID	0x07
+#define	OV9640_RAVE	0x08
+#define	OV9640_COM2	0x09
+#define	OV9640_PID	0x0a
+#define	OV9640_VER	0x0b
+#define	OV9640_COM3	0x0c
+#define	OV9640_COM4	0x0d
+#define	OV9640_COM5	0x0e
+#define	OV9640_COM6	0x0f
+#define	OV9640_AECH	0x10
+#define	OV9640_CLKRC	0x11
+#define	OV9640_COM7	0x12
+#define	OV9640_COM8	0x13
+#define	OV9640_COM9	0x14
+#define	OV9640_COM10	0x15
+/* 0x16 - RESERVED */
+#define	OV9640_HSTART	0x17
+#define	OV9640_HSTOP	0x18
+#define	OV9640_VSTART	0x19
+#define	OV9640_VSTOP	0x1a
+#define	OV9640_PSHFT	0x1b
+#define	OV9640_MIDH	0x1c
+#define	OV9640_MIDL	0x1d
+#define	OV9640_MVFP	0x1e
+#define	OV9640_LAEC	0x1f
+#define	OV9640_BOS	0x20
+#define	OV9640_GBOS	0x21
+#define	OV9640_GROS	0x22
+#define	OV9640_ROS	0x23
+#define	OV9640_AEW	0x24
+#define	OV9640_AEB	0x25
+#define	OV9640_VPT	0x26
+#define	OV9640_BBIAS	0x27
+#define	OV9640_GBBIAS	0x28
+/* 0x29 - RESERVED */
+#define	OV9640_EXHCH	0x2a
+#define	OV9640_EXHCL	0x2b
+#define	OV9640_RBIAS	0x2c
+#define	OV9640_ADVFL	0x2d
+#define	OV9640_ADVFH	0x2e
+#define	OV9640_YAVE	0x2f
+#define	OV9640_HSYST	0x30
+#define	OV9640_HSYEN	0x31
+#define	OV9640_HREF	0x32
+#define	OV9640_CHLF	0x33
+#define	OV9640_ARBLM	0x34
+/* 0x35..0x36 - RESERVED */
+#define	OV9640_ADC	0x37
+#define	OV9640_ACOM	0x38
+#define	OV9640_OFON	0x39
+#define	OV9640_TSLB	0x3a
+#define	OV9640_COM11	0x3b
+#define	OV9640_COM12	0x3c
+#define	OV9640_COM13	0x3d
+#define	OV9640_COM14	0x3e
+#define	OV9640_EDGE	0x3f
+#define	OV9640_COM15	0x40
+#define	OV9640_COM16	0x41
+#define	OV9640_COM17	0x42
+/* 0x43..0x4e - RESERVED */
+#define	OV9640_MTX1	0x4f
+#define	OV9640_MTX2	0x50
+#define	OV9640_MTX3	0x51
+#define	OV9640_MTX4	0x52
+#define	OV9640_MTX5	0x53
+#define	OV9640_MTX6	0x54
+#define	OV9640_MTX7	0x55
+#define	OV9640_MTX8	0x56
+#define	OV9640_MTX9	0x57
+#define	OV9640_MTXS	0x58
+/* 0x59..0x61 - RESERVED */
+#define	OV9640_LCC1	0x62
+#define	OV9640_LCC2	0x63
+#define	OV9640_LCC3	0x64
+#define	OV9640_LCC4	0x65
+#define	OV9640_LCC5	0x66
+#define	OV9640_MANU	0x67
+#define	OV9640_MANV	0x68
+#define	OV9640_HV	0x69
+#define	OV9640_MBD	0x6a
+#define	OV9640_DBLV	0x6b
+#define	OV9640_GSP	0x6c	/* ... till 0x7b */
+#define	OV9640_GST	0x7c	/* ... till 0x8a */
+
+#define	OV9640_CLKRC_DPLL_EN	0x80
+#define	OV9640_CLKRC_DIRECT	0x40
