Skip to contentSkip to conversation

Add Error Disconnect Recover (EDR) support

PATCH Superseded [email protected] 1 participant 9 messages Jul 3, 2019

Subsystems (3)

v4 of 18 Superseded Latest is v18 →

lore
Share & tools
lore
#0 lore raw

v4 cover Add Error Disconnect Recover (EDR) support

From: Kuppuswamy Sathyanarayanan <[email protected]>

This patchset adds support for following features:

1. Error Disconnect Recover (EDR) support.
2. _OSC based negotiation support for DPC.

You can find EDR spec in the following link.

https://members.pcisig.com/wg/PCI-SIG/document/12614

Changes since v1:
* Rebased on top of v5.1-rc1

Changes since v2:
* Split EDR support patch into multiple patches.
* Addressed Bjorn comments.

Changes since v3:
* Moved EDR related ACPI functions/definitions to pci-acpi.c
* Modified commit history in few patches to include spec reference.
* Added support to handle DPC triggered by NON_FATAL errors.
* Added edr_lock to protect PCI device receiving duplicate EDR notifications.
* Addressed Bjorn comments.

Kuppuswamy Sathyanarayanan (8):
PCI/ACPI: Add _OSC based negotiation support for DPC PCI/ACPI: Expose EDR support via _OSC to BIOS
PCI/DPC: Allow dpc_probe() even if firmware first mode is enabled PCI/DPC: Add dpc_process_error() wrapper function PCI/DPC: Add Error Disconnect Recover (EDR) support PCI/AER: Allow clearing Error Status Register in FF mode PCI/DPC: Add support for DPC recovery on NON_FATAL errors PCI/DPC: Clear AER registers in EDR mode

 drivers/acpi/pci_root.c         |   9 ++
 drivers/pci/pci-acpi.c          |  91 +++++++++++++++
 drivers/pci/pcie/Kconfig        |  10 ++
 drivers/pci/pcie/aer.c          |   9 --
 drivers/pci/pcie/dpc.c          | 200 +++++++++++++++++++++++++++++---
 drivers/pci/pcie/portdrv_core.c |   8 +-
 drivers/pci/probe.c             |   1 +
 include/linux/acpi.h            |   4 +-
 include/linux/pci-acpi.h        |  11 ++
 include/linux/pci.h             |   1 +
 10 files changed, 314 insertions(+), 30 deletions(-)
Signature · 1 line
2.21.0
#1 lore raw

PATCH v4 1/8 PCI/ACPI: Add _OSC based negotiation support for DPC

From: Kuppuswamy Sathyanarayanan <[email protected]>

As per PCI firmware specification r3.2 Downstream Port Containment Related Enhancements ECN, sec 4.5.1, table 4-6, OS can use bit 7 of _OSC Control Field to negotiate control over Downstream Port Containment (DPC) configuration of PCIe port.

After _OSC negotiation, firmware will Set this bit to grant OS control over PCIe DPC configuration and Clear it if this feature was requested and denied, or was not requested.

Cc Bjorn Helgaas <[email protected]>
Cc "Rafael J. Wysocki" <[email protected]>
Cc Len Brown <[email protected]>
---
 drivers/acpi/pci_root.c         | 6 ++++++
 drivers/pci/pcie/portdrv_core.c | 3 ++-
 drivers/pci/probe.c             | 1 +
 include/linux/acpi.h            | 3 ++-
 include/linux/pci.h             | 1 +
 5 files changed, 12 insertions(+), 2 deletions(-)
drivers/acpi/pci_root.c +6 -0
index 39f5d172e84f..fa35c2b5b998 100644
@@ -142,6 +142,7 @@ static struct pci_osc_bit_struct pci_osc_control_bit[] = {
 	{ OSC_PCI_EXPRESS_AER_CONTROL, "AER" },
 	{ OSC_PCI_EXPRESS_CAPABILITY_CONTROL, "PCIeCapability" },
 	{ OSC_PCI_EXPRESS_LTR_CONTROL, "LTR" },
+	{ OSC_PCI_EXPRESS_DPC_CONTROL, "DPC" },
 };
 
 static void decode_osc_bits(struct acpi_pci_root *root, char *msg, u32 word,
@@ -488,6 +489,9 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
 			control |= OSC_PCI_EXPRESS_AER_CONTROL;
 	}
 
