Skip to contentSkip to conversation

net: stmmac: Refactor FPE as a separate module

PATCH Superseded Furong Xu 2 participants 9 messages Oct 23, 2024

Subsystems (4)

v3 of 8 Superseded Latest is v8 →

lore
Share & tools
lore

Furong Xu

author
#0 lore raw

v3 cover net: stmmac: Refactor FPE as a separate module

Refactor FPE implementation by moving common code for DWMAC4 and DWXGMAC into a separate FPE module.

FPE implementation for DWMAC4 and DWXGMAC differs only for:
1) Offset address of MAC_FPE_CTRL_STS and MTL_FPE_CTRL_STS
2) FPRQ(Frame Preemption Residue Queue) field in MAC_RxQ_Ctrl1
3) Bit offset of Frame Preemption Interrupt Enable

Tested on DWMAC CORE 5.20a and DWXGMAC CORE 3.20a

Changes in v3:
1. Drop stmmac_fpe_ops and refactor FPE functions to generic version to avoid function pointers
2. Drop the _SHIFT macro definitions

Changes in v2:
1. Split patches to easily review
2. Use struct as function param to keep param list short
3. Typo fixes in commit message and title

Furong Xu (6):
net: stmmac: Introduce separate files for FPE implementation
net: stmmac: Rework macro definitions for gmac4 and xgmac
net: stmmac: Refactor FPE functions to generic version
net: stmmac: xgmac: Rename XGMAC_RQ to XGMAC_FPRQ
net: stmmac: xgmac: Complete FPE support
net: stmmac: xgmac: Enable FPE for tc-mqprio/tc-taprio

 drivers/net/ethernet/stmicro/stmmac/Makefile  |   2 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac4.h  |   1 -
 .../net/ethernet/stmicro/stmmac/dwmac4_core.c |  11 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac5.c  | 150 -------
 drivers/net/ethernet/stmicro/stmmac/dwmac5.h  |  26 --
 .../net/ethernet/stmicro/stmmac/dwxgmac2.h    |   6 +-
 .../ethernet/stmicro/stmmac/dwxgmac2_core.c   |  31 +-
 drivers/net/ethernet/stmicro/stmmac/hwif.c    |   7 +
 drivers/net/ethernet/stmicro/stmmac/hwif.h    |  20 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  11 +-
 .../ethernet/stmicro/stmmac/stmmac_ethtool.c  |   6 +-
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.c  | 422 ++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.h  |  45 ++
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 152 +------
 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   |   4 +-
 15 files changed, 491 insertions(+), 403 deletions(-)
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h
Signature · 1 line
2.34.1
author
#1 lore raw

PATCH v3 1/6 net: stmmac: Introduce separate files for FPE implementation

By moving FPE related code info separate files, FPE implementation becomes a separate module initially.
No functional change intended.

---
 drivers/net/ethernet/stmicro/stmmac/Makefile  |   2 +-
 .../net/ethernet/stmicro/stmmac/dwmac4_core.c |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac5.c  | 150 --------
 drivers/net/ethernet/stmicro/stmmac/dwmac5.h  |  26 --
 .../net/ethernet/stmicro/stmmac/dwxgmac2.h    |   2 -
 .../ethernet/stmicro/stmmac/dwxgmac2_core.c   |  27 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  10 -
 .../ethernet/stmicro/stmmac/stmmac_ethtool.c  |   2 +-
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.c  | 354 ++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.h  |  45 +++
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 149 +-------
 11 files changed, 405 insertions(+), 363 deletions(-)
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c
 create mode 100644 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h
drivers/net/ethernet/stmicro/stmmac/Makefile +1 -1
index c2f0e91f6bf8..7e46dca90628 100644
@@ -6,7 +6,7 @@ stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o	\
 	      mmc_core.o stmmac_hwtstamp.o stmmac_ptp.o dwmac4_descs.o	\
 	      dwmac4_dma.o dwmac4_lib.o dwmac4_core.o dwmac5.o hwif.o \
 	      stmmac_tc.o dwxgmac2_core.o dwxgmac2_dma.o dwxgmac2_descs.o \
-	      stmmac_xdp.o stmmac_est.o \
+	      stmmac_xdp.o stmmac_est.o stmmac_fpe.o \
 	      $(stmmac-y)
 
 stmmac-$(CONFIG_STMMAC_SELFTESTS) += stmmac_selftests.o
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +1 -0
index e65a65666cc1..4d217926820a 100644
@@ -16,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include "stmmac.h"
+#include "stmmac_fpe.h"
 #include "stmmac_pcs.h"
 #include "dwmac4.h"
 #include "dwmac5.h"
drivers/net/ethernet/stmicro/stmmac/dwmac5.c +0 -150

153 lines not on this page · raw message

drivers/net/ethernet/stmicro/stmmac/dwmac5.h +0 -26
index 6c6eb6790e83..00b151b3b688 100644
@@ -11,15 +11,6 @@
 #define PRTYEN				BIT(1)
 #define TMOUTEN				BIT(0)
 
-#define MAC_FPE_CTRL_STS		0x00000234
-#define TRSP				BIT(19)
-#define TVER				BIT(18)
-#define RRSP				BIT(17)
-#define RVER				BIT(16)
-#define SRSP				BIT(2)
-#define SVER				BIT(1)
-#define EFPE				BIT(0)
-
 #define MAC_PPS_CONTROL			0x00000b70
 #define PPS_MAXIDX(x)			((((x) + 1) * 8) - 1)
 #define PPS_MINIDX(x)			((x) * 8)
@@ -39,12 +30,6 @@
 #define MAC_PPSx_INTERVAL(x)		(0x00000b88 + ((x) * 0x10))
 #define MAC_PPSx_WIDTH(x)		(0x00000b8c + ((x) * 0x10))
 
