Skip to contentSkip to conversation

Misc OHCI clean ups

PATCH Superseded BALATON Zoltan 3 participants 13 messages Jan 16, 2022 – Jan 25, 2022

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover Misc OHCI clean ups

Hello,

I have these patches from last October when we've looked at what causes problems with mac99 and USB. We've found the main problem is likely not allowing pending packets per endpoint which we did not fix but these patches came out of debugging that and trying to improve the device model so eventually the real problem could be fixed more easily. So these are just clean ups and fixing one potential issue with isochronous transfers breaking pending async packet but it does not solve all problems OHCI currently has. I'm sending it anyway as I don't plan to work further on this so this series could be taken as is for now.

Regards,

BALATON Zoltan (5):
usb/ohci: Move trace point and log ep number to help debugging usb/ohci: Move cancelling async packet to ohci_stop_endpoints() usb/ohci: Move USBPortOps related functions together usb/ohci: Merge ohci_async_cancel_device() into ohci_child_detach() usb/ohci: Don't use packet from OHCIState for isochronous transfers

 hw/usb/hcd-ohci.c   | 295 +++++++++++++++++++++-----------------------
 hw/usb/trace-events |   2 +-
 2 files changed, 144 insertions(+), 153 deletions(-)
Signature · 1 line
2.30.2
#1 lore raw

PATCH 1/5 usb/ohci: Move trace point and log ep number to help debugging

---
 hw/usb/hcd-ohci.c   | 14 +++++++-------
 hw/usb/trace-events |  2 +-
 2 files changed, 8 insertions(+), 8 deletions(-)
hw/usb/hcd-ohci.c +7 -7
index a93d6b2e98..f915cc5473 100644
@@ -1033,21 +1033,21 @@ static int ohci_service_td(OHCIState *ohci, struct ohci_ed *ed)
         ohci->async_td = 0;
         ohci->async_complete = false;
     } else {
+        dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA));
+        if (dev == NULL) {
+            trace_usb_ohci_td_dev_error();
+            return 1;
+        }
+        ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN));
         if (ohci->async_td) {
             /* ??? The hardware should allow one active packet per
                endpoint.  We only allow one active packet per controller.
                This should be sufficient as long as devices respond in a
                timely manner.
             */
-            trace_usb_ohci_td_too_many_pending();
+            trace_usb_ohci_td_too_many_pending(ep->nr);
             return 1;
         }
-        dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA));
-        if (dev == NULL) {
-            trace_usb_ohci_td_dev_error();
-            return 1;
-        }
-        ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN));
         usb_packet_setup(&ohci->usb_packet, pid, ep, 0, addr, !flag_r,
                          OHCI_BM(td.flags, TD_DI) == 0);
         usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, pktlen);
hw/usb/trace-events +1 -1
index b8287b63f1..9773cb5330 100644
@@ -51,7 +51,7 @@ usb_ohci_td_skip_async(void) ""
 usb_ohci_td_pkt_hdr(uint32_t addr, int64_t pktlen, int64_t len, const char *s, int flag_r, uint32_t cbp, uint32_t be) " TD @ 0x%.8x %" PRId64 " of %" PRId64 " bytes %s r=%d cbp=0x%.8x be=0x%.8x"
 usb_ohci_td_pkt_short(const char *dir, const char *buf) "%s data: %s"
 usb_ohci_td_pkt_full(const char *dir, const char *buf) "%s data: %s"
-usb_ohci_td_too_many_pending(void) ""
+usb_ohci_td_too_many_pending(int ep) "ep=%d"
 usb_ohci_td_packet_status(int status) "status=%d"
 usb_ohci_ed_read_error(uint32_t addr) "ED read error at 0x%x"
 usb_ohci_ed_pkt(uint32_t cur, int h, int c, uint32_t head, uint32_t tail, uint32_t next) "ED @ 0x%.8x h=%u c=%u\n  head=0x%.8x tailp=0x%.8x next=0x%.8x"
Signature · 1 line
2.30.2
#2 lore raw

PATCH 2/5 usb/ohci: Move cancelling async packet to ohci_stop_endpoints()

In reply to BALATON Zoltan

This is always done before calling this function so remove duplicated code and do it within the function at one place.

