mlx5: add ConnectX-7 and Bluefield-3 device IDs
Subsystems (3)
PATCH 1/1 mlx5: add ConnectX-7 and Bluefield-3 device IDs
This adds the ConnectX-7 and Bluefield-3 device ids to the list of supported Mellanox devices that run the MLX5 PMDs.
The devices is still in development stage.
--- drivers/common/mlx5/mlx5_common.h | 2 ++ drivers/net/mlx5/mlx5.c | 8 ++++++++ drivers/regex/mlx5/mlx5_regex.c | 4 ++++ drivers/vdpa/mlx5/mlx5_vdpa.c | 8 ++++++++ 4 files changed, 22 insertions(+)
drivers/common/mlx5/mlx5_common.h +2 -0
@@ -132,6 +132,8 @@ enum {PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF =0x101e ,PCI_DEVICE_ID_MELLANOX_CONNECTX6DXBF =0xa2d6 ,PCI_DEVICE_ID_MELLANOX_CONNECTX6LX =0x101f , +PCI_DEVICE_ID_MELLANOX_CONNECTX7 =0x1021 , + PCI_DEVICE_ID_MELLANOX_CONNECTX7BF = 0Xa2dc, };/* Maximum number of simultaneous unicast MAC addresses. */
drivers/net/mlx5/mlx5.c +8 -0
@@ -2122,6 +2122,14 @@ static const struct rte_pci_id mlx5_pci_id_map[] = {RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX ,PCI_DEVICE_ID_MELLANOX_CONNECTX6LX ) }, + { +RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX , +PCI_DEVICE_ID_MELLANOX_CONNECTX7 ) + }, + { +RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX , +PCI_DEVICE_ID_MELLANOX_CONNECTX7BF ) + }, { .vendor_id = 0 }
drivers/regex/mlx5/mlx5_regex.c +4 -0
@@ -254,6 +254,10 @@ static const struct rte_pci_id mlx5_regex_pci_id_map[] = {RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX ,PCI_DEVICE_ID_MELLANOX_CONNECTX6DXBF ) }, + { +RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX , +PCI_DEVICE_ID_MELLANOX_CONNECTX7BF ) + }, { .vendor_id = 0 }
drivers/vdpa/mlx5/mlx5_vdpa.c +8 -0
@@ -825,6 +825,14 @@ static const struct rte_pci_id mlx5_vdpa_pci_id_map[] = {RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX ,PCI_DEVICE_ID_MELLANOX_CONNECTX6DXBF ) }, + { +RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX , +PCI_DEVICE_ID_MELLANOX_CONNECTX7 ) + }, + { +RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX , +PCI_DEVICE_ID_MELLANOX_CONNECTX7BF ) + }, { .vendor_id = 0 }
Signature · 1 line
2.17.1
Quoted 8 lines
-----Original Message-----
From: Raslan Darawsheh <[email protected]>
Sent: Monday, October 26, 2020 13:42
To: [email protected]
Cc: Matan Azrad <[email protected]>; Slava Ovsiienko <[email protected]>; Shy Shyman <[email protected]>
Subject: [PATCH] mlx5: add ConnectX-7 and Bluefield-3 device IDs
Quoted 6 lines
This adds the ConnectX-7 and Bluefield-3 device ids to the list of supported Mellanox devices that run the MLX5 PMDs.
The devices is still in development stage.Signed-off-by Raslan Darawsheh <[email protected]>---
Hi,
Quoted 96 lines
-----Original Message-----
From: dev <[email protected]> On Behalf Of Raslan Darawsheh
Sent: Monday, October 26, 2020 1:42 PM
To: [email protected]
Cc: Matan Azrad <[email protected]>; Slava Ovsiienko <[email protected]>; Shy Shyman <[email protected]>
Subject: [dpdk-dev] [PATCH] mlx5: add ConnectX-7 and Bluefield-3 device IDsThis adds the ConnectX-7 and Bluefield-3 device ids to the list of supported Mellanox devices that run the MLX5 PMDs.