+#define	OV9640_CLKRC_DIV(x)	((x) & 0x3f)
+
+#define	OV9640_PSHFT_VAL(x)	((x) & 0xff)
+
+#define	OV9640_ACOM_2X_ANALOG	0x80
+#define	OV9640_ACOM_RSVD	0x12
+
+#define	OV9640_MVFP_V		0x10
+#define	OV9640_MVFP_H		0x20
+
+#define	OV9640_COM1_HREF_NOSKIP	0x00
+#define	OV9640_COM1_HREF_2SKIP	0x04
+#define	OV9640_COM1_HREF_3SKIP	0x08
+#define	OV9640_COM1_QQFMT	0x20
+
+#define	OV9640_COM2_SSM		0x10
+
+#define	OV9640_COM3_VP		0x04
+
+#define	OV9640_COM4_QQ_VP	0x80
+#define	OV9640_COM4_RSVD	0x40
+
+#define	OV9640_COM5_SYSCLK	0x80
+#define	OV9640_COM5_LONGEXP	0x01
+
+#define	OV9640_COM6_OPT_BLC	0x40
+#define	OV9640_COM6_ADBLC_BIAS	0x08
+#define	OV9640_COM6_FMT_RST	0x82
+#define	OV9640_COM6_ADBLC_OPTEN	0x01
+
+#define	OV9640_COM7_RAW_RGB	0x01
+#define	OV9640_COM7_RGB		0x04
+#define	OV9640_COM7_QCIF	0x08
+#define	OV9640_COM7_QVGA	0x10
+#define	OV9640_COM7_CIF		0x20
+#define	OV9640_COM7_VGA		0x40
+#define	OV9640_COM7_SCCB_RESET	0x80
+
+#define	OV9640_TSLB_YVYU_YUYV	0x04
+#define	OV9640_TSLB_YUYV_UYVY	0x08
+
+#define	OV9640_COM12_YUV_AVG	0x04
+#define	OV9640_COM12_RSVD	0x40
+
+#define	OV9640_COM13_GAMMA_NONE	0x00
+#define	OV9640_COM13_GAMMA_Y	0x40
+#define	OV9640_COM13_GAMMA_RAW	0x80
+#define	OV9640_COM13_RGB_AVG	0x20
+#define	OV9640_COM13_MATRIX_EN	0x10
+#define	OV9640_COM13_Y_DELAY_EN	0x08
+#define	OV9640_COM13_YUV_DLY(x)	((x) & 0x07)
+
+#define	OV9640_COM15_OR_00FF	0x00
+#define	OV9640_COM15_OR_01FE	0x40
+#define	OV9640_COM15_OR_10F0	0xc0
+#define	OV9640_COM15_RGB_NORM	0x00
+#define	OV9640_COM15_RGB_565	0x10
+#define	OV9640_COM15_RGB_555	0x30
+
+#define	OV9640_COM16_RB_AVG	0x01
+
+/* IDs */
+#define	OV9640_V2		0x9648
+#define	OV9640_V3		0x9649
+#define	VERSION(pid, ver)	(((pid) << 8) | ((ver) & 0xFF))
+
+/* supported resolutions */
+enum {
+	W_QQCIF	= 88,
+	W_QQVGA	= 160,
+	W_QCIF	= 176,
+	W_QVGA	= 320,
+	W_CIF	= 352,
+	W_VGA	= 640,
+	W_SXGA	= 1280
+};
+#define	H_SXGA	960
+
+/* Misc. structures */
+struct ov9640_reg_alt {
+	u8	com7;
+	u8	com12;
+	u8	com13;
+	u8	com15;
+};
+
+struct ov9640_reg {
+	u8	reg;
+	u8	val;
+};
+
+struct ov9640_priv {
+	struct v4l2_subdev		subdev;
+	struct v4l2_ctrl_handler	hdl;
+	struct v4l2_clk			*clk;
+
+	int				model;
+	int				revision;
+};
+
+#endif	/* __DRIVERS_MEDIA_VIDEO_OV9640_H__ */