---
 hw/usb/hcd-ohci.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)
hw/usb/hcd-ohci.c +4 -8
index f915cc5473..6d762973eb 100644
@@ -369,6 +369,10 @@ void ohci_stop_endpoints(OHCIState *ohci)
     USBDevice *dev;
     int i, j;
 
+    if (ohci->async_td) {
+        usb_cancel_packet(&ohci->usb_packet);
+        ohci->async_td = 0;
+    }
     for (i = 0; i < ohci->num_ports; i++) {
         dev = ohci->rhport[i].port.dev;
         if (dev && dev->attached) {
@@ -398,10 +402,6 @@ static void ohci_roothub_reset(OHCIState *ohci)
             usb_port_reset(&port->port);
         }
     }
-    if (ohci->async_td) {
-        usb_cancel_packet(&ohci->usb_packet);
-        ohci->async_td = 0;
-    }
     ohci_stop_endpoints(ohci);
 }
 
@@ -1277,10 +1277,6 @@ static void ohci_frame_boundary(void *opaque)
 
     /* Cancel all pending packets if either of the lists has been disabled.  */
     if (ohci->old_ctl & (~ohci->ctl) & (OHCI_CTL_BLE | OHCI_CTL_CLE)) {
-        if (ohci->async_td) {
-            usb_cancel_packet(&ohci->usb_packet);
-            ohci->async_td = 0;
-        }
         ohci_stop_endpoints(ohci);
     }
     ohci->old_ctl = ohci->ctl;
Signature · 1 line
2.30.2
#3 lore raw

PATCH 3/5 usb/ohci: Move USBPortOps related functions together

In reply to BALATON Zoltan

This also allows removing two forward declarations

---
 hw/usb/hcd-ohci.c | 204 +++++++++++++++++++++++-----------------------
 1 file changed, 100 insertions(+), 104 deletions(-)
hw/usb/hcd-ohci.c +100 -104
index 6d762973eb..d1907afd3f 100644
@@ -58,8 +58,6 @@ struct ohci_hcca {
 #define ED_WBACK_OFFSET offsetof(struct ohci_ed, head)
 #define ED_WBACK_SIZE   4
 
-static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev);
-
 /* Bitfields for the first word of an Endpoint Desciptor.  */
 #define OHCI_ED_FA_SHIFT  0
 #define OHCI_ED_FA_MASK   (0x7f<<OHCI_ED_FA_SHIFT)
@@ -261,92 +259,6 @@ static inline void ohci_set_interrupt(OHCIState *ohci, uint32_t intr)
     ohci_intr_update(ohci);
 }
 
-/* Attach or detach a device on a root hub port.  */
-static void ohci_attach(USBPort *port1)
-{
-    OHCIState *s = port1->opaque;
-    OHCIPort *port = &s->rhport[port1->index];
-    uint32_t old_state = port->ctrl;
-
-    /* set connect status */
-    port->ctrl |= OHCI_PORT_CCS | OHCI_PORT_CSC;
-
-    /* update speed */
-    if (port->port.dev->speed == USB_SPEED_LOW) {
-        port->ctrl |= OHCI_PORT_LSDA;
-    } else {
-        port->ctrl &= ~OHCI_PORT_LSDA;
-    }
-
-    /* notify of remote-wakeup */
-    if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) {
-        ohci_set_interrupt(s, OHCI_INTR_RD);
-    }
-
-    trace_usb_ohci_port_attach(port1->index);
-
-    if (old_state != port->ctrl) {
-        ohci_set_interrupt(s, OHCI_INTR_RHSC);
-    }
-}
-
-static void ohci_detach(USBPort *port1)
-{
-    OHCIState *s = port1->opaque;
-    OHCIPort *port = &s->rhport[port1->index];
-    uint32_t old_state = port->ctrl;
-
-    ohci_async_cancel_device(s, port1->dev);
-
-    /* set connect status */
-    if (port->ctrl & OHCI_PORT_CCS) {
-        port->ctrl &= ~OHCI_PORT_CCS;
-        port->ctrl |= OHCI_PORT_CSC;
-    }
-    /* disable port */
-    if (port->ctrl & OHCI_PORT_PES) {
-        port->ctrl &= ~OHCI_PORT_PES;
-        port->ctrl |= OHCI_PORT_PESC;
-    }
-    trace_usb_ohci_port_detach(port1->index);
-
-    if (old_state != port->ctrl) {
-        ohci_set_interrupt(s, OHCI_INTR_RHSC);
-    }
-}
-
-static void ohci_wakeup(USBPort *port1)
-{
-    OHCIState *s = port1->opaque;
-    OHCIPort *port = &s->rhport[port1->index];
-    uint32_t intr = 0;
-    if (port->ctrl & OHCI_PORT_PSS) {
-        trace_usb_ohci_port_wakeup(port1->index);
-        port->ctrl |= OHCI_PORT_PSSC;
-        port->ctrl &= ~OHCI_PORT_PSS;
-        intr = OHCI_INTR_RHSC;
-    }
-    /* Note that the controller can be suspended even if this port is not */
-    if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) {
-        trace_usb_ohci_remote_wakeup(s->name);
-        /* This is the one state transition the controller can do by itself */
-        s->ctl &= ~OHCI_CTL_HCFS;
-        s->ctl |= OHCI_USB_RESUME;
-        /* In suspend mode only ResumeDetected is possible, not RHSC:
-         * see the OHCI spec 5.1.2.3.
-         */
-        intr = OHCI_INTR_RD;
-    }
-    ohci_set_interrupt(s, intr);
-}
-
-static void ohci_child_detach(USBPort *port1, USBDevice *child)
-{
-    OHCIState *s = port1->opaque;
-
-    ohci_async_cancel_device(s, child);
-}
-
 static USBDevice *ohci_find_device(OHCIState *ohci, uint8_t addr)
 {
     USBDevice *dev;
@@ -634,17 +546,6 @@ static int ohci_copy_iso_td(OHCIState *ohci,
     return 0;
 }
 