-#define MTL_FPE_CTRL_STS		0x00000c90
-/* Preemption Classification */
-#define DWMAC5_PREEMPTION_CLASS		GENMASK(15, 8)
-/* Additional Fragment Size of preempted frames */
-#define DWMAC5_ADD_FRAG_SZ		GENMASK(1, 0)
-
 #define MTL_RXP_CONTROL_STATUS		0x00000ca0
 #define RXPI				BIT(31)
 #define NPE				GENMASK(23, 16)
@@ -108,16 +93,5 @@ int dwmac5_rxp_config(void __iomem *ioaddr, struct stmmac_tc_entry *entries,
 int dwmac5_flex_pps_config(void __iomem *ioaddr, int index,
 			   struct stmmac_pps_cfg *cfg, bool enable,
 			   u32 sub_second_inc, u32 systime_flags);
-void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
-			  u32 num_txq, u32 num_rxq,
-			  bool tx_enable, bool pmac_enable);
-void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
-			     struct stmmac_fpe_cfg *cfg,
-			     enum stmmac_mpacket_type type);
-int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
-int dwmac5_fpe_get_add_frag_size(const void __iomem *ioaddr);
-void dwmac5_fpe_set_add_frag_size(void __iomem *ioaddr, u32 add_frag_size);
-int dwmac5_fpe_map_preemption_class(struct net_device *ndev,
-				    struct netlink_ext_ack *extack, u32 pclass);
 
 #endif /* __DWMAC5_H__ */
drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h +0 -2
index 6a2c7d22df1e..917796293c26 100644
@@ -193,8 +193,6 @@
 #define XGMAC_MDIO_ADDR			0x00000200
 #define XGMAC_MDIO_DATA			0x00000204
 #define XGMAC_MDIO_C22P			0x00000220
-#define XGMAC_FPE_CTRL_STS		0x00000280
-#define XGMAC_EFPE			BIT(0)
 #define XGMAC_ADDRx_HIGH(x)		(0x00000300 + (x) * 0x8)
 #define XGMAC_ADDR_MAX			32
 #define XGMAC_AE			BIT(31)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +1 -26
index f519d43738b0..111ba5a524ed 100644
@@ -8,6 +8,7 @@
 #include <linux/crc32.h>
 #include <linux/iopoll.h>
 #include "stmmac.h"
+#include "stmmac_fpe.h"
 #include "stmmac_ptp.h"
 #include "dwxlgmac2.h"
 #include "dwxgmac2.h"
@@ -1504,32 +1505,6 @@ static void dwxgmac2_set_arp_offload(struct mac_device_info *hw, bool en,
 	writel(value, ioaddr + XGMAC_RX_CONFIG);
 }
 
-static void dwxgmac3_fpe_configure(void __iomem *ioaddr,
-				   struct stmmac_fpe_cfg *cfg,
-				   u32 num_txq, u32 num_rxq,
-				   bool tx_enable, bool pmac_enable)
-{
-	u32 value;
-
-	if (!tx_enable) {
-		value = readl(ioaddr + XGMAC_FPE_CTRL_STS);
-
-		value &= ~XGMAC_EFPE;
-
-		writel(value, ioaddr + XGMAC_FPE_CTRL_STS);
-		return;
-	}
-
-	value = readl(ioaddr + XGMAC_RXQ_CTRL1);
-	value &= ~XGMAC_RQ;
-	value |= (num_rxq - 1) << XGMAC_RQ_SHIFT;
-	writel(value, ioaddr + XGMAC_RXQ_CTRL1);
-
-	value = readl(ioaddr + XGMAC_FPE_CTRL_STS);
-	value |= XGMAC_EFPE;
-	writel(value, ioaddr + XGMAC_FPE_CTRL_STS);
-}
-
 const struct stmmac_ops dwxgmac210_ops = {
 	.core_init = dwxgmac2_core_init,
 	.set_mac = dwxgmac2_set_mac,
drivers/net/ethernet/stmicro/stmmac/stmmac.h +0 -10
index ea135203ff2e..816b979e72cc 100644
@@ -146,15 +146,6 @@ struct stmmac_channel {
 	u32 index;
 };
 
-/* FPE link-partner hand-shaking mPacket type */
-enum stmmac_mpacket_type {
-	MPACKET_VERIFY = 0,
-	MPACKET_RESPONSE = 1,
-};
-
-#define STMMAC_FPE_MM_MAX_VERIFY_RETRIES	3
-#define STMMAC_FPE_MM_MAX_VERIFY_TIME_MS	128
-
 struct stmmac_fpe_cfg {
 	/* Serialize access to MAC Merge state between ethtool requests
 	 * and link state updates.
@@ -420,7 +411,6 @@ bool stmmac_eee_init(struct stmmac_priv *priv);
 int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt);
 int stmmac_reinit_ringparam(struct net_device *dev, u32 rx_size, u32 tx_size);
 int stmmac_bus_clks_config(struct stmmac_priv *priv, bool enabled);
-void stmmac_fpe_apply(struct stmmac_priv *priv);
 
 static inline bool stmmac_xdp_is_enabled(struct stmmac_priv *priv)
 {
drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +1 -1
index 2a37592a6281..2792a4c6cbcd 100644
@@ -17,9 +17,9 @@
 #include <linux/net_tstamp.h>
 
 #include "stmmac.h"
+#include "stmmac_fpe.h"
 #include "dwmac_dma.h"
 #include "dwxgmac2.h"
-#include "dwmac5.h"
 
 #define REG_SPACE_SIZE	0x1060
 #define GMAC4_REG_SPACE_SIZE	0x116C
drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c new file +354 -0

354 lines not on this page · raw message

drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h new file +45 -0

45 lines not on this page · raw message

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +2 -147

179 lines not on this page · raw message

Signature · 1 line
2.34.1
author
#3 lore raw

PATCH v3 2/6 net: stmmac: Rework macro definitions for gmac4 and xgmac

In reply to Furong Xu

Rename and add macro definitions to better reuse them in common code.

---
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.c  | 77 ++++++++++---------
 1 file changed, 39 insertions(+), 38 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c +39 -38
index 0a90e8f0df29..70ea475046f0 100644
@@ -9,23 +9,23 @@
 #include "dwmac5.h"
 #include "dwxgmac2.h"
 
-#define MAC_FPE_CTRL_STS		0x00000234
-#define TRSP				BIT(19)
-#define TVER				BIT(18)
-#define RRSP				BIT(17)
-#define RVER				BIT(16)
-#define SRSP				BIT(2)
-#define SVER				BIT(1)
-#define EFPE				BIT(0)
-
-#define MTL_FPE_CTRL_STS		0x00000c90
+#define GMAC5_MAC_FPE_CTRL_STS		0x00000234
+#define XGMAC_MAC_FPE_CTRL_STS		0x00000280
+
+#define GMAC5_MTL_FPE_CTRL_STS		0x00000c90
+#define XGMAC_MTL_FPE_CTRL_STS		0x00001090
 /* Preemption Classification */
-#define DWMAC5_PREEMPTION_CLASS		GENMASK(15, 8)
+#define FPE_MTL_PREEMPTION_CLASS	GENMASK(15, 8)
 /* Additional Fragment Size of preempted frames */
-#define DWMAC5_ADD_FRAG_SZ		GENMASK(1, 0)
+#define FPE_MTL_ADD_FRAG_SZ		GENMASK(1, 0)
 
-#define XGMAC_FPE_CTRL_STS		0x00000280
-#define XGMAC_EFPE			BIT(0)
+#define STMMAC_MAC_FPE_CTRL_STS_TRSP	BIT(19)
+#define STMMAC_MAC_FPE_CTRL_STS_TVER	BIT(18)
+#define STMMAC_MAC_FPE_CTRL_STS_RRSP	BIT(17)
+#define STMMAC_MAC_FPE_CTRL_STS_RVER	BIT(16)
+#define STMMAC_MAC_FPE_CTRL_STS_SRSP	BIT(2)
+#define STMMAC_MAC_FPE_CTRL_STS_SVER	BIT(1)
+#define STMMAC_MAC_FPE_CTRL_STS_EFPE	BIT(0)
 
 void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up)
 {
@@ -185,7 +185,7 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 	u32 value;
 
 	if (tx_enable) {
-		cfg->fpe_csr = EFPE;
+		cfg->fpe_csr = STMMAC_MAC_FPE_CTRL_STS_EFPE;
 		value = readl(ioaddr + GMAC_RXQ_CTRL1);
 		value &= ~GMAC_RXQCTRL_FPRQ;
 		value |= (num_rxq - 1) << GMAC_RXQCTRL_FPRQ_SHIFT;
@@ -193,14 +193,14 @@ void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 	} else {
 		cfg->fpe_csr = 0;
 	}
-	writel(cfg->fpe_csr, ioaddr + MAC_FPE_CTRL_STS);
+	writel(cfg->fpe_csr, ioaddr + GMAC5_MAC_FPE_CTRL_STS);
 
 	value = readl(ioaddr + GMAC_INT_EN);
 
 	if (pmac_enable) {
 		if (!(value & GMAC_INT_FPE_EN)) {
 			/* Dummy read to clear any pending masked interrupts */
-			readl(ioaddr + MAC_FPE_CTRL_STS);
+			readl(ioaddr + GMAC5_MAC_FPE_CTRL_STS);
 
 			value |= GMAC_INT_FPE_EN;
 		}
@@ -221,24 +221,24 @@ int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev)
 	/* Reads from the MAC_FPE_CTRL_STS register should only be performed
 	 * here, since the status flags of MAC_FPE_CTRL_STS are "clear on read"
 	 */
-	value = readl(ioaddr + MAC_FPE_CTRL_STS);
+	value = readl(ioaddr + GMAC5_MAC_FPE_CTRL_STS);
 
-	if (value & TRSP) {
+	if (value & STMMAC_MAC_FPE_CTRL_STS_TRSP) {
 		status |= FPE_EVENT_TRSP;
 		netdev_dbg(dev, "FPE: Respond mPacket is transmitted\n");
 	}
 
-	if (value & TVER) {
+	if (value & STMMAC_MAC_FPE_CTRL_STS_TVER) {
 		status |= FPE_EVENT_TVER;
 		netdev_dbg(dev, "FPE: Verify mPacket is transmitted\n");
 	}
 
-	if (value & RRSP) {
+	if (value & STMMAC_MAC_FPE_CTRL_STS_RRSP) {
 		status |= FPE_EVENT_RRSP;
 		netdev_dbg(dev, "FPE: Respond mPacket is received\n");
 	}
 
