Skip to contentSkip to conversation

toolchain: remove binutils bug 21464

PATCH Applied Giulio Benetti 6 participants 23 messages May 21, 2021 – Dec 30, 2021

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 toolchain: remove binutils bug 21464

This bug has been fixed upstream and backported to buildroot binutils package. So let's remove it from toolchain/Config.in and from packages that are affected by it:
- libgeos
- postgis
- protobuf

---
V1->V2:
* squashed 4 different patches into one

---
 package/libgeos/Config.in  | 4 +---
 package/postgis/Config.in  | 4 +---
 package/protobuf/Config.in | 1 -
 toolchain/Config.in        | 6 ------
 4 files changed, 2 insertions(+), 13 deletions(-)
package/libgeos/Config.in +1 -3
index 86a1cddcf3..124e2da661 100644
@@ -2,7 +2,6 @@ config BR2_PACKAGE_LIBGEOS
 	bool "libgeos"
 	depends on BR2_INSTALL_LIBSTDCPP
 	depends on BR2_USE_WCHAR
-	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464
 	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
 	help
 	  GEOS (Geometry Engine - Open Source) is a C++ port of the
@@ -13,7 +12,6 @@ config BR2_PACKAGE_LIBGEOS
 
 	  https://trac.osgeo.org/geos
 
-comment "libgeos needs a toolchain w/ C++, wchar, not binutils bug 21464, 27597"
+comment "libgeos needs a toolchain w/ C++, wchar, not binutils bug 27597"
 	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
-		   BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464 || \
 		   BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
package/postgis/Config.in +1 -3
index 04705f7e16..78c52ea7b2 100644
@@ -6,7 +6,6 @@ config BR2_PACKAGE_POSTGIS
 	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 # C++11, proj
 	depends on BR2_TOOLCHAIN_HAS_THREADS # proj
 	depends on BR2_USE_WCHAR # libgeos, proj
-	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464 # libgeos
 	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597 # libgeos
 	select BR2_PACKAGE_LIBGEOS
 	select BR2_PACKAGE_PROJ
@@ -20,9 +19,8 @@ config BR2_PACKAGE_POSTGIS
 
 	  https://postgis.net/
 
-comment "postgis needs a toolchain w/ C++, threads, wchar, gcc >= 4.7, not binutils bug 21464, 27597"
+comment "postgis needs a toolchain w/ C++, threads, wchar, gcc >= 4.7, not binutils bug 27597"
 	depends on !BR2_microblazeel && !BR2_microblazebe # ICE
 	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 || \
 		!BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR || \
-		BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464 || \
 		BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
package/protobuf/Config.in +0 -1
index 30050950aa..46c820b9cf 100644
@@ -24,7 +24,6 @@ config BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS
 	default y if BR2_TOOLCHAIN_HAS_ATOMIC
 	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
 	depends on BR2_USE_MMU # fork()
-	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464
 
 config BR2_PACKAGE_PROTOBUF
 	bool "protobuf"
toolchain/Config.in +0 -6
index 78444f6130..06c338ee7d 100644
@@ -71,12 +71,6 @@ source "package/gdb/Config.in.host"
 
 comment "Toolchain Generic Options"
 
-# https://sourceware.org/bugzilla/show_bug.cgi?id=21464
-# Affect toolchains built with binutils 2.31.1, still not fixed.
-config BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464
-	bool
-	default y if BR2_or1k
-
 # https://sourceware.org/bugzilla/show_bug.cgi?id=27100
 # Affect toolchains built with binutils 2.33.1 (fixed in binutils 2.36)
 config BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27100
Signature · 1 line
2.25.1
#1 lore raw

PATCH v2 1/1 toolchain: remove binutils bug 21464

Quoted 11 lines · Giulio Benetti

This bug has been fixed upstream and backported to buildroot binutils package. So let's remove it from toolchain/Config.in and from packages that are affected by it:
- libgeos
- postgis
- protobuf

---
V1->V2:
* squashed 4 different patches into one

Quoted 6 lines
---
  package/libgeos/Config.in  | 4 +---
  package/postgis/Config.in  | 4 +---
  package/protobuf/Config.in | 1 -
  toolchain/Config.in        | 6 ------
  4 files changed, 2 insertions(+), 13 deletions(-)
#2 lore raw
In reply to Giulio Benetti
Quoted 11 lines · On Fri, 21 May 2021 16:09:42 +0200 Giulio Benetti…

This bug has been fixed upstream and backported to buildroot binutils package. So let's remove it from toolchain/Config.in and from packages that are affected by it:
- libgeos
- postgis
- protobuf

---
V1->V2:
* squashed 4 different patches into one

Quoted 6 lines
---
 package/libgeos/Config.in  | 4 +---
 package/postgis/Config.in  | 4 +---
 package/protobuf/Config.in | 1 -
 toolchain/Config.in        | 6 ------
 4 files changed, 2 insertions(+), 13 deletions(-)

Applied to master, thanks.

