Q35 Support
cover Q35 Support
Q35 support using Qemu's device emulation. I based the patches from 2017 found on the mailing list here:
https://lists.xenproject.org/archives/html/xen-devel/2018-03/msg01176.html
I have been using a version of these patches on Xen 4.16 with Qemu version 4.1 for over 6 months. The guest VMs are very stable, and PCIe PT is working as was designed (all of the PCIe devices are on the root PCIe device). I have successfully passed through GPUs, NICs, etc. I was asked by those in the community to attempt to once again upstream the patches. I have them working with Seabios and OVMF (patches are needed to OVMF which I will be sending to the mailing list). I will be sending my Qemu patches to their mailing list in hopes of getting everything upstreamed. The Qemu patches allow for the xenvbd to properly unplug the AHCI SATA device, and all xen pv windows drivers work as intended.
I used the original author of the patches to get a majority of this to work:
Alexey Gerasimenko. I fixed the patches to be in line with the upstream Qemu and Xen versions. Any original issues may still exist; however, I am sure in time they can be improved. If the code doesn't exist then they can't be actively looked at by the community.
I am not an expert on the Q35 chipset or PCIe technology. This is my first patch to this mailing list.
Recap of changes to Qemu, only here for reference:
pc/xen: Xen Q35 support: provide IRQ handling for PCI devices pc/q35: Apply PCI bus BSEL property for Xen PCI device hotplug acpi/ich9: Multiple fixes for S3 support
acpi/pcihp: Allow for machines to hotplug when using Xen isa/lpc_ich9: Write lpc configuration for xen IRQs q35/acpi/xen: Provide ACPI PCI hotplug interface for Xen on Q35 q35/xen: Add Xen platform device support for Q35
q35: Fix incorrect values for PCIEXBAR masks
xen/pt: XenHostPCIDevice: provide functions for PCI Capabilities and
PCIe Extended Capabilities enumeration
xen/pt: avoid reading PCIe device type and cap version multiple times xen/pt: determine the legacy/PCIe mode for a passed through device xen/pt: Xen PCIe passthrough support for Q35: bypass PCIe topology
check
xen/pt: add support for PCIe Extended Capabilities and larger config
space
xen/pt: handle PCIe Extended Capabilities Next register xen/pt: allow to hide PCIe Extended Capabilities
xen/pt: add Vendor-specific PCIe Extended Capability descriptor and
sizing
xen/pt: add fixed-size PCIe Extended Capabilities descriptors xen/pt: add AER PCIe Extended Capability descriptor and sizing xen/pt: add descriptors and size calculation for
RCLD/ACS/PMUX/DPA/MCAST/TPH/DPC PCIe Extended Capabilities
xen/pt: add Resizable BAR PCIe Extended Capability descriptor and
sizing
xen/pt: add VC/VC9/MFVC PCIe Extended Capabilities descriptors and
sizing
Changes that would be going to upstream Qemu:
hw/acpi/ich9.c | 22 +- hw/acpi/pcihp.c | 6 +- hw/core/machine.c | 19 + hw/i386/pc_piix.c | 3 +- hw/i386/pc_q35.c | 39 +- hw/i386/xen/xen-hvm.c | 7 +- hw/i386/xen/xen_platform.c | 19 +- hw/ide/ahci.c | 2 +- hw/isa/lpc_ich9.c | 53 +- hw/isa/piix3.c | 2 +- hw/pci-host/q35.c | 28 +- hw/pci/pci.c | 17 + hw/xen/xen-host-pci-device.c | 106 +++- hw/xen/xen-host-pci-device.h | 6 +- hw/xen/xen_pt.c | 49 +- hw/xen/xen_pt.h | 19 +- hw/xen/xen_pt_config_init.c | 1103 ++++++++++++++++++++++++++++++--- include/hw/acpi/ich9.h | 1 + include/hw/acpi/pcihp.h | 2 + include/hw/boards.h | 1 + include/hw/i386/pc.h | 3 + include/hw/pci-host/q35.h | 4 +- include/hw/pci/pci.h | 3 + include/hw/southbridge/ich9.h | 1 + include/hw/xen/xen.h | 4 +- qemu-options.hx | 1 + softmmu/datadir.c | 1 - softmmu/qdev-monitor.c | 3 +- stubs/xen-hw-stub.c | 4 +- 29 files changed, 1396 insertions(+), 132 deletions(-)
*** These patches are not found in this series, if they are supposed to be I will send them here as well. ***
Recap of changes to Xen:
libacpi: new DSDT ACPI table for Q35
Makefile: build and use new DSDT table for Q35
hvmloader: add function to query an emulated machine type (i440/Q35)
hvmloader: add ACPI enabling for Q35
hvmloader: add Q35 DSDT table loading
hvmloader: add basic Q35 support
hvmloader: allocate MMCONFIG area in the MMIO hole + minor code
refactoring
hvmloader: seabios dsdt set to load correct config
hvmloader: ovmf dsdt set to load correct config
libxl: Q35 support (new option device_model_machine)
libxl: Xen Platform device support for Q35
libacpi: build ACPI MCFG table if requested
hvmloader: use libacpi to build MCFG table
docs: provide description for device_model_machine option
Joel Upham (1):
Q35 support
docs/man/xl.cfg.5.pod.in | 27 ++ tools/firmware/hvmloader/Makefile | 2 +- tools/firmware/hvmloader/config.h | 6 + tools/firmware/hvmloader/hvmloader.c | 13 +- tools/firmware/hvmloader/ovmf.c | 7 +- tools/firmware/hvmloader/pci.c | 285 +++++++++---- tools/firmware/hvmloader/pci_regs.h | 6 + tools/firmware/hvmloader/seabios.c | 5 + tools/firmware/hvmloader/util.c | 130 +++++- tools/firmware/hvmloader/util.h | 10 + tools/libacpi/Makefile | 10 +- tools/libacpi/acpi2_0.h | 21 + tools/libacpi/build.c | 43 ++ tools/libacpi/dsdt_q35.asl | 578 +++++++++++++++++++++++++++ tools/libacpi/libacpi.h | 4 + tools/libs/light/libxl_dm.c | 60 ++- tools/libs/light/libxl_types.idl | 8 + tools/xl/xl_parse.c | 14 + 18 files changed, 1120 insertions(+), 109 deletions(-) create mode 100644 tools/libacpi/dsdt_q35.asl
Signature · 1 line
2.34.1
PATCH 1/1 Q35 support
--- docs/man/xl.cfg.5.pod.in | 27 ++ tools/firmware/hvmloader/Makefile | 2 +- tools/firmware/hvmloader/config.h | 6 + tools/firmware/hvmloader/hvmloader.c | 13 +- tools/firmware/hvmloader/ovmf.c | 7 +- tools/firmware/hvmloader/pci.c | 285 +++++++++---- tools/firmware/hvmloader/pci_regs.h | 6 + tools/firmware/hvmloader/seabios.c | 5 + tools/firmware/hvmloader/util.c | 130 +++++- tools/firmware/hvmloader/util.h | 10 + tools/libacpi/Makefile | 10 +- tools/libacpi/acpi2_0.h | 21 + tools/libacpi/build.c | 43 ++ tools/libacpi/dsdt_q35.asl | 578 +++++++++++++++++++++++++++ tools/libacpi/libacpi.h | 4 + tools/libs/light/libxl_dm.c | 60 ++- tools/libs/light/libxl_types.idl | 8 + tools/xl/xl_parse.c | 14 + 18 files changed, 1120 insertions(+), 109 deletions(-) create mode 100644 tools/libacpi/dsdt_q35.asl
docs/man/xl.cfg.5.pod.in +27 -0
