Skip to contentSkip to conversation

xilinx: Add some example scripts for bootmodes

PATCH New Michal Simek 2 participants 5 messages Sep 11, 2019 – Oct 8, 2019 Arm/Zynq architecture

lore
Share & tools
lore
#0 lore raw

cover xilinx: Add some example scripts for bootmodes

Hi,

mostly yocto guys asked us to provide default scripts for supporting distribution boot mode which is done by these 2 patches.

Thanks,
Michal

Siva Durga Prasad Paladugu (2):
xilinx: Add qspi boot command script for reference
xilinx: Add sd boot command script for reference

 board/xilinx/bootscripts/qspiboot.cmd | 10 ++++++++++
 board/xilinx/bootscripts/sdboot.cmd   | 10 ++++++++++
 2 files changed, 20 insertions(+)
 create mode 100644 board/xilinx/bootscripts/qspiboot.cmd
 create mode 100644 board/xilinx/bootscripts/sdboot.cmd
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/2 xilinx: Add qspi boot command script for reference

From: Siva Durga Prasad Paladugu <[email protected]>

Thsi patch adds qspiboot command script for reference. This can be converetd into uboot script using mkimage and use for booting.

---

 board/xilinx/bootscripts/qspiboot.cmd | 10 ++++++++++
 1 file changed, 10 insertions(+)
 create mode 100644 board/xilinx/bootscripts/qspiboot.cmd
board/xilinx/bootscripts/qspiboot.cmd new file +10 -0
new file mode 100644
index 000000000000..c10341c4d6ea
@@ -0,0 +1,10 @@
+# This is an example file to generate boot.scr - a boot script for U-Boot
+# This example only target for qspi boot, sameway it can be created for boot
+# devices like nand.
+# Generate boot.scr:
+# ./tools/mkimage -c none -A arm -T script -d qspiboot.cmd boot.scr
+#
+# It requires a list of environment variables to be defined before load:
+# fdt_addr, fdt_offset, fdt_size, kernel_addr, kernel_offset, kernel_size
+#
+sf probe 0 0 0 && sf read $fdt_addr $fdt_offset $fdt_size && sf read $kernel_addr $kernel_offset $kernel_size && booti $kernel_addr - $fdt_addr
Signature · 1 line
2.17.1
Applied
#2 lore raw

PATCH 1/2 xilinx: Add qspi boot command script for reference

Hi,

st 11. 9. 2019 v 9:03 odesílatel Michal Simek <[email protected]> napsal:

Quoted 32 lines

From: Siva Durga Prasad Paladugu <[email protected]>

Thsi patch adds qspiboot command script for reference. This can be converetd into uboot script using mkimage and use for booting.

---

 board/xilinx/bootscripts/qspiboot.cmd | 10 ++++++++++
 1 file changed, 10 insertions(+)
 create mode 100644 board/xilinx/bootscripts/qspiboot.cmd
board/xilinx/bootscripts/qspiboot.cmd new file +10 -1
new file mode 100644
index 000000000000..c10341c4d6ea
@@ -0,0 +1,10 @@
+# This is an example file to generate boot.scr - a boot script for U-Boot
+# This example only target for qspi boot, sameway it can be created for boot
+# devices like nand.
+# Generate boot.scr:
+# ./tools/mkimage -c none -A arm -T script -d qspiboot.cmd boot.scr
+#
+# It requires a list of environment variables to be defined before load:
+# fdt_addr, fdt_offset, fdt_size, kernel_addr, kernel_offset, kernel_size
+#
+sf probe 0 0 0 && sf read $fdt_addr $fdt_offset $fdt_size && sf read $kernel_addr $kernel_offset $kernel_size && booti $kernel_addr - $fdt_addr
--
Quoted 2 lines

2.17.1

Applied.
M

Signature · 5 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
#3 lore raw

PATCH 2/2 xilinx: Add sd boot command script for reference

In reply to Michal Simek

From: Siva Durga Prasad Paladugu <[email protected]>

This patch adds sdboot command script for reference. This can be converetd into uboot script using mkimage and use for booting.

---

 board/xilinx/bootscripts/sdboot.cmd | 10 ++++++++++
 1 file changed, 10 insertions(+)
 create mode 100644 board/xilinx/bootscripts/sdboot.cmd
board/xilinx/bootscripts/sdboot.cmd new file +10 -0
new file mode 100644
index 000000000000..54667d7dca00
@@ -0,0 +1,10 @@
+# This is an example file to generate boot.scr - a boot script for U-Boot
+# This example only target for qspi boot, sameway it can be created for boot
+# devices like nand.
+# Generate boot.scr:
+# ./tools/mkimage -c none -A arm -T script -d sdboot.cmd boot.scr
+#
+# It requires a list of environment variables used below to be defined
+# before load
+#
+mmc dev $sdbootdev && mmcinfo && run uenvboot || run sdroot$sdbootdev;load mmc $sdbootdev:$partid $fdt_addr system.dtb && load mmc $sdbootdev:$partid $kernel_addr Image && booti $kernel_addr - $fdt_addr
Signature · 1 line
2.17.1
#4 lore raw

PATCH 2/2 xilinx: Add sd boot command script for reference

Hi,

st 11. 9. 2019 v 9:03 odesílatel Michal Simek <[email protected]> napsal:

Quoted 32 lines

From: Siva Durga Prasad Paladugu <[email protected]>

This patch adds sdboot command script for reference. This can be converetd into uboot script using mkimage and use for booting.

---

 board/xilinx/bootscripts/sdboot.cmd | 10 ++++++++++
 1 file changed, 10 insertions(+)
 create mode 100644 board/xilinx/bootscripts/sdboot.cmd
board/xilinx/bootscripts/sdboot.cmd new file +10 -1
new file mode 100644
index 000000000000..54667d7dca00
@@ -0,0 +1,10 @@
+# This is an example file to generate boot.scr - a boot script for U-Boot
+# This example only target for qspi boot, sameway it can be created for boot
+# devices like nand.
+# Generate boot.scr:
+# ./tools/mkimage -c none -A arm -T script -d sdboot.cmd boot.scr
+#
+# It requires a list of environment variables used below to be defined
+# before load
+#
+mmc dev $sdbootdev && mmcinfo && run uenvboot || run sdroot$sdbootdev;load mmc $sdbootdev:$partid $fdt_addr system.dtb && load mmc $sdbootdev:$partid $kernel_addr Image && booti $kernel_addr - $fdt_addr
--
Quoted 2 lines

2.17.1

Applied but with using devnum instead of sdbootdev.

Thanks,
Michal

Signature · 5 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs