Remove last users of v4l2-clk and remove v4l2-clk
Subsystems (6)
v2 cover Remove last users of v4l2-clk and remove v4l2-clk
The V4L2 temporary clock helper API is used by just one last capture driver, pxa-camera, which registers a dummy clock; and then by just a few sensor drivers, consuming clocks through the v4l2-clk API.
It's possible to convert these few last users, and so remove the v4l2-clk API, which hasn't been used for a few years.
The sensor drivers are already using the CCF API,
which v4l2-clk API uses as fallback.
To convert the pxa-camera driver, a fixed-rate clock is registered for the mach-based platforms that still exist, for mt9m111 to work (the only sensor that PXA currently registers).
Ezequiel Garcia (6):
media: mach-pxa: Register the camera sensor fixed-rate clock
media: pxa_camera: Drop the v4l2-clk clock register
media: ov9640: Use the generic clock framework
media: mt9m111: Use the generic clock framework
media: ov6650: Use the generic clock framework
media: Remove the legacy v4l2-clk API
.../driver-api/media/v4l2-clocks.rst | 31 -- Documentation/driver-api/media/v4l2-core.rst | 1 - arch/arm/mach-pxa/devices.c | 8 + drivers/media/i2c/mt9m111.c | 17 +- drivers/media/i2c/ov6650.c | 28 +- drivers/media/i2c/ov9640.c | 15 +- drivers/media/i2c/ov9640.h | 2 +- drivers/media/platform/pxa_camera.c | 30 +- drivers/media/v4l2-core/Makefile | 2 +- drivers/media/v4l2-core/v4l2-clk.c | 321 ------------------ include/media/v4l2-clk.h | 73 ---- 11 files changed, 35 insertions(+), 493 deletions(-) delete mode 100644 Documentation/driver-api/media/v4l2-clocks.rst delete mode 100644 drivers/media/v4l2-core/v4l2-clk.c delete mode 100644 include/media/v4l2-clk.h
Signature · 1 line
2.29.2
PATCH v2 1/6 media: mach-pxa: Register the camera sensor fixed-rate clock
The pxa-camera capture driver currently registers a v4l2-clk clock, named "mclk", to represent the mt9m111 sensor clock.
Register a proper fixed-rate clock using the generic clock framework, which will allow to remove the v4l2-clk clock in the pxa-camera driver in a follow-up commit.
---
Quoting Arnd:
"""
If there are no objections to the change itself, please take it through the v4l2 git tree.
"""
arch/arm/mach-pxa/devices.c | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm/mach-pxa/devices.c +8 -0
@@ -4,6 +4,7 @@#include <linux/init.h> #include <linux/platform_device.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/spi/pxa2xx_spi.h>
@@ -634,6 +635,13 @@ static struct platform_device pxa27x_device_camera = {void __init pxa_set_camera_info (struct pxacamera_platform_data *info) { +struct clk *mclk; + +/* Register a fixed-rate clock for camera sensors. */ + mclk =clk_register_fixed_rate (NULL ,"pxa_camera_clk" ,NULL ,0 , + info->mclk_10khz *10000 ); +if (!IS_ERR (mclk)) +clkdev_create (mclk,"mclk" ,NULL );pxa_register_device (&pxa27x_device_camera, info); }
Signature · 1 line
2.29.2
Re: [PATCH v2 1/6] media: mach-pxa: Register the camera sensor fixed-rate clock
Dne 12. 01. 21 v 20:49 Ezequiel Garcia napsal(a):
Quoted 46 lines
The pxa-camera capture driver currently registers a v4l2-clk clock, named "mclk", to represent the mt9m111 sensor clock.
Register a proper fixed-rate clock using the generic clock framework, which will allow to remove the v4l2-clk clock in the pxa-camera driver in a follow-up commit.
Signed-off-by Ezequiel Garcia <[email protected]>---
Quoting Arnd:
"""
If there are no objections to the change itself, please take it through the v4l2 git tree.
"""arch/arm/mach-pxa/devices.c | 8 ++++++++ 1 file changed, 8 insertions(+)arch/arm/mach-pxa/devices.c +8
-0@@ -4,6 +4,7 @@#include <linux/init.h> #include <linux/platform_device.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/spi/pxa2xx_spi.h> @@ -634,6 +635,13 @@ static struct platform_device pxa27x_device_camera = {void __init pxa_set_camera_info (struct pxacamera_platform_data *info) { +struct clk *mclk; + +/* Register a fixed-rate clock for camera sensors. */ + mclk =clk_register_fixed_rate (NULL ,"pxa_camera_clk" ,NULL ,0 , + info->mclk_10khz *10000 ); +if (!IS_ERR (mclk)) +clkdev_create (mclk,"mclk" ,NULL );pxa_register_device (&pxa27x_device_camera, info); }
Sakari Ailus
maintainerRe: [PATCH v2 1/6] media: mach-pxa: Register the camera sensor fixed-rate clock
In reply to Ezequiel GarciaHi Ezequiel,
Thanks for the patch.
Quoted 6 lines · Ezequiel Garcia
The pxa-camera capture driver currently registers a v4l2-clk clock, named "mclk", to represent the mt9m111 sensor clock.
Register a proper fixed-rate clock using the generic clock framework, which will allow to remove the v4l2-clk clock in the pxa-camera driver in a follow-up commit.
Where is the clock generated?
If it's the same device, shouldn't it be registered in the pxa_camera driver?
Quoted 39 lines
Signed-off-by Ezequiel Garcia <[email protected]>---
Quoting Arnd:
"""
If there are no objections to the change itself, please take it through the v4l2 git tree.
"""arch/arm/mach-pxa/devices.c | 8 ++++++++ 1 file changed, 8 insertions(+)arch/arm/mach-pxa/devices.c +8
-0@@ -4,6 +4,7 @@#include <linux/init.h> #include <linux/platform_device.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/spi/pxa2xx_spi.h> @@ -634,6 +635,13 @@ static struct platform_device pxa27x_device_camera = {void __init pxa_set_camera_info (struct pxacamera_platform_data *info) { +struct clk *mclk; + +/* Register a fixed-rate clock for camera sensors. */ + mclk =clk_register_fixed_rate (NULL ,"pxa_camera_clk" ,NULL ,0 , + info->mclk_10khz *10000 ); +if (!IS_ERR (mclk)) +clkdev_create (mclk,"mclk" ,NULL );pxa_register_device (&pxa27x_device_camera, info); }
Signature · 3 lines
Kind regards, Sakari Ailus
Re: [PATCH v2 1/6] media: mach-pxa: Register the camera sensor fixed-rate clock
Quoted 8 lines · Sakari Ailus
Hi Ezequiel,
Thanks for the patch.
Quoted 3 lines · Ezequiel Garcia
The pxa-camera capture driver currently registers a v4l2-clk clock, named "mclk", to represent the mt9m111 sensor clock.
Quoted 9 lines
Quoted 3 lines
Register a proper fixed-rate clock using the generic clock framework, which will allow to remove the v4l2-clk clock in the pxa-camera driver in a follow-up commit.
Where is the clock generated?
If it's the same device, shouldn't it be registered in the
pxa_cameradriver?
Apparently, as Petr explained, the PXA camera controller can provide a clock.
However, it seems to me this is not necesarily the only way to provide a clock to a sensor, is it?
Moreover, doing the proper clock conversion in the PXA driver doesn't seem trivial and I don't have hardware to test it.
I'd rather keep things simple, and just register a fixed-rate clock at mach-pxa level, which will be removed anyway once these non-DT platforms are finally converted to DT or dropped.
This way is at least a tiny bit less ugly than the current dummy v4l2-clk.