@@ -2838,6 +2838,33 @@ you have existing guests then, depending on the nature of the guest Operating System, you may wish to force them to use the device model which they were installed with. +=item B<device_model_machine="STRING"> + +Selects which chipset the device model should emulate for this +guest. + +Valid options are: + +=over 4 + +=item B<"i440"> + +Use i440 emulation (a default setting) + +=item B<"q35"> + +Use Q35/ICH9 emulation. This enables additional features for +PCIe device passthrough + +=back + +Note that omitting device_model_machine parameter means i440 system +by default, so the default behavior doesn't change for old domain +config files. + +It is recommended to install the guest OS from scratch to avoid issues +due to the emulated platform change. + =item B<device_model_override="PATH"> Override the path to the binary to be used as the device-model running in
tools/firmware/hvmloader/Makefile +1 -1
@@ -70,7 +70,7 @@ rombios.o: roms.inc smbios.o: CFLAGS += -D__SMBIOS_DATE__="\"$(SMBIOS_REL_DATE)\"" ACPI_PATH = ../../libacpi -DSDT_FILES = dsdt_anycpu.c dsdt_15cpu.c dsdt_anycpu_qemu_xen.c +DSDT_FILES = dsdt_anycpu.c dsdt_15cpu.c dsdt_anycpu_qemu_xen.c dsdt_q35_anycpu_qemu_xen.c ACPI_OBJS = $(patsubst %.c,%.o,$(DSDT_FILES)) build.o static_tables.o $(ACPI_OBJS): CFLAGS += -iquote . -DLIBACPI_STDUTILS=\"$(CURDIR)/util.h\" CFLAGS += -I$(ACPI_PATH)
tools/firmware/hvmloader/config.h +6 -0
@@ -54,6 +54,12 @@ extern uint8_t ioapic_version;#define PCI_ISA_DEVFN 0x08/* dev 1, fn 0 */ #define PCI_ISA_IRQ_MASK 0x0c20U/* ISA IRQs 5,10,11 are PCI connected */ +#define PCI_ICH9_LPC_DEVFN 0xf8/* dev 31, fn 0 */ +#define PCI_MCH_DEVFN 0/* bus 0, dev 0, func 0 */ + +/* possible values are: 64, 128, 256 */ +#define PCI_MAX_MCFG_BUSES 64 +#define ACPI_TIS_HDR_ADDRESS 0xFED40F00UL
tools/firmware/hvmloader/hvmloader.c +11 -2
@@ -259,8 +259,17 @@ static const struct bios_config *detect_bios(void)static void acpi_enable_sci (void ) {uint8_t pm1a_cnt_val; +uint8_t acpi_enable_val; + +#define SMI_CMD_IOPORT 0xb2 +#define PIIX4_ACPI_ENABLE 0xf1 +#define ICH9_ACPI_ENABLE 0x02 + +if (get_pc_machine_type () ==MACHINE_TYPE_Q35 ) + acpi_enable_val =ICH9_ACPI_ENABLE ; +else + acpi_enable_val =PIIX4_ACPI_ENABLE ; -#define PIIX4_SMI_CMD_IOPORT 0xb2#define PIIX4_ACPI_ENABLE 0xf1/*
@@ -269,7 +278,7 @@ static void acpi_enable_sci(void)*/ pm1a_cnt_val =inb (ACPI_PM1A_CNT_BLK_ADDRESS_V1 );if ( !(pm1a_cnt_val &ACPI_PM1C_SCI_EN ) ) -outb (PIIX4_SMI_CMD_IOPORT ,PIIX4_ACPI_ENABLE ); +outb (SMI_CMD_IOPORT , acpi_enable_val); pm1a_cnt_val =inb (ACPI_PM1A_CNT_BLK_ADDRESS_V1 );BUG_ON (!(pm1a_cnt_val &ACPI_PM1C_SCI_EN ));
tools/firmware/hvmloader/ovmf.c +6 -1
@@ -121,10 +121,15 @@ static void ovmf_acpi_build_tables(void)struct acpi_config config = { .dsdt_anycpu = dsdt_anycpu_qemu_xen, .dsdt_anycpu_len = dsdt_anycpu_qemu_xen_len, - .dsdt_15cpu =NULL , + .dsdt_15cpu =NULL , .dsdt_15cpu_len =0 }; +if (get_pc_machine_type () ==MACHINE_TYPE_Q35 ) { + config.dsdt_anycpu = dsdt_q35_anycpu_qemu_xen; + config.dsdt_anycpu_len = dsdt_q35_anycpu_qemu_xen_len; + } +hvmloader_acpi_build_tables (&config,ACPI_PHYSICAL_ADDRESS ); }
tools/firmware/hvmloader/pci.c +198 -87
413 lines not on this page · raw message
tools/firmware/hvmloader/pci_regs.h +6 -0