Thomas

Signature · 7 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot
#3 lore raw
In reply to Giulio Benetti
Quoted 11 lines · On Fri, 21 May 2021 16:09:42 +0200 Giulio Benetti…

This bug has been fixed upstream and backported to buildroot binutils package. So let's remove it from toolchain/Config.in and from packages that are affected by it:
- libgeos
- postgis
- protobuf

---
V1->V2:
* squashed 4 different patches into one

Quoted 6 lines
---
 package/libgeos/Config.in  | 4 +---
 package/postgis/Config.in  | 4 +---
 package/protobuf/Config.in | 1 -
 toolchain/Config.in        | 6 ------
 4 files changed, 2 insertions(+), 13 deletions(-)

In fact, no I reverted this patch. It depends on other patches to be applied first. This is an illustration of why you should *never* ever resend just a single patch out of a larger series. Even if only one patch is changed, please resend the entire series.

Could you update your "Fix binutils bug 21464 and remove it" series and resend it?

Thanks,

Thomas

Signature · 7 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot
#4 lore raw
Quoted 24 lines

Il giorno 26 lug 2021, alle ore 23:57, Thomas Petazzoni <[email protected]> ha scritto:

On Fri, 21 May 2021 16:09:42 +0200

Quoted 12 lines · Giulio Benetti

This bug has been fixed upstream and backported to buildroot binutils package. So let's remove it from toolchain/Config.in and from packages that are affected by it:
- libgeos
- postgis
- protobuf

---
V1->V2:
* squashed 4 different patches into one
---

Quoted 5 lines
package/libgeos/Config.in  | 4 +---
package/postgis/Config.in  | 4 +---
package/protobuf/Config.in | 1 -
toolchain/Config.in        | 6 ------
4 files changed, 2 insertions(+), 13 deletions(-)
Quoted 4 lines

In fact, no I reverted this patch. It depends on other patches to be applied first. This is an illustration of why you should *never* ever resend just a single patch out of a larger series. Even if only one patch is changed, please resend the entire series.

Oh, I see the reason, sorry.

Quoted 3 lines

Could you update your "Fix binutils bug 21464 and remove it" series and resend it?

Sure I will.

Best regards
Giulio Benetti

Quoted 8 lines

Thanks,

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot

#5 lore raw

v2 cover Fix binutils bug 21464 and remove it

In reply to Thomas Petazzoni

This patchset fixes binutils bug 21464 and fixes libgeos and protobuf packages build failure by introducing the gcc option flag -mcmodel. This is done by adding upstreamed binutils and gcc patches.

Note:
this way buildroot toolchains can be considered bug binutils 21464 free and the only other OpenRisc toolchain supported is the external Bootlin one. So this patchset has to be considered valid once Bootlin updates its OpenRisc by adding binutils and gcc patches that are added with patches in this patchset.

V1->V2:
* squashed patches [6..9/9] into one resulting into "toolchain: remove binutils bug 21464" where binutils bug gets removed all around buildroot. Note that this patch has been sent as v2 alone but it shouldn't have been since was part of this patchset and before it the other 2 patches which add -mcmodel=large to libgeos and protobuf must be applied.

Giulio Benetti (3):
package/libgeos: fix build failure due to missing -mcmodel=large package/protobuf: fix build failure due to missing -mcmodel=large
toolchain: remove binutils bug 21464

 package/libgeos/Config.in    | 4 +---
 package/libgeos/libgeos.mk   | 4 ++++
 package/postgis/Config.in    | 4 +---
 package/protobuf/Config.in   | 1 -
 package/protobuf/protobuf.mk | 4 ++++
 toolchain/Config.in          | 6 ------
 6 files changed, 10 insertions(+), 13 deletions(-)
Signature · 6 lines
2.25.1

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot
#6 lore raw

PATCH v2 1/3 package/libgeos: fix build failure due to missing -mcmodel=large

When building libgeos for or1k -mcmodel=large is needed to link, so let's add that gcc option in case we're building for or1k.

---
 package/libgeos/libgeos.mk | 4 ++++
 1 file changed, 4 insertions(+)
package/libgeos/libgeos.mk +4 -0
index a355732af8..43211d0434 100644
@@ -23,6 +23,10 @@ ifeq ($(BR2_arm)$(BR2_armeb),y)
 LIBGEOS_CONF_OPTS += -DDISABLE_GEOS_INLINE=ON
 endif
 
+ifeq ($(BR2_or1k),y)
+LIBGEOS_CXXFLAGS += -mcmodel=large
+endif
+
 LIBGEOS_CONF_OPTS += -DCMAKE_CXX_FLAGS="$(LIBGEOS_CXXFLAGS)"
 
 $(eval $(cmake-package))
Signature · 6 lines
2.25.1

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot
Reviewed-by Maxim Kochetkov on v2 1/3
#7 lore raw

Re: [Buildroot] [PATCH v2 1/3] package/libgeos: fix build failure due to missing -mcmodel=large

Quoted 14 lines · Giulio Benetti

When building libgeos for or1k -mcmodel=large is needed to link, so let's add that gcc option in case we're building for or1k.