Thanks,
Ezequiel
Quoted 40 lines
Quoted 39 lines
Signed-off-by Ezequiel Garcia <[email protected]>---
Quoting Arnd:
"""
If there are no objections to the change itself, please take it through the v4l2 git tree.
"""arch/arm/mach-pxa/devices.c | 8 ++++++++
1 file changed, 8 insertions(+)arch/arm/mach-pxa/devices.c +1
-0@@ -4,6 +4,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/spi/pxa2xx_spi.h>@@ -634,6 +635,13 @@ static struct platform_device pxa27x_device_camera = {
void__initpxa_set_camera_info(struct pxacamera_platform_data *info){
+ struct clk *mclk;
+
+ /* Register a fixed-rate clock for camera sensors. */ + mclk = clk_register_fixed_rate(NULL, "pxa_camera_clk", NULL, 0, +info->mclk_10khz* 10000); + if (!IS_ERR(mclk))
+ clkdev_create(mclk, "mclk", NULL);pxa_register_device(&pxa27x_device_camera, info);
}
Sakari Ailus
maintainerRe: [PATCH v2 1/6] media: mach-pxa: Register the camera sensor fixed-rate clock
Hi Ezequiel,
Quoted 19 lines · Ezequiel Garcia
Quoted 8 lines · Sakari Ailus
Hi Ezequiel,
Thanks for the patch.
Quoted 3 lines · Ezequiel Garcia
The pxa-camera capture driver currently registers a v4l2-clk clock, named "mclk", to represent the mt9m111 sensor clock.
Quoted 9 lines
Quoted 3 lines
Register a proper fixed-rate clock using the generic clock framework, which will allow to remove the v4l2-clk clock in the pxa-camera driver in a follow-up commit.
Where is the clock generated?
If it's the same device, shouldn't it be registered in the
pxa_cameradriver?
Quoted 5 lines
Apparently, as Petr explained, the PXA camera controller can provide a clock.
However, it seems to me this is not necesarily the only way to provide a clock to a sensor, is it?
It isn't. But that's what the clock framework is for.
Quoted 3 lines
Moreover, doing the proper clock conversion in the PXA driver doesn't seem trivial and I don't have hardware to test it.
I guess it's possible to do that later, too. The platform appears to rely still on platform data, too.
This set is still a major improvement, to get rid of v4l2-clk.
Quoted 54 lines
I'd rather keep things simple, and just register a fixed-rate clock at mach-pxa level, which will be removed anyway once these non-DT platforms are finally converted to DT or dropped.
This way is at least a tiny bit less ugly than the current dummy v4l2-clk.
Thanks,
EzequielQuoted 40 lines
Quoted 39 lines
Signed-off-by Ezequiel Garcia <[email protected]>---
Quoting Arnd:
"""
If there are no objections to the change itself, please take it through the v4l2 git tree.
"""arch/arm/mach-pxa/devices.c | 8 ++++++++
1 file changed, 8 insertions(+)arch/arm/mach-pxa/devices.c +1
-0@@ -4,6 +4,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/clkdev.h> +#include <linux/clk-provider.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> #include <linux/spi/pxa2xx_spi.h>@@ -634,6 +635,13 @@ static struct platform_device pxa27x_device_camera = {
void__initpxa_set_camera_info(struct pxacamera_platform_data *info){
+ struct clk *mclk;
+
+ /* Register a fixed-rate clock for camera sensors. */ + mclk = clk_register_fixed_rate(NULL, "pxa_camera_clk", NULL, 0, +info->mclk_10khz* 10000); + if (!IS_ERR(mclk))
+ clkdev_create(mclk, "mclk", NULL);pxa_register_device(&pxa27x_device_camera, info);
}
Signature · 1 line
Sakari Ailus
PATCH v2 2/6 media: pxa_camera: Drop the v4l2-clk clock register
In reply to Ezequiel GarciaNow that mach-based PXA platforms are registering proper fixed-rate clocks through the CCF, the v4l2-clk clock is no longer required.
Drop this clock, so the driver no longer depends on the legacy v4l2-clk API.
--- drivers/media/platform/pxa_camera.c | 30 +---------------------------- 1 file changed, 1 insertion(+), 29 deletions(-)
drivers/media/platform/pxa_camera.c +1 -29
@@ -31,7 +31,6 @@#include <linux/dma/pxa-dma.h> #include <media/v4l2-async.h> -#include <media/v4l2-clk.h> #include <media/v4l2-common.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h>
@@ -677,7 +676,6 @@ struct pxa_camera_dev {unsigned long ciclk;unsigned long mclk;u32 mclk_divisor; -struct v4l2_clk *mclk_clk;u16 width_flags;/* max 10 bits */ struct list_head capture;
@@ -2030,9 +2028,6 @@ static const struct v4l2_ioctl_ops pxa_camera_ioctl_ops = { .vidioc_unsubscribe_event = v4l2_event_unsubscribe, }; -static const struct v4l2_clk_ops pxa_camera_mclk_ops = { -}; -static const struct video_device pxa_camera_videodev_template = { .name ="pxa-camera" , .minor =-1 ,
@@ -2140,11 +2135,6 @@ static void pxa_camera_sensor_unbind(struct v4l2_async_notifier *notifier,pxa_camera_destroy_formats (pcdev); -if (pcdev->mclk_clk) { -v4l2_clk_unregister (pcdev->mclk_clk); - pcdev->mclk_clk =NULL ; - } -video_unregister_device (&pcdev->vdev); pcdev->sensor =NULL ;
@@ -2278,7 +2268,6 @@ static int pxa_camera_probe(struct platform_device *pdev) .src_maxburst = 8, .direction = DMA_DEV_TO_MEM, }; -char clk_name[V4L2_CLK_NAME_SIZE ];int irq;int err =0 , i;
@@ -2417,23 +2406,11 @@ static int pxa_camera_probe(struct platform_device *pdev)if (err) goto exit_notifier_cleanup; -v4l2_clk_name_i2c (clk_name,sizeof (clk_name), - pcdev->asd.match.i2c.adapter_id, - pcdev->asd.match.i2c.address); - - pcdev->mclk_clk =v4l2_clk_register (&pxa_camera_mclk_ops, clk_name,NULL ); -if (IS_ERR (pcdev->mclk_clk)) { - err =PTR_ERR (pcdev->mclk_clk); - goto exit_notifier_cleanup; - } - err =v4l2_async_notifier_register (&pcdev->v4l2_dev, &pcdev->notifier);if (err) - goto exit_free_clk; + goto exit_notifier_cleanup;return 0 ; -exit_free_clk: -v4l2_clk_unregister (pcdev->mclk_clk); exit_notifier_cleanup:v4l2_async_notifier_cleanup (&pcdev->notifier); exit_free_v4l2dev:
@@ -2463,11 +2440,6 @@ static int pxa_camera_remove(struct platform_device *pdev)v4l2_async_notifier_unregister (&pcdev->notifier);v4l2_async_notifier_cleanup (&pcdev->notifier); -if (pcdev->mclk_clk) { -v4l2_clk_unregister (pcdev->mclk_clk); - pcdev->mclk_clk =NULL ; - } -v4l2_device_unregister (&pcdev->v4l2_dev);dev_info (&pdev->dev,"PXA Camera driver unloaded\n" );
Signature · 1 line
2.29.2
Re: [PATCH v2 2/6] media: pxa_camera: Drop the v4l2-clk clock register
Dne 12. 01. 21 v 20:49 Ezequiel Garcia napsal(a):
Quoted 100 lines
Now that mach-based PXA platforms are registering proper fixed-rate clocks through the CCF, the v4l2-clk clock is no longer required.
