Add Airoha EN7581 PCIe support
Subsystems (5)
v2 cover Add Airoha EN7581 PCIe support
Introduce support for EN7581 SoC to mediatek-gen3 PCIe driver
Changes since v1:
- remove register magic values
- remove delay magic values
- cosmetics
- fix dts binding for clock/reset
Lorenzo Bianconi (4):
dt-bindings: PCI: mediatek-gen3: add support for Airoha EN7581
PCI: mediatek-gen3: Add mtk_gen3_pcie_pdata data structure
PCI: mediatek-gen3: Rely on reset_bulk APIs for PHY reset lines
PCI: mediatek-gen3: Add Airoha EN7581 support
.../bindings/pci/mediatek-pcie-gen3.yaml | 68 +++++++- drivers/pci/controller/Kconfig | 2 +- drivers/pci/controller/pcie-mediatek-gen3.c | 163 ++++++++++++++++-- 3 files changed, 212 insertions(+), 21 deletions(-)
Signature · 1 line
2.45.2
PATCH v2 1/4 dt-bindings: PCI: mediatek-gen3: add support for Airoha EN7581
Introduce Airoha EN7581 entry in mediatek-gen3 PCIe controller binding
--- .../bindings/pci/mediatek-pcie-gen3.yaml | 68 +++++++++++++++++-- 1 file changed, 63 insertions(+), 5 deletions(-)
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml +63 -5
@@ -53,6 +53,7 @@ properties: - mediatek,mt8195-pcie - const: mediatek,mt8192-pcie - const: mediatek,mt8192-pcie + - const: airoha,en7581-pcie reg: maxItems: 1
@@ -76,20 +77,20 @@ properties: resets: minItems: 1 - maxItems: 2 + maxItems: 3 reset-names: minItems: 1 - maxItems: 2 + maxItems: 3 items: - enum: [ phy, mac ] + enum: [ phy, mac, phy-lane0, phy-lane1, phy-lane2 ] clocks: - minItems: 4 + minItems: 1 maxItems: 6 clock-names: - minItems: 4 + minItems: 1 maxItems: 6 assigned-clocks:
@@ -147,6 +148,9 @@ allOf: const: mediatek,mt8192-pcie then: properties: + clocks: + maxItems: 6 + clock-names: items: - const: pl_250m
@@ -155,6 +159,15 @@ allOf: - const: tl_32k - const: peri_26m - const: top_133m + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + maxItems: 2 + - if: properties: compatible:
@@ -164,6 +177,9 @@ allOf: - mediatek,mt8195-pcie then: properties: + clocks: + maxItems: 6 + clock-names: items: - const: pl_250m
@@ -172,6 +188,15 @@ allOf: - const: tl_32k - const: peri_26m - const: peri_mem + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + maxItems: 2 + - if: properties: compatible:
@@ -180,6 +205,9 @@ allOf: - mediatek,mt7986-pcie then: properties: + clocks: + maxItems: 4 + clock-names: items: - const: pl_250m
@@ -187,6 +215,36 @@ allOf: - const: peri_26m - const: top_133m + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + maxItems: 2 + + - if: + properties: + compatible: + const: airoha,en7581-pcie + then: + properties: + clocks: + maxItems: 1 + + clock-names: + items: + - const: sys-ck + + resets: + maxItems: 3 + + reset-names: + items: + - const: phy-lane0 + - const: phy-lane1 + - const: phy-lane2 + unevaluatedProperties: false examples:
Signature · 1 line
2.45.2
Re: [PATCH v2 1/4] dt-bindings: PCI: mediatek-gen3: add support for Airoha EN7581
Quoted 72 lines · Lorenzo Bianconi
Introduce Airoha EN7581 entry in mediatek-gen3 PCIe controller binding
Signed-off-by Lorenzo Bianconi <[email protected]>--- .../bindings/pci/mediatek-pcie-gen3.yaml | 68 +++++++++++++++++-- 1 file changed, 63 insertions(+), 5 deletions(-)Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml +18
-5@@ -53,6 +53,7 @@ properties: - mediatek,mt8195-pcie - const: mediatek,mt8192-pcie - const: mediatek,mt8192-pcie + - const: airoha,en7581-pcie reg: maxItems: 1@@ -76,20 +77,20 @@ properties: resets: minItems: 1 - maxItems: 2 + maxItems: 3 reset-names: minItems: 1 - maxItems: 2 + maxItems: 3 items: - enum: [ phy, mac ] + enum: [ phy, mac, phy-lane0, phy-lane1, phy-lane2 ] clocks: - minItems: 4 + minItems: 1 maxItems: 6 clock-names: - minItems: 4 + minItems: 1 maxItems: 6 assigned-clocks:@@ -147,6 +148,9 @@ allOf: const: mediatek,mt8192-pcie then: properties: + clocks: + maxItems: 6 + clock-names: items: - const: pl_250m@@ -155,6 +159,15 @@ allOf: - const: tl_32k - const: peri_26m - const: top_133m + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + maxItems: 2 + - if: properties: compatible:
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml allOf: · line 181
Quoted 5 lines
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml +2
-0@@ -164,6 +177,9 @@ allOf: - mediatek,mt8195-pcie then: properties: + clocks: + maxItems: 6
How come this is maxItems and not minItems? The max is always 6, before and after your patch.
Cheers,
Conor.