---
  package/libgeos/libgeos.mk | 4 ++++
  1 file changed, 4 insertions(+)
package/libgeos/libgeos.mk +0 -0
index a355732af8..43211d0434 100644

package/libgeos/libgeos.mk ifeq ($(BR2_arm)$(BR2_armeb),y) · line 32

Quoted 10 lines
package/libgeos/libgeos.mk +4 -0
@@ -23,6 +23,10 @@ ifeq ($(BR2_arm)$(BR2_armeb),y)
  LIBGEOS_CONF_OPTS += -DDISABLE_GEOS_INLINE=ON
  endif
 
+ifeq ($(BR2_or1k),y)
+LIBGEOS_CXXFLAGS += -mcmodel=large
+endif
+
  LIBGEOS_CONF_OPTS += -DCMAKE_CXX_FLAGS="$(LIBGEOS_CXXFLAGS)"
 
  $(eval $(cmake-package))

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot

#8 lore raw

Re: [Buildroot] [PATCH v2 1/3] package/libgeos: fix build failure due to missing -mcmodel=large

In reply to Giulio Benetti
Quoted 13 lines · Giulio Benetti

When building libgeos for or1k -mcmodel=large is needed to link, so let's add that gcc option in case we're building for or1k.

---
 package/libgeos/libgeos.mk | 4 ++++
 1 file changed, 4 insertions(+)
package/libgeos/libgeos.mk +0 -0
index a355732af8..43211d0434 100644

package/libgeos/libgeos.mk ifeq ($(BR2_arm)$(BR2_armeb),y) · line 27

Quoted 5 lines
package/libgeos/libgeos.mk +2 -0
@@ -23,6 +23,10 @@ ifeq ($(BR2_arm)$(BR2_armeb),y)
 LIBGEOS_CONF_OPTS += -DDISABLE_GEOS_INLINE=ON
 endif
 
+ifeq ($(BR2_or1k),y)
+LIBGEOS_CXXFLAGS += -mcmodel=large

According to git, -mcmodel was added to GCC after the 11.2.0 release. Are you
sure that this works?

Oooh, we have a patch that adds it. But that patch is missing for 11.1.0 for
some reason. Romain, you apparently didn't carry any of our patches when you added GCC 11 in 2ab88dac293aed5adf2504e8b182f9d8a306b935. The commit message doesn't say anything. Do you remember anything about the patches? The patch was added to master on May 21 and you only submitted the GCC bump on June 12, but perhaps you already had it lying around for a while?

Giulio, maybe you can port the patch to 11.1.0?

Regards,
Arnout

package/libgeos/libgeos.mk ifeq ($(BR2_arm)$(BR2_armeb),y) · line 32

Quoted 6 lines
package/libgeos/libgeos.mk +2 -0
+endif
+
 LIBGEOS_CONF_OPTS += -DCMAKE_CXX_FLAGS="$(LIBGEOS_CXXFLAGS)"
 
 $(eval $(cmake-package))

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot

#9 lore raw

Re: [Buildroot] [PATCH v2 1/3] package/libgeos: fix build failure due to missing -mcmodel=large

Hi Arnout,

Quoted 25 lines · Arnout Vandecappelle
Quoted 13 lines · Giulio Benetti

When building libgeos for or1k -mcmodel=large is needed to link, so let's add that gcc option in case we're building for or1k.

---
  package/libgeos/libgeos.mk | 4 ++++
  1 file changed, 4 insertions(+)
package/libgeos/libgeos.mk +0 -0
index a355732af8..43211d0434 100644

package/libgeos/libgeos.mk ifeq ($(BR2_arm)$(BR2_armeb),y) · line 27

Quoted 5 lines
package/libgeos/libgeos.mk +2 -0
@@ -23,6 +23,10 @@ ifeq ($(BR2_arm)$(BR2_armeb),y)
  LIBGEOS_CONF_OPTS += -DDISABLE_GEOS_INLINE=ON
  endif
 
+ifeq ($(BR2_or1k),y)
+LIBGEOS_CXXFLAGS += -mcmodel=large

According to git, -mcmodel was added to GCC after the 11.2.0 release. Are you
sure that this works?

Quoted 8 lines

Oooh, we have a patch that adds it. But that patch is missing for 11.1.0 for
some reason. Romain, you apparently didn't carry any of our patches when you added GCC 11 in 2ab88dac293aed5adf2504e8b182f9d8a306b935. The commit message doesn't say anything. Do you remember anything about the patches? The patch was added to master on May 21 and you only submitted the GCC bump on June 12, but perhaps you already had it lying around for a while?

Giulio, maybe you can port the patch to 11.1.0?

You've read into my mind :-), I've sent it yesterday:
https://patchwork.ozlabs.org/project/buildroot/list/?series=258108

and that is valid for both libgeos and profobuf.

Best regards!

Signature · 2 lines
Giulio Benetti
Benetti Engineering sas
Quoted 7 lines

Regards,
Arnout

Quoted 4 lines
package/libgeos/libgeos.mk +2 -0
+endif
+
  LIBGEOS_CONF_OPTS += -DCMAKE_CXX_FLAGS="$(LIBGEOS_CXXFLAGS)"
 
Quoted 7 lines

package/libgeos/libgeos.mk ifeq ($(BR2_arm)$(BR2_armeb),y) · line 32

Quoted 2 lines
package/libgeos/libgeos.mk +0 -0
  $(eval $(cmake-package))

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot

#10 lore raw

Re: [Buildroot] [PATCH v2 1/3] package/libgeos: fix build failure due to missing -mcmodel=large

In reply to Arnout Vandecappelle
Quoted 25 lines · Arnout Vandecappelle
Quoted 13 lines · Giulio Benetti

When building libgeos for or1k -mcmodel=large is needed to link, so let's add that gcc option in case we're building for or1k.