Drop this clock, so the driver no longer depends on the legacy v4l2-clk API.
Signed-off-by Ezequiel Garcia <[email protected]>--- drivers/media/platform/pxa_camera.c | 30 +---------------------------- 1 file changed, 1 insertion(+), 29 deletions(-)drivers/media/platform/pxa_camera.c +1
-29@@ -31,7 +31,6 @@#include <linux/dma/pxa-dma.h> #include <media/v4l2-async.h> -#include <media/v4l2-clk.h> #include <media/v4l2-common.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h> @@ -677,7 +676,6 @@ struct pxa_camera_dev {unsigned long ciclk;unsigned long mclk;u32 mclk_divisor; -struct v4l2_clk *mclk_clk;u16 width_flags;/* max 10 bits */ struct list_head capture;@@ -2030,9 +2028,6 @@ static const struct v4l2_ioctl_ops pxa_camera_ioctl_ops = { .vidioc_unsubscribe_event = v4l2_event_unsubscribe, }; -static const struct v4l2_clk_ops pxa_camera_mclk_ops = { -}; -static const struct video_device pxa_camera_videodev_template = { .name ="pxa-camera" , .minor =-1 ,@@ -2140,11 +2135,6 @@ static void pxa_camera_sensor_unbind(struct v4l2_async_notifier *notifier,pxa_camera_destroy_formats (pcdev); -if (pcdev->mclk_clk) { -v4l2_clk_unregister (pcdev->mclk_clk); - pcdev->mclk_clk =NULL ; - } -video_unregister_device (&pcdev->vdev); pcdev->sensor =NULL ;@@ -2278,7 +2268,6 @@ static int pxa_camera_probe(struct platform_device *pdev) .src_maxburst = 8, .direction = DMA_DEV_TO_MEM, }; -char clk_name[V4L2_CLK_NAME_SIZE ];int irq;int err =0 , i;@@ -2417,23 +2406,11 @@ static int pxa_camera_probe(struct platform_device *pdev)if (err) goto exit_notifier_cleanup; -v4l2_clk_name_i2c (clk_name,sizeof (clk_name), - pcdev->asd.match.i2c.adapter_id, - pcdev->asd.match.i2c.address); - - pcdev->mclk_clk =v4l2_clk_register (&pxa_camera_mclk_ops, clk_name,NULL ); -if (IS_ERR (pcdev->mclk_clk)) { - err =PTR_ERR (pcdev->mclk_clk); - goto exit_notifier_cleanup; - } - err =v4l2_async_notifier_register (&pcdev->v4l2_dev, &pcdev->notifier);if (err) - goto exit_free_clk; + goto exit_notifier_cleanup;return 0 ; -exit_free_clk: -v4l2_clk_unregister (pcdev->mclk_clk); exit_notifier_cleanup:v4l2_async_notifier_cleanup (&pcdev->notifier); exit_free_v4l2dev:@@ -2463,11 +2440,6 @@ static int pxa_camera_remove(struct platform_device *pdev)v4l2_async_notifier_unregister (&pcdev->notifier);v4l2_async_notifier_cleanup (&pcdev->notifier); -if (pcdev->mclk_clk) { -v4l2_clk_unregister (pcdev->mclk_clk); - pcdev->mclk_clk =NULL ; - } -v4l2_device_unregister (&pcdev->v4l2_dev);dev_info (&pdev->dev,"PXA Camera driver unloaded\n" );
Re: [PATCH v2 2/6] media: pxa_camera: Drop the v4l2-clk clock register
In reply to Ezequiel GarciaQuoted 8 lines · Ezequiel Garcia
Now that mach-based PXA platforms are registering proper fixed-rate clocks through the CCF, the v4l2-clk clock is no longer required.
Drop this clock, so the driver no longer depends on the legacy v4l2-clk API.
Signed-off-by Ezequiel Garcia <[email protected]>
There was a minor conflict with the recently merged patches. I resolved it (second last chunk) here:
<URL:https://git.linuxtv.org/sailus/media_tree.git/commit/?id=2bd3c6097aaac76c0a7846456820de1ccf48194e>
Signature · 1 line
Sakari Ailus
Re: [PATCH v2 2/6] media: pxa_camera: Drop the v4l2-clk clock register
Quoted 8 lines · Sakari Ailus
Quoted 7 lines · Ezequiel Garcia
Now that mach-based PXA platforms are registering proper fixed-rate clocks through the CCF, the v4l2-clk clock is no longer required.
Drop this clock, so the driver no longer depends on the legacy v4l2-clk API.
Quoted 7 lines
Quoted 1 line
Signed-off-by Ezequiel Garcia <[email protected]>There was a minor conflict with the recently merged patches. I resolved it (second last chunk) here:
<URL:https://git.linuxtv.org/sailus/media_tree.git/commit/?id=2bd3c6097aaac76c0a7846456820de1ccf48194e>
Looks good.
Thanks,
Ezequiel
PATCH v2 3/6 media: ov9640: Use the generic clock framework
In reply to Ezequiel GarciaCommit 63839882c597 ("media: mach-pxa: palmz72/pcm990: remove soc_camera dependencies") removed the last in-tree user of this sensor. New users
will be required to use the generic clock framework,
so it's possible to convert the driver to use it.
Convert the driver to use the CCF, and drop the legacy v4l2-clk API.
--- drivers/media/i2c/ov9640.c | 15 ++++++--------- drivers/media/i2c/ov9640.h | 2 +- 2 files changed, 7 insertions(+), 10 deletions(-)
drivers/media/i2c/ov9640.c +6 -9
@@ -17,6 +17,7 @@* Copyright (C) 2008, Guennadi Liakhovetski <[email protected]> */ +#include <linux/clk.h> #include <linux/init.h> #include <linux/module.h> #include <linux/i2c.h>
@@ -26,7 +27,6 @@#include <linux/videodev2.h> #include <media/v4l2-async.h> -#include <media/v4l2-clk.h> #include <media/v4l2-common.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h>
@@ -333,13 +333,13 @@ static int ov9640_s_power(struct v4l2_subdev *sd, int on)if (on) {gpiod_set_value (priv->gpio_power,1 );usleep_range (1000 ,2000 ); - ret =v4l2_clk_enable (priv->clk); + ret =clk_prepare_enable (priv->clk);usleep_range (1000 ,2000 );gpiod_set_value (priv->gpio_reset,0 ); }else {gpiod_set_value (priv->gpio_reset,1 );usleep_range (1000 ,2000 ); -v4l2_clk_disable (priv->clk); +clk_disable_unprepare (priv->clk);usleep_range (1000 ,2000 );gpiod_set_value (priv->gpio_power,0 ); }
@@ -719,7 +719,7 @@ static int ov9640_probe(struct i2c_client *client, priv->subdev.ctrl_handler = &priv->hdl; - priv->clk =v4l2_clk_get (&client->dev,"mclk" ); + priv->clk =devm_clk_get (&client->dev,"mclk" );if (IS_ERR (priv->clk)) { ret =PTR_ERR (priv->clk); goto ectrlinit;
@@ -727,17 +727,15 @@ static int ov9640_probe(struct i2c_client *client, ret =ov9640_video_probe (client);if (ret) - goto eprobe; + goto ectrlinit; priv->subdev.dev = &client->dev; ret =v4l2_async_register_subdev (&priv->subdev);if (ret) - goto eprobe; + goto ectrlinit;return 0 ; -eprobe: -v4l2_clk_put (priv->clk); ectrlinit:v4l2_ctrl_handler_free (&priv->hdl);
@@ -749,7 +747,6 @@ static int ov9640_remove(struct i2c_client *client)struct v4l2_subdev *sd =i2c_get_clientdata (client);struct ov9640_priv *priv =to_ov9640_sensor (sd); -v4l2_clk_put (priv->clk);v4l2_async_unregister_subdev (&priv->subdev);v4l2_ctrl_handler_free (&priv->hdl);
drivers/media/i2c/ov9640.h +1 -1
@@ -196,7 +196,7 @@ struct ov9640_reg {struct ov9640_priv {struct v4l2_subdev subdev;struct v4l2_ctrl_handler hdl; -struct v4l2_clk *clk; +struct clk *clk;struct gpio_desc *gpio_power;struct gpio_desc *gpio_reset;
Signature · 1 line
2.29.2
Re: [PATCH v2 3/6] media: ov9640: Use the generic clock framework
Dne 12. 01. 21 v 20:49 Ezequiel Garcia napsal(a):
Quoted 101 lines
Commit
63839882c597("media: mach-pxa: palmz72/pcm990: removesoc_cameradependencies") removed the last in-tree user of this sensor. New users
will be required to use the generic clock framework,
so it's possible to convert the driver to use it.Convert the driver to use the CCF, and drop the legacy v4l2-clk API.