Re: [PATCH v2 1/4] dt-bindings: PCI: mediatek-gen3: add support for Airoha EN7581
Quoted 73 lines · Lorenzo Bianconi
Quoted 72 lines
Introduce Airoha EN7581 entry in mediatek-gen3 PCIe controller binding
Signed-off-by Lorenzo Bianconi <[email protected]>--- .../bindings/pci/mediatek-pcie-gen3.yaml | 68 +++++++++++++++++-- 1 file changed, 63 insertions(+), 5 deletions(-)Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml +18
-5@@ -53,6 +53,7 @@ properties: - mediatek,mt8195-pcie - const: mediatek,mt8192-pcie - const: mediatek,mt8192-pcie + - const: airoha,en7581-pcie reg: maxItems: 1@@ -76,20 +77,20 @@ properties: resets: minItems: 1 - maxItems: 2 + maxItems: 3 reset-names: minItems: 1 - maxItems: 2 + maxItems: 3 items: - enum: [ phy, mac ] + enum: [ phy, mac, phy-lane0, phy-lane1, phy-lane2 ] clocks: - minItems: 4 + minItems: 1 maxItems: 6 clock-names: - minItems: 4 + minItems: 1 maxItems: 6 assigned-clocks:@@ -147,6 +148,9 @@ allOf: const: mediatek,mt8192-pcie then: properties: + clocks: + maxItems: 6 + clock-names: items: - const: pl_250m@@ -155,6 +159,15 @@ allOf: - const: tl_32k - const: peri_26m - const: top_133m + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + maxItems: 2 + - if: properties: compatible:@@ -164,6 +177,9 @@ allOf:
Quoted 8 lines
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml allOf: · line 181
Quoted 5 lines
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml +2
-0- mediatek,mt8195-pcie then: properties: + clocks: + maxItems: 6How come this is maxItems and not minItems? The max is always 6, before and after your patch.
ack, I will fix in v3
Regards,
Lorenzo
Quoted 3 lines
Cheers,
Conor.
PATCH v2 2/4 PCI: mediatek-gen3: Add mtk_gen3_pcie_pdata data structure
In reply to Lorenzo BianconiIntroduce mtk_gen3_pcie_pdata data structure in order to define multiple callbacks for each supported SoC. This is a preliminary patch to introduce EN7581 PCIe support.
--- drivers/pci/controller/pcie-mediatek-gen3.c | 24 ++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-)
drivers/pci/controller/pcie-mediatek-gen3.c +21 -3
@@ -100,6 +100,16 @@#define PCIE_ATR_TLP_TYPE_MEM PCIE_ATR_TLP_TYPE(0)#define PCIE_ATR_TLP_TYPE_IO PCIE_ATR_TLP_TYPE(2) +struct mtk_gen3_pcie ; + +/** +* struct mtk_gen3_pcie_pdata - differentiate between host generations +* @power_up: pcie power_up callback +*/ +struct mtk_gen3_pcie_pdata { +int (*power_up)(struct mtk_gen3_pcie *pcie); +}; +/** * struct mtk_msi_set - MSI information for each set * @base: IO mapped register base
@@ -131,6 +141,7 @@ struct mtk_msi_set {* @msi_sets: MSI sets information * @lock: lock protecting IRQ bit map * @msi_irq_in_use: bit map for assigned MSI IRQ +* @soc: pointer to SoC-dependent operations */ struct mtk_gen3_pcie {struct device *dev;
@@ -151,6 +162,8 @@ struct mtk_gen3_pcie {struct mtk_msi_set msi_sets[PCIE_MSI_SET_NUM ];struct mutex lock;DECLARE_BITMAP (msi_irq_in_use,PCIE_MSI_IRQS_NUM ); + +const struct mtk_gen3_pcie_pdata *soc; };/* LTSSM state in PCIE_LTSSM_STATUS_REG bit[28:24] */
@@ -904,7 +917,7 @@ static int mtk_pcie_setup(struct mtk_gen3_pcie *pcie)usleep_range (10 ,20 );/* Don't touch the hardware registers before power up */ - err =mtk_pcie_power_up (pcie); + err = pcie->soc->power_up (pcie);if (err)return err;
@@ -939,6 +952,7 @@ static int mtk_pcie_probe(struct platform_device *pdev) pcie =pci_host_bridge_priv (host); pcie->dev = dev; + pcie->soc =device_get_match_data (dev);platform_set_drvdata (pdev, pcie); err =mtk_pcie_setup (pcie);
@@ -1054,7 +1068,7 @@ static int mtk_pcie_resume_noirq(struct device *dev)struct mtk_gen3_pcie *pcie =dev_get_drvdata (dev);int err; - err =mtk_pcie_power_up (pcie); + err = pcie->soc->power_up (pcie);if (err)return err;
@@ -1074,8 +1088,12 @@ static const struct dev_pm_ops mtk_pcie_pm_ops = { mtk_pcie_resume_noirq) }; +static const struct mtk_gen3_pcie_pdata mtk_pcie_soc_mt8192 = { + .power_up = mtk_pcie_power_up, +}; +static const struct of_device_id mtk_pcie_of_match[] = { - { .compatible ="mediatek,mt8192-pcie" }, + { .compatible ="mediatek,mt8192-pcie" , .data = &mtk_pcie_soc_mt8192 }, {}, };MODULE_DEVICE_TABLE (of, mtk_pcie_of_match);
Signature · 1 line
2.45.2
Re: [PATCH v2 2/4] PCI: mediatek-gen3: Add mtk_gen3_pcie_pdata data structure
Il 27/06/24 10:12, Lorenzo Bianconi ha scritto:
Quoted 6 lines
Introduce
mtk_gen3_pcie_pdatadata structure in order to define multiple callbacks for each supported SoC. This is a preliminary patch to introduce EN7581 PCIe support.Tested-by Zhengping Zhang <[email protected]>Signed-off-by Lorenzo Bianconi <[email protected]>
PATCH v2 3/4 PCI: mediatek-gen3: Rely on reset_bulk APIs for PHY reset lines
In reply to Lorenzo BianconiUse reset_bulk APIs to manage PHY reset lines. This is a preliminary patch in order to add Airoha EN7581 PCIe support.