The devices is still in development stage.Signed-off-by Raslan Darawsheh <[email protected]>--- drivers/common/mlx5/mlx5_common.h | 2 ++ drivers/net/mlx5/mlx5.c | 8 ++++++++ drivers/regex/mlx5/mlx5_regex.c | 4 ++++ drivers/vdpa/mlx5/mlx5_vdpa.c | 8 ++++++++ 4 files changed, 22 insertions(+)drivers/common/mlx5/mlx5_common.h +2
-0@@ -132,6 +132,8 @@ enum {PCI_DEVICE_ID_MELLANOX_CONNECTX6DXVF =0x101e ,PCI_DEVICE_ID_MELLANOX_CONNECTX6DXBF =0xa2d6 ,PCI_DEVICE_ID_MELLANOX_CONNECTX6LX =0x101f , +PCI_DEVICE_ID_MELLANOX_CONNECTX7 =0x1021 , + PCI_DEVICE_ID_MELLANOX_CONNECTX7BF = 0Xa2dc, };/* Maximum number of simultaneous unicast MAC addresses. */ drivers/net/mlx5/mlx5.c +8
-0@@ -2122,6 +2122,14 @@ static const struct rte_pci_id mlx5_pci_id_map[] = {RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX ,PCI_DEVICE_ID_MELLANOX_CONNECTX6LX ) }, + { +RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX , +PCI_DEVICE_ID_MELLANOX_CONNECTX7 ) + }, + { +RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX , +PCI_DEVICE_ID_MELLANOX_CONNECTX7BF ) + }, { .vendor_id =0 drivers/net/mlx5/mlx5.c +0
-0}drivers/regex/mlx5/mlx5_regex.c +4
-0@@ -254,6 +254,10 @@ static const struct rte_pci_id mlx5_regex_pci_id_map[] = {RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX ,PCI_DEVICE_ID_MELLANOX_CONNECTX6DXBF ) }, + { +RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX , +PCI_DEVICE_ID_MELLANOX_CONNECTX7BF ) + }, {drivers/regex/mlx5/mlx5_regex.c +0
-0.vendor_id = 0 }drivers/vdpa/mlx5/mlx5_vdpa.c +8
-0@@ -825,6 +825,14 @@ static const struct rte_pci_id mlx5_vdpa_pci_id_map[] = {RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX ,PCI_DEVICE_ID_MELLANOX_CONNECTX6DXBF ) }, + { +RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX , +PCI_DEVICE_ID_MELLANOX_CONNECTX7 ) + }, + { +RTE_PCI_DEVICE (PCI_VENDOR_ID_MELLANOX , +PCI_DEVICE_ID_MELLANOX_CONNECTX7BF ) + }, {drivers/vdpa/mlx5/mlx5_vdpa.c +0
-1.vendor_id = 0 } --
Quoted 1 line
2.17.1
Patch applied to next-net-mlx,
Kindest regards,
Raslan Darawsheh
Quoted 4 lines · Raslan Darawsheh
This adds the ConnectX-7 and Bluefield-3 device ids to the list of supported Mellanox devices that run the MLX5 PMDs.
The devices is still in development stage.
I assume you don't want to add these new device support to the documentation or to the web page, but what do you think adding it to the driver documentation with this device under development note, or experimental support etc?
Quoted 1 line
Signed-off-by Raslan Darawsheh <[email protected]>
<...>
Hi Ferruh,
Quoted 15 lines
-----Original Message-----
From: Ferruh Yigit <[email protected]>
Sent: Thursday, October 29, 2020 5:26 PM
To: Raslan Darawsheh <[email protected]>; [email protected]
Cc: Matan Azrad <[email protected]>; Slava Ovsiienko <[email protected]>; Shy Shyman <[email protected]>
Subject: Re: [dpdk-dev] [PATCH] mlx5: add ConnectX-7 and Bluefield-3 device IDsQuoted 4 lines · Raslan Darawsheh
This adds the ConnectX-7 and Bluefield-3 device ids to the list of supported Mellanox devices that run the MLX5 PMDs.
The devices is still in development stage.
Quoted 6 lines
I assume you don't want to add these new device support to the documentation or
to the web page, but what do you think adding it to the driver documentation
with this device under development note, or experimental support etc?
It's about that we haven't tried the PMD with these NIC's yet, so announcing that it has support for them without knowing that we don't really have any issues (even 0 level issue) I don't think its OK to add such documentation.
I think once we'll have the proper testing done for them, we can add them to all necessary documentations
Quoted 3 lines
Quoted 1 line
Signed-off-by Raslan Darawsheh <[email protected]><...>
Kindest regards,
Raslan Darawsheh
Quoted 23 lines · Raslan Darawsheh
Hi Ferruh,
Quoted 15 lines
-----Original Message-----
From: Ferruh Yigit <[email protected]>
Sent: Thursday, October 29, 2020 5:26 PM
To: Raslan Darawsheh <[email protected]>; [email protected]
Cc: Matan Azrad <[email protected]>; Slava Ovsiienko <[email protected]>; Shy Shyman <[email protected]>
Subject: Re: [dpdk-dev] [PATCH] mlx5: add ConnectX-7 and Bluefield-3 device IDsQuoted 4 lines · Raslan Darawsheh
This adds the ConnectX-7 and Bluefield-3 device ids to the list of supported Mellanox devices that run the MLX5 PMDs.
The devices is still in development stage.Quoted 6 lines
I assume you don't want to add these new device support to the documentation or
to the web page, but what do you think adding it to the driver documentation
with this device under development note, or experimental support etc?
Quoted 5 lines
It's about that we haven't tried the PMD with these NIC's yet, so announcing that it has support for them without knowing that we don't really have any issues (even 0 level issue) I don't think its OK to add such documentation.
I think once we'll have the proper testing done for them, we can add them to all necessary documentations
OK