Signed-off-by Ezequiel Garcia <[email protected]>--- drivers/media/i2c/ov9640.c | 15 ++++++--------- drivers/media/i2c/ov9640.h | 2 +- 2 files changed, 7 insertions(+), 10 deletions(-)drivers/media/i2c/ov9640.c +6
-9@@ -17,6 +17,7 @@* Copyright (C) 2008, Guennadi Liakhovetski <[email protected]> */ +#include <linux/clk.h> #include <linux/init.h> #include <linux/module.h> #include <linux/i2c.h> @@ -26,7 +27,6 @@#include <linux/videodev2.h> #include <media/v4l2-async.h> -#include <media/v4l2-clk.h> #include <media/v4l2-common.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h> @@ -333,13 +333,13 @@ static int ov9640_s_power(struct v4l2_subdev *sd, int on)if (on) {gpiod_set_value (priv->gpio_power,1 );usleep_range (1000 ,2000 ); - ret =v4l2_clk_enable (priv->clk); + ret =clk_prepare_enable (priv->clk);usleep_range (1000 ,2000 );gpiod_set_value (priv->gpio_reset,0 ); }else {gpiod_set_value (priv->gpio_reset,1 );usleep_range (1000 ,2000 ); -v4l2_clk_disable (priv->clk); +clk_disable_unprepare (priv->clk);usleep_range (1000 ,2000 );gpiod_set_value (priv->gpio_power,0 ); }@@ -719,7 +719,7 @@ static int ov9640_probe(struct i2c_client *client, priv->subdev.ctrl_handler = &priv->hdl; - priv->clk =v4l2_clk_get (&client->dev,"mclk" ); + priv->clk =devm_clk_get (&client->dev,"mclk" );if (IS_ERR (priv->clk)) { ret =PTR_ERR (priv->clk); goto ectrlinit;@@ -727,17 +727,15 @@ static int ov9640_probe(struct i2c_client *client, ret =ov9640_video_probe (client);if (ret) - goto eprobe; + goto ectrlinit; priv->subdev.dev = &client->dev; ret =v4l2_async_register_subdev (&priv->subdev);if (ret) - goto eprobe; + goto ectrlinit;return 0 ; -eprobe: -v4l2_clk_put (priv->clk); ectrlinit:v4l2_ctrl_handler_free (&priv->hdl);@@ -749,7 +747,6 @@ static int ov9640_remove(struct i2c_client *client)struct v4l2_subdev *sd =i2c_get_clientdata (client);struct ov9640_priv *priv =to_ov9640_sensor (sd); -v4l2_clk_put (priv->clk);v4l2_async_unregister_subdev (&priv->subdev);v4l2_ctrl_handler_free (&priv->hdl);drivers/media/i2c/ov9640.h +1
-1@@ -196,7 +196,7 @@ struct ov9640_reg {struct ov9640_priv {struct v4l2_subdev subdev;struct v4l2_ctrl_handler hdl; -struct v4l2_clk *clk; +struct clk *clk;struct gpio_desc *gpio_power;struct gpio_desc *gpio_reset;
PATCH v2 4/6 media: mt9m111: Use the generic clock framework
In reply to Ezequiel GarciaThis sensor driver has a proper device-tree binding, and also all its platform-data based in-tree users have been converted to use the generic clock framework.
Convert the driver to use the CCF, and drop the legacy v4l2-clk API.
--- drivers/media/i2c/mt9m111.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-)
drivers/media/i2c/mt9m111.c +7 -10
@@ -4,6 +4,7 @@* * Copyright (C) 2008, Robert Jarzmik <[email protected]> */ +#include <linux/clk.h> #include <linux/videodev2.h> #include <linux/slab.h> #include <linux/i2c.h>
@@ -16,7 +17,6 @@#include <linux/property.h> #include <media/v4l2-async.h> -#include <media/v4l2-clk.h> #include <media/v4l2-common.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h>
@@ -232,7 +232,7 @@ struct mt9m111 {struct v4l2_ctrl *gain;struct mt9m111_context *ctx;struct v4l2_rect rect;/* cropping rectangle */ -struct v4l2_clk *clk; +struct clk *clk;unsigned int width;/* output */ unsigned int height;/* sizes */ struct v4l2_fract frame_interval;
@@ -977,7 +977,7 @@ static int mt9m111_power_on(struct mt9m111 *mt9m111)struct i2c_client *client =v4l2_get_subdevdata (&mt9m111->subdev);int ret; - ret =v4l2_clk_enable (mt9m111->clk); + ret =clk_prepare_enable (mt9m111->clk);if (ret <0 )return ret;
@@ -995,7 +995,7 @@ static int mt9m111_power_on(struct mt9m111 *mt9m111)regulator_disable (mt9m111->regulator); out_clk_disable: -v4l2_clk_disable (mt9m111->clk); +clk_disable_unprepare (mt9m111->clk);dev_err (&client->dev,"Failed to resume the sensor: %d\n" , ret);
@@ -1006,7 +1006,7 @@ static void mt9m111_power_off(struct mt9m111 *mt9m111) {mt9m111_suspend (mt9m111);regulator_disable (mt9m111->regulator); -v4l2_clk_disable (mt9m111->clk); +clk_disable_unprepare (mt9m111->clk); }static int mt9m111_s_power (struct v4l2_subdev *sd,int on)
@@ -1266,7 +1266,7 @@ static int mt9m111_probe(struct i2c_client *client)return ret; } - mt9m111->clk =v4l2_clk_get (&client->dev,"mclk" ); + mt9m111->clk =devm_clk_get (&client->dev,"mclk" );if (IS_ERR (mt9m111->clk))return PTR_ERR (mt9m111->clk);
@@ -1311,7 +1311,7 @@ static int mt9m111_probe(struct i2c_client *client) mt9m111->subdev.ctrl_handler = &mt9m111->hdl;if (mt9m111->hdl.error) { ret = mt9m111->hdl.error; - goto out_clkput; +return ret; }#ifdef CONFIG_MEDIA_CONTROLLER
@@ -1354,8 +1354,6 @@ static int mt9m111_probe(struct i2c_client *client) out_hdlfree:#endif v4l2_ctrl_handler_free (&mt9m111->hdl); -out_clkput: -v4l2_clk_put (mt9m111->clk);return ret; }
@@ -1366,7 +1364,6 @@ static int mt9m111_remove(struct i2c_client *client)v4l2_async_unregister_subdev (&mt9m111->subdev);media_entity_cleanup (&mt9m111->subdev.entity); -v4l2_clk_put (mt9m111->clk);v4l2_ctrl_handler_free (&mt9m111->hdl);return 0 ;
Signature · 1 line
2.29.2
Re: [PATCH v2 4/6] media: mt9m111: Use the generic clock framework
Patch compiles
Dne 12. 01. 21 v 20:49 Ezequiel Garcia napsal(a):
Quoted 104 lines
This sensor driver has a proper device-tree binding, and also all its platform-data based in-tree users have been converted to use the generic clock framework.
