net/mlx5: use indirect call wrappers
Paolo Abeni
maintainerv2 cover net/mlx5: use indirect call wrappers
The mlx5_core driver uses several indirect calls in fast-path, some of them are invoked on each ingress packet, even for the XDP-only traffic.
This series leverage the indirect call wrappers infrastructure the avoid the expansive RETPOLINE overhead for 2 indirect calls in fast-path.
Each call is addressed on a different patch, plus we need to introduce a couple of additional helpers to cope with the higher number of possible direct-call alternatives.
v1 - v2:
- update the direct call list and use a macro to define it,
as per Saeed suggestion. An intermediated additional
macro is needed to allow arg list expansion
- patch 2/3 is unchanged, as the generated code looks better this way than with possible alternative (dropping BP hits)
Paolo Abeni (3):
net/mlx5e: use indirect calls wrapper for skb allocation indirect call wrappers: add helpers for 3 and 4 ways switch net/mlx5e: use indirect calls wrapper for the rx packet handler
drivers/net/ethernet/mellanox/mlx5/core/en.h | 4 +++ .../net/ethernet/mellanox/mlx5/core/en_rx.c | 27 ++++++++++++++----- include/linux/indirect_call_wrapper.h | 12 +++++++++ 3 files changed, 37 insertions(+), 6 deletions(-)
Signature · 1 line
2.20.1
Paolo Abeni
maintainerPATCH v2 1/3 net/mlx5e: use indirect calls wrapper for skb allocation
We can avoid an indirect call per packet wrapping the skb creation with the appropriate helper.
--- .../net/ethernet/mellanox/mlx5/core/en_rx.c | 22 ++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +17 -5
@@ -34,6 +34,7 @@#include <linux/ip.h> #include <linux/ipv6.h> #include <linux/tcp.h> +#include <linux/indirect_call_wrapper.h> #include <net/ip6_checksum.h> #include <net/page_pool.h> #include <net/inet_ecn.h>
@@ -1092,7 +1093,10 @@ void mlx5e_handle_rx_cqe(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe) wi =get_frag (rq, ci); cqe_bcnt =be32_to_cpu (cqe->byte_cnt); - skb = rq->wqe.skb_from_cqe (rq, cqe, wi, cqe_bcnt); + skb =INDIRECT_CALL_2 (rq->wqe.skb_from_cqe, + mlx5e_skb_from_cqe_linear, + mlx5e_skb_from_cqe_nonlinear, + rq, cqe, wi, cqe_bcnt);if (!skb) {/* probably for XDP */ if (__test_and_clear_bit (MLX5E_RQ_FLAG_XDP_XMIT , rq->flags)) {
@@ -1279,8 +1283,10 @@ void mlx5e_handle_rx_cqe_mpwrq(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe) cqe_bcnt =mpwrq_get_cqe_byte_cnt (cqe); - skb = rq->mpwqe.skb_from_cqe_mpwrq (rq, wi, cqe_bcnt, head_offset, - page_idx); + skb =INDIRECT_CALL_2 (rq->mpwqe.skb_from_cqe_mpwrq, + mlx5e_skb_from_cqe_mpwrq_linear, + mlx5e_skb_from_cqe_mpwrq_nonlinear, + rq, wi, cqe_bcnt, head_offset, page_idx);if (!skb) goto mpwrq_cqe_out;
@@ -1437,7 +1443,10 @@ void mlx5i_handle_rx_cqe(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe) wi =get_frag (rq, ci); cqe_bcnt =be32_to_cpu (cqe->byte_cnt); - skb = rq->wqe.skb_from_cqe (rq, cqe, wi, cqe_bcnt); + skb =INDIRECT_CALL_2 (rq->wqe.skb_from_cqe, + mlx5e_skb_from_cqe_linear, + mlx5e_skb_from_cqe_nonlinear, + rq, cqe, wi, cqe_bcnt);if (!skb) goto wq_free_wqe;
@@ -1469,7 +1478,10 @@ void mlx5e_ipsec_handle_rx_cqe(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe) wi =get_frag (rq, ci); cqe_bcnt =be32_to_cpu (cqe->byte_cnt); - skb = rq->wqe.skb_from_cqe (rq, cqe, wi, cqe_bcnt); + skb =INDIRECT_CALL_2 (rq->wqe.skb_from_cqe, + mlx5e_skb_from_cqe_linear, + mlx5e_skb_from_cqe_nonlinear, + rq, cqe, wi, cqe_bcnt);if (unlikely (!skb)) {/* a DROP, save the page-reuse checks */ mlx5e_free_rx_wqe (rq, wi, true);
Signature · 1 line
2.20.1
Paolo Abeni
maintainerPATCH v2 2/3 indirect call wrappers: add helpers for 3 and 4 ways switch
In reply to Paolo AbeniExperimental results[1] has shown that resorting to several branches and a direct-call is faster than indirect call via retpoline, even when the number of added branches go up 5.
