Skip to contentSkip to conversation

mptcp: improve ADD_ADDR timeout handling

PATCH In review Geliang Tang 3 participants 8 messages Aug 12, 2025 – Sep 2, 2025

Subsystems (4)
lore
Share & tools
lore

Geliang Tang

author reviewer
#0 lore raw

v4 cover mptcp: improve ADD_ADDR timeout handling

From: Geliang Tang <[email protected]>

v4:
- rollback to v2, just use icsk->icsk_rto.

Depends on:
- mptcp: disable add_addr retrans, v2

Based-on: <[email protected]>

v3:
- a new patch, remove duplicate sk_reset_timer call
- use __tcp_set_rto() * 2 instead of icsk->icsk_rto
- update selftests.
- https://patchwork.kernel.org/project/mptcp/cover/[email protected]/

v2:
- do not rename add_addr_timeout
- use icsk->icsk_rto instead of tp->srtt_us
- increase the time after each retransmission
- https://patchwork.kernel.org/project/mptcp/patch/40706ad511220729207ccd7cf48e320e4d0d7dea.1754028199.git.tanggeliang@kylinos.cn/

v1:
- https://patchwork.kernel.org/project/mptcp/cover/[email protected]/

Geliang Tang (2):
mptcp: make ADD_ADDR retransmission timeout adaptive
selftests: mptcp: remove add_addr_timeout settings

 Documentation/networking/mptcp-sysctl.rst     |  4 +--
 net/mptcp/pm.c                                | 28 ++++++++++++++++---
 .../testing/selftests/net/mptcp/mptcp_join.sh |  3 --
 3 files changed, 26 insertions(+), 9 deletions(-)
Signature · 1 line
2.48.1
author reviewer
#1 lore raw

PATCH v4 1/2 mptcp: make ADD_ADDR retransmission timeout adaptive

From: Geliang Tang <[email protected]>

Currently the ADD_ADDR option is retransmitted with a fixed timeout. This patch makes the retransmission timeout adaptive by using the maximum RTO among all the subflows, while still capping it at the configured maximum value (add_addr_timeout_max). This improves responsiveness when establishing new subflows.

Specifically:
1. Adds mptcp_adjust_add_addr_timeout() helper to compute the adaptive timeout.
2. Uses maximum subflow RTO (icsk_rto) when available.
3. Applies exponential backoff based on retransmission count.
4. Maintains fallback to configured max timeout when no RTO data exists.

---
 Documentation/networking/mptcp-sysctl.rst |  4 ++--
 net/mptcp/pm.c                            | 28 +++++++++++++++++++----
 2 files changed, 26 insertions(+), 6 deletions(-)
Documentation/networking/mptcp-sysctl.rst +2 -2
index 1683c139821e..2b8e8fb99ee2 100644
@@ -8,8 +8,8 @@ MPTCP Sysfs variables
 ===============================
 
 add_addr_timeout - INTEGER (seconds)
-	Set the timeout after which an ADD_ADDR control message will be
-	resent to an MPTCP peer that has not acknowledged a previous
+	Set the maximum value of timeout after which an ADD_ADDR control message
+	will be resent to an MPTCP peer that has not acknowledged a previous
 	ADD_ADDR message.
 
 	Do not retransmit if set to 0.
net/mptcp/pm.c +24 -4
index e6dcc5b62645..02dfb379417e 100644
@@ -268,6 +268,27 @@ int mptcp_pm_mp_prio_send_ack(struct mptcp_sock *msk,
 	return -EINVAL;
 }
 
+static unsigned int mptcp_adjust_add_addr_timeout(struct mptcp_sock *msk)
+{
+	const struct net *net = sock_net((struct sock *)msk);
+	unsigned int rto = mptcp_get_add_addr_timeout(net);
+	struct mptcp_subflow_context *subflow;
+	unsigned int max = 0;
+
+	mptcp_for_each_subflow(msk, subflow) {
+		struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
+		struct inet_connection_sock *icsk = inet_csk(ssk);
+
+		if (icsk->icsk_rto > max)
+			max = icsk->icsk_rto;
+	}
+
+	if (max && max < rto)
+		rto = max;
+
+	return rto;
+}
+
 static void mptcp_pm_add_timer(struct timer_list *timer)
 {
 	struct mptcp_pm_add_entry *entry = timer_container_of(entry, timer,
@@ -292,7 +313,7 @@ static void mptcp_pm_add_timer(struct timer_list *timer)
 		goto out;
 	}
 
-	timeout = mptcp_get_add_addr_timeout(sock_net(sk));
+	timeout = mptcp_adjust_add_addr_timeout(msk);
 	if (!timeout)
 		goto out;
 