@@ -107,6 +107,12 @@#define PCI_INTEL_OPREGION 0xfc/* 4 bits */ +#define PCI_VENDOR_ID_INTEL 0x8086 +#define PCI_DEVICE_ID_INTEL_82441 0x1237 +#define PCI_DEVICE_ID_INTEL_Q35_MCH 0x29c0 + +#define PCI_MCH_PCIEXBAR 0x60 +#endif /* __HVMLOADER_PCI_REGS_H__ */ /*
tools/firmware/hvmloader/seabios.c +5 -0
@@ -96,6 +96,11 @@ static void seabios_acpi_build_tables(void) .dsdt_15cpu_len = 0, }; +if (get_pc_machine_type () ==MACHINE_TYPE_Q35 ) { + config.dsdt_anycpu = dsdt_q35_anycpu_qemu_xen; + config.dsdt_anycpu_len = dsdt_q35_anycpu_qemu_xen_len; + } +hvmloader_acpi_build_tables (&config, rsdp);add_table (rsdp); }
tools/firmware/hvmloader/util.c +128 -2
154 lines not on this page · raw message
tools/firmware/hvmloader/util.h +10 -0
@@ -90,6 +90,14 @@ void pci_write(uint32_t devfn, uint32_t reg, uint32_t len, uint32_t val);#define pci_writew (devfn, reg, val) pci_write(devfn, reg, 2, (uint16_t)(val))#define pci_writel (devfn, reg, val) pci_write(devfn, reg, 4, (uint32_t)(val)) +/* Emulated machine types */ +#define MACHINE_TYPE_UNDEFINED 0 +#define MACHINE_TYPE_I440 1 +#define MACHINE_TYPE_Q35 2 +#define MACHINE_TYPE_UNKNOWN (-1) + +int get_pc_machine_type (void ); +/* Get a pointer to the shared-info page */ struct shared_info *get_shared_info (void ) __attribute__ ((const));
@@ -270,7 +278,9 @@ bool check_overlap(uint64_t start, uint64_t size, uint64_t reserved_start, uint64_t reserved_size);extern const unsigned char dsdt_anycpu_qemu_xen[], dsdt_anycpu[], dsdt_15cpu[]; +extern const unsigned char dsdt_q35_anycpu_qemu_xen[];extern const int dsdt_anycpu_qemu_xen_len, dsdt_anycpu_len, dsdt_15cpu_len; +extern const int dsdt_q35_anycpu_qemu_xen_len;unsigned long acpi_pages_allocated (void );
tools/libacpi/Makefile +9 -1
@@ -11,7 +11,7 @@ endif MK_DSDT = $(ACPI_BUILD_DIR)/mk_dsdt -C_SRC-$(CONFIG_X86) = dsdt_anycpu.c dsdt_15cpu.c dsdt_anycpu_qemu_xen.c dsdt_pvh.c +C_SRC-$(CONFIG_X86) = dsdt_anycpu.c dsdt_15cpu.c dsdt_anycpu_qemu_xen.c dsdt_q35_anycpu_qemu_xen.c dsdt_pvh.c C_SRC-$(CONFIG_ARM_64) = dsdt_anycpu_arm.c DSDT_FILES ?= $(C_SRC-y) C_SRC = $(addprefix $(ACPI_BUILD_DIR)/, $(DSDT_FILES))
@@ -54,6 +54,14 @@ $(ACPI_BUILD_DIR)/dsdt_%cpu.asl: dsdt.asl dsdt_acpi_info.asl $(MK_DSDT) $(MK_DSDT) --debug=$(debug) --maxcpu $* >> $@.$(TMP_SUFFIX) mv -f $@.$(TMP_SUFFIX) $@ +$(ACPI_BUILD_DIR)/dsdt_q35_anycpu_qemu_xen.asl: dsdt_q35.asl dsdt_acpi_info.asl $(MK_DSDT) + # Remove last bracket + awk 'NR > 1 {print s} {s=$$0}' $< > $@.$(TMP_SUFFIX) + cat dsdt_acpi_info.asl >> $@.$(TMP_SUFFIX) + $(MK_DSDT) --debug=$(debug) --dm-version qemu-xen >> $@.$(TMP_SUFFIX) + mv -f $@.$(TMP_SUFFIX) $@ + + $(ACPI_BUILD_DIR)/dsdt_pvh.asl: dsdt_acpi_info.asl $(MK_DSDT) printf "DefinitionBlock (\"DSDT.aml\", \"DSDT\", 5, \"Xen\", \"HVM\", 0)\n{" > $@ cat dsdt_acpi_info.asl >> $@
tools/libacpi/acpi2_0.h +21 -0
@@ -442,6 +442,24 @@ struct acpi_20_slit {uint64_t localities;uint8_t entry[0 ]; }; +/* +* PCI Express Memory Mapped Configuration Description Table +*/ +struct mcfg_range_entry { +uint64_t base_address; +uint16_t pci_segment; +uint8_t start_pci_bus_num; +uint8_t end_pci_bus_num; +uint32_t reserved; +}; + +struct acpi_mcfg { +struct acpi_header header; +uint8_t reserved[8 ]; +struct mcfg_range_entry entries[1 ]; +}; + +#define MCFG_SIZE_TO_NUM_BUSES (size) ((size) >> 20)/* * Table Signatures.