Convert the driver to use the CCF, and drop the legacy v4l2-clk API.
Signed-off-by Ezequiel Garcia <[email protected]>--- drivers/media/i2c/mt9m111.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-)drivers/media/i2c/mt9m111.c +7
-10@@ -4,6 +4,7 @@* * Copyright (C) 2008, Robert Jarzmik <[email protected]> */ +#include <linux/clk.h> #include <linux/videodev2.h> #include <linux/slab.h> #include <linux/i2c.h> @@ -16,7 +17,6 @@#include <linux/property.h> #include <media/v4l2-async.h> -#include <media/v4l2-clk.h> #include <media/v4l2-common.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h> @@ -232,7 +232,7 @@ struct mt9m111 {struct v4l2_ctrl *gain;struct mt9m111_context *ctx;struct v4l2_rect rect;/* cropping rectangle */ -struct v4l2_clk *clk; +struct clk *clk;unsigned int width;/* output */ unsigned int height;/* sizes */ struct v4l2_fract frame_interval;@@ -977,7 +977,7 @@ static int mt9m111_power_on(struct mt9m111 *mt9m111)struct i2c_client *client =v4l2_get_subdevdata (&mt9m111->subdev);int ret; - ret =v4l2_clk_enable (mt9m111->clk); + ret =clk_prepare_enable (mt9m111->clk);if (ret <0 )return ret;@@ -995,7 +995,7 @@ static int mt9m111_power_on(struct mt9m111 *mt9m111)regulator_disable (mt9m111->regulator); out_clk_disable: -v4l2_clk_disable (mt9m111->clk); +clk_disable_unprepare (mt9m111->clk);dev_err (&client->dev,"Failed to resume the sensor: %d\n" , ret);@@ -1006,7 +1006,7 @@ static void mt9m111_power_off(struct mt9m111 *mt9m111) {mt9m111_suspend (mt9m111);regulator_disable (mt9m111->regulator); -v4l2_clk_disable (mt9m111->clk); +clk_disable_unprepare (mt9m111->clk); }static int mt9m111_s_power (struct v4l2_subdev *sd,int on)@@ -1266,7 +1266,7 @@ static int mt9m111_probe(struct i2c_client *client)return ret; } - mt9m111->clk =v4l2_clk_get (&client->dev,"mclk" ); + mt9m111->clk =devm_clk_get (&client->dev,"mclk" );if (IS_ERR (mt9m111->clk))return PTR_ERR (mt9m111->clk);@@ -1311,7 +1311,7 @@ static int mt9m111_probe(struct i2c_client *client) mt9m111->subdev.ctrl_handler = &mt9m111->hdl;if (mt9m111->hdl.error) { ret = mt9m111->hdl.error; - goto out_clkput; +return ret; }#ifdef CONFIG_MEDIA_CONTROLLER @@ -1354,8 +1354,6 @@ static int mt9m111_probe(struct i2c_client *client) out_hdlfree:#endif v4l2_ctrl_handler_free (&mt9m111->hdl); -out_clkput: -v4l2_clk_put (mt9m111->clk);return ret; }@@ -1366,7 +1364,6 @@ static int mt9m111_remove(struct i2c_client *client)v4l2_async_unregister_subdev (&mt9m111->subdev);media_entity_cleanup (&mt9m111->subdev.entity); -v4l2_clk_put (mt9m111->clk);v4l2_ctrl_handler_free (&mt9m111->hdl);return 0 ;
PATCH v2 5/6 media: ov6650: Use the generic clock framework
In reply to Ezequiel GarciaCommit ce548396a433 ("media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies") removed the last in-tree user of this sensor. New users
will be required to use the generic clock framework,
so it's possible to convert the driver to use it.
Convert the driver to use the CCF, and drop the legacy v4l2-clk API.
--- drivers/media/i2c/ov6650.c | 28 +++++++++++----------------- 1 file changed, 11 insertions(+), 17 deletions(-)
drivers/media/i2c/ov6650.c +11 -17
@@ -22,13 +22,13 @@*/ #include <linux/bitops.h> +#include <linux/clk.h> #include <linux/delay.h> #include <linux/i2c.h> #include <linux/slab.h> #include <linux/v4l2-mediabus.h> #include <linux/module.h> -#include <media/v4l2-clk.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h>
@@ -194,7 +194,7 @@ struct ov6650 {struct v4l2_ctrl *blue;struct v4l2_ctrl *red; }; -struct v4l2_clk *clk; +struct clk *clk;bool half_scale;/* scale down output by 2 */ struct v4l2_rect rect;/* sensor cropping window */ struct v4l2_fract tpf;/* as requested with s_frame_interval */
@@ -459,9 +459,9 @@ static int ov6650_s_power(struct v4l2_subdev *sd, int on)int ret =0 ;if (on) - ret =v4l2_clk_enable (priv->clk); + ret =clk_prepare_enable (priv->clk);else -v4l2_clk_disable (priv->clk); +clk_disable_unprepare (priv->clk);return ret; }
@@ -821,14 +821,14 @@ static int ov6650_video_probe(struct v4l2_subdev *sd)u8 pidh, pidl, midh, midl;int i, ret =0 ; - priv->clk =v4l2_clk_get (&client->dev,NULL ); + priv->clk =devm_clk_get (&client->dev,NULL );if (IS_ERR (priv->clk)) { ret =PTR_ERR (priv->clk); -dev_err (&client->dev,"v4l2_clk request err: %d\n" , ret); +dev_err (&client->dev,"clk request err: %d\n" , ret);return ret; } - rate =v4l2_clk_get_rate (priv->clk); + rate =clk_get_rate (priv->clk);for (i =0 ; rate && i <ARRAY_SIZE (ov6650_xclk); i++) {if (rate != ov6650_xclk[i].rate)continue ;
@@ -839,8 +839,8 @@ static int ov6650_video_probe(struct v4l2_subdev *sd)break ; }for (i =0 ; !xclk && i <ARRAY_SIZE (ov6650_xclk); i++) { - ret =v4l2_clk_set_rate (priv->clk, ov6650_xclk[i].rate); -if (ret ||v4l2_clk_get_rate (priv->clk) != ov6650_xclk[i].rate) + ret =clk_set_rate (priv->clk, ov6650_xclk[i].rate); +if (ret ||clk_get_rate (priv->clk) != ov6650_xclk[i].rate)continue ; xclk = &ov6650_xclk[i];
@@ -852,12 +852,12 @@ static int ov6650_video_probe(struct v4l2_subdev *sd)dev_err (&client->dev,"unable to get supported clock rate\n" );if (!ret) ret = -EINVAL ; - goto eclkput; +return ret; } ret =ov6650_s_power (sd,1 );if (ret <0 ) - goto eclkput; +return ret;msleep (20 );
@@ -899,11 +899,6 @@ static int ov6650_video_probe(struct v4l2_subdev *sd) done:ov6650_s_power (sd,0 ); -if (!ret) -return 0 ; -eclkput: -v4l2_clk_put (priv->clk); -return ret; }
@@ -1089,7 +1084,6 @@ static int ov6650_remove(struct i2c_client *client) {struct ov6650 *priv =to_ov6650 (client); -v4l2_clk_put (priv->clk);v4l2_async_unregister_subdev (&priv->subdev);v4l2_ctrl_handler_free (&priv->hdl);return 0 ;
Signature · 1 line
2.29.2
Re: [PATCH v2 5/6] media: ov6650: Use the generic clock framework
Patch compiles
Dne 12. 01. 21 v 20:49 Ezequiel Garcia napsal(a):
Quoted 119 lines
Commit
ce548396a433("media: mach-omap1:board-ams-delta.c: removesoc_cameradependencies") removed the last in-tree user of this sensor. New users
will be required to use the generic clock framework,
so it's possible to convert the driver to use it.Convert the driver to use the CCF, and drop the legacy v4l2-clk API.