-	if (value & RVER) {
+	if (value & STMMAC_MAC_FPE_CTRL_STS_RVER) {
 		status |= FPE_EVENT_RVER;
 		netdev_dbg(dev, "FPE: Verify mPacket is received\n");
 	}
@@ -252,25 +252,26 @@ void dwmac5_fpe_send_mpacket(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 	u32 value = cfg->fpe_csr;
 
 	if (type == MPACKET_VERIFY)
-		value |= SVER;
+		value |= STMMAC_MAC_FPE_CTRL_STS_SVER;
 	else if (type == MPACKET_RESPONSE)
-		value |= SRSP;
+		value |= STMMAC_MAC_FPE_CTRL_STS_SRSP;
 
-	writel(value, ioaddr + MAC_FPE_CTRL_STS);
+	writel(value, ioaddr + GMAC5_MAC_FPE_CTRL_STS);
 }
 
 int dwmac5_fpe_get_add_frag_size(const void __iomem *ioaddr)
 {
-	return FIELD_GET(DWMAC5_ADD_FRAG_SZ, readl(ioaddr + MTL_FPE_CTRL_STS));
+	return FIELD_GET(FPE_MTL_ADD_FRAG_SZ,
+			 readl(ioaddr + GMAC5_MTL_FPE_CTRL_STS));
 }
 
 void dwmac5_fpe_set_add_frag_size(void __iomem *ioaddr, u32 add_frag_size)
 {
 	u32 value;
 
-	value = readl(ioaddr + MTL_FPE_CTRL_STS);
-	writel(u32_replace_bits(value, add_frag_size, DWMAC5_ADD_FRAG_SZ),
-	       ioaddr + MTL_FPE_CTRL_STS);
+	value = readl(ioaddr + GMAC5_MTL_FPE_CTRL_STS);
+	writel(u32_replace_bits(value, add_frag_size, FPE_MTL_ADD_FRAG_SZ),
+	       ioaddr + GMAC5_MTL_FPE_CTRL_STS);
 }
 
 #define ALG_ERR_MSG "TX algorithm SP is not suitable for one-to-many mapping"
@@ -321,9 +322,9 @@ int dwmac5_fpe_map_preemption_class(struct net_device *ndev,
 	}
 
 update_mapping:
-	val = readl(priv->ioaddr + MTL_FPE_CTRL_STS);
-	writel(u32_replace_bits(val, preemptible_txqs, DWMAC5_PREEMPTION_CLASS),
-	       priv->ioaddr + MTL_FPE_CTRL_STS);
+	val = readl(priv->ioaddr + GMAC5_MTL_FPE_CTRL_STS);
+	writel(u32_replace_bits(val, preemptible_txqs, FPE_MTL_PREEMPTION_CLASS),
+	       priv->ioaddr + GMAC5_MTL_FPE_CTRL_STS);
 
 	return 0;
 }
@@ -335,11 +336,11 @@ void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 	u32 value;
 
 	if (!tx_enable) {
-		value = readl(ioaddr + XGMAC_FPE_CTRL_STS);
+		value = readl(ioaddr + XGMAC_MAC_FPE_CTRL_STS);
 
-		value &= ~XGMAC_EFPE;
+		value &= ~STMMAC_MAC_FPE_CTRL_STS_EFPE;
 
-		writel(value, ioaddr + XGMAC_FPE_CTRL_STS);
+		writel(value, ioaddr + XGMAC_MAC_FPE_CTRL_STS);
 		return;
 	}
 
@@ -348,7 +349,7 @@ void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
 	value |= (num_rxq - 1) << XGMAC_RQ_SHIFT;
 	writel(value, ioaddr + XGMAC_RXQ_CTRL1);
 
-	value = readl(ioaddr + XGMAC_FPE_CTRL_STS);
-	value |= XGMAC_EFPE;
-	writel(value, ioaddr + XGMAC_FPE_CTRL_STS);
+	value = readl(ioaddr + XGMAC_MAC_FPE_CTRL_STS);
+	value |= STMMAC_MAC_FPE_CTRL_STS_EFPE;
+	writel(value, ioaddr + XGMAC_MAC_FPE_CTRL_STS);
 }
Signature · 1 line
2.34.1
author
#4 lore raw

PATCH v3 3/6 net: stmmac: Refactor FPE functions to generic version

In reply to Furong Xu

FPE implementation for DWMAC4 and DWXGMAC differs only for:
1) Offset address of MAC_FPE_CTRL_STS and MTL_FPE_CTRL_STS
2) FPRQ(Frame Preemption Residue Queue) field in MAC_RxQ_Ctrl1
3) Bit offset of Frame Preemption Interrupt Enable

Refactor FPE functions to avoid code duplication.

