MIPS: CI20: DTS: Add nodes to Creator CI20 board
Subsystems (3)
cover MIPS: CI20: DTS: Add nodes to Creator CI20 board
Attemping to make my CI20 more usefull than a paperweight, I add nodes to Devicetree, at this time:
- The IW8103 need some work to stay alive because power seem to turn off.
- The leds patch lack of correct option in ci20_defconfig.
- The Cpu patch isn't usefull without SMP support of jz4780.
Alexandre GRIVEAUX (4):
MIPS: CI20: DTS: Add I2C nodes
MIPS: CI20: DTS: Add IW8103 Wifi + bluetooth
MIPS: CI20: DTS: Add Leds
MIPS: JZ4780: DTS: Add CPU nodes
arch/mips/boot/dts/ingenic/ci20.dts | 214 +++++++++++++++++++++++++ arch/mips/boot/dts/ingenic/jz4780.dtsi | 17 ++ 2 files changed, 231 insertions(+)
base-commit: 4c37310a2e605357cf47b3d357696309f1181b5c
Signature · 1 line
2.20.1
PATCH 1/4 MIPS: CI20: DTS: Add I2C nodes
Adding missing I2C nodes and some peripheral:
- PMU
- RTC
--- arch/mips/boot/dts/ingenic/ci20.dts | 147 ++++++++++++++++++++++++++++ 1 file changed, 147 insertions(+)
arch/mips/boot/dts/ingenic/ci20.dts +147 -0
@@ -87,6 +87,123 @@ pinctrl-0 = <&pins_uart4>; }; +&i2c0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c0>; + + clock-frequency = <400000>; + + act8600: act8600@5a { + compatible = "active-semi,act8600"; + reg = <0x5a>; + status = "okay"; + + regulators { + vddcore: SUDCDC1 { + regulator-name = "VDDCORE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + vddmem: SUDCDC2 { + regulator-name = "VDDMEM"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + vcc_33: SUDCDC3 { + regulator-name = "VCC33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vcc_50: SUDCDC4 { + regulator-name = "VCC50"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + vcc_25: LDO_REG5 { + regulator-name = "VCC25"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + wifi_io: LDO_REG6 { + regulator-name = "WIFIIO"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + vcc_28: LDO_REG7 { + regulator-name = "VCC28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + vcc_15: LDO_REG8 { + regulator-name = "VCC15"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + vcc_18: LDO_REG9 { + regulator-name = "VCC18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vcc_11: LDO_REG10 { + regulator-name = "VCC11"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c1>; + +}; + +&i2c2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c2>; + +}; + +&i2c3 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c3>; + +}; + +&i2c4 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_i2c4>; + + clock-frequency = <400000>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + interrupts = <110>; + }; +}; + &nemc { status = "okay";
@@ -209,6 +326,36 @@ bias-disable; }; + pins_i2c0: i2c0 { + function = "i2c0"; + groups = "i2c0-data"; + bias-disable; + }; + + pins_i2c1: i2c1 { + function = "i2c1"; + groups = "i2c1-data"; + bias-disable; + }; + + pins_i2c2: i2c2 { + function = "i2c2"; + groups = "i2c2-data"; + bias-disable; + }; + + pins_i2c3: i2c3 { + function = "i2c3"; + groups = "i2c3-data"; + bias-disable; + }; + + pins_i2c4: i2c4 { + function = "i2c4"; + groups = "i2c4-data-e"; + bias-disable; + }; + pins_nemc: nemc { function = "nemc"; groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe";
Signature · 1 line
2.20.1
kbuild test robot
build botRe: [PATCH 1/4] MIPS: CI20: DTS: Add I2C nodes
Thank you for the patch! Yet something to improve:
Hi Alexandre,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on linus/master]
[cannot apply to v5.3 next-20190920]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
url: https://github.com/0day-ci/linux/commits/Alexandre-GRIVEAUX/MIPS-CI20-DTS-Add-nodes-to-Creator-CI20-board/20190923-041656
config: mips-allmodconfig (attached as .config)
compiler: mips-linux-gcc (GCC) 7.4.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=7.4.0 make.cross ARCH=mips
If you fix the issue, kindly add following tag
All errors (new ones prefixed by >>):
>> Error: arch/mips/boot/dts/ingenic/ci20.dts:90.1-6 Label or path i2c0 not found >> Error: arch/mips/boot/dts/ingenic/ci20.dts:168.1-6 Label or path i2c1 not found >> Error: arch/mips/boot/dts/ingenic/ci20.dts:176.1-6 Label or path i2c2 not found >> Error: arch/mips/boot/dts/ingenic/ci20.dts:184.1-6 Label or path i2c3 not found >> Error: arch/mips/boot/dts/ingenic/ci20.dts:192.1-6 Label or path i2c4 not found
FATAL ERROR: Syntax error parsing input tree
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
Re: [PATCH 1/4] MIPS: CI20: DTS: Add I2C nodes
Hello,
Quoted 29 lines
Hi Alexandre,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on linus/master]
[cannot apply to v5.3 next-20190920]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]url: https://github.com/0day-ci/linux/commits/Alexandre-GRIVEAUX/MIPS-CI20-DTS-Add-nodes-to-Creator-CI20-board/20190923-041656
config: mips-allmodconfig (attached as .config)
compiler: mips-linux-gcc (GCC) 7.4.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=7.4.0 make.cross ARCH=mipsIf you fix the issue, kindly add following tag
Reported-by kbuild test robot <[email protected]>All errors (new ones prefixed by >>):
Quoted 5 lines
Quoted 5 lines
Error: arch/mips/boot/dts/ingenic/ci20.dts:90.1-6 Label or path i2c0 not found
Error: arch/mips/boot/dts/ingenic/ci20.dts:168.1-6 Label or path i2c1 not found
Error: arch/mips/boot/dts/ingenic/ci20.dts:176.1-6 Label or path i2c2 not found
Error: arch/mips/boot/dts/ingenic/ci20.dts:184.1-6 Label or path i2c3 not found
Error: arch/mips/boot/dts/ingenic/ci20.dts:192.1-6 Label or path i2c4 not found
Quoted 5 lines
FATAL ERROR: Syntax error parsing input tree
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
Do I need to add the patch "[PATCHv4] MIPS: JZ4780: DTS: Add I2C nodes" to the begin of this patchset ?