This change adds two additional helpers, to cope with indirect calls with up to 4 available direct call option. We will use them in the next patch.
--- include/linux/indirect_call_wrapper.h | 12 ++++++++++++ 1 file changed, 12 insertions(+)
include/linux/indirect_call_wrapper.h +12 -0
@@ -23,6 +23,16 @@likely (f == f2) ?f2 (__VA_ARGS__) : \INDIRECT_CALL_1 (f, f1, __VA_ARGS__); \ }) +#define INDIRECT_CALL_3 (f, f3, f2, f1, ...) \ + ({ \ + likely(f == f3) ? f3(__VA_ARGS__) : \ + INDIRECT_CALL_2(f, f2, f1, __VA_ARGS__); \ + }) +#define INDIRECT_CALL_4 (f, f4, f3, f2, f1, ...) \ + ({ \ + likely(f == f4) ? f4(__VA_ARGS__) : \ + INDIRECT_CALL_3(f, f3, f2, f1, __VA_ARGS__); \ + })#define INDIRECT_CALLABLE_DECLARE (f) f#define INDIRECT_CALLABLE_SCOPE
@@ -30,6 +40,8 @@#else #define INDIRECT_CALL_1 (f, f1, ...) f(__VA_ARGS__)#define INDIRECT_CALL_2 (f, f2, f1, ...) f(__VA_ARGS__) +#define INDIRECT_CALL_3 (f, f3, f2, f1, ...) f(__VA_ARGS__) +#define INDIRECT_CALL_4 (f, f4, f3, f2, f1, ...) f(__VA_ARGS__)#define INDIRECT_CALLABLE_DECLARE (f)#define INDIRECT_CALLABLE_SCOPE static#endif
Signature · 1 line
2.20.1
Paolo Abeni
maintainerPATCH v2 3/3 net/mlx5e: use indirect calls wrapper for the rx packet handler
In reply to Paolo AbeniWe can avoid another indirect call per packet wrapping the rx handler call with the proper helper.
To ensure that even the last listed direct call experience measurable gain, despite the additional conditionals we must traverse before reaching it, I tested reversing the order of the listed options, with performance differences below noise level.
Together with the previous indirect call patch, this gives ~6% performance improvement in raw UDP tput.