---
 drivers/net/ethernet/stmicro/stmmac/dwmac4.h  |   1 -
 .../net/ethernet/stmicro/stmmac/dwmac4_core.c |  10 --
 .../net/ethernet/stmicro/stmmac/dwxgmac2.h    |   2 +-
 .../ethernet/stmicro/stmmac/dwxgmac2_core.c   |   2 -
 drivers/net/ethernet/stmicro/stmmac/hwif.c    |   7 +
 drivers/net/ethernet/stmicro/stmmac/hwif.h    |  20 +--
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |   1 +
 .../ethernet/stmicro/stmmac/stmmac_ethtool.c  |   4 +-
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.c  | 148 ++++++++++--------
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.h  |  19 +--
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |   3 +-
 11 files changed, 107 insertions(+), 110 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac4.h +0 -1
index 28fff6cab812..0c050324997a 100644
@@ -69,7 +69,6 @@
 #define GMAC_RXQCTRL_TACPQE		BIT(21)
 #define GMAC_RXQCTRL_TACPQE_SHIFT	21
 #define GMAC_RXQCTRL_FPRQ		GENMASK(26, 24)
-#define GMAC_RXQCTRL_FPRQ_SHIFT		24
 
 /* MAC Packet Filtering */
 #define GMAC_PACKET_FILTER_PR		BIT(0)
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +0 -10
index 4d217926820a..c25781874aa7 100644
@@ -1262,11 +1262,6 @@ const struct stmmac_ops dwmac410_ops = {
 	.set_arp_offload = dwmac4_set_arp_offload,
 	.config_l3_filter = dwmac4_config_l3_filter,
 	.config_l4_filter = dwmac4_config_l4_filter,
-	.fpe_configure = dwmac5_fpe_configure,
-	.fpe_send_mpacket = dwmac5_fpe_send_mpacket,
-	.fpe_irq_status = dwmac5_fpe_irq_status,
-	.fpe_get_add_frag_size = dwmac5_fpe_get_add_frag_size,
-	.fpe_set_add_frag_size = dwmac5_fpe_set_add_frag_size,
 	.fpe_map_preemption_class = dwmac5_fpe_map_preemption_class,
 	.add_hw_vlan_rx_fltr = dwmac4_add_hw_vlan_rx_fltr,
 	.del_hw_vlan_rx_fltr = dwmac4_del_hw_vlan_rx_fltr,
@@ -1317,11 +1312,6 @@ const struct stmmac_ops dwmac510_ops = {
 	.set_arp_offload = dwmac4_set_arp_offload,
 	.config_l3_filter = dwmac4_config_l3_filter,
 	.config_l4_filter = dwmac4_config_l4_filter,
-	.fpe_configure = dwmac5_fpe_configure,
-	.fpe_send_mpacket = dwmac5_fpe_send_mpacket,
-	.fpe_irq_status = dwmac5_fpe_irq_status,
-	.fpe_get_add_frag_size = dwmac5_fpe_get_add_frag_size,
-	.fpe_set_add_frag_size = dwmac5_fpe_set_add_frag_size,
 	.fpe_map_preemption_class = dwmac5_fpe_map_preemption_class,
 	.add_hw_vlan_rx_fltr = dwmac4_add_hw_vlan_rx_fltr,
 	.del_hw_vlan_rx_fltr = dwmac4_del_hw_vlan_rx_fltr,
drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h +1 -1
index 917796293c26..efd47db05dbc 100644
@@ -85,7 +85,6 @@
 #define XGMAC_MCBCQ			GENMASK(11, 8)
 #define XGMAC_MCBCQ_SHIFT		8
 #define XGMAC_RQ			GENMASK(7, 4)
-#define XGMAC_RQ_SHIFT			4
 #define XGMAC_UPQ			GENMASK(3, 0)
 #define XGMAC_UPQ_SHIFT			0
 #define XGMAC_RXQ_CTRL2			0x000000a8
@@ -96,6 +95,7 @@
 #define XGMAC_LPIIS			BIT(5)
 #define XGMAC_PMTIS			BIT(4)
 #define XGMAC_INT_EN			0x000000b4
+#define XGMAC_FPEIE			BIT(15)
 #define XGMAC_TSIE			BIT(12)
 #define XGMAC_LPIIE			BIT(5)
 #define XGMAC_PMTIE			BIT(4)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +0 -2
index 111ba5a524ed..de6ffda31a80 100644
@@ -1545,7 +1545,6 @@ const struct stmmac_ops dwxgmac210_ops = {
 	.config_l3_filter = dwxgmac2_config_l3_filter,
 	.config_l4_filter = dwxgmac2_config_l4_filter,
 	.set_arp_offload = dwxgmac2_set_arp_offload,
-	.fpe_configure = dwxgmac3_fpe_configure,
 };
 
 static void dwxlgmac2_rx_queue_enable(struct mac_device_info *hw, u8 mode,
@@ -1602,7 +1601,6 @@ const struct stmmac_ops dwxlgmac2_ops = {
 	.config_l3_filter = dwxgmac2_config_l3_filter,
 	.config_l4_filter = dwxgmac2_config_l4_filter,
 	.set_arp_offload = dwxgmac2_set_arp_offload,
-	.fpe_configure = dwxgmac3_fpe_configure,
 };
 
 int dwxgmac2_setup(struct stmmac_priv *priv)
drivers/net/ethernet/stmicro/stmmac/hwif.c +7 -0
index 88cce28b2f98..cfc50289aed6 100644
@@ -6,6 +6,7 @@
 
 #include "common.h"
 #include "stmmac.h"
+#include "stmmac_fpe.h"
 #include "stmmac_ptp.h"
 #include "stmmac_est.h"
 