--- drivers/pci/controller/pcie-mediatek-gen3.c | 45 +++++++++++++++------ 1 file changed, 33 insertions(+), 12 deletions(-)
drivers/pci/controller/pcie-mediatek-gen3.c +33 -12
@@ -100,14 +100,21 @@#define PCIE_ATR_TLP_TYPE_MEM PCIE_ATR_TLP_TYPE(0)#define PCIE_ATR_TLP_TYPE_IO PCIE_ATR_TLP_TYPE(2) +#define MAX_NUM_PHY_RESETS 1 +struct mtk_gen3_pcie ;/** * struct mtk_gen3_pcie_pdata - differentiate between host generations * @power_up: pcie power_up callback +* @phy_resets: phy reset lines SoC data. */ struct mtk_gen3_pcie_pdata {int (*power_up)(struct mtk_gen3_pcie *pcie); +struct { +const char *id[MAX_NUM_PHY_RESETS ]; +int num_resets; + } phy_resets; };/**
@@ -128,7 +135,7 @@ struct mtk_msi_set {* @base: IO mapped register base * @reg_base: physical register base * @mac_reset: MAC reset control -* @phy_reset: PHY reset control +* @phy_resets: PHY reset controllers * @phy: PHY controller block * @clks: PCIe clocks * @num_clks: PCIe clocks count for this port
@@ -148,7 +155,7 @@ struct mtk_gen3_pcie {void __iomem *base;phys_addr_t reg_base;struct reset_control *mac_reset; -struct reset_control *phy_reset; +struct reset_control_bulk_data phy_resets[MAX_NUM_PHY_RESETS ];struct phy *phy;struct clk_bulk_data *clks;int num_clks;
@@ -788,10 +795,10 @@ static int mtk_pcie_setup_irq(struct mtk_gen3_pcie *pcie)static int mtk_pcie_parse_port (struct mtk_gen3_pcie *pcie) { +int i, ret, num_resets = pcie->soc->phy_resets.num_resets;struct device *dev = pcie->dev;struct platform_device *pdev =to_platform_device (dev);struct resource *regs; -int ret; regs =platform_get_resource_byname (pdev,IORESOURCE_MEM ,"pcie-mac" );if (!regs)
@@ -804,12 +811,12 @@ static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie) pcie->reg_base = regs->start; - pcie->phy_reset =devm_reset_control_get_optional_exclusive (dev,"phy" ); -if (IS_ERR (pcie->phy_reset)) { - ret =PTR_ERR (pcie->phy_reset); -if (ret != -EPROBE_DEFER ) -dev_err (dev,"failed to get PHY reset\n" ); +for (i =0 ; i < num_resets; i++) + pcie->phy_resets[i].id = pcie->soc->phy_resets.id[i]; + ret =devm_reset_control_bulk_get_optional_shared (dev, num_resets, pcie->phy_resets); +if (ret) { +dev_err (dev,"failed to get PHY bulk reset\n" );return ret; }
@@ -846,7 +853,11 @@ static int mtk_pcie_power_up(struct mtk_gen3_pcie *pcie)int err;/* PHY power on and enable pipe clock */ -reset_control_deassert (pcie->phy_reset); + err =reset_control_bulk_deassert (pcie->soc->phy_resets.num_resets, pcie->phy_resets); +if (err) { +dev_err (dev,"failed to deassert PHYs\n" ); +return err; + } err =phy_init (pcie->phy);if (err) {
@@ -882,7 +893,7 @@ static int mtk_pcie_power_up(struct mtk_gen3_pcie *pcie) err_phy_on:phy_exit (pcie->phy); err_phy_init: -reset_control_assert (pcie->phy_reset); +reset_control_bulk_assert (pcie->soc->phy_resets.num_resets, pcie->phy_resets);return err; }
@@ -897,7 +908,7 @@ static void mtk_pcie_power_down(struct mtk_gen3_pcie *pcie)phy_power_off (pcie->phy);phy_exit (pcie->phy); -reset_control_assert (pcie->phy_reset); +reset_control_bulk_assert (pcie->soc->phy_resets.num_resets, pcie->phy_resets); }static int mtk_pcie_setup (struct mtk_gen3_pcie *pcie)
@@ -908,11 +919,17 @@ static int mtk_pcie_setup(struct mtk_gen3_pcie *pcie)if (err)return err; +/* +* Deassert the line in order to avoid unbalance in deassert_count +* counter since the bulk is shared. +*/ +reset_control_bulk_deassert (pcie->soc->phy_resets.num_resets, pcie->phy_resets);/* * The controller may have been left out of reset by the bootloader * so make sure that we get a clean start by asserting resets here. */ -reset_control_assert (pcie->phy_reset); +reset_control_bulk_assert (pcie->soc->phy_resets.num_resets, pcie->phy_resets); +reset_control_assert (pcie->mac_reset);usleep_range (10 ,20 );
@@ -1090,6 +1107,10 @@ static const struct dev_pm_ops mtk_pcie_pm_ops = {static const struct mtk_gen3_pcie_pdata mtk_pcie_soc_mt8192 = { .power_up = mtk_pcie_power_up, + .phy_resets = { + .id[0 ] ="phy" , + .num_resets =1 , + }, };static const struct of_device_id mtk_pcie_of_match[] = {
Signature · 1 line
2.45.2
Re: [PATCH v2 3/4] PCI: mediatek-gen3: Rely on reset_bulk APIs for PHY reset lines
Il 27/06/24 10:12, Lorenzo Bianconi ha scritto:
Quoted 5 lines
Use
reset_bulkAPIs to manage PHY reset lines. This is a preliminary patch in order to add Airoha EN7581 PCIe support.Tested-by Zhengping Zhang <[email protected]>Signed-off-by Lorenzo Bianconi <[email protected]>
PATCH v2 4/4 PCI: mediatek-gen3: Add Airoha EN7581 support
In reply to Lorenzo BianconiIntroduce support for Airoha EN7581 PCIe controller to mediatek-gen3 PCIe controller driver.