---
 package/libgeos/libgeos.mk | 4 ++++
 1 file changed, 4 insertions(+)
package/libgeos/libgeos.mk +0 -0
index a355732af8..43211d0434 100644

package/libgeos/libgeos.mk ifeq ($(BR2_arm)$(BR2_armeb),y) · line 27

Quoted 5 lines
package/libgeos/libgeos.mk +2 -0
@@ -23,6 +23,10 @@ ifeq ($(BR2_arm)$(BR2_armeb),y)
 LIBGEOS_CONF_OPTS += -DDISABLE_GEOS_INLINE=ON
 endif
 
+ifeq ($(BR2_or1k),y)
+LIBGEOS_CXXFLAGS += -mcmodel=large

According to git, -mcmodel was added to GCC after the 11.2.0 release. Are you
sure that this works?

Quoted 8 lines

Oooh, we have a patch that adds it. But that patch is missing for 11.1.0 for
some reason. Romain, you apparently didn't carry any of our patches when you added GCC 11 in 2ab88dac293aed5adf2504e8b182f9d8a306b935. The commit message doesn't say anything. Do you remember anything about the patches? The patch was added to master on May 21 and you only submitted the GCC bump on June 12, but perhaps you already had it lying around for a while?

Giulio, maybe you can port the patch to 11.1.0?

... and now I see you already did that in [1]. Thanks!

Regards,
Arnout

[1]
https://patchwork.ozlabs.org/project/buildroot/patch/[email protected]/

Quoted 10 lines

Regards,
Arnout

package/libgeos/libgeos.mk ifeq ($(BR2_arm)$(BR2_armeb),y) · line 32

Quoted 6 lines
package/libgeos/libgeos.mk +2 -0
+endif
+
 LIBGEOS_CONF_OPTS += -DCMAKE_CXX_FLAGS="$(LIBGEOS_CXXFLAGS)"
 
 $(eval $(cmake-package))

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot

#11 lore raw

Re: [Buildroot] [PATCH v2 1/3] package/libgeos: fix build failure due to missing -mcmodel=large

In reply to Arnout Vandecappelle

Hello Arnout,

Le 17/08/2021 à 22:34, Arnout Vandecappelle a écrit :

Quoted 25 lines · Giulio Benetti
Quoted 13 lines

When building libgeos for or1k -mcmodel=large is needed to link, so let's add that gcc option in case we're building for or1k.

---
 package/libgeos/libgeos.mk | 4 ++++
 1 file changed, 4 insertions(+)
package/libgeos/libgeos.mk +0 -0
index a355732af8..43211d0434 100644

package/libgeos/libgeos.mk ifeq ($(BR2_arm)$(BR2_armeb),y) · line 27

Quoted 5 lines
package/libgeos/libgeos.mk +2 -0
@@ -23,6 +23,10 @@ ifeq ($(BR2_arm)$(BR2_armeb),y)
 LIBGEOS_CONF_OPTS += -DDISABLE_GEOS_INLINE=ON
 endif
 
+ifeq ($(BR2_or1k),y)
+LIBGEOS_CXXFLAGS += -mcmodel=large

According to git, -mcmodel was added to GCC after the 11.2.0 release. Are you
sure that this works?

Quoted 6 lines

Oooh, we have a patch that adds it. But that patch is missing for 11.1.0 for
some reason. Romain, you apparently didn't carry any of our patches when you added GCC 11 in 2ab88dac293aed5adf2504e8b182f9d8a306b935. The commit message doesn't say anything. Do you remember anything about the patches? The patch was added to master on May 21 and you only submitted the GCC bump on June 12, but perhaps you already had it lying around for a while?

Indeed, I missed this patch.

Quoted 2 lines

Giulio, maybe you can port the patch to 11.1.0?

Yes please.

Best regards,
Romain

Quoted 10 lines

Regards,
Arnout

package/libgeos/libgeos.mk ifeq ($(BR2_arm)$(BR2_armeb),y) · line 32

Quoted 6 lines
package/libgeos/libgeos.mk +2 -0
+endif
+
 LIBGEOS_CONF_OPTS += -DCMAKE_CXX_FLAGS="$(LIBGEOS_CXXFLAGS)"
 
 $(eval $(cmake-package))

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot

#12 lore raw

Re: [Buildroot] [PATCH v2 1/3] package/libgeos: fix build failure due to missing -mcmodel=large

Hi Romain,

Quoted 35 lines · Romain Naour

Hello Arnout,

Le 17/08/2021 à 22:34, Arnout Vandecappelle a écrit :

Quoted 25 lines · Giulio Benetti
Quoted 13 lines

When building libgeos for or1k -mcmodel=large is needed to link, so let's add that gcc option in case we're building for or1k.

---
  package/libgeos/libgeos.mk | 4 ++++
  1 file changed, 4 insertions(+)
package/libgeos/libgeos.mk +0 -0
index a355732af8..43211d0434 100644

package/libgeos/libgeos.mk ifeq ($(BR2_arm)$(BR2_armeb),y) · line 27

Quoted 5 lines
package/libgeos/libgeos.mk +2 -0
@@ -23,6 +23,10 @@ ifeq ($(BR2_arm)$(BR2_armeb),y)
  LIBGEOS_CONF_OPTS += -DDISABLE_GEOS_INLINE=ON
  endif
 
+ifeq ($(BR2_or1k),y)
+LIBGEOS_CXXFLAGS += -mcmodel=large

According to git, -mcmodel was added to GCC after the 11.2.0 release. Are you
sure that this works?