@@ -458,6 +476,8 @@ struct acpi_20_slit {#define ACPI_2_0_WAET_SIGNATURE ASCII32('W','A','E','T')#define ACPI_2_0_SRAT_SIGNATURE ASCII32('S','R','A','T')#define ACPI_2_0_SLIT_SIGNATURE ASCII32('S','L','I','T') +#define ACPI_MCFG_SIGNATURE ASCII32('M','C','F','G') +/* * Table revision numbers.
@@ -473,6 +493,7 @@ struct acpi_20_slit {#define ACPI_1_0_FADT_REVISION 0x01#define ACPI_2_0_SRAT_REVISION 0x01#define ACPI_2_0_SLIT_REVISION 0x01 +#define ACPI_1_0_MCFG_REVISION 0x01#pragma pack ()
tools/libacpi/build.c +43 -0
61 lines not on this page · raw message
tools/libacpi/dsdt_q35.asl new file +578 -0
578 lines not on this page · raw message
tools/libacpi/libacpi.h +4 -0
@@ -27,6 +27,7 @@#define ACPI_HAS_8042 (1<<13)#define ACPI_HAS_CMOS_RTC (1<<14)#define ACPI_HAS_SSDT_LAPTOP_SLATE (1<<15) +#define ACPI_HAS_MCFG (1<<16)struct xen_vmemrange ;struct acpi_numa {
@@ -89,6 +90,9 @@ struct acpi_config {uint32_t ioapic_base_address;uint16_t pci_isa_irq_mask;uint8_t ioapic_id; + +uint64_t mmconfig_addr; +uint32_t mmconfig_len; };int acpi_build_tables (struct acpi_ctxt *ctxt,struct acpi_config *config);
tools/libs/light/libxl_dm.c +45 -15
87 lines not on this page · raw message
tools/libs/light/libxl_types.idl +8 -0
@@ -108,6 +108,13 @@ libxl_device_model_version = Enumeration("device_model_version", [ (2, "QEMU_XEN"), # Upstream based qemu-xen device model ]) +libxl_device_model_machine = Enumeration("device_model_machine", [ + (0, "UNKNOWN"), + (1, "I440"), + (2, "Q35"), + ]) + + libxl_console_type = Enumeration("console_type", [ (0, "UNKNOWN"), (1, "SERIAL"),
@@ -575,6 +582,7 @@ libxl_domain_build_info = Struct("domain_build_info",[ ("device_model_ssidref", uint32), ("device_model_ssid_label", string), ("device_model_user", string), + ("device_model_machine", libxl_device_model_machine), # extra parameters pass directly to qemu, NULL terminated ("extra", libxl_string_list),
tools/xl/xl_parse.c +14 -0
@@ -2689,6 +2689,20 @@ skip_usbdev:if (!xlu_cfg_get_long (config,"stubdomain_memory" , &l,0 )) b_info->stubdomain_memkb = l *1024 ; +if (!xlu_cfg_get_string (config,"device_model_machine" , &buf,0 )) { +if (!strcmp (buf,"i440" )) { + b_info->device_model_machine =LIBXL_DEVICE_MODEL_MACHINE_I440 ; + }else if (!strcmp (buf,"q35" )) { + b_info->device_model_machine =LIBXL_DEVICE_MODEL_MACHINE_Q35 ; + }else { +fprintf (stderr, +"Unknown device_model_machine \"%s\" specified\n" , buf); +exit (1 ); + } + }else { + b_info->device_model_machine =LIBXL_DEVICE_MODEL_MACHINE_UNKNOWN ; + } +#define parse_extra_args (type) \ e = xlu_cfg_get_list_as_string_list(config, "device_model_args"#type, \ &b_info->extra##type, 0); \
Signature · 1 line
2.34.1
Quoted 85 lines · Joel Upham
Q35 support using Qemu's device emulation. I based the patches from 2017 found on the mailing list here:
https://lists.xenproject.org/archives/html/xen-devel/2018-03/msg01176.htmlI have been using a version of these patches on Xen 4.16 with Qemu version 4.1 for over 6 months. The guest VMs are very stable, and PCIe PT is working as was designed (all of the PCIe devices are on the root PCIe device). I have successfully passed through GPUs, NICs, etc. I was asked by those in the community to attempt to once again upstream the patches. I have them working with Seabios and OVMF (patches are needed to OVMF which I will be sending to the mailing list). I will be sending my Qemu patches to their mailing list in hopes of getting everything upstreamed. The Qemu patches allow for the xenvbd to properly unplug the AHCI SATA device, and all xen pv windows drivers work as intended.
I used the original author of the patches to get a majority of this to work:
Alexey Gerasimenko. I fixed the patches to be in line with the upstream Qemu and Xen versions. Any original issues may still exist; however, I am sure in time they can be improved. If the code doesn't exist then they can't be actively looked at by the community.I am not an expert on the Q35 chipset or PCIe technology. This is my first patch to this mailing list.
Recap of changes to Qemu, only here for reference:
pc/xen: Xen Q35 support: provide IRQ handling for PCI devices pc/q35: Apply PCI bus BSEL property for Xen PCI device hotplug acpi/ich9: Multiple fixes for S3 support
acpi/pcihp: Allow for machines to hotplug when using Xen isa/lpc_ich9: Write lpc configuration for xen IRQs q35/acpi/xen: Provide ACPI PCI hotplug interface for Xen on Q35 q35/xen: Add Xen platform device support for Q35
q35: Fix incorrect values for PCIEXBAR masks
xen/pt: XenHostPCIDevice: provide functions for PCI Capabilities and
PCIe Extended Capabilities enumeration
xen/pt: avoid reading PCIe device type and cap version multiple times xen/pt: determine the legacy/PCIe mode for a passed through device xen/pt: Xen PCIe passthrough support for Q35: bypass PCIe topology
check
xen/pt: add support for PCIe Extended Capabilities and larger config
space
xen/pt: handle PCIe Extended Capabilities Next register xen/pt: allow to hide PCIe Extended Capabilities
xen/pt: add Vendor-specific PCIe Extended Capability descriptor and
sizing
xen/pt: add fixed-size PCIe Extended Capabilities descriptors xen/pt: add AER PCIe Extended Capability descriptor and sizing xen/pt: add descriptors and size calculation for
RCLD/ACS/PMUX/DPA/MCAST/TPH/DPC PCIe Extended Capabilities
xen/pt: add Resizable BAR PCIe Extended Capability descriptor and
sizing
xen/pt: add VC/VC9/MFVC PCIe Extended Capabilities descriptors and
sizingChanges that would be going to upstream Qemu:
hw/acpi/ich9.c | 22 +- hw/acpi/pcihp.c | 6 +- hw/core/machine.c | 19 + hw/i386/pc_piix.c | 3 +- hw/i386/pc_q35.c | 39 +- hw/i386/xen/xen-hvm.c | 7 +- hw/i386/xen/xen_platform.c | 19 +- hw/ide/ahci.c | 2 +- hw/isa/lpc_ich9.c | 53 +- hw/isa/piix3.c | 2 +- hw/pci-host/q35.c | 28 +- hw/pci/pci.c | 17 + hw/xen/xen-host-pci-device.c | 106 +++- hw/xen/xen-host-pci-device.h | 6 +- hw/xen/xen_pt.c | 49 +- hw/xen/xen_pt.h | 19 +- hw/xen/xen_pt_config_init.c | 1103 ++++++++++++++++++++++++++++++--- include/hw/acpi/ich9.h | 1 + include/hw/acpi/pcihp.h | 2 + include/hw/boards.h | 1 + include/hw/i386/pc.h | 3 + include/hw/pci-host/q35.h | 4 +- include/hw/pci/pci.h | 3 + include/hw/southbridge/ich9.h | 1 + include/hw/xen/xen.h | 4 +- qemu-options.hx | 1 + softmmu/datadir.c | 1 - softmmu/qdev-monitor.c | 3 +- stubs/xen-hw-stub.c | 4 +- 29 files changed, 1396 insertions(+), 132 deletions(-)