drivers/media/i2c/soc_camera/Kconfig +4 -2

index 7c2aabc8a3f6..7d7b801ab2ce 100644
@@ -42,10 +42,12 @@ config SOC_CAMERA_OV772X
 	  This is a ov772x camera driver
 
 config SOC_CAMERA_OV9640
-	tristate "ov9640 camera support"
+	tristate "ov9640 camera support (OBSOLETE)"
+	default n
 	depends on SOC_CAMERA && I2C
 	help
-	  This is a ov9640 camera driver
+	  This is an obsoleted version of ov9640 camera driver. Please use
+	  the v4l2 standalone one (VIDEO_OV9640).
 
 config SOC_CAMERA_OV9740
 	tristate "ov9740 camera support"

Hi Petr,

Thanks for the patchset, and my apologies for reviewing it so late!

I'm commenting this one but feel free to add patches to address the comments.

drivers/media/i2c/ov9640.c line 266

Quoted 4 lines

drivers/media/i2c/ov9640.c new file +4 -0

+/* Start/Stop streaming from the device */
+static int ov9640_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	return 0;

Doesn't the sensor provide any control over the streaming state? Just wondering...

drivers/media/i2c/ov9640.c line 330

Quoted 7 lines

drivers/media/i2c/ov9640.c new file +7 -0

+static int ov9640_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+	struct ov9640_priv *priv = to_ov9640_sensor(sd);
+
+	return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);

Runtime PM support would be nice --- but not needed in this set IMO.

drivers/media/i2c/ov9640.c line 336

Quoted 6 lines

drivers/media/i2c/ov9640.c new file +6 -0

+}
+
+/* select nearest higher resolution for capture */
+static void ov9640_res_roundup(u32 *width, u32 *height)
+{
+	int i;

unsigned int

Same for other loops where no negative values or test below zero are needed (or where the value which is compared against is signed).

drivers/media/i2c/ov9640.c line 531

Quoted 2 lines

drivers/media/i2c/ov9640.c new file +2 -0

+
+	cfg->try_fmt = *mf;

Newline here?

drivers/media/i2c/ov9640.c line 542

Quoted 11 lines

drivers/media/i2c/ov9640.c new file +11 -0

+	return 0;
+}
+
+static int ov9640_enum_mbus_code(struct v4l2_subdev *sd,
+		struct v4l2_subdev_pad_config *cfg,
+		struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->pad || code->index >= ARRAY_SIZE(ov9640_codes))
+		return -EINVAL;
+
+	code->code = ov9640_codes[code->index];

And here.

Quoted 6 lines

drivers/media/i2c/ov9640.c new file +6 -0

+/* Request bus settings on camera side */
+static int ov9640_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);

drivers/media/i2c/ov9640.c line 639

Quoted 4 lines

drivers/media/i2c/ov9640.c new file +4 -0

+
+	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;

This should come from DT instead. Could you add DT binding documentation for the sensor, please? There's already some for ov9650; I wonder how similar that one is.

Quoted 9 lines

drivers/media/i2c/ov9640.c new file +9 -0

+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops ov9640_video_ops = {
+	.s_stream	= ov9640_s_stream,
+	.g_mbus_config	= ov9640_g_mbus_config,

drivers/media/i2c/ov9640.c line 654

Quoted 6 lines

drivers/media/i2c/ov9640.c new file +6 -0

+};
+
+static const struct v4l2_subdev_pad_ops ov9640_pad_ops = {
+	.enum_mbus_code = ov9640_enum_mbus_code,
+	.get_selection	= ov9640_get_selection,
+	.set_fmt	= ov9640_set_fmt,

Please add an operating to get the format as well.

Quoted 32 lines

drivers/media/i2c/ov9640.c new file +31 -0

+};
+
+static const struct v4l2_subdev_ops ov9640_subdev_ops = {
+	.core	= &ov9640_core_ops,
+	.video	= &ov9640_video_ops,
+	.pad	= &ov9640_pad_ops,
+};
+
+/*
+ * i2c_driver function
+ */
+static int ov9640_probe(struct i2c_client *client,
+			const struct i2c_device_id *did)
+{
+	struct ov9640_priv *priv;
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+	int ret;
+
+	if (!ssdd) {
+		dev_err(&client->dev, "Missing platform_data for driver\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	v4l2_i2c_subdev_init(&priv->subdev, client, &ov9640_subdev_ops);
+
+	v4l2_ctrl_handler_init(&priv->hdl, 2);
+	v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops,

drivers/media/i2c/ov9640.c line 690

Quoted 5 lines

drivers/media/i2c/ov9640.c new file +5 -0

+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+	priv->subdev.ctrl_handler = &priv->hdl;
+	if (priv->hdl.error)

v4l2_ctrl_handler_free() is missing here. The function would benefit from goto-based error handling.