Quoted 6 lines

Oooh, we have a patch that adds it. But that patch is missing for 11.1.0 for
some reason. Romain, you apparently didn't carry any of our patches when you added GCC 11 in 2ab88dac293aed5adf2504e8b182f9d8a306b935. The commit message doesn't say anything. Do you remember anything about the patches? The patch was added to master on May 21 and you only submitted the GCC bump on June 12, but perhaps you already had it lying around for a while?

Quoted 6 lines

Indeed, I missed this patch.

Quoted 2 lines

Giulio, maybe you can port the patch to 11.1.0?

Yes please.

Already sent and applied here :-):
https://git.buildroot.net/buildroot/commit/?id=137225cef423ccbebc31d0c562bf3f37192739ac

I'm going to add myself to toolchain as maintainer too, so I keep up to date on toolchain movement and also I've added a bunch of binutils/gcc bugs. So it's time for it :-)

Best regards

Signature · 2 lines
Giulio Benetti
Benetti Engineering sas
Quoted 12 lines

Best regards,
Romain

Quoted 8 lines

Regards,
Arnout

Quoted 4 lines
package/libgeos/libgeos.mk +2 -0
+endif
+
  LIBGEOS_CONF_OPTS += -DCMAKE_CXX_FLAGS="$(LIBGEOS_CXXFLAGS)"
 
Quoted 8 lines
Quoted 2 lines

package/libgeos/libgeos.mk ifeq ($(BR2_arm)$(BR2_armeb),y) · line 32

Quoted 2 lines
package/libgeos/libgeos.mk +0 -0
  $(eval $(cmake-package))

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot

#13 lore raw

Re: [Buildroot] [PATCH v2 1/3] package/libgeos: fix build failure due to missing -mcmodel=large

In reply to Giulio Benetti
Quoted 4 lines · Giulio Benetti

When building libgeos for or1k -mcmodel=large is needed to link, so let's add that gcc option in case we're building for or1k.

Applied to master, thanks.

I've added a comment to the commit message to explain that this option is from
a Buildroot patch.

I've also applied the second patch with the same comment.

Regards,
Arnout

Quoted 10 lines
---
 package/libgeos/libgeos.mk | 4 ++++
 1 file changed, 4 insertions(+)
package/libgeos/libgeos.mk +0 -0
index a355732af8..43211d0434 100644

package/libgeos/libgeos.mk ifeq ($(BR2_arm)$(BR2_armeb),y) · line 32

Quoted 10 lines
package/libgeos/libgeos.mk +4 -0
@@ -23,6 +23,10 @@ ifeq ($(BR2_arm)$(BR2_armeb),y)
 LIBGEOS_CONF_OPTS += -DDISABLE_GEOS_INLINE=ON
 endif
 
+ifeq ($(BR2_or1k),y)
+LIBGEOS_CXXFLAGS += -mcmodel=large
+endif
+
 LIBGEOS_CONF_OPTS += -DCMAKE_CXX_FLAGS="$(LIBGEOS_CXXFLAGS)"
 
 $(eval $(cmake-package))

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot

#14 lore raw

PATCH v2 2/3 package/protobuf: fix build failure due to missing -mcmodel=large

In reply to Giulio Benetti

When building protobuf for or1k -mcmodel=large is needed to link, so let's add that gcc option in case we're building for or1k.

---
 package/protobuf/protobuf.mk | 4 ++++
 1 file changed, 4 insertions(+)
package/protobuf/protobuf.mk +4 -0
index 492917c5e8..75791fade2 100644
@@ -24,6 +24,10 @@ ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_85180),y)
 PROTOBUF_CXXFLAGS += -O0
 endif
 
+ifeq ($(BR2_or1k),y)
+PROTOBUF_CXXFLAGS += -mcmodel=large
+endif
+
 PROTOBUF_CONF_ENV = CXXFLAGS="$(PROTOBUF_CXXFLAGS)"
 
 ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y)
Signature · 6 lines
2.25.1

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot
Reviewed-by on v2 2/3
#15 lore raw

Re: [Buildroot] [PATCH v2 2/3] package/protobuf: fix build failure due to missing -mcmodel=large

Quoted 14 lines · Giulio Benetti

When building protobuf for or1k -mcmodel=large is needed to link, so let's add that gcc option in case we're building for or1k.

---
  package/protobuf/protobuf.mk | 4 ++++
  1 file changed, 4 insertions(+)
package/protobuf/protobuf.mk +0 -0
index 492917c5e8..75791fade2 100644

package/protobuf/protobuf.mk ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_85180),y) · line 33

Quoted 10 lines
package/protobuf/protobuf.mk +4 -0
@@ -24,6 +24,10 @@ ifeq ($(BR2_TOOLCHAIN_HAS_GCC_BUG_85180),y)
  PROTOBUF_CXXFLAGS += -O0
  endif
 
+ifeq ($(BR2_or1k),y)
+PROTOBUF_CXXFLAGS += -mcmodel=large
+endif
+
  PROTOBUF_CONF_ENV = CXXFLAGS="$(PROTOBUF_CXXFLAGS)"
 
  ifeq ($(BR2_TOOLCHAIN_HAS_LIBATOMIC),y)

