Skip to contentSkip to conversation

Revise Richtek RT9467 documentation compatible name

PATCH Superseded ChiaEn Wu 2 participants 5 messages Feb 17, 2023

Subsystems (2)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

ChiaEn Wu

author
#0 lore raw

v3 cover Revise Richtek RT9467 documentation compatible name

This patch series revise Richtek RT9467 documentation compatible name from "richtek,rt946-charger" to "richtek,rt9467" and rename the file name of rt9467 documentation yaml.

This issue was reported by Rob in this mail.
(https://lore.kernel.org/all/CAL_JsqJ4gueN3UFfea5JC6xfPjaH6a+7+dioTw=s0W-gBf6Anw@mail.gmail.com/)

Thank you,
ChiaEn Wu

ChiaEn Wu (2):
dt-bindings: power: supply: Revise Richtek RT9467 compatible name
dt-bindings: power: supply: Rename the file name of RT9467 charger
yaml

 .../power/supply/richtek,rt9467-charger.yaml       | 82 ----------------------
 .../bindings/power/supply/richtek,rt9467.yaml      | 82 ++++++++++++++++++++++
 2 files changed, 82 insertions(+), 82 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml
 create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH v3 1/2 dt-bindings: power: supply: Revise Richtek RT9467 compatible name

Revise RT9467 compatible name from "richtek,rt9467-charger" to "richtek,rt9467" because it has to match the "compatible name" in the source code.

Fixes e1b4620fb503 ("dt-bindings: power: supply: Add Richtek RT9467 battery charger")

---
v3:
- Roll back the file name.

v2:
- Add more description about this change in the commit message.
- Rename "richtek,rt9467-charger.yaml" to "richtek,rt9467.yaml".
- Rename "$id" as above.

---
 .../devicetree/bindings/power/supply/richtek,rt9467-charger.yaml    | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml +3 -3
index 92c5706..3723717 100644
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/power/supply/richtek,rt9467-charger.yaml#
+$id: http://devicetree.org/schemas/power/supply/richtek,rt9467.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Richtek RT9467 Switching Battery Charger with Power Path Management
@@ -25,7 +25,7 @@ description: |
 
 properties:
   compatible:
-    const: richtek,rt9467-charger
+    const: richtek,rt9467
 
   reg:
     maxItems: 1
@@ -65,7 +65,7 @@ examples:
       #size-cells = <0>;
 
       charger@5b {
-        compatible = "richtek,rt9467-charger";
+        compatible = "richtek,rt9467";
         reg = <0x5b>;
         wakeup-source;
         interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
Signature · 1 line
2.7.4
author
#3 lore raw

PATCH v3 2/2 dt-bindings: power: supply: Rename the file name of RT9467 charger yaml

In reply to ChiaEn Wu

Rename the file name from "richtek,rt9467-charger.yaml" to "richtek,rt9467.yaml" to match the "compatible name".

Fixes e1b4620fb503 ("dt-bindings: power: supply: Add Richtek RT9467 battery charger")
---
 .../power/supply/richtek,rt9467-charger.yaml       | 82 ----------------------
 .../bindings/power/supply/richtek,rt9467.yaml      | 82 ++++++++++++++++++++++
 2 files changed, 82 insertions(+), 82 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml
 create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml
Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml deleted +0 -82
deleted file mode 100644
index 3723717..00000000
@@ -1,82 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/power/supply/richtek,rt9467.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Richtek RT9467 Switching Battery Charger with Power Path Management
-
-maintainers:
-  - ChiYuan Huang <[email protected]>
-  - ChiaEn Wu <[email protected]>
-
-description: |
-  RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger for
-  portable applications. It integrates a synchronous PWM controller, power
-  MOSFETs, input current sensing and regulation, high-accuracy voltage
-  regulation, and charge termination. The charge current is regulated through
-  integrated sensing resistors.
-
-  The RT9467 also features USB On-The-Go (OTG) support. It also integrates
-  D+/D- pin for USB host/charging port detection.
-
-  Datasheet is available at
-  https://www.richtek.com/assets/product_file/RT9467/DS9467-01.pdf
-
-properties:
-  compatible:
-    const: richtek,rt9467
-
-  reg:
-    maxItems: 1
-
-  wakeup-source: true
-
-  interrupts:
-    maxItems: 1
-
-  charge-enable-gpios:
-    description: GPIO is used to turn on and off charging.
-    maxItems: 1
-
-  usb-otg-vbus-regulator:
-    type: object
-    description: OTG boost regulator.
-    unevaluatedProperties: false
-    $ref: /schemas/regulator/regulator.yaml#
-
-    properties:
-      enable-gpios: true
-
-required:
-  - compatible
-  - reg
-  - wakeup-source
-  - interrupts
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/interrupt-controller/irq.h>
-    #include <dt-bindings/gpio/gpio.h>
-    i2c {
-      #address-cells = <1>;
-      #size-cells = <0>;
-
-      charger@5b {
-        compatible = "richtek,rt9467";
-        reg = <0x5b>;
-        wakeup-source;
-        interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>;
-        charge-enable-gpios = <&gpio26 1 GPIO_ACTIVE_LOW>;
-
-        rt9467_otg_vbus: usb-otg-vbus-regulator {
-          regulator-name = "rt9467-usb-otg-vbus";
-          regulator-min-microvolt = <4425000>;
-          regulator-max-microvolt = <5825000>;
-          regulator-min-microamp = <500000>;
-          regulator-max-microamp = <3000000>;
-        };
-      };
-    };
Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml new file +82 -0

82 lines not on this page · raw message

Signature · 1 line
2.7.4
#2 lore raw

Re: [PATCH v3 1/2][next] dt-bindings: power: supply: Revise Richtek RT9467 compatible name

In reply to ChiaEn Wu

Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml

Quoted 23 lines · ChiaEn Wu

Revise RT9467 compatible name from "richtek,rt9467-charger" to "richtek,rt9467" because it has to match the "compatible name" in the source code.

Fixes e1b4620fb503 ("dt-bindings: power: supply: Add Richtek RT9467 battery charger")

---
v3:
- Roll back the file name.

v2:
- Add more description about this change in the commit message.
- Rename "richtek,rt9467-charger.yaml" to "richtek,rt9467.yaml".
- Rename "$id" as above.

---
 .../devicetree/bindings/power/supply/richtek,rt9467-charger.yaml    | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml +0 -0
index 92c5706..3723717 100644

Missing rename... I don't understand this patchset.

Best regards,
Krzysztof

#4 lore raw

Re: [PATCH v3 2/2][next] dt-bindings: power: supply: Rename the file name of RT9467 charger yaml

In reply to ChiaEn Wu
Quoted 11 lines · ChiaEn Wu

Rename the file name from "richtek,rt9467-charger.yaml" to "richtek,rt9467.yaml" to match the "compatible name".

Fixes e1b4620fb503 ("dt-bindings: power: supply: Add Richtek RT9467 battery charger")
---
 .../power/supply/richtek,rt9467-charger.yaml       | 82 ----------------------
 .../bindings/power/supply/richtek,rt9467.yaml      | 82 ++++++++++++++++++++++
 2 files changed, 82 insertions(+), 82 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml
 create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9467.yaml

No improvements here. Please use standard Git tools or fix your patch-handling-setup.

Best regards,
Krzysztof