i3c: aspeed: Add I3C support
Subsystems (2)
cover i3c: aspeed: Add I3C support
Hi all,
This series adds I3C bus support to QEMU and adds more functionality to the Aspeed I3C controller.
This implementation is a basic implementation that introduces IBIs (including hot-join), CCCs, and SDR data transfer. As-is, it doesn't support multi-controller buses or HDR transfers.
First we add the I3C bus and controller model. With that added we extend the functionality of the Aspeed I3C controller so it can do transfers and handle IBIs.
Next, we add a mock I3C target. It's intended to be a very simple target just to verify that I3C is working on the guest. Internally, we've used it on Linux to verify that i3C devices can be probed and can send/receive data and IBIs.
This target is sort of like an EEPROM, and it can also send IBIs upon reception of a user-defined magic number.
Lastly we add hotplugging support. The hotplugging doesn't do anything too complicated, it just adds the device attempting to hotplug to the bus. It is the device's responsibility to hot-join and go through the DAA process to participate on the bus.
Thanks,
Joe
Joe Komlodi (19):
hw/misc/aspeed_i3c: Move to i3c directory hw/i3c: Add bus support
hw/i3c: Split DesignWare I3C out of Aspeed I3C hw/i3c/dw-i3c: Add more register fields hw/i3c/aspeed_i3c: Add more register fields hw/i3c/dw-i3c: Add more reset values hw/i3c/aspeed_i3c: Add register RO field masks hw/i3c/dw-i3c: Add register RO field masks hw/i3c/dw-i3c: Treat more registers as read-as-zero hw/i3c/dw-i3c: Use 32 bits on MMIO writes hw/i3c/dw-i3c: Add IRQ MMIO behavior hw/i3c/dw-i3c: Add data TX and RX hw/i3c/dw-i3c: Add IBI handling hw/i3c/dw-i3c: Add ctrl MMIO handling hw/i3c/dw-i3c: Add controller resets hw/i3c/aspeed: Add I3C bus get function hw/i3c: Add Mock target
hw/arm/aspeed: Build with I3C_DEVICES hw/i3c: Add hotplug support
hw/Kconfig | 1 +
hw/arm/Kconfig | 3 +
hw/i3c/Kconfig | 15 +
hw/i3c/aspeed_i3c.c | 261 ++++
hw/i3c/core.c | 669 +++++++++
hw/i3c/dw-i3c.c | 1881 +++++++++++++++++++++++++
hw/i3c/meson.build | 6 +
hw/i3c/mock-i3c-target.c | 311 ++++
hw/i3c/trace-events | 47 +
hw/i3c/trace.h | 2 +
hw/meson.build | 1 +
hw/misc/aspeed_i3c.c | 383 -----
hw/misc/meson.build | 1 -
hw/misc/trace-events | 6 -
include/hw/arm/aspeed_soc.h | 2 +-
include/hw/{misc => i3c}/aspeed_i3c.h | 22 +-
include/hw/i3c/dw-i3c.h | 201 +++
include/hw/i3c/i3c.h | 277 ++++
include/hw/i3c/mock-i3c-target.h | 52 +
meson.build | 1 +
20 files changed, 3735 insertions(+), 407 deletions(-)
create mode 100644 hw/i3c/Kconfig
create mode 100644 hw/i3c/aspeed_i3c.c
create mode 100644 hw/i3c/core.c
create mode 100644 hw/i3c/dw-i3c.c
create mode 100644 hw/i3c/meson.build
create mode 100644 hw/i3c/mock-i3c-target.c
create mode 100644 hw/i3c/trace-events
create mode 100644 hw/i3c/trace.h
delete mode 100644 hw/misc/aspeed_i3c.c
rename include/hw/{misc => i3c}/aspeed_i3c.h (63%)
create mode 100644 include/hw/i3c/dw-i3c.h
create mode 100644 include/hw/i3c/i3c.h
create mode 100644 include/hw/i3c/mock-i3c-target.hSignature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
PATCH 1/19 hw/misc/aspeed_i3c: Move to i3c directory
Moves the Aspeed I3C model and traces into hw/i3c and creates I3C build files.
---
hw/Kconfig | 1 +
hw/arm/Kconfig | 1 +
hw/i3c/Kconfig | 2 ++
hw/{misc => i3c}/aspeed_i3c.c | 2 +-
hw/i3c/meson.build | 3 +++
hw/i3c/trace-events | 7 +++++++
hw/i3c/trace.h | 2 ++
hw/meson.build | 1 +
hw/misc/meson.build | 1 -
hw/misc/trace-events | 6 ------
include/hw/arm/aspeed_soc.h | 2 +-
include/hw/{misc => i3c}/aspeed_i3c.h | 0
meson.build | 1 +
13 files changed, 20 insertions(+), 9 deletions(-)
create mode 100644 hw/i3c/Kconfig
rename hw/{misc => i3c}/aspeed_i3c.c (99%)
create mode 100644 hw/i3c/meson.build
create mode 100644 hw/i3c/trace-events
create mode 100644 hw/i3c/trace.h
rename include/hw/{misc => i3c}/aspeed_i3c.h (100%)hw/Kconfig +1 -0
@@ -13,6 +13,7 @@ source fsi/Kconfig source gpio/Kconfig source hyperv/Kconfig source i2c/Kconfig +source i3c/Kconfig source ide/Kconfig source input/Kconfig source intc/Kconfig
hw/arm/Kconfig +1 -0
@@ -530,6 +530,7 @@ config ASPEED_SOC select DS1338 select FTGMAC100 select I2C + select I3C select DPS310 select PCA9552 select SERIAL_MM
hw/i3c/Kconfig new file +2 -0
@@ -0,0 +1,2 @@ +config I3C + bool
hw/i3c/aspeed_i3c.c renamed from hw/misc/aspeed_i3c.c +1 -1
@@ -10,7 +10,7 @@#include "qemu/osdep.h" #include "qemu/log.h" #include "qemu/error-report.h" -#include "hw/misc/aspeed_i3c.h" +#include "hw/i3c/aspeed_i3c.h" #include "hw/registerfields.h" #include "hw/qdev-properties.h" #include "qapi/error.h"
hw/i3c/meson.build new file +3 -0
@@ -0,0 +1,3 @@ +i3c_ss = ss.source_set() +i3c_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_i3c.c')) +system_ss.add_all(when: 'CONFIG_I3C', if_true: i3c_ss)
hw/i3c/trace-events new file +7 -0
@@ -0,0 +1,7 @@ +# See docs/devel/tracing.rst for syntax documentation. + +# aspeed_i3c.c +aspeed_i3c_read(uint64_t offset, uint64_t data) "I3C read: offset 0x%" PRIx64 " data 0x%" PRIx64 +aspeed_i3c_write(uint64_t offset, uint64_t data) "I3C write: offset 0x%" PRIx64 " data 0x%" PRIx64 +aspeed_i3c_device_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64 +aspeed_i3c_device_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64
hw/i3c/trace.h new file +2 -0
@@ -0,0 +1,2 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#include "trace/trace-hw_i3c.h"
hw/meson.build +1 -0
@@ -12,6 +12,7 @@ subdir('dma') subdir('gpio') subdir('hyperv') subdir('i2c') +subdir('i3c') subdir('ide') subdir('input') subdir('intc')
hw/misc/meson.build +0 -1
@@ -130,7 +130,6 @@ system_ss.add(when: 'CONFIG_PVPANIC_MMIO', if_true: files('pvpanic-mmio.c')) system_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files( 'aspeed_hace.c', - 'aspeed_i3c.c', 'aspeed_lpc.c', 'aspeed_scu.c', 'aspeed_sbc.c',
hw/misc/trace-events +0 -6
@@ -287,12 +287,6 @@ armsse_mhu_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 MHU wri # aspeed_xdma.c aspeed_xdma_write(uint64_t offset, uint64_t data) "XDMA write: offset 0x%" PRIx64 " data 0x%" PRIx64 -# aspeed_i3c.c -aspeed_i3c_read(uint64_t offset, uint64_t data) "I3C read: offset 0x%" PRIx64 " data 0x%" PRIx64 -aspeed_i3c_write(uint64_t offset, uint64_t data) "I3C write: offset 0x%" PRIx64 " data 0x%" PRIx64 -aspeed_i3c_device_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64 -aspeed_i3c_device_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64 - # aspeed_sdmc.c aspeed_sdmc_write(uint64_t reg, uint64_t data) "reg @0x%" PRIx64 " data: 0x%" PRIx64 aspeed_sdmc_read(uint64_t reg, uint64_t data) "reg @0x%" PRIx64 " data: 0x%" PRIx64
include/hw/arm/aspeed_soc.h +1 -1
@@ -23,7 +23,7 @@#include "hw/timer/aspeed_timer.h" #include "hw/rtc/aspeed_rtc.h" #include "hw/i2c/aspeed_i2c.h" -#include "hw/misc/aspeed_i3c.h" +#include "hw/i3c/aspeed_i3c.h" #include "hw/ssi/aspeed_smc.h" #include "hw/misc/aspeed_hace.h" #include "hw/misc/aspeed_sbc.h"
include/hw/i3c/aspeed_i3c.h renamed from include/hw/misc/aspeed_i3c.h +0 -0
meson.build +1 -0
@@ -3651,6 +3651,7 @@ if have_system 'hw/fsi', 'hw/hyperv', 'hw/i2c', + 'hw/i3c', 'hw/i386', 'hw/i386/xen', 'hw/i386/kvm',
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
Re: [PATCH 01/19] hw/misc/aspeed_i3c: Move to i3c directory
Quoted 4 lines · Joe Komlodi
Moves the Aspeed I3C model and traces into hw/i3c and creates I3C build files.
Signed-off-by Joe Komlodi <[email protected]>
Quoted 2 lines
Reviewed-by Patrick Venture <[email protected]>Reviewed-by Titus Rwantare <[email protected]>
Internal reviews are not of much value. It's better to send without these tags and restart the assessment on the public mailing lists.
Thanks,
C.
Quoted 170 lines
--- hw/Kconfig | 1 + hw/arm/Kconfig | 1 + hw/i3c/Kconfig | 2 ++ hw/{misc => i3c}/aspeed_i3c.c | 2 +- hw/i3c/meson.build | 3 +++ hw/i3c/trace-events | 7 +++++++ hw/i3c/trace.h | 2 ++ hw/meson.build | 1 + hw/misc/meson.build | 1 - hw/misc/trace-events | 6 ------ include/hw/arm/aspeed_soc.h | 2 +- include/hw/{misc => i3c}/aspeed_i3c.h | 0 meson.build | 1 + 13 files changed, 20 insertions(+), 9 deletions(-)create mode 100644 hw/i3c/Kconfig
rename hw/{misc =>i3c}/aspeed_i3c.c(99%) create mode 100644 hw/i3c/meson.build create mode 100644 hw/i3c/trace-events create mode 100644hw/i3c/trace.h
renameinclude/hw/{misc=>i3c}/aspeed_i3c.h(100%)hw/Kconfig +1
-0@@ -13,6 +13,7 @@ source fsi/Kconfig source gpio/Kconfig source hyperv/Kconfig source i2c/Kconfig +source i3c/Kconfig source ide/Kconfig source input/Kconfig source intc/Kconfighw/arm/Kconfig +1
-0@@ -530,6 +530,7 @@ config ASPEED_SOC select DS1338 select FTGMAC100 select I2C + select I3C select DPS310 select PCA9552 select SERIAL_MMhw/i3c/Kconfig new file +2
-0@@ -0,0 +1,2 @@ +config I3C + boolhw/i3c/aspeed_i3c.c renamed from hw/misc/aspeed_i3c.c +1
-1@@ -10,7 +10,7 @@#include "qemu/osdep.h" #include "qemu/log.h" #include "qemu/error-report.h" -#include "hw/misc/aspeed_i3c.h" +#include "hw/i3c/aspeed_i3c.h" #include "hw/registerfields.h" #include "hw/qdev-properties.h" #include "qapi/error.h" hw/i3c/meson.build new file +3
-0@@ -0,0 +1,3 @@ +i3c_ss = ss.source_set() +i3c_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_i3c.c')) +system_ss.add_all(when: 'CONFIG_I3C', if_true: i3c_ss)hw/i3c/trace-events new file +7
-0@@ -0,0 +1,7 @@ +# See docs/devel/tracing.rst for syntax documentation. + +# aspeed_i3c.c +aspeed_i3c_read(uint64_t offset, uint64_t data) "I3C read: offset 0x%" PRIx64 " data 0x%" PRIx64 +aspeed_i3c_write(uint64_t offset, uint64_t data) "I3C write: offset 0x%" PRIx64 " data 0x%" PRIx64 +aspeed_i3c_device_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64 +aspeed_i3c_device_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64hw/i3c/trace.h new file +2
-0@@ -0,0 +1,2 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#include "trace/trace-hw_i3c.h" hw/meson.build +1
-0@@ -12,6 +12,7 @@ subdir('dma') subdir('gpio') subdir('hyperv') subdir('i2c') +subdir('i3c') subdir('ide') subdir('input') subdir('intc')hw/misc/meson.build +0
-1@@ -130,7 +130,6 @@ system_ss.add(when: 'CONFIG_PVPANIC_MMIO', if_true: files('pvpanic-mmio.c')) system_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files( 'aspeed_hace.c', - 'aspeed_i3c.c', 'aspeed_lpc.c', 'aspeed_scu.c', 'aspeed_sbc.c',hw/misc/trace-events +0
-6@@ -287,12 +287,6 @@ armsse_mhu_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 MHU wri # aspeed_xdma.c aspeed_xdma_write(uint64_t offset, uint64_t data) "XDMA write: offset 0x%" PRIx64 " data 0x%" PRIx64 -# aspeed_i3c.c -aspeed_i3c_read(uint64_t offset, uint64_t data) "I3C read: offset 0x%" PRIx64 " data 0x%" PRIx64 -aspeed_i3c_write(uint64_t offset, uint64_t data) "I3C write: offset 0x%" PRIx64 " data 0x%" PRIx64 -aspeed_i3c_device_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64 -aspeed_i3c_device_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64 - # aspeed_sdmc.c aspeed_sdmc_write(uint64_t reg, uint64_t data) "reg @0x%" PRIx64 " data: 0x%" PRIx64 aspeed_sdmc_read(uint64_t reg, uint64_t data) "reg @0x%" PRIx64 " data: 0x%" PRIx64include/hw/arm/aspeed_soc.h +1
-1@@ -23,7 +23,7 @@#include "hw/timer/aspeed_timer.h" #include "hw/rtc/aspeed_rtc.h" #include "hw/i2c/aspeed_i2c.h" -#include "hw/misc/aspeed_i3c.h" +#include "hw/i3c/aspeed_i3c.h" #include "hw/ssi/aspeed_smc.h" #include "hw/misc/aspeed_hace.h" #include "hw/misc/aspeed_sbc.h" include/hw/i3c/aspeed_i3c.h renamed from include/hw/misc/aspeed_i3c.h +0
-0meson.build +1
-0@@ -3651,6 +3651,7 @@ if have_system 'hw/fsi', 'hw/hyperv', 'hw/i2c', + 'hw/i3c', 'hw/i386', 'hw/i386/xen', 'hw/i386/kvm',
Re: [PATCH 01/19] hw/misc/aspeed_i3c: Move to i3c directory
Quoted 8 lines · Cédric Le Goater
Quoted 4 lines · Joe Komlodi
Moves the Aspeed I3C model and traces into hw/i3c and creates I3C build files.
Signed-off-by Joe Komlodi <[email protected]>
Quoted 8 lines
Reviewed-by Cédric Le Goater <[email protected]>Quoted 2 lines
Reviewed-by Patrick Venture <[email protected]>Reviewed-by Titus Rwantare <[email protected]>Internal reviews are not of much value. It's better to send without these tags and restart the assessment on the public mailing lists.
Ack. I'll remove them in v2.
Thanks,
Joe
Quoted 179 lines
Thanks,
C.
Quoted 170 lines
--- hw/Kconfig | 1 + hw/arm/Kconfig | 1 + hw/i3c/Kconfig | 2 ++ hw/{misc => i3c}/aspeed_i3c.c | 2 +- hw/i3c/meson.build | 3 +++ hw/i3c/trace-events | 7 +++++++ hw/i3c/trace.h | 2 ++ hw/meson.build | 1 + hw/misc/meson.build | 1 - hw/misc/trace-events | 6 ------ include/hw/arm/aspeed_soc.h | 2 +- include/hw/{misc => i3c}/aspeed_i3c.h | 0 meson.build | 1 + 13 files changed, 20 insertions(+), 9 deletions(-)create mode 100644 hw/i3c/Kconfig
rename hw/{misc =>i3c}/aspeed_i3c.c(99%) create mode 100644 hw/i3c/meson.build create mode 100644 hw/i3c/trace-events create mode 100644hw/i3c/trace.h
renameinclude/hw/{misc=>i3c}/aspeed_i3c.h(100%)hw/Kconfig +1
-0@@ -13,6 +13,7 @@ source fsi/Kconfig source gpio/Kconfig source hyperv/Kconfig source i2c/Kconfig +source i3c/Kconfig source ide/Kconfig source input/Kconfig source intc/Kconfighw/arm/Kconfig +1
-0@@ -530,6 +530,7 @@ config ASPEED_SOC select DS1338 select FTGMAC100 select I2C + select I3C select DPS310 select PCA9552 select SERIAL_MMhw/i3c/Kconfig new file +2
-0@@ -0,0 +1,2 @@ +config I3C + boolhw/i3c/aspeed_i3c.c renamed from hw/misc/aspeed_i3c.c +1
-1@@ -10,7 +10,7 @@#include "qemu/osdep.h" #include "qemu/log.h" #include "qemu/error-report.h" -#include "hw/misc/aspeed_i3c.h" +#include "hw/i3c/aspeed_i3c.h" #include "hw/registerfields.h" #include "hw/qdev-properties.h" #include "qapi/error.h" hw/i3c/meson.build new file +3
-0@@ -0,0 +1,3 @@ +i3c_ss = ss.source_set() +i3c_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_i3c.c')) +system_ss.add_all(when: 'CONFIG_I3C', if_true: i3c_ss)hw/i3c/trace-events new file +7
-0@@ -0,0 +1,7 @@ +# See docs/devel/tracing.rst for syntax documentation. + +# aspeed_i3c.c +aspeed_i3c_read(uint64_t offset, uint64_t data) "I3C read: offset 0x%" PRIx64 " data 0x%" PRIx64 +aspeed_i3c_write(uint64_t offset, uint64_t data) "I3C write: offset 0x%" PRIx64 " data 0x%" PRIx64 +aspeed_i3c_device_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64 +aspeed_i3c_device_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64hw/i3c/trace.h new file +2
-0@@ -0,0 +1,2 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#include "trace/trace-hw_i3c.h" hw/meson.build +1
-0@@ -12,6 +12,7 @@ subdir('dma') subdir('gpio') subdir('hyperv') subdir('i2c') +subdir('i3c') subdir('ide') subdir('input') subdir('intc')hw/misc/meson.build +0
-1@@ -130,7 +130,6 @@ system_ss.add(when: 'CONFIG_PVPANIC_MMIO', if_true: files('pvpanic-mmio.c')) system_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files( 'aspeed_hace.c', - 'aspeed_i3c.c', 'aspeed_lpc.c', 'aspeed_scu.c', 'aspeed_sbc.c',hw/misc/trace-events +0
-6@@ -287,12 +287,6 @@ armsse_mhu_write(uint64_t offset, uint64_t data, unsigned size) "SSE-200 MHU wri # aspeed_xdma.c aspeed_xdma_write(uint64_t offset, uint64_t data) "XDMA write: offset 0x%" PRIx64 " data 0x%" PRIx64 -# aspeed_i3c.c -aspeed_i3c_read(uint64_t offset, uint64_t data) "I3C read: offset 0x%" PRIx64 " data 0x%" PRIx64 -aspeed_i3c_write(uint64_t offset, uint64_t data) "I3C write: offset 0x%" PRIx64 " data 0x%" PRIx64 -aspeed_i3c_device_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64 -aspeed_i3c_device_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64 - # aspeed_sdmc.c aspeed_sdmc_write(uint64_t reg, uint64_t data) "reg @0x%" PRIx64 " data: 0x%" PRIx64 aspeed_sdmc_read(uint64_t reg, uint64_t data) "reg @0x%" PRIx64 " data: 0x%" PRIx64include/hw/arm/aspeed_soc.h +1
-1@@ -23,7 +23,7 @@#include "hw/timer/aspeed_timer.h" #include "hw/rtc/aspeed_rtc.h" #include "hw/i2c/aspeed_i2c.h" -#include "hw/misc/aspeed_i3c.h" +#include "hw/i3c/aspeed_i3c.h" #include "hw/ssi/aspeed_smc.h" #include "hw/misc/aspeed_hace.h" #include "hw/misc/aspeed_sbc.h" include/hw/i3c/aspeed_i3c.h renamed from include/hw/misc/aspeed_i3c.h +0
-0meson.build +1
-0@@ -3651,6 +3651,7 @@ if have_system 'hw/fsi', 'hw/hyperv', 'hw/i2c', + 'hw/i3c', 'hw/i386', 'hw/i386/xen', 'hw/i386/kvm',
RE: [PATCH 01/19] hw/misc/aspeed_i3c: Move to i3c directory
In reply to Joe KomlodiQuoted 177 lines
Subject: [PATCH 01/19] hw/misc/aspeed_i3c: Move to i3c directory
Moves the Aspeed I3C model and traces into hw/i3c and creates I3C build files.
Signed-off-by Joe Komlodi <[email protected]>Reviewed-by Patrick Venture <[email protected]>Reviewed-by Titus Rwantare <[email protected]>--- hw/Kconfig | 1 + hw/arm/Kconfig | 1 + hw/i3c/Kconfig | 2 ++ hw/{misc => i3c}/aspeed_i3c.c | 2 +- hw/i3c/meson.build | 3 +++ hw/i3c/trace-events | 7 +++++++ hw/i3c/trace.h | 2 ++ hw/meson.build | 1 + hw/misc/meson.build | 1 - hw/misc/trace-events | 6 ------ include/hw/arm/aspeed_soc.h | 2 +- include/hw/{misc => i3c}/aspeed_i3c.h | 0 meson.build | 1 + 13 files changed, 20 insertions(+), 9 deletions(-) create mode 100644hw/i3c/Kconfig rename hw/{misc =>
i3c}/aspeed_i3c.c(99%) create mode 100644 hw/i3c/meson.build create mode 100644 hw/i3c/trace-events create mode 100644hw/i3c/trace.hrenameinclude/hw/{misc=>i3c}/aspeed_i3c.h(100%)hw/Kconfig +1
-0@@ -13,6 +13,7 @@ source fsi/Kconfig source gpio/Kconfig source hyperv/Kconfig source i2c/Kconfig +source i3c/Kconfig source ide/Kconfig source input/Kconfig source intc/Kconfighw/arm/Kconfig index f543d944c3..427d0f0271 renamed from hw/arm/Kconfig +0
-0100644
hw/arm/Kconfig +1
-0@@ -530,6 +530,7 @@ config ASPEED_SOC select DS1338 select FTGMAC100 select I2C + select I3C select DPS310 select PCA9552 select SERIAL_MMhw/i3c/Kconfig new file mode 100644 index renamed from hw/i3c/Kconfig +0
-00000000000..e07fe445c6
hw/i3c/Kconfig new file +2
-0@@ -0,0 +1,2 @@ +config I3C + boolhw/i3c/aspeed_i3c.c similarity index 99% renamed from hw/misc/aspeed_i3c.c rename to hw/i3c/aspeed_i3c.c index +0
-0
3bef1c84dd..e56822f928100644hw/i3c/aspeed_i3c.c renamed from hw/misc/aspeed_i3c.c +1
-1@@ -10,7 +10,7 @@#include "qemu/osdep.h" #include "qemu/log.h" #include "qemu/error-report.h" -#include "hw/misc/aspeed_i3c.h" +#include "hw/i3c/aspeed_i3c.h" #include "hw/registerfields.h" #include "hw/qdev-properties.h" #include "qapi/error.h" hw/i3c/meson.build new file +3
-0@@ -0,0 +1,3 @@ +i3c_ss = ss.source_set() +i3c_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_i3c.c')) +system_ss.add_all(when: 'CONFIG_I3C', if_true: i3c_ss)hw/i3c/trace-events new file +10
-0@@ -0,0 +1,7 @@ +# See docs/devel/tracing.rst for syntax documentation. + +# aspeed_i3c.c +aspeed_i3c_read(uint64_t offset, uint64_t data) "I3C read: offset 0x%" +PRIx64 " data 0x%" PRIx64 aspeed_i3c_write(uint64_t offset, uint64_t +data) "I3C write: offset 0x%" PRIx64 " data 0x%" PRIx64 +aspeed_i3c_device_read(uint32_t deviceid, uint64_t offset, uint64_t +data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64 +aspeed_i3c_device_write(uint32_t deviceid, uint64_t offset, uint64_t +data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64hw/i3c/trace.h new file mode 100644 index renamed from hw/i3c/trace.h +0
-00000000000..1e0c4eadf0
hw/i3c/trace.h new file +2
-0@@ -0,0 +1,2 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ #include +"trace/trace-hw_i3c.h" hw/meson.build index b91f761fe0..31786f03d0 renamed from hw/meson.build +0
-0100644
hw/meson.build +1
-0@@ -12,6 +12,7 @@ subdir('dma') subdir('gpio') subdir('hyperv') subdir('i2c') +subdir('i3c') subdir('ide') subdir('input') subdir('intc')hw/misc/meson.build index renamed from hw/misc/meson.build +0
-0
6d47de482c..4a41716625100644hw/misc/meson.build +0
-1@@ -130,7 +130,6 @@ system_ss.add(when: 'CONFIG_PVPANIC_MMIO', if_true: files('pvpanic-mmio.c')) system_ss.add(when: 'CONFIG_AUX', if_true: files('auxbus.c')) system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files( 'aspeed_hace.c', - 'aspeed_i3c.c', 'aspeed_lpc.c', 'aspeed_scu.c','aspeed_sbc.c',hw/misc/trace-events index renamed from hw/misc/trace-events +0
-0
e3f64c0ff6..f70459b3b7100644hw/misc/trace-events +0
-0@@ -287,12 +287,6 @@ armsse_mhu_write(uint64_t offset, uint64_t data,unsigned size) "SSE-200 MHU wri #
aspeed_xdma.caspeed_xdma_write(uint64_t offset, uint64_t data)"XDMA write: offset 0x%" PRIx64 " data 0x%" PRIx64hw/misc/trace-events +0
-2-# aspeed_i3c.c -aspeed_i3c_read(uint64_t offset, uint64_t data) "I3C read: offset 0x%" PRIx64" data 0x%" PRIx64 -aspeed_i3c_write(uint64_t offset,
uint64_tdata) "I3C
write: offset 0x%" PRIx64 " data 0x%" PRIx64 -aspeed_i3c_device_read(uint32_t deviceid,uint64_toffset,uint64_tdata) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64 -aspeed_i3c_device_write(uint32_t deviceid,uint64_toffset,uint64_tdata) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64
-# aspeed_sdmc.c aspeed_sdmc_write(uint64_t reg, uint64_t data) "reg @0x%" PRIx64 " data: 0x%" PRIx64 aspeed_sdmc_read(uint64_t reg, uint64_t data) "reg @0x%" PRIx64 " data: 0x%" PRIx64 diff --git a/include/hw/arm/aspeed_soc.h b/include/hw/arm/aspeed_soc.h index 217ef0eafd..07265f26cf 100644include/hw/arm/aspeed_soc.h +1
-1@@ -23,7 +23,7 @@#include "hw/timer/aspeed_timer.h" #include "hw/rtc/aspeed_rtc.h" #include "hw/i2c/aspeed_i2c.h" -#include "hw/misc/aspeed_i3c.h" +#include "hw/i3c/aspeed_i3c.h" #include "hw/ssi/aspeed_smc.h" #include "hw/misc/aspeed_hace.h" #include "hw/misc/aspeed_sbc.h" include/hw/i3c/aspeed_i3c.h renamed from include/hw/misc/aspeed_i3c.h +0
-0
include/hw/i3c/aspeed_i3c.hdiff --git a/meson.build b/meson.build index34729c2a3d..186effb84f100644meson.build +1
-1@@ -3651,6 +3651,7 @@ if have_system 'hw/fsi', 'hw/hyperv', 'hw/i2c', + 'hw/i3c', 'hw/i386', 'hw/i386/xen', 'hw/i386/kvm', --
Quoted 1 line
2.50.0.rc1.591.g9c95f17f64-goog
Thanks,
Jamin
PATCH 2/19 hw/i3c: Add bus support
In reply to Joe KomlodiAdds an I3C bus and a target class.
The bus supports:
- I3C data transmission and reception
- CCCs (including ENTDAA)
- IBIs
- legacy I2C transactions
General usage of the bus is similar to I2C. Users are expected to initialize a bus via i3c_init_bus, and use the bus returned from the init function to do transactions on the bus.
In order to handle IBIs, the controller provides callbacks to handle receiving an IBI from a target, receiving (optional) additional IBI bytes from a target, and handling when a target is done with its IBI.
Similarly, target creation is done via i3c_target_create_simple and users use the provided I3CTarget to handle transactions. The target has functions provided that it can use to invoke an IBI and send additional bytes.
Along with the send, recv, and event callbacks that are expected of an I3C target, which are similar to I2C, there is a separate callback for CCC handling.
This is to help encapsulate CCC handling and keep it separate from target-specific read/write functionality.
To avoid repition for required CCCs among I3C targets, there is some class-level CCC handling added. The CCC is then passed to the target in case it needs to handle it in some way.