v1 -> v2:
- update the direct call list and use a macro to define it, as per Saeed suggestion. An intermediated additional macro is needed to allow arg list expansion
--- drivers/net/ethernet/mellanox/mlx5/core/en.h | 4 ++++ drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 5 ++++- 2 files changed, 8 insertions(+), 1 deletion(-)
drivers/net/ethernet/mellanox/mlx5/core/en.h +4 -0
@@ -148,6 +148,10 @@ struct page_pool;#define MLX5E_MSG_LEVEL NETIF_MSG_LINK +#define MLX5_RX_INDIRECT_CALL_LIST \ + mlx5e_handle_rx_cqe_mpwrq, mlx5e_handle_rx_cqe, mlx5i_handle_rx_cqe, \ + mlx5e_ipsec_handle_rx_cqe +#define mlx5e_dbg (mlevel, priv, format, ...) \ do { \ if (NETIF_MSG_##mlevel & (priv)->msglevel) \
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +4 -1
@@ -1303,6 +1303,8 @@ void mlx5e_handle_rx_cqe_mpwrq(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe)mlx5_wq_ll_pop (wq, cqe->wqe_id, &wqe->next.next_wqe_index); } +#define INDIRECT_CALL_LIST (f, list, ...) INDIRECT_CALL_4(f, list, __VA_ARGS__) +int mlx5e_poll_rx_cq (struct mlx5e_cq *cq,int budget) { struct mlx5e_rq *rq = container_of(cq, struct mlx5e_rq, cq);
@@ -1333,7 +1335,8 @@ int mlx5e_poll_rx_cq(struct mlx5e_cq *cq, int budget)mlx5_cqwq_pop (cqwq); - rq->handle_rx_cqe (rq, cqe); +INDIRECT_CALL_LIST (rq->handle_rx_cqe, +MLX5_RX_INDIRECT_CALL_LIST , rq, cqe); }while ((++work_done < budget) && (cqe =mlx5_cqwq_get_cqe (cqwq))); out:
Signature · 1 line
2.20.1
Re: [PATCH net-next v2 3/3] net/mlx5e: use indirect calls wrapper for the rx packet handler
Quoted 45 lines · Paolo Abeni
We can avoid another indirect call per packet wrapping the rx handler call with the proper helper.
To ensure that even the last listed direct call experience measurable gain, despite the additional conditionals we must traverse before reaching it, I tested reversing the order of the listed options, with performance differences below noise level.
Together with the previous indirect call patch, this gives ~6% performance improvement in raw UDP tput.
v1 -> v2:
- update the direct call list and use a macro to define it, as per Saeed suggestion. An intermediated additional macro is needed to allow arg list expansionSigned-off-by Paolo Abeni <[email protected]>--- drivers/net/ethernet/mellanox/mlx5/core/en.h | 4 ++++ drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 5 ++++- 2 files changed, 8 insertions(+), 1 deletion(-)drivers/net/ethernet/mellanox/mlx5/core/en.h +4
-0@@ -148,6 +148,10 @@ struct page_pool;#define MLX5E_MSG_LEVEL NETIF_MSG_LINK +#define MLX5_RX_INDIRECT_CALL_LIST \ + mlx5e_handle_rx_cqe_mpwrq, mlx5e_handle_rx_cqe, mlx5i_handle_rx_cqe, \ + mlx5e_ipsec_handle_rx_cqe +#define mlx5e_dbg (mlevel, priv, format, ...) \ do { \drivers/net/ethernet/mellanox/mlx5/core/en.h +0
-0if (NETIF_MSG_##mlevel & (priv)->msglevel) \drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +0
-0
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c void mlx5e_handle_rx_cqe_mpwrq(struct mlx5e_rq · line 1309
Quoted 7 lines
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +2
-0@@ -1303,6 +1303,8 @@ void mlx5e_handle_rx_cqe_mpwrq(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe)mlx5_wq_ll_pop (wq, cqe->wqe_id, &wqe->next.next_wqe_index); } +#define INDIRECT_CALL_LIST (f, list, ...) INDIRECT_CALL_4(f, list, __VA_ARGS__) +
Hi Paolo,
This patch produces some compiler errors:
Please note that mlx5e_ipsec_handle_rx_cqe is only defined when CONFIG_MLX5_EN_IPSEC is enabled.
02:26:53 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c: In function 'mlx5e_poll_rx_cq':
02:26:53 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:1300:42:
error: implicit declaration of function 'INDIRECT_CALL_4'; did you mean 'INDIRECT_CALL_LIST'? [-Werror=implicit-function-declaration] 02:26:53 #define INDIRECT_CALL_LIST(f, list, ...) INDIRECT_CALL_4(f, list, __VA_ARGS__)
02:26:53 ^
02:26:53 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:1332:3: note:
in expansion of macro 'INDIRECT_CALL_LIST'
02:26:53 INDIRECT_CALL_LIST(rq->handle_rx_cqe,
02:26:53 ^~~~~~~~~~~~~~~~~~
02:26:53 drivers/net/ethernet/mellanox/mlx5/core/en.h:153:2: error:
'mlx5e_ipsec_handle_rx_cqe' undeclared (first use in this function); did you mean 'mlx5e_fp_handle_rx_cqe'?