@@ -185,6 +186,7 @@ static const struct stmmac_hwif_entry {
 			.ptp_off = PTP_GMAC4_OFFSET,
 			.mmc_off = MMC_GMAC4_OFFSET,
 			.est_off = EST_GMAC4_OFFSET,
+			.fpe_reg = &dwmac5_fpe_reg,
 		},
 		.desc = &dwmac4_desc_ops,
 		.dma = &dwmac4_dma_ops,
@@ -205,6 +207,7 @@ static const struct stmmac_hwif_entry {
 			.ptp_off = PTP_GMAC4_OFFSET,
 			.mmc_off = MMC_GMAC4_OFFSET,
 			.est_off = EST_GMAC4_OFFSET,
+			.fpe_reg = &dwmac5_fpe_reg,
 		},
 		.desc = &dwmac4_desc_ops,
 		.dma = &dwmac410_dma_ops,
@@ -225,6 +228,7 @@ static const struct stmmac_hwif_entry {
 			.ptp_off = PTP_GMAC4_OFFSET,
 			.mmc_off = MMC_GMAC4_OFFSET,
 			.est_off = EST_GMAC4_OFFSET,
+			.fpe_reg = &dwmac5_fpe_reg,
 		},
 		.desc = &dwmac4_desc_ops,
 		.dma = &dwmac410_dma_ops,
@@ -246,6 +250,7 @@ static const struct stmmac_hwif_entry {
 			.ptp_off = PTP_XGMAC_OFFSET,
 			.mmc_off = MMC_XGMAC_OFFSET,
 			.est_off = EST_XGMAC_OFFSET,
+			.fpe_reg = &dwxgmac3_fpe_reg,
 		},
 		.desc = &dwxgmac210_desc_ops,
 		.dma = &dwxgmac210_dma_ops,
@@ -267,6 +272,7 @@ static const struct stmmac_hwif_entry {
 			.ptp_off = PTP_XGMAC_OFFSET,
 			.mmc_off = MMC_XGMAC_OFFSET,
 			.est_off = EST_XGMAC_OFFSET,
+			.fpe_reg = &dwxgmac3_fpe_reg,
 		},
 		.desc = &dwxgmac210_desc_ops,
 		.dma = &dwxgmac210_dma_ops,
@@ -353,6 +359,7 @@ int stmmac_hwif_init(struct stmmac_priv *priv)
 		mac->est = mac->est ? : entry->est;
 
 		priv->hw = mac;
+		priv->fpe_cfg.reg = entry->regs.fpe_reg;
 		priv->ptpaddr = priv->ioaddr + entry->regs.ptp_off;
 		priv->mmcaddr = priv->ioaddr + entry->regs.mmc_off;
 		if (entry->est)
drivers/net/ethernet/stmicro/stmmac/hwif.h +1 -19
index d5a9f01ecac5..64f8ed67dcc4 100644
@@ -420,15 +420,6 @@ struct stmmac_ops {
 				bool en, bool udp, bool sa, bool inv,
 				u32 match);
 	void (*set_arp_offload)(struct mac_device_info *hw, bool en, u32 addr);
-	void (*fpe_configure)(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
-			      u32 num_txq, u32 num_rxq,
-			      bool tx_enable, bool pmac_enable);
-	void (*fpe_send_mpacket)(void __iomem *ioaddr,
-				 struct stmmac_fpe_cfg *cfg,
-				 enum stmmac_mpacket_type type);
-	int (*fpe_irq_status)(void __iomem *ioaddr, struct net_device *dev);
-	int (*fpe_get_add_frag_size)(const void __iomem *ioaddr);
-	void (*fpe_set_add_frag_size)(void __iomem *ioaddr, u32 add_frag_size);
 	int (*fpe_map_preemption_class)(struct net_device *ndev,
 					struct netlink_ext_ack *extack,
 					u32 pclass);
@@ -530,16 +521,6 @@ struct stmmac_ops {
 	stmmac_do_callback(__priv, mac, config_l4_filter, __args)
 #define stmmac_set_arp_offload(__priv, __args...) \
 	stmmac_do_void_callback(__priv, mac, set_arp_offload, __args)
-#define stmmac_fpe_configure(__priv, __args...) \
-	stmmac_do_void_callback(__priv, mac, fpe_configure, __args)
-#define stmmac_fpe_send_mpacket(__priv, __args...) \
-	stmmac_do_void_callback(__priv, mac, fpe_send_mpacket, __args)
-#define stmmac_fpe_irq_status(__priv, __args...) \
-	stmmac_do_callback(__priv, mac, fpe_irq_status, __args)
-#define stmmac_fpe_get_add_frag_size(__priv, __args...) \
-	stmmac_do_callback(__priv, mac, fpe_get_add_frag_size, __args)
-#define stmmac_fpe_set_add_frag_size(__priv, __args...) \
-	stmmac_do_void_callback(__priv, mac, fpe_set_add_frag_size, __args)
 #define stmmac_fpe_map_preemption_class(__priv, __args...) \
 	stmmac_do_void_callback(__priv, mac, fpe_map_preemption_class, __args)
 
@@ -678,6 +659,7 @@ struct stmmac_est_ops {
 	stmmac_do_void_callback(__priv, est, irq_status, __args)
 
 struct stmmac_regs_off {
+	const struct stmmac_fpe_reg *fpe_reg;
 	u32 ptp_off;
 	u32 mmc_off;
 	u32 est_off;
drivers/net/ethernet/stmicro/stmmac/stmmac.h +1 -0
index 816b979e72cc..1d86439b8a14 100644
@@ -152,6 +152,7 @@ struct stmmac_fpe_cfg {
 	 */
 	spinlock_t lock;
 
+	const struct stmmac_fpe_reg *reg;
 	u32 fpe_csr;				/* MAC_FPE_CTRL_STS reg cache */
 
 	enum ethtool_mm_verify_status status;
drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +2 -2
index 2792a4c6cbcd..f2783f7c46f3 100644
@@ -1294,7 +1294,7 @@ static int stmmac_get_mm(struct net_device *ndev,
 	else
 		state->tx_active = false;
 