--- hw/i3c/core.c | 652 +++++++++++++++++++++++++++++++++++++++++++ hw/i3c/meson.build | 1 + hw/i3c/trace-events | 16 ++ include/hw/i3c/i3c.h | 277 ++++++++++++++++++ 4 files changed, 946 insertions(+) create mode 100644 hw/i3c/core.c create mode 100644 include/hw/i3c/i3c.h
hw/i3c/core.c new file +652 -0
@@ -0,0 +1,652 @@ +/* +* QEMU I3C bus interface. +* +* Copyright 2025 Google LLC +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/i3c/i3c.h" +#include "hw/qdev-properties.h" + +/* +* In test mode (enabled by ENTTM CCC) we're supposed to send a random PID +* during ENTDAA, so we'll just send "QEMU". +*/ +#define TEST_MODE_PROVISIONED_ID 0x0000554d4551ULL + +static const Property i3c_props[] = { + DEFINE_PROP_UINT8("static-address", struct I3CTarget, static_address, 0), + DEFINE_PROP_UINT8("dcr", struct I3CTarget, dcr, 0), + DEFINE_PROP_UINT8("bcr", struct I3CTarget, bcr, 0), + DEFINE_PROP_UINT64("pid", struct I3CTarget, pid, 0), +}; + +static const TypeInfo i3c_bus_info = { + .name =TYPE_I3C_BUS , + .parent =TYPE_BUS , + .instance_size =sizeof (I3CBus), + .class_size =sizeof (I3CBusClass), +}; + +I3CBus *i3c_init_bus (DeviceState *parent,const char *name) +{ +return i3c_init_bus_type (TYPE_I3C_BUS , parent, name); +} + +I3CBus *i3c_init_bus_type (const char *type,DeviceState *parent, +const char *name) +{ +I3CBus *bus; + + bus =I3C_BUS (qbus_new (type, parent, name)); +QLIST_INIT (&bus->current_devs); + bus->broadcast = false; + bus->in_entdaa = false; + bus->in_ccc = false; + +/* I2C init. */ + g_autofree gchar *i2c_bus_name = g_strdup_printf("%s-legacy-i2c", name); + bus->i2c_bus =i2c_init_bus (parent, i2c_bus_name); + +return bus; +} + +bool i3c_bus_busy (I3CBus *bus) +{ +return !QLIST_EMPTY (&bus->current_devs); +} + +static bool i3c_target_match (I3CTarget *candidate,uint8_t address, +bool is_recv,bool broadcast,bool in_entdaa) +{ +/* Once a target has a dynamic address, it only responds to that. */ +uint8_t targ_addr = candidate->address ? candidate->address : + candidate->static_address; + +if (in_entdaa) { +if (address !=I3C_BROADCAST ) { + g_autofree char *path = +object_get_canonical_path (OBJECT (candidate)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: I3C Address 0x%.2x sent during " +"ENTDAA instead of a broadcast address\n" , + path, address); +return false; + } + +/* +* Targets should only ACK ENTDAA broadcasts if they have no dynamic +* address. +*/ +return candidate->address ==0 ; + } + +/* Return if our addresses match, or if it's a broadcast. */ +return targ_addr == address || broadcast; +} + +bool i3c_target_match_and_add (I3CBus *bus,I3CTarget *target,uint8_t address, +enum I3CEvent event) +{ +I3CTargetClass *tc =I3C_TARGET_GET_CLASS (target); +bool matched = tc->target_match (target, address, event ==I3C_START_RECV , + bus->broadcast, bus->in_entdaa); + +if (matched) { + I3CNode *node = g_new(struct I3CNode, 1); + node->target = target; +QLIST_INSERT_HEAD (&bus->current_devs, node, next); + } +return matched; +} + +bool i3c_scan_bus (I3CBus *bus,uint8_t address,enum I3CEvent event) +{ +BusChild *child; +I3CNode *node, *next; + +/* Clear out any devices from a previous (re-)START. */ + QLIST_FOREACH_SAFE(node, &bus->current_devs, next, next) { +QLIST_REMOVE (node, next); +g_free (node); + } + + QTAILQ_FOREACH(child, &bus->qbus.children, sibling) { +DeviceState *qdev = child->child; +I3CTarget *target =I3C_TARGET (qdev); + +if (i3c_target_match_and_add (bus, target, address, event)) { +return true; + } + } + +/* No one on the bus could respond. */ +return false; +} + +/* Class-level event handling, since we do some CCCs at the class level. */ +static int i3c_target_event (I3CTarget *t,enum I3CEvent event) +{ +I3CTargetClass *tc =I3C_TARGET_GET_CLASS (t); +trace_i3c_target_event (t->address, event); + +if (event ==I3C_STOP ) { + t->curr_ccc =0 ; + t->ccc_byte_offset =0 ; + t->in_ccc = false; + } +return tc->event (t, event); +} + +/* +* Sends a START or repeated START and the address for an I3C transaction. +* +* This function returns 0 if a device on the bus was able to respond to the +* address, and non-zero otherwise. +* A non-zero return represents a NACK. +*/ +static int i3c_do_start_transfer (I3CBus *bus,uint8_t address, +enum I3CEvent event) +{ +I3CTargetClass *tc; +I3CNode *node; + +if (address ==I3C_BROADCAST ) { + bus->broadcast = true; +/* If we're not in ENTDAA, a broadcast is the start of a new CCC. */ +if (!bus->in_entdaa) { + bus->in_ccc = false; + } + }else { + bus->broadcast = false; + } + +/* No one responded to the address, NACK it. */ +if (!i3c_scan_bus (bus, address, event)) { +return -1 ; + } + + QLIST_FOREACH(node, &bus->current_devs, next) { +I3CTarget *t = node->target; + + tc =I3C_TARGET_GET_CLASS (t); +if (tc->event) { +int rv =i3c_target_event (t, event); +if (rv && !bus->broadcast) { +return rv; + } + } + } + +return 0 ; +} + +int i3c_start_transfer (I3CBus *bus,uint8_t address,bool is_recv) +{ +trace_i3c_start_transfer (address, is_recv); +return i3c_do_start_transfer (bus, address, is_recv + ?I3C_START_RECV + :I3C_START_SEND ); +} + +int i3c_start_recv (I3CBus *bus,uint8_t address) +{ +trace_i3c_start_transfer (address, true); +return i3c_do_start_transfer (bus, address,I3C_START_RECV ); +} + +int i3c_start_send (I3CBus *bus,uint8_t address) +{ +trace_i3c_start_transfer (address, false); +return i3c_do_start_transfer (bus, address,I3C_START_SEND ); +} + +void i3c_end_transfer (I3CBus *bus) +{ +I3CTargetClass *tc; +I3CNode *node, *next; + +trace_i3c_end_transfer (); + +/* +* If we're in ENTDAA, we need to notify all devices when ENTDAA is done. +* This is because everyone initially participates due to the broadcast, +* but gradually drops out as they get assigned addresses. +* Since the current_devs list only stores who's currently participating, +* and not everyone who previously participated, we send the STOP to all +* children. +*/ +if (bus->in_entdaa) { +BusChild *child; + + QTAILQ_FOREACH(child, &bus->qbus.children, sibling) { +DeviceState *qdev = child->child; +I3CTarget *t =I3C_TARGET (qdev); + tc =I3C_TARGET_GET_CLASS (t); +if (tc->event) { +i3c_target_event (t,I3C_STOP ); + } + } + }else { + QLIST_FOREACH_SAFE(node, &bus->current_devs, next, next) { +I3CTarget *t = node->target; + tc =I3C_TARGET_GET_CLASS (t); +if (tc->event) { +i3c_target_event (t,I3C_STOP ); + } +QLIST_REMOVE (node, next); +g_free (node); + } + } + bus->broadcast = false; + bus->in_entdaa = false; + bus->in_ccc = false; +} + +/* +* Any CCCs that are universal across all I3C devices should be handled here. +* Once they're handled, we pass the CCC up to the I3C target to do anything +* else it may want with the bytes. +*/ +static int i3c_target_handle_ccc_write (I3CTarget *t,const uint8_t *data, +uint32_t num_to_send,uint32_t *num_sent) +{ +I3CTargetClass *tc =I3C_TARGET_GET_CLASS (t); + *num_sent =0 ; + +/* Is this the start of a new CCC? */ +if (!t->in_ccc) { + t->curr_ccc = *data; + t->in_ccc = true; + *num_sent =1 ; +trace_i3c_target_handle_ccc (t->address, t->curr_ccc); + } + +switch (t->curr_ccc) { +case I3C_CCC_ENTDAA : +/* +* This is the last byte of ENTDAA, the controller is assigning us an +* address. +*/ +if (t->ccc_byte_offset ==8 ) { + t->address = *data; + t->in_ccc = false; + t->curr_ccc =0 ; + t->ccc_byte_offset =0 ; + *num_sent =1 ; + } +break ; +case I3C_CCCD_SETDASA : + t->address = t->static_address; +break ; +case I3C_CCC_SETAASA : + t->address = t->static_address; +break ; +case I3C_CCC_RSTDAA : + t->address =0 ; +break ; +case I3C_CCCD_SETNEWDA : +/* If this isn't the CCC byte, it's our new address. */ +if (*num_sent ==0 ) { + t->address = *data; + *num_sent =1 ; + } +break ; +case I3C_CCC_ENTTM : +/* +* If there are still more to look at, the next byte is the test mode +* byte. +*/ +if (*num_sent != num_to_send) { +/* Enter test mode if the byte is non-zero. Otherwise exit. */ + t->in_test_mode = !!data[*num_sent]; + ++*num_sent; + } +break ; +/* Ignore other CCCs it's better to handle on a device-by-device basis. */ +default : +break ; + } +return tc->handle_ccc_write (t, data, num_to_send, num_sent); +} + +int i3c_send_byte (I3CBus *bus,uint8_t data) +{ +/* +* Ignored, the caller can determine how many were sent based on if this was +* ACKed/NACKed. +*/ +uint32_t num_sent; +return i3c_send (bus, &data,1 , &num_sent); +} + +int i3c_send (I3CBus *bus,const uint8_t *data,uint32_t num_to_send, +uint32_t *num_sent) +{ +I3CTargetClass *tc; +I3CTarget *t; +I3CNode *node; +int ret =0 ; + +/* If this message is a broadcast and no CCC has been found, grab it. */ +if (bus->broadcast && !bus->in_ccc) { + bus->ccc = *data; + bus->in_ccc = true; +/* +* We need to keep track if we're currently in ENTDAA. +* On any other CCC, the CCC is over on a RESTART or STOP, but ENTDAA +* is only over on a STOP. +*/ +if (bus->ccc ==I3C_CCC_ENTDAA ) { + bus->in_entdaa = true; + } + } + + QLIST_FOREACH(node, &bus->current_devs, next) { + t = node->target; + tc =I3C_TARGET_GET_CLASS (t); +if (bus->in_ccc) { +if (!tc->handle_ccc_write) { + ret =-1 ; +continue ; + } + ret =i3c_target_handle_ccc_write (t, data, num_to_send, num_sent); +/* Targets should only NACK on a direct CCC. */ +if (ret && !CCC_IS_DIRECT (bus->ccc)) { + ret =0 ; + } + }else { +if (tc->send) { + ret = ret || tc->send (t, data, num_to_send, num_sent); + }else { + ret =-1 ; + } + } + } + +trace_i3c_send (*num_sent, num_to_send, ret ==0 ); + +return ret ?-1 :0 ; +} + +static int i3c_target_handle_ccc_read (I3CTarget *t,uint8_t *data, +uint32_t num_to_read,uint32_t *num_read) +{ +I3CTargetClass *tc =I3C_TARGET_GET_CLASS (t); +uint8_t read_count =0 ; +uint64_t pid; + +switch (t->curr_ccc) { +case I3C_CCC_ENTDAA : +if (t->in_test_mode) { + pid =TEST_MODE_PROVISIONED_ID ; + }else { + pid = t->pid; + } +/* Return the 6-byte PID, followed by BCR then DCR. */ +while (t->ccc_byte_offset <6 ) { +if (read_count >= num_to_read) { +break ; + } + data[read_count] = (pid >> (t->ccc_byte_offset *8 )) &0xff ; + t->ccc_byte_offset++; + read_count++; + } +if (read_count < num_to_read) { + data[read_count] = t->bcr; + t->ccc_byte_offset++; + read_count++; + } +if (read_count < num_to_read) { + data[read_count] = t->dcr; + t->ccc_byte_offset++; + read_count++; + } + *num_read = read_count; +break ; +case I3C_CCCD_GETPID : +while (t->ccc_byte_offset <6 ) { +if (read_count >= num_to_read) { +break ; + } + data[read_count] = (t->pid >> (t->ccc_byte_offset *8 )) &0xff ; + t->ccc_byte_offset++; + read_count++; + } + *num_read = read_count; +break ; +case I3C_CCCD_GETBCR : + *data = t->bcr; + *num_read =1 ; +break ; +case I3C_CCCD_GETDCR : + *data = t->dcr; + *num_read =1 ; +break ; +default : +/* Unhandled on the I3CTarget class level. */ +break ; + } + +return tc->handle_ccc_read (t, data, num_to_read, num_read); +} + +int i3c_recv_byte (I3CBus *bus,uint8_t *data) +{ +/* +* Ignored, the caller can determine how many bytes were read based on if +* this is ACKed/NACKed. +*/ +uint32_t num_read; +return i3c_recv (bus, data,1 , &num_read); +} + +int i3c_recv (I3CBus *bus,uint8_t *data,uint32_t num_to_read, +uint32_t *num_read) +{ +int ret =0 ; +I3CTargetClass *tc; +I3CTarget *t; + + *data =0xff ; +if (!QLIST_EMPTY (&bus->current_devs)) { + tc =I3C_TARGET_GET_CLASS (QLIST_FIRST (&bus->current_devs)->target); + t =QLIST_FIRST (&bus->current_devs)->target; +if (bus->in_ccc) { +if (!tc->handle_ccc_read) { +return -1 ; + } + ret =i3c_target_handle_ccc_read (t, data, num_to_read, num_read); + }else { +if (tc->recv) { +/* +* Targets cannot NACK on a direct transfer, so the data +* is returned directly. +*/ + *num_read = tc->recv (t, data, num_to_read); + } + } + } + +trace_i3c_recv (*num_read, num_to_read, ret ==0 ); + +return ret; +} + +void i3c_nack (I3CBus *bus) +{ +I3CTargetClass *tc; +I3CNode *node; + +if (QLIST_EMPTY (&bus->current_devs)) { +return ; + } + + QLIST_FOREACH(node, &bus->current_devs, next) { + tc =I3C_TARGET_GET_CLASS (node->target); +if (tc->event) { +i3c_target_event (node->target,I3C_NACK ); + } + } +} + +int i3c_target_send_ibi (I3CTarget *t,uint8_t addr,bool is_recv) +{ +I3CBus *bus =I3C_BUS (t->qdev.parent_bus); +I3CBusClass *bc =I3C_BUS_GET_CLASS (bus); +trace_i3c_target_send_ibi (addr, is_recv); +return bc->ibi_handle (bus, addr, is_recv); +} + +int i3c_target_send_ibi_bytes (I3CTarget *t,uint8_t data) +{ +I3CBus *bus =I3C_BUS (t->qdev.parent_bus); +I3CBusClass *bc =I3C_BUS_GET_CLASS (bus); +trace_i3c_target_send_ibi_bytes (data); +return bc->ibi_recv (bus, data); +} + +int i3c_target_ibi_finish (I3CTarget *t,uint8_t data) +{ +I3CBus *bus =I3C_BUS (t->qdev.parent_bus); +I3CBusClass *bc =I3C_BUS_GET_CLASS (bus); +trace_i3c_target_ibi_finish (); +return bc->ibi_finish (bus); +} + +static bool i3c_addr_is_rsvd (uint8_t addr) +{ +const bool is_rsvd[255 ] = { + [0x00 ] = true, + [0x01 ] = true, + [0x02 ] = true, + [0x3e ] = true, + [0x5e ] = true, + [0x6e ] = true, + [0x76 ] = true, + [0x7a ] = true, + [0x7c ] = true, + [0x7e ] = true, + [0x7f ] = true, + }; + +return is_rsvd[addr]; +} + +I3CTarget *i3c_target_new (const char *name,uint8_t addr,uint8_t dcr, +uint8_t bcr,uint64_t pid) +{ +DeviceState *dev; + + dev =qdev_new (name); +qdev_prop_set_uint8 (dev,"static-address" , addr); +qdev_prop_set_uint8 (dev,"dcr" , dcr); +qdev_prop_set_uint8 (dev,"bcr" , bcr); +qdev_prop_set_uint64 (dev,"pid" , pid); + +if (i3c_addr_is_rsvd (addr)) { + g_autofree char *path = object_get_canonical_path(OBJECT(dev)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: I3C target created with reserved " +"address 0x%.2x\n" , path, addr); + } +return I3C_TARGET (dev); +} + +bool i3c_target_realize_and_unref (I3CTarget *dev,I3CBus *bus,Error **errp) +{ +return qdev_realize_and_unref (&dev->qdev, &bus->qbus, errp); +} + +I3CTarget *i3c_target_create_simple (I3CBus *bus,const char *name,uint8_t addr, +uint8_t dcr,uint8_t bcr,uint64_t pid) +{ +I3CTarget *dev =i3c_target_new (name, addr, dcr, bcr, pid); + dev->address =0 ; +i3c_target_realize_and_unref (dev, bus, &error_abort); + +return dev; +} + +/* Legacy I2C functions. */ +void legacy_i2c_nack (I3CBus *bus) +{ +trace_legacy_i2c_nack (); +i2c_nack (bus->i2c_bus); +} + +uint8_t legacy_i2c_recv (I3CBus *bus) +{ +uint8_t byte =i2c_recv (bus->i2c_bus); +trace_legacy_i2c_recv (byte); +return byte; +} + +int legacy_i2c_send (I3CBus *bus,uint8_t data) +{ +trace_legacy_i2c_send (data); +return i2c_send (bus->i2c_bus, data); +} + +int legacy_i2c_start_transfer (I3CBus *bus,uint8_t address,bool is_recv) +{ +trace_legacy_i2c_start_transfer (address, is_recv); +return i2c_start_transfer (bus->i2c_bus, address, is_recv); +} + +int legacy_i2c_start_recv (I3CBus *bus,uint8_t address) +{ +trace_legacy_i2c_start_transfer (address, true); +return i2c_start_transfer (bus->i2c_bus, address,/*is_recv=*/ true); +} + +int legacy_i2c_start_send (I3CBus *bus,uint8_t address) +{ +trace_legacy_i2c_start_transfer (address, false); +return i2c_start_transfer (bus->i2c_bus, address,/*is_recv=*/ false); +} + +void legacy_i2c_end_transfer (I3CBus *bus) +{ +trace_legacy_i2c_end_transfer (); +i2c_end_transfer (bus->i2c_bus); +} + +I2CSlave *legacy_i2c_device_create_simple (I3CBus *bus,const char *name, +uint8_t addr) +{ +I2CSlave *dev =i2c_slave_new (name, addr); + +i2c_slave_realize_and_unref (dev, bus->i2c_bus, &error_abort); +return dev; +} + +static void i3c_target_class_init (ObjectClass *klass,const void *data) +{ +DeviceClass *k =DEVICE_CLASS (klass); +I3CTargetClass *sc =I3C_TARGET_CLASS (klass); +set_bit (DEVICE_CATEGORY_MISC , k->categories); + k->bus_type =TYPE_I3C_BUS ; +device_class_set_props (k, i3c_props); + sc->target_match = i3c_target_match; +} + +static const TypeInfo i3c_target_type_info = { + .name =TYPE_I3C_TARGET , + .parent =TYPE_DEVICE , + .instance_size =sizeof (I3CTarget), + .abstract = true, + .class_size =sizeof (I3CTargetClass), + .class_init = i3c_target_class_init, +}; + +static void i3c_register_types (void ) +{ +type_register_static (&i3c_bus_info); +type_register_static (&i3c_target_type_info); +} + +type_init (i3c_register_types)
hw/i3c/meson.build +1 -0
@@ -1,3 +1,4 @@ i3c_ss = ss.source_set() +i3c_ss.add(when: 'CONFIG_I3C', if_true: files('core.c')) i3c_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_i3c.c')) system_ss.add_all(when: 'CONFIG_I3C', if_true: i3c_ss)
hw/i3c/trace-events +16 -0
@@ -5,3 +5,19 @@ aspeed_i3c_read(uint64_t offset, uint64_t data) "I3C read: offset 0x%" PRIx64 " aspeed_i3c_write(uint64_t offset, uint64_t data) "I3C write: offset 0x%" PRIx64 " data 0x%" PRIx64 aspeed_i3c_device_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64 aspeed_i3c_device_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64 + +# core.c +i3c_target_event(uint8_t address, uint8_t event) "I3C target 0x%" PRIx8 " event 0x%" PRIx8 +i3c_target_handle_ccc(uint8_t address, uint8_t ccc) "I3C target 0x%" PRIx8 " handling CCC 0x%" PRIx8 +i3c_target_send_ibi(uint8_t address, bool is_recv) "I3C target IBI address 0x%" PRIx8 " RnW=%d" +i3c_target_send_ibi_bytes(uint8_t byte) "I3C target IBI byte 0x%" PRIx8 +i3c_target_ibi_finish(void) "I3C target IBI finish" +i3c_start_transfer(uint8_t address, bool is_recv) "I3C START with address 0x%" PRIx8 " is_recv=%d" +i3c_end_transfer(void) "I3C transfer done" +i3c_send(uint32_t num_sent, uint32_t num_to_send, bool ack) "I3C send %" PRId32 "/%" PRId32 " bytes, ack=%d" +i3c_recv(uint32_t num_read, uint32_t num_to_read, bool ack) "I3C recv %" PRId32 "/%" PRId32 " bytes, ack=%d" +legacy_i2c_nack(void) "Legacy I2C NACK" +legacy_i2c_recv(uint8_t byte) "Legacy I2C recv 0x%" PRIx8 +legacy_i2c_send(uint8_t byte) "Legacy I2C send 0x%" PRIx8 +legacy_i2c_start_transfer(uint8_t address, bool is_recv) "Legacy I2C START with address 0x%" PRIx8 " is_recv=%d" +legacy_i2c_end_transfer(void) "Legacy I2C STOP"
include/hw/i3c/i3c.h new file +277 -0
277 lines not on this page · raw message
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
RE: [PATCH 02/19] hw/i3c: Add bus support
Quoted 1,019 lines
Subject: [PATCH 02/19] hw/i3c: Add bus support
Adds an I3C bus and a target class.
The bus supports:
- I3C data transmission and reception
- CCCs (including ENTDAA)
- IBIs
- legacy I2C transactionsGeneral usage of the bus is similar to I2C. Users are expected to initialize a bus via
i3c_init_bus, and use the bus returned from the init function to do transactions on the bus.In order to handle IBIs, the controller provides callbacks to handle receiving an IBI from a target, receiving (optional) additional IBI bytes from a target, and handling when a target is done with its IBI.
Similarly, target creation is done via
i3c_target_create_simpleand users use the provided I3CTarget to handle transactions.
The target has functions provided that it can use to invoke an IBI and send additional bytes.Along with the send, recv, and event callbacks that are expected of an I3C target, which are similar to I2C, there is a separate callback for CCC handling. This is to help encapsulate CCC handling and keep it separate from target-specific read/write functionality.
To avoid repition for required CCCs among I3C targets, there is some class-level CCC handling added. The CCC is then passed to the target in case it needs to handle it in some way.
Signed-off-by Joe Komlodi <[email protected]>Reviewed-by Patrick Venture <[email protected]>Reviewed-by Titus Rwantare <[email protected]>--- hw/i3c/core.c | 652 +++++++++++++++++++++++++++++++++++++++++++ hw/i3c/meson.build | 1 + hw/i3c/trace-events | 16 ++ include/hw/i3c/i3c.h | 277 ++++++++++++++++++ 4 files changed, 946 insertions(+) create mode 100644 hw/i3c/core.c create mode 100644 include/hw/i3c/i3c.hhw/i3c/core.c new file mode 100644 index renamed from hw/i3c/core.c +0
-00000000000..117d9da7ac
hw/i3c/core.c new file +23
-0@@ -0,0 +1,652 @@ +/* +* QEMU I3C bus interface. +* +* Copyright 2025 Google LLC +* +* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qapi/error.h" +#include "trace.h" +#include "hw/i3c/i3c.h" +#include "hw/qdev-properties.h" + +/* +* In test mode (enabled by ENTTM CCC) we're supposed to send a random +PID +* during ENTDAA, so we'll just send "QEMU". +*/ +#define TEST_MODE_PROVISIONED_ID 0x0000554d4551ULL + +static const Property i3c_props[] = { + DEFINE_PROP_UINT8("static-address", struct I3CTarget, static_address,0),
hw/i3c/core.c new file +26
-0+ DEFINE_PROP_UINT8("dcr", struct I3CTarget, dcr, 0), + DEFINE_PROP_UINT8("bcr", struct I3CTarget, bcr, 0), + DEFINE_PROP_UINT64("pid", struct I3CTarget, pid, 0), }; + +static const TypeInfo i3c_bus_info = { + .name =TYPE_I3C_BUS , + .parent =TYPE_BUS , + .instance_size =sizeof (I3CBus), + .class_size =sizeof (I3CBusClass), +}; + +I3CBus *i3c_init_bus (DeviceState *parent,const char *name) { +return i3c_init_bus_type (TYPE_I3C_BUS , parent, name); } + +I3CBus *i3c_init_bus_type (const char *type,DeviceState *parent, +const char *name) { +I3CBus *bus; + + bus =I3C_BUS (qbus_new (type, parent, name)); +QLIST_INIT (&bus->current_devs); + bus->broadcast = false; + bus->in_entdaa = false; + bus->in_ccc = false; + +/* I2C init. */ + g_autofree gchar *i2c_bus_name = g_strdup_printf("%s-legacy-i2c",name);
hw/i3c/core.c new file +15
-0+ bus->i2c_bus =i2c_init_bus (parent, i2c_bus_name); + +return bus; +} + +bool i3c_bus_busy (I3CBus *bus) +{ +return !QLIST_EMPTY (&bus->current_devs); } + +static bool i3c_target_match (I3CTarget *candidate,uint8_t address, +bool is_recv,bool broadcast,bool +in_entdaa) { +/* Once a target has a dynamic address, it only responds to that. */ + uint8_t targ_addr = candidate->address ? candidate->address : +
candidate->static_address;hw/i3c/core.c new file +6
-0+ +if (in_entdaa) { +if (address !=I3C_BROADCAST ) { + g_autofree char *path = +object_get_canonical_path (OBJECT (candidate)); + qemu_log_mask(LOG_GUEST_ERROR, "%s: I3C Address 0x%.2xsent during "
hw/i3c/core.c new file +7
-0+"ENTDAA instead of a broadcast address\n" , + path, address); +return false; + } + +/* +* Targets should only ACK ENTDAA broadcasts if they have no dynamic
hw/i3c/core.c new file +9
-0+* address. +*/ +return candidate->address ==0 ; + } + +/* Return if our addresses match, or if it's a broadcast. */ +return targ_addr == address || broadcast; } + +bool i3c_target_match_and_add(I3CBus *bus, I3CTarget *target, uint8_taddress,
hw/i3c/core.c new file +3
-0+ enum I3CEvent event) { +I3CTargetClass *tc =I3C_TARGET_GET_CLASS (target); + bool matched = tc->target_match(target, address, event ==
I3C_START_RECV,hw/i3c/core.c new file +95
-0+ bus->broadcast, bus->in_entdaa); + +if (matched) { + I3CNode *node = g_new(struct I3CNode, 1); + node->target = target; +QLIST_INSERT_HEAD (&bus->current_devs, node, next); + } +return matched; +} + +bool i3c_scan_bus (I3CBus *bus,uint8_t address,enum I3CEvent event) { +BusChild *child; +I3CNode *node, *next; + +/* Clear out any devices from a previous (re-)START. */ + QLIST_FOREACH_SAFE(node, &bus->current_devs, next, next) { +QLIST_REMOVE (node, next); +g_free (node); + } + + QTAILQ_FOREACH(child, &bus->qbus.children, sibling) { +DeviceState *qdev = child->child; +I3CTarget *target =I3C_TARGET (qdev); + +if (i3c_target_match_and_add (bus, target, address, event)) { +return true; + } + } + +/* No one on the bus could respond. */ +return false; +} + +/* Class-level event handling, since we do some CCCs at the class +level. */ static int i3c_target_event (I3CTarget *t,enum I3CEvent +event) { +I3CTargetClass *tc =I3C_TARGET_GET_CLASS (t); +trace_i3c_target_event (t->address, event); + +if (event ==I3C_STOP ) { + t->curr_ccc =0 ; + t->ccc_byte_offset =0 ; + t->in_ccc = false; + } +return tc->event (t, event); +} + +/* +* Sends a START or repeated START and the address for an I3C transaction. +* +* This function returns 0 if a device on the bus was able to respond +to the +* address, and non-zero otherwise. +* A non-zero return represents a NACK. +*/ +static int i3c_do_start_transfer (I3CBus *bus,uint8_t address, +enum I3CEvent event) { +I3CTargetClass *tc; +I3CNode *node; + +if (address ==I3C_BROADCAST ) { + bus->broadcast = true; +/* If we're not in ENTDAA, a broadcast is the start of a new CCC. */ +if (!bus->in_entdaa) { + bus->in_ccc = false; + } + }else { + bus->broadcast = false; + } + +/* No one responded to the address, NACK it. */ +if (!i3c_scan_bus (bus, address, event)) { +return -1 ; + } + + QLIST_FOREACH(node, &bus->current_devs, next) { +I3CTarget *t = node->target; + + tc =I3C_TARGET_GET_CLASS (t); +if (tc->event) { +int rv =i3c_target_event (t, event); +if (rv && !bus->broadcast) { +return rv; + } + } + } + +return 0 ; +} + +int i3c_start_transfer (I3CBus *bus,uint8_t address,bool is_recv) { +trace_i3c_start_transfer (address, is_recv); + return i3c_do_start_transfer(bus, address, is_recv + ? I3C_START_RECV + :
I3C_START_SEND); }hw/i3c/core.c new file +18
-0+ +int i3c_start_recv (I3CBus *bus,uint8_t address) { +trace_i3c_start_transfer (address, true); +return i3c_do_start_transfer (bus, address,I3C_START_RECV ); } + +int i3c_start_send (I3CBus *bus,uint8_t address) { +trace_i3c_start_transfer (address, false); +return i3c_do_start_transfer (bus, address,I3C_START_SEND ); } + +void i3c_end_transfer (I3CBus *bus) +{ +I3CTargetClass *tc; +I3CNode *node, *next; + +trace_i3c_end_transfer (); + +/* +* If we're in ENTDAA, we need to notify all devices when ENTDAA is done.
hw/i3c/core.c new file +4
-0+* This is because everyone initially participates due to the broadcast, +* but gradually drops out as they get assigned addresses. +* Since the current_devs list only stores who's currently participating, +* and not everyone who previously participated, we send the STOP to all
hw/i3c/core.c new file +37
-0+* children. +*/ +if (bus->in_entdaa) { +BusChild *child; + + QTAILQ_FOREACH(child, &bus->qbus.children, sibling) { +DeviceState *qdev = child->child; +I3CTarget *t =I3C_TARGET (qdev); + tc =I3C_TARGET_GET_CLASS (t); +if (tc->event) { +i3c_target_event (t,I3C_STOP ); + } + } + }else { + QLIST_FOREACH_SAFE(node, &bus->current_devs, next, next) { +I3CTarget *t = node->target; + tc =I3C_TARGET_GET_CLASS (t); +if (tc->event) { +i3c_target_event (t,I3C_STOP ); + } +QLIST_REMOVE (node, next); +g_free (node); + } + } + bus->broadcast = false; + bus->in_entdaa = false; + bus->in_ccc = false; +} + +/* +* Any CCCs that are universal across all I3C devices should be handled here. +* Once they're handled, we pass the CCC up to the I3C target to do +anything +* else it may want with the bytes. +*/ +static int i3c_target_handle_ccc_write(I3CTarget *t, const uint8_t *data, + uint32_t num_to_send,