Dne 14.9.2018 v 14:59 Sakari Ailus napsal(a):

Quoted 7 lines

Hi Petr,

Thanks for the patchset, and my apologies for reviewing it so late!

I'm commenting this one but feel free to add patches to address the comments.

Hi and thanks for the review. I would like to have this patch set to be as much as possible only a conversion from soc-camera, but I guess I can fix the error handling in probe and the missing newlines. For the enhanced functionality, I would like to have a new patch set after I'll patch the controller (pxa camera) on my testing platform.

Quoted 8 lines

drivers/media/i2c/ov9640.c line 266

Quoted 4 lines

drivers/media/i2c/ov9640.c new file +4 -0

+/* Start/Stop streaming from the device */
+static int ov9640_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	return 0;

Doesn't the sensor provide any control over the streaming state? Just wondering...

Before the PXA camera switch from soc-camera I've found some deficiencies in register settings so I'm planning to test them all. With the current state of vanilla I wouldn't be able to test the change. After the quick search in datasheet I wasn't able to find any (stream, capture, start) flag. It may be controlled by just setting the output format flags, but these registers are some of those I will be changing in the future.

Quoted 10 lines

drivers/media/i2c/ov9640.c line 330

Quoted 7 lines

drivers/media/i2c/ov9640.c new file +7 -0

+static int ov9640_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+	struct ov9640_priv *priv = to_ov9640_sensor(sd);
+
+	return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);

Runtime PM support would be nice --- but not needed in this set IMO.

If I remember correctly a suspend to mem will freeze the whole machine, so in the future :-/.

Quoted 9 lines

drivers/media/i2c/ov9640.c line 336

Quoted 6 lines

drivers/media/i2c/ov9640.c new file +6 -0

+}
+
+/* select nearest higher resolution for capture */
+static void ov9640_res_roundup(u32 *width, u32 *height)
+{
+	int i;

unsigned int

Quoted 3 lines

Same for other loops where no negative values or test below zero are needed (or where the value which is compared against is signed).

Just re-declaring: unsigned int i; ... OK

Quoted 6 lines

drivers/media/i2c/ov9640.c line 531

Quoted 3 lines

drivers/media/i2c/ov9640.c new file +2 -0

+
+	cfg->try_fmt = *mf;

Newline here?

Quoted 14 lines

drivers/media/i2c/ov9640.c line 542

Quoted 11 lines

drivers/media/i2c/ov9640.c new file +11 -0

+	return 0;
+}
+
+static int ov9640_enum_mbus_code(struct v4l2_subdev *sd,
+		struct v4l2_subdev_pad_config *cfg,
+		struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->pad || code->index >= ARRAY_SIZE(ov9640_codes))
+		return -EINVAL;
+
+	code->code = ov9640_codes[code->index];

And here.

np

Quoted 6 lines

Quoted 6 lines

drivers/media/i2c/ov9640.c new file +6 -0

+/* Request bus settings on camera side */
+static int ov9640_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);

Quoted 8 lines

drivers/media/i2c/ov9640.c line 639

Quoted 4 lines

drivers/media/i2c/ov9640.c new file +4 -0

+
+	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;

This should come from DT instead. Could you add DT binding documentation for the sensor, please? There's already some for ov9650; I wonder how similar that one is.

The platform doesn't support it yet, so I have no way to test any DT patches.

Quoted 10 lines

Quoted 10 lines

drivers/media/i2c/ov9640.c new file +9 -0

+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops ov9640_video_ops = {
+	.s_stream	= ov9640_s_stream,
+	.g_mbus_config	= ov9640_g_mbus_config,

Quoted 8 lines

drivers/media/i2c/ov9640.c line 654

Quoted 6 lines

drivers/media/i2c/ov9640.c new file +6 -0

+};
+
+static const struct v4l2_subdev_pad_ops ov9640_pad_ops = {
+	.enum_mbus_code = ov9640_enum_mbus_code,
+	.get_selection	= ov9640_get_selection,
+	.set_fmt	= ov9640_set_fmt,

Please add an operating to get the format as well.

OK, but it will be tested on a preliminary hacked pxa-camera :-).