-	frag_size = stmmac_fpe_get_add_frag_size(priv, priv->ioaddr);
+	frag_size = stmmac_fpe_get_add_frag_size(priv);
 	state->tx_min_frag_size = ethtool_mm_frag_size_add_to_min(frag_size);
 
 	spin_unlock_irqrestore(&priv->fpe_cfg.lock, flags);
@@ -1329,7 +1329,7 @@ static int stmmac_set_mm(struct net_device *ndev, struct ethtool_mm_cfg *cfg,
 	if (!cfg->verify_enabled)
 		fpe_cfg->status = ETHTOOL_MM_VERIFY_STATUS_DISABLED;
 
-	stmmac_fpe_set_add_frag_size(priv, priv->ioaddr, frag_size);
+	stmmac_fpe_set_add_frag_size(priv, frag_size);
 	stmmac_fpe_apply(priv);
 
 	spin_unlock_irqrestore(&fpe_cfg->lock, flags);
drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c +86 -62

254 lines not on this page · raw message

drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h +8 -11
index 25725fd5182f..9c7ddf34de24 100644
@@ -25,21 +25,18 @@ void stmmac_fpe_link_state_handle(struct stmmac_priv *priv, bool is_up);
 void stmmac_fpe_event_status(struct stmmac_priv *priv, int status);
 void stmmac_fpe_init(struct stmmac_priv *priv);
 void stmmac_fpe_apply(struct stmmac_priv *priv);
-
-void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
-			  u32 num_txq, u32 num_rxq,
+void stmmac_fpe_configure(struct stmmac_priv *priv, u32 num_txq, u32 num_rxq,
 			  bool tx_enable, bool pmac_enable);
-void dwmac5_fpe_send_mpacket(void __iomem *ioaddr,
-			     struct stmmac_fpe_cfg *cfg,
+void stmmac_fpe_send_mpacket(struct stmmac_priv *priv,
 			     enum stmmac_mpacket_type type);
-int dwmac5_fpe_irq_status(void __iomem *ioaddr, struct net_device *dev);
-int dwmac5_fpe_get_add_frag_size(const void __iomem *ioaddr);
-void dwmac5_fpe_set_add_frag_size(void __iomem *ioaddr, u32 add_frag_size);
+int stmmac_fpe_irq_status(struct stmmac_priv *priv);
+int stmmac_fpe_get_add_frag_size(struct stmmac_priv *priv);
+void stmmac_fpe_set_add_frag_size(struct stmmac_priv *priv, u32 add_frag_size);
+
 int dwmac5_fpe_map_preemption_class(struct net_device *ndev,
 				    struct netlink_ext_ack *extack, u32 pclass);
 
-void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
-			    u32 num_txq, u32 num_rxq,
-			    bool tx_enable, bool pmac_enable);
+extern const struct stmmac_fpe_reg dwmac5_fpe_reg;
+extern const struct stmmac_fpe_reg dwxgmac3_fpe_reg;
 
 #endif
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +1 -2
index ab547430a717..7874a955ab60 100644
@@ -5944,8 +5944,7 @@ static void stmmac_common_interrupt(struct stmmac_priv *priv)
 				      &priv->xstats, tx_cnt);
 
 	if (priv->dma_cap.fpesel) {
-		int status = stmmac_fpe_irq_status(priv, priv->ioaddr,
-						   priv->dev);
+		int status = stmmac_fpe_irq_status(priv);
 
 		stmmac_fpe_event_status(priv, status);
 	}
Signature · 1 line
2.34.1
#5 lore raw

Re: [PATCH net-next v3 3/6] net: stmmac: Refactor FPE functions to generic version

drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c void stmmac_fpe_apply(struct stmmac_priv *priv) · line 196

Quoted 12 lines · Furong Xu
drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c +6 -2
-void dwmac5_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *cfg,
-			  u32 num_txq, u32 num_rxq,
+void stmmac_fpe_configure(struct stmmac_priv *priv, u32 num_txq, u32 num_rxq,
 			  bool tx_enable, bool pmac_enable)
 {
+	struct stmmac_fpe_cfg *cfg = &priv->fpe_cfg;
+	const struct stmmac_fpe_reg *reg = cfg->reg;
+	void __iomem *ioaddr = priv->ioaddr;
 	u32 value;
 
+	if (!reg)
+		return;

What are all these "if (!reg) return" checks protecting against? At all call sites you ensure that priv->dma_cap.fpesel is true. If defense against driver writers is necessary, check only once at boot time that if priv->dma_cap.fpesel is true, we have a way to handle it (priv->fpe_cfg.reg is set). Or are there still supported DWMAC variants with the FPE hardware capability but without driver support?

Quoted 5 lines
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +0 -0
index ab547430a717..7874a955ab60 100644

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c static void stmmac_common_interrupt(struct stmmac_priv *priv) · line 5950

Quoted 9 lines
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +1 -2
@@ -5944,8 +5944,7 @@ static void stmmac_common_interrupt(struct stmmac_priv *priv)
 				      &priv->xstats, tx_cnt);
 
 	if (priv->dma_cap.fpesel) {
-		int status = stmmac_fpe_irq_status(priv, priv->ioaddr,
-						   priv->dev);
+		int status = stmmac_fpe_irq_status(priv);
 
 		stmmac_fpe_event_status(priv, status);
 	}

I think this coding pattern is illogical, and the code refactoring makes it more apparent. stmmac_common_interrupt() does nothing with "status", it just takes it as a return code from stmmac_fpe_irq_status(), and passes it to stmmac_fpe_event_status(), both of which are in stmmac_fpe.c. Why isn't there a direct tail call from one function to the other, to simplify the external API exposed by stmmac_fpe.h?

