xilinx: Add some example scripts for bootmodes
cover xilinx: Add some example scripts for bootmodes
Hi,
mostly yocto guys asked us to provide default scripts for supporting distribution boot mode which is done by these 2 patches.
Thanks,
Michal
Siva Durga Prasad Paladugu (2):
xilinx: Add qspi boot command script for reference
xilinx: Add sd boot command script for reference
board/xilinx/bootscripts/qspiboot.cmd | 10 ++++++++++ board/xilinx/bootscripts/sdboot.cmd | 10 ++++++++++ 2 files changed, 20 insertions(+) create mode 100644 board/xilinx/bootscripts/qspiboot.cmd create mode 100644 board/xilinx/bootscripts/sdboot.cmd
Signature · 1 line
2.17.1
PATCH 1/2 xilinx: Add qspi boot command script for reference
From: Siva Durga Prasad Paladugu <[email protected]>
Thsi patch adds qspiboot command script for reference. This can be converetd into uboot script using mkimage and use for booting.
---
board/xilinx/bootscripts/qspiboot.cmd | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 board/xilinx/bootscripts/qspiboot.cmd
board/xilinx/bootscripts/qspiboot.cmd new file +10 -0
@@ -0,0 +1,10 @@ +# This is an example file to generate boot.scr - a boot script for U-Boot +# This example only target for qspi boot, sameway it can be created for boot +# devices like nand. +# Generate boot.scr: +# ./tools/mkimage -c none -A arm -T script -d qspiboot.cmd boot.scr +# +# It requires a list of environment variables to be defined before load: +# fdt_addr, fdt_offset, fdt_size, kernel_addr, kernel_offset, kernel_size +# +sf probe 0 0 0 && sf read $fdt_addr $fdt_offset $fdt_size && sf read $kernel_addr $kernel_offset $kernel_size && booti $kernel_addr - $fdt_addr
Signature · 1 line
2.17.1
PATCH 2/2 xilinx: Add sd boot command script for reference
In reply to Michal SimekFrom: Siva Durga Prasad Paladugu <[email protected]>
This patch adds sdboot command script for reference. This can be converetd into uboot script using mkimage and use for booting.
---
board/xilinx/bootscripts/sdboot.cmd | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 board/xilinx/bootscripts/sdboot.cmd
board/xilinx/bootscripts/sdboot.cmd new file +10 -0
@@ -0,0 +1,10 @@ +# This is an example file to generate boot.scr - a boot script for U-Boot +# This example only target for qspi boot, sameway it can be created for boot +# devices like nand. +# Generate boot.scr: +# ./tools/mkimage -c none -A arm -T script -d sdboot.cmd boot.scr +# +# It requires a list of environment variables used below to be defined +# before load +# +mmc dev $sdbootdev && mmcinfo && run uenvboot || run sdroot$sdbootdev;load mmc $sdbootdev:$partid $fdt_addr system.dtb && load mmc $sdbootdev:$partid $kernel_addr Image && booti $kernel_addr - $fdt_addr
Signature · 1 line
2.17.1
Michal Simek
AppliedPATCH 1/2 xilinx: Add qspi boot command script for reference
In reply to Michal SimekHi,
st 11. 9. 2019 v 9:03 odesÃlatel Michal Simek <[email protected]> napsal:
Quoted 32 lines
From: Siva Durga Prasad Paladugu <[email protected]>
Thsi patch adds qspiboot command script for reference. This can be converetd into uboot script using mkimage and use for booting.
Signed-off-by Siva Durga Prasad Paladugu <[email protected]>Signed-off-by Michal Simek <[email protected]>---
board/xilinx/bootscripts/qspiboot.cmd | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 board/xilinx/bootscripts/qspiboot.cmdboard/xilinx/bootscripts/qspiboot.cmd new file +10
-1@@ -0,0 +1,10 @@ +# This is an example file to generate boot.scr - a boot script for U-Boot +# This example only target for qspi boot, sameway it can be created for boot +# devices like nand. +# Generate boot.scr: +# ./tools/mkimage -c none -A arm -T script -d qspiboot.cmd boot.scr +# +# It requires a list of environment variables to be defined before load: +# fdt_addr, fdt_offset, fdt_size, kernel_addr, kernel_offset, kernel_size +# +sf probe 0 0 0 && sf read $fdt_addr $fdt_offset $fdt_size && sf read $kernel_addr $kernel_offset $kernel_size && booti $kernel_addr - $fdt_addr --
Quoted 2 lines
2.17.1
Applied.
M
Signature · 5 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
PATCH 2/2 xilinx: Add sd boot command script for reference
In reply to Michal SimekHi,
st 11. 9. 2019 v 9:03 odesÃlatel Michal Simek <[email protected]> napsal:
Quoted 32 lines
From: Siva Durga Prasad Paladugu <[email protected]>
This patch adds sdboot command script for reference. This can be converetd into uboot script using mkimage and use for booting.
Signed-off-by Siva Durga Prasad Paladugu <[email protected]>Signed-off-by Michal Simek <[email protected]>---
board/xilinx/bootscripts/sdboot.cmd | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 board/xilinx/bootscripts/sdboot.cmdboard/xilinx/bootscripts/sdboot.cmd new file +10
-1@@ -0,0 +1,10 @@ +# This is an example file to generate boot.scr - a boot script for U-Boot +# This example only target for qspi boot, sameway it can be created for boot +# devices like nand. +# Generate boot.scr: +# ./tools/mkimage -c none -A arm -T script -d sdboot.cmd boot.scr +# +# It requires a list of environment variables used below to be defined +# before load +# +mmc dev $sdbootdev && mmcinfo && run uenvboot || run sdroot$sdbootdev;load mmc $sdbootdev:$partid $fdt_addr system.dtb && load mmc $sdbootdev:$partid $kernel_addr Image && booti $kernel_addr - $fdt_addr --
Quoted 2 lines
2.17.1
Applied but with using devnum instead of sdbootdev.
Thanks,
Michal
Signature · 5 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs