Skip to contentSkip to conversation

RISC-V: Start to remove xlen preprocess

PATCH Superseded Alistair Francis 4 participants 24 messages Dec 14, 2020 – Dec 16, 2020

Subsystems (2)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v3 cover RISC-V: Start to remove xlen preprocess

The RISC-V QEMU port currently has lot of preprocessor directives that check if we are targetting a 32-bit or 64-bit CPU. This means that the 64-bit RISC-V target can not run 32-bit CPUs. This is different to most other QEMU architectures and doesn't allow us to mix xlens (such as when running Hypervisors with different xlen guests).

This series is a step toward removing some of those to allow us to use 32-bit CPUs on 64-bit RISC-V targets.

v3:
- Address Richard's comments
v2:
- Rebase on the latest RISC-V tree

Alistair Francis (15):
hw/riscv: Expand the is 32-bit check to support more CPUs target/riscv: Add a TYPE_RISCV_CPU_BASE CPU
riscv: spike: Remove target macro conditionals
riscv: virt: Remove target macro conditionals hw/riscv: boot: Remove compile time XLEN checks hw/riscv: virt: Remove compile time XLEN checks hw/riscv: spike: Remove compile time XLEN checks hw/riscv: sifive_u: Remove compile time XLEN checks target/riscv: fpu_helper: Match function defs in HELPER macros target/riscv: Add a riscv_cpu_is_32bit() helper function target/riscv: Specify the XLEN for CPUs target/riscv: cpu: Remove compile time XLEN checks target/riscv: cpu_helper: Remove compile time XLEN checks target/riscv: csr: Remove compile time XLEN checks target/riscv: cpu: Set XLEN independently from target

 include/hw/riscv/boot.h   |   8 +-
 include/hw/riscv/spike.h  |   6 --
 include/hw/riscv/virt.h   |   6 --
 target/riscv/cpu.h        |   8 ++
 target/riscv/cpu_bits.h   |   4 +-
 hw/riscv/boot.c           |  67 +++++++++------
 hw/riscv/sifive_u.c       |  57 ++++++------
 hw/riscv/spike.c          |  50 ++++++-----
 hw/riscv/virt.c           |  36 ++++----
 target/riscv/cpu.c        |  84 ++++++++++++------
 target/riscv/cpu_helper.c |  12 +--
 target/riscv/csr.c        | 176 ++++++++++++++++++++------------------
 target/riscv/fpu_helper.c |  16 ++--
 13 files changed, 295 insertions(+), 235 deletions(-)
Signature · 1 line
2.29.2
#1 lore raw

PATCH v3 1/15 hw/riscv: Expand the is 32-bit check to support more CPUs

Currently the riscv_is_32_bit() function only supports the generic rv32 CPUs. Extend the function to support the SiFive and LowRISC CPUs as well.

---
 hw/riscv/boot.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
hw/riscv/boot.c +11 -1
index d62f3dc758..3c70ac75d7 100644
@@ -41,7 +41,17 @@
 
 bool riscv_is_32_bit(MachineState *machine)
 {
-    if (!strncmp(machine->cpu_type, "rv32", 4)) {
+    /*
+     * To determine if the CPU is 32-bit we need to check a few different CPUs.
+     *
+     * If the CPU starts with rv32
+     * If the CPU is a sifive 3 seriries CPU (E31, U34)
+     * If it's the Ibex CPU
+     */
+    if (!strncmp(machine->cpu_type, "rv32", 4) ||
+        (!strncmp(machine->cpu_type, "sifive", 6) &&
+            machine->cpu_type[8] == '3') ||
+        !strncmp(machine->cpu_type, "lowrisc-ibex", 12)) {
         return true;
     } else {
         return false;
Signature · 1 line
2.29.2
#2 lore raw

Re: [PATCH v3 01/15] hw/riscv: Expand the is 32-bit check to support more CPUs

Quoted 20 lines · Alistair Francis

Currently the riscv_is_32_bit() function only supports the generic rv32 CPUs. Extend the function to support the SiFive and LowRISC CPUs as well.

---
 hw/riscv/boot.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
hw/riscv/boot.c +1 -1
index d62f3dc758..3c70ac75d7 100644
@@ -41,7 +41,17 @@
 
 bool riscv_is_32_bit(MachineState *machine)
 {
-    if (!strncmp(machine->cpu_type, "rv32", 4)) {
+    /*

hw/riscv/boot.c line 54

Quoted 10 lines
hw/riscv/boot.c +10 -0
+     * To determine if the CPU is 32-bit we need to check a few different CPUs.
+     *
+     * If the CPU starts with rv32
+     * If the CPU is a sifive 3 seriries CPU (E31, U34)
+     * If it's the Ibex CPU
+     */
+    if (!strncmp(machine->cpu_type, "rv32", 4) ||
+        (!strncmp(machine->cpu_type, "sifive", 6) &&
+            machine->cpu_type[8] == '3') ||
+        !strncmp(machine->cpu_type, "lowrisc-ibex", 12)) {

This does not look like a scalable way. With more and more CPU added in the future, this may end up with a huge list of strncmps..

hw/riscv/boot.c line 57

Quoted 3 lines
hw/riscv/boot.c +0 -0
         return true;
     } else {
         return false;

Regards,
Bin

#3 lore raw

Re: [PATCH v3 01/15] hw/riscv: Expand the is 32-bit check to support more CPUs

Quoted 28 lines · Bin Meng
Quoted 25 lines · Alistair Francis

Currently the riscv_is_32_bit() function only supports the generic rv32 CPUs. Extend the function to support the SiFive and LowRISC CPUs as well.

---
 hw/riscv/boot.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
hw/riscv/boot.c +6 -1
index d62f3dc758..3c70ac75d7 100644
@@ -41,7 +41,17 @@
 
 bool riscv_is_32_bit(MachineState *machine)
 {
-    if (!strncmp(machine->cpu_type, "rv32", 4)) {
+    /*
+     * To determine if the CPU is 32-bit we need to check a few different CPUs.
+     *
+     * If the CPU starts with rv32
+     * If the CPU is a sifive 3 seriries CPU (E31, U34)
+     * If it's the Ibex CPU
Quoted 8 lines

hw/riscv/boot.c line 54

Quoted 5 lines
hw/riscv/boot.c +5 -0
+     */
+    if (!strncmp(machine->cpu_type, "rv32", 4) ||
+        (!strncmp(machine->cpu_type, "sifive", 6) &&
+            machine->cpu_type[8] == '3') ||
+        !strncmp(machine->cpu_type, "lowrisc-ibex", 12)) {

This does not look like a scalable way. With more and more CPU added in the future, this may end up with a huge list of strncmps..

Any better ideas?

It should handle all SiFive CPUs, besides that we don't have that many CPUs.

Alistair

Quoted 7 lines

hw/riscv/boot.c line 57

Quoted 4 lines
hw/riscv/boot.c +0 -0
         return true;
     } else {
         return false;

Regards,
Bin

#4 lore raw

Re: [PATCH v3 01/15] hw/riscv: Expand the is 32-bit check to support more CPUs

Quoted 38 lines · Alistair Francis
Quoted 28 lines · Bin Meng
Quoted 25 lines · Alistair Francis

Currently the riscv_is_32_bit() function only supports the generic rv32 CPUs. Extend the function to support the SiFive and LowRISC CPUs as well.

---
 hw/riscv/boot.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
hw/riscv/boot.c +6 -1
index d62f3dc758..3c70ac75d7 100644
@@ -41,7 +41,17 @@
 
 bool riscv_is_32_bit(MachineState *machine)
 {
-    if (!strncmp(machine->cpu_type, "rv32", 4)) {
+    /*
+     * To determine if the CPU is 32-bit we need to check a few different CPUs.
+     *
+     * If the CPU starts with rv32
+     * If the CPU is a sifive 3 seriries CPU (E31, U34)
+     * If it's the Ibex CPU
Quoted 8 lines

hw/riscv/boot.c line 54

Quoted 5 lines
hw/riscv/boot.c +5 -0
+     */
+    if (!strncmp(machine->cpu_type, "rv32", 4) ||
+        (!strncmp(machine->cpu_type, "sifive", 6) &&
+            machine->cpu_type[8] == '3') ||
+        !strncmp(machine->cpu_type, "lowrisc-ibex", 12)) {

This does not look like a scalable way. With more and more CPU added in the future, this may end up with a huge list of strncmps..

Quoted 1 line

Any better ideas?

It doesn't appear as if you need to query this before you've instantiated the cpu. The first dynamic use that I see is create_fdt, which happens after that point.

Verified like so:

$ gdb --args ./qemu-system-riscv64 -M virt
(gdb) b rv64_base_cpu_init
Breakpoint 1 at 0x548390: file ../qemu/target/riscv/cpu.c, line 156.
(gdb) b riscv_is_32_bit
Breakpoint 2 at 0x490dd0: file ../qemu/hw/riscv/boot.c, line 37.
(gdb) run
...
Thread 1 "qemu-system-ris" hit Breakpoint 1, rv64_base_cpu_init

From the machine, you can find the boot cpu, and use the riscv_cpu_is_32bit helper on that.

Also, just noticed that the two functions spell "32bit" differently. :-)

r~

#5 lore raw

Re: [PATCH v3 01/15] hw/riscv: Expand the is 32-bit check to support more CPUs

Quoted 57 lines · Richard Henderson
Quoted 38 lines · Alistair Francis
Quoted 28 lines · Bin Meng
Quoted 25 lines · Alistair Francis

Currently the riscv_is_32_bit() function only supports the generic rv32 CPUs. Extend the function to support the SiFive and LowRISC CPUs as well.

---
 hw/riscv/boot.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
hw/riscv/boot.c +6 -1
index d62f3dc758..3c70ac75d7 100644
@@ -41,7 +41,17 @@
 
 bool riscv_is_32_bit(MachineState *machine)
 {
-    if (!strncmp(machine->cpu_type, "rv32", 4)) {
+    /*
+     * To determine if the CPU is 32-bit we need to check a few different CPUs.
+     *
+     * If the CPU starts with rv32
+     * If the CPU is a sifive 3 seriries CPU (E31, U34)
+     * If it's the Ibex CPU
Quoted 8 lines

hw/riscv/boot.c line 54

Quoted 5 lines
hw/riscv/boot.c +5 -0
+     */
+    if (!strncmp(machine->cpu_type, "rv32", 4) ||
+        (!strncmp(machine->cpu_type, "sifive", 6) &&
+            machine->cpu_type[8] == '3') ||
+        !strncmp(machine->cpu_type, "lowrisc-ibex", 12)) {

This does not look like a scalable way. With more and more CPU added in the future, this may end up with a huge list of strncmps..

Quoted 1 line

Any better ideas?

It doesn't appear as if you need to query this before you've instantiated the cpu. The first dynamic use that I see is create_fdt, which happens after that point.

Verified like so:

$ gdb --args ./qemu-system-riscv64 -M virt
(gdb) b rv64_base_cpu_init
Breakpoint 1 at 0x548390: file ../qemu/target/riscv/cpu.c, line 156.
(gdb) b riscv_is_32_bit
Breakpoint 2 at 0x490dd0: file ../qemu/hw/riscv/boot.c, line 37.
(gdb) run
...
Thread 1 "qemu-system-ris" hit Breakpoint 1, rv64_base_cpu_init
Quoted 4 lines
Quoted 1 line

From the machine, you can find the boot cpu, and use the riscv_cpu_is_32bit

helper on that.

Also, just noticed that the two functions spell "32bit" differently. :-)

Thanks for the help Richard.

I have added a commit in v4 that changes the function like you mention. The rebased ended up being a little tricky so I added the commit to the end instead.

Alistair

Quoted 3 lines

r~

#6 lore raw

PATCH v3 2/15 target/riscv: Add a TYPE_RISCV_CPU_BASE CPU

In reply to Alistair Francis
---
 target/riscv/cpu.h | 6 ++++++
 1 file changed, 6 insertions(+)
target/riscv/cpu.h +6 -0
index c0a326c843..9c064f3094 100644
@@ -44,6 +44,12 @@
 #define TYPE_RISCV_CPU_SIFIVE_U34       RISCV_CPU_TYPE_NAME("sifive-u34")
 #define TYPE_RISCV_CPU_SIFIVE_U54       RISCV_CPU_TYPE_NAME("sifive-u54")
 
+#if defined(TARGET_RISCV32)
+# define TYPE_RISCV_CPU_BASE            TYPE_RISCV_CPU_BASE32
+#elif defined(TARGET_RISCV64)
+# define TYPE_RISCV_CPU_BASE            TYPE_RISCV_CPU_BASE64
+#endif
+
 #define RV32 ((target_ulong)1 << (TARGET_LONG_BITS - 2))
 #define RV64 ((target_ulong)2 << (TARGET_LONG_BITS - 2))
 
Signature · 1 line
2.29.2
#7 lore raw

PATCH v3 3/15 riscv: spike: Remove target macro conditionals

In reply to Alistair Francis
---
 include/hw/riscv/spike.h | 6 ------
 hw/riscv/spike.c         | 2 +-
 2 files changed, 1 insertion(+), 7 deletions(-)
include/hw/riscv/spike.h +0 -6
index cddeca2e77..cdd1a13011 100644
@@ -47,10 +47,4 @@ enum {
     SPIKE_DRAM
 };
 
-#if defined(TARGET_RISCV32)
-#define SPIKE_V1_10_0_CPU TYPE_RISCV_CPU_BASE32
-#elif defined(TARGET_RISCV64)
-#define SPIKE_V1_10_0_CPU TYPE_RISCV_CPU_BASE64
-#endif
-
 #endif
hw/riscv/spike.c +1 -1
index facac6e7d2..29f07f47b1 100644
@@ -317,7 +317,7 @@ static void spike_machine_class_init(ObjectClass *oc, void *data)
     mc->init = spike_board_init;
     mc->max_cpus = SPIKE_CPUS_MAX;
     mc->is_default = true;
-    mc->default_cpu_type = SPIKE_V1_10_0_CPU;
+    mc->default_cpu_type = TYPE_RISCV_CPU_BASE;
     mc->possible_cpu_arch_ids = riscv_numa_possible_cpu_arch_ids;
     mc->cpu_index_to_instance_props = riscv_numa_cpu_index_to_props;
     mc->get_default_cpu_node_id = riscv_numa_get_default_cpu_node_id;
Signature · 1 line
2.29.2
#8 lore raw

PATCH v3 4/15 riscv: virt: Remove target macro conditionals

In reply to Alistair Francis
---
 include/hw/riscv/virt.h | 6 ------
 hw/riscv/virt.c         | 2 +-
 2 files changed, 1 insertion(+), 7 deletions(-)
include/hw/riscv/virt.h +0 -6
index b4ed9a32eb..84b7a3848f 100644
@@ -89,10 +89,4 @@ enum {
 #define FDT_INT_MAP_WIDTH     (FDT_PCI_ADDR_CELLS + FDT_PCI_INT_CELLS + 1 + \
                                FDT_PLIC_ADDR_CELLS + FDT_PLIC_INT_CELLS)
 
-#if defined(TARGET_RISCV32)
-#define VIRT_CPU TYPE_RISCV_CPU_BASE32
-#elif defined(TARGET_RISCV64)
-#define VIRT_CPU TYPE_RISCV_CPU_BASE64
-#endif
-
 #endif
hw/riscv/virt.c +1 -1
index 25cea7aa67..995e1c35f1 100644
@@ -706,7 +706,7 @@ static void virt_machine_class_init(ObjectClass *oc, void *data)
     mc->desc = "RISC-V VirtIO board";
     mc->init = virt_machine_init;
     mc->max_cpus = VIRT_CPUS_MAX;
-    mc->default_cpu_type = VIRT_CPU;
+    mc->default_cpu_type = TYPE_RISCV_CPU_BASE;
     mc->pci_allow_0_address = true;
     mc->possible_cpu_arch_ids = riscv_numa_possible_cpu_arch_ids;
     mc->cpu_index_to_instance_props = riscv_numa_cpu_index_to_props;
Signature · 1 line
2.29.2
#9 lore raw

PATCH v3 5/15 hw/riscv: boot: Remove compile time XLEN checks

In reply to Alistair Francis
---
 include/hw/riscv/boot.h |  8 +++---
 hw/riscv/boot.c         | 55 ++++++++++++++++++++++-------------------
 hw/riscv/sifive_u.c     |  2 +-
 hw/riscv/spike.c        |  3 ++-
 hw/riscv/virt.c         |  2 +-
 5 files changed, 39 insertions(+), 31 deletions(-)
include/hw/riscv/boot.h +5 -3
index 0b01988727..b6d37a91d6 100644
@@ -41,10 +41,12 @@ target_ulong riscv_load_kernel(const char *kernel_filename,
 hwaddr riscv_load_initrd(const char *filename, uint64_t mem_size,
                          uint64_t kernel_entry, hwaddr *start);
 uint32_t riscv_load_fdt(hwaddr dram_start, uint64_t dram_size, void *fdt);
-void riscv_setup_rom_reset_vec(hwaddr saddr, hwaddr rom_base,
-                               hwaddr rom_size, uint64_t kernel_entry,
+void riscv_setup_rom_reset_vec(MachineState *machine, hwaddr saddr,
+                               hwaddr rom_base, hwaddr rom_size,
+                               uint64_t kernel_entry,
                                uint32_t fdt_load_addr, void *fdt);
-void riscv_rom_copy_firmware_info(hwaddr rom_base, hwaddr rom_size,
+void riscv_rom_copy_firmware_info(MachineState *machine, hwaddr rom_base,
+                                  hwaddr rom_size,
                                   uint32_t reset_vec_size,
                                   uint64_t kernel_entry);
 
hw/riscv/boot.c +30 -25

99 lines not on this page · raw message

hw/riscv/sifive_u.c +1 -1
index 2f19a9cda2..d550befadb 100644
@@ -550,7 +550,7 @@ static void sifive_u_machine_init(MachineState *machine)
     rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec),
                           memmap[SIFIVE_U_DEV_MROM].base, &address_space_memory);
 