uint32_thw/i3c/core.c new file +62
-0+*num_sent) { +I3CTargetClass *tc =I3C_TARGET_GET_CLASS (t); + *num_sent =0 ; + +/* Is this the start of a new CCC? */ +if (!t->in_ccc) { + t->curr_ccc = *data; + t->in_ccc = true; + *num_sent =1 ; +trace_i3c_target_handle_ccc (t->address, t->curr_ccc); + } + +switch (t->curr_ccc) { +case I3C_CCC_ENTDAA : +/* +* This is the last byte of ENTDAA, the controller is assigning us an +* address. +*/ +if (t->ccc_byte_offset ==8 ) { + t->address = *data; + t->in_ccc = false; + t->curr_ccc =0 ; + t->ccc_byte_offset =0 ; + *num_sent =1 ; + } +break ; +case I3C_CCCD_SETDASA : + t->address = t->static_address; +break ; +case I3C_CCC_SETAASA : + t->address = t->static_address; +break ; +case I3C_CCC_RSTDAA : + t->address =0 ; +break ; +case I3C_CCCD_SETNEWDA : +/* If this isn't the CCC byte, it's our new address. */ +if (*num_sent ==0 ) { + t->address = *data; + *num_sent =1 ; + } +break ; +case I3C_CCC_ENTTM : +/* +* If there are still more to look at, the next byte is the test mode +* byte. +*/ +if (*num_sent != num_to_send) { +/* Enter test mode if the byte is non-zero. Otherwise exit. */ + t->in_test_mode = !!data[*num_sent]; + ++*num_sent; + } +break ; +/* Ignore other CCCs it's better to handle on a device-by-device basis. */ +default : +break ; + } +return tc->handle_ccc_write (t, data, num_to_send, num_sent); } + +int i3c_send_byte (I3CBus *bus,uint8_t data) { +/* +* Ignored, the caller can determine how many were sent based on if this was
hw/i3c/core.c new file +20
-0+* ACKed/NACKed. +*/ +uint32_t num_sent; +return i3c_send (bus, &data,1 , &num_sent); } + +int i3c_send (I3CBus *bus,const uint8_t *data,uint32_t num_to_send, +uint32_t *num_sent) +{ +I3CTargetClass *tc; +I3CTarget *t; +I3CNode *node; +int ret =0 ; + +/* If this message is a broadcast and no CCC has been found, grab it. */ +if (bus->broadcast && !bus->in_ccc) { + bus->ccc = *data; + bus->in_ccc = true; +/* +* We need to keep track if we're currently in ENTDAA. +* On any other CCC, the CCC is over on a RESTART or STOP, but ENTDAA
hw/i3c/core.c new file +16
-0+* is only over on a STOP. +*/ +if (bus->ccc ==I3C_CCC_ENTDAA ) { + bus->in_entdaa = true; + } + } + + QLIST_FOREACH(node, &bus->current_devs, next) { + t = node->target; + tc =I3C_TARGET_GET_CLASS (t); +if (bus->in_ccc) { +if (!tc->handle_ccc_write) { + ret =-1 ; +continue ; + } + ret = i3c_target_handle_ccc_write(t, data, num_to_send,
num_sent);hw/i3c/core.c new file +20
-0+/* Targets should only NACK on a direct CCC. */ +if (ret && !CCC_IS_DIRECT (bus->ccc)) { + ret =0 ; + } + }else { +if (tc->send) { + ret = ret || tc->send (t, data, num_to_send, num_sent); + }else { + ret =-1 ; + } + } + } + +trace_i3c_send (*num_sent, num_to_send, ret ==0 ); + +return ret ?-1 :0 ; +} + +static int i3c_target_handle_ccc_read(I3CTarget *t, uint8_t *data, + uint32_t num_to_read,
uint32_thw/i3c/core.c new file +62
-0+*num_read) { +I3CTargetClass *tc =I3C_TARGET_GET_CLASS (t); +uint8_t read_count =0 ; +uint64_t pid; + +switch (t->curr_ccc) { +case I3C_CCC_ENTDAA : +if (t->in_test_mode) { + pid =TEST_MODE_PROVISIONED_ID ; + }else { + pid = t->pid; + } +/* Return the 6-byte PID, followed by BCR then DCR. */ +while (t->ccc_byte_offset <6 ) { +if (read_count >= num_to_read) { +break ; + } + data[read_count] = (pid >> (t->ccc_byte_offset *8 )) &0xff ; + t->ccc_byte_offset++; + read_count++; + } +if (read_count < num_to_read) { + data[read_count] = t->bcr; + t->ccc_byte_offset++; + read_count++; + } +if (read_count < num_to_read) { + data[read_count] = t->dcr; + t->ccc_byte_offset++; + read_count++; + } + *num_read = read_count; +break ; +case I3C_CCCD_GETPID : +while (t->ccc_byte_offset <6 ) { +if (read_count >= num_to_read) { +break ; + } + data[read_count] = (t->pid >> (t->ccc_byte_offset *8 )) &0xff ; + t->ccc_byte_offset++; + read_count++; + } + *num_read = read_count; +break ; +case I3C_CCCD_GETBCR : + *data = t->bcr; + *num_read =1 ; +break ; +case I3C_CCCD_GETDCR : + *data = t->dcr; + *num_read =1 ; +break ; +default : +/* Unhandled on the I3CTarget class level. */ +break ; + } + +return tc->handle_ccc_read (t, data, num_to_read, num_read); } + +int i3c_recv_byte (I3CBus *bus,uint8_t *data) { +/* +* Ignored, the caller can determine how many bytes were read based on if
hw/i3c/core.c new file +15
-0+* this is ACKed/NACKed. +*/ +uint32_t num_read; +return i3c_recv (bus, data,1 , &num_read); } + +int i3c_recv (I3CBus *bus,uint8_t *data,uint32_t num_to_read, +uint32_t *num_read) +{ +int ret =0 ; +I3CTargetClass *tc; +I3CTarget *t; + + *data =0xff ; +if (!QLIST_EMPTY (&bus->current_devs)) { + tc =I3C_TARGET_GET_CLASS(QLIST_FIRST(&bus->current_devs)->target);
hw/i3c/core.c new file +6
-0+ t =QLIST_FIRST (&bus->current_devs)->target; +if (bus->in_ccc) { +if (!tc->handle_ccc_read) { +return -1 ; + } + ret = i3c_target_handle_ccc_read(t, data, num_to_read,
num_read);hw/i3c/core.c new file +84
-0+ }else { +if (tc->recv) { +/* +* Targets cannot NACK on a direct transfer, so the data +* is returned directly. +*/ + *num_read = tc->recv (t, data, num_to_read); + } + } + } + +trace_i3c_recv (*num_read, num_to_read, ret ==0 ); + +return ret; +} + +void i3c_nack (I3CBus *bus) +{ +I3CTargetClass *tc; +I3CNode *node; + +if (QLIST_EMPTY (&bus->current_devs)) { +return ; + } + + QLIST_FOREACH(node, &bus->current_devs, next) { + tc =I3C_TARGET_GET_CLASS (node->target); +if (tc->event) { +i3c_target_event (node->target,I3C_NACK ); + } + } +} + +int i3c_target_send_ibi (I3CTarget *t,uint8_t addr,bool is_recv) { +I3CBus *bus =I3C_BUS (t->qdev.parent_bus); +I3CBusClass *bc =I3C_BUS_GET_CLASS (bus); +trace_i3c_target_send_ibi (addr, is_recv); +return bc->ibi_handle (bus, addr, is_recv); } + +int i3c_target_send_ibi_bytes (I3CTarget *t,uint8_t data) { +I3CBus *bus =I3C_BUS (t->qdev.parent_bus); +I3CBusClass *bc =I3C_BUS_GET_CLASS (bus); +trace_i3c_target_send_ibi_bytes (data); +return bc->ibi_recv (bus, data); +} + +int i3c_target_ibi_finish (I3CTarget *t,uint8_t data) { +I3CBus *bus =I3C_BUS (t->qdev.parent_bus); +I3CBusClass *bc =I3C_BUS_GET_CLASS (bus); +trace_i3c_target_ibi_finish (); +return bc->ibi_finish (bus); +} + +static bool i3c_addr_is_rsvd (uint8_t addr) { +const bool is_rsvd[255 ] = { + [0x00 ] = true, + [0x01 ] = true, + [0x02 ] = true, + [0x3e ] = true, + [0x5e ] = true, + [0x6e ] = true, + [0x76 ] = true, + [0x7a ] = true, + [0x7c ] = true, + [0x7e ] = true, + [0x7f ] = true, + }; + +return is_rsvd[addr]; +} + +I3CTarget *i3c_target_new (const char *name,uint8_t addr,uint8_t dcr, +uint8_t bcr,uint64_t pid) { +DeviceState *dev; + + dev =qdev_new (name); +qdev_prop_set_uint8 (dev,"static-address" , addr); +qdev_prop_set_uint8 (dev,"dcr" , dcr); +qdev_prop_set_uint8 (dev,"bcr" , bcr); +qdev_prop_set_uint64 (dev,"pid" , pid); + +if (i3c_addr_is_rsvd (addr)) { + g_autofree char *path = object_get_canonical_path(OBJECT(dev)); + qemu_log_mask(LOG_GUEST_ERROR, "%s: I3C target created withreserved "
hw/i3c/core.c new file +10
-0+ "address 0x%.2x\n", path, addr); + } +return I3C_TARGET (dev); +} + +bool i3c_target_realize_and_unref (I3CTarget *dev,I3CBus *bus,Error +**errp) { +return qdev_realize_and_unref (&dev->qdev, &bus->qbus, errp); } + +I3CTarget *i3c_target_create_simple(I3CBus *bus, const char *name, uint8_taddr,
hw/i3c/core.c new file +79
-0+ uint8_t dcr, uint8_t bcr, uint64_t +pid) { + I3CTarget *dev = i3c_target_new(name, addr, dcr, bcr, pid); + dev->address =0 ; +i3c_target_realize_and_unref (dev, bus, &error_abort); + +return dev; +} + +/* Legacy I2C functions. */ +void legacy_i2c_nack (I3CBus *bus) +{ +trace_legacy_i2c_nack (); +i2c_nack (bus->i2c_bus); +} + +uint8_t legacy_i2c_recv (I3CBus *bus) +{ +uint8_t byte =i2c_recv (bus->i2c_bus); +trace_legacy_i2c_recv (byte); +return byte; +} + +int legacy_i2c_send (I3CBus *bus,uint8_t data) { +trace_legacy_i2c_send (data); +return i2c_send (bus->i2c_bus, data); } + +int legacy_i2c_start_transfer (I3CBus *bus,uint8_t address,bool +is_recv) { +trace_legacy_i2c_start_transfer (address, is_recv); +return i2c_start_transfer (bus->i2c_bus, address, is_recv); } + +int legacy_i2c_start_recv (I3CBus *bus,uint8_t address) { +trace_legacy_i2c_start_transfer (address, true); +return i2c_start_transfer (bus->i2c_bus, address,/*is_recv=*/ true); +} + +int legacy_i2c_start_send (I3CBus *bus,uint8_t address) { +trace_legacy_i2c_start_transfer (address, false); +return i2c_start_transfer (bus->i2c_bus, address, +/*is_recv=*/ false); } + +void legacy_i2c_end_transfer (I3CBus *bus) { +trace_legacy_i2c_end_transfer (); +i2c_end_transfer (bus->i2c_bus); +} + +I2CSlave *legacy_i2c_device_create_simple (I3CBus *bus,const char *name, +uint8_t addr) { +I2CSlave *dev =i2c_slave_new (name, addr); + +i2c_slave_realize_and_unref (dev, bus->i2c_bus, &error_abort); +return dev; +} + +static void i3c_target_class_init (ObjectClass *klass,const void *data) +{ +DeviceClass *k =DEVICE_CLASS (klass); +I3CTargetClass *sc =I3C_TARGET_CLASS (klass); +set_bit (DEVICE_CATEGORY_MISC , k->categories); + k->bus_type =TYPE_I3C_BUS ; +device_class_set_props (k, i3c_props); + sc->target_match = i3c_target_match; } + +static const TypeInfo i3c_target_type_info = { + .name =TYPE_I3C_TARGET , + .parent =TYPE_DEVICE , + .instance_size =sizeof (I3CTarget), + .abstract = true, + .class_size =sizeof (I3CTargetClass), + .class_init = i3c_target_class_init, }; + +static void i3c_register_types (void ) +{ +type_register_static (&i3c_bus_info); +type_register_static (&i3c_target_type_info); +} + +type_init (i3c_register_types)hw/i3c/meson.build index renamed from hw/i3c/meson.build +0
-0
ebf20325cb..fb127613fe100644hw/i3c/meson.build +1
-0@@ -1,3 +1,4 @@ i3c_ss = ss.source_set() +i3c_ss.add(when: 'CONFIG_I3C', if_true: files('core.c')) i3c_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_i3c.c')) system_ss.add_all(when: 'CONFIG_I3C', if_true: i3c_ss) diff --gita/hw/i3c/trace-events b/hw/i3c/trace-events index
3ead84eb45..cdf7cb07f6100644hw/i3c/trace-events +0
-0@@ -5,3 +5,19 @@ aspeed_i3c_read(uint64_t offset, uint64_t data) "I3C read:offset 0x%" PRIx64 "
aspeed_i3c_write(uint64_t offset, uint64_t data)"I3C write: offset 0x%"
PRIx64 " data 0x%" PRIx64aspeed_i3c_device_read(uint32_t deviceid, uint64_t offset, uint64_t data)"I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64aspeed_i3c_device_write(uint32_t deviceid, uint64_t offset, uint64_t data)"I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64hw/i3c/trace-events +5
-0+ +# core.c +i3c_target_event(uint8_t address, uint8_t event) "I3C target 0x%" PRIx8 +" event 0x%" PRIx8 i3c_target_handle_ccc(uint8_t address, uint8_t ccc) +"I3C target 0x%" PRIx8 " handling CCC 0x%" PRIx8 i3c_target_send_ibi(uint8_taddress, bool
is_recv) "I3C target IBI address 0x%" PRIx8 " RnW=%d"hw/i3c/trace-events +3
-0+i3c_target_send_ibi_bytes(uint8_t byte) "I3C target IBI byte 0x%" PRIx8 +i3c_target_ibi_finish(void) "I3C target IBI finish" +i3c_start_transfer(uint8_t address, bool is_recv) "I3C START with address 0x%"PRIx8 " is_recv=%d"
hw/i3c/trace-events +2
-0+i3c_end_transfer(void) "I3C transfer done" +i3c_send(uint32_t num_sent, uint32_t num_to_send, bool ack) "I3C send %"PRId32 "/%" PRId32 " bytes, ack=%d"
+i3c_recv(uint32_tnum_read,uint32_tnum_to_read, bool ack) "I3C recv %" PRId32 "/%" PRId32 " bytes, ack=%d"hw/i3c/trace-events +4
-0+legacy_i2c_nack(void) "Legacy I2C NACK" +legacy_i2c_recv(uint8_t byte) "Legacy I2C recv 0x%" PRIx8 +legacy_i2c_send(uint8_t byte) "Legacy I2C send 0x%" PRIx8 +legacy_i2c_start_transfer(uint8_t address, bool is_recv) "Legacy I2C STARTwith address 0x%" PRIx8 " is_recv=%d"
hw/i3c/trace-events +1
-0+legacy_i2c_end_transfer(void) "Legacy I2C STOP"include/hw/i3c/i3c.h new file +113
-0@@ -0,0 +1,277 @@ +/* +* QEMU I3C bus interface. +* +* Copyright 2025 Google LLC +* +* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef QEMU_INCLUDE_HW_I3C_I3C_H_ +#define QEMU_INCLUDE_HW_I3C_I3C_H_ + +#include "hw/qdev-core.h" +#include "qom/object.h" +#include "hw/i2c/i2c.h" + +#define TYPE_I3C_TARGET "i3c-target" +OBJECT_DECLARE_TYPE(I3CTarget, I3CTargetClass, I3C_TARGET) + +typedef enum I3CEvent { + I3C_START_RECV, + I3C_START_SEND, + I3C_STOP, + I3C_NACK, +} I3CEvent; + +typedef enum I3CCCC { + /* Broadcast CCCs */ + I3C_CCC_ENEC = 0x00, + I3C_CCC_DISEC = 0x01, + I3C_CCC_ENTAS0 = 0x02, + I3C_CCC_ENTAS1 = 0x03, + I3C_CCC_ENTAS2 = 0x04, + I3C_CCC_ENTAS3 = 0x05, + I3C_CCC_RSTDAA = 0x06, + I3C_CCC_ENTDAA = 0x07, + I3C_CCC_DEFTGTS = 0x08, + I3C_CCC_SETMWL = 0x09, + I3C_CCC_SETMRL = 0x0a, + I3C_CCC_ENTTM = 0x0b, + I3C_CCC_SETBUSCON = 0x0c, + I3C_CCC_ENDXFER = 0x12, + I3C_CCC_ENTHDR0 = 0x20, + I3C_CCC_ENTHDR1 = 0x21, + I3C_CCC_ENTHDR2 = 0x22, + I3C_CCC_ENTHDR3 = 0x23, + I3C_CCC_ENTHDR4 = 0x24, + I3C_CCC_ENTHDR5 = 0x25, + I3C_CCC_ENTHDR6 = 0x26, + I3C_CCC_ENTHDR7 = 0x27, + I3C_CCC_SETXTIME = 0x28, + I3C_CCC_SETAASA = 0x29, + I3C_CCC_RSTACT = 0x2a, + I3C_CCC_DEFGRPA = 0x2b, + I3C_CCC_RSTGRPA = 0x2c, + I3C_CCC_MLANE = 0x2d, + /* Direct CCCs */ + I3C_CCCD_ENEC = 0x80, + I3C_CCCD_DISEC = 0x81, + I3C_CCCD_ENTAS0 = 0x82, + I3C_CCCD_ENTAS1 = 0x83, + I3C_CCCD_ENTAS2 = 0x84, + I3C_CCCD_ENTAS3 = 0x85, + I3C_CCCD_SETDASA = 0x87, + I3C_CCCD_SETNEWDA = 0x88, + I3C_CCCD_SETMWL = 0x89, + I3C_CCCD_SETMRL = 0x8a, + I3C_CCCD_GETMWL = 0x8b, + I3C_CCCD_GETMRL = 0x8c, + I3C_CCCD_GETPID = 0x8d, + I3C_CCCD_GETBCR = 0x8e, + I3C_CCCD_GETDCR = 0x8f, + I3C_CCCD_GETSTATUS = 0x90, + I3C_CCCD_GETACCCR = 0x91, + I3C_CCCD_ENDXFER = 0x92, + I3C_CCCD_SETBRGTGT = 0x93, + I3C_CCCD_GETMXDS = 0x94, + I3C_CCCD_GETCAPS = 0x95, + I3C_CCCD_SETROUTE = 0x96, + I3C_CCCD_SETXTIME = 0x98, + I3C_CCCD_GETXTIME = 0x99, + I3C_CCCD_RSTACT = 0x9a, + I3C_CCCD_SETGRPA = 0x9b, + I3C_CCCD_RSTGRPA = 0x9c, + I3C_CCCD_MLANE = 0x9d, +} I3CCCC; + +#define CCC_IS_DIRECT(_ccc) (_ccc & 0x80) + +#define I3C_BROADCAST 0x7e +#define I3C_HJ_ADDR 0x02 +#define I3C_ENTDAA_SIZE 8 + +struct I3CTargetClass { + DeviceClass parent; + + /* + * Controller to target. Returns 0 for success, non-zero for NAK or other + * error. + */ + int (*send)(I3CTarget *s, const uint8_t *data, uint32_t num_to_send, + uint32_t *num_sent); + /* + * Target to controller. I3C targets are able to terminate reads early, so + * this returns the number of bytes read from the target. + */ + uint32_t (*recv)(I3CTarget *s, uint8_t *data, uint32_t num_to_read); + /* Notify the target of a bus state change. */ + int (*event)(I3CTarget *s, enum I3CEvent event); + /* + * Handle a read CCC transmitted from a controller. + * CCCs are I3C commands that I3C targets support. + * The target can NACK the CCC if it does not support it. + */ + int (*handle_ccc_read)(I3CTarget *s, uint8_t *data, uint32_t
num_to_read,include/hw/i3c/i3c.h new file +8
-0+ uint32_t *num_read); +/* +* Handle a write CCC transmitted from a controller. +* CCCs are I3C commands that I3C targets support. +* The target can NACK the CCC if it does not support it. +*/ +int (*handle_ccc_write)(I3CTarget *s,const uint8_t *data, + uint32_t num_to_send, uint32_t
*num_sent);include/hw/i3c/i3c.h new file +3
-0+ +/* +* Matches and adds the candidate if the address matches the candidate's
include/hw/i3c/i3c.h new file +5
-0+* address. +* Returns true if the address matched, or if this was a broadcast, and +* updates the device list. Otherwise returns false. +*/ + bool (*target_match)(I3CTarget *candidate, uint8_t address, bool
is_read,include/hw/i3c/i3c.h new file +144
-0+ bool broadcast, bool in_entdaa); }; + +struct I3CTarget { +DeviceState qdev; + +uint8_t address; +uint8_t static_address; +uint8_t dcr; +uint8_t bcr; +uint64_t pid; + +/* CCC State tracking. */ +I3CCCC curr_ccc; +uint8_t ccc_byte_offset; +bool in_ccc; +bool in_test_mode; +}; + +struct I3CNode { +I3CTarget *target; +QLIST_ENTRY (I3CNode) next; +}; + +typedef struct I3CNode I3CNode ; + +typedef QLIST_HEAD(I3CNodeList, I3CNode) I3CNodeList; + +#define TYPE_I3C_BUS "i3c-bus" +OBJECT_DECLARE_TYPE(I3CBus, I3CBusClass, I3C_BUS) + +struct I3CBus { +BusState qbus; + +/* Legacy I2C. */ +I2CBus *i2c_bus; + +I3CNodeList current_devs; +bool broadcast; +uint8_t ccc; +bool in_ccc; +bool in_entdaa; +uint8_t saved_address; +}; + +struct I3CBusClass { +DeviceClass parent; + +/* Handle an incoming IBI request from a target */ +int (*ibi_handle) (I3CBus *bus,uint8_t addr,bool is_recv); +/* Receive data from an IBI request */ +int (*ibi_recv) (I3CBus *bus,uint8_t data); +/* Do anything that needs to be done, since the IBI is finished. */ +int (*ibi_finish) (I3CBus *bus); +}; + +I3CBus *i3c_init_bus (DeviceState *parent,const char *name);I3CBus +*i3c_init_bus_type (const char *type,DeviceState *parent, +const char *name);void +i3c_set_target_address (I3CTarget *dev,uint8_t address);bool +i3c_bus_busy (I3CBus *bus); + +/* +* Start a transfer on an I3C bus. +* If is_recv is known at compile-time (i.e. a device will always be +sending or +* will always be receiving at a certain point), prefer to use +i3c_start_recv or +* i3c_start_send instead. +* +* Returns 0 on success, non-zero on an error. +*/ +int i3c_start_transfer (I3CBus *bus,uint8_t address,bool is_recv); + +/* +* Start a receive transfer on an I3C bus. +* +* Returns 0 on success, non-zero on an error */ int +i3c_start_recv (I3CBus *bus,uint8_t address); + +/* +* Start a send transfer on an I3C bus. +* +* Returns 0 on success, non-zero on an error */ int +i3c_start_send (I3CBus *bus,uint8_t address); + +void i3c_end_transfer (I3CBus *bus); +void i3c_nack (I3CBus *bus); +int i3c_send_byte (I3CBus *bus,uint8_t data);int i3c_send (I3CBus *bus, +const uint8_t *data,uint32_t num_to_send, +uint32_t *num_sent); +/* +* I3C receives can only NACK on a CCC. The target should NACK a CCC it +does not +* support. +*/ +int i3c_recv_byte (I3CBus *bus,uint8_t *data);int i3c_recv (I3CBus +*bus,uint8_t *data,uint32_t num_to_read, +uint32_t *num_read); +bool i3c_scan_bus (I3CBus *bus,uint8_t address,enum I3CEvent event); +int i3c_do_entdaa (I3CBus *bus,uint8_t address,uint64_t *pid,uint8_t *bcr, +uint8_t *dcr); +int i3c_start_device_transfer (I3CTarget *dev,int send_length);bool +i3c_target_match_and_add (I3CBus *bus,I3CTarget *target,uint8_t address, +enum I3CEvent event);int +i3c_target_send_ibi (I3CTarget *t,uint8_t addr,bool is_recv);int +i3c_target_send_ibi_bytes (I3CTarget *t,uint8_t data);int +i3c_target_ibi_finish (I3CTarget *t,uint8_t data); + +/* +* Legacy I2C functions. +* +* These are wrapper for I2C functions that take in an I3C bus instead +of an I2C +* bus. Internally they use the I2C bus (and devices attached to it) +that's a +* part of the I3C bus +*/ +void legacy_i2c_nack (I3CBus *bus); +uint8_t legacy_i2c_recv (I3CBus *bus); +int legacy_i2c_send (I3CBus *bus,uint8_t data);int +legacy_i2c_start_transfer (I3CBus *bus,uint8_t address,bool is_recv); +int legacy_i2c_start_recv (I3CBus *bus,uint8_t address);int +legacy_i2c_start_send (I3CBus *bus,uint8_t address);void +legacy_i2c_end_transfer (I3CBus *bus);I2CSlave +*legacy_i2c_device_create_simple (I3CBus *bus,const char *name, +uint8_t addr); + +/** +* Create an I3C Target. +* +* The target returned from this function still needs to be realized. +*/ +I3CTarget *i3c_target_new (const char *name,uint8_t addr,uint8_t dcr, +uint8_t bcr,uint64_t pid); + +/** +* Create and realize an I3C target. +* +* Create the target, initialize it, put it on the specified I3C bus, +and +* realize it. +*/ +I3CTarget *i3c_target_create_simple (I3CBus *bus,const char *name, + uint8_t addr, uint8_t dcr, uint8_tbcr,
include/hw/i3c/i3c.h new file +7
-1+ uint64_t pid); + +/* Realize and drop the reference count on an I3C target. */ bool +i3c_target_realize_and_unref (I3CTarget *dev,I3CBus *bus,Error +**errp); + +#endif /* QEMU_INCLUDE_HW_I3C_I3C_H_ */ --
Quoted 1 line
2.50.0.rc1.591.g9c95f17f64-goog
Thanks,
Jamin
PATCH 3/19 hw/i3c: Split DesignWare I3C out of Aspeed I3C
In reply to Joe KomlodiThe Aspeed I3C IP block is technically an Aspeed IP block that manages 6 DW I3C controllers.
To help reflect this better and to make it easier for other SoCs to use the DW I3C model, we'll split out the DW portion from the Aspeed portion.
--- hw/arm/Kconfig | 1 + hw/i3c/Kconfig | 3 + hw/i3c/aspeed_i3c.c | 183 +------------------------------- hw/i3c/dw-i3c.c | 204 ++++++++++++++++++++++++++++++++++++ hw/i3c/meson.build | 1 + hw/i3c/trace-events | 6 +- include/hw/i3c/aspeed_i3c.h | 19 +--- include/hw/i3c/dw-i3c.h | 35 +++++++ 8 files changed, 254 insertions(+), 198 deletions(-) create mode 100644 hw/i3c/dw-i3c.c create mode 100644 include/hw/i3c/dw-i3c.h
hw/arm/Kconfig +1 -0
@@ -531,6 +531,7 @@ config ASPEED_SOC select FTGMAC100 select I2C select I3C + select DW_I3C select DPS310 select PCA9552 select SERIAL_MM
hw/i3c/Kconfig +3 -0
@@ -1,2 +1,5 @@ config I3C bool + +config DW_I3C + bool
hw/i3c/aspeed_i3c.c +3 -180
219 lines not on this page · raw message
hw/i3c/dw-i3c.c new file +204 -0
204 lines not on this page · raw message
hw/i3c/meson.build +1 -0
@@ -1,4 +1,5 @@ i3c_ss = ss.source_set() i3c_ss.add(when: 'CONFIG_I3C', if_true: files('core.c')) i3c_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_i3c.c')) +i3c_ss.add(when: 'CONFIG_DW_I3C', if_true: files('dw-i3c.c')) system_ss.add_all(when: 'CONFIG_I3C', if_true: i3c_ss)
hw/i3c/trace-events +4 -2
@@ -3,8 +3,10 @@ # aspeed_i3c.c aspeed_i3c_read(uint64_t offset, uint64_t data) "I3C read: offset 0x%" PRIx64 " data 0x%" PRIx64 aspeed_i3c_write(uint64_t offset, uint64_t data) "I3C write: offset 0x%" PRIx64 " data 0x%" PRIx64 -aspeed_i3c_device_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64 -aspeed_i3c_device_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64 + +# dw-i3c,c +dw_i3c_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64 +dw_i3c_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64 # core.c i3c_target_event(uint8_t address, uint8_t event) "I3C target 0x%" PRIx8 " event 0x%" PRIx8
include/hw/i3c/aspeed_i3c.h +3 -16
@@ -10,29 +10,15 @@ #ifndef ASPEED_I3C_H #define ASPEED_I3C_H +#include "hw/i3c/dw-i3c.h" #include "hw/sysbus.h" #define TYPE_ASPEED_I3C "aspeed.i3c" -#define TYPE_ASPEED_I3C_DEVICE "aspeed.i3c.device" OBJECT_DECLARE_TYPE(AspeedI3CState, AspeedI3CClass, ASPEED_I3C) #define ASPEED_I3C_NR_REGS (0x70 >> 2) -#define ASPEED_I3C_DEVICE_NR_REGS (0x300 >> 2) #define ASPEED_I3C_NR_DEVICES 6 -OBJECT_DECLARE_SIMPLE_TYPE(AspeedI3CDevice, ASPEED_I3C_DEVICE) -typedef struct AspeedI3CDevice { - /* <private> */ - SysBusDevice parent; - - /* <public> */ - MemoryRegion mr; - qemu_irq irq; - - uint8_t id; - uint32_t regs[ASPEED_I3C_DEVICE_NR_REGS]; -} AspeedI3CDevice; - typedef struct AspeedI3CState { /* <private> */ SysBusDevice parent;
@@ -43,6 +29,7 @@ typedef struct AspeedI3CState {qemu_irq irq;uint32_t regs[ASPEED_I3C_NR_REGS ]; - AspeedI3CDevice devices[ASPEED_I3C_NR_DEVICES]; +DWI3C devices[ASPEED_I3C_NR_DEVICES ]; + uint8_t id; } AspeedI3CState;#endif /* ASPEED_I3C_H */
include/hw/i3c/dw-i3c.h new file +35 -0
@@ -0,0 +1,35 @@ +/* +* DesignWare I3C Controller +* +* Copyright (C) 2021 ASPEED Technology Inc. +* Copyright (C) 2025 Google, LLC. +* +* SPDX-License-Identifier: GPL-2.0-or-later +*/ + +#ifndef DW_I3C_H +#define DW_I3C_H + +#include "hw/sysbus.h" + +#define TYPE_DW_I3C "dw.i3c" +OBJECT_DECLARE_SIMPLE_TYPE(DWI3C, DW_I3C) + +#define DW_I3C_NR_REGS (0x300 >> 2) + +typedef struct DWI3C { +/* <private> */ +SysBusDevice parent; + +/* <public> */ +MemoryRegion mr; +qemu_irq irq; + +uint8_t id; +uint32_t regs[DW_I3C_NR_REGS ]; +}DWI3C ; + +/* Extern for other controllers that use DesignWare I3C. */ +extern const VMStateDescription vmstate_dw_i3c; + +#endif /* DW_I3C_H */
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
RE: [PATCH 03/19] hw/i3c: Split DesignWare I3C out of Aspeed I3C
Hi Joe
You moved these registers into the new dw-i3c.h. Is the intention for this file to be shared with other SoCs?
These registers are only used by AST2600. I reviewed AST2700, and it has a different design.
If we want to extend the AST2700 model (for example, HCI, I3C control, and I3C PHY), it seems that dw-i3c.c cannot be reused for AST2700.
Is your goal simply to make aspeed_i3c.c more readable and cleaner, or do you expect dw-i3c.c to be reusable by other SoCs?
Thanks-Jamin
Quoted 596 lines
Subject: [PATCH 03/19] hw/i3c: Split DesignWare I3C out of Aspeed I3C
The Aspeed I3C IP block is technically an Aspeed IP block that manages 6 DW I3C controllers.
To help reflect this better and to make it easier for other SoCs to use the DW I3C model, we'll split out the DW portion from the Aspeed portion.
Signed-off-by Joe Komlodi <[email protected]>--- hw/arm/Kconfig | 1 + hw/i3c/Kconfig | 3 + hw/i3c/aspeed_i3c.c | 183 +------------------------------- hw/i3c/dw-i3c.c | 204 ++++++++++++++++++++++++++++++++++++ hw/i3c/meson.build | 1 + hw/i3c/trace-events | 6 +- include/hw/i3c/aspeed_i3c.h | 19 +--- include/hw/i3c/dw-i3c.h | 35 +++++++ 8 files changed, 254 insertions(+), 198 deletions(-) create mode 100644
hw/i3c/dw-i3c.ccreate mode 100644include/hw/i3c/dw-i3c.hhw/arm/Kconfig index 427d0f0271..53d62cd08d renamed from hw/arm/Kconfig +0
-0100644
hw/arm/Kconfig +1
-0@@ -531,6 +531,7 @@ config ASPEED_SOC select FTGMAC100 select I2C select I3C + select DW_I3C select DPS310 select PCA9552 select SERIAL_MMhw/i3c/Kconfig index e07fe445c6..ecec77d6fc renamed from hw/i3c/Kconfig +0
-0100644
hw/i3c/Kconfig +3
-0@@ -1,2 +1,5 @@ config I3C bool + +config DW_I3C + boolhw/i3c/aspeed_i3c.c index renamed from hw/i3c/aspeed_i3c.c +0
-0
e56822f928..cb0332828c100644hw/i3c/aspeed_i3c.c +1