+	if (IS_ENABLED(CONFIG_PCIE_DPC))
+		control |= OSC_PCI_EXPRESS_DPC_CONTROL;
+
 	requested = control;
 	status = acpi_pci_osc_control_set(handle, &control,
 					  OSC_PCI_EXPRESS_CAPABILITY_CONTROL);
@@ -916,6 +920,8 @@ struct pci_bus *acpi_pci_root_create(struct acpi_pci_root *root,
 		host_bridge->native_pme = 0;
 	if (!(root->osc_control_set & OSC_PCI_EXPRESS_LTR_CONTROL))
 		host_bridge->native_ltr = 0;
+	if (!(root->osc_control_set & OSC_PCI_EXPRESS_DPC_CONTROL))
+		host_bridge->native_dpc = 0;
 
 	pci_scan_child_bus(bus);
 	pci_set_host_bridge_release(host_bridge, acpi_pci_root_release_info,
drivers/pci/pcie/portdrv_core.c +2 -1
index 1b330129089f..0a59ac574be1 100644
@@ -251,7 +251,8 @@ static int get_port_device_capability(struct pci_dev *dev)
 	}
 
 	if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) &&
-	    pci_aer_available() && services & PCIE_PORT_SERVICE_AER)
+	    pci_aer_available() && services & PCIE_PORT_SERVICE_AER &&
+	    (pcie_ports_native || host->native_dpc))
 		services |= PCIE_PORT_SERVICE_DPC;
 
 	if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM ||
drivers/pci/probe.c +1 -0
index 0e8e2c186f50..06b52dd860bb 100644
@@ -601,6 +601,7 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge)
 	bridge->native_shpc_hotplug = 1;
 	bridge->native_pme = 1;
 	bridge->native_ltr = 1;
+	bridge->native_dpc = 1;
 }
 
 struct pci_host_bridge *pci_alloc_host_bridge(size_t priv)
include/linux/acpi.h +2 -1
index d315d86844e4..61ab40bff45c 100644
@@ -514,7 +514,8 @@ extern bool osc_pc_lpi_support_confirmed;
 #define OSC_PCI_EXPRESS_AER_CONTROL		0x00000008
 #define OSC_PCI_EXPRESS_CAPABILITY_CONTROL	0x00000010
 #define OSC_PCI_EXPRESS_LTR_CONTROL		0x00000020
-#define OSC_PCI_CONTROL_MASKS			0x0000003f
+#define OSC_PCI_EXPRESS_DPC_CONTROL		0x00000080
+#define OSC_PCI_CONTROL_MASKS			0x000000ff
 
 #define ACPI_GSB_ACCESS_ATTRIB_QUICK		0x00000002
 #define ACPI_GSB_ACCESS_ATTRIB_SEND_RCV         0x00000004
include/linux/pci.h +1 -0
index dd436da7eccc..de1c82c705a3 100644
@@ -506,6 +506,7 @@ struct pci_host_bridge {
 	unsigned int	native_shpc_hotplug:1;	/* OS may use SHPC hotplug */
 	unsigned int	native_pme:1;		/* OS may use PCIe PME */
 	unsigned int	native_ltr:1;		/* OS may use PCIe LTR */
+	unsigned int	native_dpc:1;		/* OS may use PCIe DPC */
 	/* Resource alignment requirements */
 	resource_size_t (*align_resource)(struct pci_dev *dev,
 			const struct resource *res,
Signature · 1 line
2.21.0
#2 lore raw

PATCH v4 2/8 PCI/ACPI: Expose EDR support via _OSC to BIOS

In reply to [email protected]

From: Kuppuswamy Sathyanarayanan <[email protected]>

As per PCI firmware specification r3.2 Downstream Port Containment Related Enhancements ECN, sec 4.5.1, table 4-4, if OS supports EDR, it should expose its support to BIOS by setting bit 7 of _OSC Support Field.