-    riscv_rom_copy_firmware_info(memmap[SIFIVE_U_DEV_MROM].base,
+    riscv_rom_copy_firmware_info(machine, memmap[SIFIVE_U_DEV_MROM].base,
                                  memmap[SIFIVE_U_DEV_MROM].size,
                                  sizeof(reset_vec), kernel_entry);
 }
hw/riscv/spike.c +2 -1
index 29f07f47b1..875f371f0f 100644
@@ -296,7 +296,8 @@ static void spike_board_init(MachineState *machine)
     fdt_load_addr = riscv_load_fdt(memmap[SPIKE_DRAM].base,
                                    machine->ram_size, s->fdt);
     /* load the reset vector */
-    riscv_setup_rom_reset_vec(memmap[SPIKE_DRAM].base, memmap[SPIKE_MROM].base,
+    riscv_setup_rom_reset_vec(machine, memmap[SPIKE_DRAM].base,
+                              memmap[SPIKE_MROM].base,
                               memmap[SPIKE_MROM].size, kernel_entry,
                               fdt_load_addr, s->fdt);
 
hw/riscv/virt.c +1 -1
index 995e1c35f1..f8c5509f13 100644
@@ -656,7 +656,7 @@ static void virt_machine_init(MachineState *machine)
     fdt_load_addr = riscv_load_fdt(memmap[VIRT_DRAM].base,
                                    machine->ram_size, s->fdt);
     /* load the reset vector */
-    riscv_setup_rom_reset_vec(start_addr, virt_memmap[VIRT_MROM].base,
+    riscv_setup_rom_reset_vec(machine, start_addr, virt_memmap[VIRT_MROM].base,
                               virt_memmap[VIRT_MROM].size, kernel_entry,
                               fdt_load_addr, s->fdt);
 
Signature · 1 line
2.29.2
#10 lore raw

PATCH v3 6/15 hw/riscv: virt: Remove compile time XLEN checks

In reply to Alistair Francis
---
 hw/riscv/virt.c | 32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)
hw/riscv/virt.c +17 -15
index f8c5509f13..915e9ae216 100644
@@ -43,12 +43,6 @@
 #include "hw/pci/pci.h"
 #include "hw/pci-host/gpex.h"
 
-#if defined(TARGET_RISCV32)
-# define BIOS_FILENAME "opensbi-riscv32-generic-fw_dynamic.bin"
-#else
-# define BIOS_FILENAME "opensbi-riscv64-generic-fw_dynamic.bin"
-#endif
-
 static const struct MemmapEntry {
     hwaddr base;
     hwaddr size;
@@ -177,7 +171,7 @@ static void create_pcie_irq_map(void *fdt, char *nodename,
 }
 
 static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
-    uint64_t mem_size, const char *cmdline)
+                       uint64_t mem_size, const char *cmdline, bool is_32_bit)
 {
     void *fdt;
     int i, cpu, socket;
@@ -242,11 +236,11 @@ static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
             cpu_name = g_strdup_printf("/cpus/cpu@%d",
                 s->soc[socket].hartid_base + cpu);
             qemu_fdt_add_subnode(fdt, cpu_name);
-#if defined(TARGET_RISCV32)
-            qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv32");
-#else
-            qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv48");
-#endif
+            if (is_32_bit) {
+                qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv32");
+            } else {
+                qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv48");
+            }
             name = riscv_isa_string(&s->soc[socket].harts[cpu]);
             qemu_fdt_setprop_string(fdt, cpu_name, "riscv,isa", name);
             g_free(name);
@@ -608,7 +602,8 @@ static void virt_machine_init(MachineState *machine)
         main_mem);
 
     /* create device tree */
-    create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline);
+    create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline,
+               riscv_is_32_bit(machine));
 
     /* boot rom */
     memory_region_init_rom(mask_rom, NULL, "riscv_virt_board.mrom",
@@ -616,8 +611,15 @@ static void virt_machine_init(MachineState *machine)
     memory_region_add_subregion(system_memory, memmap[VIRT_MROM].base,
                                 mask_rom);
 
-    firmware_end_addr = riscv_find_and_load_firmware(machine, BIOS_FILENAME,
-                                                     start_addr, NULL);
+    if (riscv_is_32_bit(machine)) {
+        firmware_end_addr = riscv_find_and_load_firmware(machine,
+                                    "opensbi-riscv32-generic-fw_dynamic.bin",
+                                    start_addr, NULL);
+    } else {
+        firmware_end_addr = riscv_find_and_load_firmware(machine,
+                                    "opensbi-riscv64-generic-fw_dynamic.bin",
+                                    start_addr, NULL);
+    }
 
     if (machine->kernel_filename) {
         kernel_start_addr = riscv_calc_kernel_start_addr(machine,
Signature · 1 line
2.29.2
#11 lore raw

PATCH v3 7/15 hw/riscv: spike: Remove compile time XLEN checks

In reply to Alistair Francis
---
 hw/riscv/spike.c | 45 ++++++++++++++++++++++++---------------------
 1 file changed, 24 insertions(+), 21 deletions(-)
hw/riscv/spike.c +24 -21
index 875f371f0f..3e47e4579d 100644
@@ -43,17 +43,6 @@
 #include "sysemu/qtest.h"
 #include "sysemu/sysemu.h"
 
-/*
- * Not like other RISC-V machines that use plain binary bios images,
- * keeping ELF files here was intentional because BIN files don't work
- * for the Spike machine as HTIF emulation depends on ELF parsing.
- */
-#if defined(TARGET_RISCV32)
-# define BIOS_FILENAME "opensbi-riscv32-generic-fw_dynamic.elf"
-#else
-# define BIOS_FILENAME "opensbi-riscv64-generic-fw_dynamic.elf"
-#endif
-
 static const struct MemmapEntry {
     hwaddr base;
     hwaddr size;
@@ -64,7 +53,7 @@ static const struct MemmapEntry {
 };
 
 static void create_fdt(SpikeState *s, const struct MemmapEntry *memmap,
-    uint64_t mem_size, const char *cmdline)
+                       uint64_t mem_size, const char *cmdline, bool is_32_bit)
 {
     void *fdt;
     uint64_t addr, size;
@@ -115,11 +104,11 @@ static void create_fdt(SpikeState *s, const struct MemmapEntry *memmap,
             cpu_name = g_strdup_printf("/cpus/cpu@%d",
                 s->soc[socket].hartid_base + cpu);
             qemu_fdt_add_subnode(fdt, cpu_name);
-#if defined(TARGET_RISCV32)
-            qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv32");
-#else
-            qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv48");
-#endif
+            if (is_32_bit) {
+                qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv32");
+            } else {
+                qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv48");
+            }
             name = riscv_isa_string(&s->soc[socket].harts[cpu]);
             qemu_fdt_setprop_string(fdt, cpu_name, "riscv,isa", name);
             g_free(name);
@@ -254,7 +243,8 @@ static void spike_board_init(MachineState *machine)
         main_mem);
 
     /* create device tree */
-    create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline);
+    create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline,
+               riscv_is_32_bit(machine));
 
     /* boot rom */
     memory_region_init_rom(mask_rom, NULL, "riscv.spike.mrom",
@@ -262,9 +252,22 @@ static void spike_board_init(MachineState *machine)
     memory_region_add_subregion(system_memory, memmap[SPIKE_MROM].base,
                                 mask_rom);
 
-    firmware_end_addr = riscv_find_and_load_firmware(machine, BIOS_FILENAME,
-                                                     memmap[SPIKE_DRAM].base,
-                                                     htif_symbol_callback);
+    /*
+     * Not like other RISC-V machines that use plain binary bios images,
+     * keeping ELF files here was intentional because BIN files don't work
+     * for the Spike machine as HTIF emulation depends on ELF parsing.
+     */
+    if (riscv_is_32_bit(machine)) {
+        firmware_end_addr = riscv_find_and_load_firmware(machine,
+                                    "opensbi-riscv32-generic-fw_dynamic.elf",
+                                    memmap[SPIKE_DRAM].base,
+                                    htif_symbol_callback);
+    } else {
+        firmware_end_addr = riscv_find_and_load_firmware(machine,
+                                    "opensbi-riscv64-generic-fw_dynamic.elf",
+                                    memmap[SPIKE_DRAM].base,
+                                    htif_symbol_callback);
+    }
 
     if (machine->kernel_filename) {
         kernel_start_addr = riscv_calc_kernel_start_addr(machine,
Signature · 1 line
2.29.2
#12 lore raw

PATCH v3 8/15 hw/riscv: sifive_u: Remove compile time XLEN checks

In reply to Alistair Francis
---
 hw/riscv/sifive_u.c | 55 ++++++++++++++++++++++++---------------------
 1 file changed, 30 insertions(+), 25 deletions(-)
hw/riscv/sifive_u.c +30 -25
index d550befadb..7216329237 100644
@@ -60,12 +60,6 @@
 