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot

#16 lore raw

PATCH v2 3/3 toolchain: remove binutils bug 21464

In reply to Giulio Benetti

This bug has been fixed upstream and backported to buildroot binutils package. So let's remove it from toolchain/Config.in and from packages that are affected by it:
- libgeos
- postgis
- protobuf

---
 package/libgeos/Config.in  | 4 +---
 package/postgis/Config.in  | 4 +---
 package/protobuf/Config.in | 1 -
 toolchain/Config.in        | 6 ------
 4 files changed, 2 insertions(+), 13 deletions(-)
package/libgeos/Config.in +1 -3
index 86a1cddcf3..124e2da661 100644
@@ -2,7 +2,6 @@ config BR2_PACKAGE_LIBGEOS
 	bool "libgeos"
 	depends on BR2_INSTALL_LIBSTDCPP
 	depends on BR2_USE_WCHAR
-	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464
 	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
 	help
 	  GEOS (Geometry Engine - Open Source) is a C++ port of the
@@ -13,7 +12,6 @@ config BR2_PACKAGE_LIBGEOS
 
 	  https://trac.osgeo.org/geos
 
-comment "libgeos needs a toolchain w/ C++, wchar, not binutils bug 21464, 27597"
+comment "libgeos needs a toolchain w/ C++, wchar, not binutils bug 27597"
 	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
-		   BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464 || \
 		   BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
package/postgis/Config.in +1 -3
index 04705f7e16..78c52ea7b2 100644
@@ -6,7 +6,6 @@ config BR2_PACKAGE_POSTGIS
 	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 # C++11, proj
 	depends on BR2_TOOLCHAIN_HAS_THREADS # proj
 	depends on BR2_USE_WCHAR # libgeos, proj
-	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464 # libgeos
 	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597 # libgeos
 	select BR2_PACKAGE_LIBGEOS
 	select BR2_PACKAGE_PROJ
@@ -20,9 +19,8 @@ config BR2_PACKAGE_POSTGIS
 
 	  https://postgis.net/
 
-comment "postgis needs a toolchain w/ C++, threads, wchar, gcc >= 4.7, not binutils bug 21464, 27597"
+comment "postgis needs a toolchain w/ C++, threads, wchar, gcc >= 4.7, not binutils bug 27597"
 	depends on !BR2_microblazeel && !BR2_microblazebe # ICE
 	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 || \
 		!BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR || \
-		BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464 || \
 		BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
package/protobuf/Config.in +0 -1
index 30050950aa..46c820b9cf 100644
@@ -24,7 +24,6 @@ config BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS
 	default y if BR2_TOOLCHAIN_HAS_ATOMIC
 	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
 	depends on BR2_USE_MMU # fork()
-	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464
 
 config BR2_PACKAGE_PROTOBUF
 	bool "protobuf"
toolchain/Config.in +0 -6
index 8603e2aaff..3598307b20 100644
@@ -71,12 +71,6 @@ source "package/gdb/Config.in.host"
 
 comment "Toolchain Generic Options"
 
-# https://sourceware.org/bugzilla/show_bug.cgi?id=21464
-# Affect toolchains built with binutils 2.31.1, still not fixed.
-config BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464
-	bool
-	default y if BR2_or1k
-
 # https://sourceware.org/bugzilla/show_bug.cgi?id=27597
 # Affect toolchains built with binutils 2.36.1, still not fixed.
 config BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
Signature · 6 lines
2.25.1

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot
#17 lore raw
Quoted 6 lines · Giulio Benetti

This bug has been fixed upstream and backported to buildroot binutils package. So let's remove it from toolchain/Config.in and from packages that are affected by it:
- libgeos
- postgis
- protobuf

It's not clear to me if all the external toolchains that we use also have this
patch already. Basically that boils down to the stable and bleeding edge bootlin toolchains.

Well, I'm pretty sure they're not yet updated, since they're still 2020.08-1...

Regards,
Arnout

Quoted 74 lines
---
 package/libgeos/Config.in  | 4 +---
 package/postgis/Config.in  | 4 +---
 package/protobuf/Config.in | 1 -
 toolchain/Config.in        | 6 ------
 4 files changed, 2 insertions(+), 13 deletions(-)
package/libgeos/Config.in +1 -3
index 86a1cddcf3..124e2da661 100644
@@ -2,7 +2,6 @@ config BR2_PACKAGE_LIBGEOS
 	bool "libgeos"
 	depends on BR2_INSTALL_LIBSTDCPP
 	depends on BR2_USE_WCHAR
-	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464
 	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
 	help
 	  GEOS (Geometry Engine - Open Source) is a C++ port of the
@@ -13,7 +12,6 @@ config BR2_PACKAGE_LIBGEOS
 
 	  https://trac.osgeo.org/geos
 
-comment "libgeos needs a toolchain w/ C++, wchar, not binutils bug 21464, 27597"
+comment "libgeos needs a toolchain w/ C++, wchar, not binutils bug 27597"
 	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
-		   BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464 || \
 		   BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
package/postgis/Config.in +1 -3
index 04705f7e16..78c52ea7b2 100644
@@ -6,7 +6,6 @@ config BR2_PACKAGE_POSTGIS
 	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 # C++11, proj
 	depends on BR2_TOOLCHAIN_HAS_THREADS # proj
 	depends on BR2_USE_WCHAR # libgeos, proj
-	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464 # libgeos
 	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597 # libgeos
 	select BR2_PACKAGE_LIBGEOS
 	select BR2_PACKAGE_PROJ
@@ -20,9 +19,8 @@ config BR2_PACKAGE_POSTGIS
 