Cc Bjorn Helgaas <[email protected]>
Cc "Rafael J. Wysocki" <[email protected]>
Cc Len Brown <[email protected]>
---
 drivers/acpi/pci_root.c | 3 +++
 include/linux/acpi.h    | 1 +
 2 files changed, 4 insertions(+)
drivers/acpi/pci_root.c +3 -0
index fa35c2b5b998..361f8b177c6c 100644
@@ -132,6 +132,7 @@ static struct pci_osc_bit_struct pci_osc_support_bit[] = {
 	{ OSC_PCI_CLOCK_PM_SUPPORT, "ClockPM" },
 	{ OSC_PCI_SEGMENT_GROUPS_SUPPORT, "Segments" },
 	{ OSC_PCI_MSI_SUPPORT, "MSI" },
+	{ OSC_PCI_EDR_SUPPORT, "EDR" },
 	{ OSC_PCI_HPX_TYPE_3_SUPPORT, "HPX-Type3" },
 };
 
@@ -442,6 +443,8 @@ static void negotiate_os_control(struct acpi_pci_root *root, int *no_aspm,
 		support |= OSC_PCI_ASPM_SUPPORT | OSC_PCI_CLOCK_PM_SUPPORT;
 	if (pci_msi_enabled())
 		support |= OSC_PCI_MSI_SUPPORT;
+	if (IS_ENABLED(CONFIG_PCIE_EDR))
+		support |= OSC_PCI_EDR_SUPPORT;
 
 	decode_osc_support(root, "OS supports", support);
 	status = acpi_pci_osc_support(root, support);
include/linux/acpi.h +1 -0
index 61ab40bff45c..24ac0435ef3b 100644
@@ -504,6 +504,7 @@ extern bool osc_pc_lpi_support_confirmed;
 #define OSC_PCI_CLOCK_PM_SUPPORT		0x00000004
 #define OSC_PCI_SEGMENT_GROUPS_SUPPORT		0x00000008
 #define OSC_PCI_MSI_SUPPORT			0x00000010
+#define OSC_PCI_EDR_SUPPORT			0x00000080
 #define OSC_PCI_HPX_TYPE_3_SUPPORT		0x00000100
 #define OSC_PCI_SUPPORT_MASKS			0x0000011f
 
Signature · 1 line
2.21.0
#3 lore raw

PATCH v4 3/8 PCI/DPC: Allow dpc_probe() even if firmware first mode is enabled

In reply to [email protected]

From: Kuppuswamy Sathyanarayanan <[email protected]>

As per ACPI specification v6.3, sec 5.6.6, Error Disconnect Recover (EDR) notification used by firmware to let OS know about the DPC event and permit OS to perform error recovery when processing the EDR notification. Also, as per PCI firmware specification r3.2 Downstream Port Containment Related Enhancements ECN, sec 4.5.1, table 4-6, if DPC is controlled by firmware (firmware first mode), it's responsible for initializing Downstream Port Containment Extended Capability Structures per firmware policy. And, OS is permitted to read or write DPC Control and Status registers of a port while processing an Error Disconnect Recover (EDR) notification from firmware on that port.

Currently, if firmware controls DPC (firmware first mode), OS will not create/enumerate DPC PCIe port services. But, if OS supports EDR feature, then as mentioned in above spec references, it should permit enumeration of DPC driver and also support handling ACPI EDR notification. So as first step, allow dpc_probe() to continue even if firmware first mode is enabled. Also add appropriate checks to ensure device registers are not modified outside EDR notification window in firmware first mode. This is a preparatory patch for adding EDR support.

---
 drivers/pci/pcie/dpc.c | 49 +++++++++++++++++++++++++++++++-----------
 1 file changed, 36 insertions(+), 13 deletions(-)
drivers/pci/pcie/dpc.c +36 -13
index a32ec3487a8d..9717fda012f8 100644
@@ -22,6 +22,8 @@ struct dpc_dev {
 	u16			cap_pos;
 	bool			rp_extensions;
 	u8			rp_log_size;
+	/* Set True if DPC is controlled by firmware */
+	bool			firmware_dpc;
 };
 
 static const char * const rp_pio_error_string[] = {
@@ -69,6 +71,9 @@ void pci_save_dpc_state(struct pci_dev *dev)
 	if (!dpc)
 		return;
 
+	if (dpc->firmware_dpc)
+		return;
+
 	save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_DPC);
 	if (!save_state)
 		return;
@@ -90,6 +95,9 @@ void pci_restore_dpc_state(struct pci_dev *dev)
 	if (!dpc)
 		return;
 
