readmirror feature (read_policy sysfs and
v8 cover readmirror feature (read_policy sysfs and
v8:
Separate the sysfs framework and the %pid read_policy into a separate patchset here, so that the new read policies can be in its own patch set. Use fallthrough; instead of comments.
__ Original email: __
v7:
Fix switch's fall through warning. Changle logs updates where necessary.
v6:
Patch 4/5 - If there is no change in device's read prefer then don't log Patch 4/5 - Add pid to the logs
Patch 5/5 - If there isn't read preferred device in the chunk don't reset read policy to default, instead just use stripe 0. As this is in the read path it avoids going through the device list to find read preferred device. So inline to this drop to check if there is read preferred device before setting read policy to device.
v5:
Worked on review comments as received in its previous version. Please refer to individual patches for the specific changes. Introduces the new read_policy 'device'.
v4:
Rename readmirror attribute to read_policy. Drop separate kobj for readmirror instead create read_policy attribute in fsid kobj. merge v2:2/3 and v2:3/3 into v4:2/2. Patch titles have changed.
v3:
v2:
Mainly fixes the fs_devices::readmirror declaration type from atomic_t to u8. (Thanks Josef).
v1:
As of now we use only %pid method to read stripped mirrored data. So application's process id determines the stripe id to be read. This type of routing typically helps in a system with many small independent applications tying to read random data. On the other hand the %pid based read IO distribution policy is inefficient if there is a single application trying to read large data as because the overall disk bandwidth would remains under utilized.
One type of readmirror policy isn't good enough and other choices are routing the IO based on device's waitqueue or manual when we have a read-preferred device or a readmirror policy based on the target storage caching. So this patch-set introduces a framework where we could add more readmirror policies.
This policy is a filesystem wide policy as of now, and though the readmirror policy at the subvolume level is a novel approach as it provides maximum flexibility in the data center, but as of now its not practical to implement such a granularity as you can't really ensure reflinked extents will be read from the stripe of its desire and so there will be more limitations and it can be assessed separately.
The approach in this patch-set is sys interface with in-memory policy. And does not add any new readmirror type in this set, which can be add once we are ok with the framework. Also the default policy remains %pid.
Previous works:
----------------------------------------------------------------------
There were few RFCs [1] before, mainly to figure out storage (or in memory only) for the readmirror policy and the interface needed.
[1]
https://www.mail-archive.com/[email protected]/msg86368.html
https://lore.kernel.org/linux-btrfs/[email protected]/
https://lore.kernel.org/linux-btrfs/[email protected]/
https://patchwork.kernel.org/cover/10859213/
Mount -o:
In the first trial it was attempted to use the mount -o option to carry the readmirror policy, this is good for debugging which can make sure even the mount thread metadata tree blocks are read from the disk desired. It was very effective in testing radi1/raid10 write-holes.
Extended attribute:
As extended attribute is associated with the inode, to implement this there is bit of extended attribute abuse or else makes it mandatory to mount the rootid 5. Its messy unless readmirror policy is applied at the subvol level which is not possible as of now.
An item type:
The proposed patch was to create an item to hold the readmirror policy, it makes sense when compared to the abusive extended attribute approach but introduces a new item and so no backward compatibility.
-----------------------------------------------------------------------
Anand Jain (3):
btrfs: add btrfs_strmatch helper
btrfs: create read policy framework
btrfs: create read policy sysfs attribute, pid
fs/btrfs/sysfs.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++ fs/btrfs/volumes.c | 15 +++++++++- fs/btrfs/volumes.h | 14 +++++++++ 3 files changed, 100 insertions(+), 1 deletion(-)
Signature · 1 line
2.25.1
PATCH v8 1/3 btrfs: add btrfs_strmatch helper
Add a generic helper to match the golden-string in the given-string, and ignore the leading and trailing whitespaces if any.
---
v5: born
fs/btrfs/sysfs.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
fs/btrfs/sysfs.c +23 -0
@@ -863,6 +863,29 @@ static ssize_t btrfs_generation_show(struct kobject *kobj, } BTRFS_ATTR(, generation, btrfs_generation_show); +/* +* Match the %golden in the %given. Ignore the leading and trailing whitespaces +* if any. +*/ +static int btrfs_strmatch (const char *given,const char *golden) +{ +size_t len =strlen (golden); +char *stripped; + +/* strip leading whitespace */ + stripped =skip_spaces (given); + +if (strncmp (stripped, golden, len) ==0 ) { +/* strip trailing whitespace */ +if (strlen (skip_spaces (stripped + len))) +return -EINVAL ; + +return 0 ; + } + +return -EINVAL ; +} +static const struct attribute *btrfs_attrs[] = { BTRFS_ATTR_PTR(, label), BTRFS_ATTR_PTR(, nodesize),
Signature · 1 line
2.25.1
Re: [PATCH v8 1/3] btrfs: add btrfs_strmatch helper
Quoted 25 lines · Anand Jain
Add a generic helper to match the golden-string in the given-string, and ignore the leading and trailing whitespaces if any.
Signed-off-by Anand Jain <[email protected]>Suggested-by David Sterba <[email protected]>---
v5: bornfs/btrfs/sysfs.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)fs/btrfs/sysfs.c +6
-0@@ -863,6 +863,29 @@ static ssize_t btrfs_generation_show(struct kobject *kobj, } BTRFS_ATTR(, generation, btrfs_generation_show); +/* +* Match the %golden in the %given. Ignore the leading and trailing whitespaces +* if any. +*/ +static int btrfs_strmatch (const char *given,const char *golden) +{
fs/btrfs/sysfs.c static ssize_t btrfs_generation_show(struct kobject *kobj, · line 881
Quoted 10 lines
fs/btrfs/sysfs.c +10
-0+size_t len =strlen (golden); +char *stripped; + +/* strip leading whitespace */ + stripped =skip_spaces (given); + +if (strncmp (stripped, golden, len) ==0 ) { +/* strip trailing whitespace */ +if (strlen (skip_spaces (stripped + len))) +return -EINVAL ;
if ((strncmp(stripped, golden, len) == 0) &&
(strlen(skip_spaces(stripped + len)) == 0)) return 0;
Thanks,
Josef
Re: [PATCH v8 1/3] btrfs: add btrfs_strmatch helper
Quoted 33 lines · Josef Bacik
Quoted 32 lines · Anand Jain
Add a generic helper to match the golden-string in the given-string, and ignore the leading and trailing whitespaces if any.
Signed-off-by Anand Jain <[email protected]>Suggested-by David Sterba <[email protected]>---
v5: born
fs/btrfs/sysfs.c| 23 +++++++++++++++++++++++1 file changed, 23 insertions(+)fs/btrfs/sysfs.c +2
-0@@ -863,6 +863,29 @@ static ssize_t btrfs_generation_show(structkobject *kobj, } BTRFS_ATTR(, generation, btrfs_generation_show); +/* +* Match the %golden in the %given. Ignore the leading and trailing whitespaces
+ * if any.
+ */fs/btrfs/sysfs.c +8
-0+static int btrfs_strmatch (const char *given,const char *golden) +{ + size_t len = strlen(golden); + char *stripped; + + /* strip leading whitespace */ + stripped = skip_spaces(given); +
Quoted 8 lines
Quoted 4 lines
+ if (
strncmp(stripped, golden, len)== 0) {
+ /* strip trailing whitespace */
+ if (strlen(skip_spaces(stripped + len)))
+ return-EINVAL;if ((
strncmp(stripped, golden, len)== 0) &&
(strlen(skip_spaces(stripped + len))== 0))
return 0;
fixed in v9 as well.
Thanks, Anand
Quoted 4 lines
Thanks,
Josef
PATCH v8 2/3 btrfs: create read policy framework
In reply to Anand JainAs of now, we use the %pid method to read striped mirrored data, which means process id determines the stripe id to read. This type of routing typically helps in a system with many small independent processes tying to read random data. On the other hand, the %pid based read IO policy is inefficient because if there is a single process trying to read a large file, the overall disk bandwidth remains under-utilized.
So this patch introduces a read policy framework so that we could add more read policies, such as IO routing based on the device's wait-queue or manual when we have a read-preferred device or a policy based on the target storage caching.
---
v8: use fallthrough;
v7: Fix missing /* fall through */ in the switch
Removed Reviewed-by: Josef Bacik <[email protected]>
v6:-
v5: Title renamed from:- btrfs: add read_policy framework
Change log updated.
Unnecessary comment dropped, added more where necessary. Optimize code in the switch remove duplicate code. Define BTRFS_READ_POLICY_DEFAULT dropped.
Rename enum btrfs_read_policy_type to enum btrfs_read_policy. Rename BTRFS_READ_BY_PID to BTRFS_READ_POLICY_PID.
(As its mainly renames. Reviewed-by retained).
v4: -
v3: Declare fs_devices::readmirror as enum btrfs_readmirror_policy_type
v2: Declare fs_devices::readmirror as u8 instead of atomic_t
A small change in comment and change log wordings.
fs/btrfs/volumes.c | 15 ++++++++++++++- fs/btrfs/volumes.h | 14 ++++++++++++++ 2 files changed, 28 insertions(+), 1 deletion(-)
fs/btrfs/volumes.c +14 -1
@@ -1223,6 +1223,7 @@ static int open_fs_devices(struct btrfs_fs_devices *fs_devices, fs_devices->latest_bdev = latest_dev->bdev; fs_devices->total_rw_bytes =0 ; fs_devices->chunk_alloc_policy =BTRFS_CHUNK_ALLOC_REGULAR ; + fs_devices->read_policy =BTRFS_READ_POLICY_PID ;return 0 ; }
@@ -5482,7 +5483,19 @@ static int find_live_mirror(struct btrfs_fs_info *fs_info, else num_stripes = map->num_stripes; - preferred_mirror = first + current->pid % num_stripes; +switch (fs_info->fs_devices->read_policy) { +default : +/* +* Shouldn't happen, just warn and use pid instead of failing. +*/ +btrfs_warn_rl (fs_info, +"unknown read_policy type %u, fallback to pid" , + fs_info->fs_devices->read_policy); + fallthrough; +case BTRFS_READ_POLICY_PID : + preferred_mirror = first + current->pid % num_stripes; +break ; + }if (dev_replace_is_ongoing && fs_info->dev_replace.cont_reading_from_srcdev_mode ==
fs/btrfs/volumes.h +14 -0
@@ -211,6 +211,15 @@ enum btrfs_chunk_allocation_policy { BTRFS_CHUNK_ALLOC_REGULAR, }; +/* +* Read policies for the mirrored block groups, read picks the stripe based +* on these policies. +*/ +enum btrfs_read_policy { +BTRFS_READ_POLICY_PID , +BTRFS_NR_READ_POLICY , +}; +struct btrfs_fs_devices {u8 fsid[BTRFS_FSID_SIZE ];/* FS specific uuid */ u8 metadata_uuid[BTRFS_FSID_SIZE ];
@@ -264,6 +273,11 @@ struct btrfs_fs_devices {struct completion kobj_unregister;enum btrfs_chunk_allocation_policy chunk_alloc_policy; + +/* +* policy used to read the mirrored stripes +*/ +enum btrfs_read_policy read_policy; };#define BTRFS_BIO_INLINE_CSUM_SIZE 64
Signature · 1 line
2.25.1
Re: [PATCH v8 2/3] btrfs: create read policy framework
Quoted 7 lines · Anand Jain
As of now, we use the %pid method to read striped mirrored data, which means process id determines the stripe id to read. This type of routing typically helps in a system with many small independent processes tying to read random data. On the other hand, the %pid based read IO policy is inefficient because if there is a single process trying to read a large file, the overall disk bandwidth remains under-utilized.
Quoted 6 lines
So this patch introduces a read policy framework so that we could add more read policies, such as IO routing based on the device's wait-queue or manual when we have a read-preferred device or a policy based on the target storage caching.
Signed-off-by Anand Jain <[email protected]>
Thanks,
Josef
PATCH v8 3/3 btrfs: create read policy sysfs attribute, pid
In reply to Anand JainAdd
/sys/fs/btrfs/UUID/read_policy
attribute so that the read policy for the raid1, raid1c34 and raid10 can be tuned.
When this attribute is read, it shall show all available policies, with active policy being with in [ ]. The read_policy attribute can be written using one of the items listed in there.
For example:
$cat /sys/fs/btrfs/UUID/read_policy
[pid]
$echo pid > /sys/fs/btrfs/UUID/read_policy
---
rebase on latest misc-next
v5:
Title rename: old: btrfs: sysfs, add read_policy attribute Uses the btrfs_strmatch() helper (BTRFS_READ_POLICY_NAME_MAX dropped). Use the table for the policy names.
Rename len to ret.