-108@@ -2,6 +2,7 @@* ASPEED I3C Controller * * Copyright (C) 2021 ASPEED Technology Inc. +* Copyright (C) 2025 Google, LLC. * * This code is licensed under the GPL version 2 or later. See * the COPYING file in the top-level directory. @@ -43,162 +44,6 @@ REG32(I3C6_REG1, 0x64) FIELD(I3C6_REG1, I2C_MODE, 0, 1) FIELD(I3C6_REG1, SA_EN, 15, 1) -/* I3C Device Registers */ -REG32(DEVICE_CTRL, 0x00) -REG32(DEVICE_ADDR, 0x04) -REG32(HW_CAPABILITY, 0x08) -REG32(COMMAND_QUEUE_PORT, 0x0c) -REG32(RESPONSE_QUEUE_PORT, 0x10) -REG32(RX_TX_DATA_PORT, 0x14) -REG32(IBI_QUEUE_STATUS, 0x18) -REG32(IBI_QUEUE_DATA, 0x18) -REG32(QUEUE_THLD_CTRL, 0x1c) -REG32(DATA_BUFFER_THLD_CTRL, 0x20) -REG32(IBI_QUEUE_CTRL, 0x24) -REG32(IBI_MR_REQ_REJECT, 0x2c) -REG32(IBI_SIR_REQ_REJECT, 0x30) -REG32(RESET_CTRL, 0x34) -REG32(SLV_EVENT_CTRL, 0x38) -REG32(INTR_STATUS, 0x3c) -REG32(INTR_STATUS_EN, 0x40) -REG32(INTR_SIGNAL_EN, 0x44) -REG32(INTR_FORCE, 0x48) -REG32(QUEUE_STATUS_LEVEL, 0x4c) -REG32(DATA_BUFFER_STATUS_LEVEL, 0x50) -REG32(PRESENT_STATE, 0x54) -REG32(CCC_DEVICE_STATUS, 0x58) -REG32(DEVICE_ADDR_TABLE_POINTER, 0x5c) - FIELD(DEVICE_ADDR_TABLE_POINTER, DEPTH, 16, 16) - FIELD(DEVICE_ADDR_TABLE_POINTER, ADDR, 0, 16) -REG32(DEV_CHAR_TABLE_POINTER, 0x60) -REG32(VENDOR_SPECIFIC_REG_POINTER, 0x6c) -REG32(SLV_MIPI_PID_VALUE, 0x70) -REG32(SLV_PID_VALUE, 0x74) -REG32(SLV_CHAR_CTRL, 0x78) -REG32(SLV_MAX_LEN, 0x7c) -REG32(MAX_READ_TURNAROUND, 0x80) -REG32(MAX_DATA_SPEED, 0x84) -REG32(SLV_DEBUG_STATUS, 0x88) -REG32(SLV_INTR_REQ, 0x8c) -REG32(DEVICE_CTRL_EXTENDED, 0xb0) -REG32(SCL_I3C_OD_TIMING, 0xb4) -REG32(SCL_I3C_PP_TIMING, 0xb8) -REG32(SCL_I2C_FM_TIMING, 0xbc) -REG32(SCL_I2C_FMP_TIMING, 0xc0) -REG32(SCL_EXT_LCNT_TIMING, 0xc8) -REG32(SCL_EXT_TERMN_LCNT_TIMING, 0xcc) -REG32(BUS_FREE_TIMING, 0xd4) -REG32(BUS_IDLE_TIMING, 0xd8) -REG32(I3C_VER_ID, 0xe0) -REG32(I3C_VER_TYPE, 0xe4) -REG32(EXTENDED_CAPABILITY, 0xe8) -REG32(SLAVE_CONFIG, 0xec) - -static const uint32_t ast2600_i3c_device_resets[ASPEED_I3C_DEVICE_NR_REGS] = { - [R_HW_CAPABILITY ] =0x000e00bf , - [R_QUEUE_THLD_CTRL ] =0x01000101 , - [R_I3C_VER_ID ] =0x3130302a , - [R_I3C_VER_TYPE ] =0x6c633033 , - [R_DEVICE_ADDR_TABLE_POINTER ] =0x00080280 , - [R_DEV_CHAR_TABLE_POINTER ] =0x00020200 , - [A_VENDOR_SPECIFIC_REG_POINTER ] =0x000000b0 , - [R_SLV_MAX_LEN ] =0x00ff00ff , -}; - -static uint64_t aspeed_i3c_device_read (void *opaque,hwaddr offset, -unsigned size) -{ -AspeedI3CDevice *s =ASPEED_I3C_DEVICE (opaque); -uint32_t addr = offset >>2 ; -uint64_t value; - -switch (addr) { -case R_COMMAND_QUEUE_PORT : - value =0 ; -break ; -default : - value = s->regs[addr]; -break ; - } - -trace_aspeed_i3c_device_read (s->id, offset, value); - -return value; -} - -static void aspeed_i3c_device_write (void *opaque,hwaddr offset, -uint64_t value,unsigned size) -{ -AspeedI3CDevice *s =ASPEED_I3C_DEVICE (opaque); -uint32_t addr = offset >>2 ; - -trace_aspeed_i3c_device_write (s->id, offset, value); - -switch (addr) { -case R_HW_CAPABILITY : -case R_RESPONSE_QUEUE_PORT : -case R_IBI_QUEUE_DATA : -case R_QUEUE_STATUS_LEVEL : -case R_PRESENT_STATE : -case R_CCC_DEVICE_STATUS : -case R_DEVICE_ADDR_TABLE_POINTER : -case R_VENDOR_SPECIFIC_REG_POINTER : -case R_SLV_CHAR_CTRL : -case R_SLV_MAX_LEN : -case R_MAX_READ_TURNAROUND : -case R_I3C_VER_ID : -case R_I3C_VER_TYPE : -case R_EXTENDED_CAPABILITY : -qemu_log_mask (LOG_GUEST_ERROR , - "%s: write to readonly register[0x%02"
HWADDR_PRIxhw/i3c/aspeed_i3c.c +0
-19-"] = 0x%08" PRIx64"\n" , - __func__, offset, value); -break ; -case R_RX_TX_DATA_PORT : -break ; -case R_RESET_CTRL : -break ; -default : - s->regs[addr] = value; -break ; - } -} - -static const VMStateDescription aspeed_i3c_device_vmstate = { - .name =TYPE_ASPEED_I3C , - .version_id =1 , - .minimum_version_id =1 , - .fields = (const VMStateField []){ - VMSTATE_UINT32_ARRAY(regs, AspeedI3CDevice,
ASPEED_I3C_DEVICE_NR_REGS),hw/i3c/aspeed_i3c.c +0
-19- VMSTATE_END_OF_LIST(), - } -}; - -static const MemoryRegionOps aspeed_i3c_device_ops = { - .read = aspeed_i3c_device_read, - .write = aspeed_i3c_device_write, - .endianness =DEVICE_LITTLE_ENDIAN , -}; - -static void aspeed_i3c_device_reset(DeviceState *dev) -{ -AspeedI3CDevice *s =ASPEED_I3C_DEVICE (dev); - -memcpy (s->regs, ast2600_i3c_device_resets,sizeof (s->regs)); -} - -static void aspeed_i3c_device_realize(DeviceState *dev, Error **errp) -{ -AspeedI3CDevice *s =ASPEED_I3C_DEVICE (dev); - g_autofree char *name = g_strdup_printf(TYPE_ASPEED_I3C_DEVICE".%d",
hw/i3c/aspeed_i3c.c +0
-6- s->id); - -sysbus_init_irq (SYS_BUS_DEVICE (dev), &s->irq); - - memory_region_init_io(&s->mr, OBJECT(s), &aspeed_i3c_device_ops, - s, name, ASPEED_I3C_DEVICE_NR_REGS <<2);
hw/i3c/aspeed_i3c.c +0
-2-} -static uint64_t aspeed_i3c_read (void *opaque,hwaddr addr,unsigned int size){ AspeedI3CState *s = ASPEED_I3C(opaque); @@ -275,7 +120,7 @@ staticvoid
aspeed_i3c_instance_init(Object *obj)for (i = 0; i < ASPEED_I3C_NR_DEVICES; ++i) { object_initialize_child(obj, "device[*]", &s->devices[i],hw/i3c/aspeed_i3c.c +1
-22- TYPE_ASPEED_I3C_DEVICE); + TYPE_DW_I3C); } }@@ -323,27 +168,6 @@ static void aspeed_i3c_realize(DeviceState *dev, Error **errp) } -static const Property aspeed_i3c_device_properties[] = { -DEFINE_PROP_UINT8 ("device-id" , AspeedI3CDevice, id,0 ), -}; - -static void aspeed_i3c_device_class_init (ObjectClass *klass,const void *data) -{ -DeviceClass *dc =DEVICE_CLASS (klass); - - dc->desc ="Aspeed I3C Device" ; - dc->realize = aspeed_i3c_device_realize; -device_class_set_legacy_reset (dc, aspeed_i3c_device_reset); -device_class_set_props (dc, aspeed_i3c_device_properties); -} - -static const TypeInfo aspeed_i3c_device_info = { - .name =TYPE_ASPEED_I3C_DEVICE , - .parent =TYPE_SYS_BUS_DEVICE , - .instance_size =sizeof (AspeedI3CDevice), - .class_init = aspeed_i3c_device_class_init, -}; -static const VMStateDescription vmstate_aspeed_i3c = { .name =TYPE_ASPEED_I3C ,.version_id = 1,hw/i3c/aspeed_i3c.c +0
-1@@ -351,7 +175,7 @@ static const VMStateDescription vmstate_aspeed_i3c = { .fields = (const VMStateField[]) { VMSTATE_UINT32_ARRAY(regs, AspeedI3CState, ASPEED_I3C_NR_REGS), VMSTATE_STRUCT_ARRAY(devices, AspeedI3CState, ASPEED_I3C_NR_DEVICES, 1, - aspeed_i3c_device_vmstate,AspeedI3CDevice),
hw/i3c/aspeed_i3c.c +1
-1+ vmstate_dw_i3c, DWI3C), VMSTATE_END_OF_LIST(), } };@@ -376,7 +200,6 @@ static const TypeInfo aspeed_i3c_info = {static void aspeed_i3c_register_types (void ) { -type_register_static (&aspeed_i3c_device_info);type_register_static (&aspeed_i3c_info); }hw/i3c/dw-i3c.c new file mode 100644 index renamed from hw/i3c/dw-i3c.c +0
-00000000000..4b1a3f3f07
hw/i3c/dw-i3c.c new file +124
-0@@ -0,0 +1,204 @@ +/* +* DesignWare I3C Controller +* +* Copyright (C) 2021 ASPEED Technology Inc. +* Copyright (C) 2025 Google, LLC +* +* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "qemu/error-report.h" +#include "hw/i3c/i3c.h" +#include "hw/i3c/dw-i3c.h" +#include "hw/registerfields.h" +#include "hw/qdev-properties.h" +#include "qapi/error.h" +#include "migration/vmstate.h" +#include "trace.h" + +REG32(DEVICE_CTRL, 0x00) +REG32(DEVICE_ADDR, 0x04) +REG32(HW_CAPABILITY, 0x08) +REG32(COMMAND_QUEUE_PORT, 0x0c) +REG32(RESPONSE_QUEUE_PORT, 0x10) +REG32(RX_TX_DATA_PORT, 0x14) +REG32(IBI_QUEUE_STATUS, 0x18) +REG32(IBI_QUEUE_DATA, 0x18) +REG32(QUEUE_THLD_CTRL, 0x1c) +REG32(DATA_BUFFER_THLD_CTRL, 0x20) +REG32(IBI_QUEUE_CTRL, 0x24) +REG32(IBI_MR_REQ_REJECT, 0x2c) +REG32(IBI_SIR_REQ_REJECT, 0x30) +REG32(RESET_CTRL, 0x34) +REG32(SLV_EVENT_CTRL, 0x38) +REG32(INTR_STATUS, 0x3c) +REG32(INTR_STATUS_EN, 0x40) +REG32(INTR_SIGNAL_EN, 0x44) +REG32(INTR_FORCE, 0x48) +REG32(QUEUE_STATUS_LEVEL, 0x4c) +REG32(DATA_BUFFER_STATUS_LEVEL, 0x50) +REG32(PRESENT_STATE, 0x54) +REG32(CCC_DEVICE_STATUS, 0x58) +REG32(DEVICE_ADDR_TABLE_POINTER, 0x5c) + FIELD(DEVICE_ADDR_TABLE_POINTER, DEPTH, 16, 16) + FIELD(DEVICE_ADDR_TABLE_POINTER, ADDR, 0, 16) +REG32(DEV_CHAR_TABLE_POINTER, 0x60) +REG32(VENDOR_SPECIFIC_REG_POINTER, 0x6c) +REG32(SLV_MIPI_PID_VALUE, 0x70) +REG32(SLV_PID_VALUE, 0x74) +REG32(SLV_CHAR_CTRL, 0x78) +REG32(SLV_MAX_LEN, 0x7c) +REG32(MAX_READ_TURNAROUND, 0x80) +REG32(MAX_DATA_SPEED, 0x84) +REG32(SLV_DEBUG_STATUS, 0x88) +REG32(SLV_INTR_REQ, 0x8c) +REG32(DEVICE_CTRL_EXTENDED, 0xb0) +REG32(SCL_I3C_OD_TIMING, 0xb4) +REG32(SCL_I3C_PP_TIMING, 0xb8) +REG32(SCL_I2C_FM_TIMING, 0xbc) +REG32(SCL_I2C_FMP_TIMING, 0xc0) +REG32(SCL_EXT_LCNT_TIMING, 0xc8) +REG32(SCL_EXT_TERMN_LCNT_TIMING, 0xcc) +REG32(BUS_FREE_TIMING, 0xd4) +REG32(BUS_IDLE_TIMING, 0xd8) +REG32(I3C_VER_ID, 0xe0) +REG32(I3C_VER_TYPE, 0xe4) +REG32(EXTENDED_CAPABILITY, 0xe8) +REG32(SLAVE_CONFIG, 0xec) + +static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS ] = { + [R_HW_CAPABILITY ] =0x000e00bf , + [R_QUEUE_THLD_CTRL ] =0x01000101 , + [R_I3C_VER_ID ] =0x3130302a , + [R_I3C_VER_TYPE ] =0x6c633033 , + [R_DEVICE_ADDR_TABLE_POINTER ] =0x00080280 , + [R_DEV_CHAR_TABLE_POINTER ] =0x00020200 , + [A_VENDOR_SPECIFIC_REG_POINTER ] =0x000000b0 , + [R_SLV_MAX_LEN ] =0x00ff00ff , +}; + +static uint64_t dw_i3c_read (void *opaque,hwaddr offset,unsigned size) +{ +DWI3C *s =DW_I3C (opaque); +uint32_t addr = offset >>2 ; +uint64_t value; + +switch (addr) { +case R_COMMAND_QUEUE_PORT : + value =0 ; +break ; +default : + value = s->regs[addr]; +break ; + } + +trace_dw_i3c_read (s->id, offset, value); + +return value; +} + +static void dw_i3c_write (void *opaque,hwaddr offset,uint64_t value, +unsigned size) { +DWI3C *s =DW_I3C (opaque); +uint32_t addr = offset >>2 ; + +trace_dw_i3c_write (s->id, offset, value); + +switch (addr) { +case R_HW_CAPABILITY : +case R_RESPONSE_QUEUE_PORT : +case R_IBI_QUEUE_DATA : +case R_QUEUE_STATUS_LEVEL : +case R_PRESENT_STATE : +case R_CCC_DEVICE_STATUS : +case R_DEVICE_ADDR_TABLE_POINTER : +case R_VENDOR_SPECIFIC_REG_POINTER : +case R_SLV_CHAR_CTRL : +case R_SLV_MAX_LEN : +case R_MAX_READ_TURNAROUND : +case R_I3C_VER_ID : +case R_I3C_VER_TYPE : +case R_EXTENDED_CAPABILITY : +qemu_log_mask (LOG_GUEST_ERROR , + "%s: write to readonly register[0x%02"
HWADDR_PRIxhw/i3c/dw-i3c.c new file +69
-0+"] = 0x%08" PRIx64"\n" , + __func__, offset, value); +break ; +case R_RX_TX_DATA_PORT : +break ; +case R_RESET_CTRL : +break ; +default : + s->regs[addr] = value; +break ; + } +} + +const VMStateDescription vmstate_dw_i3c = { + .name =TYPE_DW_I3C , + .version_id =1 , + .minimum_version_id =1 , + .fields = (VMStateField []){ +VMSTATE_UINT32_ARRAY (regs,DWI3C ,DW_I3C_NR_REGS ), +VMSTATE_END_OF_LIST (), + } +}; + +static const MemoryRegionOps dw_i3c_ops = { + .read = dw_i3c_read, + .write = dw_i3c_write, + .endianness =DEVICE_LITTLE_ENDIAN , }; + +static void dw_i3c_reset_enter (Object *obj,ResetType type) { +DWI3C *s =DW_I3C (obj); + +memcpy (s->regs, dw_i3c_resets,sizeof (s->regs)); } + +static void dw_i3c_realize (DeviceState *dev,Error **errp) { +DWI3C *s =DW_I3C (dev); + g_autofree char *name = g_strdup_printf(TYPE_DW_I3C ".%d", s->id); + +sysbus_init_irq (SYS_BUS_DEVICE (dev), &s->irq); + +memory_region_init_io (&s->mr,OBJECT (s), &dw_i3c_ops, s, name, +DW_I3C_NR_REGS <<2 ); +sysbus_init_mmio (SYS_BUS_DEVICE (dev), &s->mr); } + +static const Property dw_i3c_properties[] = { +DEFINE_PROP_UINT8 ("device-id" ,DWI3C , id,0 ), }; + +static void dw_i3c_class_init (ObjectClass *klass,const void *data) { +DeviceClass *dc =DEVICE_CLASS (klass); +ResettableClass *rc =RESETTABLE_CLASS (klass); + + rc->phases.enter = dw_i3c_reset_enter; + + dc->desc ="DesignWare I3C Controller" ; + dc->realize = dw_i3c_realize; + dc->vmsd = &vmstate_dw_i3c; +device_class_set_props (dc, dw_i3c_properties); } + +static const TypeInfo dw_i3c_info = { + .name =TYPE_DW_I3C , + .parent =TYPE_SYS_BUS_DEVICE , + .instance_size =sizeof (DWI3C ), + .class_init = dw_i3c_class_init, +}; + +static void dw_i3c_register_types (void ) { +type_register_static (&dw_i3c_info); +} + +type_init (dw_i3c_register_types);hw/i3c/meson.build index renamed from hw/i3c/meson.build +0
-0
fb127613fe..83d75e7d5c100644hw/i3c/meson.build +1
-0@@ -1,4 +1,5 @@ i3c_ss = ss.source_set() i3c_ss.add(when: 'CONFIG_I3C', if_true: files('core.c')) i3c_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_i3c.c')) +i3c_ss.add(when: 'CONFIG_DW_I3C', if_true: files('dw-i3c.c')) system_ss.add_all(when: 'CONFIG_I3C', if_true: i3c_ss) diff --gita/hw/i3c/trace-events b/hw/i3c/trace-events index
cdf7cb07f6..2d944387db100644hw/i3c/trace-events +0
-0@@ -3,8 +3,10 @@ # aspeed_i3c.c aspeed_i3c_read(uint64_t offset, uint64_t data) "I3C read: offset 0x%" PRIx64" data 0x%" PRIx64
aspeed_i3c_write(uint64_t offset, uint64_t data)"I3C
write: offset 0x%" PRIx64 " data 0x%" PRIx64 -aspeed_i3c_device_read(uint32_t deviceid,uint64_toffset,uint64_tdata) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64 -aspeed_i3c_device_write(uint32_t deviceid,uint64_toffset,uint64_tdata) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64hw/i3c/trace-events +6
-0+ +# dw-i3c,c +dw_i3c_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C +Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64 +dw_i3c_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C +Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64 # core.c i3c_target_event(uint8_t address, uint8_t event) "I3C target 0x%" PRIx8 "event 0x%" PRIx8 diff --git
a/include/hw/i3c/aspeed_i3c.hb/include/hw/i3c/aspeed_i3c.hindex39679dfa1a..793ee111cb100644include/hw/i3c/aspeed_i3c.h +1
-2@@ -10,29 +10,15 @@#ifndef ASPEED_I3C_H #define ASPEED_I3C_H +#include "hw/i3c/dw-i3c.h" #include "hw/sysbus.h" #define TYPE_ASPEED_I3C "aspeed.i3c" -#define TYPE_ASPEED_I3C_DEVICE "aspeed.i3c.device" OBJECT_DECLARE_TYPE(AspeedI3CState, AspeedI3CClass, ASPEED_I3C)#define ASPEED_I3C_NR_REGS (0x70 >> 2) -#define ASPEED_I3C_DEVICE_NR_REGS (0x300 >> 2) #define
ASPEED_I3C_NR_DEVICES6include/hw/i3c/aspeed_i3c.h +2
-14-OBJECT_DECLARE_SIMPLE_TYPE(AspeedI3CDevice, ASPEED_I3C_DEVICE) -typedef struct AspeedI3CDevice { -/* <private> */ -SysBusDevice parent; - -/* <public> */ -MemoryRegion mr; -qemu_irq irq; - -uint8_t id; -uint32_t regs[ASPEED_I3C_DEVICE_NR_REGS ]; -}AspeedI3CDevice ; - typedef struct AspeedI3CState { /* <private> */ SysBusDevice parent;@@ -43,6 +29,7 @@ typedef struct AspeedI3CState {qemu_irq irq;uint32_t regs[ASPEED_I3C_NR_REGS ]; - AspeedI3CDevice devices[ASPEED_I3C_NR_DEVICES]; +DWI3C devices[ASPEED_I3C_NR_DEVICES ]; + uint8_t id; } AspeedI3CState;#endif /* ASPEED_I3C_H */ include/hw/i3c/dw-i3c.h new file mode renamed from include/hw/i3c/dw-i3c.h +0
-0100644 index 0000000000..214f5ffed2
include/hw/i3c/dw-i3c.h new file +34
-1@@ -0,0 +1,35 @@ +/* +* DesignWare I3C Controller +* +* Copyright (C) 2021 ASPEED Technology Inc. +* Copyright (C) 2025 Google, LLC. +* +* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef DW_I3C_H +#define DW_I3C_H + +#include "hw/sysbus.h" + +#define TYPE_DW_I3C "dw.i3c" +OBJECT_DECLARE_SIMPLE_TYPE(DWI3C, DW_I3C) + +#define DW_I3C_NR_REGS (0x300 >> 2) + +typedef struct DWI3C { +/* <private> */ +SysBusDevice parent; + +/* <public> */ +MemoryRegion mr; +qemu_irq irq; + +uint8_t id; +uint32_t regs[DW_I3C_NR_REGS ]; +}DWI3C ; + +/* Extern for other controllers that use DesignWare I3C. */ extern +const VMStateDescription vmstate_dw_i3c; + +#endif /* DW_I3C_H */ --2.50.0.rc1.591.g9c95f17f64-goog
PATCH 4/19 hw/i3c/dw-i3c: Add more register fields
In reply to Joe KomlodiAdds the rest of the Designware register fields.
--- hw/i3c/dw-i3c.c | 216 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 216 insertions(+)
hw/i3c/dw-i3c.c +216 -0
@@ -19,54 +19,270 @@#include "trace.h" REG32(DEVICE_CTRL, 0x00) + FIELD(DEVICE_CTRL, I3C_BROADCAST_ADDR_INC, 0, 1) + FIELD(DEVICE_CTRL, I2C_SLAVE_PRESENT, 7, 1) + FIELD(DEVICE_CTRL, HOT_JOIN_ACK_NACK_CTRL, 8, 1) + FIELD(DEVICE_CTRL, IDLE_CNT_MULTIPLIER, 24, 2) + FIELD(DEVICE_CTRL, SLV_ADAPT_TO_I2C_I3C_MODE, 27, 1) + FIELD(DEVICE_CTRL, DMA_HANDSHAKE_EN, 28, 1) + FIELD(DEVICE_CTRL, I3C_ABORT, 29, 1) + FIELD(DEVICE_CTRL, I3C_RESUME, 30, 1) + FIELD(DEVICE_CTRL, I3C_EN, 31, 1) REG32(DEVICE_ADDR, 0x04) + FIELD(DEVICE_ADDR, STATIC_ADDR, 0, 7) + FIELD(DEVICE_ADDR, STATIC_ADDR_VALID, 15, 1) + FIELD(DEVICE_ADDR, DYNAMIC_ADDR, 16, 7) + FIELD(DEVICE_ADDR, DYNAMIC_ADDR_VALID, 15, 1) REG32(HW_CAPABILITY, 0x08) + FIELD(HW_CAPABILITY, DEVICE_ROLE_CONFIG, 0, 2) + FIELD(HW_CAPABILITY, HDR_DDR, 3, 1) + FIELD(HW_CAPABILITY, HDR_TS, 4, 1) REG32(COMMAND_QUEUE_PORT, 0x0c) +FIELD (COMMAND_QUEUE_PORT ,CMD_ATTR ,0 ,3 ) + /* Transfer command structure */ + FIELD(COMMAND_QUEUE_PORT, TID, 3, 4) + FIELD(COMMAND_QUEUE_PORT, CMD, 7, 8) + FIELD(COMMAND_QUEUE_PORT, CP, 15, 1) + FIELD(COMMAND_QUEUE_PORT, DEV_INDEX, 16, 5) + FIELD(COMMAND_QUEUE_PORT, SPEED, 21, 3) + FIELD(COMMAND_QUEUE_PORT, ROC, 26, 1) + FIELD(COMMAND_QUEUE_PORT, SDAP, 27, 1) + FIELD(COMMAND_QUEUE_PORT, RNW, 28, 1) + FIELD(COMMAND_QUEUE_PORT, TOC, 30, 1) +FIELD (COMMAND_QUEUE_PORT ,PEC ,31 ,1 ) + /* Transfer argument data structure */ + FIELD(COMMAND_QUEUE_PORT, DB, 8, 8) +FIELD (COMMAND_QUEUE_PORT ,DL ,16 ,16 ) + /* Short data argument data structure */ + FIELD(COMMAND_QUEUE_PORT, BYTE_STRB, 3, 3) + FIELD(COMMAND_QUEUE_PORT, BYTE0, 8, 8) + FIELD(COMMAND_QUEUE_PORT, BYTE1, 16, 8) +FIELD (COMMAND_QUEUE_PORT ,BYTE2 ,24 ,8 ) +/* Address assignment command structure */ +/* +* bits 3..21 and 26..31 are the same as the transfer command structure, or +* marked as reserved. + */ + FIELD(COMMAND_QUEUE_PORT, DEV_COUNT, 21, 3) REG32(RESPONSE_QUEUE_PORT, 0x10) + FIELD(RESPONSE_QUEUE_PORT, DL, 0, 16) + FIELD(RESPONSE_QUEUE_PORT, CCCT, 16, 8) + FIELD(RESPONSE_QUEUE_PORT, TID, 24, 4) + FIELD(RESPONSE_QUEUE_PORT, ERR_STATUS, 28, 4) REG32(RX_TX_DATA_PORT, 0x14) REG32(IBI_QUEUE_STATUS, 0x18) + FIELD(IBI_QUEUE_STATUS, IBI_DATA_LEN, 0, 8) + FIELD(IBI_QUEUE_STATUS, IBI_ID, 8, 8) + FIELD(IBI_QUEUE_STATUS, LAST_STATUS, 24, 1) + FIELD(IBI_QUEUE_STATUS, ERROR, 30, 1) + FIELD(IBI_QUEUE_STATUS, IBI_STATUS, 31, 1) REG32(IBI_QUEUE_DATA, 0x18) REG32(QUEUE_THLD_CTRL, 0x1c) +FIELD (QUEUE_THLD_CTRL ,CMD_BUF_EMPTY_THLD ,0 ,8 ); +FIELD (QUEUE_THLD_CTRL ,RESP_BUF_THLD ,8 ,8 ); +FIELD (QUEUE_THLD_CTRL ,IBI_DATA_THLD ,16 ,8 ); +FIELD (QUEUE_THLD_CTRL ,IBI_STATUS_THLD ,24 ,8 ); REG32(DATA_BUFFER_THLD_CTRL, 0x20) + FIELD(DATA_BUFFER_THLD_CTRL, TX_BUF_THLD, 0, 3) + FIELD(DATA_BUFFER_THLD_CTRL, RX_BUF_THLD, 10, 3) + FIELD(DATA_BUFFER_THLD_CTRL, TX_START_THLD, 16, 3) + FIELD(DATA_BUFFER_THLD_CTRL, RX_START_THLD, 24, 3) REG32(IBI_QUEUE_CTRL, 0x24) + FIELD(IBI_QUEUE_CTRL, NOTIFY_REJECTED_HOT_JOIN, 0, 1) + FIELD(IBI_QUEUE_CTRL, NOTIFY_REJECTED_MASTER_REQ, 1, 1) + FIELD(IBI_QUEUE_CTRL, NOTIFY_REJECTED_SLAVE_IRQ, 3, 1) REG32(IBI_MR_REQ_REJECT, 0x2c) REG32(IBI_SIR_REQ_REJECT, 0x30) REG32(RESET_CTRL, 0x34) + FIELD(RESET_CTRL, CORE_RESET, 0, 1) + FIELD(RESET_CTRL, CMD_QUEUE_RESET, 1, 1) + FIELD(RESET_CTRL, RESP_QUEUE_RESET, 2, 1) + FIELD(RESET_CTRL, TX_BUF_RESET, 3, 1) + FIELD(RESET_CTRL, RX_BUF_RESET, 4, 1) + FIELD(RESET_CTRL, IBI_QUEUE_RESET, 5, 1) REG32(SLV_EVENT_CTRL, 0x38) + FIELD(SLV_EVENT_CTRL, SLV_INTERRUPT, 0, 1) + FIELD(SLV_EVENT_CTRL, MASTER_INTERRUPT, 1, 1) + FIELD(SLV_EVENT_CTRL, HOT_JOIN_INTERRUPT, 3, 1) + FIELD(SLV_EVENT_CTRL, ACTIVITY_STATE, 4, 2) + FIELD(SLV_EVENT_CTRL, MRL_UPDATED, 6, 1) + FIELD(SLV_EVENT_CTRL, MWL_UPDATED, 7, 1) REG32(INTR_STATUS, 0x3c) + FIELD(INTR_STATUS, TX_THLD, 0, 1) + FIELD(INTR_STATUS, RX_THLD, 1, 1) + FIELD(INTR_STATUS, IBI_THLD, 2, 1) + FIELD(INTR_STATUS, CMD_QUEUE_RDY, 3, 1) + FIELD(INTR_STATUS, RESP_RDY, 4, 1) + FIELD(INTR_STATUS, TRANSFER_ABORT, 5, 1) + FIELD(INTR_STATUS, CCC_UPDATED, 6, 1) + FIELD(INTR_STATUS, DYN_ADDR_ASSGN, 8, 1) + FIELD(INTR_STATUS, TRANSFER_ERR, 9, 1) + FIELD(INTR_STATUS, DEFSLV, 10, 1) + FIELD(INTR_STATUS, READ_REQ_RECV, 11, 1) + FIELD(INTR_STATUS, IBI_UPDATED, 12, 1) + FIELD(INTR_STATUS, BUSOWNER_UPDATED, 13, 1) REG32(INTR_STATUS_EN, 0x40) + FIELD(INTR_STATUS_EN, TX_THLD, 0, 1) + FIELD(INTR_STATUS_EN, RX_THLD, 1, 1) + FIELD(INTR_STATUS_EN, IBI_THLD, 2, 1) + FIELD(INTR_STATUS_EN, CMD_QUEUE_RDY, 3, 1) + FIELD(INTR_STATUS_EN, RESP_RDY, 4, 1) + FIELD(INTR_STATUS_EN, TRANSFER_ABORT, 5, 1) + FIELD(INTR_STATUS_EN, CCC_UPDATED, 6, 1) + FIELD(INTR_STATUS_EN, DYN_ADDR_ASSGN, 8, 1) + FIELD(INTR_STATUS_EN, TRANSFER_ERR, 9, 1) + FIELD(INTR_STATUS_EN, DEFSLV, 10, 1) + FIELD(INTR_STATUS_EN, READ_REQ_RECV, 11, 1) + FIELD(INTR_STATUS_EN, IBI_UPDATED, 12, 1) + FIELD(INTR_STATUS_EN, BUSOWNER_UPDATED, 13, 1) REG32(INTR_SIGNAL_EN, 0x44) + FIELD(INTR_SIGNAL_EN, TX_THLD, 0, 1) + FIELD(INTR_SIGNAL_EN, RX_THLD, 1, 1) + FIELD(INTR_SIGNAL_EN, IBI_THLD, 2, 1) + FIELD(INTR_SIGNAL_EN, CMD_QUEUE_RDY, 3, 1) + FIELD(INTR_SIGNAL_EN, RESP_RDY, 4, 1) + FIELD(INTR_SIGNAL_EN, TRANSFER_ABORT, 5, 1) + FIELD(INTR_SIGNAL_EN, CCC_UPDATED, 6, 1) + FIELD(INTR_SIGNAL_EN, DYN_ADDR_ASSGN, 8, 1) + FIELD(INTR_SIGNAL_EN, TRANSFER_ERR, 9, 1) + FIELD(INTR_SIGNAL_EN, DEFSLV, 10, 1) + FIELD(INTR_SIGNAL_EN, READ_REQ_RECV, 11, 1) + FIELD(INTR_SIGNAL_EN, IBI_UPDATED, 12, 1) + FIELD(INTR_SIGNAL_EN, BUSOWNER_UPDATED, 13, 1) REG32(INTR_FORCE, 0x48) + FIELD(INTR_FORCE, TX_THLD, 0, 1) + FIELD(INTR_FORCE, RX_THLD, 1, 1) + FIELD(INTR_FORCE, IBI_THLD, 2, 1) + FIELD(INTR_FORCE, CMD_QUEUE_RDY, 3, 1) + FIELD(INTR_FORCE, RESP_RDY, 4, 1) + FIELD(INTR_FORCE, TRANSFER_ABORT, 5, 1) + FIELD(INTR_FORCE, CCC_UPDATED, 6, 1) + FIELD(INTR_FORCE, DYN_ADDR_ASSGN, 8, 1) + FIELD(INTR_FORCE, TRANSFER_ERR, 9, 1) + FIELD(INTR_FORCE, DEFSLV, 10, 1) + FIELD(INTR_FORCE, READ_REQ_RECV, 11, 1) + FIELD(INTR_FORCE, IBI_UPDATED, 12, 1) + FIELD(INTR_FORCE, BUSOWNER_UPDATED, 13, 1) REG32(QUEUE_STATUS_LEVEL, 0x4c) + FIELD(QUEUE_STATUS_LEVEL, CMD_QUEUE_EMPTY_LOC, 0, 8) + FIELD(QUEUE_STATUS_LEVEL, RESP_BUF_BLR, 8, 8) + FIELD(QUEUE_STATUS_LEVEL, IBI_BUF_BLR, 16, 8) + FIELD(QUEUE_STATUS_LEVEL, IBI_STATUS_CNT, 24, 5) REG32(DATA_BUFFER_STATUS_LEVEL, 0x50) + FIELD(DATA_BUFFER_STATUS_LEVEL, TX_BUF_EMPTY_LOC, 0, 8) + FIELD(DATA_BUFFER_STATUS_LEVEL, RX_BUF_BLR, 16, 8) REG32(PRESENT_STATE, 0x54) + FIELD(PRESENT_STATE, SCL_LINE_SIGNAL_LEVEL, 0, 1) + FIELD(PRESENT_STATE, SDA_LINE_SIGNAL_LEVEL, 1, 1) + FIELD(PRESENT_STATE, CURRENT_MASTER, 2, 1) + FIELD(PRESENT_STATE, CM_TFR_STATUS, 8, 6) + FIELD(PRESENT_STATE, CM_TFR_ST_STATUS, 16, 6) + FIELD(PRESENT_STATE, CMD_TID, 24, 4) REG32(CCC_DEVICE_STATUS, 0x58) + FIELD(CCC_DEVICE_STATUS, PENDING_INTR, 0, 4) + FIELD(CCC_DEVICE_STATUS, PROTOCOL_ERR, 4, 2) + FIELD(CCC_DEVICE_STATUS, ACTIVITY_MODE, 6, 2) + FIELD(CCC_DEVICE_STATUS, UNDER_ERR, 8, 1) + FIELD(CCC_DEVICE_STATUS, SLV_BUSY, 9, 1) + FIELD(CCC_DEVICE_STATUS, OVERFLOW_ERR, 10, 1) + FIELD(CCC_DEVICE_STATUS, DATA_NOT_READY, 11, 1) + FIELD(CCC_DEVICE_STATUS, BUFFER_NOT_AVAIL, 12, 1) REG32(DEVICE_ADDR_TABLE_POINTER, 0x5c) FIELD(DEVICE_ADDR_TABLE_POINTER, DEPTH, 16, 16) FIELD(DEVICE_ADDR_TABLE_POINTER, ADDR, 0, 16) REG32(DEV_CHAR_TABLE_POINTER, 0x60) + FIELD(DEV_CHAR_TABLE_POINTER, P_DEV_CHAR_TABLE_START_ADDR, 0, 12) + FIELD(DEV_CHAR_TABLE_POINTER, DEV_CHAR_TABLE_DEPTH, 12, 7) + FIELD(DEV_CHAR_TABLE_POINTER, PRESENT_DEV_CHAR_TABLE_INDEX, 19, 3) REG32(VENDOR_SPECIFIC_REG_POINTER, 0x6c) + FIELD(VENDOR_SPECIFIC_REG_POINTER, P_VENDOR_REG_START_ADDR, 0, 16) REG32(SLV_MIPI_PID_VALUE, 0x70) REG32(SLV_PID_VALUE, 0x74) + FIELD(SLV_PID_VALUE, SLV_PID_DCR, 0, 12) + FIELD(SLV_PID_VALUE, SLV_INST_ID, 12, 4) + FIELD(SLV_PID_VALUE, SLV_PART_ID, 16, 16) REG32(SLV_CHAR_CTRL, 0x78) + FIELD(SLV_CHAR_CTRL, BCR, 0, 8) + FIELD(SLV_CHAR_CTRL, DCR, 8, 8) + FIELD(SLV_CHAR_CTRL, HDR_CAP, 16, 8) REG32(SLV_MAX_LEN, 0x7c) + FIELD(SLV_MAX_LEN, MWL, 0, 16) + FIELD(SLV_MAX_LEN, MRL, 16, 16) REG32(MAX_READ_TURNAROUND, 0x80) REG32(MAX_DATA_SPEED, 0x84) REG32(SLV_DEBUG_STATUS, 0x88) REG32(SLV_INTR_REQ, 0x8c) + FIELD(SLV_INTR_REQ, SIR, 0, 1) + FIELD(SLV_INTR_REQ, SIR_CTRL, 1, 2) + FIELD(SLV_INTR_REQ, MIR, 3, 1) + FIELD(SLV_INTR_REQ, TS, 4, 1) + FIELD(SLV_INTR_REQ, IBI_STS, 8, 2) + FIELD(SLV_INTR_REQ, MDB, 8, 8) + FIELD(SLV_INTR_REQ, SIR_DATA_LEN, 16, 8) +REG32(SLV_TSX_SYMBL_TIMING, 0x90) + FIELD(SLV_TSX_SYMBL_TIMING, SLV_TSX_SYMBL_CNT, 0, 6) +REG32(SLV_SIR_DATA, 0x94) + FIELD(SLV_SIR_DATA, SIR_DATA_BYTE0, 0, 8) + FIELD(SLV_SIR_DATA, SIR_DATA_BYTE1, 8, 8) + FIELD(SLV_SIR_DATA, SIR_DATA_BYTE2, 16, 8) + FIELD(SLV_SIR_DATA, SIR_DATA_BYTE3, 24, 8) +REG32(SLV_IBI_RESP, 0x98) + FIELD(SLV_IBI_RESP, IBI_STS, 0, 2) + FIELD(SLV_IBI_RESP, SIR_RESP_DATA_LEN, 8, 16) REG32(DEVICE_CTRL_EXTENDED, 0xb0) + FIELD(DEVICE_CTRL_EXTENDED, MODE, 0, 2) + FIELD(DEVICE_CTRL_EXTENDED, REQMST_ACK_CTRL, 3, 1) REG32(SCL_I3C_OD_TIMING, 0xb4) + FIELD(SCL_I3C_OD_TIMING, I3C_OD_LCNT, 0, 8) + FIELD(SCL_I3C_OD_TIMING, I3C_OD_HCNT, 16, 8) REG32(SCL_I3C_PP_TIMING, 0xb8) + FIELD(SCL_I3C_PP_TIMING, I3C_PP_LCNT, 0, 8) + FIELD(SCL_I3C_PP_TIMING, I3C_PP_HCNT, 16, 8) REG32(SCL_I2C_FM_TIMING, 0xbc) REG32(SCL_I2C_FMP_TIMING, 0xc0) + FIELD(SCL_I2C_FMP_TIMING, I2C_FMP_LCNT, 0, 16) + FIELD(SCL_I2C_FMP_TIMING, I2C_FMP_HCNT, 16, 8) REG32(SCL_EXT_LCNT_TIMING, 0xc8) REG32(SCL_EXT_TERMN_LCNT_TIMING, 0xcc) REG32(BUS_FREE_TIMING, 0xd4) REG32(BUS_IDLE_TIMING, 0xd8) + FIELD(BUS_IDLE_TIMING, BUS_IDLE_TIME, 0, 20) REG32(I3C_VER_ID, 0xe0) REG32(I3C_VER_TYPE, 0xe4) REG32(EXTENDED_CAPABILITY, 0xe8) + FIELD(EXTENDED_CAPABILITY, APP_IF_MODE, 0, 2) + FIELD(EXTENDED_CAPABILITY, APP_IF_DATA_WIDTH, 2, 2) + FIELD(EXTENDED_CAPABILITY, OPERATION_MODE, 4, 2) + FIELD(EXTENDED_CAPABILITY, CLK_PERIOD, 8, 6) REG32(SLAVE_CONFIG, 0xec) + FIELD(SLAVE_CONFIG, DMA_EN, 0, 1) + FIELD(SLAVE_CONFIG, HJ_CAP, 0, 1) +FIELD (SLAVE_CONFIG ,CLK_PERIOD ,2 ,14 ) +/* Device characteristic table fields */ +REG32(DEVICE_CHARACTERISTIC_TABLE_LOC1, 0x200) +REG32(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, 0x200) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, DYNAMIC_ADDR, 0, 8) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, DCR, 8, 8) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, BCR, 16, 8) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, STATIC_ADDR, 24, 8) +REG32(DEVICE_CHARACTERISTIC_TABLE_LOC2, 0x204) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC2, MSB_PID, 0, 16) +REG32(DEVICE_CHARACTERISTIC_TABLE_LOC3, 0x208) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC3, DCR, 0, 8) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC3, BCR, 8, 8) +REG32(DEVICE_CHARACTERISTIC_TABLE_LOC4, 0x20c) +FIELD (DEVICE_CHARACTERISTIC_TABLE_LOC4 ,DEV_DYNAMIC_ADDR ,0 ,8 ) +/* Dev addr table fields */ +REG32(DEVICE_ADDR_TABLE_LOC1, 0x280) + FIELD(DEVICE_ADDR_TABLE_LOC1, DEV_STATIC_ADDR, 0, 7) + FIELD(DEVICE_ADDR_TABLE_LOC1, IBI_PEC_EN, 11, 1) + FIELD(DEVICE_ADDR_TABLE_LOC1, IBI_WITH_DATA, 12, 1) + FIELD(DEVICE_ADDR_TABLE_LOC1, SIR_REJECT, 13, 1) + FIELD(DEVICE_ADDR_TABLE_LOC1, MR_REJECT, 14, 1) + FIELD(DEVICE_ADDR_TABLE_LOC1, DEV_DYNAMIC_ADDR, 16, 8) + FIELD(DEVICE_ADDR_TABLE_LOC1, IBI_ADDR_MASK, 24, 2) + FIELD(DEVICE_ADDR_TABLE_LOC1, DEV_NACK_RETRY_CNT, 29, 2) + FIELD(DEVICE_ADDR_TABLE_LOC1, LEGACY_I2C_DEVICE, 31, 1)static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS ] = { [R_HW_CAPABILITY ] =0x000e00bf ,
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
RE: [PATCH 04/19] hw/i3c/dw-i3c: Add more register fields
Quoted 296 lines
Subject: [PATCH 04/19] hw/i3c/dw-i3c: Add more register fields
Adds the rest of the Designware register fields.