Quoted 2 lines
*** These patches are not found in this series, if they are supposed to be I will send them here as well. ***
It's unclear, do the QEMU patches depend on the Xen side? I have a suspicion you likely want to post them mostly at the same time, but using two different patch series (one for Xen and one for QEMU).
Quoted 17 lines
Recap of changes to Xen:
libacpi: new DSDT ACPI table for Q35
Makefile: build and use new DSDT table for Q35
hvmloader: add function to query an emulated machine type (i440/Q35)
hvmloader: add ACPI enabling for Q35
hvmloader: add Q35 DSDT table loading
hvmloader: add basic Q35 support
hvmloader: allocate MMCONFIG area in the MMIO hole + minor code
refactoring
hvmloader: seabios dsdt set to load correct config
hvmloader: ovmf dsdt set to load correct config
libxl: Q35 support (new optiondevice_model_machine)
libxl: Xen Platform device support for Q35
libacpi: build ACPI MCFG table if requested
hvmloader: use libacpi to build MCFG table
docs: provide description fordevice_model_machineoption
Quoted 2 lines
Joel Upham (1):
Q35 support
I'm afraid this needs to be split into a patch series, with proper commit messages in order to be considered for review. The current huge patch is impossible to review at all.
Also you need to keep the Signed-off-by of the original author in the patches.
Thanks, Roger.
I actually realized that after submitting yesterday and have been splitting them like the original had done for both Qemu and Xen. Thanks again for getting back to me.
-Joel
Quoted 125 lines · Roger Pau Monné
Quoted 3 lines · Joel Upham
Q35 support using Qemu's device emulation. I based the patches from 2017 found on the mailing list here:
https://lists.xenproject.org/archives/html/xen-devel/2018-03/msg01176.html
Quoted 12 lines
I have been using a version of these patches on Xen 4.16 with Qemu version 4.1 for over 6 months. The guest VMs are very stable, and PCIe PT is working as was designed (all of the PCIe devices are on the root PCIe device). I have successfully passed through GPUs, NICs, etc. I was asked by those in the community to attempt to once again upstream the patches. I have them working with Seabios and OVMF (patches are needed to OVMF which I will be sending to the mailing list). I will be sending my Qemu patches to their mailing list in hopes of getting everything upstreamed. The Qemu patches allow for the xenvbd to properly unplug the AHCI SATA device, and all xen pv windows drivers work as intended.
Quoted 1 line
I used the original author of the patches to get a majority of this to
work:
Quoted 3 lines
Alexey Gerasimenko. I fixed the patches to be in line with the upstream Qemu and Xen versions. Any original issues may still exist; however, I am sure in time they can be improved. If the code doesn't exist then
they
Quoted 66 lines
can't be actively looked at by the community.
I am not an expert on the Q35 chipset or PCIe technology. This is my first patch to this mailing list.