--- drivers/pci/controller/Kconfig | 2 +- drivers/pci/controller/pcie-mediatek-gen3.c | 96 ++++++++++++++++++++- 2 files changed, 96 insertions(+), 2 deletions(-)
drivers/pci/controller/Kconfig +1 -1
@@ -196,7 +196,7 @@ config PCIE_MEDIATEK config PCIE_MEDIATEK_GEN3 tristate "MediaTek Gen3 PCIe controller" - depends on ARCH_MEDIATEK || COMPILE_TEST + depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST depends on PCI_MSI help Adds support for PCIe Gen3 MAC controller for MediaTek SoCs.
drivers/pci/controller/pcie-mediatek-gen3.c +95 -1
140 lines not on this page · raw message
Signature · 1 line
2.45.2
Re: [PATCH v2 4/4] PCI: mediatek-gen3: Add Airoha EN7581 support
Il 27/06/24 10:12, Lorenzo Bianconi ha scritto:
Quoted 27 lines
Introduce support for Airoha EN7581 PCIe controller to mediatek-gen3 PCIe controller driver.
Tested-by Zhengping Zhang <[email protected]>Signed-off-by Lorenzo Bianconi <[email protected]>--- drivers/pci/controller/Kconfig | 2 +- drivers/pci/controller/pcie-mediatek-gen3.c | 96 ++++++++++++++++++++- 2 files changed, 96 insertions(+), 2 deletions(-)drivers/pci/controller/Kconfig +1
-1@@ -196,7 +196,7 @@ config PCIE_MEDIATEK config PCIE_MEDIATEK_GEN3 tristate "MediaTek Gen3 PCIe controller" - depends on ARCH_MEDIATEK || COMPILE_TEST + depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST depends on PCI_MSI help Adds support for PCIe Gen3 MAC controller for MediaTek SoCs.drivers/pci/controller/pcie-mediatek-gen3.c +0
-0
..snip..
drivers/pci/controller/pcie-mediatek-gen3.c static const struct mtk_gen3_pcie_pdata mtk_pcie_soc_mt8192 = { · line 1211
Quoted 4 lines
drivers/pci/controller/pcie-mediatek-gen3.c +2
-0+static const struct of_device_id mtk_pcie_of_match[] = { { .compatible ="mediatek,mt8192-pcie" , .data = &mtk_pcie_soc_mt8192 }, + { .compatible ="airoha,en7581-pcie" , .data = &mtk_pcie_soc_en7581 },
My bad, in the last review I didn't notice that the ordering here is not good.
A ... iroha comes before
M ... ediatek :-)
Please put the airoha entry before the mediatek one, after which:
Quoted 3 lines
{},
};
MODULE_DEVICE_TABLE(of, mtk_pcie_of_match);Re: [PATCH v2 4/4] PCI: mediatek-gen3: Add Airoha EN7581 support
In reply to Lorenzo BianconiHi Lorenzo,
Quoted 51 lines · Lorenzo Bianconi
External email : Please do not click links or open attachments until you have verified the sender or the content.