Signed-off-by Ezequiel Garcia <[email protected]>Reviewed-by Janusz Krzysztofik <[email protected]>--- drivers/media/i2c/ov6650.c | 28 +++++++++++----------------- 1 file changed, 11 insertions(+), 17 deletions(-)drivers/media/i2c/ov6650.c +11
-17@@ -22,13 +22,13 @@*/ #include <linux/bitops.h> +#include <linux/clk.h> #include <linux/delay.h> #include <linux/i2c.h> #include <linux/slab.h> #include <linux/v4l2-mediabus.h> #include <linux/module.h> -#include <media/v4l2-clk.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h> @@ -194,7 +194,7 @@ struct ov6650 {struct v4l2_ctrl *blue;struct v4l2_ctrl *red; }; -struct v4l2_clk *clk; +struct clk *clk;bool half_scale;/* scale down output by 2 */ struct v4l2_rect rect;/* sensor cropping window */ struct v4l2_fract tpf;/* as requested with s_frame_interval */ @@ -459,9 +459,9 @@ static int ov6650_s_power(struct v4l2_subdev *sd, int on)int ret =0 ;if (on) - ret =v4l2_clk_enable (priv->clk); + ret =clk_prepare_enable (priv->clk);else -v4l2_clk_disable (priv->clk); +clk_disable_unprepare (priv->clk);return ret; }@@ -821,14 +821,14 @@ static int ov6650_video_probe(struct v4l2_subdev *sd)u8 pidh, pidl, midh, midl;int i, ret =0 ; - priv->clk =v4l2_clk_get (&client->dev,NULL ); + priv->clk =devm_clk_get (&client->dev,NULL );if (IS_ERR (priv->clk)) { ret =PTR_ERR (priv->clk); -dev_err (&client->dev,"v4l2_clk request err: %d\n" , ret); +dev_err (&client->dev,"clk request err: %d\n" , ret);return ret; } - rate =v4l2_clk_get_rate (priv->clk); + rate =clk_get_rate (priv->clk);for (i =0 ; rate && i <ARRAY_SIZE (ov6650_xclk); i++) {if (rate != ov6650_xclk[i].rate)continue ;@@ -839,8 +839,8 @@ static int ov6650_video_probe(struct v4l2_subdev *sd)break ; }for (i =0 ; !xclk && i <ARRAY_SIZE (ov6650_xclk); i++) { - ret =v4l2_clk_set_rate (priv->clk, ov6650_xclk[i].rate); -if (ret ||v4l2_clk_get_rate (priv->clk) != ov6650_xclk[i].rate) + ret =clk_set_rate (priv->clk, ov6650_xclk[i].rate); +if (ret ||clk_get_rate (priv->clk) != ov6650_xclk[i].rate)continue ; xclk = &ov6650_xclk[i];@@ -852,12 +852,12 @@ static int ov6650_video_probe(struct v4l2_subdev *sd)dev_err (&client->dev,"unable to get supported clock rate\n" );if (!ret) ret = -EINVAL ; - goto eclkput; +return ret; } ret =ov6650_s_power (sd,1 );if (ret <0 ) - goto eclkput; +return ret;msleep (20 );@@ -899,11 +899,6 @@ static int ov6650_video_probe(struct v4l2_subdev *sd) done:ov6650_s_power (sd,0 ); -if (!ret) -return 0 ; -eclkput: -v4l2_clk_put (priv->clk); -return ret; }@@ -1089,7 +1084,6 @@ static int ov6650_remove(struct i2c_client *client) {struct ov6650 *priv =to_ov6650 (client); -v4l2_clk_put (priv->clk);v4l2_async_unregister_subdev (&priv->subdev);v4l2_ctrl_handler_free (&priv->hdl);return 0 ;
PATCH v2 6/6 media: Remove the legacy v4l2-clk API
In reply to Ezequiel GarciaThe V4L2 temporary clock helper API, was introduced in late 2012 and, as mentioned in the documentation, meant to be replaced by the generic clock API, once the generic clock framework became available on all relevant architectures.
The generic clock API is a well-established API (since a few years now). The last few media capture drivers and sensors using v4l2-clk have been converted to the generic clock framework.
We can now remove the v4l2-clk API.
--- .../driver-api/media/v4l2-clocks.rst | 31 -- Documentation/driver-api/media/v4l2-core.rst | 1 - drivers/media/v4l2-core/Makefile | 2 +- drivers/media/v4l2-core/v4l2-clk.c | 321 ------------------ include/media/v4l2-clk.h | 73 ---- 5 files changed, 1 insertion(+), 427 deletions(-) delete mode 100644 Documentation/driver-api/media/v4l2-clocks.rst delete mode 100644 drivers/media/v4l2-core/v4l2-clk.c delete mode 100644 include/media/v4l2-clk.h
Documentation/driver-api/media/v4l2-clocks.rst deleted +0 -31
@@ -1,31 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -V4L2 clocks ------------ - -.. attention:: - - This is a temporary API and it shall be replaced by the generic - clock API, when the latter becomes widely available. - -Many subdevices, like camera sensors, TV decoders and encoders, need a clock -signal to be supplied by the system. Often this clock is supplied by the -respective bridge device. The Linux kernel provides a Common Clock Framework for -this purpose. However, it is not (yet) available on all architectures. Besides, -the nature of the multi-functional (clock, data + synchronisation, I2C control) -connection of subdevices to the system might impose special requirements on the -clock API usage. E.g. V4L2 has to support clock provider driver unregistration -while a subdevice driver is holding a reference to the clock. For these reasons -a V4L2 clock helper API has been developed and is provided to bridge and -subdevice drivers. - -The API consists of two parts: two functions to register and unregister a V4L2 -clock source: v4l2_clk_register() and v4l2_clk_unregister() and calls to control -a clock object, similar to the respective generic clock API calls: -v4l2_clk_get(), v4l2_clk_put(), v4l2_clk_enable(), v4l2_clk_disable(), -v4l2_clk_get_rate(), and v4l2_clk_set_rate(). Clock suppliers have to provide -clock operations that will be called when clock users invoke respective API -methods. - -It is expected that once the CCF becomes available on all relevant -architectures this API will be removed.