-static void ohci_process_lists(OHCIState *ohci, int completion);
-
-static void ohci_async_complete_packet(USBPort *port, USBPacket *packet)
-{
-    OHCIState *ohci = container_of(packet, OHCIState, usb_packet);
-
-    trace_usb_ohci_async_complete();
-    ohci->async_complete = true;
-    ohci_process_lists(ohci, 1);
-}
-
 #define USUB(a, b) ((int16_t)((uint16_t)(a) - (uint16_t)(b)))
 
 static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed,
@@ -1789,6 +1690,41 @@ static void ohci_mem_write(void *opaque,
     }
 }
 
+static const MemoryRegionOps ohci_mem_ops = {
+    .read = ohci_mem_read,
+    .write = ohci_mem_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+/* USBPortOps */
+static void ohci_attach(USBPort *port1)
+{
+    OHCIState *s = port1->opaque;
+    OHCIPort *port = &s->rhport[port1->index];
+    uint32_t old_state = port->ctrl;
+
+    /* set connect status */
+    port->ctrl |= OHCI_PORT_CCS | OHCI_PORT_CSC;
+
+    /* update speed */
+    if (port->port.dev->speed == USB_SPEED_LOW) {
+        port->ctrl |= OHCI_PORT_LSDA;
+    } else {
+        port->ctrl &= ~OHCI_PORT_LSDA;
+    }
+
+    /* notify of remote-wakeup */
+    if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) {
+        ohci_set_interrupt(s, OHCI_INTR_RD);
+    }
+
+    trace_usb_ohci_port_attach(port1->index);
+
+    if (old_state != port->ctrl) {
+        ohci_set_interrupt(s, OHCI_INTR_RHSC);
+    }
+}
+
 static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev)
 {
     if (ohci->async_td &&
@@ -1799,11 +1735,71 @@ static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev)
     }
 }
 