Use a simple logic to prefix space in btrfs_read_policy_show()
v4:-
v3: rename [by_pid] to [pid]
v2: v2: check input len before strip and kstrdup
fs/btrfs/sysfs.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+)
fs/btrfs/sysfs.c +49 -0
@@ -886,6 +886,54 @@ static int btrfs_strmatch(const char *given, const char *golden)return -EINVAL ; } +static const char *const btrfs_read_policy_name[] = {"pid" }; + +static ssize_t btrfs_read_policy_show (struct kobject *kobj, +struct kobj_attribute *a,char *buf) +{ +int i; +ssize_t ret =0 ; +struct btrfs_fs_devices *fs_devices =to_fs_devs (kobj); + +for (i =0 ; i <BTRFS_NR_READ_POLICY ; i++) { +if (fs_devices->read_policy == i) + ret +=snprintf (buf + ret,PAGE_SIZE - ret,"%s[%s]" , + (ret ==0 ?"" :" " ), + btrfs_read_policy_name[i]); +else + ret +=snprintf (buf + ret,PAGE_SIZE - ret,"%s%s" , + (ret ==0 ?"" :" " ), + btrfs_read_policy_name[i]); + } + + ret +=snprintf (buf + ret,PAGE_SIZE - ret,"\n" ); + +return ret; +} + +static ssize_t btrfs_read_policy_store (struct kobject *kobj, +struct kobj_attribute *a, +const char *buf,size_t len) +{ +int i; +struct btrfs_fs_devices *fs_devices =to_fs_devs (kobj); + +for (i =0 ; i <BTRFS_NR_READ_POLICY ; i++) { +if (btrfs_strmatch (buf, btrfs_read_policy_name[i]) ==0 ) { +if (i != fs_devices->read_policy) { + fs_devices->read_policy = i; +btrfs_info (fs_devices->fs_info, +"read policy set to '%s'" , + btrfs_read_policy_name[i]); + } +return len; + } + } + +return -EINVAL ; +} +BTRFS_ATTR_RW(, read_policy, btrfs_read_policy_show, btrfs_read_policy_store); +static const struct attribute *btrfs_attrs[] = { BTRFS_ATTR_PTR(, label), BTRFS_ATTR_PTR(, nodesize),
@@ -896,6 +944,7 @@ static const struct attribute *btrfs_attrs[] = { BTRFS_ATTR_PTR(, checksum), BTRFS_ATTR_PTR(, exclusive_operation), BTRFS_ATTR_PTR(, generation), + BTRFS_ATTR_PTR(, read_policy), NULL, };
Signature · 1 line
2.25.1
Re: [PATCH v8 3/3] btrfs: create read policy sysfs attribute, pid
Quoted 39 lines · Anand Jain
Add
/sys/fs/btrfs/UUID/read_policyattribute so that the read policy for the raid1, raid1c34 and raid10 can be tuned.
When this attribute is read, it shall show all available policies, with active policy being with in [ ]. The
read_policyattribute can be written using one of the items listed in there.For example:
$cat/sys/fs/btrfs/UUID/read_policy
[pid]
$echo pid >/sys/fs/btrfs/UUID/read_policySigned-off-by Anand Jain <[email protected]>---
rebase on latest misc-next
v5:
Title rename: old: btrfs: sysfs, addread_policyattribute Uses thebtrfs_strmatch()helper (BTRFS_READ_POLICY_NAME_MAXdropped). Use the table for the policy names.
Rename len to ret.
Use a simple logic to prefix space inbtrfs_read_policy_show()Reviewed-by Josef Bacik <[email protected]> dropped.v4:-
v3: rename [by_pid] to [pid]
v2: v2: check input len before strip and kstrdupfs/btrfs/sysfs.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+)fs/btrfs/sysfs.c +0
-0
fs/btrfs/sysfs.c static int btrfs_strmatch(const char *given, const char *golden) · line 889
Quoted 4 lines
fs/btrfs/sysfs.c +1
-0@@ -886,6 +886,54 @@ static int btrfs_strmatch(const char *given, const char *golden)return -EINVAL ; } +static const char *const btrfs_read_policy_name[] = {"pid" };
This fails checkpatch.pl, it should be
static const char * const. Thanks,
Josef
Re: [PATCH v8 3/3] btrfs: create read policy sysfs attribute, pid
Quoted 11 lines
fs/btrfs/sysfs.c static int btrfs_strmatch(const char *given, · line 889
Quoted 8 lines
fs/btrfs/sysfs.c +1
-0@@ -886,6 +886,54 @@ static int btrfs_strmatch(const char *given, const char *golden) return -EINVAL; } +static const char *const btrfs_read_policy_name[] = {"pid" };This fails checkpatch.pl, it should be
Quoted 1 line
static const char * const. Thanks,
This is taken care in v9. Thanks.
Anand
Quoted 2 lines
Josef