Introduce support for Airoha EN7581 PCIe controller to mediatek-gen3
PCIe controller driver.Tested-by Zhengping Zhang <[email protected]>Signed-off-by Lorenzo Bianconi <[email protected]>--- drivers/pci/controller/Kconfig | 2 +- drivers/pci/controller/pcie-mediatek-gen3.c | 96 ++++++++++++++++++++- 2 files changed, 96 insertions(+), 2 deletions(-)drivers/pci/controller/Kconfig +1
-1@@ -196,7 +196,7 @@ config PCIE_MEDIATEK config PCIE_MEDIATEK_GEN3 tristate "MediaTek Gen3 PCIe controller" - depends on ARCH_MEDIATEK || COMPILE_TEST + depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST depends on PCI_MSI help Adds support for PCIe Gen3 MAC controller for MediaTek SoCs.drivers/pci/controller/pcie-mediatek-gen3.c +3
-0@@ -7,6 +7,7 @@*/ #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/delay.h> #include <linux/iopoll.h> #include <linux/irq.h> @@ -15,6 +16,8 @@#include <linux/kernel.h> #include <linux/module.h> #include <linux/msi.h> +#include <linux/of_device.h> +#include <linux/of_pci.h> #include <linux/pci.h> #include <linux/phy/phy.h> #include <linux/platform_device.h>
drivers/pci/controller/pcie-mediatek-gen3.c line 35
Quoted 4 lines
drivers/pci/controller/pcie-mediatek-gen3.c +1
-0@@ -29,6 +32,7 @@#define PCI_CLASS (class) (class << 8)#define PCIE_RC_MODE BIT(0) +#define PCIE_EQ_PRESET_01_REF 0x100
Should be PCIE_EQ_PRESET_01_REG
Quoted 14 lines
drivers/pci/controller/pcie-mediatek-gen3.c +0
-0#define PCIE_CFGNUM_REG 0x140#define PCIE_CFG_DEVFN (devfn) ((devfn) & GENMASK(7, 0))#define
PCIE_CFG_BUS(bus)(((bus) << 8) &GENMASK(15, 8))drivers/pci/controller/pcie-mediatek-gen3.c +1
-0@@ -68,6 +72,7 @@#define PCIE_MSI_SET_ENABLE_REG 0x190#define PCIE_MSI_SET_ENABLE GENMASK(PCIE_MSI_SET_NUM - 1, 0) +#define PCIE_PIPE4_PIE8_REG 0x338#define PCIE_MSI_SET_BASE_REG 0xc00#define PCIE_MSI_SET_OFFSET 0x10#define
PCIE_MSI_SET_STATUS_OFFSET0x04
drivers/pci/controller/pcie-mediatek-gen3.c line 111
Quoted 8 lines
drivers/pci/controller/pcie-mediatek-gen3.c +4
-1@@ -100,7 +105,17 @@#define PCIE_ATR_TLP_TYPE_MEM PCIE_ATR_TLP_TYPE(0)#define PCIE_ATR_TLP_TYPE_IO PCIE_ATR_TLP_TYPE(2) -#define MAX_NUM_PHY_RESETS 1 +/* EN7581 */ +#define PCIE_PEXTP_DIG_GLB44_P0_REG 0x10044 +#define PCIE_PEXTP_DIG_LN_RX30_P0_REG 0x15030 +#define PCIE_PEXTP_DIG_LN_RX30_P1_REG 0x15130
These registers belong to PHY, I think they should be added in the phy driver, which is located at drivers/phy/mediatek/phy-mtk-pcie.c.
Quoted 16 lines
drivers/pci/controller/pcie-mediatek-gen3.c +8
-0+ +/* PCIe-PHY initialization delay in ms */ +#define PHY_INIT_TIME_MS 30 +/* PCIe reset line delay in ms */ +#define PCIE_RESET_TIME_MS 100 + +#define MAX_NUM_PHY_RESETS 3struct mtk_gen3_pcie ;@@ -847,6 +862,74 @@ static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie)return 0 ; } +static int mtk_pcie_en7581_power_up (struct mtk_gen3_pcie *pcie)
drivers/pci/controller/pcie-mediatek-gen3.c static int mtk_pcie_parse_port(struct · line 876
Quoted 10 lines
drivers/pci/controller/pcie-mediatek-gen3.c +9
-0+{ +struct device *dev = pcie->dev; +int err; + +/* Wait for bulk assert completion in mtk_pcie_setup */ +mdelay (PCIE_RESET_TIME_MS ); + +/* Setup Tx-Rx detect time */ +writel_relaxed (0x23020133 , pcie->base +PCIE_PEXTP_DIG_GLB44_P0_REG );
Please also add definitions for each field, the layout for PCIE_PEXTP_DIG_GLB44_P0_REG is:
Bit[7:0]
Name: rg_xtp_rxdet_vcm_off_stb_t_sel
Description: Stable Time Selection of tx_cmkp_en De-Assert (DC Common
Mode Turn-Off) During RX Detection, unit: 4 us
Bit[15:8]
Name: rg_xtp_rxdet_en_stb_t_sel
Description: Stable Time Selection of tx_rxdet_en Assert During RX
Detection, unit: 1 us
Bit[23:16]
Name: rg_xtp_rxdet_finish_stb_t_sel
Description: rxdet finish stable time selection, unit: 1 tx250m_ck
Bit[27:24]
Name: rg_xtp_txpd_tx_data_en_dly
Description: ckpd_tx_data_en_sync delay selection, unit: 1 tx250m_ck
Bit[28:28]
Name: rg_xtp_txpd_rxdet_done_cdt
Description: rxdet_done cdt selection, 0: !pipe_tx_detect_rx 1:pipe_phy_status