Documentation/driver-api/media/v4l2-core.rst +0 -1
@@ -15,7 +15,6 @@ Video4Linux devices v4l2-controls v4l2-videobuf v4l2-videobuf2 - v4l2-clocks v4l2-dv-timings v4l2-flash-led-class v4l2-mc
drivers/media/v4l2-core/Makefile +1 -1
@@ -6,7 +6,7 @@ tuner-objs := tuner-core.o videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o v4l2-fh.o \ - v4l2-event.o v4l2-ctrls.o v4l2-subdev.o v4l2-clk.o \ + v4l2-event.o v4l2-ctrls.o v4l2-subdev.o \ v4l2-async.o v4l2-common.o videodev-$(CONFIG_COMPAT) += v4l2-compat-ioctl32.o videodev-$(CONFIG_TRACEPOINTS) += v4l2-trace.o
drivers/media/v4l2-core/v4l2-clk.c deleted +0 -321
321 lines not on this page · raw message
include/media/v4l2-clk.h deleted +0 -73
73 lines not on this page · raw message
Signature · 1 line
2.29.2
Re: [PATCH v2 6/6] media: Remove the legacy v4l2-clk API
Dne 12. 01. 21 v 20:49 Ezequiel Garcia napsal(a):
Quoted 493 lines
The V4L2 temporary clock helper API, was introduced in late 2012 and, as mentioned in the documentation, meant to be replaced by the generic clock API, once the generic clock framework became available on all relevant architectures.
The generic clock API is a well-established API (since a few years now). The last few media capture drivers and sensors using v4l2-clk have been converted to the generic clock framework.
We can now remove the v4l2-clk API.
Signed-off-by Ezequiel Garcia <[email protected]>--- .../driver-api/media/v4l2-clocks.rst | 31 -- Documentation/driver-api/media/v4l2-core.rst | 1 - drivers/media/v4l2-core/Makefile | 2 +- drivers/media/v4l2-core/v4l2-clk.c | 321 ------------------ include/media/v4l2-clk.h | 73 ---- 5 files changed, 1 insertion(+), 427 deletions(-) delete mode 100644 Documentation/driver-api/media/v4l2-clocks.rst delete mode 100644 drivers/media/v4l2-core/v4l2-clk.c delete mode 100644 include/media/v4l2-clk.hDocumentation/driver-api/media/v4l2-clocks.rst deleted +0
-31@@ -1,31 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -V4L2 clocks ------------ - -.. attention:: - - This is a temporary API and it shall be replaced by the generic - clock API, when the latter becomes widely available. - -Many subdevices, like camera sensors, TV decoders and encoders, need a clock -signal to be supplied by the system. Often this clock is supplied by the -respective bridge device. The Linux kernel provides a Common Clock Framework for -this purpose. However, it is not (yet) available on all architectures. Besides, -the nature of the multi-functional (clock, data + synchronisation, I2C control) -connection of subdevices to the system might impose special requirements on the -clock API usage. E.g. V4L2 has to support clock provider driver unregistration -while a subdevice driver is holding a reference to the clock. For these reasons -a V4L2 clock helper API has been developed and is provided to bridge and -subdevice drivers. - -The API consists of two parts: two functions to register and unregister a V4L2 -clock source: v4l2_clk_register() and v4l2_clk_unregister() and calls to control -a clock object, similar to the respective generic clock API calls: -v4l2_clk_get(), v4l2_clk_put(), v4l2_clk_enable(), v4l2_clk_disable(), -v4l2_clk_get_rate(), and v4l2_clk_set_rate(). Clock suppliers have to provide -clock operations that will be called when clock users invoke respective API -methods. - -It is expected that once the CCF becomes available on all relevant -architectures this API will be removed.Documentation/driver-api/media/v4l2-core.rst +0
-1@@ -15,7 +15,6 @@ Video4Linux devices v4l2-controls v4l2-videobuf v4l2-videobuf2 - v4l2-clocks v4l2-dv-timings v4l2-flash-led-class v4l2-mcdrivers/media/v4l2-core/Makefile +1
-1@@ -6,7 +6,7 @@ tuner-objs := tuner-core.o videodev-objs := v4l2-dev.o v4l2-ioctl.o v4l2-device.o v4l2-fh.o \ - v4l2-event.o v4l2-ctrls.o v4l2-subdev.o v4l2-clk.o \ + v4l2-event.o v4l2-ctrls.o v4l2-subdev.o \ v4l2-async.o v4l2-common.o videodev-$(CONFIG_COMPAT) += v4l2-compat-ioctl32.o videodev-$(CONFIG_TRACEPOINTS) += v4l2-trace.odrivers/media/v4l2-core/v4l2-clk.c deleted +0
-321@@ -1,321 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* -* V4L2 clock service -* -* Copyright (C) 2012-2013, Guennadi Liakhovetski <[email protected]> -*/ - -#include <linux/atomic.h> -#include <linux/clk.h> -#include <linux/device.h> -#include <linux/errno.h> -#include <linux/list.h> -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/of.h> -#include <linux/slab.h> -#include <linux/string.h> - -#include <media/v4l2-clk.h> -#include <media/v4l2-subdev.h> - -static DEFINE_MUTEX (clk_lock); -static LIST_HEAD (clk_list); - -static struct v4l2_clk *v4l2_clk_find (const char *dev_id) -{ -struct v4l2_clk *clk; - -list_for_each_entry (clk, &clk_list, list) -if (!strcmp (dev_id, clk->dev_id)) -return clk; - -return ERR_PTR (-ENODEV ); -} - -struct v4l2_clk *v4l2_clk_get (struct device *dev,const char *id) -{ -struct v4l2_clk *clk; -struct clk *ccf_clk =clk_get (dev, id); -char clk_name[V4L2_CLK_NAME_SIZE ]; - -if (PTR_ERR (ccf_clk) == -EPROBE_DEFER ) -return ERR_PTR (-EPROBE_DEFER ); - -if (!IS_ERR_OR_NULL (ccf_clk)) { - clk =kzalloc (sizeof (*clk),GFP_KERNEL ); -if (!clk) { -clk_put (ccf_clk); -return ERR_PTR (-ENOMEM ); - } - clk->clk = ccf_clk; - -return clk; - } - -mutex_lock (&clk_lock); - clk =v4l2_clk_find (dev_name (dev)); - -/* if dev_name is not found, try use the OF name to find again */ -if (PTR_ERR (clk) == -ENODEV && dev->of_node) { -v4l2_clk_name_of (clk_name,sizeof (clk_name), dev->of_node); - clk =v4l2_clk_find (clk_name); - } - -if (!IS_ERR (clk)) -atomic_inc (&clk->use_count); -mutex_unlock (&clk_lock); - -return clk; -} -EXPORT_SYMBOL (v4l2_clk_get); - -void v4l2_clk_put (struct v4l2_clk *clk) -{ -struct v4l2_clk *tmp; - -if (IS_ERR (clk)) -return ; - -if (clk->clk) { -clk_put (clk->clk); -kfree (clk); -return ; - } - -mutex_lock (&clk_lock); - -list_for_each_entry (tmp, &clk_list, list) -if (tmp == clk) -atomic_dec (&clk->use_count); - -mutex_unlock (&clk_lock); -} -EXPORT_SYMBOL (v4l2_clk_put); - -static int v4l2_clk_lock_driver (struct v4l2_clk *clk) -{ -struct v4l2_clk *tmp; -int ret = -ENODEV ; - -mutex_lock (&clk_lock); - -list_for_each_entry (tmp, &clk_list, list) -if (tmp == clk) { - ret = !try_module_get (clk->ops->owner); -if (ret) - ret = -EFAULT ; -break ; - } - -mutex_unlock (&clk_lock); - -return ret; -} - -static void v4l2_clk_unlock_driver (struct v4l2_clk *clk) -{ -module_put (clk->ops->owner); -} - -int v4l2_clk_enable (struct v4l2_clk *clk) -{ -int ret; - -if (clk->clk) -return clk_prepare_enable (clk->clk); - - ret =v4l2_clk_lock_driver (clk); -if (ret <0 ) -return ret; - -mutex_lock (&clk->lock); - -if (++clk->enable ==1 && clk->ops->enable) { - ret = clk->ops->enable (clk); -if (ret <0 ) - clk->enable--; - } - -mutex_unlock (&clk->lock); - -return ret; -} -EXPORT_SYMBOL (v4l2_clk_enable); - -/* -* You might Oops if you try to disabled a disabled clock, because then the -* driver isn't locked and could have been unloaded by now, so, don't do that -*/ -void v4l2_clk_disable (struct v4l2_clk *clk) -{ -int enable; - -if (clk->clk) -return clk_disable_unprepare (clk->clk); - -mutex_lock (&clk->lock); - - enable = --clk->enable; -if (WARN (enable <0 ,"Unbalanced %s() on %s!\n" , __func__, - clk->dev_id)) - clk->enable++; -else if (!enable && clk->ops->disable) - clk->ops->disable (clk); - -mutex_unlock (&clk->lock); - -v4l2_clk_unlock_driver (clk); -} -EXPORT_SYMBOL (v4l2_clk_disable); - -unsigned long v4l2_clk_get_rate (struct v4l2_clk *clk) -{ -int ret; - -if (clk->clk) -return clk_get_rate (clk->clk); - - ret =v4l2_clk_lock_driver (clk); -if (ret <0 ) -return ret; - -mutex_lock (&clk->lock); -if (!clk->ops->get_rate) - ret = -ENOSYS ; -else - ret = clk->ops->get_rate (clk); -mutex_unlock (&clk->lock); - -v4l2_clk_unlock_driver (clk); - -return ret; -} -EXPORT_SYMBOL (v4l2_clk_get_rate); - -int v4l2_clk_set_rate (struct v4l2_clk *clk,unsigned long rate) -{ -int ret; - -if (clk->clk) { -long r =clk_round_rate (clk->clk, rate); -if (r <0 ) -return r; -return clk_set_rate (clk->clk, r); - } - - ret =v4l2_clk_lock_driver (clk); - -if (ret <0 ) -return ret; - -mutex_lock (&clk->lock); -if (!clk->ops->set_rate) - ret = -ENOSYS ; -else - ret = clk->ops->set_rate (clk, rate); -mutex_unlock (&clk->lock); - -v4l2_clk_unlock_driver (clk); - -return ret; -} -EXPORT_SYMBOL (v4l2_clk_set_rate); - -struct v4l2_clk *v4l2_clk_register (const struct v4l2_clk_ops *ops, -const char *dev_id, -void *priv) -{ -struct v4l2_clk *clk; -int ret; - -if (!ops || !dev_id) -return ERR_PTR (-EINVAL ); - - clk =kzalloc (sizeof (struct v4l2_clk ),GFP_KERNEL ); -if (!clk) -return ERR_PTR (-ENOMEM ); - - clk->dev_id =kstrdup (dev_id,GFP_KERNEL ); -if (!clk->dev_id) { - ret = -ENOMEM ; - goto ealloc; - } - clk->ops = ops; - clk->priv = priv; -atomic_set (&clk->use_count,0 ); -mutex_init (&clk->lock); - -mutex_lock (&clk_lock); -if (!IS_ERR (v4l2_clk_find (dev_id))) { -mutex_unlock (&clk_lock); - ret = -EEXIST ; - goto eexist; - } -list_add_tail (&clk->list, &clk_list); -mutex_unlock (&clk_lock); - -return clk; - -eexist: -ealloc: -kfree (clk->dev_id); -kfree (clk); -return ERR_PTR (ret); -} -EXPORT_SYMBOL (v4l2_clk_register); - -void v4l2_clk_unregister (struct v4l2_clk *clk) -{ -if (WARN (atomic_read (&clk->use_count), -"%s(): Refusing to unregister ref-counted %s clock!\n" , - __func__, clk->dev_id)) -return ; - -mutex_lock (&clk_lock); -list_del (&clk->list); -mutex_unlock (&clk_lock); - -kfree (clk->dev_id); -kfree (clk); -} -EXPORT_SYMBOL (v4l2_clk_unregister); - -struct v4l2_clk_fixed { -unsigned long rate; -struct v4l2_clk_ops ops; -}; - -static unsigned long fixed_get_rate (struct v4l2_clk *clk) -{ -struct v4l2_clk_fixed *priv = clk->priv; -return priv->rate; -} - -struct v4l2_clk *__v4l2_clk_register_fixed (const char *dev_id, -unsigned long rate,struct module *owner) -{ -struct v4l2_clk *clk; -struct v4l2_clk_fixed *priv =kzalloc (sizeof (*priv),GFP_KERNEL ); - -if (!priv) -return ERR_PTR (-ENOMEM ); - - priv->rate = rate; - priv->ops.get_rate = fixed_get_rate; - priv->ops.owner = owner; - - clk =v4l2_clk_register (&priv->ops, dev_id, priv); -if (IS_ERR (clk)) -kfree (priv); - -return clk; -} -EXPORT_SYMBOL (__v4l2_clk_register_fixed); - -void v4l2_clk_unregister_fixed (struct v4l2_clk *clk) -{ -kfree (clk->priv); -v4l2_clk_unregister (clk); -} -EXPORT_SYMBOL (v4l2_clk_unregister_fixed);include/media/v4l2-clk.h deleted +0
-73@@ -1,73 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* -* V4L2 clock service -* -* Copyright (C) 2012-2013, Guennadi Liakhovetski <[email protected]> -* -* ATTENTION: This is a temporary API and it shall be replaced by the generic -* clock API, when the latter becomes widely available. -*/ - -#ifndef MEDIA_V4L2_CLK_H -#define MEDIA_V4L2_CLK_H - -#include <linux/atomic.h> -#include <linux/export.h> -#include <linux/list.h> -#include <linux/mutex.h> - -struct module ; -struct device ; - -struct clk ; -struct v4l2_clk { -struct list_head list; -const struct v4l2_clk_ops *ops; -const char *dev_id; -int enable; -struct mutex lock;/* Protect the enable count */ -atomic_t use_count; -struct clk *clk; -void *priv; -}; - -struct v4l2_clk_ops { -struct module *owner; -int (*enable)(struct v4l2_clk *clk); -void (*disable)(struct v4l2_clk *clk); -unsigned long (*get_rate)(struct v4l2_clk *clk); -int (*set_rate)(struct v4l2_clk *clk,unsigned long ); -}; - -struct v4l2_clk *v4l2_clk_register (const struct v4l2_clk_ops *ops, -const char *dev_name, -void *priv); -void v4l2_clk_unregister (struct v4l2_clk *clk); -struct v4l2_clk *v4l2_clk_get (struct device *dev,const char *id); -void v4l2_clk_put (struct v4l2_clk *clk); -int v4l2_clk_enable (struct v4l2_clk *clk); -void v4l2_clk_disable (struct v4l2_clk *clk); -unsigned long v4l2_clk_get_rate (struct v4l2_clk *clk); -int v4l2_clk_set_rate (struct v4l2_clk *clk,unsigned long rate); - -struct module ; - -struct v4l2_clk *__v4l2_clk_register_fixed (const char *dev_id, -unsigned long rate,struct module *owner); -void v4l2_clk_unregister_fixed (struct v4l2_clk *clk); - -static inline struct v4l2_clk *v4l2_clk_register_fixed (const char *dev_id, -unsigned long rate) -{ -return __v4l2_clk_register_fixed (dev_id, rate,THIS_MODULE ); -} - -#define V4L2_CLK_NAME_SIZE 64 - -#define v4l2_clk_name_i2c (name, size, adap, client) snprintf(name, size, \ - "%d-%04x", adap, client) - -#define v4l2_clk_name_of (name, size, node) snprintf(name, size, \ - "of-%pOF", node) - -#endif