@@ -307,7 +328,7 @@ static void mptcp_pm_add_timer(struct timer_list *timer)
 
 	if (entry->retrans_times < ADD_ADDR_RETRANS_MAX)
 		sk_reset_timer(sk, timer,
-			       jiffies + timeout);
+			       jiffies + (timeout << entry->retrans_times));
 
 	spin_unlock_bh(&msk->pm.lock);
 
@@ -348,7 +369,6 @@ bool mptcp_pm_alloc_anno_list(struct mptcp_sock *msk,
 {
 	struct mptcp_pm_add_entry *add_entry = NULL;
 	struct sock *sk = (struct sock *)msk;
-	struct net *net = sock_net(sk);
 	unsigned int timeout;
 
 	lockdep_assert_held(&msk->pm.lock);
@@ -374,7 +394,7 @@ bool mptcp_pm_alloc_anno_list(struct mptcp_sock *msk,
 
 	timer_setup(&add_entry->add_timer, mptcp_pm_add_timer, 0);
 reset_timer:
-	timeout = mptcp_get_add_addr_timeout(net);
+	timeout = mptcp_adjust_add_addr_timeout(msk);
 	if (timeout)
 		sk_reset_timer(sk, &add_entry->add_timer, jiffies + timeout);
 
Signature · 1 line
2.48.1
maintainer
#2 lore raw

Re: [PATCH mptcp-next v4 1/2] mptcp: make ADD_ADDR retransmission timeout adaptive

Hi Geliang,

Quoted 8 lines · Geliang Tang

From: Geliang Tang <[email protected]>

Currently the ADD_ADDR option is retransmitted with a fixed timeout. This patch makes the retransmission timeout adaptive by using the maximum RTO among all the subflows, while still capping it at the configured maximum value (add_addr_timeout_max). This improves responsiveness when establishing new subflows.

Quoted 6 lines

Specifically:
1. Adds mptcp_adjust_add_addr_timeout() helper to compute the adaptive timeout.
2. Uses maximum subflow RTO (icsk_rto) when available.
3. Applies exponential backoff based on retransmission count.
4. Maintains fallback to configured max timeout when no RTO data exists.

I might be good to add a note about the behavioural change:

This slightly change the behaviour of the MPTCP "add_addr_timeout" sysctl knob to be used as a maximum instead of a fixed value, but this is seen as an improvement: the ADD_ADDR might be sent quicker than before to improve the overall MPTCP connection. Also, the default value is set at 2 min, which was way too big, and caused the ADD_ADDR not to be retransmitted for connections shorter than 2 minutes.

Quoted 13 lines
---
 Documentation/networking/mptcp-sysctl.rst |  4 ++--
 net/mptcp/pm.c                            | 28 +++++++++++++++++++----
 2 files changed, 26 insertions(+), 6 deletions(-)
Documentation/networking/mptcp-sysctl.rst +0 -0
index 1683c139821e..2b8e8fb99ee2 100644

Documentation/networking/mptcp-sysctl.rst MPTCP Sysfs variables · line 13

Quoted 8 lines
Documentation/networking/mptcp-sysctl.rst +2 -2
@@ -8,8 +8,8 @@ MPTCP Sysfs variables
 ===============================
 
 add_addr_timeout - INTEGER (seconds)
-	Set the timeout after which an ADD_ADDR control message will be
-	resent to an MPTCP peer that has not acknowledged a previous
+	Set the maximum value of timeout after which an ADD_ADDR control message
+	will be resent to an MPTCP peer that has not acknowledged a previous
 	ADD_ADDR message.

I suggest adding this at the end:

A dynamically estimated retransmission timeout based on the estimated connection round-trip-time is used if this value is lower than the maximum one.

I can do that when applying the patch. I can update the text if needed later on.

Cheers,
Matt

Signature · 1 line
Sponsored by the NGI0 Core fund.
author reviewer
#3 lore raw

PATCH v4 2/2 selftests: mptcp: remove add_addr_timeout settings

In reply to Geliang Tang

From: Geliang Tang <[email protected]>

Now that add_addr_timeout can be dynamically adjusted, there is no need to set specific timeout values in the mptcp_join.sh tests. This patch removes the explicit sysctl settings for net.mptcp.add_addr_timeout from the test scripts.

The change simplifies the test setup and ensures the tests work with the default or dynamically adjusted timeout values.