Bit[31:29]
Name: rg_xtp_rxdet_latch_stb_t_sel
Description: rxdet_latch state stable time selection, unit: 1tx250m_ck
Quoted 5 lines
drivers/pci/controller/pcie-mediatek-gen3.c +3
-0+/* Setup Rx AEQ training time */ +writel_relaxed (0x50500032 , pcie->base +PCIE_PEXTP_DIG_LN_RX30_P0_REG ); + writel_relaxed(0x50500032, pcie->base +
PCIE_PEXTP_DIG_LN_RX30_P1_REG);
Layout for PEXTP_DIG_LN_RX30:
Bit[7:0] rg_xtp_ln_rx_pdown_l1p2_exit_wait_cnt
Bit[8] rg_xtp_ln_rx_pdown_t2rlb_dig_en
Bit[28:16] rg_xtp_ln_rx_pdown_e0_aeqen_wait_us
Quoted 22 lines
drivers/pci/controller/pcie-mediatek-gen3.c +15
-0+ + err =phy_init (pcie->phy); +if (err) { +dev_err (dev,"failed to initialize PHY\n" ); +return err; + } +mdelay (PHY_INIT_TIME_MS ); + + err =phy_power_on (pcie->phy); +if (err) { +dev_err (dev,"failed to power on PHY\n" ); + goto err_phy_on; + } + + err = reset_control_bulk_deassert(pcie->soc-Quoted 1 line
phy_resets.num_resets,
pcie->phy_resets);drivers/pci/controller/pcie-mediatek-gen3.c +6
-0+if (err) { +dev_err (dev,"failed to deassert PHYs\n" ); + goto err_phy_deassert; + } +mdelay (PCIE_RESET_TIME_MS ); +
drivers/pci/controller/pcie-mediatek-gen3.c static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie) · line 908
Quoted 10 lines
drivers/pci/controller/pcie-mediatek-gen3.c +10
-0+pm_runtime_enable (dev); +pm_runtime_get_sync (dev); + + err =clk_bulk_prepare (pcie->num_clks, pcie->clks); +if (err) { +dev_err (dev,"failed to prepare clock\n" ); + goto err_clk_prepare; + } + +writel_relaxed (0x41474147 , pcie->base +PCIE_EQ_PRESET_01_REF );
Bit[6:0] val_ln0_dn
Bit [3:0]: Downstream port transmitter preset Bit [6:4]: Downstream port receiver preset hint
Bit[14:8] val_ln0_up
Bit [11:8]: Upstream port transmitter preset Bit [14:12]: Upstream port receiver preset hint
Bit[22:16] val_ln1_dn
Bit [19:16]: Downstream port transmitter preset Bit [22:20]: Downstream port receiver preset hint
BIt[30:24] val_ln1_up
Bit [27:24]: Upstream port transmitter preset Bit [30:28]: Upstream port receiver preset hint
drivers/pci/controller/pcie-mediatek-gen3.c static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie) · line 909
Quoted 1 line
drivers/pci/controller/pcie-mediatek-gen3.c +1
-0+writel_relaxed (0x1018020f , pcie->base +PCIE_PIPE4_PIE8_REG );
Bit[5:0] k_finetune_max
Bit[7:6] k_finetune_err
Bit[18:8] k_preset_to_use
Bit[19:19] k_phyparam_query
Bit[20:20] k_query_timeout
Bit[31:21] k_preset_to_use_16g
Thanks.
Quoted 53 lines
drivers/pci/controller/pcie-mediatek-gen3.c +15
-0+ + err =clk_bulk_enable (pcie->num_clks, pcie->clks); +if (err) { +dev_err (dev,"failed to prepare clock\n" ); + goto err_clk_enable; + } + +return 0 ; + +err_clk_enable: +clk_bulk_unprepare (pcie->num_clks, pcie->clks); +err_clk_prepare: +pm_runtime_put_sync (dev); +pm_runtime_disable (dev); + reset_control_bulk_assert(pcie->soc->phy_resets.num_resets,
pcie->phy_resets);drivers/pci/controller/pcie-mediatek-gen3.c +19
-0+err_phy_deassert: +phy_power_off (pcie->phy); +err_phy_on: +phy_exit (pcie->phy); + +return err; +} +static int mtk_pcie_power_up (struct mtk_gen3_pcie *pcie) {struct device *dev = pcie->dev;@@ -1113,8 +1196,19 @@ static const struct mtk_gen3_pcie_pdata mtk_pcie_soc_mt8192 = { }, }; +static const struct mtk_gen3_pcie_pdata mtk_pcie_soc_en7581 = { + .power_up = mtk_pcie_en7581_power_up, + .phy_resets = { + .id[0 ] ="phy-lane0" , + .id[1 ] ="phy-lane1" , + .id[2 ] ="phy-lane2" , + .num_resets =3 , + }, +}; +static const struct of_device_id mtk_pcie_of_match[] = { { .compatible ="mediatek,mt8192-pcie" , .data = &mtk_pcie_soc_mt8192 }, + { .compatible ="airoha,en7581-pcie" , .data = &mtk_pcie_soc_en7581 },{},
};
MODULE_DEVICE_TABLE(of, mtk_pcie_of_match);Signature · 1 line
2.45.2
Re: [PATCH v2 4/4] PCI: mediatek-gen3: Add Airoha EN7581 support
Quoted 1 line
Hi Lorenzo,
Hi Jianjun,
Quoted 56 lines · Lorenzo Bianconi
Quoted 54 lines
External email : Please do not click links or open attachments until you have verified the sender or the content.