 	  https://postgis.net/
 
-comment "postgis needs a toolchain w/ C++, threads, wchar, gcc >= 4.7, not binutils bug 21464, 27597"
+comment "postgis needs a toolchain w/ C++, threads, wchar, gcc >= 4.7, not binutils bug 27597"
 	depends on !BR2_microblazeel && !BR2_microblazebe # ICE
 	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 || \
 		!BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR || \
-		BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464 || \
 		BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
package/protobuf/Config.in +0 -1
index 30050950aa..46c820b9cf 100644
@@ -24,7 +24,6 @@ config BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS
 	default y if BR2_TOOLCHAIN_HAS_ATOMIC
 	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
 	depends on BR2_USE_MMU # fork()
-	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464
 
 config BR2_PACKAGE_PROTOBUF
 	bool "protobuf"
toolchain/Config.in +0 -0
index 8603e2aaff..3598307b20 100644
@@ -71,12 +71,6 @@ source "package/gdb/Config.in.host"
 
 comment "Toolchain Generic Options"

toolchain/Config.in source "package/gdb/Config.in.host" · line 76

Quoted 10 lines
toolchain/Config.in +0 -6
 
-# https://sourceware.org/bugzilla/show_bug.cgi?id=21464
-# Affect toolchains built with binutils 2.31.1, still not fixed.
-config BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464
-	bool
-	default y if BR2_or1k
-
 # https://sourceware.org/bugzilla/show_bug.cgi?id=27597
 # Affect toolchains built with binutils 2.36.1, still not fixed.
 config BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot

#18 lore raw

Hi Arnout,

Quoted 10 lines · Arnout Vandecappelle
Quoted 6 lines · Giulio Benetti

This bug has been fixed upstream and backported to buildroot binutils package. So let's remove it from toolchain/Config.in and from packages that are affected by it:
- libgeos
- postgis
- protobuf

Quoted 5 lines

It's not clear to me if all the external toolchains that we use also have this
patch already. Basically that boils down to the stable and bleeding edge bootlin toolchains.

Well, I'm pretty sure they're not yet updated, since they're still 2020.08-1...

For this patch we have to wait until all or1k patches have been applied to Bootlin toolchain and they got rebuilt and bumped. Then we can apply it since Buildroot will become OpenRisc bug free. But this depends on external OpenRisc toolchains that only Bootlin provide

Kind regards

Signature · 2 lines
Giulio Benetti
Benetti Engineering sas
Quoted 78 lines

Regards,
Arnout

Quoted 74 lines
---
  package/libgeos/Config.in  | 4 +---
  package/postgis/Config.in  | 4 +---
  package/protobuf/Config.in | 1 -
  toolchain/Config.in        | 6 ------
  4 files changed, 2 insertions(+), 13 deletions(-)
package/libgeos/Config.in +1 -3
index 86a1cddcf3..124e2da661 100644
@@ -2,7 +2,6 @@ config BR2_PACKAGE_LIBGEOS
  	bool "libgeos"
  	depends on BR2_INSTALL_LIBSTDCPP
  	depends on BR2_USE_WCHAR
-	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464
  	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
  	help
  	  GEOS (Geometry Engine - Open Source) is a C++ port of the
@@ -13,7 +12,6 @@ config BR2_PACKAGE_LIBGEOS
 
  	  https://trac.osgeo.org/geos
 
-comment "libgeos needs a toolchain w/ C++, wchar, not binutils bug 21464, 27597"
+comment "libgeos needs a toolchain w/ C++, wchar, not binutils bug 27597"
  	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_USE_WCHAR || \
-		   BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464 || \
  		   BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
package/postgis/Config.in +1 -3
index 04705f7e16..78c52ea7b2 100644
@@ -6,7 +6,6 @@ config BR2_PACKAGE_POSTGIS
  	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 # C++11, proj
  	depends on BR2_TOOLCHAIN_HAS_THREADS # proj
  	depends on BR2_USE_WCHAR # libgeos, proj
-	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464 # libgeos
  	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597 # libgeos
  	select BR2_PACKAGE_LIBGEOS
  	select BR2_PACKAGE_PROJ
@@ -20,9 +19,8 @@ config BR2_PACKAGE_POSTGIS
 
  	  https://postgis.net/
 
-comment "postgis needs a toolchain w/ C++, threads, wchar, gcc >= 4.7, not binutils bug 21464, 27597"
+comment "postgis needs a toolchain w/ C++, threads, wchar, gcc >= 4.7, not binutils bug 27597"
  	depends on !BR2_microblazeel && !BR2_microblazebe # ICE
  	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_GCC_AT_LEAST_4_7 || \
  		!BR2_TOOLCHAIN_HAS_THREADS || !BR2_USE_WCHAR || \
-		BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464 || \
  		BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597
package/protobuf/Config.in +0 -1
index 30050950aa..46c820b9cf 100644
@@ -24,7 +24,6 @@ config BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS
  	default y if BR2_TOOLCHAIN_HAS_ATOMIC
  	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
  	depends on BR2_USE_MMU # fork()
-	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464
 
  config BR2_PACKAGE_PROTOBUF
  	bool "protobuf"
toolchain/Config.in +0 -0
index 8603e2aaff..3598307b20 100644
@@ -71,12 +71,6 @@ source "package/gdb/Config.in.host"
 
  comment "Toolchain Generic Options"
 