 #include <libfdt.h>
 
-#if defined(TARGET_RISCV32)
-# define BIOS_FILENAME "opensbi-riscv32-generic-fw_dynamic.bin"
-#else
-# define BIOS_FILENAME "opensbi-riscv64-generic-fw_dynamic.bin"
-#endif
-
 static const struct MemmapEntry {
     hwaddr base;
     hwaddr size;
@@ -93,7 +87,7 @@ static const struct MemmapEntry {
 #define GEM_REVISION        0x10070109
 
 static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
-    uint64_t mem_size, const char *cmdline)
+                       uint64_t mem_size, const char *cmdline, bool is_32_bit)
 {
     MachineState *ms = MACHINE(qdev_get_machine());
     void *fdt;
@@ -178,11 +172,11 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
         qemu_fdt_add_subnode(fdt, nodename);
         /* cpu 0 is the management hart that does not have mmu */
         if (cpu != 0) {
-#if defined(TARGET_RISCV32)
-            qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32");
-#else
-            qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48");
-#endif
+            if (is_32_bit) {
+                qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32");
+            } else {
+                qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48");
+            }
             isa = riscv_isa_string(&s->soc.u_cpus.harts[cpu - 1]);
         } else {
             isa = riscv_isa_string(&s->soc.e_cpus.harts[0]);
@@ -458,7 +452,8 @@ static void sifive_u_machine_init(MachineState *machine)
                           qemu_allocate_irq(sifive_u_machine_reset, NULL, 0));
 
     /* create device tree */
-    create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline);
+    create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline,
+               riscv_is_32_bit(machine));
 
     if (s->start_in_flash) {
         /*
@@ -487,8 +482,15 @@ static void sifive_u_machine_init(MachineState *machine)
         break;
     }
 
-    firmware_end_addr = riscv_find_and_load_firmware(machine, BIOS_FILENAME,
-                                                     start_addr, NULL);
+    if (riscv_is_32_bit(machine)) {
+        firmware_end_addr = riscv_find_and_load_firmware(machine,
+                                    "opensbi-riscv32-generic-fw_dynamic.bin",
+                                    start_addr, NULL);
+    } else {
+        firmware_end_addr = riscv_find_and_load_firmware(machine,
+                                    "opensbi-riscv64-generic-fw_dynamic.bin",
+                                    start_addr, NULL);
+    }
 
     if (machine->kernel_filename) {
         kernel_start_addr = riscv_calc_kernel_start_addr(machine,
@@ -518,9 +520,9 @@ static void sifive_u_machine_init(MachineState *machine)
     /* Compute the fdt load address in dram */
     fdt_load_addr = riscv_load_fdt(memmap[SIFIVE_U_DEV_DRAM].base,
                                    machine->ram_size, s->fdt);
-    #if defined(TARGET_RISCV64)
-    start_addr_hi32 = start_addr >> 32;
-    #endif
+    if (!riscv_is_32_bit(machine)) {
+        start_addr_hi32 = (uint64_t)start_addr >> 32;
+    }
 
     /* reset vector */
     uint32_t reset_vec[11] = {
@@ -528,13 +530,8 @@ static void sifive_u_machine_init(MachineState *machine)
         0x00000297,                    /* 1:  auipc  t0, %pcrel_hi(fw_dyn) */
         0x02828613,                    /*     addi   a2, t0, %pcrel_lo(1b) */
         0xf1402573,                    /*     csrr   a0, mhartid  */
-#if defined(TARGET_RISCV32)
-        0x0202a583,                    /*     lw     a1, 32(t0) */
-        0x0182a283,                    /*     lw     t0, 24(t0) */
-#elif defined(TARGET_RISCV64)
-        0x0202b583,                    /*     ld     a1, 32(t0) */
-        0x0182b283,                    /*     ld     t0, 24(t0) */
-#endif
+        0,
+        0,
         0x00028067,                    /*     jr     t0 */
         start_addr,                    /* start: .dword */
         start_addr_hi32,
@@ -542,6 +539,14 @@ static void sifive_u_machine_init(MachineState *machine)
         0x00000000,
                                        /* fw_dyn: */
     };
+    if (riscv_is_32_bit(machine)) {
+        reset_vec[4] = 0x0202a583;     /*     lw     a1, 32(t0) */
+        reset_vec[5] = 0x0182a283;     /*     lw     t0, 24(t0) */
+    } else {
+        reset_vec[4] = 0x0202b583;     /*     ld     a1, 32(t0) */
+        reset_vec[5] = 0x0182b283;     /*     ld     t0, 24(t0) */
+    }
+
 
     /* copy in the reset vector in little_endian byte order */
     for (i = 0; i < ARRAY_SIZE(reset_vec); i++) {
Signature · 1 line
2.29.2
#13 lore raw

PATCH v3 9/15 target/riscv: fpu_helper: Match function defs in HELPER macros

In reply to Alistair Francis

The helper functions defined in helper.h specify that the argument is of type target_long. Let's change the implementation to match the header definition.

---
 target/riscv/fpu_helper.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
target/riscv/fpu_helper.c +8 -8
index bb346a8249..507d7fe7fa 100644
@@ -224,13 +224,13 @@ target_ulong helper_fcvt_wu_s(CPURISCVState *env, uint64_t rs1)
 }
 
 #if defined(TARGET_RISCV64)
-uint64_t helper_fcvt_l_s(CPURISCVState *env, uint64_t rs1)
+target_ulong helper_fcvt_l_s(CPURISCVState *env, uint64_t rs1)
 {
     float32 frs1 = check_nanbox_s(rs1);
     return float32_to_int64(frs1, &env->fp_status);
 }
 
-uint64_t helper_fcvt_lu_s(CPURISCVState *env, uint64_t rs1)
+target_ulong helper_fcvt_lu_s(CPURISCVState *env, uint64_t rs1)
 {
     float32 frs1 = check_nanbox_s(rs1);
     return float32_to_uint64(frs1, &env->fp_status);
@@ -248,12 +248,12 @@ uint64_t helper_fcvt_s_wu(CPURISCVState *env, target_ulong rs1)
 }
 
 #if defined(TARGET_RISCV64)
-uint64_t helper_fcvt_s_l(CPURISCVState *env, uint64_t rs1)
+uint64_t helper_fcvt_s_l(CPURISCVState *env, target_ulong rs1)
 {
     return nanbox_s(int64_to_float32(rs1, &env->fp_status));
 }
 
-uint64_t helper_fcvt_s_lu(CPURISCVState *env, uint64_t rs1)
+uint64_t helper_fcvt_s_lu(CPURISCVState *env, target_ulong rs1)
 {
     return nanbox_s(uint64_to_float32(rs1, &env->fp_status));
 }
@@ -337,12 +337,12 @@ target_ulong helper_fcvt_wu_d(CPURISCVState *env, uint64_t frs1)
 }
 
 #if defined(TARGET_RISCV64)
-uint64_t helper_fcvt_l_d(CPURISCVState *env, uint64_t frs1)
+target_ulong helper_fcvt_l_d(CPURISCVState *env, uint64_t frs1)
 {
     return float64_to_int64(frs1, &env->fp_status);
 }
 
-uint64_t helper_fcvt_lu_d(CPURISCVState *env, uint64_t frs1)
+target_ulong helper_fcvt_lu_d(CPURISCVState *env, uint64_t frs1)
 {
     return float64_to_uint64(frs1, &env->fp_status);
 }
@@ -359,12 +359,12 @@ uint64_t helper_fcvt_d_wu(CPURISCVState *env, target_ulong rs1)
 }
 
 #if defined(TARGET_RISCV64)
-uint64_t helper_fcvt_d_l(CPURISCVState *env, uint64_t rs1)
+uint64_t helper_fcvt_d_l(CPURISCVState *env, target_ulong rs1)
 {
     return int64_to_float64(rs1, &env->fp_status);
 }
 
-uint64_t helper_fcvt_d_lu(CPURISCVState *env, uint64_t rs1)
+uint64_t helper_fcvt_d_lu(CPURISCVState *env, target_ulong rs1)
 {
     return uint64_to_float64(rs1, &env->fp_status);
 }
Signature · 1 line
2.29.2
#14 lore raw

Re: [PATCH v3 09/15] target/riscv: fpu_helper: Match function defs in HELPER macros

Hi Alistair,

Quoted 2 lines · Alistair Francis

The helper functions defined in helper.h specify that the argument is of

I can't find the helper.h that declare these functions?

Quoted 13 lines

type target_long. Let's change the implementation to match the header definition.