Signed-off-by Joe Komlodi <[email protected]>Reviewed-by Patrick Venture <[email protected]>--- hw/i3c/dw-i3c.c | 216 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 216 insertions(+)hw/i3c/dw-i3c.c index 4b1a3f3f07..b252903ea4 renamed from hw/i3c/dw-i3c.c +0
-0100644
hw/i3c/dw-i3c.c +39
-0@@ -19,54 +19,270 @@#include "trace.h" REG32(DEVICE_CTRL, 0x00) + FIELD(DEVICE_CTRL, I3C_BROADCAST_ADDR_INC, 0, 1) + FIELD(DEVICE_CTRL, I2C_SLAVE_PRESENT, 7, 1) + FIELD(DEVICE_CTRL, HOT_JOIN_ACK_NACK_CTRL, 8, 1) + FIELD(DEVICE_CTRL, IDLE_CNT_MULTIPLIER, 24, 2) + FIELD(DEVICE_CTRL, SLV_ADAPT_TO_I2C_I3C_MODE, 27, 1) + FIELD(DEVICE_CTRL, DMA_HANDSHAKE_EN, 28, 1) + FIELD(DEVICE_CTRL, I3C_ABORT, 29, 1) + FIELD(DEVICE_CTRL, I3C_RESUME, 30, 1) + FIELD(DEVICE_CTRL, I3C_EN, 31, 1) REG32(DEVICE_ADDR, 0x04) + FIELD(DEVICE_ADDR, STATIC_ADDR, 0, 7) + FIELD(DEVICE_ADDR, STATIC_ADDR_VALID, 15, 1) + FIELD(DEVICE_ADDR, DYNAMIC_ADDR, 16, 7) + FIELD(DEVICE_ADDR, DYNAMIC_ADDR_VALID, 15, 1) REG32(HW_CAPABILITY, 0x08) + FIELD(HW_CAPABILITY, DEVICE_ROLE_CONFIG, 0, 2) + FIELD(HW_CAPABILITY, HDR_DDR, 3, 1) + FIELD(HW_CAPABILITY, HDR_TS, 4, 1) REG32(COMMAND_QUEUE_PORT, 0x0c) +FIELD (COMMAND_QUEUE_PORT ,CMD_ATTR ,0 ,3 ) + /* Transfer command structure */ + FIELD(COMMAND_QUEUE_PORT, TID, 3, 4) + FIELD(COMMAND_QUEUE_PORT, CMD, 7, 8) + FIELD(COMMAND_QUEUE_PORT, CP, 15, 1) + FIELD(COMMAND_QUEUE_PORT, DEV_INDEX, 16, 5) + FIELD(COMMAND_QUEUE_PORT, SPEED, 21, 3) + FIELD(COMMAND_QUEUE_PORT, ROC, 26, 1) + FIELD(COMMAND_QUEUE_PORT, SDAP, 27, 1) + FIELD(COMMAND_QUEUE_PORT, RNW, 28, 1) + FIELD(COMMAND_QUEUE_PORT, TOC, 30, 1) +FIELD (COMMAND_QUEUE_PORT ,PEC ,31 ,1 ) + /* Transfer argument data structure */ + FIELD(COMMAND_QUEUE_PORT, DB, 8, 8) +FIELD (COMMAND_QUEUE_PORT ,DL ,16 ,16 ) + /* Short data argument data structure */ + FIELD(COMMAND_QUEUE_PORT, BYTE_STRB, 3, 3) + FIELD(COMMAND_QUEUE_PORT, BYTE0, 8, 8) + FIELD(COMMAND_QUEUE_PORT, BYTE1, 16, 8) +FIELD (COMMAND_QUEUE_PORT ,BYTE2 ,24 ,8 ) +/* Address assignment command structure */ +/* +* bits 3..21 and 26..31 are the same as the transfer command structure, or
hw/i3c/dw-i3c.c +108
-0+* marked as reserved. +*/ + FIELD(COMMAND_QUEUE_PORT, DEV_COUNT, 21, 3) REG32(RESPONSE_QUEUE_PORT, 0x10) + FIELD(RESPONSE_QUEUE_PORT, DL, 0, 16) + FIELD(RESPONSE_QUEUE_PORT, CCCT, 16, 8) + FIELD(RESPONSE_QUEUE_PORT, TID, 24, 4) + FIELD(RESPONSE_QUEUE_PORT, ERR_STATUS, 28, 4) REG32(RX_TX_DATA_PORT, 0x14) REG32(IBI_QUEUE_STATUS, 0x18) + FIELD(IBI_QUEUE_STATUS, IBI_DATA_LEN, 0, 8) + FIELD(IBI_QUEUE_STATUS, IBI_ID, 8, 8) + FIELD(IBI_QUEUE_STATUS, LAST_STATUS, 24, 1) + FIELD(IBI_QUEUE_STATUS, ERROR, 30, 1) + FIELD(IBI_QUEUE_STATUS, IBI_STATUS, 31, 1) REG32(IBI_QUEUE_DATA, 0x18) REG32(QUEUE_THLD_CTRL, 0x1c) +FIELD (QUEUE_THLD_CTRL ,CMD_BUF_EMPTY_THLD ,0 ,8 ); +FIELD (QUEUE_THLD_CTRL ,RESP_BUF_THLD ,8 ,8 ); +FIELD (QUEUE_THLD_CTRL ,IBI_DATA_THLD ,16 ,8 ); +FIELD (QUEUE_THLD_CTRL ,IBI_STATUS_THLD ,24 ,8 ); REG32(DATA_BUFFER_THLD_CTRL, 0x20) + FIELD(DATA_BUFFER_THLD_CTRL, TX_BUF_THLD, 0, 3) + FIELD(DATA_BUFFER_THLD_CTRL, RX_BUF_THLD, 10, 3) + FIELD(DATA_BUFFER_THLD_CTRL, TX_START_THLD, 16, 3) + FIELD(DATA_BUFFER_THLD_CTRL, RX_START_THLD, 24, 3) REG32(IBI_QUEUE_CTRL, 0x24) + FIELD(IBI_QUEUE_CTRL, NOTIFY_REJECTED_HOT_JOIN, 0, 1) + FIELD(IBI_QUEUE_CTRL, NOTIFY_REJECTED_MASTER_REQ, 1, 1) + FIELD(IBI_QUEUE_CTRL, NOTIFY_REJECTED_SLAVE_IRQ, 3, 1) REG32(IBI_MR_REQ_REJECT, 0x2c) REG32(IBI_SIR_REQ_REJECT, 0x30) REG32(RESET_CTRL, 0x34) + FIELD(RESET_CTRL, CORE_RESET, 0, 1) + FIELD(RESET_CTRL, CMD_QUEUE_RESET, 1, 1) + FIELD(RESET_CTRL, RESP_QUEUE_RESET, 2, 1) + FIELD(RESET_CTRL, TX_BUF_RESET, 3, 1) + FIELD(RESET_CTRL, RX_BUF_RESET, 4, 1) + FIELD(RESET_CTRL, IBI_QUEUE_RESET, 5, 1) REG32(SLV_EVENT_CTRL, 0x38) + FIELD(SLV_EVENT_CTRL, SLV_INTERRUPT, 0, 1) + FIELD(SLV_EVENT_CTRL, MASTER_INTERRUPT, 1, 1) + FIELD(SLV_EVENT_CTRL, HOT_JOIN_INTERRUPT, 3, 1) + FIELD(SLV_EVENT_CTRL, ACTIVITY_STATE, 4, 2) + FIELD(SLV_EVENT_CTRL, MRL_UPDATED, 6, 1) + FIELD(SLV_EVENT_CTRL, MWL_UPDATED, 7, 1) REG32(INTR_STATUS, 0x3c) + FIELD(INTR_STATUS, TX_THLD, 0, 1) + FIELD(INTR_STATUS, RX_THLD, 1, 1) + FIELD(INTR_STATUS, IBI_THLD, 2, 1) + FIELD(INTR_STATUS, CMD_QUEUE_RDY, 3, 1) + FIELD(INTR_STATUS, RESP_RDY, 4, 1) + FIELD(INTR_STATUS, TRANSFER_ABORT, 5, 1) + FIELD(INTR_STATUS, CCC_UPDATED, 6, 1) + FIELD(INTR_STATUS, DYN_ADDR_ASSGN, 8, 1) + FIELD(INTR_STATUS, TRANSFER_ERR, 9, 1) + FIELD(INTR_STATUS, DEFSLV, 10, 1) + FIELD(INTR_STATUS, READ_REQ_RECV, 11, 1) + FIELD(INTR_STATUS, IBI_UPDATED, 12, 1) + FIELD(INTR_STATUS, BUSOWNER_UPDATED, 13, 1) REG32(INTR_STATUS_EN, 0x40) + FIELD(INTR_STATUS_EN, TX_THLD, 0, 1) + FIELD(INTR_STATUS_EN, RX_THLD, 1, 1) + FIELD(INTR_STATUS_EN, IBI_THLD, 2, 1) + FIELD(INTR_STATUS_EN, CMD_QUEUE_RDY, 3, 1) + FIELD(INTR_STATUS_EN, RESP_RDY, 4, 1) + FIELD(INTR_STATUS_EN, TRANSFER_ABORT, 5, 1) + FIELD(INTR_STATUS_EN, CCC_UPDATED, 6, 1) + FIELD(INTR_STATUS_EN, DYN_ADDR_ASSGN, 8, 1) + FIELD(INTR_STATUS_EN, TRANSFER_ERR, 9, 1) + FIELD(INTR_STATUS_EN, DEFSLV, 10, 1) + FIELD(INTR_STATUS_EN, READ_REQ_RECV, 11, 1) + FIELD(INTR_STATUS_EN, IBI_UPDATED, 12, 1) + FIELD(INTR_STATUS_EN, BUSOWNER_UPDATED, 13, 1) REG32(INTR_SIGNAL_EN, 0x44) + FIELD(INTR_SIGNAL_EN, TX_THLD, 0, 1) + FIELD(INTR_SIGNAL_EN, RX_THLD, 1, 1) + FIELD(INTR_SIGNAL_EN, IBI_THLD, 2, 1) + FIELD(INTR_SIGNAL_EN, CMD_QUEUE_RDY, 3, 1) + FIELD(INTR_SIGNAL_EN, RESP_RDY, 4, 1) + FIELD(INTR_SIGNAL_EN, TRANSFER_ABORT, 5, 1) + FIELD(INTR_SIGNAL_EN, CCC_UPDATED, 6, 1) + FIELD(INTR_SIGNAL_EN, DYN_ADDR_ASSGN, 8, 1) + FIELD(INTR_SIGNAL_EN, TRANSFER_ERR, 9, 1) + FIELD(INTR_SIGNAL_EN, DEFSLV, 10, 1) + FIELD(INTR_SIGNAL_EN, READ_REQ_RECV, 11, 1) + FIELD(INTR_SIGNAL_EN, IBI_UPDATED, 12, 1) + FIELD(INTR_SIGNAL_EN, BUSOWNER_UPDATED, 13, 1) REG32(INTR_FORCE, 0x48) + FIELD(INTR_FORCE, TX_THLD, 0, 1) + FIELD(INTR_FORCE, RX_THLD, 1, 1) + FIELD(INTR_FORCE, IBI_THLD, 2, 1) + FIELD(INTR_FORCE, CMD_QUEUE_RDY, 3, 1) + FIELD(INTR_FORCE, RESP_RDY, 4, 1) + FIELD(INTR_FORCE, TRANSFER_ABORT, 5, 1) + FIELD(INTR_FORCE, CCC_UPDATED, 6, 1) + FIELD(INTR_FORCE, DYN_ADDR_ASSGN, 8, 1) + FIELD(INTR_FORCE, TRANSFER_ERR, 9, 1) + FIELD(INTR_FORCE, DEFSLV, 10, 1) + FIELD(INTR_FORCE, READ_REQ_RECV, 11, 1) + FIELD(INTR_FORCE, IBI_UPDATED, 12, 1) + FIELD(INTR_FORCE, BUSOWNER_UPDATED, 13, 1) REG32(QUEUE_STATUS_LEVEL, 0x4c) + FIELD(QUEUE_STATUS_LEVEL, CMD_QUEUE_EMPTY_LOC, 0, 8) + FIELD(QUEUE_STATUS_LEVEL, RESP_BUF_BLR, 8, 8) + FIELD(QUEUE_STATUS_LEVEL, IBI_BUF_BLR, 16, 8) + FIELD(QUEUE_STATUS_LEVEL, IBI_STATUS_CNT, 24, 5) REG32(DATA_BUFFER_STATUS_LEVEL, 0x50) + FIELD(DATA_BUFFER_STATUS_LEVEL, TX_BUF_EMPTY_LOC, 0, 8) + FIELD(DATA_BUFFER_STATUS_LEVEL, RX_BUF_BLR, 16, 8) REG32(PRESENT_STATE, 0x54) + FIELD(PRESENT_STATE, SCL_LINE_SIGNAL_LEVEL, 0, 1) + FIELD(PRESENT_STATE, SDA_LINE_SIGNAL_LEVEL, 1, 1) + FIELD(PRESENT_STATE, CURRENT_MASTER, 2, 1) + FIELD(PRESENT_STATE, CM_TFR_STATUS, 8, 6) + FIELD(PRESENT_STATE, CM_TFR_ST_STATUS, 16, 6) + FIELD(PRESENT_STATE, CMD_TID, 24, 4) REG32(CCC_DEVICE_STATUS, 0x58) + FIELD(CCC_DEVICE_STATUS, PENDING_INTR, 0, 4) + FIELD(CCC_DEVICE_STATUS, PROTOCOL_ERR, 4, 2) + FIELD(CCC_DEVICE_STATUS, ACTIVITY_MODE, 6, 2) + FIELD(CCC_DEVICE_STATUS, UNDER_ERR, 8, 1) + FIELD(CCC_DEVICE_STATUS, SLV_BUSY, 9, 1) + FIELD(CCC_DEVICE_STATUS, OVERFLOW_ERR, 10, 1) + FIELD(CCC_DEVICE_STATUS, DATA_NOT_READY, 11, 1) + FIELD(CCC_DEVICE_STATUS, BUFFER_NOT_AVAIL, 12, 1) REG32(DEVICE_ADDR_TABLE_POINTER, 0x5c) FIELD(DEVICE_ADDR_TABLE_POINTER, DEPTH, 16, 16) FIELD(DEVICE_ADDR_TABLE_POINTER, ADDR, 0, 16) REG32(DEV_CHAR_TABLE_POINTER, 0x60) + FIELD(DEV_CHAR_TABLE_POINTER, P_DEV_CHAR_TABLE_START_ADDR,0, 12)
+ FIELD(DEV_CHAR_TABLE_POINTER,DEV_CHAR_TABLE_DEPTH,
12, 7)
+ FIELD(DEV_CHAR_TABLE_POINTER,PRESENT_DEV_CHAR_TABLE_INDEX,
19, 3)
REG32(VENDOR_SPECIFIC_REG_POINTER, 0x6c)
+ FIELD(VENDOR_SPECIFIC_REG_POINTER,P_VENDOR_REG_START_ADDR,
0, 16)
REG32(SLV_MIPI_PID_VALUE, 0x70)
REG32(SLV_PID_VALUE, 0x74)hw/i3c/dw-i3c.c +45
-0+ FIELD(SLV_PID_VALUE, SLV_PID_DCR, 0, 12) + FIELD(SLV_PID_VALUE, SLV_INST_ID, 12, 4) + FIELD(SLV_PID_VALUE, SLV_PART_ID, 16, 16) REG32(SLV_CHAR_CTRL, 0x78) + FIELD(SLV_CHAR_CTRL, BCR, 0, 8) + FIELD(SLV_CHAR_CTRL, DCR, 8, 8) + FIELD(SLV_CHAR_CTRL, HDR_CAP, 16, 8) REG32(SLV_MAX_LEN, 0x7c) + FIELD(SLV_MAX_LEN, MWL, 0, 16) + FIELD(SLV_MAX_LEN, MRL, 16, 16) REG32(MAX_READ_TURNAROUND, 0x80) REG32(MAX_DATA_SPEED, 0x84) REG32(SLV_DEBUG_STATUS, 0x88) REG32(SLV_INTR_REQ, 0x8c) + FIELD(SLV_INTR_REQ, SIR, 0, 1) + FIELD(SLV_INTR_REQ, SIR_CTRL, 1, 2) + FIELD(SLV_INTR_REQ, MIR, 3, 1) + FIELD(SLV_INTR_REQ, TS, 4, 1) + FIELD(SLV_INTR_REQ, IBI_STS, 8, 2) + FIELD(SLV_INTR_REQ, MDB, 8, 8) + FIELD(SLV_INTR_REQ, SIR_DATA_LEN, 16, 8) +REG32(SLV_TSX_SYMBL_TIMING, 0x90) + FIELD(SLV_TSX_SYMBL_TIMING, SLV_TSX_SYMBL_CNT, 0, 6) +REG32(SLV_SIR_DATA, 0x94) + FIELD(SLV_SIR_DATA, SIR_DATA_BYTE0, 0, 8) + FIELD(SLV_SIR_DATA, SIR_DATA_BYTE1, 8, 8) + FIELD(SLV_SIR_DATA, SIR_DATA_BYTE2, 16, 8) + FIELD(SLV_SIR_DATA, SIR_DATA_BYTE3, 24, 8) +REG32(SLV_IBI_RESP, 0x98) + FIELD(SLV_IBI_RESP, IBI_STS, 0, 2) + FIELD(SLV_IBI_RESP, SIR_RESP_DATA_LEN, 8, 16) REG32(DEVICE_CTRL_EXTENDED, 0xb0) + FIELD(DEVICE_CTRL_EXTENDED, MODE, 0, 2) + FIELD(DEVICE_CTRL_EXTENDED, REQMST_ACK_CTRL, 3, 1) REG32(SCL_I3C_OD_TIMING, 0xb4) + FIELD(SCL_I3C_OD_TIMING, I3C_OD_LCNT, 0, 8) + FIELD(SCL_I3C_OD_TIMING, I3C_OD_HCNT, 16, 8) REG32(SCL_I3C_PP_TIMING, 0xb8) + FIELD(SCL_I3C_PP_TIMING, I3C_PP_LCNT, 0, 8) + FIELD(SCL_I3C_PP_TIMING, I3C_PP_HCNT, 16, 8) REG32(SCL_I2C_FM_TIMING, 0xbc) REG32(SCL_I2C_FMP_TIMING, 0xc0) + FIELD(SCL_I2C_FMP_TIMING, I2C_FMP_LCNT, 0, 16) + FIELD(SCL_I2C_FMP_TIMING, I2C_FMP_HCNT, 16, 8) REG32(SCL_EXT_LCNT_TIMING, 0xc8) REG32(SCL_EXT_TERMN_LCNT_TIMING, 0xcc) REG32(BUS_FREE_TIMING, 0xd4) REG32(BUS_IDLE_TIMING, 0xd8) + FIELD(BUS_IDLE_TIMING, BUS_IDLE_TIME, 0, 20) REG32(I3C_VER_ID, 0xe0) REG32(I3C_VER_TYPE, 0xe4) REG32(EXTENDED_CAPABILITY, 0xe8) + FIELD(EXTENDED_CAPABILITY, APP_IF_MODE, 0, 2) + FIELD(EXTENDED_CAPABILITY, APP_IF_DATA_WIDTH, 2, 2) + FIELD(EXTENDED_CAPABILITY, OPERATION_MODE, 4, 2) + FIELD(EXTENDED_CAPABILITY, CLK_PERIOD, 8, 6) REG32(SLAVE_CONFIG, 0xec) + FIELD(SLAVE_CONFIG, DMA_EN, 0, 1) + FIELD(SLAVE_CONFIG, HJ_CAP, 0, 1) +FIELD (SLAVE_CONFIG ,CLK_PERIOD ,2 ,14 ) +/* Device characteristic table fields */ +REG32(DEVICE_CHARACTERISTIC_TABLE_LOC1, 0x200) +REG32(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, 0x200) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY,
DYNAMIC_ADDR, 0, 8)hw/i3c/dw-i3c.c +3
-0+ FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, DCR, 8, 8) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, BCR, 16, 8) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, STATIC_ADDR,24,
+8)REG32(DEVICE_CHARACTERISTIC_TABLE_LOC2, 0x204)hw/i3c/dw-i3c.c +6
-0+ FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC2, MSB_PID, 0, 16) +REG32(DEVICE_CHARACTERISTIC_TABLE_LOC3, 0x208) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC3, DCR, 0, 8) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC3, BCR, 8, 8) +REG32(DEVICE_CHARACTERISTIC_TABLE_LOC4, 0x20c) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC4, DEV_DYNAMIC_ADDR, 0,8)
hw/i3c/dw-i3c.c +11
-1+/* Dev addr table fields */ +REG32(DEVICE_ADDR_TABLE_LOC1, 0x280) + FIELD(DEVICE_ADDR_TABLE_LOC1, DEV_STATIC_ADDR, 0, 7) + FIELD(DEVICE_ADDR_TABLE_LOC1, IBI_PEC_EN, 11, 1) + FIELD(DEVICE_ADDR_TABLE_LOC1, IBI_WITH_DATA, 12, 1) + FIELD(DEVICE_ADDR_TABLE_LOC1, SIR_REJECT, 13, 1) + FIELD(DEVICE_ADDR_TABLE_LOC1, MR_REJECT, 14, 1) + FIELD(DEVICE_ADDR_TABLE_LOC1, DEV_DYNAMIC_ADDR, 16, 8) + FIELD(DEVICE_ADDR_TABLE_LOC1, IBI_ADDR_MASK, 24, 2) + FIELD(DEVICE_ADDR_TABLE_LOC1, DEV_NACK_RETRY_CNT, 29, 2) + FIELD(DEVICE_ADDR_TABLE_LOC1, LEGACY_I2C_DEVICE, 31, 1)static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS ] = { [R_HW_CAPABILITY ] =0x000e00bf , --
Quoted 1 line
2.50.0.rc1.591.g9c95f17f64-goog
Thanks,
Jamin
RE: [PATCH 04/19] hw/i3c/dw-i3c: Add more register fields
Hi Joe
Sorry—after reviewing your I3C model in more detail, I found some issues that may be incorrect. Could you please help check them?
Thanks-Jamin
Quoted 22 lines
Subject: RE: [PATCH 04/19] hw/i3c/dw-i3c: Add more register fields
Quoted 20 lines
Subject: [PATCH 04/19] hw/i3c/dw-i3c: Add more register fields
Adds the rest of the Designware register fields.
Signed-off-by Joe Komlodi <[email protected]>Reviewed-by Patrick Venture <[email protected]>--- hw/i3c/dw-i3c.c | 216 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 216 insertions(+)hw/i3c/dw-i3c.c index renamed from hw/i3c/dw-i3c.c +0
-0
4b1a3f3f07..b252903ea4
100644hw/i3c/dw-i3c.c +0
-0@@ -19,54 +19,270 @@#include "trace.h"
Quoted 15 lines
Quoted 5 lines
hw/i3c/dw-i3c.c +4
-0REG32(DEVICE_CTRL, 0x00) + FIELD(DEVICE_CTRL, I3C_BROADCAST_ADDR_INC, 0, 1) + FIELD(DEVICE_CTRL, I2C_SLAVE_PRESENT, 7, 1) + FIELD(DEVICE_CTRL, HOT_JOIN_ACK_NACK_CTRL, 8, 1) +FIELD (DEVICE_CTRL ,IDLE_CNT_MULTIPLIER ,24 ,2 )hw/i3c/dw-i3c.c line 35
Quoted 10 lines
hw/i3c/dw-i3c.c +9
-0+ FIELD(DEVICE_CTRL, SLV_ADAPT_TO_I2C_I3C_MODE, 27, 1) + FIELD(DEVICE_CTRL, DMA_HANDSHAKE_EN, 28, 1) + FIELD(DEVICE_CTRL, I3C_ABORT, 29, 1) + FIELD(DEVICE_CTRL, I3C_RESUME, 30, 1) + FIELD(DEVICE_CTRL, I3C_EN, 31, 1) REG32(DEVICE_ADDR, 0x04) + FIELD(DEVICE_ADDR, STATIC_ADDR, 0, 7) + FIELD(DEVICE_ADDR, STATIC_ADDR_VALID, 15, 1) + FIELD(DEVICE_ADDR, DYNAMIC_ADDR, 16, 7) +FIELD (DEVICE_ADDR ,DYNAMIC_ADDR_VALID ,15 ,1 )
It should be 31, 1
Quoted 2 lines
hw/i3c/dw-i3c.c line 37
Quoted 2 lines
hw/i3c/dw-i3c.c +1
-0REG32(HW_CAPABILITY, 0x08) +FIELD (HW_CAPABILITY ,DEVICE_ROLE_CONFIG ,0 ,2 )
It should be 0,3
Quoted 27 lines
Quoted 27 lines
hw/i3c/dw-i3c.c +26
-0+ FIELD(HW_CAPABILITY, HDR_DDR, 3, 1) + FIELD(HW_CAPABILITY, HDR_TS, 4, 1) REG32(COMMAND_QUEUE_PORT, 0x0c) +FIELD (COMMAND_QUEUE_PORT ,CMD_ATTR ,0 ,3 ) + /* Transfer command structure */ + FIELD(COMMAND_QUEUE_PORT, TID, 3, 4) + FIELD(COMMAND_QUEUE_PORT, CMD, 7, 8) + FIELD(COMMAND_QUEUE_PORT, CP, 15, 1) + FIELD(COMMAND_QUEUE_PORT, DEV_INDEX, 16, 5) + FIELD(COMMAND_QUEUE_PORT, SPEED, 21, 3) + FIELD(COMMAND_QUEUE_PORT, ROC, 26, 1) + FIELD(COMMAND_QUEUE_PORT, SDAP, 27, 1) + FIELD(COMMAND_QUEUE_PORT, RNW, 28, 1) + FIELD(COMMAND_QUEUE_PORT, TOC, 30, 1) +FIELD (COMMAND_QUEUE_PORT ,PEC ,31 ,1 ) + /* Transfer argument data structure */ + FIELD(COMMAND_QUEUE_PORT, DB, 8, 8) +FIELD (COMMAND_QUEUE_PORT ,DL ,16 ,16 ) + /* Short data argument data structure */ + FIELD(COMMAND_QUEUE_PORT, BYTE_STRB, 3, 3) + FIELD(COMMAND_QUEUE_PORT, BYTE0, 8, 8) + FIELD(COMMAND_QUEUE_PORT, BYTE1, 16, 8) +FIELD (COMMAND_QUEUE_PORT ,BYTE2 ,24 ,8 ) +/* Address assignment command structure */ +/* +* bits 3..21 and 26..31 are the same as the transfer command +structure,
Quoted 8 lines
hw/i3c/dw-i3c.c line 70
Quoted 8 lines
or
hw/i3c/dw-i3c.c +6
-0+* marked as reserved. +*/ + FIELD(COMMAND_QUEUE_PORT, DEV_COUNT, 21, 3) REG32(RESPONSE_QUEUE_PORT, 0x10) + FIELD(RESPONSE_QUEUE_PORT, DL, 0, 16) + FIELD(RESPONSE_QUEUE_PORT, CCCT, 16, 8) +FIELD (RESPONSE_QUEUE_PORT ,TID ,24 ,4 )
It should be 24,3
Quoted 5 lines
Quoted 5 lines
hw/i3c/dw-i3c.c +3
-0+ FIELD(RESPONSE_QUEUE_PORT, ERR_STATUS, 28, 4) REG32(RX_TX_DATA_PORT, 0x14) REG32(IBI_QUEUE_STATUS, 0x18) + FIELD(IBI_QUEUE_STATUS, IBI_DATA_LEN, 0, 8) +FIELD (IBI_QUEUE_STATUS ,IBI_ID ,8 ,8 )
Quoted 8 lines
hw/i3c/dw-i3c.c line 83
Quoted 8 lines
hw/i3c/dw-i3c.c +6
-0+ FIELD(IBI_QUEUE_STATUS, LAST_STATUS, 24, 1) + FIELD(IBI_QUEUE_STATUS, ERROR, 30, 1) + FIELD(IBI_QUEUE_STATUS, IBI_STATUS, 31, 1) REG32(IBI_QUEUE_DATA, 0x18) REG32(QUEUE_THLD_CTRL, 0x1c) +FIELD (QUEUE_THLD_CTRL ,CMD_BUF_EMPTY_THLD ,0 ,8 ); +FIELD (QUEUE_THLD_CTRL ,RESP_BUF_THLD ,8 ,8 ); +FIELD (QUEUE_THLD_CTRL ,IBI_DATA_THLD ,16 ,8 );
it should be 16,5
Quoted 4 lines
hw/i3c/dw-i3c.c line 87
Quoted 4 lines
hw/i3c/dw-i3c.c +3
-0+FIELD (QUEUE_THLD_CTRL ,IBI_STATUS_THLD ,24 ,8 ); REG32(DATA_BUFFER_THLD_CTRL, 0x20) + FIELD(DATA_BUFFER_THLD_CTRL, TX_BUF_THLD, 0, 3) +FIELD (DATA_BUFFER_THLD_CTRL ,RX_BUF_THLD ,10 ,3 )
It should be 8,3
Quoted 88 lines
Quoted 88 lines
hw/i3c/dw-i3c.c +76
-0+ FIELD(DATA_BUFFER_THLD_CTRL, TX_START_THLD, 16, 3) + FIELD(DATA_BUFFER_THLD_CTRL, RX_START_THLD, 24, 3) REG32(IBI_QUEUE_CTRL, 0x24) + FIELD(IBI_QUEUE_CTRL, NOTIFY_REJECTED_HOT_JOIN, 0, 1) + FIELD(IBI_QUEUE_CTRL, NOTIFY_REJECTED_MASTER_REQ, 1, 1) + FIELD(IBI_QUEUE_CTRL, NOTIFY_REJECTED_SLAVE_IRQ, 3, 1) REG32(IBI_MR_REQ_REJECT, 0x2c) REG32(IBI_SIR_REQ_REJECT, 0x30) REG32(RESET_CTRL, 0x34) + FIELD(RESET_CTRL, CORE_RESET, 0, 1) + FIELD(RESET_CTRL, CMD_QUEUE_RESET, 1, 1) + FIELD(RESET_CTRL, RESP_QUEUE_RESET, 2, 1) + FIELD(RESET_CTRL, TX_BUF_RESET, 3, 1) + FIELD(RESET_CTRL, RX_BUF_RESET, 4, 1) + FIELD(RESET_CTRL, IBI_QUEUE_RESET, 5, 1) REG32(SLV_EVENT_CTRL, 0x38) + FIELD(SLV_EVENT_CTRL, SLV_INTERRUPT, 0, 1) + FIELD(SLV_EVENT_CTRL, MASTER_INTERRUPT, 1, 1) + FIELD(SLV_EVENT_CTRL, HOT_JOIN_INTERRUPT, 3, 1) + FIELD(SLV_EVENT_CTRL, ACTIVITY_STATE, 4, 2) + FIELD(SLV_EVENT_CTRL, MRL_UPDATED, 6, 1) + FIELD(SLV_EVENT_CTRL, MWL_UPDATED, 7, 1) REG32(INTR_STATUS, 0x3c) + FIELD(INTR_STATUS, TX_THLD, 0, 1) + FIELD(INTR_STATUS, RX_THLD, 1, 1) + FIELD(INTR_STATUS, IBI_THLD, 2, 1) + FIELD(INTR_STATUS, CMD_QUEUE_RDY, 3, 1) + FIELD(INTR_STATUS, RESP_RDY, 4, 1) + FIELD(INTR_STATUS, TRANSFER_ABORT, 5, 1) + FIELD(INTR_STATUS, CCC_UPDATED, 6, 1) + FIELD(INTR_STATUS, DYN_ADDR_ASSGN, 8, 1) + FIELD(INTR_STATUS, TRANSFER_ERR, 9, 1) + FIELD(INTR_STATUS, DEFSLV, 10, 1) + FIELD(INTR_STATUS, READ_REQ_RECV, 11, 1) + FIELD(INTR_STATUS, IBI_UPDATED, 12, 1) + FIELD(INTR_STATUS, BUSOWNER_UPDATED, 13, 1) REG32(INTR_STATUS_EN, 0x40) + FIELD(INTR_STATUS_EN, TX_THLD, 0, 1) + FIELD(INTR_STATUS_EN, RX_THLD, 1, 1) + FIELD(INTR_STATUS_EN, IBI_THLD, 2, 1) + FIELD(INTR_STATUS_EN, CMD_QUEUE_RDY, 3, 1) + FIELD(INTR_STATUS_EN, RESP_RDY, 4, 1) + FIELD(INTR_STATUS_EN, TRANSFER_ABORT, 5, 1) + FIELD(INTR_STATUS_EN, CCC_UPDATED, 6, 1) + FIELD(INTR_STATUS_EN, DYN_ADDR_ASSGN, 8, 1) + FIELD(INTR_STATUS_EN, TRANSFER_ERR, 9, 1) + FIELD(INTR_STATUS_EN, DEFSLV, 10, 1) + FIELD(INTR_STATUS_EN, READ_REQ_RECV, 11, 1) + FIELD(INTR_STATUS_EN, IBI_UPDATED, 12, 1) + FIELD(INTR_STATUS_EN, BUSOWNER_UPDATED, 13, 1) REG32(INTR_SIGNAL_EN, 0x44) + FIELD(INTR_SIGNAL_EN, TX_THLD, 0, 1) + FIELD(INTR_SIGNAL_EN, RX_THLD, 1, 1) + FIELD(INTR_SIGNAL_EN, IBI_THLD, 2, 1) + FIELD(INTR_SIGNAL_EN, CMD_QUEUE_RDY, 3, 1) + FIELD(INTR_SIGNAL_EN, RESP_RDY, 4, 1) + FIELD(INTR_SIGNAL_EN, TRANSFER_ABORT, 5, 1) + FIELD(INTR_SIGNAL_EN, CCC_UPDATED, 6, 1) + FIELD(INTR_SIGNAL_EN, DYN_ADDR_ASSGN, 8, 1) + FIELD(INTR_SIGNAL_EN, TRANSFER_ERR, 9, 1) + FIELD(INTR_SIGNAL_EN, DEFSLV, 10, 1) + FIELD(INTR_SIGNAL_EN, READ_REQ_RECV, 11, 1) + FIELD(INTR_SIGNAL_EN, IBI_UPDATED, 12, 1) + FIELD(INTR_SIGNAL_EN, BUSOWNER_UPDATED, 13, 1) REG32(INTR_FORCE, 0x48) + FIELD(INTR_FORCE, TX_THLD, 0, 1) + FIELD(INTR_FORCE, RX_THLD, 1, 1) + FIELD(INTR_FORCE, IBI_THLD, 2, 1) + FIELD(INTR_FORCE, CMD_QUEUE_RDY, 3, 1) + FIELD(INTR_FORCE, RESP_RDY, 4, 1) + FIELD(INTR_FORCE, TRANSFER_ABORT, 5, 1) + FIELD(INTR_FORCE, CCC_UPDATED, 6, 1) + FIELD(INTR_FORCE, DYN_ADDR_ASSGN, 8, 1) + FIELD(INTR_FORCE, TRANSFER_ERR, 9, 1) + FIELD(INTR_FORCE, DEFSLV, 10, 1) + FIELD(INTR_FORCE, READ_REQ_RECV, 11, 1) + FIELD(INTR_FORCE, IBI_UPDATED, 12, 1) + FIELD(INTR_FORCE, BUSOWNER_UPDATED, 13, 1) REG32(QUEUE_STATUS_LEVEL, 0x4c) + FIELD(QUEUE_STATUS_LEVEL, CMD_QUEUE_EMPTY_LOC, 0, 8) + FIELD(QUEUE_STATUS_LEVEL, RESP_BUF_BLR, 8, 8) + FIELD(QUEUE_STATUS_LEVEL, IBI_BUF_BLR, 16, 8) + FIELD(QUEUE_STATUS_LEVEL, IBI_STATUS_CNT, 24, 5) REG32(DATA_BUFFER_STATUS_LEVEL, 0x50) + FIELD(DATA_BUFFER_STATUS_LEVEL, TX_BUF_EMPTY_LOC, 0, 8) + FIELD(DATA_BUFFER_STATUS_LEVEL, RX_BUF_BLR, 16, 8) REG32(PRESENT_STATE, 0x54) +FIELD (PRESENT_STATE ,SCL_LINE_SIGNAL_LEVEL ,0 ,1 )
Quoted 8 lines
hw/i3c/dw-i3c.c line 183
Quoted 8 lines
hw/i3c/dw-i3c.c +7
-0+ FIELD(PRESENT_STATE, SDA_LINE_SIGNAL_LEVEL, 1, 1) + FIELD(PRESENT_STATE, CURRENT_MASTER, 2, 1) + FIELD(PRESENT_STATE, CM_TFR_STATUS, 8, 6) + FIELD(PRESENT_STATE, CM_TFR_ST_STATUS, 16, 6) + FIELD(PRESENT_STATE, CMD_TID, 24, 4) REG32(CCC_DEVICE_STATUS, 0x58) + FIELD(CCC_DEVICE_STATUS, PENDING_INTR, 0, 4) +FIELD (CCC_DEVICE_STATUS ,PROTOCOL_ERR ,4 ,2 )
It should be 5,1 (I asked our designers to update datasheet)
Quoted 16 lines
hw/i3c/dw-i3c.c
Quoted 11 lines
hw/i3c/dw-i3c.c +7
-0+ FIELD(CCC_DEVICE_STATUS, ACTIVITY_MODE, 6, 2) + FIELD(CCC_DEVICE_STATUS, UNDER_ERR, 8, 1) + FIELD(CCC_DEVICE_STATUS, SLV_BUSY, 9, 1) + FIELD(CCC_DEVICE_STATUS, OVERFLOW_ERR, 10, 1) + FIELD(CCC_DEVICE_STATUS, DATA_NOT_READY, 11, 1) + FIELD(CCC_DEVICE_STATUS, BUFFER_NOT_AVAIL, 12, 1) REG32(DEVICE_ADDR_TABLE_POINTER, 0x5c) FIELD(DEVICE_ADDR_TABLE_POINTER, DEPTH, 16, 16) FIELD(DEVICE_ADDR_TABLE_POINTER, ADDR, 0, 16) REG32(DEV_CHAR_TABLE_POINTER, 0x60) + FIELD(DEV_CHAR_TABLE_POINTER,
P_DEV_CHAR_TABLE_START_ADDR,Quoted 4 lines
0, 12)
+ FIELD(DEV_CHAR_TABLE_POINTER,DEV_CHAR_TABLE_DEPTH,
12, 7)
+ FIELD(DEV_CHAR_TABLE_POINTER,
Quoted 28 lines
PRESENT_DEV_CHAR_TABLE_INDEX,Quoted 3 lines
19, 3)
REG32(VENDOR_SPECIFIC_REG_POINTER, 0x6c)
+ FIELD(VENDOR_SPECIFIC_REG_POINTER,
P_VENDOR_REG_START_ADDR,Quoted 23 lines
0, 16)
REG32(SLV_MIPI_PID_VALUE, 0x70)
REG32(SLV_PID_VALUE, 0x74)hw/i3c/dw-i3c.c +14
-0+ FIELD(SLV_PID_VALUE, SLV_PID_DCR, 0, 12) + FIELD(SLV_PID_VALUE, SLV_INST_ID, 12, 4) + FIELD(SLV_PID_VALUE, SLV_PART_ID, 16, 16) REG32(SLV_CHAR_CTRL, 0x78) + FIELD(SLV_CHAR_CTRL, BCR, 0, 8) + FIELD(SLV_CHAR_CTRL, DCR, 8, 8) + FIELD(SLV_CHAR_CTRL, HDR_CAP, 16, 8) REG32(SLV_MAX_LEN, 0x7c) + FIELD(SLV_MAX_LEN, MWL, 0, 16) + FIELD(SLV_MAX_LEN, MRL, 16, 16) REG32(MAX_READ_TURNAROUND, 0x80) REG32(MAX_DATA_SPEED, 0x84) REG32(SLV_DEBUG_STATUS, 0x88) REG32(SLV_INTR_REQ, 0x8c) + FIELD(SLV_INTR_REQ, SIR, 0, 1) + FIELD(SLV_INTR_REQ, SIR_CTRL, 1, 2) + FIELD(SLV_INTR_REQ, MIR, 3, 1) + FIELD(SLV_INTR_REQ, TS, 4, 1) + FIELD(SLV_INTR_REQ, IBI_STS, 8, 2) +FIELD (SLV_INTR_REQ ,MDB ,8 ,8 )
I don’t see this field defined in the datasheet. Which document are you referencing for this member?