02:26:53 mlx5e_ipsec_handle_rx_cqe
02:26:53 ^
02:26:53 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:1300:61: note:
in definition of macro 'INDIRECT_CALL_LIST'
02:26:53 #define INDIRECT_CALL_LIST(f, list, ...) INDIRECT_CALL_4(f, list, __VA_ARGS__)
02:26:53 ^
~~~
02:26:53 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:1333:8: note:
in expansion of macro 'MLX5_RX_INDIRECT_CALL_LIST'
02:26:53 MLX5_RX_INDIRECT_CALL_LIST, rq, cqe);
02:26:53 ^~~~~~~~~~~~~~~~~~~~~~~~~~
02:26:53 drivers/net/ethernet/mellanox/mlx5/core/en.h:153:2: note: each undeclared identifier is reported only once for each function it appears in
02:26:53 mlx5e_ipsec_handle_rx_cqe
02:26:53 ^
02:26:53 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:1300:61: note:
in definition of macro 'INDIRECT_CALL_LIST'
02:26:53 #define INDIRECT_CALL_LIST(f, list, ...) INDIRECT_CALL_4(f, list, __VA_ARGS__)
02:26:53 ^
~~~
02:26:53 drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:1333:8: note:
in expansion of macro 'MLX5_RX_INDIRECT_CALL_LIST'
02:26:53 MLX5_RX_INDIRECT_CALL_LIST, rq, cqe);
02:26:53 ^~~~~~~~~~~~~~~~~~~~~~~~~~
Quoted 16 lines
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +0
-0int mlx5e_poll_rx_cq (struct mlx5e_cq *cq,int budget){
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +2
-1struct mlx5e_rq *rq = container_of(cq, struct mlx5e_rq, cq);@@ -1333,7 +1335,8 @@ int mlx5e_poll_rx_cq(struct mlx5e_cq *cq, int budget)mlx5_cqwq_pop (cqwq ); - rq->handle_rx_cqe (rq, cqe); +INDIRECT_CALL_LIST (rq->handle_rx_cqe, +MLX5_RX_INDIRECT_CALL_LIST , rq, cqe); } while ((++work_done < budget) && (cqe =
mlx5_cqwq_get_cqe(cqwq)));out:
Paolo Abeni
maintainerRe: [PATCH net-next v2 3/3] net/mlx5e: use indirect calls wrapper for the rx packet handler
Hi,
Quoted 56 lines · Saeed Mahameed
Quoted 45 lines · Paolo Abeni
We can avoid another indirect call per packet wrapping the rx handler call with the proper helper.
To ensure that even the last listed direct call experience measurable gain, despite the additional conditionals we must traverse before reaching it, I tested reversing the order of the listed options, with performance differences below noise level.
Together with the previous indirect call patch, this gives ~6% performance improvement in raw UDP tput.
v1 -> v2:
- update the direct call list and use a macro to define it, as per Saeed suggestion. An intermediated additional macro is needed to allow arg list expansionSigned-off-by Paolo Abeni <[email protected]>--- drivers/net/ethernet/mellanox/mlx5/core/en.h | 4 ++++ drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 5 ++++- 2 files changed, 8 insertions(+), 1 deletion(-)drivers/net/ethernet/mellanox/mlx5/core/en.h +4
-0@@ -148,6 +148,10 @@ struct page_pool;#define MLX5E_MSG_LEVEL NETIF_MSG_LINK +#define MLX5_RX_INDIRECT_CALL_LIST \ + mlx5e_handle_rx_cqe_mpwrq, mlx5e_handle_rx_cqe, mlx5i_handle_rx_cqe, \ + mlx5e_ipsec_handle_rx_cqe +#define mlx5e_dbg (mlevel, priv, format, ...) \ do { \drivers/net/ethernet/mellanox/mlx5/core/en.h +0
-0if (NETIF_MSG_##mlevel & (priv)->msglevel) \drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +0
-0drivers/net/ethernet/mellanox/mlx5/core/en_rx.c void mlx5e_handle_rx_cqe_mpwrq(struct mlx5e_rq · line 1309
Quoted 7 lines
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +2
-0@@ -1303,6 +1303,8 @@ void mlx5e_handle_rx_cqe_mpwrq(struct mlx5e_rq *rq, struct mlx5_cqe64 *cqe)mlx5_wq_ll_pop (wq, cqe->wqe_id, &wqe->next.next_wqe_index); } +#define INDIRECT_CALL_LIST (f, list, ...) INDIRECT_CALL_4(f, list, __VA_ARGS__) +Hi Paolo,
Quoted 4 lines
This patch produces some compiler errors:
Please note that
mlx5e_ipsec_handle_rx_cqeis only defined whenCONFIG_MLX5_EN_IPSECis enabled.
I'm sorry, I dumbly did not fuzz vs mlx5 build options.
It looks like that, to cope with all the possible mixes, a not-so-nice macro maze is required; something alike the following:
#if defined(CONFIG_MLX5_EN_IPSEC) && defined (CONFIG_MLX5_CORE_IPOIB)
#define MLX5_RX_INDIRECT_CALL_LIST \ mlx5e_handle_rx_cqe_mpwrq, mlx5e_handle_rx_cqe, mlx5i_handle_rx_cqe, \ mlx5e_ipsec_handle_rx_cqe
#define INDIRECT_CALL_LIST(f, list, ...) INDIRECT_CALL_4(f, list, __VA_ARGS__)
#elif defined(CONFIG_MLX5_EN_IPSEC)
#define MLX5_RX_INDIRECT_CALL_LIST \ mlx5e_handle_rx_cqe_mpwrq, mlx5e_handle_rx_cqe, \ mlx5e_ipsec_handle_rx_cqe
#define INDIRECT_CALL_LIST(f, list, ...) INDIRECT_CALL_3(f, list, __VA_ARGS__)
#elif defined(CONFIG_MLX5_CORE_IPOIB)
#define MLX5_RX_INDIRECT_CALL_LIST \
mlx5e_handle_rx_cqe_mpwrq, mlx5e_handle_rx_cqe, mlx5i_handle_rx_cqe
#define INDIRECT_CALL_LIST(f, list, ...) INDIRECT_CALL_3(f, list, __VA_ARGS__)
#else
#define MLX5_RX_INDIRECT_CALL_LIST \
mlx5e_handle_rx_cqe_mpwrq, mlx5e_handle_rx_cqe
#define INDIRECT_CALL_LIST(f, list, ...) INDIRECT_CALL_2(f, list, __VA_ARGS__)
#endif
If you are ok with the above, I can include it in v3, otherwise I can either:
* drop patch 2/3 and use only the 2 alternatives (mlx5e_handle_rx_cqe_mpwrq, mlx5e_handle_rx_cqe) that are available regardless of the driver build options
* drop both patches 2/3 and 3/3
Any feedback welcome, thanks!
Paolo
Re: [PATCH net-next v2 3/3] net/mlx5e: use indirect calls wrapper for the rx packet handler
Quoted 106 lines · Paolo Abeni
Hi,
Quoted 60 lines · Saeed Mahameed
Quoted 53 lines · Paolo Abeni
We can avoid another indirect call per packet wrapping the rx handler call with the proper helper.
To ensure that even the last listed direct call experience measurable gain, despite the additional conditionals we must traverse before reaching it, I tested reversing the order of the listed options, with performance differences below noise level.
