Skip to contentSkip to conversation

net: dev: BYPASS for lockless qdisc

PATCH Superseded Paolo Abeni 3 participants 6 messages Mar 22, 2019

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Paolo Abeni

author maintainer
#0 lore raw

v2 cover net: dev: BYPASS for lockless qdisc

This patch series is aimed at improving xmit performances of lockless qdisc in the uncontended scenario.

After the lockless refactor pfifo_fast can't leverage the BYPASS optimization. Due to retpolines the overhead for the avoidables enqueue and dequeue operations has increased and we see measurable regressions.

The first patch introduces the BYPASS code path for lockless qdisc, and the second one optimizes such path further. Overall this avoids up to 3 indirect calls per xmit packet. Detailed performance figures are reported in the 2nd patch.

v1 -> v2:
- use really an 'empty' flag instead of 'not_empty', as suggested by Eric

Paolo Abeni (2):
net: sched: add empty status flag for NOLOCK qdisc
net: dev: introduce support for sch BYPASS for lockless qdisc

 include/net/sch_generic.h | 11 +++++++++++
 net/core/dev.c            |  9 +++++++++
 net/sched/sch_generic.c   |  3 +++
 3 files changed, 23 insertions(+)
Signature · 1 line
2.20.1
author maintainer
#1 lore raw

PATCH v2 1/2 net: sched: add empty status flag for NOLOCK qdisc

The queue is marked not empty after acquiring the seqlock, and it's up to the NOLOCK qdisc clearing such flag on dequeue. Since the empty status lays on the same cache-line of the seqlock, it's always hot on cache during the updates.

This makes the empty flag update a little bit loosy. Given the lack of synchronization between enqueue and dequeue, this is unavoidable.

v1 -> v2:
- use really an 'empty' flag instead of 'not_empty', as suggested by Eric

---
 include/net/sch_generic.h | 11 +++++++++++
 net/sched/sch_generic.c   |  3 +++
 2 files changed, 14 insertions(+)
include/net/sch_generic.h +11 -0
index 31284c078d06..15c62501b243 100644
@@ -113,6 +113,9 @@ struct Qdisc {
 
 	spinlock_t		busylock ____cacheline_aligned_in_smp;
 	spinlock_t		seqlock;
+
+	/* for NOLOCK qdisc, true if there are no enqueued skbs */
+	bool			empty;
 	struct rcu_head		rcu;
 };
 
@@ -143,11 +146,19 @@ static inline bool qdisc_is_running(struct Qdisc *qdisc)
 	return (raw_read_seqcount(&qdisc->running) & 1) ? true : false;
 }
 
+static inline bool qdisc_is_empty(struct Qdisc *qdisc)
+{
+	if (qdisc->flags & TCQ_F_NOLOCK)
+		return qdisc->empty;
+	return !qdisc->q.qlen;
+}
+
 static inline bool qdisc_run_begin(struct Qdisc *qdisc)
 {
 	if (qdisc->flags & TCQ_F_NOLOCK) {
 		if (!spin_trylock(&qdisc->seqlock))
 			return false;
+		qdisc->empty = false;
 	} else if (qdisc_is_running(qdisc)) {
 		return false;
 	}
net/sched/sch_generic.c +3 -0
index a117d9260558..81356ef38d1d 100644
@@ -671,6 +671,8 @@ static struct sk_buff *pfifo_fast_dequeue(struct Qdisc *qdisc)
 		qdisc_qstats_cpu_backlog_dec(qdisc, skb);
 		qdisc_bstats_cpu_update(qdisc, skb);
 		qdisc_qstats_atomic_qlen_dec(qdisc);
+	} else {
+		qdisc->empty = true;
 	}
 
 	return skb;
@@ -880,6 +882,7 @@ struct Qdisc *qdisc_alloc(struct netdev_queue *dev_queue,
 	sch->enqueue = ops->enqueue;
 	sch->dequeue = ops->dequeue;
 	sch->dev_queue = dev_queue;
+	sch->empty = true;
 	dev_hold(dev);
 	refcount_set(&sch->refcnt, 1);
 
Signature · 1 line
2.20.1
#2 lore raw

Re: [PATCH net-next v2 1/2] net: sched: add empty status flag for NOLOCK qdisc

Quoted 9 lines · Paolo Abeni

The queue is marked not empty after acquiring the seqlock, and it's up to the NOLOCK qdisc clearing such flag on dequeue. Since the empty status lays on the same cache-line of the seqlock, it's always hot on cache during the updates.