Quoted 1 line
Quoted 1 line
+
FIELD(SLV_INTR_REQ, SIR_DATA_LEN, 16, 8)
I don’t see this field defined in the datasheet. Which document are you referencing for this member?
Quoted 1 line
Quoted 1 line
+REG32(SLV_TSX_SYMBL_TIMING,
0x90)
I don’t see this register defined in the datasheet. Which document are you referencing for this member?
Quoted 2 lines
hw/i3c/dw-i3c.c line 224
Quoted 2 lines
hw/i3c/dw-i3c.c +2
-0+ FIELD(SLV_TSX_SYMBL_TIMING, SLV_TSX_SYMBL_CNT, 0, 6) +REG32 (SLV_SIR_DATA ,0x94 )
I don’t see this register defined in the datasheet. Which document are you referencing for this member?
Quoted 5 lines
hw/i3c/dw-i3c.c line 229
Quoted 5 lines
hw/i3c/dw-i3c.c +5
-0+ FIELD(SLV_SIR_DATA, SIR_DATA_BYTE0, 0, 8) + FIELD(SLV_SIR_DATA, SIR_DATA_BYTE1, 8, 8) + FIELD(SLV_SIR_DATA, SIR_DATA_BYTE2, 16, 8) + FIELD(SLV_SIR_DATA, SIR_DATA_BYTE3, 24, 8) +REG32 (SLV_IBI_RESP ,0x98 )
I don’t see this register defined in the datasheet. Which document are you referencing for this member?
Quoted 15 lines
Quoted 15 lines
hw/i3c/dw-i3c.c +10
-0+ FIELD(SLV_IBI_RESP, IBI_STS, 0, 2) + FIELD(SLV_IBI_RESP, SIR_RESP_DATA_LEN, 8, 16) REG32(DEVICE_CTRL_EXTENDED, 0xb0) + FIELD(DEVICE_CTRL_EXTENDED, MODE, 0, 2) + FIELD(DEVICE_CTRL_EXTENDED, REQMST_ACK_CTRL, 3, 1) REG32(SCL_I3C_OD_TIMING, 0xb4) + FIELD(SCL_I3C_OD_TIMING, I3C_OD_LCNT, 0, 8) + FIELD(SCL_I3C_OD_TIMING, I3C_OD_HCNT, 16, 8) REG32(SCL_I3C_PP_TIMING, 0xb8) + FIELD(SCL_I3C_PP_TIMING, I3C_PP_LCNT, 0, 8) + FIELD(SCL_I3C_PP_TIMING, I3C_PP_HCNT, 16, 8) REG32(SCL_I2C_FM_TIMING, 0xbc) REG32(SCL_I2C_FMP_TIMING, 0xc0) + FIELD(SCL_I2C_FMP_TIMING, I2C_FMP_LCNT, 0, 16) +FIELD (SCL_I2C_FMP_TIMING ,I2C_FMP_HCNT ,16 ,8 )
Quoted 8 lines
Quoted 8 lines
REG32(SCL_EXT_LCNT_TIMING, 0xc8) REG32(SCL_EXT_TERMN_LCNT_TIMING, 0xcc) REG32(BUS_FREE_TIMING, 0xd4) REG32(BUS_IDLE_TIMING, 0xd8) + FIELD(BUS_IDLE_TIMING, BUS_IDLE_TIME, 0, 20) REG32(I3C_VER_ID, 0xe0) REG32(I3C_VER_TYPE, 0xe4) REG32(EXTENDED_CAPABILITY, 0xe8)
I don’t see this register defined in the datasheet. Which document are you referencing for this member?
Quoted 5 lines
hw/i3c/dw-i3c.c line 257
Quoted 5 lines
hw/i3c/dw-i3c.c +4
-0+ FIELD(EXTENDED_CAPABILITY, APP_IF_MODE, 0, 2) + FIELD(EXTENDED_CAPABILITY, APP_IF_DATA_WIDTH, 2, 2) + FIELD(EXTENDED_CAPABILITY, OPERATION_MODE, 4, 2) + FIELD(EXTENDED_CAPABILITY, CLK_PERIOD, 8, 6)REG32 (SLAVE_CONFIG ,0xec )
I don’t see this register defined in the datasheet. Which document are you referencing for this member?
Quoted 45 lines
hw/i3c/dw-i3c.c
Quoted 11 lines
hw/i3c/dw-i3c.c +7
-0+ FIELD(SLAVE_CONFIG, DMA_EN, 0, 1) + FIELD(SLAVE_CONFIG, HJ_CAP, 0, 1) +FIELD (SLAVE_CONFIG ,CLK_PERIOD ,2 ,14 ) +/* Device characteristic table fields */ +REG32(DEVICE_CHARACTERISTIC_TABLE_LOC1, 0x200) +REG32(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, 0x200) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY,
DYNAMIC_ADDR, 0, 8)hw/i3c/dw-i3c.c +3
-0+ FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, DCR, 8, 8) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY, BCR, 16, 8) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC_SECONDARY,
STATIC_ADDR,hw/i3c/dw-i3c.c
Quoted 8 lines
24,
+8)REG32(DEVICE_CHARACTERISTIC_TABLE_LOC2, 0x204)hw/i3c/dw-i3c.c +6
-0+ FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC2, MSB_PID, 0, 16) +REG32(DEVICE_CHARACTERISTIC_TABLE_LOC3, 0x208) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC3, DCR, 0, 8) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC3, BCR, 8, 8) +REG32(DEVICE_CHARACTERISTIC_TABLE_LOC4, 0x20c) + FIELD(DEVICE_CHARACTERISTIC_TABLE_LOC4, DEV_DYNAMIC_ADDR,0,
Quoted 16 lines
8)
hw/i3c/dw-i3c.c +11
-1+/* Dev addr table fields */ +REG32(DEVICE_ADDR_TABLE_LOC1, 0x280) + FIELD(DEVICE_ADDR_TABLE_LOC1, DEV_STATIC_ADDR, 0, 7) + FIELD(DEVICE_ADDR_TABLE_LOC1, IBI_PEC_EN, 11, 1) + FIELD(DEVICE_ADDR_TABLE_LOC1, IBI_WITH_DATA, 12, 1) + FIELD(DEVICE_ADDR_TABLE_LOC1, SIR_REJECT, 13, 1) + FIELD(DEVICE_ADDR_TABLE_LOC1, MR_REJECT, 14, 1) + FIELD(DEVICE_ADDR_TABLE_LOC1, DEV_DYNAMIC_ADDR, 16, 8) + FIELD(DEVICE_ADDR_TABLE_LOC1, IBI_ADDR_MASK, 24, 2) + FIELD(DEVICE_ADDR_TABLE_LOC1, DEV_NACK_RETRY_CNT, 29, 2) + FIELD(DEVICE_ADDR_TABLE_LOC1, LEGACY_I2C_DEVICE, 31, 1)static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS ] = { [R_HW_CAPABILITY ] =0x000e00bf , --Quoted 1 line
2.50.0.rc1.591.g9c95f17f64-goog
Reviewed-by Jamin Lin <[email protected]>Thanks,
Jamin
PATCH 5/19 hw/i3c/aspeed_i3c: Add more register fields
In reply to Joe KomlodiAdds the rest of the Aspeed I3C controller register fields.
--- hw/i3c/aspeed_i3c.c | 54 +++++++++++++++++++++++++++++++++++---------- 1 file changed, 42 insertions(+), 12 deletions(-)
hw/i3c/aspeed_i3c.c +42 -12
@@ -21,28 +21,58 @@/* I3C Controller Registers */ REG32(I3C1_REG0, 0x10) REG32(I3C1_REG1, 0x14) - FIELD(I3C1_REG1, I2C_MODE, 0, 1) - FIELD(I3C1_REG1, SA_EN, 15, 1) + FIELD(I3C1_REG1, I2C_MODE, 0, 1) + FIELD(I3C1_REG1, SLV_TEST_MODE, 1, 1) + FIELD(I3C1_REG1, ACT_MODE, 2, 2) + FIELD(I3C1_REG1, PENDING_INT, 4, 4) + FIELD(I3C1_REG1, SA, 8, 7) + FIELD(I3C1_REG1, SA_EN, 15, 1) + FIELD(I3C1_REG1, INST_ID, 16, 4) REG32(I3C2_REG0, 0x20) REG32(I3C2_REG1, 0x24) - FIELD(I3C2_REG1, I2C_MODE, 0, 1) - FIELD(I3C2_REG1, SA_EN, 15, 1) + FIELD(I3C2_REG1, I2C_MODE, 0, 1) + FIELD(I3C2_REG1, SLV_TEST_MODE, 1, 1) + FIELD(I3C2_REG1, ACT_MODE, 2, 2) + FIELD(I3C2_REG1, PENDING_INT, 4, 4) + FIELD(I3C2_REG1, SA, 8, 7) + FIELD(I3C2_REG1, SA_EN, 15, 1) + FIELD(I3C2_REG1, INST_ID, 16, 4) REG32(I3C3_REG0, 0x30) REG32(I3C3_REG1, 0x34) - FIELD(I3C3_REG1, I2C_MODE, 0, 1) - FIELD(I3C3_REG1, SA_EN, 15, 1) + FIELD(I3C3_REG1, I2C_MODE, 0, 1) + FIELD(I3C3_REG1, SLV_TEST_MODE, 1, 1) + FIELD(I3C3_REG1, ACT_MODE, 2, 2) + FIELD(I3C3_REG1, PENDING_INT, 4, 4) + FIELD(I3C3_REG1, SA, 8, 7) + FIELD(I3C3_REG1, SA_EN, 15, 1) + FIELD(I3C3_REG1, INST_ID, 16, 4) REG32(I3C4_REG0, 0x40) REG32(I3C4_REG1, 0x44) - FIELD(I3C4_REG1, I2C_MODE, 0, 1) - FIELD(I3C4_REG1, SA_EN, 15, 1) + FIELD(I3C4_REG1, I2C_MODE, 0, 1) + FIELD(I3C4_REG1, SLV_TEST_MODE, 1, 1) + FIELD(I3C4_REG1, ACT_MODE, 2, 2) + FIELD(I3C4_REG1, PENDING_INT, 4, 4) + FIELD(I3C4_REG1, SA, 8, 7) + FIELD(I3C4_REG1, SA_EN, 15, 1) + FIELD(I3C4_REG1, INST_ID, 16, 4) REG32(I3C5_REG0, 0x50) REG32(I3C5_REG1, 0x54) - FIELD(I3C5_REG1, I2C_MODE, 0, 1) - FIELD(I3C5_REG1, SA_EN, 15, 1) + FIELD(I3C5_REG1, I2C_MODE, 0, 1) + FIELD(I3C5_REG1, SLV_TEST_MODE, 1, 1) + FIELD(I3C5_REG1, ACT_MODE, 2, 2) + FIELD(I3C5_REG1, PENDING_INT, 4, 4) + FIELD(I3C5_REG1, SA, 8, 7) + FIELD(I3C5_REG1, SA_EN, 15, 1) + FIELD(I3C5_REG1, INST_ID, 16, 4) REG32(I3C6_REG0, 0x60) REG32(I3C6_REG1, 0x64) - FIELD(I3C6_REG1, I2C_MODE, 0, 1) - FIELD(I3C6_REG1, SA_EN, 15, 1) + FIELD(I3C6_REG1, I2C_MODE, 0, 1) + FIELD(I3C6_REG1, SLV_TEST_MODE, 1, 1) + FIELD(I3C6_REG1, ACT_MODE, 2, 2) + FIELD(I3C6_REG1, PENDING_INT, 4, 4) + FIELD(I3C6_REG1, SA, 8, 7) + FIELD(I3C6_REG1, SA_EN, 15, 1) + FIELD(I3C6_REG1, INST_ID, 16, 4)static uint64_t aspeed_i3c_read (void *opaque,hwaddr addr,unsigned int size) {
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
RE: [PATCH 05/19] hw/i3c/aspeed_i3c: Add more register fields
Quoted 87 lines
Subject: [PATCH 05/19] hw/i3c/aspeed_i3c: Add more register fields
Adds the rest of the Aspeed I3C controller register fields.
Signed-off-by Joe Komlodi <[email protected]>Reviewed-by Patrick Venture <[email protected]>--- hw/i3c/aspeed_i3c.c | 54 +++++++++++++++++++++++++++++++++++---------- 1 file changed, 42 insertions(+), 12 deletions(-)hw/i3c/aspeed_i3c.c index renamed from hw/i3c/aspeed_i3c.c +0
-0
cb0332828c..7a16dfec53100644hw/i3c/aspeed_i3c.c +42
-13@@ -21,28 +21,58 @@/* I3C Controller Registers */ REG32(I3C1_REG0, 0x10) REG32(I3C1_REG1, 0x14) - FIELD(I3C1_REG1, I2C_MODE, 0, 1) - FIELD(I3C1_REG1, SA_EN, 15, 1) + FIELD(I3C1_REG1, I2C_MODE, 0, 1) + FIELD(I3C1_REG1, SLV_TEST_MODE, 1, 1) + FIELD(I3C1_REG1, ACT_MODE, 2, 2) + FIELD(I3C1_REG1, PENDING_INT, 4, 4) + FIELD(I3C1_REG1, SA, 8, 7) + FIELD(I3C1_REG1, SA_EN, 15, 1) + FIELD(I3C1_REG1, INST_ID, 16, 4) REG32(I3C2_REG0, 0x20) REG32(I3C2_REG1, 0x24) - FIELD(I3C2_REG1, I2C_MODE, 0, 1) - FIELD(I3C2_REG1, SA_EN, 15, 1) + FIELD(I3C2_REG1, I2C_MODE, 0, 1) + FIELD(I3C2_REG1, SLV_TEST_MODE, 1, 1) + FIELD(I3C2_REG1, ACT_MODE, 2, 2) + FIELD(I3C2_REG1, PENDING_INT, 4, 4) + FIELD(I3C2_REG1, SA, 8, 7) + FIELD(I3C2_REG1, SA_EN, 15, 1) + FIELD(I3C2_REG1, INST_ID, 16, 4) REG32(I3C3_REG0, 0x30) REG32(I3C3_REG1, 0x34) - FIELD(I3C3_REG1, I2C_MODE, 0, 1) - FIELD(I3C3_REG1, SA_EN, 15, 1) + FIELD(I3C3_REG1, I2C_MODE, 0, 1) + FIELD(I3C3_REG1, SLV_TEST_MODE, 1, 1) + FIELD(I3C3_REG1, ACT_MODE, 2, 2) + FIELD(I3C3_REG1, PENDING_INT, 4, 4) + FIELD(I3C3_REG1, SA, 8, 7) + FIELD(I3C3_REG1, SA_EN, 15, 1) + FIELD(I3C3_REG1, INST_ID, 16, 4) REG32(I3C4_REG0, 0x40) REG32(I3C4_REG1, 0x44) - FIELD(I3C4_REG1, I2C_MODE, 0, 1) - FIELD(I3C4_REG1, SA_EN, 15, 1) + FIELD(I3C4_REG1, I2C_MODE, 0, 1) + FIELD(I3C4_REG1, SLV_TEST_MODE, 1, 1) + FIELD(I3C4_REG1, ACT_MODE, 2, 2) + FIELD(I3C4_REG1, PENDING_INT, 4, 4) + FIELD(I3C4_REG1, SA, 8, 7) + FIELD(I3C4_REG1, SA_EN, 15, 1) + FIELD(I3C4_REG1, INST_ID, 16, 4) REG32(I3C5_REG0, 0x50) REG32(I3C5_REG1, 0x54) - FIELD(I3C5_REG1, I2C_MODE, 0, 1) - FIELD(I3C5_REG1, SA_EN, 15, 1) + FIELD(I3C5_REG1, I2C_MODE, 0, 1) + FIELD(I3C5_REG1, SLV_TEST_MODE, 1, 1) + FIELD(I3C5_REG1, ACT_MODE, 2, 2) + FIELD(I3C5_REG1, PENDING_INT, 4, 4) + FIELD(I3C5_REG1, SA, 8, 7) + FIELD(I3C5_REG1, SA_EN, 15, 1) + FIELD(I3C5_REG1, INST_ID, 16, 4) REG32(I3C6_REG0, 0x60) REG32(I3C6_REG1, 0x64) - FIELD(I3C6_REG1, I2C_MODE, 0, 1) - FIELD(I3C6_REG1, SA_EN, 15, 1) + FIELD(I3C6_REG1, I2C_MODE, 0, 1) + FIELD(I3C6_REG1, SLV_TEST_MODE, 1, 1) + FIELD(I3C6_REG1, ACT_MODE, 2, 2) + FIELD(I3C6_REG1, PENDING_INT, 4, 4) + FIELD(I3C6_REG1, SA, 8, 7) + FIELD(I3C6_REG1, SA_EN, 15, 1) + FIELD(I3C6_REG1, INST_ID, 16, 4)static uint64_t aspeed_i3c_read (void *opaque,hwaddr addr,unsigned int size) { --
Quoted 1 line
2.50.0.rc1.591.g9c95f17f64-goog
Thanks,
Jamin
PATCH 6/19 hw/i3c/dw-i3c: Add more reset values
In reply to Joe KomlodiAdds reset values for the new registers added.
--- hw/i3c/dw-i3c.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)
hw/i3c/dw-i3c.c +19 -1
@@ -285,14 +285,32 @@ REG32(DEVICE_ADDR_TABLE_LOC1, 0x280) FIELD(DEVICE_ADDR_TABLE_LOC1, LEGACY_I2C_DEVICE, 31, 1)static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS ] = { - [R_HW_CAPABILITY ] =0x000e00bf , +/* Target mode is not supported, don't advertise it for now. */ + [R_HW_CAPABILITY ] =0x000e00b9 , [R_QUEUE_THLD_CTRL ] =0x01000101 , + [R_DATA_BUFFER_THLD_CTRL ] =0x01010100 , + [R_SLV_EVENT_CTRL ] =0x0000000b , + [R_QUEUE_STATUS_LEVEL ] =0x00000002 , + [R_DATA_BUFFER_STATUS_LEVEL ] =0x00000010 , + [R_PRESENT_STATE ] =0x00000003 , [R_I3C_VER_ID ] =0x3130302a , [R_I3C_VER_TYPE ] =0x6c633033 , [R_DEVICE_ADDR_TABLE_POINTER ] =0x00080280 , [R_DEV_CHAR_TABLE_POINTER ] =0x00020200 , + [R_SLV_CHAR_CTRL ] =0x00010000 , [A_VENDOR_SPECIFIC_REG_POINTER ] =0x000000b0 , [R_SLV_MAX_LEN ] =0x00ff00ff , + [R_SLV_TSX_SYMBL_TIMING ] =0x0000003f , + [R_SCL_I3C_OD_TIMING ] =0x000a0010 , + [R_SCL_I3C_PP_TIMING ] =0x000a000a , + [R_SCL_I2C_FM_TIMING ] =0x00100010 , + [R_SCL_I2C_FMP_TIMING ] =0x00100010 , + [R_SCL_EXT_LCNT_TIMING ] =0x20202020 , + [R_SCL_EXT_TERMN_LCNT_TIMING ] =0x00300000 , + [R_BUS_FREE_TIMING ] =0x00200020 , + [R_BUS_IDLE_TIMING ] =0x00000020 , + [R_EXTENDED_CAPABILITY ] =0x00000239 , + [R_SLAVE_CONFIG ] =0x00000023 , };static uint64_t dw_i3c_read (void *opaque,hwaddr offset,unsigned size)
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
RE: [PATCH 06/19] hw/i3c/dw-i3c: Add more reset values
Quoted 50 lines
Subject: [PATCH 06/19] hw/i3c/dw-i3c: Add more reset values
Adds reset values for the new registers added.
Signed-off-by Joe Komlodi <[email protected]>Reviewed-by Patrick Venture <[email protected]>--- hw/i3c/dw-i3c.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)hw/i3c/dw-i3c.c index b252903ea4..845fbd5efd renamed from hw/i3c/dw-i3c.c +0
-0100644
hw/i3c/dw-i3c.c +19
-2@@ -285,14 +285,32 @@ REG32(DEVICE_ADDR_TABLE_LOC1, 0x280) FIELD(DEVICE_ADDR_TABLE_LOC1, LEGACY_I2C_DEVICE, 31, 1)static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS ] = { - [R_HW_CAPABILITY ] =0x000e00bf , +/* Target mode is not supported, don't advertise it for now. */ + [R_HW_CAPABILITY ] =0x000e00b9 , [R_QUEUE_THLD_CTRL ] =0x01000101 , + [R_DATA_BUFFER_THLD_CTRL ] =0x01010100 , + [R_SLV_EVENT_CTRL ] =0x0000000b , + [R_QUEUE_STATUS_LEVEL ] =0x00000002 , + [R_DATA_BUFFER_STATUS_LEVEL ] =0x00000010 , + [R_PRESENT_STATE ] =0x00000003 , [R_I3C_VER_ID ] =0x3130302a , [R_I3C_VER_TYPE ] =0x6c633033 , [R_DEVICE_ADDR_TABLE_POINTER ] =0x00080280 , [R_DEV_CHAR_TABLE_POINTER ] =0x00020200 , + [R_SLV_CHAR_CTRL ] =0x00010000 , [A_VENDOR_SPECIFIC_REG_POINTER ] =0x000000b0 , [R_SLV_MAX_LEN ] =0x00ff00ff , + [R_SLV_TSX_SYMBL_TIMING ] =0x0000003f , + [R_SCL_I3C_OD_TIMING ] =0x000a0010 , + [R_SCL_I3C_PP_TIMING ] =0x000a000a , + [R_SCL_I2C_FM_TIMING ] =0x00100010 , + [R_SCL_I2C_FMP_TIMING ] =0x00100010 , + [R_SCL_EXT_LCNT_TIMING ] =0x20202020 , + [R_SCL_EXT_TERMN_LCNT_TIMING ] =0x00300000 , + [R_BUS_FREE_TIMING ] =0x00200020 , + [R_BUS_IDLE_TIMING ] =0x00000020 , + [R_EXTENDED_CAPABILITY ] =0x00000239 , + [R_SLAVE_CONFIG ] =0x00000023 , };static uint64_t dw_i3c_read (void *opaque,hwaddr offset,unsigned size) --
Quoted 1 line
2.50.0.rc1.591.g9c95f17f64-goog
Thanks,
Jamin
RE: [PATCH 06/19] hw/i3c/dw-i3c: Add more reset values
Hi Joe,
Quoted 30 lines
Subject: RE: [PATCH 06/19] hw/i3c/dw-i3c: Add more reset values
Quoted 28 lines
Subject: [PATCH 06/19] hw/i3c/dw-i3c: Add more reset values
Adds reset values for the new registers added.
Signed-off-by Joe Komlodi <[email protected]>Reviewed-by Patrick Venture <[email protected]>--- hw/i3c/dw-i3c.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)hw/i3c/dw-i3c.c index b252903ea4..845fbd5efd renamed from hw/i3c/dw-i3c.c +0
-0100644
hw/i3c/dw-i3c.c +7
-1@@ -285,14 +285,32 @@ REG32(DEVICE_ADDR_TABLE_LOC1, 0x280) FIELD(DEVICE_ADDR_TABLE_LOC1, LEGACY_I2C_DEVICE, 31, 1)static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS ] = { - [R_HW_CAPABILITY ] =0x000e00bf , +/* Target mode is not supported, don't advertise it for now. */ + [R_HW_CAPABILITY ] =0x000e00b9 , [R_QUEUE_THLD_CTRL ] =0x01000101 , + [R_DATA_BUFFER_THLD_CTRL ] =0x01010100 , + [R_SLV_EVENT_CTRL ] =0x0000000b , + [R_QUEUE_STATUS_LEVEL ] =0x00000002 , + [R_DATA_BUFFER_STATUS_LEVEL ] =0x00000010 , + [R_PRESENT_STATE ] =0x00000003 ,
Quoted 8 lines
hw/i3c/dw-i3c.c REG32(DEVICE_ADDR_TABLE_LOC1, 0x280) · line 303
Quoted 8 lines
hw/i3c/dw-i3c.c +2
-0[R_I3C_VER_ID] = 0x3130302a, [R_I3C_VER_TYPE] = 0x6c633033, [R_DEVICE_ADDR_TABLE_POINTER] = 0x00080280, [R_DEV_CHAR_TABLE_POINTER] = 0x00020200, + [R_SLV_CHAR_CTRL] = 0x00010000, [A_VENDOR_SPECIFIC_REG_POINTER] = 0x000000b0, [R_SLV_MAX_LEN] = 0x00ff00ff, + [R_SLV_TSX_SYMBL_TIMING] = 0x0000003f,
I don’t see this register defined in the datasheet. Which document are you referencing for this member?
Quoted 9 lines
hw/i3c/dw-i3c.c REG32(DEVICE_ADDR_TABLE_LOC1, 0x280) · line 312
Quoted 9 lines
hw/i3c/dw-i3c.c +9
-0+ [R_SCL_I3C_OD_TIMING] = 0x000a0010, + [R_SCL_I3C_PP_TIMING] = 0x000a000a, + [R_SCL_I2C_FM_TIMING] = 0x00100010, + [R_SCL_I2C_FMP_TIMING] = 0x00100010, + [R_SCL_EXT_LCNT_TIMING] = 0x20202020, + [R_SCL_EXT_TERMN_LCNT_TIMING] = 0x00300000, + [R_BUS_FREE_TIMING] = 0x00200020, + [R_BUS_IDLE_TIMING] = 0x00000020, + [R_EXTENDED_CAPABILITY] = 0x00000239,
I don’t see this register defined in the datasheet. Which document are you referencing for this member?
Quoted 1 line
hw/i3c/dw-i3c.c REG32(DEVICE_ADDR_TABLE_LOC1, 0x280) · line 313
Quoted 1 line
hw/i3c/dw-i3c.c +1
-0+ [R_SLAVE_CONFIG] = 0x00000023,
I don’t see this register defined in the datasheet. Which document are you referencing for this member?
Quoted 10 lines
Quoted 5 lines
hw/i3c/dw-i3c.c +0
-1};static uint64_t dw_i3c_read (void *opaque,hwaddr offset,unsigned size) --2.50.0.rc1.591.g9c95f17f64-goog
Reviewed-by Jamin Lin <[email protected]>Thanks,
Jamin
PATCH 7/19 hw/i3c/aspeed_i3c: Add register RO field masks
In reply to Joe KomlodiAdds read-only register masks for the Aspeed I3C controller registers.
--- hw/i3c/aspeed_i3c.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
hw/i3c/aspeed_i3c.c +16 -0
@@ -74,6 +74,21 @@ REG32(I3C6_REG1, 0x64) FIELD(I3C6_REG1, SA_EN, 15, 1) FIELD(I3C6_REG1, INST_ID, 16, 4) +static const uint32_t ast2600_i3c_controller_ro[ASPEED_I3C_NR_REGS ] = { + [R_I3C1_REG0 ] =0xfc000000 , + [R_I3C1_REG1 ] =0xfff00000 , + [R_I3C2_REG0 ] =0xfc000000 , + [R_I3C2_REG1 ] =0xfff00000 , + [R_I3C3_REG0 ] =0xfc000000 , + [R_I3C3_REG1 ] =0xfff00000 , + [R_I3C4_REG0 ] =0xfc000000 , + [R_I3C4_REG1 ] =0xfff00000 , + [R_I3C5_REG0 ] =0xfc000000 , + [R_I3C5_REG1 ] =0xfff00000 , + [R_I3C6_REG0 ] =0xfc000000 , + [R_I3C6_REG1 ] =0xfff00000 , +}; +static uint64_t aspeed_i3c_read (void *opaque,hwaddr addr,unsigned int size) {AspeedI3CState *s =ASPEED_I3C (opaque);
@@ -97,6 +112,7 @@ static void aspeed_i3c_write(void *opaque, addr >>=2 ; + data &= ~ast2600_i3c_controller_ro[addr];/* I3C controller register */ switch (addr) {case R_I3C1_REG1 :
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
RE: [PATCH 07/19] hw/i3c/aspeed_i3c: Add register RO field masks
Hi Joe,
Quoted 16 lines
Subject: [PATCH 07/19] hw/i3c/aspeed_i3c: Add register RO field masks
Adds read-only register masks for the Aspeed I3C controller registers.
Signed-off-by Joe Komlodi <[email protected]>Reviewed-by Patrick Venture <[email protected]>--- hw/i3c/aspeed_i3c.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)hw/i3c/aspeed_i3c.c index renamed from hw/i3c/aspeed_i3c.c +0
-0
7a16dfec53..1ad25e5a00100644
hw/i3c/aspeed_i3c.c REG32(I3C6_REG1, 0x64) · line 78
Quoted 5 lines
hw/i3c/aspeed_i3c.c +2
-0@@ -74,6 +74,21 @@ REG32(I3C6_REG1, 0x64) FIELD(I3C6_REG1, SA_EN, 15, 1) FIELD(I3C6_REG1, INST_ID, 16, 4) +static const uint32_t ast2600_i3c_controller_ro[ASPEED_I3C_NR_REGS ] = { + [R_I3C1_REG0 ] =0xfc000000 ,
According to the datasheet, bits [29:28] are defined as RW (SDA_PULLUP_EN). Why are these bits being masked as read-only?
hw/i3c/aspeed_i3c.c REG32(I3C6_REG1, 0x64) · line 79
Quoted 1 line
hw/i3c/aspeed_i3c.c +1
-0+ [R_I3C1_REG1] = 0xfff00000,
According to the datasheet, bits [31:0] are all RW. Why are bits [31:20] being treated as read-only?
The same questions apply to I3C2 through I3C6.
Thanks-Jamin
Quoted 25 lines
hw/i3c/aspeed_i3c.c +12
-0+ [R_I3C2_REG0] = 0xfc000000, + [R_I3C2_REG1] = 0xfff00000, + [R_I3C3_REG0] = 0xfc000000, + [R_I3C3_REG1] = 0xfff00000, + [R_I3C4_REG0] = 0xfc000000, + [R_I3C4_REG1] = 0xfff00000, + [R_I3C5_REG0] = 0xfc000000, + [R_I3C5_REG1] = 0xfff00000, + [R_I3C6_REG0] = 0xfc000000, + [R_I3C6_REG1] = 0xfff00000, +}; +static uint64_t aspeed_i3c_read (void *opaque,hwaddr addr,unsigned int size) { AspeedI3CState *s = ASPEED_I3C(opaque); @@ -97,6 +112,7 @@ staticvoid aspeed_i3c_write(void *opaque,
addr >>= 2;+ data &= ~ast2600_i3c_controller_ro[addr]; /* I3C controller register */ switch (addr) { case R_I3C1_REG1:--
2.50.0.rc1.591.g9c95f17f64-goog
PATCH 8/19 hw/i3c/dw-i3c: Add register RO field masks
In reply to Joe KomlodiAdds read-only register masks for the DwC I3C controller.
--- hw/i3c/dw-i3c.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)
hw/i3c/dw-i3c.c +40 -0
@@ -313,6 +313,45 @@ static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS] = { [R_SLAVE_CONFIG] = 0x00000023, }; +static const uint32_t dw_i3c_ro[DW_I3C_NR_REGS ] = { + [R_DEVICE_CTRL ] =0x04fffe00 , + [R_DEVICE_ADDR ] =0x7f807f80 , + [R_HW_CAPABILITY ] =0xffffffff , + [R_IBI_QUEUE_STATUS ] =0xffffffff , + [R_DATA_BUFFER_THLD_CTRL ] =0xf8f8f8f8 , + [R_IBI_QUEUE_CTRL ] =0xfffffff0 , + [R_RESET_CTRL ] =0xffffffc0 , + [R_SLV_EVENT_CTRL ] =0xffffff3f , + [R_INTR_STATUS ] =0xffff809f , + [R_INTR_STATUS_EN ] =0xffff8080 , + [R_INTR_SIGNAL_EN ] =0xffff8080 , + [R_INTR_FORCE ] =0xffff8000 , + [R_QUEUE_STATUS_LEVEL ] =0xffffffff , + [R_DATA_BUFFER_STATUS_LEVEL ] =0xffffffff , + [R_PRESENT_STATE ] =0xffffffff , + [R_CCC_DEVICE_STATUS ] =0xffffffff , + [R_I3C_VER_ID ] =0xffffffff , + [R_I3C_VER_TYPE ] =0xffffffff , + [R_DEVICE_ADDR_TABLE_POINTER ] =0xffffffff , + [R_DEV_CHAR_TABLE_POINTER ] =0xffcbffff , + [R_SLV_PID_VALUE ] =0xffff0fff , + [R_SLV_CHAR_CTRL ] =0xffffffff , + [A_VENDOR_SPECIFIC_REG_POINTER ] =0xffffffff , + [R_SLV_MAX_LEN ] =0xffffffff , + [R_MAX_READ_TURNAROUND ] =0xffffffff , + [R_MAX_DATA_SPEED ] =0xffffffff , + [R_SLV_INTR_REQ ] =0xfffffff0 , + [R_SLV_TSX_SYMBL_TIMING ] =0xffffffc0 , + [R_DEVICE_CTRL_EXTENDED ] =0xfffffff8 , + [R_SCL_I3C_OD_TIMING ] =0xff00ff00 , + [R_SCL_I3C_PP_TIMING ] =0xff00ff00 , + [R_SCL_I2C_FMP_TIMING ] =0xff000000 , + [R_SCL_EXT_TERMN_LCNT_TIMING ] =0x0000fff0 , + [R_BUS_IDLE_TIMING ] =0xfff00000 , + [R_EXTENDED_CAPABILITY ] =0xffffffff , + [R_SLAVE_CONFIG ] =0xffffffff , +}; +static uint64_t dw_i3c_read (void *opaque,hwaddr offset,unsigned size) {DWI3C *s =DW_I3C (opaque);
@@ -341,6 +380,7 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,trace_dw_i3c_write (s->id, offset, value); + value &= ~dw_i3c_ro[addr];switch (addr) {case R_HW_CAPABILITY :case R_RESPONSE_QUEUE_PORT :
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
RE: [PATCH 08/19] hw/i3c/dw-i3c: Add register RO field masks
Hi Joe,
Quoted 62 lines
Subject: [PATCH 08/19] hw/i3c/dw-i3c: Add register RO field masks
Adds read-only register masks for the DwC I3C controller.