---
 tools/testing/selftests/net/mptcp/mptcp_join.sh | 3 ---
 1 file changed, 3 deletions(-)
tools/testing/selftests/net/mptcp/mptcp_join.sh +0 -3
index 82cae37d9c20..e85bb62046e0 100755
@@ -347,8 +347,6 @@ reset_with_add_addr_timeout()
 		tables="${ip6tables}"
 	fi
 
-	ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
-
 	if ! ip netns exec $ns2 $tables -A OUTPUT -p tcp \
 			-m tcp --tcp-option 30 \
 			-m bpf --bytecode \
@@ -2183,7 +2181,6 @@ signal_address_tests()
 		pm_nl_add_endpoint $ns2 10.0.4.2 flags signal
 
 		# the peer could possibly miss some addr notification, allow retransmission
-		ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
 		speed=slow \
 			run_tests $ns1 $ns2 10.0.1.1
 
Signature · 1 line
2.48.1
maintainer
#4 lore raw

Re: [PATCH mptcp-next v4 2/2] selftests: mptcp: remove add_addr_timeout settings

Hi Geliang,

Quoted 6 lines · Geliang Tang

From: Geliang Tang <[email protected]>

Now that add_addr_timeout can be dynamically adjusted, there is no need to set specific timeout values in the mptcp_join.sh tests. This patch removes the explicit sysctl settings for net.mptcp.add_addr_timeout from the test scripts.

I don't think we should remove them: when looking at mptcp_join.sh, I see that chk_add_nr() and chk_add_tx_nr() are more tolerant with retransmissions.

Linked to that, I see that some tests are failing because too many ADD_ADDR are seen:

https://github.com/multipath-tcp/mptcp_net-next/actions/runs/17391054770
https://netdev-3.bots.linux.dev/vmksft-mptcp-dbg/results/280241/1-mptcp-join-sh/stdout
https://netdev-3.bots.linux.dev/vmksft-mptcp-dbg/results/279881/1-mptcp-join-sh/stdout

I wonder if it would not be better to always check for fewer ADD_ADDR than expected.

Also, for this one:

https://netdev-3.bots.linux.dev/vmksft-mptcp-dbg/results/277181/1-mptcp-join-sh/stdout

Probably we should mark the test as "slow".

I will try to look at that.

Cheers,
Matt

Signature · 1 line
Sponsored by the NGI0 Core fund.
#5 lore raw
In reply to Geliang Tang

Hi Geliang,

Thank you for your modifications, that's great!

Our CI did some validations and here is its report:

- KVM Validation: normal: Unstable: 1 failed test(s): packetdrill_add_addr 🔴
- KVM Validation: debug: Success! ✅
- KVM Validation: btf-normal (only bpftest_all): Success! ✅
- KVM Validation: btf-debug (only bpftest_all): Success! ✅
- Task: https://github.com/multipath-tcp/mptcp_net-next/actions/runs/16904044239

Initiator: Patchew Applier
Commits: https://github.com/multipath-tcp/mptcp_net-next/commits/9cc8618373f4
Patchwork: https://patchwork.kernel.org/project/mptcp/list/?series=990438

If there are some issues, you can reproduce them using the same environment as the one used by the CI thanks to a docker image, e.g.:

    $ cd [kernel source code]
    $ docker run -v "${PWD}:${PWD}:rw" -w "${PWD}" --privileged --rm -it \
        --pull always mptcp/mptcp-upstream-virtme-docker:latest \
        auto-normal

For more details:

https://github.com/multipath-tcp/mptcp-upstream-virtme-docker

Please note that despite all the efforts that have been already done to have a stable tests suite when executed on a public CI like here, it is possible some reported issues are not due to your modifications. Still, do not hesitate to help us improve that ;-)

Cheers,
MPTCP GH Action bot
Bot operated by Matthieu Baerts (NGI0 Core)

maintainer Reviewed-by on the v4 series
#6 lore raw
In reply to Geliang Tang

Hi Geliang,

Quoted 4 lines · Geliang Tang

From: Geliang Tang <[email protected]>

v4:
- rollback to v2, just use icsk->icsk_rto.

Thank you for the v4. Thanks to the previous measurements you did, the new version looks good to me:

I have one small comment in patch 1/2, but that's not blocking.

Cheers,
Matt

Signature · 1 line
Sponsored by the NGI0 Core fund.
maintainer
#7 lore raw

Hi Geliang,

Quoted 8 lines · Matthieu Baerts

Hi Geliang,

Quoted 4 lines · Geliang Tang

From: Geliang Tang <[email protected]>

v4:
- rollback to v2, just use icsk->icsk_rto.

Quoted 6 lines

Thank you for the v4. Thanks to the previous measurements you did, the new version looks good to me:

I have one small comment in patch 1/2, but that's not blocking.

Now in our tree (with this suggestion ↑ -- feat. for -next):

New patches for t/upstream:
- 34c96ea5123b: mptcp: make ADD_ADDR retransmission timeout adaptive
- 5d56ac514943: selftests: mptcp: remove add_addr_timeout settings
- Results: d89b1338067d..de0b36f41cae (export)

Tests are now in progress:

- export:
https://github.com/multipath-tcp/mptcp_net-next/commit/b44eb4c28d8623dfa68674caab04d9f7f07846ef/checks

Cheers,
Matt

Signature · 1 line
Sponsored by the NGI0 Core fund.