-static const MemoryRegionOps ohci_mem_ops = {
-    .read = ohci_mem_read,
-    .write = ohci_mem_write,
-    .endianness = DEVICE_LITTLE_ENDIAN,
-};
+static void ohci_child_detach(USBPort *port1, USBDevice *child)
+{
+    OHCIState *s = port1->opaque;
+
+    ohci_async_cancel_device(s, child);
+}
+
+static void ohci_detach(USBPort *port1)
+{
+    OHCIState *s = port1->opaque;
+    OHCIPort *port = &s->rhport[port1->index];
+    uint32_t old_state = port->ctrl;
+
+    ohci_async_cancel_device(s, port1->dev);
+
+    /* set connect status */
+    if (port->ctrl & OHCI_PORT_CCS) {
+        port->ctrl &= ~OHCI_PORT_CCS;
+        port->ctrl |= OHCI_PORT_CSC;
+    }
+    /* disable port */
+    if (port->ctrl & OHCI_PORT_PES) {
+        port->ctrl &= ~OHCI_PORT_PES;
+        port->ctrl |= OHCI_PORT_PESC;
+    }
+    trace_usb_ohci_port_detach(port1->index);
+
+    if (old_state != port->ctrl) {
+        ohci_set_interrupt(s, OHCI_INTR_RHSC);
+    }
+}
+
+static void ohci_wakeup(USBPort *port1)
+{
+    OHCIState *s = port1->opaque;
+    OHCIPort *port = &s->rhport[port1->index];
+    uint32_t intr = 0;
+    if (port->ctrl & OHCI_PORT_PSS) {
+        trace_usb_ohci_port_wakeup(port1->index);
+        port->ctrl |= OHCI_PORT_PSSC;
+        port->ctrl &= ~OHCI_PORT_PSS;
+        intr = OHCI_INTR_RHSC;
+    }
+    /* Note that the controller can be suspended even if this port is not */
+    if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) {
+        trace_usb_ohci_remote_wakeup(s->name);
+        /* This is the one state transition the controller can do by itself */
+        s->ctl &= ~OHCI_CTL_HCFS;
+        s->ctl |= OHCI_USB_RESUME;
+        /* In suspend mode only ResumeDetected is possible, not RHSC:
+         * see the OHCI spec 5.1.2.3.
+         */
+        intr = OHCI_INTR_RD;
+    }
+    ohci_set_interrupt(s, intr);
+}
+
+static void ohci_async_complete_packet(USBPort *port, USBPacket *packet)
+{
+    OHCIState *ohci = container_of(packet, OHCIState, usb_packet);
+
+    trace_usb_ohci_async_complete();
+    ohci->async_complete = true;
+    ohci_process_lists(ohci, 1);
+}
 
 static USBPortOps ohci_port_ops = {
     .attach = ohci_attach,
Signature · 1 line
2.30.2
Reviewed-by Philippe Mathieu-Daudé on v1 3/5
#4 lore raw

Re: [PATCH 3/5] usb/ohci: Move USBPortOps related functions together

Quoted 46 lines · BALATON Zoltan

This also allows removing two forward declarations

---
  hw/usb/hcd-ohci.c | 204 +++++++++++++++++++++++-----------------------
  1 file changed, 100 insertions(+), 104 deletions(-)
hw/usb/hcd-ohci.c +35 -0
+static const MemoryRegionOps ohci_mem_ops = {
+    .read = ohci_mem_read,
+    .write = ohci_mem_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+/* USBPortOps */
+static void ohci_attach(USBPort *port1)
+{
+    OHCIState *s = port1->opaque;
+    OHCIPort *port = &s->rhport[port1->index];
+    uint32_t old_state = port->ctrl;
+
+    /* set connect status */
+    port->ctrl |= OHCI_PORT_CCS | OHCI_PORT_CSC;
+
+    /* update speed */
+    if (port->port.dev->speed == USB_SPEED_LOW) {
+        port->ctrl |= OHCI_PORT_LSDA;
+    } else {
+        port->ctrl &= ~OHCI_PORT_LSDA;
+    }
+
+    /* notify of remote-wakeup */
+    if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) {
+        ohci_set_interrupt(s, OHCI_INTR_RD);
+    }
+
+    trace_usb_ohci_port_attach(port1->index);
+
+    if (old_state != port->ctrl) {
+        ohci_set_interrupt(s, OHCI_INTR_RHSC);
+    }
+}
+
  static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev)
  {
      if (ohci->async_td &&

hw/usb/hcd-ohci.c static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev) · line 1736

Quoted 2 lines
hw/usb/hcd-ohci.c +0 -0
@@ -1799,11 +1735,71 @@ static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev)
      }
  }

We could have ohci_attach() just before ohci*_detach(), anyhow:

Quoted 36 lines
hw/usb/hcd-ohci.c +31 -5
-static const MemoryRegionOps ohci_mem_ops = {
-    .read = ohci_mem_read,
-    .write = ohci_mem_write,
-    .endianness = DEVICE_LITTLE_ENDIAN,
-};
+static void ohci_child_detach(USBPort *port1, USBDevice *child)
+{
+    OHCIState *s = port1->opaque;
+
+    ohci_async_cancel_device(s, child);
+}
+
+static void ohci_detach(USBPort *port1)
+{
+    OHCIState *s = port1->opaque;
+    OHCIPort *port = &s->rhport[port1->index];
+    uint32_t old_state = port->ctrl;
+
+    ohci_async_cancel_device(s, port1->dev);
+
+    /* set connect status */
+    if (port->ctrl & OHCI_PORT_CCS) {
+        port->ctrl &= ~OHCI_PORT_CCS;
+        port->ctrl |= OHCI_PORT_CSC;
+    }
+    /* disable port */
+    if (port->ctrl & OHCI_PORT_PES) {
+        port->ctrl &= ~OHCI_PORT_PES;
+        port->ctrl |= OHCI_PORT_PESC;
+    }
+    trace_usb_ohci_port_detach(port1->index);
+
+    if (old_state != port->ctrl) {
+        ohci_set_interrupt(s, OHCI_INTR_RHSC);
+    }
+}
#5 lore raw

Re: [PATCH 3/5] usb/ohci: Move USBPortOps related functions together

Quoted 44 lines · Philippe Mathieu-Daudé
Quoted 43 lines · BALATON Zoltan

This also allows removing two forward declarations

---
  hw/usb/hcd-ohci.c | 204 +++++++++++++++++++++++-----------------------
  1 file changed, 100 insertions(+), 104 deletions(-)
hw/usb/hcd-ohci.c +35 -0
+static const MemoryRegionOps ohci_mem_ops = {
+    .read = ohci_mem_read,
+    .write = ohci_mem_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+/* USBPortOps */
+static void ohci_attach(USBPort *port1)
+{
+    OHCIState *s = port1->opaque;
+    OHCIPort *port = &s->rhport[port1->index];
+    uint32_t old_state = port->ctrl;
+
+    /* set connect status */
+    port->ctrl |= OHCI_PORT_CCS | OHCI_PORT_CSC;
+
+    /* update speed */
+    if (port->port.dev->speed == USB_SPEED_LOW) {
+        port->ctrl |= OHCI_PORT_LSDA;
+    } else {
+        port->ctrl &= ~OHCI_PORT_LSDA;
+    }
+
+    /* notify of remote-wakeup */
+    if ((s->ctl & OHCI_CTL_HCFS) == OHCI_USB_SUSPEND) {
+        ohci_set_interrupt(s, OHCI_INTR_RD);
+    }
+
+    trace_usb_ohci_port_attach(port1->index);
+
+    if (old_state != port->ctrl) {
+        ohci_set_interrupt(s, OHCI_INTR_RHSC);
+    }
+}
+
  static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev)
Quoted 8 lines

Review static void ohci_async_cancel_device(OHCIState · line 1737

Quoted 6 lines
  {
      if (ohci->async_td &&
(quoted diff) +0 -0
@@ -1799,11 +1735,71 @@ static void ohci_async_cancel_device(OHCIState 
 *ohci, USBDevice *dev)
      }
  }

We could have ohci_attach() just before ohci*_detach(),

The ohci_child_detach() function (which the next patch merges with ohci_async_cancel_device) is used by ohci_detach() but not ohci_attach() that's why I've put it between attach and detach. Attach and detach are less related than ohci_child_detach and ohci_detach in my opinion. Attach and detach are still close enough after the next patch but without moving child_detach and detach apart.

Quoted 3 lines

anyhow:

Thanks for the review.

Regards,
BALATON Zoltan

#6 lore raw

PATCH 4/5 usb/ohci: Merge ohci_async_cancel_device() into ohci_child_detach()

In reply to BALATON Zoltan

These two do the same and only used once so no need to have two functions, simplify by merging them.

---
 hw/usb/hcd-ohci.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)
hw/usb/hcd-ohci.c +4 -9
index d1907afd3f..e87f5bd813 100644
@@ -1725,8 +1725,10 @@ static void ohci_attach(USBPort *port1)
     }
 }
 
-static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev)
+static void ohci_child_detach(USBPort *port1, USBDevice *dev)
 {
+    OHCIState *ohci = port1->opaque;
+
     if (ohci->async_td &&
         usb_packet_is_inflight(&ohci->usb_packet) &&
         ohci->usb_packet.ep->dev == dev) {
@@ -1735,20 +1737,13 @@ static void ohci_async_cancel_device(OHCIState *ohci, USBDevice *dev)
     }
 }
 
-static void ohci_child_detach(USBPort *port1, USBDevice *child)
-{
-    OHCIState *s = port1->opaque;
-
-    ohci_async_cancel_device(s, child);
-}
-
 static void ohci_detach(USBPort *port1)
 {
     OHCIState *s = port1->opaque;
     OHCIPort *port = &s->rhport[port1->index];
     uint32_t old_state = port->ctrl;
 
-    ohci_async_cancel_device(s, port1->dev);
+    ohci_child_detach(port1, port1->dev);
 
     /* set connect status */
     if (port->ctrl & OHCI_PORT_CCS) {
Signature · 1 line
2.30.2
Reviewed-by Philippe Mathieu-Daudé on v1 4/5
#7 lore raw

Re: [PATCH 4/5] usb/ohci: Merge ohci_async_cancel_device() into ohci_child_detach()

Quoted 7 lines · BALATON Zoltan

These two do the same and only used once so no need to have two functions, simplify by merging them.

---
  hw/usb/hcd-ohci.c | 13 ++++---------
  1 file changed, 4 insertions(+), 9 deletions(-)
#8 lore raw

PATCH 5/5 usb/ohci: Don't use packet from OHCIState for isochronous transfers

In reply to BALATON Zoltan

Since isochronous transfers cannot be handled async (the function returns error in that case) we don't need to remember the packet. Avoid using the usb_packet field in OHCIState (as that can be a waiting async packet on another endpoint) and allocate and use a local USBPacket for the iso transfer instead. After this we don't have to care if we're called from a completion callback or not so we can drop that parameter as well.

---
 hw/usb/hcd-ohci.c | 70 +++++++++++++++++++++++++----------------------
 1 file changed, 37 insertions(+), 33 deletions(-)
hw/usb/hcd-ohci.c +37 -33
index e87f5bd813..5e5a93e54f 100644
@@ -548,8 +548,7 @@ static int ohci_copy_iso_td(OHCIState *ohci,
 
 #define USUB(a, b) ((int16_t)((uint16_t)(a) - (uint16_t)(b)))
 
-static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed,
-                               int completion)
+static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed)
 {
     int dir;
     size_t len = 0;
@@ -559,6 +558,9 @@ static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed,
     int i;
     USBDevice *dev;
     USBEndpoint *ep;
+    USBPacket *pkt;
+    uint8_t buf[8192];
+    bool int_req;
     struct ohci_iso_td iso_td;
     uint32_t addr;
     uint16_t starting_frame;
@@ -693,40 +695,42 @@ static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed,
     } else {
         len = end_addr - start_addr + 1;
     }
-    if (len > sizeof(ohci->usb_buf)) {
-        len = sizeof(ohci->usb_buf);
+    if (len > sizeof(buf)) {
+        len = sizeof(buf);
     }
 
     if (len && dir != OHCI_TD_DIR_IN) {
-        if (ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, len,
+        if (ohci_copy_iso_td(ohci, start_addr, end_addr, buf, len,
                              DMA_DIRECTION_TO_DEVICE)) {
             ohci_die(ohci);
             return 1;
         }
     }
 
-    if (!completion) {
-        bool int_req = relative_frame_number == frame_count &&
-                       OHCI_BM(iso_td.flags, TD_DI) == 0;
-        dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA));
-        if (dev == NULL) {
-            trace_usb_ohci_td_dev_error();
-            return 1;
-        }
-        ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN));
-        usb_packet_setup(&ohci->usb_packet, pid, ep, 0, addr, false, int_req);
-        usb_packet_addbuf(&ohci->usb_packet, ohci->usb_buf, len);
-        usb_handle_packet(dev, &ohci->usb_packet);
-        if (ohci->usb_packet.status == USB_RET_ASYNC) {
-            usb_device_flush_ep_queue(dev, ep);
-            return 1;
-        }
+    dev = ohci_find_device(ohci, OHCI_BM(ed->flags, ED_FA));
+    if (dev == NULL) {
+        trace_usb_ohci_td_dev_error();
+        return 1;
     }
-    if (ohci->usb_packet.status == USB_RET_SUCCESS) {
-        ret = ohci->usb_packet.actual_length;
+    ep = usb_ep_get(dev, pid, OHCI_BM(ed->flags, ED_EN));
+    pkt = g_new0(USBPacket, 1);
+    usb_packet_init(pkt);
+    int_req = relative_frame_number == frame_count &&
+              OHCI_BM(iso_td.flags, TD_DI) == 0;
+    usb_packet_setup(pkt, pid, ep, 0, addr, false, int_req);
+    usb_packet_addbuf(pkt, buf, len);
+    usb_handle_packet(dev, pkt);
+    if (pkt->status == USB_RET_ASYNC) {
+        usb_device_flush_ep_queue(dev, ep);
+        g_free(pkt);
+        return 1;
+    }
+    if (pkt->status == USB_RET_SUCCESS) {
+        ret = pkt->actual_length;
     } else {
-        ret = ohci->usb_packet.status;
+        ret = pkt->status;
     }
+    g_free(pkt);
 
     trace_usb_ohci_iso_td_so(start_offset, end_offset, start_addr, end_addr,
                              str, len, ret);
@@ -734,7 +738,7 @@ static int ohci_service_iso_td(OHCIState *ohci, struct ohci_ed *ed,
     /* Writeback */
     if (dir == OHCI_TD_DIR_IN && ret >= 0 && ret <= len) {
         /* IN transfer succeeded */
-        if (ohci_copy_iso_td(ohci, start_addr, end_addr, ohci->usb_buf, ret,
+        if (ohci_copy_iso_td(ohci, start_addr, end_addr, buf, ret,
                              DMA_DIRECTION_FROM_DEVICE)) {
             ohci_die(ohci);
             return 1;
@@ -1057,7 +1061,7 @@ exit_no_retire:
 }
 
 /* Service an endpoint list.  Returns nonzero if active TD were found.  */
-static int ohci_service_ed_list(OHCIState *ohci, uint32_t head, int completion)
+static int ohci_service_ed_list(OHCIState *ohci, uint32_t head)
 {
     struct ohci_ed ed;
     uint32_t next_ed;
@@ -1108,7 +1112,7 @@ static int ohci_service_ed_list(OHCIState *ohci, uint32_t head, int completion)
                     break;
             } else {
                 /* Handle isochronous endpoints */
-                if (ohci_service_iso_td(ohci, &ed, completion))
+                if (ohci_service_iso_td(ohci, &ed))
                     break;
             }
         }
@@ -1136,20 +1140,20 @@ static void ohci_sof(OHCIState *ohci)
 }
 
 /* Process Control and Bulk lists.  */
-static void ohci_process_lists(OHCIState *ohci, int completion)
+static void ohci_process_lists(OHCIState *ohci)
 {
     if ((ohci->ctl & OHCI_CTL_CLE) && (ohci->status & OHCI_STATUS_CLF)) {
         if (ohci->ctrl_cur && ohci->ctrl_cur != ohci->ctrl_head) {
             trace_usb_ohci_process_lists(ohci->ctrl_head, ohci->ctrl_cur);
         }
-        if (!ohci_service_ed_list(ohci, ohci->ctrl_head, completion)) {
+        if (!ohci_service_ed_list(ohci, ohci->ctrl_head)) {
             ohci->ctrl_cur = 0;
             ohci->status &= ~OHCI_STATUS_CLF;
         }
     }
 
     if ((ohci->ctl & OHCI_CTL_BLE) && (ohci->status & OHCI_STATUS_BLF)) {
-        if (!ohci_service_ed_list(ohci, ohci->bulk_head, completion)) {
+        if (!ohci_service_ed_list(ohci, ohci->bulk_head)) {
             ohci->bulk_cur = 0;
             ohci->status &= ~OHCI_STATUS_BLF;
         }
@@ -1173,7 +1177,7 @@ static void ohci_frame_boundary(void *opaque)
         int n;
 
         n = ohci->frame_number & 0x1f;
-        ohci_service_ed_list(ohci, le32_to_cpu(hcca.intr[n]), 0);
+        ohci_service_ed_list(ohci, le32_to_cpu(hcca.intr[n]));
     }
 
     /* Cancel all pending packets if either of the lists has been disabled.  */
@@ -1181,7 +1185,7 @@ static void ohci_frame_boundary(void *opaque)
         ohci_stop_endpoints(ohci);
     }
     ohci->old_ctl = ohci->ctl;
-    ohci_process_lists(ohci, 0);
+    ohci_process_lists(ohci);
 
     /* Stop if UnrecoverableError happened or ohci_sof will crash */
     if (ohci->intr_status & OHCI_INTR_UE) {
@@ -1793,7 +1797,7 @@ static void ohci_async_complete_packet(USBPort *port, USBPacket *packet)
 
     trace_usb_ohci_async_complete();
     ohci->async_complete = true;
-    ohci_process_lists(ohci, 1);
+    ohci_process_lists(ohci);
 }
 
 static USBPortOps ohci_port_ops = {
Signature · 1 line
2.30.2
#9 lore raw
In reply to BALATON Zoltan
Quoted 12 lines · BALATON Zoltan

Hello,

I have these patches from last October when we've looked at what causes problems with mac99 and USB. We've found the main problem is likely not allowing pending packets per endpoint which we did not fix but these patches came out of debugging that and trying to improve the device model so eventually the real problem could be fixed more easily. So these are just clean ups and fixing one potential issue with isochronous transfers breaking pending async packet but it does not solve all problems OHCI currently has. I'm sending it anyway as I don't plan to work further on this so this series could be taken as is for now.

Ping?

Quoted 14 lines

Regards,

BALATON Zoltan (5):
usb/ohci: Move trace point and log ep number to help debugging usb/ohci: Move cancelling async packet to ohci_stop_endpoints() usb/ohci: Move USBPortOps related functions together usb/ohci: Merge ohci_async_cancel_device() into ohci_child_detach() usb/ohci: Don't use packet from OHCIState for isochronous transfers

hw/usb/hcd-ohci.c | 295 +++++++++++++++++++++-----------------------
hw/usb/trace-events | 2 +-

2 files changed, 144 insertions(+), 153 deletions(-)
#10 lore raw
Quoted 14 lines · BALATON Zoltan
Quoted 12 lines · BALATON Zoltan

Hello,

I have these patches from last October when we've looked at what causes problems with mac99 and USB. We've found the main problem is likely not allowing pending packets per endpoint which we did not fix but these patches came out of debugging that and trying to improve the device model so eventually the real problem could be fixed more easily. So these are just clean ups and fixing one potential issue with isochronous transfers breaking pending async packet but it does not solve all problems OHCI currently has. I'm sending it anyway as I don't plan to work further on this so this series could be taken as is for now.

Quoted 1 line

Ping?

Queued now.

thanks,
Gerd

#11 lore raw
Quoted 15 lines · Gerd Hoffmann
Quoted 14 lines · BALATON Zoltan
Quoted 12 lines · BALATON Zoltan

Hello,

I have these patches from last October when we've looked at what causes problems with mac99 and USB. We've found the main problem is likely not allowing pending packets per endpoint which we did not fix but these patches came out of debugging that and trying to improve the device model so eventually the real problem could be fixed more easily. So these are just clean ups and fixing one potential issue with isochronous transfers breaking pending async packet but it does not solve all problems OHCI currently has. I'm sending it anyway as I don't plan to work further on this so this series could be taken as is for now.

Quoted 3 lines
Quoted 1 line

Ping?

Queued now.

Oops, have to take that back, checkpatch throws errors:

HEAD is now at 00abd6f54a24 usb/ohci: Don't use packet from OHCIState for isochronous transfers

error: no note found for object 00abd6f54a246db5877ceb466755374b297d97cf.
ERROR: braces {} are necessary for all arms of this statement #131: FILE: hw/usb/hcd-ohci.c:1115:
+ if (ohci_service_iso_td(ohci, &ed))
[...]

total: 1 errors, 0 warnings, 153 lines checked

Please check all patches & resend.

take care,
Gerd

#12 lore raw
Quoted 30 lines · Gerd Hoffmann
Quoted 15 lines · Gerd Hoffmann
Quoted 14 lines · BALATON Zoltan
Quoted 12 lines · BALATON Zoltan

Hello,

I have these patches from last October when we've looked at what causes problems with mac99 and USB. We've found the main problem is likely not allowing pending packets per endpoint which we did not fix but these patches came out of debugging that and trying to improve the device model so eventually the real problem could be fixed more easily. So these are just clean ups and fixing one potential issue with isochronous transfers breaking pending async packet but it does not solve all problems OHCI currently has. I'm sending it anyway as I don't plan to work further on this so this series could be taken as is for now.

Quoted 3 lines
Quoted 1 line

Ping?

Queued now.

Oops, have to take that back, checkpatch throws errors:

HEAD is now at 00abd6f54a24 usb/ohci: Don't use packet from OHCIState for isochronous transfers

error: no note found for object 00abd6f54a246db5877ceb466755374b297d97cf.
ERROR: braces {} are necessary for all arms of this statement #131: FILE: hw/usb/hcd-ohci.c:1115:
+ if (ohci_service_iso_td(ohci, &ed))
[...]

Quoted 3 lines

total: 1 errors, 0 warnings, 153 lines checked

Please check all patches & resend.

Sorry, I'll resend. I usually run checkpatch before submitting and I think I've checked these when first sent them and haven't got the error but maybe this was a last minute change. Not sure how it was missed.

Regards,
BALATON Zoltan