Signed-off-by Joe Komlodi <[email protected]>Reviewed-by Patrick Venture <[email protected]>--- hw/i3c/dw-i3c.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)hw/i3c/dw-i3c.c index 845fbd5efd..4f40f999f4 renamed from hw/i3c/dw-i3c.c +0
-0100644
hw/i3c/dw-i3c.c +39
-0@@ -313,6 +313,45 @@ static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS] = { [R_SLAVE_CONFIG] = 0x00000023, }; +static const uint32_t dw_i3c_ro[DW_I3C_NR_REGS ] = { + [R_DEVICE_CTRL ] =0x04fffe00 , + [R_DEVICE_ADDR ] =0x7f807f80 , + [R_HW_CAPABILITY ] =0xffffffff , + [R_IBI_QUEUE_STATUS ] =0xffffffff , + [R_DATA_BUFFER_THLD_CTRL ] =0xf8f8f8f8 , + [R_IBI_QUEUE_CTRL ] =0xfffffff0 , + [R_RESET_CTRL ] =0xffffffc0 , + [R_SLV_EVENT_CTRL ] =0xffffff3f , + [R_INTR_STATUS ] =0xffff809f , + [R_INTR_STATUS_EN ] =0xffff8080 , + [R_INTR_SIGNAL_EN ] =0xffff8080 , + [R_INTR_FORCE ] =0xffff8000 , + [R_QUEUE_STATUS_LEVEL ] =0xffffffff , + [R_DATA_BUFFER_STATUS_LEVEL ] =0xffffffff , + [R_PRESENT_STATE ] =0xffffffff , + [R_CCC_DEVICE_STATUS ] =0xffffffff , + [R_I3C_VER_ID ] =0xffffffff , + [R_I3C_VER_TYPE ] =0xffffffff , + [R_DEVICE_ADDR_TABLE_POINTER ] =0xffffffff , + [R_DEV_CHAR_TABLE_POINTER ] =0xffcbffff , + [R_SLV_PID_VALUE ] =0xffff0fff , + [R_SLV_CHAR_CTRL ] =0xffffffff , + [A_VENDOR_SPECIFIC_REG_POINTER ] =0xffffffff , + [R_SLV_MAX_LEN ] =0xffffffff , + [R_MAX_READ_TURNAROUND ] =0xffffffff , + [R_MAX_DATA_SPEED ] =0xffffffff , + [R_SLV_INTR_REQ ] =0xfffffff0 , + [R_SLV_TSX_SYMBL_TIMING ] =0xffffffc0 , + [R_DEVICE_CTRL_EXTENDED ] =0xfffffff8 , + [R_SCL_I3C_OD_TIMING ] =0xff00ff00 , + [R_SCL_I3C_PP_TIMING ] =0xff00ff00 , + [R_SCL_I2C_FMP_TIMING ] =0xff000000 , + [R_SCL_EXT_TERMN_LCNT_TIMING ] =0x0000fff0 , + [R_BUS_IDLE_TIMING ] =0xfff00000 , + [R_EXTENDED_CAPABILITY ] =0xffffffff , + [R_SLAVE_CONFIG ] =0xffffffff , +}; +static uint64_t dw_i3c_read (void *opaque,hwaddr offset,unsigned size) {DWI3C *s =DW_I3C (opaque);
hw/i3c/dw-i3c.c static void dw_i3c_write(void *opaque, hwaddr offset, · line 385
Quoted 6 lines
hw/i3c/dw-i3c.c +1
-0@@ -341,6 +380,7 @@ static void dw_i3c_write(void *opaque, hwaddr offset,uint64_t value, trace_dw_i3c_write(s->id, offset, value); + value &= ~dw_i3c_ro[addr];switch (addr) {
The following registers are read-only, and the code already checks their access based solely on the register address. Why do we still need to define them in dw_i3c_ro?
case R_HW_CAPABILITY:
case R_RESPONSE_QUEUE_PORT:
case R_IBI_QUEUE_DATA:
case R_QUEUE_STATUS_LEVEL:
case R_PRESENT_STATE:
case R_CCC_DEVICE_STATUS:
case R_DEVICE_ADDR_TABLE_POINTER:
case R_VENDOR_SPECIFIC_REG_POINTER:
case R_SLV_CHAR_CTRL:
case R_SLV_MAX_LEN:
case R_MAX_READ_TURNAROUND:
case R_I3C_VER_ID:
case R_I3C_VER_TYPE:
case R_EXTENDED_CAPABILITY:Thanks-Jamin
Quoted 4 lines
hw/i3c/dw-i3c.c +0
-0case R_HW_CAPABILITY :case
R_RESPONSE_QUEUE_PORT:
--
2.50.0.rc1.591.g9c95f17f64-goog
RE: [PATCH 08/19] hw/i3c/dw-i3c: Add register RO field masks
Hi Joe,
Quoted 46 lines
Subject: RE: [PATCH 08/19] hw/i3c/dw-i3c: Add register RO field masks
Hi Joe,
Quoted 42 lines
Subject: [PATCH 08/19] hw/i3c/dw-i3c: Add register RO field masks
Adds read-only register masks for the DwC I3C controller.
Signed-off-by Joe Komlodi <[email protected]>Reviewed-by Patrick Venture <[email protected]>--- hw/i3c/dw-i3c.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)hw/i3c/dw-i3c.c index renamed from hw/i3c/dw-i3c.c +0
-0
845fbd5efd..4f40f999f4
100644hw/i3c/dw-i3c.c +21
-0@@ -313,6 +313,45 @@ static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS] = { [R_SLAVE_CONFIG] = 0x00000023, }; +static const uint32_t dw_i3c_ro[DW_I3C_NR_REGS ] = { + [R_DEVICE_CTRL ] =0x04fffe00 , + [R_DEVICE_ADDR ] =0x7f807f80 , + [R_HW_CAPABILITY ] =0xffffffff , + [R_IBI_QUEUE_STATUS ] =0xffffffff , + [R_DATA_BUFFER_THLD_CTRL ] =0xf8f8f8f8 , + [R_IBI_QUEUE_CTRL ] =0xfffffff0 , + [R_RESET_CTRL ] =0xffffffc0 , + [R_SLV_EVENT_CTRL ] =0xffffff3f , + [R_INTR_STATUS ] =0xffff809f , + [R_INTR_STATUS_EN ] =0xffff8080 , + [R_INTR_SIGNAL_EN ] =0xffff8080 , + [R_INTR_FORCE ] =0xffff8000 , + [R_QUEUE_STATUS_LEVEL ] =0xffffffff , + [R_DATA_BUFFER_STATUS_LEVEL ] =0xffffffff , + [R_PRESENT_STATE ] =0xffffffff , + [R_CCC_DEVICE_STATUS ] =0xffffffff , + [R_I3C_VER_ID ] =0xffffffff , + [R_I3C_VER_TYPE ] =0xffffffff , + [R_DEVICE_ADDR_TABLE_POINTER ] =0xffffffff , + [R_DEV_CHAR_TABLE_POINTER ] =0xffcbffff ,
Quoted 8 lines
hw/i3c/dw-i3c.c static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS] = { · line 344
Quoted 8 lines
hw/i3c/dw-i3c.c +8
-0+ [R_SLV_PID_VALUE] = 0xffff0fff, + [R_SLV_CHAR_CTRL] = 0xffffffff, + [A_VENDOR_SPECIFIC_REG_POINTER] = 0xffffffff, + [R_SLV_MAX_LEN] = 0xffffffff, + [R_MAX_READ_TURNAROUND] = 0xffffffff, + [R_MAX_DATA_SPEED] = 0xffffffff, + [R_SLV_INTR_REQ] = 0xfffffff0, + [R_SLV_TSX_SYMBL_TIMING] = 0xffffffc0,
I don’t see this register defined in the datasheet. Which document are you referencing for this member?
Quoted 7 lines
hw/i3c/dw-i3c.c static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS] = { · line 351
Quoted 7 lines
hw/i3c/dw-i3c.c +7
-0+ [R_DEVICE_CTRL_EXTENDED] = 0xfffffff8, + [R_SCL_I3C_OD_TIMING] = 0xff00ff00, + [R_SCL_I3C_PP_TIMING] = 0xff00ff00, + [R_SCL_I2C_FMP_TIMING] = 0xff000000, + [R_SCL_EXT_TERMN_LCNT_TIMING] = 0x0000fff0, + [R_BUS_IDLE_TIMING] = 0xfff00000, + [R_EXTENDED_CAPABILITY] = 0xffffffff,
I don’t see this register defined in the datasheet. Which document are you referencing for this member?
Quoted 1 line
hw/i3c/dw-i3c.c static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS] = { · line 352
Quoted 1 line
hw/i3c/dw-i3c.c +1
-0+ [R_SLAVE_CONFIG] = 0xffffffff,
I don’t see this register defined in the datasheet. Which document are you referencing for this member?
Quoted 38 lines
hw/i3c/dw-i3c.c static const uint32_t dw_i3c_resets[DW_I3C_NR_REGS] = { · line 355
Quoted 3 lines
hw/i3c/dw-i3c.c +2
-0+}; +static uint64_t dw_i3c_read (void *opaque,hwaddr offset,unsigned size){
hw/i3c/dw-i3c.c static void dw_i3c_write(void *opaque, hwaddr · line 385
Quoted 8 lines
hw/i3c/dw-i3c.c +1
-0DWI3C *s =DW_I3C (opaque);@@ -341,6 +380,7 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,trace_dw_i3c_write (s->id, offset, value); + value &= ~dw_i3c_ro[addr];switch (addr) {The following registers are read-only, and the code already checks their access based solely on the register address.
Why do we still need to define them indw_i3c_ro?case R_HW_CAPABILITY: case R_RESPONSE_QUEUE_PORT: case R_IBI_QUEUE_DATA: case R_QUEUE_STATUS_LEVEL: case R_PRESENT_STATE: case R_CCC_DEVICE_STATUS: case R_DEVICE_ADDR_TABLE_POINTER: case R_VENDOR_SPECIFIC_REG_POINTER: case R_SLV_CHAR_CTRL: case R_SLV_MAX_LEN: case R_MAX_READ_TURNAROUND: case R_I3C_VER_ID: case R_I3C_VER_TYPE: case R_EXTENDED_CAPABILITY:Thanks-Jamin
Quoted 4 lines
hw/i3c/dw-i3c.c +0
-0case R_HW_CAPABILITY :case
R_RESPONSE_QUEUE_PORT:
--
2.50.0.rc1.591.g9c95f17f64-goog
PATCH 9/19 hw/i3c/dw-i3c: Treat more registers as read-as-zero
In reply to Joe KomlodiRESET_CTRL and INTR_FORCE are write-only.
--- hw/i3c/dw-i3c.c | 3 +++ 1 file changed, 3 insertions(+)
hw/i3c/dw-i3c.c +3 -0
@@ -359,7 +359,10 @@ static uint64_t dw_i3c_read(void *opaque, hwaddr offset, unsigned size)uint64_t value;switch (addr) { +/* RAZ */ case R_COMMAND_QUEUE_PORT : +case R_RESET_CTRL : +case R_INTR_FORCE : value =0 ;break ;default :
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
RE: [PATCH 09/19] hw/i3c/dw-i3c: Treat more registers as read-as-zero
Quoted 26 lines
Subject: [PATCH 09/19] hw/i3c/dw-i3c: Treat more registers as read-as-zero
RESET_CTRLandINTR_FORCEare write-only.Signed-off-by Joe Komlodi <[email protected]>Reviewed-by Patrick Venture <[email protected]>--- hw/i3c/dw-i3c.c | 3 +++ 1 file changed, 3 insertions(+)hw/i3c/dw-i3c.c index 4f40f999f4..bf51c00935 renamed from hw/i3c/dw-i3c.c +0
-0100644
hw/i3c/dw-i3c.c +3
-0@@ -359,7 +359,10 @@ static uint64_t dw_i3c_read(void *opaque, hwaddr offset, unsigned size)uint64_t value;switch (addr) { +/* RAZ */ case R_COMMAND_QUEUE_PORT : +case R_RESET_CTRL : +case R_INTR_FORCE : value =0 ;break ;
Quoted 3 lines
default:
--
2.50.0.rc1.591.g9c95f17f64-goog
Thanks,
Jamin
PATCH 10/19 hw/i3c/dw-i3c: Use 32 bits on MMIO writes
In reply to Joe KomlodiThe registers are only 32 bits wide, so we should cast the 64-bit value passed in to only be 32 bits wide.
--- hw/i3c/dw-i3c.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
hw/i3c/dw-i3c.c +3 -2
@@ -380,10 +380,11 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value, {DWI3C *s =DW_I3C (opaque);uint32_t addr = offset >>2 ; +uint32_t val32 = (uint32_t )value;trace_dw_i3c_write (s->id, offset, value); - value &= ~dw_i3c_ro[addr]; + val32 &= ~dw_i3c_ro[addr];switch (addr) {case R_HW_CAPABILITY :case R_RESPONSE_QUEUE_PORT :
@@ -409,7 +410,7 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,case R_RESET_CTRL :break ;default : - s->regs[addr] = value; + s->regs[addr] = val32;break ; } }
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
RE: [PATCH 10/19] hw/i3c/dw-i3c: Use 32 bits on MMIO writes
Quoted 39 lines
Subject: [PATCH 10/19] hw/i3c/dw-i3c: Use 32 bits on MMIO writes
The registers are only 32 bits wide, so we should cast the 64-bit value passed in to only be 32 bits wide.
Signed-off-by Joe Komlodi <[email protected]>Reviewed-by Patrick Venture <[email protected]>Reviewed-by Titus Rwantare <[email protected]>--- hw/i3c/dw-i3c.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)hw/i3c/dw-i3c.c index bf51c00935..ecd79aba8c renamed from hw/i3c/dw-i3c.c +0
-0100644
hw/i3c/dw-i3c.c +3
-2@@ -380,10 +380,11 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value, {DWI3C *s =DW_I3C (opaque);uint32_t addr = offset >>2 ; +uint32_t val32 = (uint32_t )value;trace_dw_i3c_write (s->id, offset, value); - value &= ~dw_i3c_ro[addr]; + val32 &= ~dw_i3c_ro[addr];switch (addr) {case R_HW_CAPABILITY :case R_RESPONSE_QUEUE_PORT :@@ -409,7 +410,7 @@ static void dw_i3c_write(void *opaque, hwaddr offset,uint64_t value, case R_RESET_CTRL: break;default : - s->regs[addr] = value; + s->regs[addr] = val32;break ; }
Quoted 3 lines
}
--
2.50.0.rc1.591.g9c95f17f64-goog
Thanks,
Jamin
PATCH 11/19 hw/i3c/dw-i3c: Add IRQ MMIO behavior
In reply to Joe Komlodi--- hw/i3c/dw-i3c.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+)
hw/i3c/dw-i3c.c +56 -0
@@ -17,6 +17,7 @@#include "qapi/error.h" #include "migration/vmstate.h" #include "trace.h" +#include "hw/irq.h" REG32(DEVICE_CTRL, 0x00)FIELD (DEVICE_CTRL ,I3C_BROADCAST_ADDR_INC ,0 ,1 )
@@ -352,6 +353,46 @@ static const uint32_t dw_i3c_ro[DW_I3C_NR_REGS] = { [R_SLAVE_CONFIG] = 0xffffffff, }; +static void dw_i3c_update_irq (DWI3C *s) +{ +bool level = !!(s->regs[R_INTR_SIGNAL_EN ] & s->regs[R_INTR_STATUS ]); +qemu_set_irq (s->irq, level); +} + +static uint32_t dw_i3c_intr_status_r (DWI3C *s) +{ +/* Only return the status whose corresponding EN bits are set. */ +return s->regs[R_INTR_STATUS ] & s->regs[R_INTR_STATUS_EN ]; +} + +static void dw_i3c_intr_status_w (DWI3C *s,uint32_t val) +{ +/* INTR_STATUS[13:5] is w1c, other bits are RO. */ + val &=0x3fe0 ; + s->regs[R_INTR_STATUS ] &= ~val; + +dw_i3c_update_irq (s); +} + +static void dw_i3c_intr_status_en_w (DWI3C *s,uint32_t val) +{ + s->regs[R_INTR_STATUS_EN ] = val; +dw_i3c_update_irq (s); +} + +static void dw_i3c_intr_signal_en_w (DWI3C *s,uint32_t val) +{ + s->regs[R_INTR_SIGNAL_EN ] = val; +dw_i3c_update_irq (s); +} + +static void dw_i3c_intr_force_w (DWI3C *s,uint32_t val) +{ +/* INTR_FORCE is WO, just set the corresponding INTR_STATUS bits. */ + s->regs[R_INTR_STATUS ] = val; +dw_i3c_update_irq (s); +} +static uint64_t dw_i3c_read (void *opaque,hwaddr offset,unsigned size) {DWI3C *s =DW_I3C (opaque);
@@ -365,6 +406,9 @@ static uint64_t dw_i3c_read(void *opaque, hwaddr offset, unsigned size)case R_INTR_FORCE : value =0 ;break ; +case R_INTR_STATUS : + value =dw_i3c_intr_status_r (s); +break ;default : value = s->regs[addr];break ;
@@ -409,6 +453,18 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,break ;case R_RESET_CTRL :break ; +case R_INTR_STATUS : +dw_i3c_intr_status_w (s, val32); +break ; +case R_INTR_STATUS_EN : +dw_i3c_intr_status_en_w (s, val32); +break ; +case R_INTR_SIGNAL_EN : +dw_i3c_intr_signal_en_w (s, val32); +break ; +case R_INTR_FORCE : +dw_i3c_intr_force_w (s, val32); +break ;default : s->regs[addr] = val32;break ;
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
RE: [PATCH 11/19] hw/i3c/dw-i3c: Add IRQ MMIO behavior
Quoted 94 lines
Subject: [PATCH 11/19] hw/i3c/dw-i3c: Add IRQ MMIO behavior
Signed-off-by Joe Komlodi <[email protected]>Reviewed-by Patrick Venture <[email protected]>Reviewed-by Hao Wu <[email protected]>--- hw/i3c/dw-i3c.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+)hw/i3c/dw-i3c.c index ecd79aba8c..c58e12964c renamed from hw/i3c/dw-i3c.c +0
-0100644
hw/i3c/dw-i3c.c +37
-0@@ -17,6 +17,7 @@#include "qapi/error.h" #include "migration/vmstate.h" #include "trace.h" +#include "hw/irq.h" REG32(DEVICE_CTRL, 0x00)FIELD (DEVICE_CTRL ,I3C_BROADCAST_ADDR_INC ,0 ,1 )@@ -352,6 +353,46 @@ static const uint32_t dw_i3c_ro[DW_I3C_NR_REGS] = { [R_SLAVE_CONFIG] = 0xffffffff, }; +static void dw_i3c_update_irq (DWI3C *s) { +bool level = !!(s->regs[R_INTR_SIGNAL_EN ] & s->regs[R_INTR_STATUS ]); +qemu_set_irq (s->irq, level); +} + +static uint32_t dw_i3c_intr_status_r (DWI3C *s) { +/* Only return the status whose corresponding EN bits are set. */ +return s->regs[R_INTR_STATUS ] & s->regs[R_INTR_STATUS_EN ]; } + +static void dw_i3c_intr_status_w (DWI3C *s,uint32_t val) { +/* INTR_STATUS[13:5] is w1c, other bits are RO. */ + val &=0x3fe0 ; + s->regs[R_INTR_STATUS ] &= ~val; + +dw_i3c_update_irq (s); +} + +static void dw_i3c_intr_status_en_w (DWI3C *s,uint32_t val) { + s->regs[R_INTR_STATUS_EN ] = val; +dw_i3c_update_irq (s); +} + +static void dw_i3c_intr_signal_en_w (DWI3C *s,uint32_t val) { + s->regs[R_INTR_SIGNAL_EN ] = val; +dw_i3c_update_irq (s); +} + +static void dw_i3c_intr_force_w (DWI3C *s,uint32_t val) { +/* INTR_FORCE is WO, just set the corresponding INTR_STATUS bits. */ + s->regs[R_INTR_STATUS ] = val; +dw_i3c_update_irq (s); +} +static uint64_t dw_i3c_read (void *opaque,hwaddr offset,unsigned size) {DWI3C *s =DW_I3C (opaque);@@ -365,6 +406,9 @@ static uint64_t dw_i3c_read(void *opaque, hwaddr offset, unsigned size)case R_INTR_FORCE : value =0 ;break ; +case R_INTR_STATUS : + value =dw_i3c_intr_status_r (s); +break ;default : value = s->regs[addr];break;hw/i3c/dw-i3c.c +12
-0@@ -409,6 +453,18 @@ static void dw_i3c_write(void *opaque, hwaddr offset,uint64_t value, break;case R_RESET_CTRL :break ; +case R_INTR_STATUS : +dw_i3c_intr_status_w (s, val32); +break ; +case R_INTR_STATUS_EN : +dw_i3c_intr_status_en_w (s, val32); +break ; +case R_INTR_SIGNAL_EN : +dw_i3c_intr_signal_en_w (s, val32); +break ; +case R_INTR_FORCE : +dw_i3c_intr_force_w (s, val32); +break ;default : s->regs[addr] = val32;break;
Quoted 2 lines
--
2.50.0.rc1.591.g9c95f17f64-goog
Thanks,
Jamin
PATCH 12/19 hw/i3c/dw-i3c: Add data TX and RX
In reply to Joe KomlodiThis adds data and CCC transmission, reception, and the associated queues required for data transmission and reception to happen.
The I3C controller transmits data by the user writing into a command queue. When the queue has a command and an argument in it, the controller starts executing the command.
The controller can execute 1 of 3 ways:
1. A larger data transfer that involves using the TX and RX queues. This is the most common way the controller does transactions.
2. A small data transfer that involves sending a couple bytes passed into the command queue argument.
3. An address assignment command. This is how the controller does ENTDAA. When ENTDAA succeeds in assigning an address to a target, it updates the controller's char table with the target's PID, BCR, and DCR.
The controller determines what addresses to send by looking at the index in the device address table specified by the argument in the command queue. ENTDAA also uses these addresses to assign to targets on the bus.
When the controller is done executing a command, it puts a response in the response queue indicating how command execution went.
In order for the user to send and receive data to/from the controller, the user reads/writes to a bidirectional TX/RX port.
--- hw/i3c/dw-i3c.c | 882 +++++++++++++++++++++++++++++++++++- hw/i3c/trace-events | 10 + include/hw/i3c/aspeed_i3c.h | 1 + include/hw/i3c/dw-i3c.h | 143 +++++- 4 files changed, 1030 insertions(+), 6 deletions(-)
hw/i3c/dw-i3c.c +878 -4
@@ -353,12 +353,179 @@ static const uint32_t dw_i3c_ro[DW_I3C_NR_REGS] = { [R_SLAVE_CONFIG] = 0xffffffff, }; +static inline bool dw_i3c_has_hdr_ts (DWI3C *s) +{ +return ARRAY_FIELD_EX32 (s->regs,HW_CAPABILITY ,HDR_TS ); +} + +static inline bool dw_i3c_has_hdr_ddr (DWI3C *s) +{ +return ARRAY_FIELD_EX32 (s->regs,HW_CAPABILITY ,HDR_DDR ); +} + +static inline bool dw_i3c_can_transmit (DWI3C *s) +{ +/* +* We can only transmit if we're enabled and the resume bit is cleared. +* The resume bit is set on a transaction error, and software must clear it. +*/ +return ARRAY_FIELD_EX32 (s->regs,DEVICE_CTRL ,I3C_EN ) && + !ARRAY_FIELD_EX32 (s->regs,DEVICE_CTRL ,I3C_RESUME ); +} + +static inline uint8_t dw_i3c_fifo_threshold_from_reg (uint8_t regval) +{ +return regval = regval ? (2 << regval) :1 ; +} +static void dw_i3c_update_irq (DWI3C *s) {bool level = !!(s->regs[R_INTR_SIGNAL_EN ] & s->regs[R_INTR_STATUS ]);qemu_set_irq (s->irq, level); } +static void dw_i3c_end_transfer (DWI3C *s,bool is_i2c) +{ +if (is_i2c) { +legacy_i2c_end_transfer (s->bus); + }else { +i3c_end_transfer (s->bus); + } +} + +static int dw_i3c_send_start (DWI3C *s,uint8_t addr,bool is_recv,bool is_i2c) +{ +int ret; + +if (is_i2c) { + ret =legacy_i2c_start_transfer (s->bus, addr, is_recv); + }else { + ret =i3c_start_transfer (s->bus, addr, is_recv); + } +if (ret) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: NACKed on TX with addr 0x%.2x\n" , + path, addr); +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_ST_STATUS , +DW_I3C_TRANSFER_STATE_HALT ); +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_STATUS , +DW_I3C_TRANSFER_STATUS_HALT ); +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,TRANSFER_ERR ,1 ); +ARRAY_FIELD_DP32 (s->regs,DEVICE_CTRL ,I3C_RESUME ,1 ); + } + +return ret; +} + +static int dw_i3c_send (DWI3C *s,const uint8_t *data,uint32_t num_to_send, +uint32_t *num_sent,bool is_i2c) +{ +int ret; +uint32_t i; + + *num_sent =0 ; +if (is_i2c) { +/* Legacy I2C must be byte-by-byte. */ +for (i =0 ; i < num_to_send; i++) { + ret =legacy_i2c_send (s->bus, data[i]); +if (ret) { +break ; + } + (*num_sent)++; + } + }else { + ret =i3c_send (s->bus, data, num_to_send, num_sent); + } +if (ret) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: NACKed sending byte 0x%.2x\n" , + path, data[*num_sent]); +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_ST_STATUS , +DW_I3C_TRANSFER_STATE_HALT ); +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_STATUS , +DW_I3C_TRANSFER_STATUS_HALT ); +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,TRANSFER_ERR ,1 ); +ARRAY_FIELD_DP32 (s->regs,DEVICE_CTRL ,I3C_RESUME ,1 ); + } + +trace_dw_i3c_send (s->cfg.id, *num_sent); + +return ret; +} + +static int dw_i3c_send_byte (DWI3C *s,uint8_t byte,bool is_i2c) +{ +/* +* Ignored, the caller will know if we sent 0 or 1 bytes depending on if +* we were ACKed/NACKed. +*/ +uint32_t num_sent; +return dw_i3c_send (s, &byte,1 , &num_sent, is_i2c); +} + +static int dw_i3c_recv_data (DWI3C *s,bool is_i2c,uint8_t *data, +uint16_t num_to_read,uint32_t *num_read) +{ +int ret; + +if (is_i2c) { +for (uint16_t i =0 ; i < num_to_read; i++) { + data[i] =legacy_i2c_recv (s->bus); + } +/* I2C devices can neither NACK a read, nor end transfers early. */ + *num_read = num_to_read; +trace_dw_i3c_recv_data (s->cfg.id, *num_read); +return 0 ; + } +/* I3C devices can NACK if the controller sends an unsupported CCC. */ + ret =i3c_recv (s->bus, data, num_to_read, num_read); +if (ret) { +qemu_log_mask (LOG_GUEST_ERROR ,"%s: NACKed receiving byte\n" , +object_get_canonical_path (OBJECT (s))); +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_ST_STATUS , +DW_I3C_TRANSFER_STATE_HALT ); +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_STATUS , +DW_I3C_TRANSFER_STATUS_HALT ); +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,TRANSFER_ERR ,1 ); +ARRAY_FIELD_DP32 (s->regs,DEVICE_CTRL ,I3C_RESUME ,1 ); + } + +trace_dw_i3c_recv_data (s->cfg.id, *num_read); + +return ret; +} + +static inline bool dw_i3c_target_is_i2c (DWI3C *s,uint16_t offset) +{ +/* / sizeof(uint32_t) because we're indexing into our 32-bit reg array. */ +uint16_t dev_index = (ARRAY_FIELD_EX32 (s->regs,DEVICE_ADDR_TABLE_POINTER , +ADDR ) /sizeof (uint32_t )) + offset; +return FIELD_EX32 (s->regs[dev_index],DEVICE_ADDR_TABLE_LOC1 , +LEGACY_I2C_DEVICE ); +} + +static uint8_t dw_i3c_target_addr (DWI3C *s,uint16_t offset) +{ +if (offset > s->cfg.num_addressable_devices) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: Device addr table offset %d out of " +"bounds\n" , path, offset); +/* If we're out of bounds, return an address of 0. */ +return 0 ; + } + +/* / sizeof(uint32_t) because we're indexing into our 32-bit reg array. */ +uint16_t dev_index = (ARRAY_FIELD_EX32 (s->regs,DEVICE_ADDR_TABLE_POINTER , +ADDR ) /sizeof (uint32_t )) + offset; +/* I2C devices use a static address. */ +if (dw_i3c_target_is_i2c (s, offset)) { +return FIELD_EX32 (s->regs[dev_index],DEVICE_ADDR_TABLE_LOC1 , +DEV_STATIC_ADDR ); + } +return FIELD_EX32 (s->regs[dev_index],DEVICE_ADDR_TABLE_LOC1 , +DEV_DYNAMIC_ADDR ); +} +static uint32_t dw_i3c_intr_status_r (DWI3C *s) {/* Only return the status whose corresponding EN bits are set. */
@@ -393,6 +560,56 @@ static void dw_i3c_intr_force_w(DWI3C *s, uint32_t val)dw_i3c_update_irq (s); } +static uint32_t dw_i3c_pop_rx (DWI3C *s) +{ +if (fifo32_is_empty (&s->rx_queue)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: Tried to read RX FIFO when empty\n" , + path); +return 0 ; + } + +uint32_t val =fifo32_pop (&s->rx_queue); +ARRAY_FIELD_DP32 (s->regs,DATA_BUFFER_STATUS_LEVEL ,RX_BUF_BLR , +fifo32_num_used (&s->rx_queue)); + +/* Threshold is 2^RX_BUF_THLD. */ +uint8_t threshold =ARRAY_FIELD_EX32 (s->regs,DATA_BUFFER_THLD_CTRL , +RX_BUF_THLD ); + threshold =dw_i3c_fifo_threshold_from_reg (threshold); +if (fifo32_num_used (&s->rx_queue) < threshold) { +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,RX_THLD ,0 ); +dw_i3c_update_irq (s); + } + +trace_dw_i3c_pop_rx (s->cfg.id, val); +return val; +} + +static uint32_t dw_i3c_resp_queue_port_r (DWI3C *s) +{ +if (fifo32_is_empty (&s->resp_queue)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: Tried to read response FIFO when " +"empty\n" , path); +return 0 ; + } + +uint32_t val =fifo32_pop (&s->resp_queue); +ARRAY_FIELD_DP32 (s->regs,QUEUE_STATUS_LEVEL ,RESP_BUF_BLR , +fifo32_num_used (&s->resp_queue)); + +/* Threshold is the register value + 1. */ +uint8_t threshold =ARRAY_FIELD_EX32 (s->regs,QUEUE_THLD_CTRL , +RESP_BUF_THLD ) +1 ; +if (fifo32_num_used (&s->resp_queue) < threshold) { +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,RESP_RDY ,0 ); +dw_i3c_update_irq (s); + } + +return val; +} +static uint64_t dw_i3c_read (void *opaque,hwaddr offset,unsigned size) {DWI3C *s =DW_I3C (opaque);