Quoted 33 lines

Quoted 33 lines

drivers/media/i2c/ov9640.c new file +31 -0

+};
+
+static const struct v4l2_subdev_ops ov9640_subdev_ops = {
+	.core	= &ov9640_core_ops,
+	.video	= &ov9640_video_ops,
+	.pad	= &ov9640_pad_ops,
+};
+
+/*
+ * i2c_driver function
+ */
+static int ov9640_probe(struct i2c_client *client,
+			const struct i2c_device_id *did)
+{
+	struct ov9640_priv *priv;
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+	int ret;
+
+	if (!ssdd) {
+		dev_err(&client->dev, "Missing platform_data for driver\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	v4l2_i2c_subdev_init(&priv->subdev, client, &ov9640_subdev_ops);
+
+	v4l2_ctrl_handler_init(&priv->hdl, 2);
+	v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops,

Quoted 9 lines

drivers/media/i2c/ov9640.c line 690

Quoted 5 lines

drivers/media/i2c/ov9640.c new file +5 -0

+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+	priv->subdev.ctrl_handler = &priv->hdl;
+	if (priv->hdl.error)

v4l2_ctrl_handler_free() is missing here. The function would benefit from goto-based error handling.

+ rest -> np

Hi Petr,

What's the status of this set? It would seem that addressing the issues is fairly trivial. Please also see a few comments below.

Quoted 56 lines

Dne 14.9.2018 v 14:59 Sakari Ailus napsal(a):

Quoted 7 lines

Hi Petr,

Thanks for the patchset, and my apologies for reviewing it so late!

I'm commenting this one but feel free to add patches to address the comments.

Hi and thanks for the review. I would like to have this patch set to be as much as possible only a conversion from soc-camera, but I guess I can fix the error handling in probe and the missing newlines. For the enhanced functionality, I would like to have a new patch set after I'll patch the controller (pxa camera) on my testing platform.

Quoted 8 lines

drivers/media/i2c/ov9640.c line 266

Quoted 4 lines

drivers/media/i2c/ov9640.c new file +4 -0

+/* Start/Stop streaming from the device */
+static int ov9640_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	return 0;

Doesn't the sensor provide any control over the streaming state? Just wondering...

Before the PXA camera switch from soc-camera I've found some deficiencies in register settings so I'm planning to test them all. With the current state of vanilla I wouldn't be able to test the change. After the quick search in datasheet I wasn't able to find any (stream, capture, start) flag. It may be controlled by just setting the output format flags, but these registers are some of those I will be changing in the future.

Quoted 10 lines

drivers/media/i2c/ov9640.c line 330

Quoted 7 lines

drivers/media/i2c/ov9640.c new file +7 -0

+static int ov9640_s_power(struct v4l2_subdev *sd, int on)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+	struct ov9640_priv *priv = to_ov9640_sensor(sd);
+
+	return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);

Runtime PM support would be nice --- but not needed in this set IMO.

If I remember correctly a suspend to mem will freeze the whole machine, so in the future :-/.

Quoted 9 lines

drivers/media/i2c/ov9640.c line 336

Quoted 6 lines

drivers/media/i2c/ov9640.c new file +6 -0

+}
+
+/* select nearest higher resolution for capture */
+static void ov9640_res_roundup(u32 *width, u32 *height)
+{
+	int i;

unsigned int

Quoted 4 lines

Quoted 3 lines

Same for other loops where no negative values or test below zero are needed (or where the value which is compared against is signed).

Just re-declaring: unsigned int i; ... OK

Yes.

Quoted 38 lines

Quoted 6 lines

drivers/media/i2c/ov9640.c line 531

Quoted 3 lines

drivers/media/i2c/ov9640.c new file +2 -0

+
+	cfg->try_fmt = *mf;

Newline here?

Quoted 14 lines

drivers/media/i2c/ov9640.c line 542

Quoted 11 lines

drivers/media/i2c/ov9640.c new file +11 -0

+	return 0;
+}
+
+static int ov9640_enum_mbus_code(struct v4l2_subdev *sd,
+		struct v4l2_subdev_pad_config *cfg,
+		struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->pad || code->index >= ARRAY_SIZE(ov9640_codes))
+		return -EINVAL;
+
+	code->code = ov9640_codes[code->index];

And here.

np

Quoted 6 lines

Quoted 6 lines

drivers/media/i2c/ov9640.c new file +6 -0

+/* Request bus settings on camera side */
+static int ov9640_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);

Quoted 8 lines

drivers/media/i2c/ov9640.c line 639

Quoted 4 lines

drivers/media/i2c/ov9640.c new file +4 -0

+
+	cfg->flags = V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_MASTER |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_HIGH |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;

This should come from DT instead. Could you add DT binding documentation for the sensor, please? There's already some for ov9650; I wonder how similar that one is.