---
 target/riscv/fpu_helper.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
target/riscv/fpu_helper.c +0 -0
index bb346a8249..507d7fe7fa 100644

target/riscv/fpu_helper.c target_ulong helper_fcvt_wu_s(CPURISCVState *env, uint64_t rs1) · line 230

Quoted 8 lines
target/riscv/fpu_helper.c +1 -1
@@ -224,13 +224,13 @@ target_ulong helper_fcvt_wu_s(CPURISCVState *env, uint64_t rs1)
 }
 
 #if defined(TARGET_RISCV64)
-uint64_t helper_fcvt_l_s(CPURISCVState *env, uint64_t rs1)
+target_ulong helper_fcvt_l_s(CPURISCVState *env, uint64_t rs1)
 {
     float32 frs1 = check_nanbox_s(rs1);
     return float32_to_int64(frs1, &env->fp_status);

float32_to_int64() returns int64_t, so there is a truncation if changing it to target_ulong for 32-bit.

Quoted 42 lines
target/riscv/fpu_helper.c +5 -6
 }
 
-uint64_t helper_fcvt_lu_s(CPURISCVState *env, uint64_t rs1)
+target_ulong helper_fcvt_lu_s(CPURISCVState *env, uint64_t rs1)
 {
     float32 frs1 = check_nanbox_s(rs1);
     return float32_to_uint64(frs1, &env->fp_status);
@@ -248,12 +248,12 @@ uint64_t helper_fcvt_s_wu(CPURISCVState *env, target_ulong rs1)
 }
 
 #if defined(TARGET_RISCV64)
-uint64_t helper_fcvt_s_l(CPURISCVState *env, uint64_t rs1)
+uint64_t helper_fcvt_s_l(CPURISCVState *env, target_ulong rs1)
 {
     return nanbox_s(int64_to_float32(rs1, &env->fp_status));
 }
 
-uint64_t helper_fcvt_s_lu(CPURISCVState *env, uint64_t rs1)
+uint64_t helper_fcvt_s_lu(CPURISCVState *env, target_ulong rs1)
 {
     return nanbox_s(uint64_to_float32(rs1, &env->fp_status));
 }
@@ -337,12 +337,12 @@ target_ulong helper_fcvt_wu_d(CPURISCVState *env, uint64_t frs1)
 }
 
 #if defined(TARGET_RISCV64)
-uint64_t helper_fcvt_l_d(CPURISCVState *env, uint64_t frs1)
+target_ulong helper_fcvt_l_d(CPURISCVState *env, uint64_t frs1)
 {
     return float64_to_int64(frs1, &env->fp_status);
 }
 
-uint64_t helper_fcvt_lu_d(CPURISCVState *env, uint64_t frs1)
+target_ulong helper_fcvt_lu_d(CPURISCVState *env, uint64_t frs1)
 {
     return float64_to_uint64(frs1, &env->fp_status);
 }
@@ -359,12 +359,12 @@ uint64_t helper_fcvt_d_wu(CPURISCVState *env, target_ulong rs1)
 }
 
 #if defined(TARGET_RISCV64)
-uint64_t helper_fcvt_d_l(CPURISCVState *env, uint64_t rs1)

target/riscv/fpu_helper.c uint64_t helper_fcvt_d_wu(CPURISCVState *env, target_ulong rs1) · line 370

Quoted 10 lines
target/riscv/fpu_helper.c +2 -1
+uint64_t helper_fcvt_d_l(CPURISCVState *env, target_ulong rs1)
 {
     return int64_to_float64(rs1, &env->fp_status);
 }
 
-uint64_t helper_fcvt_d_lu(CPURISCVState *env, uint64_t rs1)
+uint64_t helper_fcvt_d_lu(CPURISCVState *env, target_ulong rs1)
 {
     return uint64_to_float64(rs1, &env->fp_status);
 }

Regards,
Bin

#15 lore raw

Re: [PATCH v3 09/15] target/riscv: fpu_helper: Match function defs in HELPER macros

Quoted 9 lines · Bin Meng

target/riscv/fpu_helper.c target_ulong helper_fcvt_wu_s(CPURISCVState *env, uint64_t rs1) · line 230

Quoted 6 lines

#if defined(TARGET_RISCV64)

target/riscv/fpu_helper.c +1 -1
-uint64_t helper_fcvt_l_s(CPURISCVState *env, uint64_t rs1)
+target_ulong helper_fcvt_l_s(CPURISCVState *env, uint64_t rs1)
 {
     float32 frs1 = check_nanbox_s(rs1);
     return float32_to_int64(frs1, &env->fp_status);

float32_to_int64() returns int64_t, so there is a truncation if changing it to target_ulong for 32-bit.

There's not, because this function isn't defined for 32-bit (see first quoted line). But this point of confusion is exactly what I pointed out vs the previous revision.

r~

#16 lore raw

Re: [PATCH v3 09/15] target/riscv: fpu_helper: Match function defs in HELPER macros

Quoted 12 lines · Richard Henderson
Quoted 9 lines · Bin Meng

target/riscv/fpu_helper.c target_ulong helper_fcvt_wu_s(CPURISCVState *env, uint64_t rs1) · line 230

Quoted 6 lines

#if defined(TARGET_RISCV64)

target/riscv/fpu_helper.c +1 -1
-uint64_t helper_fcvt_l_s(CPURISCVState *env, uint64_t rs1)
+target_ulong helper_fcvt_l_s(CPURISCVState *env, uint64_t rs1)
 {
     float32 frs1 = check_nanbox_s(rs1);
     return float32_to_int64(frs1, &env->fp_status);

float32_to_int64() returns int64_t, so there is a truncation if changing it to target_ulong for 32-bit.

Quoted 3 lines

There's not, because this function isn't defined for 32-bit (see first quoted line). But this point of confusion is exactly what I pointed out vs the previous revision.

Ok, I have swapped this to changing helper.h now.

Alistair

Quoted 3 lines

r~

#17 lore raw

PATCH v3 10/15 target/riscv: Add a riscv_cpu_is_32bit() helper function

In reply to Alistair Francis
---
 target/riscv/cpu.h | 2 ++
 target/riscv/cpu.c | 9 +++++++++
 2 files changed, 11 insertions(+)
target/riscv/cpu.h +2 -0
index 9c064f3094..6339e84819 100644
@@ -384,6 +384,8 @@ FIELD(TB_FLAGS, VILL, 8, 1)
 /* Is a Hypervisor instruction load/store allowed? */
 FIELD(TB_FLAGS, HLSX, 9, 1)
 
+bool riscv_cpu_is_32bit(CPURISCVState *env);
+
 /*
  * A simplification for VLMAX
  * = (1 << LMUL) * VLEN / (8 * (1 << SEW))
target/riscv/cpu.c +9 -0
index 6a0264fc6b..32a6916b8a 100644
@@ -108,6 +108,15 @@ const char *riscv_cpu_get_trap_name(target_ulong cause, bool async)
     }
 }
 
+bool riscv_cpu_is_32bit(CPURISCVState *env)
+{
+    if (env->misa & RV64) {
+        return false;
+    }
+
+    return true;
+}
+
 static void set_misa(CPURISCVState *env, target_ulong misa)
 {
     env->misa_mask = env->misa = misa;
Signature · 1 line
2.29.2
#18 lore raw

PATCH v3 11/15 target/riscv: Specify the XLEN for CPUs

In reply to Alistair Francis
---
 target/riscv/cpu.c | 33 +++++++++++++++++++++++----------
 1 file changed, 23 insertions(+), 10 deletions(-)
target/riscv/cpu.c +23 -10
index 32a6916b8a..7d6f032122 100644
@@ -158,22 +158,36 @@ static void riscv_base_cpu_init(Object *obj)
     set_misa(env, 0);
 }
 
-static void rvxx_sifive_u_cpu_init(Object *obj)
+#ifdef TARGET_RISCV64
+static void rv64_sifive_u_cpu_init(Object *obj)
 {
     CPURISCVState *env = &RISCV_CPU(obj)->env;
-    set_misa(env, RVXLEN | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
+    set_misa(env, RV64 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
     set_priv_version(env, PRIV_VERSION_1_10_0);
 }
 
-static void rvxx_sifive_e_cpu_init(Object *obj)
+static void rv64_sifive_e_cpu_init(Object *obj)
 {
     CPURISCVState *env = &RISCV_CPU(obj)->env;
-    set_misa(env, RVXLEN | RVI | RVM | RVA | RVC | RVU);
+    set_misa(env, RV64 | RVI | RVM | RVA | RVC | RVU);
     set_priv_version(env, PRIV_VERSION_1_10_0);
     qdev_prop_set_bit(DEVICE(obj), "mmu", false);
 }
+#else
+static void rv32_sifive_u_cpu_init(Object *obj)
+{
+    CPURISCVState *env = &RISCV_CPU(obj)->env;
+    set_misa(env, RV32 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
+    set_priv_version(env, PRIV_VERSION_1_10_0);
+}
 
