Revert device tree changes for EUD

Revert the device tree changes for Embedded USB Debugger(EUD) from the usb tree to avoid conflicts as device tree changes for EUD are supposed to go from qcom Tree.

Changes in this patch

*Fixed the issue with revert statement.
*Added the signed-off tag.

Souradeep Chowdhury (2):
Revert "arm64: dts: qcom: sc7280: Set the default dr_mode for usb2" Revert "arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector"

 arch/arm64/boot/dts/qcom/sc7280-idp.dts |  4 ----
 arch/arm64/boot/dts/qcom/sc7280.dtsi    | 36 ---------------------------------
 2 files changed, 40 deletions(-)

--
2.7.4

This reverts commit c18553956f34819e224a79c9890eba2ba0604e15.

Revert the change to set dr_mode for usb2 in case of Embedded USB Debugger(EUD).

---
 arch/arm64/boot/dts/qcom/sc7280-idp.dts | 4 ----
 1 file changed, 4 deletions(-)

index f40eaa5..9b991ba 100644
@@ -61,10 +61,6 @@
 	modem-init;
 };
 
-&usb_2_dwc3 {
-	dr_mode = "otg";
-};
-
 &pmk8350_rtc {
 	status = "okay";
 };

2.7.4

Why are you doing this? Changelog text needs to say why the change is needed, not just what it is doing.

thanks,

greg k-h

This reverts commit a0c68e493007a8c72b6b00f6ac95590a86edc937.

Revert all the changes to add the Embedded USB Debugger(EUD) Node in the device tree, the connector node and also changes to usb2 Node associated with this.

---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 36 ------------------------------------
 1 file changed, 36 deletions(-)

index 96917fe..937c2e0 100644
@@ -2583,12 +2583,6 @@
 				phys = <&usb_2_hsphy>;
 				phy-names = "usb2-phy";
 				maximum-speed = "high-speed";
-				usb-role-switch;
-				port {
-					usb2_role_switch: endpoint {
-						remote-endpoint = <&eud_ep>;
-					};
-				};
 			};
 		};
 

@@ -2630,36 +2624,6 @@
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		eud: eud@88e0000 {
-			compatible = "qcom,sc7280-eud","qcom,eud";
-			reg = <0 0x88e0000 0 0x2000>,
-			      <0 0x88e2000 0 0x1000>;
-			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
-			ports {
-				port@0 {
-					eud_ep: endpoint {
-						remote-endpoint = <&usb2_role_switch>;
-					};
-				};
-				port@1 {
-					eud_con: endpoint {
-						remote-endpoint = <&con_eud>;
-					};
-				};
-			};
-		};
-
-		eud_typec: connector {
-			compatible = "usb-c-connector";
-			ports {
-				port@0 {
-					con_eud: endpoint {
-						remote-endpoint = <&eud_con>;
-					};
-				};
-			};
-		};
-
 		nsp_noc: interconnect@a0c0000 {
 			reg = <0 0x0a0c0000 0 0x10000>;
 			compatible = "qcom,sc7280-nsp-noc";

2.7.4

Again, why?

thanks,

greg k-h