+static inline bool qdisc_is_empty(struct Qdisc *qdisc)

const struct Qdisc *qdisc

include/net/sch_generic.h static inline bool qdisc_is_running(struct Qdisc *qdisc) · line 155

Quoted 6 lines
include/net/sch_generic.h +6 -0
+{
+	if (qdisc->flags & TCQ_F_NOLOCK)
+		return qdisc->empty;
+	return !qdisc->q.qlen;
+}
+

Other than that :

author maintainer
#3 lore raw

PATCH v2 2/2 net: dev: introduce support for sch BYPASS for lockless qdisc

In reply to Paolo Abeni

With commit c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array") pfifo_fast no longer benefit from the TCQ_F_CAN_BYPASS optimization. Due to retpolines the cost of the enqueue()/dequeue() pair has become relevant and we observe measurable regression for the uncontended scenario when the packet-rate is below line rate.

After commit 46b1c18f9deb ("net: sched: put back q.qlen into a single location") we can check for empty qdisc with a reasonably fast operation even for nolock qdiscs.

This change extends TCQ_F_CAN_BYPASS support to nolock qdisc. The new chunk of code mirrors closely the existing one for traditional qdisc, leveraging a newly introduced helper to read atomically the qdisc length.

Tested with pktgen in queue xmit mode, with pfifo_fast, a MQ device, and MQ root qdisc:

threads         vanilla         patched
                kpps            kpps
1               2465            2889
2               4304            5188
4               7898            9589

Same as above, but with a single queue device:

threads         vanilla         patched
                kpps            kpps
1               2556            2827
2               2900            2900
4               5000            5000
8               4700            4700

No mesaurable changes in the contended scenarios, and more 10% improvement in the uncontended ones.

v1 -> v2:
- rebased after flag name change

---
 net/core/dev.c | 9 +++++++++
 1 file changed, 9 insertions(+)
net/core/dev.c +9 -0
index 2b67f2aa59dd..e6cf39a9d3c5 100644
@@ -3468,6 +3468,15 @@ static inline int __dev_xmit_skb(struct sk_buff *skb, struct Qdisc *q,
 		if (unlikely(test_bit(__QDISC_STATE_DEACTIVATED, &q->state))) {
 			__qdisc_drop(skb, &to_free);
 			rc = NET_XMIT_DROP;
+		} else if ((q->flags & TCQ_F_CAN_BYPASS) && q->empty &&
+			   qdisc_run_begin(q)) {
+			qdisc_bstats_cpu_update(q, skb);
+
+			if (sch_direct_xmit(skb, q, dev, txq, NULL, true))
+				__qdisc_run(q);
+
+			qdisc_run_end(q);
+			rc = NET_XMIT_SUCCESS;
 		} else {
 			rc = q->enqueue(skb, q, &to_free) & NET_XMIT_MASK;
 			qdisc_run(q);
Signature · 1 line
2.20.1
Reviewed-by on v2 2/2
#4 lore raw

Re: [PATCH net-next v2 2/2] net: dev: introduce support for sch BYPASS for lockless qdisc

Quoted 5 lines · Paolo Abeni

With commit c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array") pfifo_fast no longer benefit from the TCQ_F_CAN_BYPASS optimization. Due to retpolines the cost of the enqueue()/dequeue() pair has become relevant and we observe measurable regression for the uncontended scenario when the packet-rate is below line rate.

Reviewed-by on the v2 series
#5 lore raw
In reply to Paolo Abeni
Quoted 16 lines · Paolo Abeni

This patch series is aimed at improving xmit performances of lockless qdisc in the uncontended scenario.

After the lockless refactor pfifo_fast can't leverage the BYPASS optimization. Due to retpolines the overhead for the avoidables enqueue and dequeue operations has increased and we see measurable regressions.

The first patch introduces the BYPASS code path for lockless qdisc, and the second one optimizes such path further. Overall this avoids up to 3 indirect calls per xmit packet. Detailed performance figures are reported in the 2nd patch.

v1 -> v2:
- use really an 'empty' flag instead of 'not_empty', as suggested by Eric

Quoted 9 lines

Paolo Abeni (2):
net: sched: add empty status flag for NOLOCK qdisc
net: dev: introduce support for sch BYPASS for lockless qdisc

  include/net/sch_generic.h | 11 +++++++++++
  net/core/dev.c            |  9 +++++++++
  net/sched/sch_generic.c   |  3 +++
  3 files changed, 23 insertions(+)