-#if defined(TARGET_RISCV32)
+static void rv32_sifive_e_cpu_init(Object *obj)
+{
+    CPURISCVState *env = &RISCV_CPU(obj)->env;
+    set_misa(env, RV32 | RVI | RVM | RVA | RVC | RVU);
+    set_priv_version(env, PRIV_VERSION_1_10_0);
+    qdev_prop_set_bit(DEVICE(obj), "mmu", false);
+}
 
 static void rv32_ibex_cpu_init(Object *obj)
 {
@@ -191,7 +205,6 @@ static void rv32_imafcu_nommu_cpu_init(Object *obj)
     set_resetvec(env, DEFAULT_RSTVEC);
     qdev_prop_set_bit(DEVICE(obj), "mmu", false);
 }
-
 #endif
 
 static ObjectClass *riscv_cpu_class_by_name(const char *cpu_model)
@@ -643,13 +656,13 @@ static const TypeInfo riscv_cpu_type_infos[] = {
 #if defined(TARGET_RISCV32)
     DEFINE_CPU(TYPE_RISCV_CPU_BASE32,           riscv_base_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_IBEX,             rv32_ibex_cpu_init),
-    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31,       rvxx_sifive_e_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31,       rv32_sifive_e_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E34,       rv32_imafcu_nommu_cpu_init),
-    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34,       rvxx_sifive_u_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34,       rv32_sifive_u_cpu_init),
 #elif defined(TARGET_RISCV64)
     DEFINE_CPU(TYPE_RISCV_CPU_BASE64,           riscv_base_cpu_init),
-    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E51,       rvxx_sifive_e_cpu_init),
-    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U54,       rvxx_sifive_u_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E51,       rv64_sifive_e_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U54,       rv64_sifive_u_cpu_init),
 #endif
 };
 
Signature · 1 line
2.29.2
#19 lore raw

PATCH v3 12/15 target/riscv: cpu: Remove compile time XLEN checks

In reply to Alistair Francis
---
 target/riscv/cpu.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)
target/riscv/cpu.c +10 -9
index 7d6f032122..47b738c314 100644
@@ -240,10 +240,10 @@ static void riscv_cpu_dump_state(CPUState *cs, FILE *f, int flags)
 #ifndef CONFIG_USER_ONLY
     qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "mhartid ", env->mhartid);
     qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "mstatus ", (target_ulong)env->mstatus);
-#ifdef TARGET_RISCV32
-    qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "mstatush ",
-                 (target_ulong)(env->mstatus >> 32));
-#endif
+    if (riscv_cpu_is_32bit(env)) {
+        qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "mstatush ",
+                     (target_ulong)(env->mstatus >> 32));
+    }
     if (riscv_has_ext(env, RVH)) {
         qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "hstatus ", env->hstatus);
         qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "vsstatus ",
@@ -356,11 +356,12 @@ static void riscv_cpu_reset(DeviceState *dev)
 
 static void riscv_cpu_disas_set_info(CPUState *s, disassemble_info *info)
 {
-#if defined(TARGET_RISCV32)
-    info->print_insn = print_insn_riscv32;
-#elif defined(TARGET_RISCV64)
-    info->print_insn = print_insn_riscv64;
-#endif
+    RISCVCPU *cpu = RISCV_CPU(s);
+    if (riscv_cpu_is_32bit(&cpu->env)) {
+        info->print_insn = print_insn_riscv32;
+    } else {
+        info->print_insn = print_insn_riscv64;
+    }
 }
 
 static void riscv_cpu_realize(DeviceState *dev, Error **errp)
Signature · 1 line
2.29.2
#20 lore raw

PATCH v3 13/15 target/riscv: cpu_helper: Remove compile time XLEN checks

In reply to Alistair Francis
---
 target/riscv/cpu_helper.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
target/riscv/cpu_helper.c +7 -5
index a2787b1d48..1fc9273cea 100644
@@ -446,11 +446,13 @@ restart:
             return TRANSLATE_PMP_FAIL;
         }
 
-#if defined(TARGET_RISCV32)
-        target_ulong pte = address_space_ldl(cs->as, pte_addr, attrs, &res);
-#elif defined(TARGET_RISCV64)
-        target_ulong pte = address_space_ldq(cs->as, pte_addr, attrs, &res);
-#endif
+        target_ulong pte;
+        if (riscv_cpu_is_32bit(env)) {
+            pte = address_space_ldl(cs->as, pte_addr, attrs, &res);
+        } else {
+            pte = address_space_ldq(cs->as, pte_addr, attrs, &res);
+        }
+
         if (res != MEMTX_OK) {
             return TRANSLATE_FAIL;
         }
Signature · 1 line
2.29.2
#21 lore raw

PATCH v3 14/15 target/riscv: csr: Remove compile time XLEN checks

In reply to Alistair Francis
---
 target/riscv/cpu_bits.h |   4 +-
 target/riscv/csr.c      | 176 +++++++++++++++++++++-------------------
 2 files changed, 92 insertions(+), 88 deletions(-)
target/riscv/cpu_bits.h +1 -3
index 24b24c69c5..1337269ae8 100644
@@ -437,9 +437,7 @@
 #define HSTATUS_VGEIN        0x0003F000
 #define HSTATUS_VTVM         0x00100000
 #define HSTATUS_VTSR         0x00400000
-#if defined(TARGET_RISCV64)
-#define HSTATUS_VSXL        0x300000000
-#endif
+#define HSTATUS_VSXL         0x300000000
 
 #define HSTATUS32_WPRI       0xFF8FF87E
 #define HSTATUS64_WPRI       0xFFFFFFFFFF8FF87EULL
target/riscv/csr.c +91 -85

342 lines not on this page · raw message

Signature · 1 line
2.29.2
Reviewed-by on v3 14/15
#22 lore raw

Re: [PATCH v3 14/15] target/riscv: csr: Remove compile time XLEN checks

Quoted 324 lines · Alistair Francis
---
 target/riscv/cpu_bits.h |   4 +-
 target/riscv/csr.c      | 176 +++++++++++++++++++++-------------------
 2 files changed, 92 insertions(+), 88 deletions(-)
target/riscv/cpu_bits.h +1 -3
index 24b24c69c5..1337269ae8 100644
@@ -437,9 +437,7 @@
 #define HSTATUS_VGEIN        0x0003F000
 #define HSTATUS_VTVM         0x00100000
 #define HSTATUS_VTSR         0x00400000
-#if defined(TARGET_RISCV64)
-#define HSTATUS_VSXL        0x300000000
-#endif
+#define HSTATUS_VSXL         0x300000000
 
 #define HSTATUS32_WPRI       0xFF8FF87E
 #define HSTATUS64_WPRI       0xFFFFFFFFFF8FF87EULL
target/riscv/csr.c +82 -64
index 93263f8e06..63b818c1dd 100644
@@ -102,44 +102,65 @@ static int ctr(CPURISCVState *env, int csrno)
                 return -RISCV_EXCP_VIRT_INSTRUCTION_FAULT;
             }
             break;
-#if defined(TARGET_RISCV32)
-        case CSR_CYCLEH:
-            if (!get_field(env->hcounteren, HCOUNTEREN_CY) &&
-                get_field(env->mcounteren, HCOUNTEREN_CY)) {
-                return -RISCV_EXCP_VIRT_INSTRUCTION_FAULT;
-            }
-            break;
-        case CSR_TIMEH:
-            if (!get_field(env->hcounteren, HCOUNTEREN_TM) &&
-                get_field(env->mcounteren, HCOUNTEREN_TM)) {
-                return -RISCV_EXCP_VIRT_INSTRUCTION_FAULT;
-            }
-            break;
-        case CSR_INSTRETH:
-            if (!get_field(env->hcounteren, HCOUNTEREN_IR) &&
-                get_field(env->mcounteren, HCOUNTEREN_IR)) {
-                return -RISCV_EXCP_VIRT_INSTRUCTION_FAULT;
-            }
-            break;
-        case CSR_HPMCOUNTER3H...CSR_HPMCOUNTER31H:
-            if (!get_field(env->hcounteren, 1 << (csrno - CSR_HPMCOUNTER3H)) &&
-                get_field(env->mcounteren, 1 << (csrno - CSR_HPMCOUNTER3H))) {
-                return -RISCV_EXCP_VIRT_INSTRUCTION_FAULT;
+        }
+        if (riscv_cpu_is_32bit(env)) {
+            switch (csrno) {
+            case CSR_CYCLEH:
+                if (!get_field(env->hcounteren, HCOUNTEREN_CY) &&
+                    get_field(env->mcounteren, HCOUNTEREN_CY)) {
+                    return -RISCV_EXCP_VIRT_INSTRUCTION_FAULT;
+                }
+                break;
+            case CSR_TIMEH:
+                if (!get_field(env->hcounteren, HCOUNTEREN_TM) &&
+                    get_field(env->mcounteren, HCOUNTEREN_TM)) {
+                    return -RISCV_EXCP_VIRT_INSTRUCTION_FAULT;
+                }
+                break;
+            case CSR_INSTRETH:
+                if (!get_field(env->hcounteren, HCOUNTEREN_IR) &&
+                    get_field(env->mcounteren, HCOUNTEREN_IR)) {
+                    return -RISCV_EXCP_VIRT_INSTRUCTION_FAULT;
+                }
+                break;
+            case CSR_HPMCOUNTER3H...CSR_HPMCOUNTER31H:
+                if (!get_field(env->hcounteren, 1 << (csrno - CSR_HPMCOUNTER3H)) &&
+                    get_field(env->mcounteren, 1 << (csrno - CSR_HPMCOUNTER3H))) {
+                    return -RISCV_EXCP_VIRT_INSTRUCTION_FAULT;
+                }
+                break;
             }
-            break;
-#endif
         }
     }
 #endif
     return 0;
 }
 
+static int ctr32(CPURISCVState *env, int csrno)
+{
+    if (!riscv_cpu_is_32bit(env)) {
+        return -RISCV_EXCP_ILLEGAL_INST;
+    }
+
+    return ctr(env, csrno);
+}
+
 #if !defined(CONFIG_USER_ONLY)
 static int any(CPURISCVState *env, int csrno)
 {
     return 0;
 }
 
+static int any32(CPURISCVState *env, int csrno)
+{
+    if (!riscv_cpu_is_32bit(env)) {
+        return -RISCV_EXCP_ILLEGAL_INST;
+    }
+
+    return any(env, csrno);
+
+}
+
 static int smode(CPURISCVState *env, int csrno)
 {
     return -!riscv_has_ext(env, RVS);
@@ -161,6 +182,16 @@ static int hmode(CPURISCVState *env, int csrno)
     return -RISCV_EXCP_ILLEGAL_INST;
 }
 
+static int hmode32(CPURISCVState *env, int csrno)
+{
+    if (!riscv_cpu_is_32bit(env)) {
+        return 0;
+    }
+
+    return hmode(env, csrno);
+
+}
+
 static int pmp(CPURISCVState *env, int csrno)
 {
     return -!riscv_feature(env, RISCV_FEATURE_PMP);
@@ -310,7 +341,6 @@ static int read_instret(CPURISCVState *env, int csrno, target_ulong *val)
     return 0;
 }
 
-#if defined(TARGET_RISCV32)
 static int read_instreth(CPURISCVState *env, int csrno, target_ulong *val)
 {
 #if !defined(CONFIG_USER_ONLY)
@@ -324,7 +354,6 @@ static int read_instreth(CPURISCVState *env, int csrno, target_ulong *val)
 #endif
     return 0;
 }
-#endif /* TARGET_RISCV32 */
 
 #if defined(CONFIG_USER_ONLY)
 static int read_time(CPURISCVState *env, int csrno, target_ulong *val)
@@ -333,13 +362,11 @@ static int read_time(CPURISCVState *env, int csrno, target_ulong *val)
     return 0;
 }
 
-#if defined(TARGET_RISCV32)
 static int read_timeh(CPURISCVState *env, int csrno, target_ulong *val)
 {
     *val = cpu_get_host_ticks() >> 32;
     return 0;
 }
-#endif
 
 #else /* CONFIG_USER_ONLY */
 
@@ -355,7 +382,6 @@ static int read_time(CPURISCVState *env, int csrno, target_ulong *val)
     return 0;
 }
 
-#if defined(TARGET_RISCV32)
 static int read_timeh(CPURISCVState *env, int csrno, target_ulong *val)
 {
     uint64_t delta = riscv_cpu_virt_enabled(env) ? env->htimedelta : 0;
@@ -367,7 +393,6 @@ static int read_timeh(CPURISCVState *env, int csrno, target_ulong *val)
     *val = (env->rdtime_fn(env->rdtime_fn_arg) + delta) >> 32;
     return 0;
 }
-#endif
 
 /* Machine constants */
 
@@ -406,19 +431,17 @@ static const target_ulong sip_writable_mask = SIP_SSIP | MIP_USIP | MIP_UEIP;
 static const target_ulong hip_writable_mask = MIP_VSSIP | MIP_VSTIP | MIP_VSEIP;
 static const target_ulong vsip_writable_mask = MIP_VSSIP;
 
-#if defined(TARGET_RISCV32)
-static const char valid_vm_1_10[16] = {
+static const char valid_vm_1_10_32[16] = {
     [VM_1_10_MBARE] = 1,
     [VM_1_10_SV32] = 1
 };
-#elif defined(TARGET_RISCV64)
-static const char valid_vm_1_10[16] = {
+
+static const char valid_vm_1_10_64[16] = {
     [VM_1_10_MBARE] = 1,
     [VM_1_10_SV39] = 1,
     [VM_1_10_SV48] = 1,
     [VM_1_10_SV57] = 1
 };
-#endif /* CONFIG_USER_ONLY */
 
 /* Machine Information Registers */
 static int read_zero(CPURISCVState *env, int csrno, target_ulong *val)
@@ -441,7 +464,11 @@ static int read_mstatus(CPURISCVState *env, int csrno, target_ulong *val)
 
 static int validate_vm(CPURISCVState *env, target_ulong vm)
 {
-    return valid_vm_1_10[vm & 0xf];
+    if (riscv_cpu_is_32bit(env)) {
+        return valid_vm_1_10_32[vm & 0xf];
+    } else {
+        return valid_vm_1_10_64[vm & 0xf];
+    }
 }
 
 static int write_mstatus(CPURISCVState *env, int csrno, target_ulong val)
@@ -459,13 +486,14 @@ static int write_mstatus(CPURISCVState *env, int csrno, target_ulong val)
         MSTATUS_SPP | MSTATUS_FS | MSTATUS_MPRV | MSTATUS_SUM |
         MSTATUS_MPP | MSTATUS_MXR | MSTATUS_TVM | MSTATUS_TSR |
         MSTATUS_TW;
-#if defined(TARGET_RISCV64)
-    /*
-     * RV32: MPV and GVA are not in mstatus. The current plan is to
-     * add them to mstatush. For now, we just don't support it.
-     */
-    mask |= MSTATUS_MPV | MSTATUS_GVA;
-#endif
+
+    if (!riscv_cpu_is_32bit(env)) {
+        /*
+         * RV32: MPV and GVA are not in mstatus. The current plan is to
+         * add them to mstatush. For now, we just don't support it.
+         */
+        mask |= MSTATUS_MPV | MSTATUS_GVA;
+    }
 
     mstatus = (mstatus & ~mask) | (val & mask);
 
@@ -477,7 +505,6 @@ static int write_mstatus(CPURISCVState *env, int csrno, target_ulong val)
     return 0;
 }
 
-#ifdef TARGET_RISCV32
 static int read_mstatush(CPURISCVState *env, int csrno, target_ulong *val)
 {
     *val = env->mstatus >> 32;
@@ -497,7 +524,6 @@ static int write_mstatush(CPURISCVState *env, int csrno, target_ulong val)
 
     return 0;
 }
-#endif
 
 static int read_misa(CPURISCVState *env, int csrno, target_ulong *val)
 {
@@ -895,10 +921,10 @@ static int write_satp(CPURISCVState *env, int csrno, target_ulong val)
 static int read_hstatus(CPURISCVState *env, int csrno, target_ulong *val)
 {
     *val = env->hstatus;
-#ifdef TARGET_RISCV64
-    /* We only support 64-bit VSXL */
-    *val = set_field(*val, HSTATUS_VSXL, 2);
-#endif
+    if (!riscv_cpu_is_32bit(env)) {
+        /* We only support 64-bit VSXL */
+        *val = set_field(*val, HSTATUS_VSXL, 2);
+    }
     /* We only support little endian */
     *val = set_field(*val, HSTATUS_VSBE, 0);
     return 0;
@@ -907,11 +933,9 @@ static int read_hstatus(CPURISCVState *env, int csrno, target_ulong *val)
 static int write_hstatus(CPURISCVState *env, int csrno, target_ulong val)
 {
     env->hstatus = val;
-#ifdef TARGET_RISCV64
-    if (get_field(val, HSTATUS_VSXL) != 2) {
+    if (!riscv_cpu_is_32bit(env) && get_field(val, HSTATUS_VSXL) != 2) {
         qemu_log_mask(LOG_UNIMP, "QEMU does not support mixed HSXLEN options.");
     }
-#endif
     if (get_field(val, HSTATUS_VSBE) != 0) {
         qemu_log_mask(LOG_UNIMP, "QEMU does not support big endian guests.");
     }
@@ -1053,11 +1077,7 @@ static int read_htimedelta(CPURISCVState *env, int csrno, target_ulong *val)
         return -RISCV_EXCP_ILLEGAL_INST;
     }
 
-#if defined(TARGET_RISCV32)
-    *val = env->htimedelta & 0xffffffff;
-#else
     *val = env->htimedelta;
-#endif
     return 0;
 }
 
@@ -1067,15 +1087,14 @@ static int write_htimedelta(CPURISCVState *env, int csrno, target_ulong val)
         return -RISCV_EXCP_ILLEGAL_INST;
     }
 
-#if defined(TARGET_RISCV32)
-    env->htimedelta = deposit64(env->htimedelta, 0, 32, (uint64_t)val);
-#else
-    env->htimedelta = val;
-#endif
+    if (riscv_cpu_is_32bit(env)) {
+        env->htimedelta = deposit64(env->htimedelta, 0, 32, (uint64_t)val);
+    } else {
+        env->htimedelta = val;
+    }
     return 0;
 }
 
-#if defined(TARGET_RISCV32)
 static int read_htimedeltah(CPURISCVState *env, int csrno, target_ulong *val)
 {
     if (!env->rdtime_fn) {
@@ -1095,7 +1114,6 @@ static int write_htimedeltah(CPURISCVState *env, int csrno, target_ulong val)
     env->htimedelta = deposit64(env->htimedelta, 32, 32, (uint64_t)val);
     return 0;
 }
-#endif
 
 /* Virtual CSR Registers */
 static int read_vsstatus(CPURISCVState *env, int csrno, target_ulong *val)

target/riscv/csr.c static riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { · line 1396

Quoted 9 lines
target/riscv/csr.c +2 -4
@@ -1374,26 +1392,20 @@ static riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = {
     /* User Timers and Counters */
     [CSR_CYCLE] =               { ctr,  read_instret                        },
     [CSR_INSTRET] =             { ctr,  read_instret                        },
-#if defined(TARGET_RISCV32)
-    [CSR_CYCLEH] =              { ctr,  read_instreth                       },
-    [CSR_INSTRETH] =            { ctr,  read_instreth                       },
-#endif
+    [CSR_CYCLEH] =              { ctr32,  read_instreth                       },
+    [CSR_INSTRETH] =            { ctr32,  read_instreth                       },

nits: please keep all the right } aligned

Quoted 46 lines
target/riscv/csr.c +5 -13
     /* In privileged mode, the monitor will have to emulate TIME CSRs only if
      * rdtime callback is not provided by machine/platform emulation */
     [CSR_TIME] =                { ctr,  read_time                           },
-#if defined(TARGET_RISCV32)
-    [CSR_TIMEH] =               { ctr,  read_timeh                          },
-#endif
+    [CSR_TIMEH] =               { ctr32,  read_timeh                          },
 
 #if !defined(CONFIG_USER_ONLY)
     /* Machine Timers and Counters */
     [CSR_MCYCLE] =              { any,  read_instret                        },
     [CSR_MINSTRET] =            { any,  read_instret                        },
-#if defined(TARGET_RISCV32)
-    [CSR_MCYCLEH] =             { any,  read_instreth                       },
-    [CSR_MINSTRETH] =           { any,  read_instreth                       },
-#endif
+    [CSR_MCYCLEH] =             { any32,  read_instreth                       },
+    [CSR_MINSTRETH] =           { any32,  read_instreth                       },
 
     /* Machine Information Registers */
     [CSR_MVENDORID] =           { any,  read_zero                           },
@@ -1410,9 +1422,7 @@ static riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = {
     [CSR_MTVEC] =               { any,  read_mtvec,       write_mtvec       },
     [CSR_MCOUNTEREN] =          { any,  read_mcounteren,  write_mcounteren  },
 
-#if defined(TARGET_RISCV32)
-    [CSR_MSTATUSH] =            { any,  read_mstatush,    write_mstatush    },
-#endif
+    [CSR_MSTATUSH] =            { any32,  read_mstatush,    write_mstatush    },
 
     [CSR_MSCOUNTEREN] =         { any,  read_mscounteren, write_mscounteren },
 
@@ -1452,9 +1462,7 @@ static riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = {
     [CSR_HGEIP] =               { hmode,   read_hgeip,       write_hgeip      },
     [CSR_HGATP] =               { hmode,   read_hgatp,       write_hgatp      },
     [CSR_HTIMEDELTA] =          { hmode,   read_htimedelta,  write_htimedelta },
-#if defined(TARGET_RISCV32)
-    [CSR_HTIMEDELTAH] =         { hmode,   read_htimedeltah, write_htimedeltah},
-#endif
+    [CSR_HTIMEDELTAH] =         { hmode32,   read_htimedeltah, write_htimedeltah},
 
     [CSR_VSSTATUS] =            { hmode,   read_vsstatus,    write_vsstatus   },
     [CSR_VSIP] =                { hmode,   NULL,     NULL,     rmw_vsip       },
@@ -1477,9 +1485,7 @@ static riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = {
     [CSR_HPMCOUNTER3   ... CSR_HPMCOUNTER31] =    { ctr,  read_zero          },

target/riscv/csr.c static riscv_csr_operations csr_ops[CSR_TABLE_SIZE] = { · line 1491

Quoted 10 lines
target/riscv/csr.c +2 -4
     [CSR_MHPMCOUNTER3  ... CSR_MHPMCOUNTER31] =   { any,  read_zero          },
     [CSR_MHPMEVENT3    ... CSR_MHPMEVENT31] =     { any,  read_zero          },
-#if defined(TARGET_RISCV32)
-    [CSR_HPMCOUNTER3H  ... CSR_HPMCOUNTER31H] =   { ctr,  read_zero          },
-    [CSR_MHPMCOUNTER3H ... CSR_MHPMCOUNTER31H] =  { any,  read_zero          },
-#endif
+    [CSR_HPMCOUNTER3H  ... CSR_HPMCOUNTER31H] =   { ctr32,  read_zero          },
+    [CSR_MHPMCOUNTER3H ... CSR_MHPMCOUNTER31H] =  { any32,  read_zero          },
 #endif /* !CONFIG_USER_ONLY */
 };

Otherwise,

#23 lore raw

PATCH v3 15/15 target/riscv: cpu: Set XLEN independently from target

In reply to Alistair Francis
---
 target/riscv/cpu.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)
target/riscv/cpu.c +16 -9
index 47b738c314..254cd83f8b 100644
@@ -151,14 +151,14 @@ static void riscv_any_cpu_init(Object *obj)
     set_priv_version(env, PRIV_VERSION_1_11_0);
 }
 
-static void riscv_base_cpu_init(Object *obj)
+#if defined(TARGET_RISCV64)
+static void rv64_base_cpu_init(Object *obj)
 {
     CPURISCVState *env = &RISCV_CPU(obj)->env;
     /* We set this in the realise function */
-    set_misa(env, 0);
+    set_misa(env, RV64);
 }
 
-#ifdef TARGET_RISCV64
 static void rv64_sifive_u_cpu_init(Object *obj)
 {
     CPURISCVState *env = &RISCV_CPU(obj)->env;
@@ -174,6 +174,13 @@ static void rv64_sifive_e_cpu_init(Object *obj)
     qdev_prop_set_bit(DEVICE(obj), "mmu", false);
 }
 #else
+static void rv32_base_cpu_init(Object *obj)
+{
+    CPURISCVState *env = &RISCV_CPU(obj)->env;
+    /* We set this in the realise function */
+    set_misa(env, RV32);
+}
+
 static void rv32_sifive_u_cpu_init(Object *obj)
 {
     CPURISCVState *env = &RISCV_CPU(obj)->env;
@@ -372,7 +379,7 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp)
     RISCVCPUClass *mcc = RISCV_CPU_GET_CLASS(dev);
     int priv_version = PRIV_VERSION_1_11_0;
     int vext_version = VEXT_VERSION_0_07_1;
-    target_ulong target_misa = 0;
+    target_ulong target_misa = env->misa;
     Error *local_err = NULL;
 
     cpu_exec_realizefn(cs, &local_err);
@@ -407,8 +414,8 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp)
 
     set_resetvec(env, cpu->cfg.resetvec);
 
-    /* If misa isn't set (rv32 and rv64 machines) set it here */
-    if (!env->misa) {
+    /* If only XLEN is set for misa, then set misa from properties */
+    if (env->misa == RV32 || env->misa == RV64) {
         /* Do some ISA extension error checking */
         if (cpu->cfg.ext_i && cpu->cfg.ext_e) {
             error_setg(errp,
@@ -504,7 +511,7 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp)
             set_vext_version(env, vext_version);
         }
 
-        set_misa(env, RVXLEN | target_misa);
+        set_misa(env, target_misa);
     }
 
     riscv_cpu_register_gdb_regs_for_features(cs);
@@ -655,13 +662,13 @@ static const TypeInfo riscv_cpu_type_infos[] = {
     },
     DEFINE_CPU(TYPE_RISCV_CPU_ANY,              riscv_any_cpu_init),
 #if defined(TARGET_RISCV32)
-    DEFINE_CPU(TYPE_RISCV_CPU_BASE32,           riscv_base_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_BASE32,           rv32_base_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_IBEX,             rv32_ibex_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31,       rv32_sifive_e_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E34,       rv32_imafcu_nommu_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34,       rv32_sifive_u_cpu_init),
 #elif defined(TARGET_RISCV64)
-    DEFINE_CPU(TYPE_RISCV_CPU_BASE64,           riscv_base_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_BASE64,           rv64_base_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E51,       rv64_sifive_e_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U54,       rv64_sifive_u_cpu_init),
 #endif
Signature · 1 line
2.29.2