Thanks.
MIPS SGI IP30
In reply to kbuild test robothi guys
any news about the kernel?
I still have a lot of trouble with the PCI.
Carlo
PATCH 2/4 MIPS: CI20: DTS: Add IW8103 Wifi + bluetooth
In reply to Alexandre GRIVEAUXAdd IW8103 Wifi + bluetooth module to device tree and related power domain.
--- arch/mips/boot/dts/ingenic/ci20.dts | 39 +++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)
arch/mips/boot/dts/ingenic/ci20.dts +39 -0
@@ -31,6 +31,13 @@ gpio = <&gpb 25 GPIO_ACTIVE_LOW>; enable-active-high; }; + + wlan0_power: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "wlan0_power"; + gpio = <&gpb 19 GPIO_ACTIVE_LOW>; + enable-active-high; + }; }; &ext {
@@ -54,9 +61,18 @@ bus-width = <4>; max-frequency = <50000000>; + non-removable; pinctrl-names = "default"; pinctrl-0 = <&pins_mmc1>; + + brcmf: wifi@1 { +/* reg = <4>;*/ + compatible = "brcm,bcm4330-fmac"; + vcc-supply = <&wlan0_power>; + device-wakeup-gpios = <&gpd 9 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpf 7 GPIO_ACTIVE_LOW>; + }; }; &uart0 {
@@ -73,6 +89,23 @@ pinctrl-0 = <&pins_uart1>; }; +&uart2 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart2>; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm4330-bt"; + reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>; + vcc-supply = <&wlan0_power>; + device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>; + }; +}; + &uart3 { status = "okay";
@@ -314,6 +347,12 @@ bias-disable; }; + pins_uart2: uart2 { + function = "uart2"; + groups = "uart2-data", "uart2-hwflow"; + bias-disable; + }; + pins_uart3: uart3 { function = "uart3"; groups = "uart3-data", "uart3-hwflow";
Signature · 1 line
2.20.1
PATCH 3/4 MIPS: CI20: DTS: Add Leds
In reply to Alexandre GRIVEAUXAdding leds and related triggers.
--- arch/mips/boot/dts/ingenic/ci20.dts | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
arch/mips/boot/dts/ingenic/ci20.dts +28 -0
@@ -25,6 +25,34 @@ 0x30000000 0x30000000>; }; + leds { + compatible = "gpio-leds"; + + led0 { + label = "ci20:red:led0"; + gpios = <&gpc 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + + led1 { + label = "ci20:red:led1"; + gpios = <&gpc 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "nand-disk"; + }; + + led2 { + label = "ci20:red:led2"; + gpios = <&gpc 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu1"; + }; + + led3 { + label = "ci20:red:led3"; + gpios = <&gpc 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + }; + }; + eth0_power: fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "eth0_power";
Signature · 1 line
2.20.1
PATCH 4/4 MIPS: JZ4780: DTS: Add CPU nodes
In reply to Alexandre GRIVEAUXThe JZ4780 have 2 core, adding to DT.
--- arch/mips/boot/dts/ingenic/jz4780.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
arch/mips/boot/dts/ingenic/jz4780.dtsi +17 -0
@@ -7,6 +7,23 @@ #size-cells = <1>; compatible = "ingenic,jz4780"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "ingenic,jz4780"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "ingenic,jz4780"; + device_type = "cpu"; + reg = <1>; + }; + }; + cpuintc: interrupt-controller { #address-cells = <0>; #interrupt-cells = <1>;
Signature · 1 line
2.20.1