+	if (dpc->firmware_dpc)
+		return;
+
 	save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_DPC);
 	if (!save_state)
 		return;
@@ -291,9 +299,6 @@ static int dpc_probe(struct pcie_device *dev)
 	int status;
 	u16 ctl, cap;
 
-	if (pcie_aer_get_firmware_first(pdev))
-		return -ENOTSUPP;
-
 	dpc = devm_kzalloc(device, sizeof(*dpc), GFP_KERNEL);
 	if (!dpc)
 		return -ENOMEM;
@@ -302,13 +307,25 @@ static int dpc_probe(struct pcie_device *dev)
 	dpc->dev = dev;
 	set_service_data(dev, dpc);
 
-	status = devm_request_threaded_irq(device, dev->irq, dpc_irq,
-					   dpc_handler, IRQF_SHARED,
-					   "pcie-dpc", dpc);
-	if (status) {
-		pci_warn(pdev, "request IRQ%d failed: %d\n", dev->irq,
-			 status);
-		return status;
+	if (pcie_aer_get_firmware_first(pdev))
+		dpc->firmware_dpc = 1;
+
+	/*
+	 * If DPC is handled in firmware and ACPI support is not enabled
+	 * in OS, skip probe and return error.
+	 */
+	if (dpc->firmware_dpc && !IS_ENABLED(CONFIG_ACPI))
+		return -ENODEV;
+
+	if (!dpc->firmware_dpc) {
+		status = devm_request_threaded_irq(device, dev->irq, dpc_irq,
+						   dpc_handler, IRQF_SHARED,
+						   "pcie-dpc", dpc);
+		if (status) {
+			pci_warn(pdev, "request IRQ%d failed: %d\n", dev->irq,
+				 status);
+			return status;
+		}
 	}
 
 	pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CAP, &cap);
@@ -323,9 +340,12 @@ static int dpc_probe(struct pcie_device *dev)
 			dpc->rp_log_size = 0;
 		}
 	}
-
-	ctl = (ctl & 0xfff4) | PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN;
-	pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, ctl);
+	if (!dpc->firmware_dpc) {
+		ctl = (ctl & 0xfff4) |
+			(PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN);
+		pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL,
+				      ctl);
+	}
 
 	pci_info(pdev, "error containment capabilities: Int Msg #%d, RPExt%c PoisonedTLP%c SwTrigger%c RP PIO Log %d, DL_ActiveErr%c\n",
 		 cap & PCI_EXP_DPC_IRQ, FLAG(cap, PCI_EXP_DPC_CAP_RP_EXT),
@@ -343,6 +363,9 @@ static void dpc_remove(struct pcie_device *dev)
 	struct pci_dev *pdev = dev->port;
 	u16 ctl;
 
+	if (dpc->firmware_dpc)
+		return;
+
 	pci_read_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, &ctl);
 	ctl &= ~(PCI_EXP_DPC_CTL_EN_FATAL | PCI_EXP_DPC_CTL_INT_EN);
 	pci_write_config_word(pdev, dpc->cap_pos + PCI_EXP_DPC_CTL, ctl);
Signature · 1 line
2.21.0
#4 lore raw

PATCH v4 4/8 PCI/DPC: Add dpc_process_error() wrapper function

In reply to [email protected]

From: Kuppuswamy Sathyanarayanan <[email protected]>

With Error Disconnect Recover (EDR) support, we need to support processing DPC event either from DPC IRQ or ACPI EDR event. So create a wrapper function dpc_process_error() and move common error handling code in to it. It will be used to process the DPC event in both DPC IRQ and EDR ACPI event contexts.

---
 drivers/pci/pcie/dpc.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
drivers/pci/pcie/dpc.c +8 -2
index 9717fda012f8..4137ec7b48cc 100644
@@ -232,10 +232,9 @@ static int dpc_get_aer_uncorrect_severity(struct pci_dev *dev,
 	return 1;
 }
 
-static irqreturn_t dpc_handler(int irq, void *context)
+static void dpc_process_error(struct dpc_dev *dpc)
 {
 	struct aer_err_info info;
-	struct dpc_dev *dpc = context;
 	struct pci_dev *pdev = dpc->dev->port;
 	u16 cap = dpc->cap_pos, status, source, reason, ext_reason;
 
@@ -268,6 +267,13 @@ static irqreturn_t dpc_handler(int irq, void *context)
 
 	/* We configure DPC so it only triggers on ERR_FATAL */
 	pcie_do_recovery(pdev, pci_channel_io_frozen, PCIE_PORT_SERVICE_DPC);
+}
+
+static irqreturn_t dpc_handler(int irq, void *context)
+{
+	struct dpc_dev *dpc = context;
+
+	dpc_process_error(dpc);
 
 	return IRQ_HANDLED;
 }
Signature · 1 line
2.21.0
#5 lore raw

PATCH v4 5/8 PCI/DPC: Add Error Disconnect Recover (EDR) support

In reply to [email protected]

From: Kuppuswamy Sathyanarayanan <[email protected]>

As per ACPI specification r6.3, sec 5.6.6, when firmware owns Downstream Port Containment (DPC), its expected to use the "Error Disconnect Recover" (EDR) notification to alert OSPM of a DPC event and if OS supports EDR, its expected to handle the software state invalidation and port recovery in OS, and also let firmware know the recovery status via _OST ACPI call. Related _OST status codes can be found in ACPI specification r6.3, sec 6.3.5.2.

Also, as per PCI firmware specification r3.2 Downstream Port Containment Related Enhancements ECN, sec 4.5.1, table 4-6, If DPC is controlled by firmware (firmware first mode), firmware is responsible for configuring the DPC and OS is responsible for error recovery. Also, OS is allowed to modify DPC registers only during the EDR notification window. So with EDR support, OS should provide DPC port services even in firmware first mode.

---
 drivers/pci/pci-acpi.c          |  91 +++++++++++++++++++++++
 drivers/pci/pcie/Kconfig        |  10 +++
 drivers/pci/pcie/dpc.c          | 126 +++++++++++++++++++++++++++++++-
 drivers/pci/pcie/portdrv_core.c |   9 ++-
 include/linux/pci-acpi.h        |  11 +++
 5 files changed, 244 insertions(+), 3 deletions(-)
drivers/pci/pci-acpi.c +91 -0
index 1897847ceb0c..7cd889740144 100644
@@ -104,6 +104,97 @@ int acpi_get_rc_resources(struct device *dev, const char *hid, u16 segment,
 }
 #endif
 
+#if defined(CONFIG_PCIE_DPC) && defined(CONFIG_ACPI)
+
+/*
+ * _DSM wrapper function to enable/disable DPC port.
+ * @dpc   : DPC device structure
+ * @enable: status of DPC port (0 or 1).
+ *
+ * returns 0 on success or errno on failure.
+ */
+int acpi_enable_dpc_port(struct pci_dev *pdev, acpi_handle handle, bool enable)
+{
+	union acpi_object *obj;
+	int status = 0;
+	union acpi_object argv4;
+
+	argv4.type = ACPI_TYPE_INTEGER;
+	argv4.integer.value = enable;
+
+	obj = acpi_evaluate_dsm(handle, &pci_acpi_dsm_guid, 1,
+				EDR_PORT_ENABLE_DSM, &argv4);
+	if (!obj)
+		return -EIO;
+
+	if (obj->type != ACPI_TYPE_INTEGER || obj->integer.value != enable)
+		status = -EIO;
+
+	ACPI_FREE(obj);
+
+	return status;
+}
+
+/*
+ * _DSM wrapper function to locate DPC port.
+ * @dpc   : DPC device structure
+ *
+ * returns pci_dev or NULL.
+ */
+struct pci_dev *acpi_locate_dpc_port(struct pci_dev *pdev, acpi_handle handle)
+{
+	union acpi_object *obj;
+	u16 port;
+
+	obj = acpi_evaluate_dsm(handle, &pci_acpi_dsm_guid, 1,
+				EDR_PORT_LOCATE_DSM, NULL);
+	if (!obj)
+		return pci_dev_get(pdev);
+
+	if (obj->type != ACPI_TYPE_INTEGER) {
+		ACPI_FREE(obj);
+		return NULL;
+	}
+
+	/*
+	 * Firmware returns DPC port BDF details in following format:
+	 *	15:8 = bus
+	 *	7:3 = device
+	 *	2:0 = function
+	 */
+	port = obj->integer.value;
+
+	ACPI_FREE(obj);
+
+	return pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus),
+					   PCI_BUS_NUM(port), port & 0xff);
+}
+
+/*
+ * _OST wrapper function to let firmware know the status of EDR event.
+ * @dpc   : DPC device structure.
+ * @status: Status of EDR event.
+ */
+int acpi_send_edr_status(struct pci_dev *pdev,  acpi_handle handle, u16 status)
+{
+	u32 ost_status;
+
+	pci_dbg(pdev, "Sending EDR status :%x\n", status);
+
+	ost_status =  PCI_DEVID(pdev->bus->number, pdev->devfn);
+	ost_status = (ost_status << 16) | status;
+
+	status = acpi_evaluate_ost(handle,
+				   ACPI_NOTIFY_DISCONNECT_RECOVER,
+				   ost_status, NULL);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+
+	return 0;
+}
+
+#endif /* CONFIG_PCIE_DPC && CONFIG_ACPI */
+
 phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle)
 {
 	acpi_status status = AE_NOT_EXIST;
drivers/pci/pcie/Kconfig +10 -0
index 362eb8cfa53b..9a05015af7cd 100644
@@ -150,3 +150,13 @@ config PCIE_BW
 	  This enables PCI Express Bandwidth Change Notification.  If
 	  you know link width or rate changes occur only to correct
 	  unreliable links, you may answer Y.
+
+config PCIE_EDR
+	bool "PCI Express Error Disconnect Recover support"
+	default n
+	depends on PCIE_DPC && ACPI
+	help
+	  This options adds Error Disconnect Recover support as specified
+	  in PCI firmware specification v3.2 Downstream Port Containment
+	  Related Enhancements ECN. Enable this if you want to support hybrid
+	  DPC model which uses both firmware and OS to implement DPC.
drivers/pci/pcie/dpc.c +125 -1