Quoted 2 lines

The platform doesn't support it yet, so I have no way to test any DT patches.

Ack. It's fine to leave that out now.

Quoted 19 lines

Quoted 10 lines

Quoted 10 lines

drivers/media/i2c/ov9640.c new file +9 -0

+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
+
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops ov9640_video_ops = {
+	.s_stream	= ov9640_s_stream,
+	.g_mbus_config	= ov9640_g_mbus_config,

Quoted 8 lines

drivers/media/i2c/ov9640.c line 654

Quoted 6 lines

drivers/media/i2c/ov9640.c new file +6 -0

+};
+
+static const struct v4l2_subdev_pad_ops ov9640_pad_ops = {
+	.enum_mbus_code = ov9640_enum_mbus_code,
+	.get_selection	= ov9640_get_selection,
+	.set_fmt	= ov9640_set_fmt,

Please add an operating to get the format as well.

Quoted 1 line

OK, but it will be tested on a preliminary hacked pxa-camera :-).

That's fine.

Quoted 44 lines

Quoted 33 lines

Quoted 33 lines

drivers/media/i2c/ov9640.c new file +31 -0

+};
+
+static const struct v4l2_subdev_ops ov9640_subdev_ops = {
+	.core	= &ov9640_core_ops,
+	.video	= &ov9640_video_ops,
+	.pad	= &ov9640_pad_ops,
+};
+
+/*
+ * i2c_driver function
+ */
+static int ov9640_probe(struct i2c_client *client,
+			const struct i2c_device_id *did)
+{
+	struct ov9640_priv *priv;
+	struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
+	int ret;
+
+	if (!ssdd) {
+		dev_err(&client->dev, "Missing platform_data for driver\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	v4l2_i2c_subdev_init(&priv->subdev, client, &ov9640_subdev_ops);
+
+	v4l2_ctrl_handler_init(&priv->hdl, 2);
+	v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops,

Quoted 9 lines

drivers/media/i2c/ov9640.c line 690

Quoted 5 lines

drivers/media/i2c/ov9640.c new file +5 -0

+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&priv->hdl, &ov9640_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+	priv->subdev.ctrl_handler = &priv->hdl;
+	if (priv->hdl.error)

v4l2_ctrl_handler_free() is missing here. The function would benefit from goto-based error handling.

+ rest -> np

From: Petr Cvek <[email protected]>

This patch series transfer the ov9640 driver from the soc_camera subsystem into a standalone v4l2 driver. There is no changes except the required v4l2_async calls, GPIO allocation, deletion of now unused variables, a change from mdelay() to msleep() and an addition of SPDX identifiers (as suggested in the v1 version RFC).

The config symbol has been changed from CONFIG_SOC_CAMERA_OV9640 to CONFIG_VIDEO_OV9640.

Also as the drivers of the soc_camera seems to be orphaned I'm volunteering as a maintainer of the driver (I own the hardware).

Hi Petr,

Quoted 8 lines · On Wed, Aug 15, 2018 at 03:30:23PM +0200, [email protected] wrote:

From: Petr Cvek <[email protected]>

This patch series transfer the ov9640 driver from the soc_camera subsystem into a standalone v4l2 driver. There is no changes except the required v4l2_async calls, GPIO allocation, deletion of now unused variables, a change from mdelay() to msleep() and an addition of SPDX identifiers (as suggested in the v1 version RFC).

Quoted 5 lines

The config symbol has been changed from CONFIG_SOC_CAMERA_OV9640 to CONFIG_VIDEO_OV9640.

Also as the drivers of the soc_camera seems to be orphaned I'm volunteering as a maintainer of the driver (I own the hardware).

Thanks for the set. The patches seem good to me as such but there's some more work to do there. For one, the depedency to v4l2_clk should be removed; the common clock framework has supported clocks from random devices for many, many years now.

The PXA camera driver does still depend on v4l2_clk so I guess this is better to do later on in a different patchset.