crypto: inside-secure: Add Support for MaxLinear Platform

Hi,

I have been utilizing inside-secure driver on MaxLinear SoC platform (which has eip197 hardware inside).

One issue I found is that I needed to flip the endianness in eip197_write_firmware() function, which for reason I am not aware is using big-endian.
The firmware that I have is clearly using little-endian, and unfortunately I do not have access to Marvell platform to do more investigation or comparison there.
I have also tried to look for clues in Inside-Secure's hardware/firmware documentation, without success.

Thus, assuming each vendor may use different endian format, on these patch set I add support for little-endian firmware (default remains big-endian). MaxLinear platform can then utilize the option, which is implemented as soc data.

An alternative to this would be implementing the option as a new device-tree property, but for now I assume we do not need that since each platform endianness should be fixed, and will not vary per board/hardware.

Please help review.

Thanks!

Peter Harliman Liem (3):
crypto: inside-secure - Expand soc data structure
crypto: inside-secure - Add fw_little_endian option
crypto: inside-secure - Add MaxLinear platform

 drivers/crypto/inside-secure/safexcel.c | 73 ++++++++++++++++++-------
 drivers/crypto/inside-secure/safexcel.h | 10 +++-
 2 files changed, 61 insertions(+), 22 deletions(-)

2.17.1