174 lines not on this page · raw message

drivers/pci/pcie/portdrv_core.c +7 -2
index 0a59ac574be1..1b54a39df795 100644
@@ -250,9 +250,14 @@ static int get_port_device_capability(struct pci_dev *dev)
 		pcie_pme_interrupt_enable(dev, false);
 	}
 
+	/*
+	 * If EDR support is enabled in OS, then even if AER is not handled in
+	 * OS, DPC service can be enabled.
+	 */
 	if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_DPC) &&
-	    pci_aer_available() && services & PCIE_PORT_SERVICE_AER &&
-	    (pcie_ports_native || host->native_dpc))
+	    ((IS_ENABLED(CONFIG_PCIE_EDR) && !host->native_dpc) ||
+	    (pci_aer_available() && services & PCIE_PORT_SERVICE_AER &&
+	    (pcie_ports_native || host->native_dpc))))
 		services |= PCIE_PORT_SERVICE_DPC;
 
 	if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM ||
include/linux/pci-acpi.h +11 -0
index 8082b612f561..98ab407968fa 100644
@@ -116,6 +116,17 @@ static inline void acpi_pci_add_bus(struct pci_bus *bus) { }
 static inline void acpi_pci_remove_bus(struct pci_bus *bus) { }
 #endif	/* CONFIG_ACPI */
 
+#if defined(CONFIG_PCIE_DPC) && defined(CONFIG_ACPI)
+#define EDR_PORT_ENABLE_DSM     0x0C
+#define EDR_PORT_LOCATE_DSM     0x0D
+int acpi_enable_dpc_port(struct pci_dev *pdev, acpi_handle handle,
+			 bool enable);
+struct pci_dev *acpi_locate_dpc_port(struct pci_dev *pdev,
+				     acpi_handle handle);
+int acpi_send_edr_status(struct pci_dev *pdev,
+			 acpi_handle handle, u16 status);
+#endif
+
 #ifdef CONFIG_ACPI_APEI
 extern bool aer_acpi_firmware_first(void);
 #else
Signature · 1 line
2.21.0
#6 lore raw

PATCH v4 6/8 PCI/AER: Allow clearing Error Status Register in FF mode

In reply to [email protected]

From: Kuppuswamy Sathyanarayanan <[email protected]>

As per PCI firmware specification r3.2 Downstream Port Containment Related Enhancements ECN, sec 4.5.1, table 4-6, Error Disconnect Recover (EDR) support allows OS to handle error recovery and clearing Error Registers even in FF mode. So remove FF mode checks in pci_cleanup_aer_uncorrect_error_status(), pci_aer_clear_fatal_status() and pci_cleanup_aer_error_status_regs() functions.

