Add initial support for slimport anx7625
Subsystems (4)
v5 cover Add initial support for slimport anx7625
Hi all,
The following series add initial support for the Slimport ANX7625 transmitter, a ultra-low power Full-HD 4K MIPI to DP transmitter designed for portable device.
This is the initial version, any mistakes, please let me know, I will fix it in the next series.
Thanks,
Xin
Xin Ji (2):
dt-bindings: drm/bridge: anx7625: MIPI to DP transmitter binding drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP bridge driver
.../bindings/display/bridge/anx7625.yaml | 91 + drivers/gpu/drm/bridge/Makefile | 2 +- drivers/gpu/drm/bridge/analogix/Kconfig | 6 + drivers/gpu/drm/bridge/analogix/Makefile | 1 + drivers/gpu/drm/bridge/analogix/anx7625.c | 2044 ++++++++++++++++++++ drivers/gpu/drm/bridge/analogix/anx7625.h | 406 ++++ 6 files changed, 2549 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/display/bridge/anx7625.yaml create mode 100644 drivers/gpu/drm/bridge/analogix/anx7625.c create mode 100644 drivers/gpu/drm/bridge/analogix/anx7625.h
Signature · 1 line
2.7.4
PATCH v5 1/2 dt-bindings: drm/bridge: anx7625: MIPI to DP transmitter binding
The ANX7625 is an ultra-low power 4K Mobile HD Transmitter designed for portable device. It converts MIPI to DisplayPort 1.3 4K.
You can add support to your board with binding.
Example:
anx7625_bridge: encoder@58 {
compatible = "analogix,anx7625";
reg = <0x58>;
status = "okay";
panel-flags = <1>;
enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
anx_1_in: endpoint {
remote-endpoint = <&mipi_dsi>;
};
};
port@2 {
reg = <2>;
anx_1_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};Signed-off-by Xin Ji <[email protected]>
--- .../bindings/display/bridge/anx7625.yaml | 91 ++++++++++++++++++++++ 1 file changed, 91 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/anx7625.yaml
Documentation/devicetree/bindings/display/bridge/anx7625.yaml new file +91 -0
@@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 Analogix Semiconductor, Inc. +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/display/bridge/anx7625.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Analogix ANX7625 SlimPort (4K Mobile HD Transmitter) + +maintainers: + - Xin Ji <[email protected]> + +description: | + The ANX7625 is an ultra-low power 4K Mobile HD Transmitter + designed for portable devices. + +properties: + "#address-cells": true + "#size-cells": true + + compatible: + items: + - const: analogix,anx7625 + + reg: + maxItems: 1 + + panel-flags: + description: indicate the panel is internal or external. + maxItems: 1 + + interrupts: + maxItems: 1 + + enable-gpios: + description: used for power on chip control, POWER_EN pin D2. + maxItems: 1 + + reset-gpios: + description: used for reset chip control, RESET_N pin B7. + maxItems: 1 + + port@0: + type: object + description: + A port node pointing to MIPI DSI host port node. + + port@1: + type: object + description: + A port node pointing to MIPI DPI host port node. + + port@2: + type: object + description: + A port node pointing to panel port node. + +required: + - "#address-cells" + - "#size-cells" + - compatible + - reg + - port@0 + - port@2 + +example: + - | + anx7625_bridge: encoder@58 { + compatible = "analogix,anx7625"; + reg = <0x58>; + status = "okay"; + panel-flags = <1>; + enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + anx_1_in: endpoint { + remote-endpoint = <&mipi_dsi>; + }; + }; + + port@2 { + reg = <2>; + anx_1_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + };
Signature · 1 line
2.7.4
PATCH v5 2/2 drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP bridge driver
In reply to Xin JiThe ANX7625 is an ultra-low power 4K Mobile HD Transmitter designed for portable device. It converts MIPI DSI/DPI to DisplayPort 1.3 4K.
The ANX7625 can support both USB Type-C PD feature and MIPI DSI/DPI to DP feature. This driver only enabled MIPI DSI/DPI to DP feature.
Signed-off-by Xin Ji <[email protected]>
--- drivers/gpu/drm/bridge/Makefile | 2 +- drivers/gpu/drm/bridge/analogix/Kconfig | 6 + drivers/gpu/drm/bridge/analogix/Makefile | 1 + drivers/gpu/drm/bridge/analogix/anx7625.c | 2044 +++++++++++++++++++++++++++++ drivers/gpu/drm/bridge/analogix/anx7625.h | 406 ++++++ 5 files changed, 2458 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/bridge/analogix/anx7625.c create mode 100644 drivers/gpu/drm/bridge/analogix/anx7625.h
drivers/gpu/drm/bridge/Makefile +1 -1
@@ -12,8 +12,8 @@ obj-$(CONFIG_DRM_SII9234) += sii9234.o obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o -obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/ obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/ obj-$(CONFIG_DRM_TI_SN65DSI86) += ti-sn65dsi86.o obj-$(CONFIG_DRM_TI_TFP410) += ti-tfp410.o +obj-y += analogix/ obj-y += synopsys/
drivers/gpu/drm/bridge/analogix/Kconfig +6 -0
@@ -2,3 +2,9 @@ config DRM_ANALOGIX_DP tristate depends on DRM + +config ANALOGIX_ANX7625 + tristate "Analogix MIPI to DP interface support" + help + ANX7625 is an ultra-low power 4K mobile HD transmitter designed + for portable devices. It converts MIPI/DPI to DisplayPort1.3 4K.
drivers/gpu/drm/bridge/analogix/Makefile +1 -0
@@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_ANALOGIX_ANX7625) += anx7625.o analogix_dp-objs := analogix_dp_core.o analogix_dp_reg.o obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix_dp.o
drivers/gpu/drm/bridge/analogix/anx7625.c new file +2044 -0
2,044 lines not on this page · raw message
drivers/gpu/drm/bridge/analogix/anx7625.h new file +406 -0
406 lines not on this page · raw message
Signature · 1 line
2.7.4