Recap of changes to Qemu, only here for reference:
pc/xen: Xen Q35 support: provide IRQ handling for PCI devices pc/q35: Apply PCI bus BSEL property for Xen PCI device hotplug acpi/ich9: Multiple fixes for S3 support
acpi/pcihp: Allow for machines to hotplug when using Xen isa/lpc_ich9: Write lpc configuration for xen IRQs q35/acpi/xen: Provide ACPI PCI hotplug interface for Xen on Q35 q35/xen: Add Xen platform device support for Q35
q35: Fix incorrect values for PCIEXBAR masks
xen/pt: XenHostPCIDevice: provide functions for PCI Capabilities and
PCIe Extended Capabilities enumeration
xen/pt: avoid reading PCIe device type and cap version multiple times xen/pt: determine the legacy/PCIe mode for a passed through device xen/pt: Xen PCIe passthrough support for Q35: bypass PCIe topology
check
xen/pt: add support for PCIe Extended Capabilities and larger config
space
xen/pt: handle PCIe Extended Capabilities Next register xen/pt: allow to hide PCIe Extended Capabilities
xen/pt: add Vendor-specific PCIe Extended Capability descriptor and
sizing
xen/pt: add fixed-size PCIe Extended Capabilities descriptors xen/pt: add AER PCIe Extended Capability descriptor and sizing xen/pt: add descriptors and size calculation for
RCLD/ACS/PMUX/DPA/MCAST/TPH/DPC PCIe Extended Capabilities
xen/pt: add Resizable BAR PCIe Extended Capability descriptor and
sizing
xen/pt: add VC/VC9/MFVC PCIe Extended Capabilities descriptors and
sizingChanges that would be going to upstream Qemu:
hw/acpi/ich9.c | 22 +- hw/acpi/pcihp.c | 6 +- hw/core/machine.c | 19 + hw/i386/pc_piix.c | 3 +- hw/i386/pc_q35.c | 39 +- hw/i386/xen/xen-hvm.c | 7 +- hw/i386/xen/xen_platform.c | 19 +- hw/ide/ahci.c | 2 +- hw/isa/lpc_ich9.c | 53 +- hw/isa/piix3.c | 2 +- hw/pci-host/q35.c | 28 +- hw/pci/pci.c | 17 + hw/xen/xen-host-pci-device.c | 106 +++- hw/xen/xen-host-pci-device.h | 6 +- hw/xen/xen_pt.c | 49 +- hw/xen/xen_pt.h | 19 +- hw/xen/xen_pt_config_init.c | 1103 ++++++++++++++++++++++++++++++--- include/hw/acpi/ich9.h | 1 + include/hw/acpi/pcihp.h | 2 + include/hw/boards.h | 1 + include/hw/i386/pc.h | 3 + include/hw/pci-host/q35.h | 4 +- include/hw/pci/pci.h | 3 + include/hw/southbridge/ich9.h | 1 + include/hw/xen/xen.h | 4 +- qemu-options.hx | 1 + softmmu/datadir.c | 1 - softmmu/qdev-monitor.c | 3 +- stubs/xen-hw-stub.c | 4 +- 29 files changed, 1396 insertions(+), 132 deletions(-)Quoted 2 lines
*** These patches are not found in this series, if they are supposed to be I will send them here as well. ***
It's unclear, do the QEMU patches depend on the Xen side? I have a suspicion you likely want to post them mostly at the same time, but using two different patch series (one for Xen and one for QEMU).
Quoted 17 lines
Recap of changes to Xen:
libacpi: new DSDT ACPI table for Q35
Makefile: build and use new DSDT table for Q35
hvmloader: add function to query an emulated machine type (i440/Q35)
hvmloader: add ACPI enabling for Q35
hvmloader: add Q35 DSDT table loading
hvmloader: add basic Q35 support
hvmloader: allocate MMCONFIG area in the MMIO hole + minor code
refactoring
hvmloader: seabios dsdt set to load correct config
hvmloader: ovmf dsdt set to load correct config
libxl: Q35 support (new optiondevice_model_machine)
libxl: Xen Platform device support for Q35
libacpi: build ACPI MCFG table if requested
hvmloader: use libacpi to build MCFG table
docs: provide description fordevice_model_machineoptionQuoted 2 lines
Joel Upham (1):
Q35 supportI'm afraid this needs to be split into a patch series, with proper commit messages in order to be considered for review. The current huge patch is impossible to review at all.
Also you need to keep the Signed-off-by of the original author in the patches.
Thanks, Roger.