Together with the previous indirect call patch, this gives ~6% performance improvement in raw UDP tput.
v1 -> v2:
- update the direct call list and use a macro to define it, as per Saeed suggestion. An intermediated additional macro is needed to allow arg list expansionSigned-off-by Paolo Abeni <[email protected]>--- drivers/net/ethernet/mellanox/mlx5/core/en.h | 4 ++++ drivers/net/ethernet/mellanox/mlx5/core/en_rx.c | 5 ++++- 2 files changed, 8 insertions(+), 1 deletion(-)drivers/net/ethernet/mellanox/mlx5/core/en.h +4
-0@@ -148,6 +148,10 @@ struct page_pool;#define MLX5E_MSG_LEVEL NETIF_MSG_LINK +#define MLX5_RX_INDIRECT_CALL_LIST \ + mlx5e_handle_rx_cqe_mpwrq, mlx5e_handle_rx_cqe, mlx5i_handle_rx_cqe, \ + mlx5e_ipsec_handle_rx_cqe +#define mlx5e_dbg (mlevel, priv, format, ...) \do
{ \drivers/net/ethernet/mellanox/mlx5/core/en.h +0
-0if (NETIF_MSG_##mlevel & (priv)->msglevel) \drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +0
-0@@ -1303,6 +1303,8 @@ void mlx5e_handle_rx_cqe_mpwrq(struct
mlx5e_rq
*rq, structmlx5_cqe64*cqe)drivers/net/ethernet/mellanox/mlx5/core/en_rx.c +1
-0mlx5_wq_ll_pop (wq, cqe->wqe_id, &wqe->next.next_wqe_index); } +#define INDIRECT_CALL_LIST (f, list, ...) INDIRECT_CALL_4(f,Quoted 3 lines
list,
__VA_ARGS__)
+Hi Paolo,
Quoted 4 lines
This patch produces some compiler errors:
Please note that
mlx5e_ipsec_handle_rx_cqeis only defined whenCONFIG_MLX5_EN_IPSECis enabled.I'm sorry, I dumbly did not fuzz vs mlx5 build options.
It looks like that, to cope with all the possible mixes, a not-so- nice
macro maze is required; something alike the following:#if
defined(CONFIG_MLX5_EN_IPSEC)&& defined (CONFIG_MLX5_CORE_IPOIB)#define
MLX5_RX_INDIRECT_CALL_LIST\
mlx5e_handle_rx_cqe_mpwrq,mlx5e_handle_rx_cqe,mlx5i_handle_rx_cqe, \
mlx5e_ipsec_handle_rx_cqe
#defineINDIRECT_CALL_LIST(f, list, ...)INDIRECT_CALL_4(f, list, __VA_ARGS__)#elif
defined(CONFIG_MLX5_EN_IPSEC)#define MLX5_RX_INDIRECT_CALL_LIST \ mlx5e_handle_rx_cqe_mpwrq, mlx5e_handle_rx_cqe, \ mlx5e_ipsec_handle_rx_cqe#define
INDIRECT_CALL_LIST(f, list, ...)INDIRECT_CALL_3(f, list, __VA_ARGS__)#elif
defined(CONFIG_MLX5_CORE_IPOIB)#define
MLX5_RX_INDIRECT_CALL_LIST\
mlx5e_handle_rx_cqe_mpwrq,mlx5e_handle_rx_cqe,mlx5i_handle_rx_cqe
#defineINDIRECT_CALL_LIST(f, list, ...)INDIRECT_CALL_3(f, list, __VA_ARGS__)#else
#define
MLX5_RX_INDIRECT_CALL_LIST\
mlx5e_handle_rx_cqe_mpwrq,mlx5e_handle_rx_cqe
#defineINDIRECT_CALL_LIST(f, list, ...)INDIRECT_CALL_2(f, list, __VA_ARGS__)
Quoted 9 lines
#endif
If you are ok with the above, I can include it in v3, otherwise I can either:
* drop patch 2/3 and use only the 2 alternatives (
mlx5e_handle_rx_cqe_mpwrq,mlx5e_handle_rx_cqe) that are available regardless of the driver build options
yea, the above is too much, maybe we can simplify, I will revisit it later, for now, let's have the 2 functions that are always available, after all they are the ones that really matter.
Quoted 6 lines
* drop both patches 2/3 and 3/3
Any feedback welcome, thanks!
Paolo