---
 drivers/pci/pcie/aer.c | 9 ---------
 1 file changed, 9 deletions(-)
drivers/pci/pcie/aer.c +0 -9
index b45bc47d04fe..ae5eed084ae5 100644
@@ -383,9 +383,6 @@ int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
 	if (!pos)
 		return -EIO;
 
-	if (pcie_aer_get_firmware_first(dev))
-		return -EIO;
-
 	/* Clear status bits for ERR_NONFATAL errors only */
 	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
 	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &sev);
@@ -406,9 +403,6 @@ void pci_aer_clear_fatal_status(struct pci_dev *dev)
 	if (!pos)
 		return;
 
-	if (pcie_aer_get_firmware_first(dev))
-		return;
-
 	/* Clear status bits for ERR_FATAL errors only */
 	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
 	pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &sev);
@@ -430,9 +424,6 @@ int pci_cleanup_aer_error_status_regs(struct pci_dev *dev)
 	if (!pos)
 		return -EIO;
 
-	if (pcie_aer_get_firmware_first(dev))
-		return -EIO;
-
 	port_type = pci_pcie_type(dev);
 	if (port_type == PCI_EXP_TYPE_ROOT_PORT) {
 		pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &status);
Signature · 1 line
2.21.0
#7 lore raw

PATCH v4 7/8 PCI/DPC: Add support for DPC recovery on NON_FATAL errors

In reply to [email protected]

From: Kuppuswamy Sathyanarayanan <[email protected]>

Currently, in native mode, DPC driver is configured to trigger DPC only for FATAL errors and hence it only supports port recovery for FATAL errors. But with Error Disconnect Recover (EDR) support, DPC configuration is done by firmware, and hence we should expect DPC triggered for both FATAL/NON-FATAL errors. So add support for DPC recovery with NON-FATAL errors.

---
 drivers/pci/pcie/dpc.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/pci/pcie/dpc.c +8 -3
index 214fa623228e..34f4e6ca24df 100644
@@ -267,15 +267,20 @@ static void dpc_process_error(struct dpc_dev *dpc)
 	/* show RP PIO error detail information */
 	if (dpc->rp_extensions && reason == 3 && ext_reason == 0)
 		dpc_process_rp_pio_error(dpc);
-	else if (reason == 0 &&
+	else if (reason <= 2 &&
 		 dpc_get_aer_uncorrect_severity(pdev, &info) &&
 		 aer_get_device_error_info(pdev, &info)) {
 		aer_print_error(pdev, &info);
 		pci_cleanup_aer_uncorrect_error_status(pdev);
-		pci_aer_clear_fatal_status(pdev);
+		if (reason != 1)
+			pci_aer_clear_fatal_status(pdev);
 	}
 
-	/* We configure DPC so it only triggers on ERR_FATAL */
+	/*
+	 * Irrespective of whether the DPC event is triggered by
+	 * ERR_FATAL or ERR_NONFATAL, since the link is already down,
+	 * use the FATAL error recovery path for both cases.
+	 */
 	pcie_do_recovery(pdev, pci_channel_io_frozen, PCIE_PORT_SERVICE_DPC);
 }
 
Signature · 1 line
2.21.0
#8 lore raw

PATCH v4 8/8 PCI/DPC: Clear AER registers in EDR mode

In reply to [email protected]

From: Kuppuswamy Sathyanarayanan <[email protected]>

As per PCI firmware specification r3.2 Downstream Port Containment Related Enhancements ECN, OS is responsible for clearing the AER registers in EDR mode. So clear AER registers in dpc_process_error() function.

---
 drivers/pci/pcie/dpc.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/pci/pcie/dpc.c +4 -0
index 34f4e6ca24df..a04a76d1efe0 100644
@@ -276,6 +276,10 @@ static void dpc_process_error(struct dpc_dev *dpc)
 			pci_aer_clear_fatal_status(pdev);
 	}
 
+	/* In EDR mode, OS is responsible for clearing AER registers */
+	if (dpc->firmware_dpc)
+		pci_cleanup_aer_error_status_regs(pdev);
+
 	/*
 	 * Irrespective of whether the DPC event is triggered by
 	 * ERR_FATAL or ERR_NONFATAL, since the link is already down,
Signature · 1 line
2.21.0