Introduce support for Airoha EN7581 PCIe controller to mediatek-gen3
PCIe controller driver.Tested-by Zhengping Zhang <[email protected]>Signed-off-by Lorenzo Bianconi <[email protected]>--- drivers/pci/controller/Kconfig | 2 +- drivers/pci/controller/pcie-mediatek-gen3.c | 96 ++++++++++++++++++++- 2 files changed, 96 insertions(+), 2 deletions(-)drivers/pci/controller/Kconfig +1
-1@@ -196,7 +196,7 @@ config PCIE_MEDIATEK config PCIE_MEDIATEK_GEN3 tristate "MediaTek Gen3 PCIe controller" - depends on ARCH_MEDIATEK || COMPILE_TEST + depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST depends on PCI_MSI help Adds support for PCIe Gen3 MAC controller for MediaTek SoCs.drivers/pci/controller/pcie-mediatek-gen3.c +3
-0@@ -7,6 +7,7 @@*/ #include <linux/clk.h> +#include <linux/clk-provider.h> #include <linux/delay.h> #include <linux/iopoll.h> #include <linux/irq.h> @@ -15,6 +16,8 @@#include <linux/kernel.h> #include <linux/module.h> #include <linux/msi.h> +#include <linux/of_device.h> +#include <linux/of_pci.h> #include <linux/pci.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> @@ -29,6 +32,7 @@#define PCI_CLASS (class) (class << 8)#define PCIE_RC_MODE BIT(0)
Quoted 2 lines
drivers/pci/controller/pcie-mediatek-gen3.c line 35
Quoted 1 line
drivers/pci/controller/pcie-mediatek-gen3.c +1
-0+#define PCIE_EQ_PRESET_01_REF 0x100Should be
PCIE_EQ_PRESET_01_REG
ack, I will fix it in v3.
Quoted 18 lines
Quoted 18 lines
drivers/pci/controller/pcie-mediatek-gen3.c +0
-0#define PCIE_CFGNUM_REG 0x140#define PCIE_CFG_DEVFN (devfn) ((devfn) & GENMASK(7, 0))#define
PCIE_CFG_BUS(bus)(((bus) << 8) &GENMASK(15, 8))drivers/pci/controller/pcie-mediatek-gen3.c +1
-0@@ -68,6 +72,7 @@#define PCIE_MSI_SET_ENABLE_REG 0x190#define PCIE_MSI_SET_ENABLE GENMASK(PCIE_MSI_SET_NUM - 1, 0) +#define PCIE_PIPE4_PIE8_REG 0x338#define PCIE_MSI_SET_BASE_REG 0xc00#define PCIE_MSI_SET_OFFSET 0x10#define
PCIE_MSI_SET_STATUS_OFFSET0x04drivers/pci/controller/pcie-mediatek-gen3.c +0
-0@@ -100,7 +105,17 @@#define PCIE_ATR_TLP_TYPE_MEM PCIE_ATR_TLP_TYPE(0)#define PCIE_ATR_TLP_TYPE_IO PCIE_ATR_TLP_TYPE(2)
Quoted 7 lines
drivers/pci/controller/pcie-mediatek-gen3.c line 111
Quoted 5 lines
drivers/pci/controller/pcie-mediatek-gen3.c +4
-1-#define MAX_NUM_PHY_RESETS 1 +/* EN7581 */ +#define PCIE_PEXTP_DIG_GLB44_P0_REG 0x10044 +#define PCIE_PEXTP_DIG_LN_RX30_P0_REG 0x15030 +#define PCIE_PEXTP_DIG_LN_RX30_P1_REG 0x15130These registers belong to PHY, I think they should be added in the phy driver, which is located at
drivers/phy/mediatek/phy-mtk-pcie.c.
ack, I will move this configuration in the pcie-phy driver.
Quoted 107 lines
Quoted 17 lines
drivers/pci/controller/pcie-mediatek-gen3.c +8
-0+ +/* PCIe-PHY initialization delay in ms */ +#define PHY_INIT_TIME_MS 30 +/* PCIe reset line delay in ms */ +#define PCIE_RESET_TIME_MS 100 + +#define MAX_NUM_PHY_RESETS 3struct mtk_gen3_pcie ;@@ -847,6 +862,74 @@ static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie)return 0 ; } +static int mtk_pcie_en7581_power_up (struct mtk_gen3_pcie *pcie)drivers/pci/controller/pcie-mediatek-gen3.c static int mtk_pcie_parse_port(struct · line 876
Quoted 10 lines
drivers/pci/controller/pcie-mediatek-gen3.c +9
-0+{ +struct device *dev = pcie->dev; +int err; + +/* Wait for bulk assert completion in mtk_pcie_setup */ +mdelay (PCIE_RESET_TIME_MS ); + +/* Setup Tx-Rx detect time */ +writel_relaxed (0x23020133 , pcie->base +PCIE_PEXTP_DIG_GLB44_P0_REG );Please also add definitions for each field, the layout for
PCIE_PEXTP_DIG_GLB44_P0_REGis:
Bit[7:0]
Name:rg_xtp_rxdet_vcm_off_stb_t_sel
Description: Stable Time Selection oftx_cmkp_enDe-Assert (DC Common
Mode Turn-Off) During RX Detection, unit: 4 us
Bit[15:8]
Name:rg_xtp_rxdet_en_stb_t_sel
Description: Stable Time Selection oftx_rxdet_enAssert During RX
Detection, unit: 1 us
Bit[23:16]
Name:rg_xtp_rxdet_finish_stb_t_sel
Description: rxdet finish stable time selection, unit: 1tx250m_ck
Bit[27:24]
Name:rg_xtp_txpd_tx_data_en_dly