Quoted 3 lines
Signature · 1 line
2.34.1
author
#6 lore raw

PATCH v3 4/6 net: stmmac: xgmac: Rename XGMAC_RQ to XGMAC_FPRQ

In reply to Furong Xu

Synopsys XGMAC Databook defines MAC_RxQ_Ctrl1 register:
RQ: Frame Preemption Residue Queue

XGMAC_FPRQ is more readable and more consistent with GMAC4.

---
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h   | 2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h +1 -1
index efd47db05dbc..a04a79003692 100644
@@ -84,7 +84,7 @@
 #define XGMAC_MCBCQEN			BIT(15)
 #define XGMAC_MCBCQ			GENMASK(11, 8)
 #define XGMAC_MCBCQ_SHIFT		8
-#define XGMAC_RQ			GENMASK(7, 4)
+#define XGMAC_FPRQ			GENMASK(7, 4)
 #define XGMAC_UPQ			GENMASK(3, 0)
 #define XGMAC_UPQ_SHIFT			0
 #define XGMAC_RXQ_CTRL2			0x000000a8
drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c +1 -1
index d2ea941370dc..f7d48bf2faed 100644
@@ -373,7 +373,7 @@ const struct stmmac_fpe_reg dwxgmac3_fpe_reg = {
 	.mac_fpe_reg = XGMAC_MAC_FPE_CTRL_STS,
 	.mtl_fpe_reg = XGMAC_MTL_FPE_CTRL_STS,
 	.rxq_ctrl1_reg = XGMAC_RXQ_CTRL1,
-	.fprq_mask = XGMAC_RQ,
+	.fprq_mask = XGMAC_FPRQ,
 	.int_en_reg = XGMAC_INT_EN,
 	.int_en_bit = XGMAC_FPEIE,
 };
Signature · 1 line
2.34.1
author
#7 lore raw

PATCH v3 5/6 net: stmmac: xgmac: Complete FPE support

In reply to Furong Xu

Implement the necessary fpe_map_preemption_class callback for xgmac.

---
 .../ethernet/stmicro/stmmac/dwxgmac2_core.c   |  2 +
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.c  | 43 +++++++++++++++++++
 .../net/ethernet/stmicro/stmmac/stmmac_fpe.h  |  3 ++
 3 files changed, 48 insertions(+)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +2 -0
index de6ffda31a80..9a60a6e8f633 100644
@@ -1545,6 +1545,7 @@ const struct stmmac_ops dwxgmac210_ops = {
 	.config_l3_filter = dwxgmac2_config_l3_filter,
 	.config_l4_filter = dwxgmac2_config_l4_filter,
 	.set_arp_offload = dwxgmac2_set_arp_offload,
+	.fpe_map_preemption_class = dwxgmac3_fpe_map_preemption_class,
 };
 
 static void dwxlgmac2_rx_queue_enable(struct mac_device_info *hw, u8 mode,
@@ -1601,6 +1602,7 @@ const struct stmmac_ops dwxlgmac2_ops = {
 	.config_l3_filter = dwxgmac2_config_l3_filter,
 	.config_l4_filter = dwxgmac2_config_l4_filter,
 	.set_arp_offload = dwxgmac2_set_arp_offload,
+	.fpe_map_preemption_class = dwxgmac3_fpe_map_preemption_class,
 };
 
 int dwxgmac2_setup(struct stmmac_priv *priv)
drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.c +43 -0

49 lines not on this page · raw message

drivers/net/ethernet/stmicro/stmmac/stmmac_fpe.h +3 -0
index 9c7ddf34de24..fe463bb7a535 100644
@@ -35,6 +35,9 @@ void stmmac_fpe_set_add_frag_size(struct stmmac_priv *priv, u32 add_frag_size);
 
 int dwmac5_fpe_map_preemption_class(struct net_device *ndev,
 				    struct netlink_ext_ack *extack, u32 pclass);
+int dwxgmac3_fpe_map_preemption_class(struct net_device *ndev,
+				      struct netlink_ext_ack *extack,
+				      u32 pclass);
 
 extern const struct stmmac_fpe_reg dwmac5_fpe_reg;
 extern const struct stmmac_fpe_reg dwxgmac3_fpe_reg;
Signature · 1 line
2.34.1
author
#8 lore raw

PATCH v3 6/6 net: stmmac: xgmac: Enable FPE for tc-mqprio/tc-taprio

In reply to Furong Xu

The FPE on XGMAC is ready, it is time to update dwxgmac_tc_ops to let user configure FPE via tc-mqprio/tc-taprio.

---
 drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c +2 -2
index 75ad2da1a37f..6a79e6a111ed 100644
@@ -1290,8 +1290,8 @@ const struct stmmac_tc_ops dwxgmac_tc_ops = {
 	.setup_cls_u32 = tc_setup_cls_u32,
 	.setup_cbs = tc_setup_cbs,
 	.setup_cls = tc_setup_cls,
-	.setup_taprio = tc_setup_taprio_without_fpe,
+	.setup_taprio = tc_setup_taprio,
 	.setup_etf = tc_setup_etf,
 	.query_caps = tc_query_caps,
-	.setup_mqprio = tc_setup_mqprio_unimplemented,
+	.setup_mqprio = tc_setup_dwmac510_mqprio,
 };
Signature · 1 line
2.34.1