Quoted 10 lines

toolchain/Config.in source "package/gdb/Config.in.host" · line 76

Quoted 10 lines
toolchain/Config.in +0 -6
-# https://sourceware.org/bugzilla/show_bug.cgi?id=21464
-# Affect toolchains built with binutils 2.31.1, still not fixed.
-config BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464
-	bool
-	default y if BR2_or1k
-
  # https://sourceware.org/bugzilla/show_bug.cgi?id=27597
  # Affect toolchains built with binutils 2.36.1, still not fixed.
  config BR2_TOOLCHAIN_HAS_BINUTILS_BUG_27597

_______________________________________________
buildroot mailing list
[email protected]
http://lists.busybox.net/mailman/listinfo/buildroot

#19 lore raw

Hi Arnout, Thomas, All,

Quoted 17 lines · Giulio Benetti

Hi Arnout,

Quoted 14 lines · Arnout Vandecappelle
Quoted 6 lines · Giulio Benetti

This bug has been fixed upstream and backported to buildroot binutils package. So let's remove it from toolchain/Config.in and from packages that are affected by it:
- libgeos
- postgis
- protobuf

It's not clear to me if all the external toolchains that we use also have this
patch already. Basically that boils down to the stable and bleeding edge bootlin toolchains.

Quoted 6 lines
Quoted 1 line

Well, I'm pretty sure they're not yet updated, since they're still 2020.08-1...

For this patch we have to wait until all or1k patches have been applied to Bootlin toolchain and they got rebuilt and bumped.
Then we can apply it since Buildroot will become OpenRisc bug free. But this depends on external OpenRisc toolchains that only Bootlin provide

Unfortunately libgeos is still affected by this bug and postgis too because it's its dependency. The reason is that libgeos has been bumped and I've never given a build after that.

Only protobuf has been fixed after rebuilding all Bootlin toolchains.
So I will report upstream that is usually very responsive and ask to fix this binutils again, hopefully once for all.

So please drop this patch. I'll send a patch for protobuf package only.

Best regards

Signature · 6 lines
Giulio Benetti
Benetti Engineering sas
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#20 lore raw

PATCH 1/1 package/protobuf: drop dependency on binutils bug 21464

This package build failure has been fixed by using -mcmodel=large that is now available in external toolchains as well as buildroot toolchains. So we can drop its dependency on binutils 21464.

---
 package/protobuf/Config.in | 1 -
 1 file changed, 1 deletion(-)
package/protobuf/Config.in +0 -1
index 30050950aa..46c820b9cf 100644
@@ -24,7 +24,6 @@ config BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS
 	default y if BR2_TOOLCHAIN_HAS_ATOMIC
 	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
 	depends on BR2_USE_MMU # fork()
-	depends on !BR2_TOOLCHAIN_HAS_BINUTILS_BUG_21464
 
 config BR2_PACKAGE_PROTOBUF
 	bool "protobuf"
Signature · 6 lines
2.25.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#21 lore raw

Re: [Buildroot] [PATCH] package/protobuf: drop dependency on binutils bug 21464

Quoted 8 lines · On Thu, 30 Dec 2021 21:12:30 +0100 Giulio Benetti…

This package build failure has been fixed by using -mcmodel=large that is now available in external toolchains as well as buildroot toolchains. So we can drop its dependency on binutils 21464.

---
 package/protobuf/Config.in | 1 -
 1 file changed, 1 deletion(-)

Applied to master, thanks.

Thomas

Signature · 7 lines
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
#22 lore raw
In reply to Giulio Benetti
Quoted 27 lines · Giulio Benetti

Hi Arnout, Thomas, All,

Quoted 17 lines · Giulio Benetti

Hi Arnout,

Quoted 14 lines · Arnout Vandecappelle
Quoted 6 lines · Giulio Benetti

This bug has been fixed upstream and backported to buildroot binutils package. So let's remove it from toolchain/Config.in and from packages that are affected by it:
- libgeos
- postgis
- protobuf

It's not clear to me if all the external toolchains that we use also have this
patch already. Basically that boils down to the stable and bleeding edge bootlin toolchains.

Quoted 6 lines
Quoted 1 line

Well, I'm pretty sure they're not yet updated, since they're still 2020.08-1...

For this patch we have to wait until all or1k patches have been applied to Bootlin toolchain and they got rebuilt and bumped.
Then we can apply it since Buildroot will become OpenRisc bug free. But this depends on external OpenRisc toolchains that only Bootlin provide

Quoted 7 lines

Unfortunately libgeos is still affected by this bug and postgis too because it's its dependency. The reason is that libgeos has been bumped and I've never given a build after that.

Only protobuf has been fixed after rebuilding all Bootlin toolchains. So I will report upstream that is usually very responsive and ask to fix this binutils again, hopefully once for all.

I've updated the bug on the gcc side that works together with binutils on the fix:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99783

Best regards

Signature · 6 lines
Giulio Benetti
Benetti Engineering sas
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot