Revise Richtek RT9467 documentation compatible name
Subsystems (2)
v3 cover Revise Richtek RT9467 documentation compatible name
This patch series revise Richtek RT9467 documentation compatible name from "richtek,rt946-charger" to "richtek,rt9467" and rename the file name of rt9467 documentation yaml.
This issue was reported by Rob in this mail.
(https://lore.kernel.org/all/CAL_JsqJ4gueN3UFfea5JC6xfPjaH6a+7+dioTw=s0W-gBf6Anw@mail.gmail.com/)
Thank you,
ChiaEn Wu
ChiaEn Wu (2):
dt-bindings: power: supply: Revise Richtek RT9467 compatible name
dt-bindings: power: supply: Rename the file name of RT9467 charger
yaml
.../power/supply/richtek,rt9467-charger.yaml | 82 ---------------------- .../bindings/power/supply/richtek,rt9467.yaml | 82 ++++++++++++++++++++++ 2 files changed, 82 insertions(+), 82 deletions(-) delete mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml
Signature · 1 line
2.7.4
PATCH v3 1/2 dt-bindings: power: supply: Revise Richtek RT9467 compatible name
Revise RT9467 compatible name from "richtek,rt9467-charger" to "richtek,rt9467" because it has to match the "compatible name" in the source code.
---
v3:
- Roll back the file name.
v2:
- Add more description about this change in the commit message.
- Rename "richtek,rt9467-charger.yaml" to "richtek,rt9467.yaml".
- Rename "$id" as above.
--- .../devicetree/bindings/power/supply/richtek,rt9467-charger.yaml | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml +3 -3
@@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas/power/supply/richtek,rt9467-charger.yaml# +$id: http://devicetree.org/schemas/power/supply/richtek,rt9467.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Richtek RT9467 Switching Battery Charger with Power Path Management
@@ -25,7 +25,7 @@ description: | properties: compatible: - const: richtek,rt9467-charger + const: richtek,rt9467 reg: maxItems: 1
@@ -65,7 +65,7 @@ examples: #size-cells = <0>; charger@5b { - compatible = "richtek,rt9467-charger"; + compatible = "richtek,rt9467"; reg = <0x5b>; wakeup-source; interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
Signature · 1 line
2.7.4
Re: [PATCH v3 1/2][next] dt-bindings: power: supply: Revise Richtek RT9467 compatible name
Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml
Quoted 23 lines · ChiaEn Wu
Revise RT9467 compatible name from "richtek,rt9467-charger" to "richtek,rt9467" because it has to match the "compatible name" in the source code.
Fixes e1b4620fb503 ("dt-bindings: power: supply: Add Richtek RT9467 battery charger")Reported-by Rob Herring <[email protected]>Signed-off-by ChiaEn Wu <[email protected]>---
v3:
- Roll back the file name.v2:
- Add more description about this change in the commit message.
- Rename "richtek,rt9467-charger.yaml" to "richtek,rt9467.yaml".
- Rename "$id" as above.--- .../devicetree/bindings/power/supply/richtek,rt9467-charger.yaml | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml +0
-0
Missing rename... I don't understand this patchset.
Best regards,
Krzysztof
PATCH v3 2/2 dt-bindings: power: supply: Rename the file name of RT9467 charger yaml
In reply to ChiaEn WuRename the file name from "richtek,rt9467-charger.yaml" to "richtek,rt9467.yaml" to match the "compatible name".
--- .../power/supply/richtek,rt9467-charger.yaml | 82 ---------------------- .../bindings/power/supply/richtek,rt9467.yaml | 82 ++++++++++++++++++++++ 2 files changed, 82 insertions(+), 82 deletions(-) delete mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml
Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml deleted +0 -82
@@ -1,82 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/power/supply/richtek,rt9467.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Richtek RT9467 Switching Battery Charger with Power Path Management - -maintainers: - - ChiYuan Huang <[email protected]> - - ChiaEn Wu <[email protected]> - -description: | - RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for - portable applications. It integrates a synchronous PWM controller, power - MOSFETs, input current sensing and regulation, high-accuracy voltage - regulation, and charge termination. The charge current is regulated through - integrated sensing resistors. - - The RT9467 also features USB On-The-Go (OTG) support. It also integrates - D+/D- pin for USB host/charging port detection. - - Datasheet is available at - https://www.richtek.com/assets/product_file/RT9467/DS9467-01.pdf - -properties: - compatible: - const: richtek,rt9467 - - reg: - maxItems: 1 - - wakeup-source: true - - interrupts: - maxItems: 1 - - charge-enable-gpios: - description: GPIO is used to turn on and off charging. - maxItems: 1 - - usb-otg-vbus-regulator: - type: object - description: OTG boost regulator. - unevaluatedProperties: false - $ref: /schemas/regulator/regulator.yaml# - - properties: - enable-gpios: true - -required: - - compatible - - reg - - wakeup-source - - interrupts - -additionalProperties: false - -examples: - - | - #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/gpio/gpio.h> - i2c { - #address-cells = <1>; - #size-cells = <0>; - - charger@5b { - compatible = "richtek,rt9467"; - reg = <0x5b>; - wakeup-source; - interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>; - charge-enable-gpios = <&gpio26 1 GPIO_ACTIVE_LOW>; - - rt9467_otg_vbus: usb-otg-vbus-regulator { - regulator-name = "rt9467-usb-otg-vbus"; - regulator-min-microvolt = <4425000>; - regulator-max-microvolt = <5825000>; - regulator-min-microamp = <500000>; - regulator-max-microamp = <3000000>; - }; - }; - };
Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml new file +82 -0
82 lines not on this page · raw message
Signature · 1 line
2.7.4
Re: [PATCH v3 2/2][next] dt-bindings: power: supply: Rename the file name of RT9467 charger yaml
Quoted 11 lines · ChiaEn Wu
Rename the file name from "richtek,rt9467-charger.yaml" to "richtek,rt9467.yaml" to match the "compatible name".
Fixes e1b4620fb503 ("dt-bindings: power: supply: Add Richtek RT9467 battery charger")Signed-off-by ChiaEn Wu <[email protected]>--- .../power/supply/richtek,rt9467-charger.yaml | 82 ---------------------- .../bindings/power/supply/richtek,rt9467.yaml | 82 ++++++++++++++++++++++ 2 files changed, 82 insertions(+), 82 deletions(-) delete mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml
No improvements here. Please use standard Git tools or fix your patch-handling-setup.
Best regards,
Krzysztof