Description:ckpd_tx_data_en_syncdelay selection, unit: 1tx250m_ck
Bit[28:28]
Name:rg_xtp_txpd_rxdet_done_cdt
Description:rxdet_donecdt selection, 0: !pipe_tx_detect_rx 1:pipe_phy_status
Bit[31:29]
Name:rg_xtp_rxdet_latch_stb_t_sel
Description:rxdet_latchstate stable time selection, unit: 1tx250m_ckQuoted 5 lines
drivers/pci/controller/pcie-mediatek-gen3.c +3
-0+/* Setup Rx AEQ training time */ +writel_relaxed (0x50500032 , pcie->base +PCIE_PEXTP_DIG_LN_RX30_P0_REG ); + writel_relaxed(0x50500032, pcie->base +
PCIE_PEXTP_DIG_LN_RX30_P1_REG);Layout for
PEXTP_DIG_LN_RX30:
Bit[7:0]rg_xtp_ln_rx_pdown_l1p2_exit_wait_cnt
Bit[8]rg_xtp_ln_rx_pdown_t2rlb_dig_en
Bit[28:16]rg_xtp_ln_rx_pdown_e0_aeqen_wait_usQuoted 22 lines
drivers/pci/controller/pcie-mediatek-gen3.c +15
-0+ + err =phy_init (pcie->phy); +if (err) { +dev_err (dev,"failed to initialize PHY\n" ); +return err; + } +mdelay (PHY_INIT_TIME_MS ); + + err =phy_power_on (pcie->phy); +if (err) { +dev_err (dev,"failed to power on PHY\n" ); + goto err_phy_on; + } + + err = reset_control_bulk_deassert(pcie->soc-Quoted 1 line
phy_resets.num_resets,
pcie->phy_resets);drivers/pci/controller/pcie-mediatek-gen3.c +6
-0+if (err) { +dev_err (dev,"failed to deassert PHYs\n" ); + goto err_phy_deassert; + } +mdelay (PCIE_RESET_TIME_MS ); +drivers/pci/controller/pcie-mediatek-gen3.c static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie) · line 908
Quoted 10 lines
drivers/pci/controller/pcie-mediatek-gen3.c +10
-0+pm_runtime_enable (dev); +pm_runtime_get_sync (dev); + + err =clk_bulk_prepare (pcie->num_clks, pcie->clks); +if (err) { +dev_err (dev,"failed to prepare clock\n" ); + goto err_clk_prepare; + } + +writel_relaxed (0x41474147 , pcie->base +PCIE_EQ_PRESET_01_REF );Bit[6:0]
val_ln0_dn
Bit [3:0]: Downstream port transmitter preset Bit [6:4]: Downstream port receiver preset hint
Bit[14:8]val_ln0_up
Bit [11:8]: Upstream port transmitter preset Bit [14:12]: Upstream port receiver preset hint
Bit[22:16]val_ln1_dn
Bit [19:16]: Downstream port transmitter preset Bit [22:20]: Downstream port receiver preset hint
BIt[30:24]val_ln1_up
Bit [27:24]: Upstream port transmitter preset Bit [30:28]: Upstream port receiver preset hint
Quoted 8 lines
drivers/pci/controller/pcie-mediatek-gen3.c static int mtk_pcie_parse_port(struct mtk_gen3_pcie *pcie) · line 909
Quoted 1 line
drivers/pci/controller/pcie-mediatek-gen3.c +1
-0+writel_relaxed (0x1018020f , pcie->base +PCIE_PIPE4_PIE8_REG );Bit[5:0]
k_finetune_max
Bit[7:6]k_finetune_err
Bit[18:8]k_preset_to_use
Bit[19:19]k_phyparam_query
Bit[20:20]k_query_timeout
Bit[31:21]k_preset_to_use_16g
ack, thx for the clarification. I will add them in v4.
Regards,
Lorenzo
Quoted 55 lines
Thanks.
Quoted 53 lines
drivers/pci/controller/pcie-mediatek-gen3.c +15
-0+ + err =clk_bulk_enable (pcie->num_clks, pcie->clks); +if (err) { +dev_err (dev,"failed to prepare clock\n" ); + goto err_clk_enable; + } + +return 0 ; + +err_clk_enable: +clk_bulk_unprepare (pcie->num_clks, pcie->clks); +err_clk_prepare: +pm_runtime_put_sync (dev); +pm_runtime_disable (dev); + reset_control_bulk_assert(pcie->soc->phy_resets.num_resets,
pcie->phy_resets);drivers/pci/controller/pcie-mediatek-gen3.c +19
-0+err_phy_deassert: +phy_power_off (pcie->phy); +err_phy_on: +phy_exit (pcie->phy); + +return err; +} +static int mtk_pcie_power_up (struct mtk_gen3_pcie *pcie) {struct device *dev = pcie->dev;@@ -1113,8 +1196,19 @@ static const struct mtk_gen3_pcie_pdata mtk_pcie_soc_mt8192 = { }, }; +static const struct mtk_gen3_pcie_pdata mtk_pcie_soc_en7581 = { + .power_up = mtk_pcie_en7581_power_up, + .phy_resets = { + .id[0 ] ="phy-lane0" , + .id[1 ] ="phy-lane1" , + .id[2 ] ="phy-lane2" , + .num_resets =3 , + }, +}; +static const struct of_device_id mtk_pcie_of_match[] = { { .compatible ="mediatek,mt8192-pcie" , .data = &mtk_pcie_soc_mt8192 }, + { .compatible ="airoha,en7581-pcie" , .data = &mtk_pcie_soc_en7581 },{},
};
MODULE_DEVICE_TABLE(of, mtk_pcie_of_match);Signature · 1 line
2.45.2