@@ -409,16 +626,635 @@ static uint64_t dw_i3c_read(void *opaque, hwaddr offset, unsigned size)case R_INTR_STATUS : value =dw_i3c_intr_status_r (s);break ; +case R_RX_TX_DATA_PORT : + value =dw_i3c_pop_rx (s); +break ; +case R_RESPONSE_QUEUE_PORT : + value =dw_i3c_resp_queue_port_r (s); +break ;default : value = s->regs[addr];break ; } -trace_dw_i3c_read (s->id, offset, value); +trace_dw_i3c_read (s->cfg.id, offset, value);return value; } +static void dw_i3c_resp_queue_push (DWI3C *s,uint8_t err,uint8_t tid, +uint8_t ccc_type,uint16_t data_len) +{ +uint32_t val =0 ; + val =FIELD_DP32 (val,RESPONSE_QUEUE_PORT ,ERR_STATUS , err); + val =FIELD_DP32 (val,RESPONSE_QUEUE_PORT ,TID , tid); + val =FIELD_DP32 (val,RESPONSE_QUEUE_PORT ,CCCT , ccc_type); + val =FIELD_DP32 (val,RESPONSE_QUEUE_PORT ,DL , data_len); +if (!fifo32_is_full (&s->resp_queue)) { +trace_dw_i3c_resp_queue_push (s->cfg.id, val); +fifo32_push (&s->resp_queue, val); + } + +ARRAY_FIELD_DP32 (s->regs,QUEUE_STATUS_LEVEL ,RESP_BUF_BLR , +fifo32_num_used (&s->resp_queue)); +/* Threshold is the register value + 1. */ +uint8_t threshold =ARRAY_FIELD_EX32 (s->regs,QUEUE_THLD_CTRL , +RESP_BUF_THLD ) +1 ; +if (fifo32_num_used (&s->resp_queue) >= threshold) { +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,RESP_RDY ,1 ); +dw_i3c_update_irq (s); + } +} + +static void dw_i3c_push_tx (DWI3C *s,uint32_t val) +{ +if (fifo32_is_full (&s->tx_queue)) { +qemu_log_mask (LOG_GUEST_ERROR ,"%s: Tried to push to TX FIFO when " +"full\n" ,object_get_canonical_path (OBJECT (s))); +return ; + } + +trace_dw_i3c_push_tx (s->cfg.id, val); +fifo32_push (&s->tx_queue, val); +ARRAY_FIELD_DP32 (s->regs,DATA_BUFFER_STATUS_LEVEL ,TX_BUF_EMPTY_LOC , +fifo32_num_free (&s->tx_queue)); + +/* Threshold is 2^TX_BUF_THLD. */ +uint8_t empty_threshold =ARRAY_FIELD_EX32 (s->regs,DATA_BUFFER_THLD_CTRL , +TX_BUF_THLD ); + empty_threshold = +dw_i3c_fifo_threshold_from_reg (empty_threshold); +if (fifo32_num_free (&s->tx_queue) < empty_threshold) { +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,TX_THLD ,0 ); +dw_i3c_update_irq (s); + } +} + +static uint32_t dw_i3c_pop_tx (DWI3C *s) +{ +if (fifo32_is_empty (&s->tx_queue)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: Tried to pop from TX FIFO when " +"empty\n" , path); +return 0 ; + } + +uint32_t val =fifo32_pop (&s->tx_queue); +trace_dw_i3c_pop_tx (s->cfg.id, val); +ARRAY_FIELD_DP32 (s->regs,DATA_BUFFER_STATUS_LEVEL ,TX_BUF_EMPTY_LOC , +fifo32_num_free (&s->tx_queue)); + +/* Threshold is 2^TX_BUF_THLD. */ +uint8_t empty_threshold =ARRAY_FIELD_EX32 (s->regs,DATA_BUFFER_THLD_CTRL , +TX_BUF_THLD ); + empty_threshold = +dw_i3c_fifo_threshold_from_reg (empty_threshold); +if (fifo32_num_free (&s->tx_queue) >= empty_threshold) { +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,TX_THLD ,1 ); +dw_i3c_update_irq (s); + } +return val; +} + +static void dw_i3c_push_rx (DWI3C *s,uint32_t val) +{ +if (fifo32_is_full (&s->rx_queue)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: Tried to push to RX FIFO when " +"full\n" , path); +return ; + } +trace_dw_i3c_push_rx (s->cfg.id, val); +fifo32_push (&s->rx_queue, val); + +ARRAY_FIELD_DP32 (s->regs,DATA_BUFFER_STATUS_LEVEL ,RX_BUF_BLR , +fifo32_num_used (&s->rx_queue)); +/* Threshold is 2^RX_BUF_THLD. */ +uint8_t threshold =ARRAY_FIELD_EX32 (s->regs,DATA_BUFFER_THLD_CTRL , +RX_BUF_THLD ); + threshold =dw_i3c_fifo_threshold_from_reg (threshold); +if (fifo32_num_used (&s->rx_queue) >= threshold) { +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,RX_THLD ,1 ); +dw_i3c_update_irq (s); + } +} + +static void dw_i3c_short_transfer (DWI3C *s,DWI3CTransferCmd cmd, +DWI3CShortArg arg) +{ +uint8_t err =DW_I3C_RESP_QUEUE_ERR_NONE ; +uint8_t addr =dw_i3c_target_addr (s, cmd.dev_index); +bool is_i2c =dw_i3c_target_is_i2c (s, cmd.dev_index); +uint8_t data[4 ];/* Max we can send on a short transfer is 4 bytes. */ +uint8_t len =0 ; +uint32_t bytes_sent;/* Ignored on short transfers. */ + +/* Can't do reads on a short transfer. */ +if (cmd.rnw) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: Cannot do a read on a short " +"transfer\n" , path); +return ; + } + +if (dw_i3c_send_start (s, addr,/*is_recv=*/ false, is_i2c)) { + err =DW_I3C_RESP_QUEUE_ERR_I2C_NACK ; + goto transfer_done; + } + +/* Are we sending a command? */ +if (cmd.cp) { + data[len] = cmd.cmd; + len++; +/* +* byte0 is the defining byte for a command, and is only sent if a +* command is present and if the command has a defining byte present. +* (byte_strb & 0x01) is always treated as set by the controller, and is +* ignored. +*/ +if (cmd.dbp) { + data[len] += arg.byte0; + len++; + } + } + +/* Send the bytes passed in the argument. */ +if (arg.byte_strb &0x02 ) { + data[len] = arg.byte1; + len++; + } +if (arg.byte_strb &0x04 ) { + data[len] = arg.byte2; + len++; + } + +if (dw_i3c_send (s, data, len, &bytes_sent, is_i2c)) { + err =DW_I3C_RESP_QUEUE_ERR_I2C_NACK ; + }else { +/* Only go to an idle state on a successful transfer. */ +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_ST_STATUS , +DW_I3C_TRANSFER_STATE_IDLE ); + } + +transfer_done: +if (cmd.toc) { +dw_i3c_end_transfer (s, is_i2c); + } +if (cmd.roc) { +/* +* ccc_type is always 0 in controller mode, data_len is 0 in short +* transfers. +*/ +dw_i3c_resp_queue_push (s, err, cmd.tid,/*ccc_type=*/ 0 , +/*data_len=*/ 0 ); + } +} + +/* Returns number of bytes transmitted. */ +static uint16_t dw_i3c_tx (DWI3C *s,uint16_t num,bool is_i2c) +{ +uint16_t bytes_sent =0 ; +union { +uint8_t b[sizeof (uint32_t )]; +uint32_t val; + } val32; + +while (bytes_sent < num) { + val32.val =dw_i3c_pop_tx (s); +for (uint8_t i =0 ; i <sizeof (val32.val); i++) { +if (dw_i3c_send_byte (s, val32.b[i], is_i2c)) { +return bytes_sent; + } + bytes_sent++; + +/* We're not sending the full 32-bits, break early. */ +if (bytes_sent >= num) { +break ; + } + } + } + +return bytes_sent; +} + +/* Returns number of bytes received. */ +static uint16_t dw_i3c_rx (DWI3C *s,uint16_t num,bool is_i2c) +{ +/* +* Allocate a temporary buffer to read data from the target. +* Zero it and word-align it as well in case we're reading unaligned data. +*/ + g_autofree uint8_t *data = g_new0(uint8_t, num + (4 - (num & 0x03))); +uint32_t *data32 = (uint32_t *)data; +/* +* 32-bits since the I3C API wants a 32-bit number, even though the +* controller can only do 16-bit transfers. +*/ +uint32_t num_read =0 ; + +/* Can NACK if the target receives an unsupported CCC. */ +if (dw_i3c_recv_data (s, is_i2c, data, num, &num_read)) { +return 0 ; + } + +for (uint16_t i =0 ; i < num_read /4 ; i++) { +dw_i3c_push_rx (s, *data32); + data32++; + } +/* +* If we're pushing data that isn't 32-bit aligned, push what's left. +* It's software's responsibility to know what bits are valid in the partial +* data. +*/ +if (num_read &0x03 ) { +dw_i3c_push_rx (s, *data32); + } + +return num_read; +} + +static int dw_i3c_transfer_ccc (DWI3C *s,DWI3CTransferCmd cmd, +DWI3CTransferArg arg) +{ +/* CCC start is always a write. CCCs cannot be done on I2C devices. */ +if (dw_i3c_send_start (s,I3C_BROADCAST ,/*is_recv=*/ false, +/*is_i2c=*/ false)) { +return DW_I3C_RESP_QUEUE_ERR_BROADCAST_NACK ; + } +trace_dw_i3c_transfer_ccc (s->cfg.id, cmd.cmd); +if (dw_i3c_send_byte (s, cmd.cmd,/*is_i2c=*/ false)) { +return DW_I3C_RESP_QUEUE_ERR_I2C_NACK ; + } + +/* On a direct CCC, we do a restart and then send the target's address. */ +if (CCC_IS_DIRECT (cmd.cmd)) { +bool is_recv = cmd.rnw; +uint8_t addr =dw_i3c_target_addr (s, cmd.dev_index); +if (dw_i3c_send_start (s, addr, is_recv,/*is_i2c=*/ false)) { +return DW_I3C_RESP_QUEUE_ERR_BROADCAST_NACK ; + } + } + +return DW_I3C_RESP_QUEUE_ERR_NONE ; +} + +static void dw_i3c_transfer (DWI3C *s,DWI3CTransferCmd cmd, +DWI3CTransferArg arg) +{ +bool is_recv = cmd.rnw; +uint8_t err =DW_I3C_RESP_QUEUE_ERR_NONE ; +uint8_t addr =dw_i3c_target_addr (s, cmd.dev_index); +bool is_i2c =dw_i3c_target_is_i2c (s, cmd.dev_index); +uint16_t bytes_transferred =0 ; + +if (cmd.cp) { +/* We're sending a CCC. */ + err =dw_i3c_transfer_ccc (s, cmd, arg); +if (err !=DW_I3C_RESP_QUEUE_ERR_NONE ) { + goto transfer_done; + } + }else { +if (ARRAY_FIELD_EX32 (s->regs,DEVICE_CTRL ,I3C_BROADCAST_ADDR_INC ) && + is_i2c == false) { +if (dw_i3c_send_start (s,I3C_BROADCAST , +/*is_recv=*/ false, is_i2c)) { + err =DW_I3C_RESP_QUEUE_ERR_I2C_NACK ; + goto transfer_done; + } + } +/* Otherwise we're doing a private transfer. */ +if (dw_i3c_send_start (s, addr, is_recv, is_i2c)) { + err =DW_I3C_RESP_QUEUE_ERR_I2C_NACK ; + goto transfer_done; + } + } + +if (is_recv) { + bytes_transferred =dw_i3c_rx (s, arg.data_len, is_i2c); + }else { + bytes_transferred =dw_i3c_tx (s, arg.data_len, is_i2c); + } + +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_ST_STATUS , +DW_I3C_TRANSFER_STATE_IDLE ); + +transfer_done: +if (cmd.toc) { +dw_i3c_end_transfer (s, is_i2c); + } +if (cmd.roc) { +/* +* data_len is the number of bytes that still need to be TX'd, or the +* number of bytes RX'd. +*/ +uint16_t data_len = is_recv ? bytes_transferred : arg.data_len - + bytes_transferred; +/* CCCT is always 0 in controller mode. */ +dw_i3c_resp_queue_push (s, err, cmd.tid,/*ccc_type=*/ 0 , + data_len); + } + +dw_i3c_update_irq (s); +} + +static void dw_i3c_transfer_cmd (DWI3C *s,DWI3CTransferCmd cmd, +DWI3CCmdQueueData arg) +{ +uint8_t arg_attr =FIELD_EX32 (arg.word,COMMAND_QUEUE_PORT ,CMD_ATTR ); + +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CMD_TID , cmd.tid); + +/* User is trying to do HDR transfers, see if we can do them. */ +if (cmd.speed ==0x06 && !dw_i3c_has_hdr_ddr (s)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: HDR DDR is not supported\n" , path); +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_ST_STATUS , +DW_I3C_TRANSFER_STATE_HALT ); +return ; + } +if (cmd.speed ==0x05 && !dw_i3c_has_hdr_ts (s)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: HDR TS is not supported\n" , path); +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_ST_STATUS , +DW_I3C_TRANSFER_STATE_HALT ); +return ; + } + +if (arg_attr ==DW_I3C_CMD_ATTR_TRANSFER_ARG ) { +dw_i3c_transfer (s, cmd, arg.transfer_arg); + }else if (arg_attr ==DW_I3C_CMD_ATTR_SHORT_DATA_ARG ) { +dw_i3c_short_transfer (s, cmd, arg.short_arg); + }else { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: Unknown command queue cmd_attr 0x%x" +"\n" , path, arg_attr); +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_ST_STATUS , +DW_I3C_TRANSFER_STATE_HALT ); + } +} + +static void dw_i3c_update_char_table (DWI3C *s,uint8_t offset,uint64_t pid, +uint8_t bcr,uint8_t dcr,uint8_t addr) +{ +if (offset > s->cfg.num_addressable_devices) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: Device char table offset %d out of " +"bounds\n" , path, offset); +/* If we're out of bounds, do nothing. */ +return ; + } + +/* +* Each device offset is 128 bits apart in the table, since each device gets +* 4 * 32-bits of entries in the table. +* / sizeof(uint32_t) because we're indexing into our 32-bit reg array. +*/ +uint16_t dev_index = (ARRAY_FIELD_EX32 (s->regs,DEV_CHAR_TABLE_POINTER , +P_DEV_CHAR_TABLE_START_ADDR ) / +sizeof (uint32_t )) + + (offset *sizeof (uint32_t )); + s->regs[dev_index] = pid &0xffffffff ; + pid >>=32 ; + s->regs[dev_index +1 ] =FIELD_DP32 (s->regs[dev_index +1 ], +DEVICE_CHARACTERISTIC_TABLE_LOC2 , +MSB_PID , pid); + s->regs[dev_index +2 ] =FIELD_DP32 (s->regs[dev_index +2 ], +DEVICE_CHARACTERISTIC_TABLE_LOC3 ,DCR , + dcr); + s->regs[dev_index +2 ] =FIELD_DP32 (s->regs[dev_index +2 ], +DEVICE_CHARACTERISTIC_TABLE_LOC3 ,BCR , + bcr); + s->regs[dev_index +3 ] =FIELD_DP32 (s->regs[dev_index +3 ], +DEVICE_CHARACTERISTIC_TABLE_LOC4 , +DEV_DYNAMIC_ADDR , addr); + +/* Increment PRESENT_DEV_CHAR_TABLE_INDEX. */ +uint8_t idx =ARRAY_FIELD_EX32 (s->regs,DEV_CHAR_TABLE_POINTER , +PRESENT_DEV_CHAR_TABLE_INDEX ); +/* Increment and rollover. */ + idx++; +if (idx >=ARRAY_FIELD_EX32 (s->regs,DEV_CHAR_TABLE_POINTER , +DEV_CHAR_TABLE_DEPTH ) /4 ) { + idx =0 ; + } +ARRAY_FIELD_DP32 (s->regs,DEV_CHAR_TABLE_POINTER , +PRESENT_DEV_CHAR_TABLE_INDEX , idx); +} + +static void dw_i3c_addr_assign_cmd (DWI3C *s,DWI3CAddrAssignCmd cmd) +{ +uint8_t i =0 ; +uint8_t err =DW_I3C_RESP_QUEUE_ERR_NONE ; + +/* Tell everyone to ENTDAA. If these error, no one is on the bus. */ +if (dw_i3c_send_start (s,I3C_BROADCAST ,/*is_recv=*/ false, +/*is_i2c=*/ false)) { + err =DW_I3C_RESP_QUEUE_ERR_BROADCAST_NACK ; + goto transfer_done; + } +if (dw_i3c_send_byte (s, cmd.cmd,/*is_i2c=*/ false)) { + err =DW_I3C_RESP_QUEUE_ERR_BROADCAST_NACK ; + goto transfer_done; + } + +/* Go through each device in the table and assign it an address. */ +for (i =0 ; i < cmd.dev_count; i++) { +uint8_t addr =dw_i3c_target_addr (s, cmd.dev_index + i); +union { +uint64_t pid:48 ; +uint8_t bcr; +uint8_t dcr; +uint32_t w[2 ]; +uint8_t b[8 ]; + } target_info; + +/* If this fails, there was no one left to ENTDAA. */ +if (dw_i3c_send_start (s,I3C_BROADCAST ,/*is_recv=*/ false, +/*is_i2c=*/ false)) { + err =DW_I3C_RESP_QUEUE_ERR_BROADCAST_NACK ; +break ; + } + +/* +* In ENTDAA, we read 8 bytes from the target, which will be the +* target's PID, BCR, and DCR. After that, we send it the dynamic +* address. +* Don't bother checking the number of bytes received, it must send 8 +* bytes during ENTDAA. +*/ +uint32_t num_read; +if (dw_i3c_recv_data (s,/*is_i2c=*/ false, target_info.b, +I3C_ENTDAA_SIZE , &num_read)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: Target NACKed ENTDAA CCC\n" , + path); + err =DW_I3C_RESP_QUEUE_ERR_DAA_NACK ; + goto transfer_done; + } +if (dw_i3c_send_byte (s, addr,/*is_i2c=*/ false)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: Target NACKed addr 0x%.2x " +"during ENTDAA\n" , path, addr); + err =DW_I3C_RESP_QUEUE_ERR_DAA_NACK ; +break ; + } +dw_i3c_update_char_table (s, cmd.dev_index + i, + target_info.pid, target_info.bcr, + target_info.dcr, addr); + +/* Push the PID, BCR, and DCR to the RX queue. */ +dw_i3c_push_rx (s, target_info.w[0 ]); +dw_i3c_push_rx (s, target_info.w[1 ]); + } + +transfer_done: +/* Do we send a STOP? */ +if (cmd.toc) { +dw_i3c_end_transfer (s,/*is_i2c=*/ false); + } +/* +* For addr assign commands, the length field is the number of devices +* left to assign. CCCT is always 0 in controller mode. +*/ +if (cmd.roc) { +dw_i3c_resp_queue_push (s, err, cmd.tid,/*ccc_type=*/ 0 , + cmd.dev_count - i); + } +} + +static uint32_t dw_i3c_cmd_queue_pop (DWI3C *s) +{ +if (fifo32_is_empty (&s->cmd_queue)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: Tried to dequeue command queue " +"when it was empty\n" , path); +return 0 ; + } +uint32_t val =fifo32_pop (&s->cmd_queue); + +uint8_t empty_threshold =ARRAY_FIELD_EX32 (s->regs,QUEUE_THLD_CTRL , +CMD_BUF_EMPTY_THLD ); +uint8_t cmd_queue_empty_loc =ARRAY_FIELD_EX32 (s->regs, +QUEUE_STATUS_LEVEL , +CMD_QUEUE_EMPTY_LOC ); + cmd_queue_empty_loc++; +ARRAY_FIELD_DP32 (s->regs,QUEUE_STATUS_LEVEL ,CMD_QUEUE_EMPTY_LOC , + cmd_queue_empty_loc); +if (cmd_queue_empty_loc >= empty_threshold) { +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,CMD_QUEUE_RDY ,1 ); +dw_i3c_update_irq (s); + } + +return val; +} + +static void dw_i3c_cmd_queue_execute (DWI3C *s) +{ +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_ST_STATUS , +DW_I3C_TRANSFER_STATE_IDLE ); +if (!dw_i3c_can_transmit (s)) { +return ; + } + +/* +* We only start executing when a command is passed into the FIFO. +* We expect there to be a multiple of 2 items in the queue. The first item +* should be an argument to a command, and the command should be the second +* item. +*/ +if (fifo32_num_used (&s->cmd_queue) &1 ) { +return ; + } + +while (!fifo32_is_empty (&s->cmd_queue)) { +DWI3CCmdQueueData arg; + arg.word =dw_i3c_cmd_queue_pop (s); +DWI3CCmdQueueData cmd; + cmd.word =dw_i3c_cmd_queue_pop (s); +trace_dw_i3c_cmd_queue_execute (s->cfg.id, cmd.word, arg.word); + +uint8_t cmd_attr =FIELD_EX32 (cmd.word,COMMAND_QUEUE_PORT ,CMD_ATTR ); +switch (cmd_attr) { +case DW_I3C_CMD_ATTR_TRANSFER_CMD : +dw_i3c_transfer_cmd (s, cmd.transfer_cmd, arg); +break ; +case DW_I3C_CMD_ATTR_ADDR_ASSIGN_CMD : +/* Arg is discarded for addr assign commands. */ +dw_i3c_addr_assign_cmd (s, cmd.addr_assign_cmd); +break ; +case DW_I3C_CMD_ATTR_TRANSFER_ARG : +case DW_I3C_CMD_ATTR_SHORT_DATA_ARG : + { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: Command queue received " +"argument packet when it expected a command " +"packet\n" , path); + } +break ; +default : +/* +* The caller's check before queueing an item should prevent this +* from happening. +*/ +g_assert_not_reached (); +break ; + } + } +} + +static void dw_i3c_cmd_queue_push (DWI3C *s,uint32_t val) +{ +if (fifo32_is_full (&s->cmd_queue)) { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: Command queue received packet when " +"already full\n" , path); +return ; + } +trace_dw_i3c_cmd_queue_push (s->cfg.id, val); +fifo32_push (&s->cmd_queue, val); + +uint8_t empty_threshold =ARRAY_FIELD_EX32 (s->regs,QUEUE_THLD_CTRL , +CMD_BUF_EMPTY_THLD ); +uint8_t cmd_queue_empty_loc =ARRAY_FIELD_EX32 (s->regs, +QUEUE_STATUS_LEVEL , +CMD_QUEUE_EMPTY_LOC ); +if (cmd_queue_empty_loc) { + cmd_queue_empty_loc--; +ARRAY_FIELD_DP32 (s->regs,QUEUE_STATUS_LEVEL ,CMD_QUEUE_EMPTY_LOC , + cmd_queue_empty_loc); + } +if (cmd_queue_empty_loc < empty_threshold) { +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,CMD_QUEUE_RDY ,0 ); +dw_i3c_update_irq (s); + } +} + +static void dw_i3c_cmd_queue_port_w (DWI3C *s,uint32_t val) +{ +uint8_t cmd_attr =FIELD_EX32 (val,COMMAND_QUEUE_PORT ,CMD_ATTR ); + +switch (cmd_attr) { +/* If a command is received we can start executing it. */ +case DW_I3C_CMD_ATTR_TRANSFER_CMD : +case DW_I3C_CMD_ATTR_ADDR_ASSIGN_CMD : +dw_i3c_cmd_queue_push (s, val); +dw_i3c_cmd_queue_execute (s); +break ; +/* If we get an argument just push it. */ +case DW_I3C_CMD_ATTR_TRANSFER_ARG : +case DW_I3C_CMD_ATTR_SHORT_DATA_ARG : +dw_i3c_cmd_queue_push (s, val); +break ; +default : + { + g_autofree char *path = object_get_canonical_path(OBJECT(s)); +qemu_log_mask (LOG_GUEST_ERROR ,"%s: Command queue received packet " +"with unknown cmd attr 0x%x\n" , path, cmd_attr); + } +break ; + } +} +static void dw_i3c_write (void *opaque,hwaddr offset,uint64_t value,unsigned size) {
@@ -426,7 +1262,7 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,uint32_t addr = offset >>2 ;uint32_t val32 = (uint32_t )value; -trace_dw_i3c_write (s->id, offset, value); +trace_dw_i3c_write (s->cfg.id, offset, value); val32 &= ~dw_i3c_ro[addr];switch (addr) {
@@ -450,6 +1286,10 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value, __func__, offset, value);break ;case R_RX_TX_DATA_PORT : +dw_i3c_push_tx (s, val32); +break ; +case R_COMMAND_QUEUE_PORT : +dw_i3c_cmd_queue_port_w (s, val32);break ;case R_RESET_CTRL :break ;
@@ -492,22 +1332,56 @@ static void dw_i3c_reset_enter(Object *obj, ResetType type)DWI3C *s =DW_I3C (obj);memcpy (s->regs, dw_i3c_resets,sizeof (s->regs)); +/* +* The user config for these may differ from our resets array, set them +* manually. +*/ +ARRAY_FIELD_DP32 (s->regs,DEVICE_ADDR_TABLE_POINTER ,ADDR , + s->cfg.dev_addr_table_pointer); +ARRAY_FIELD_DP32 (s->regs,DEVICE_ADDR_TABLE_POINTER ,DEPTH , + s->cfg.dev_addr_table_depth); +ARRAY_FIELD_DP32 (s->regs,DEV_CHAR_TABLE_POINTER , +P_DEV_CHAR_TABLE_START_ADDR , + s->cfg.dev_char_table_pointer); +ARRAY_FIELD_DP32 (s->regs,DEV_CHAR_TABLE_POINTER ,DEV_CHAR_TABLE_DEPTH , + s->cfg.dev_char_table_depth); }static void dw_i3c_realize (DeviceState *dev,Error **errp) {DWI3C *s =DW_I3C (dev); - g_autofree char *name = g_strdup_printf(TYPE_DW_I3C ".%d", s->id); + g_autofree char *name = g_strdup_printf(TYPE_DW_I3C ".%d", s->cfg.id);sysbus_init_irq (SYS_BUS_DEVICE (dev), &s->irq);memory_region_init_io (&s->mr,OBJECT (s), &dw_i3c_ops, s, name,DW_I3C_NR_REGS <<2 );sysbus_init_mmio (SYS_BUS_DEVICE (dev), &s->mr); + +fifo32_create (&s->cmd_queue, s->cfg.cmd_resp_queue_capacity_bytes); +fifo32_create (&s->resp_queue, s->cfg.cmd_resp_queue_capacity_bytes); +fifo32_create (&s->tx_queue, s->cfg.tx_rx_queue_capacity_bytes); +fifo32_create (&s->rx_queue, s->cfg.tx_rx_queue_capacity_bytes); + + s->bus =i3c_init_bus (DEVICE (s), name); }static const Property dw_i3c_properties[] = { -DEFINE_PROP_UINT8 ("device-id" ,DWI3C , id,0 ), +DEFINE_PROP_UINT8 ("device-id" ,DWI3C , cfg.id,0 ), +DEFINE_PROP_UINT8 ("command-response-queue-capacity-bytes" ,DWI3C , + cfg.cmd_resp_queue_capacity_bytes,0x10 ), +DEFINE_PROP_UINT16 ("tx-rx-queue-capacity-bytes" ,DWI3C , + cfg.tx_rx_queue_capacity_bytes,0x40 ), +DEFINE_PROP_UINT8 ("num-addressable-devices" ,DWI3C , + cfg.num_addressable_devices,8 ), +DEFINE_PROP_UINT16 ("dev-addr-table-pointer" ,DWI3C , + cfg.dev_addr_table_pointer,0x280 ), +DEFINE_PROP_UINT16 ("dev-addr-table-depth" ,DWI3C , + cfg.dev_addr_table_depth,0x08 ), +DEFINE_PROP_UINT16 ("dev-char-table-pointer" ,DWI3C , + cfg.dev_char_table_pointer,0x200 ), +DEFINE_PROP_UINT16 ("dev-char-table-depth" ,DWI3C , + cfg.dev_char_table_depth,0x20 ), };static void dw_i3c_class_init (ObjectClass *klass,const void *data)
hw/i3c/trace-events +10 -0
@@ -7,6 +7,16 @@ aspeed_i3c_write(uint64_t offset, uint64_t data) "I3C write: offset 0x%" PRIx64 # dw-i3c,c dw_i3c_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read: offset 0x%" PRIx64 " data 0x%" PRIx64 dw_i3c_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64 +dw_i3c_send(uint32_t deviceid, uint32_t num_bytes) "I3C Dev[%u] send %" PRId32 " bytes to bus" +dw_i3c_recv_data(uint32_t deviceid, uint32_t num_bytes) "I3C Dev[%u] recv %" PRId32 " bytes from bus" +dw_i3c_pop_rx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] pop 0x%" PRIx32 " from RX FIFO" +dw_i3c_resp_queue_push(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to response queue" +dw_i3c_push_tx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to TX FIFO" +dw_i3c_pop_tx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] pop 0x%" PRIx32 " from TX FIFO" +dw_i3c_push_rx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to RX FIFO" +dw_i3c_transfer_ccc(uint32_t deviceid, uint8_t ccc) "I3C Dev[%u] transfer CCC 0x%" PRIx8 +dw_i3c_cmd_queue_execute(uint32_t deviceid, uint32_t cmd, uint32_t arg) "I3C Dev[%u] execute command 0x%" PRIx32 " arg 0x%" PRIx32 +dw_i3c_cmd_queue_push(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to cmd queue" # core.c i3c_target_event(uint8_t address, uint8_t event) "I3C target 0x%" PRIx8 " event 0x%" PRIx8
include/hw/i3c/aspeed_i3c.h +1 -0
@@ -2,6 +2,7 @@* ASPEED I3C Controller * * Copyright (C) 2021 ASPEED Technology Inc. +* Copyright (C) 2023 Google, LLC * * This code is licensed under the GPL version 2 or later. See * the COPYING file in the top-level directory.
include/hw/i3c/dw-i3c.h +141 -2
161 lines not on this page · raw message
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
PATCH 13/19 hw/i3c/dw-i3c: Add IBI handling
In reply to Joe KomlodiAdds handling for different IBI events that the controller can receive. This includes:
- Handling a hot-join from a target
- Handling a secondary controller on the bus requesting to be the primary bus controller
- Handling an interrupt request from a target.
When receiving an IBI, the controller sets an interrupt to notify software about what happened.
When the IBI is finished being serviced, the controller pushes the result of the IBI and any data received from the target into the IBI queue.
--- hw/i3c/dw-i3c.c | 317 ++++++++++++++++++++++++++++++++++++++++ hw/i3c/trace-events | 2 + include/hw/i3c/dw-i3c.h | 27 ++++ 3 files changed, 346 insertions(+)
hw/i3c/dw-i3c.c +317 -0
@@ -19,6 +19,14 @@#include "trace.h" #include "hw/irq.h" +/* +* Disable event command values. sent along with a DISEC CCC to disable certain +* events on targets. +*/ +#define DISEC_HJ 0x08 +#define DISEC_CR 0x02 +#define DISEC_INT 0x01 + REG32(DEVICE_CTRL, 0x00) FIELD(DEVICE_CTRL, I3C_BROADCAST_ADDR_INC, 0, 1)FIELD (DEVICE_CTRL ,I2C_SLAVE_PRESENT ,7 ,1 )
@@ -373,6 +381,23 @@ static inline bool dw_i3c_can_transmit(DWI3C *s) !ARRAY_FIELD_EX32 (s->regs,DEVICE_CTRL ,I3C_RESUME ); } +static inline uint8_t dw_i3c_ibi_slice_size (DWI3C *s) +{ +uint8_t ibi_slice_size =ARRAY_FIELD_EX32 (s->regs,QUEUE_THLD_CTRL , +IBI_DATA_THLD ); +/* The minimum supported slice size is 4 bytes. */ +if (ibi_slice_size ==0 ) { + ibi_slice_size =1 ; + } + ibi_slice_size *=sizeof (uint32_t ); +/* maximum supported size is 63 bytes. */ +if (ibi_slice_size >=64 ) { + ibi_slice_size =63 ; + } + +return ibi_slice_size; +} +static inline uint8_t dw_i3c_fifo_threshold_from_reg (uint8_t regval) {return regval = regval ? (2 << regval) :1 ;
@@ -526,6 +551,266 @@ static uint8_t dw_i3c_target_addr(DWI3C *s, uint16_t offset) DEV_DYNAMIC_ADDR); } +static int dw_i3c_addr_table_index_from_addr (DWI3C *s,uint8_t addr) +{ +uint8_t table_size =ARRAY_FIELD_EX32 (s->regs,DEVICE_ADDR_TABLE_POINTER , +DEPTH ); +for (uint8_t i =0 ; i < table_size; i++) { +if (dw_i3c_target_addr (s, i) == addr) { +return i; + } + } +return -1 ; +} + +static void dw_i3c_send_disec (DWI3C *s) +{ +uint8_t ccc =I3C_CCC_DISEC ; +if (s->ibi_data.send_direct_disec) { + ccc =I3C_CCCD_DISEC ; + } + +dw_i3c_send_start (s,I3C_BROADCAST ,/*is_recv=*/ false, +/*is_i2c=*/ false); +dw_i3c_send_byte (s, ccc,/*is_i2c=*/ false); +if (s->ibi_data.send_direct_disec) { +dw_i3c_send_start (s, s->ibi_data.disec_addr, +/*is_recv=*/ false,/*is_i2c=*/ false); + } +dw_i3c_send_byte (s, s->ibi_data.disec_byte,/*is_i2c=*/ false); +} + +static int dw_i3c_handle_hj (DWI3C *s) +{ +if (ARRAY_FIELD_EX32 (s->regs,IBI_QUEUE_CTRL ,NOTIFY_REJECTED_HOT_JOIN )) { + s->ibi_data.notify_ibi_nack = true; + } + +bool nack_and_disable =ARRAY_FIELD_EX32 (s->regs,DEVICE_CTRL , +HOT_JOIN_ACK_NACK_CTRL ); +if (nack_and_disable) { + s->ibi_data.ibi_queue_status =FIELD_DP32 (s->ibi_data.ibi_queue_status, +IBI_QUEUE_STATUS , +IBI_STATUS ,1 ); + s->ibi_data.ibi_nacked = true; + s->ibi_data.disec_byte =DISEC_HJ ; +return -1 ; + } +return 0 ; +} + +static int dw_i3c_handle_ctlr_req (DWI3C *s,uint8_t addr) +{ +if (ARRAY_FIELD_EX32 (s->regs,IBI_QUEUE_CTRL ,NOTIFY_REJECTED_MASTER_REQ )) { + s->ibi_data.notify_ibi_nack = true; + } + +int table_offset =dw_i3c_addr_table_index_from_addr (s, addr); +/* Doesn't exist in the table, NACK it, don't DISEC. */ +if (table_offset <0 ) { +return -1 ; + } + +/* / sizeof(uint32_t) because we're indexing into our 32-bit reg array. */ + table_offset += (ARRAY_FIELD_EX32 (s->regs,DEVICE_ADDR_TABLE_POINTER , +ADDR ) /sizeof (uint32_t )); +if (FIELD_EX32 (s->regs[table_offset],DEVICE_ADDR_TABLE_LOC1 ,MR_REJECT )) { + s->ibi_data.ibi_queue_status =FIELD_DP32 (s->ibi_data.ibi_queue_status, +IBI_QUEUE_STATUS , +IBI_STATUS ,1 ); + s->ibi_data.ibi_nacked = true; + s->ibi_data.disec_addr = addr; +/* Tell the requester to disable controller role requests. */ + s->ibi_data.disec_byte =DISEC_CR ; + s->ibi_data.send_direct_disec = true; +return -1 ; + } +return 0 ; +} + +static int dw_i3c_handle_targ_irq (DWI3C *s,uint8_t addr) +{ +if (ARRAY_FIELD_EX32 (s->regs,IBI_QUEUE_CTRL ,NOTIFY_REJECTED_SLAVE_IRQ )) { + s->ibi_data.notify_ibi_nack = true; + } + +int table_offset =dw_i3c_addr_table_index_from_addr (s, addr); +/* Doesn't exist in the table, NACK it, don't DISEC. */ +if (table_offset <0 ) { +return -1 ; + } + +/* / sizeof(uint32_t) because we're indexing into our 32-bit reg array. */ + table_offset += (ARRAY_FIELD_EX32 (s->regs,DEVICE_ADDR_TABLE_POINTER , +ADDR ) /sizeof (uint32_t )); +if (FIELD_EX32 (s->regs[table_offset],DEVICE_ADDR_TABLE_LOC1 ,SIR_REJECT )) { + s->ibi_data.ibi_queue_status =FIELD_DP32 (s->ibi_data.ibi_queue_status, +IBI_QUEUE_STATUS , +IBI_STATUS ,1 ); + s->ibi_data.ibi_nacked = true; + s->ibi_data.disec_addr = addr; +/* Tell the requester to disable interrupts. */ + s->ibi_data.disec_byte =DISEC_INT ; + s->ibi_data.send_direct_disec = true; +return -1 ; + } +return 0 ; +} + +static int dw_i3c_ibi_handle (I3CBus *bus,uint8_t addr,bool is_recv) +{ +DWI3C *s =DW_I3C (bus->qbus.parent); + +trace_dw_i3c_ibi_handle (s->cfg.id, addr, is_recv); + s->ibi_data.ibi_queue_status =FIELD_DP32 (s->ibi_data.ibi_queue_status, +IBI_QUEUE_STATUS ,IBI_ID , + (addr <<1 ) | is_recv); +/* Is this a hot join request? */ +if (addr ==I3C_HJ_ADDR ) { +return dw_i3c_handle_hj (s); + } +/* Is secondary controller requesting access? */ +if (!is_recv) { +return dw_i3c_handle_ctlr_req (s, addr); + } +/* Is this a target IRQ? */ +if (is_recv) { +return dw_i3c_handle_targ_irq (s, addr); + } + +/* At this point the IBI should have been ACKed or NACKed. */ +g_assert_not_reached (); +return -1 ; +} + +static int dw_i3c_ibi_recv (I3CBus *bus,uint8_t data) +{ +DWI3C *s =DW_I3C (bus->qbus.parent); +if (fifo8_is_full (&s->ibi_data.ibi_intermediate_queue)) { +return -1 ; + } + +fifo8_push (&s->ibi_data.ibi_intermediate_queue, data); +trace_dw_i3c_ibi_recv (s->cfg.id, data); +return 0 ; +} + +static void dw_i3c_ibi_queue_push (DWI3C *s) +{ +/* Stored value is in 32-bit chunks, convert it to byte chunks. */ +uint8_t ibi_slice_size =dw_i3c_ibi_slice_size (s); +uint8_t num_slices = (fifo8_num_used (&s->ibi_data.ibi_intermediate_queue) / + ibi_slice_size) + + ((fifo8_num_used (&s->ibi_data.ibi_intermediate_queue) % + ibi_slice_size) ?1 :0 ); +uint8_t ibi_status_count = num_slices; +union { +uint8_t b[sizeof (uint32_t )]; +uint32_t val32; + } ibi_data = { + .val32 =0 + }; + +/* The report was suppressed, do nothing. */ +if (s->ibi_data.ibi_nacked && !s->ibi_data.notify_ibi_nack) { +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_ST_STATUS , +DW_I3C_TRANSFER_STATE_IDLE ); +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_STATUS , +DW_I3C_TRANSFER_STATUS_IDLE ); +return ; + } + +/* If we don't have any slices to push, just push the status. */ +if (num_slices ==0 ) { + s->ibi_data.ibi_queue_status = +FIELD_DP32 (s->ibi_data.ibi_queue_status,IBI_QUEUE_STATUS , +LAST_STATUS ,1 ); +fifo32_push (&s->ibi_queue, s->ibi_data.ibi_queue_status); + ibi_status_count =1 ; + } + +for (uint8_t i =0 ; i < num_slices; i++) { +/* If this is the last slice, set LAST_STATUS. */ +if (fifo8_num_used (&s->ibi_data.ibi_intermediate_queue) < + ibi_slice_size) { + s->ibi_data.ibi_queue_status = +FIELD_DP32 (s->ibi_data.ibi_queue_status,IBI_QUEUE_STATUS , +IBI_DATA_LEN , +fifo8_num_used (&s->ibi_data.ibi_intermediate_queue)); + s->ibi_data.ibi_queue_status = +FIELD_DP32 (s->ibi_data.ibi_queue_status,IBI_QUEUE_STATUS , +LAST_STATUS ,1 ); + }else { + s->ibi_data.ibi_queue_status = +FIELD_DP32 (s->ibi_data.ibi_queue_status,IBI_QUEUE_STATUS , +IBI_DATA_LEN , ibi_slice_size); + } + +/* Push the IBI status header. */ +fifo32_push (&s->ibi_queue, s->ibi_data.ibi_queue_status); +/* Move each IBI byte into a 32-bit word and push it into the queue. */ +for (uint8_t j =0 ; j < ibi_slice_size; ++j) { +if (fifo8_is_empty (&s->ibi_data.ibi_intermediate_queue)) { +break ; + } + + ibi_data.b[j &3 ] =fifo8_pop (&s->ibi_data.ibi_intermediate_queue); +/* We have 32-bits, push it to the IBI FIFO. */ +if ((j &0x03 ) ==0x03 ) { +fifo32_push (&s->ibi_queue, ibi_data.val32); + ibi_data.val32 =0 ; + } + } +/* If the data isn't 32-bit aligned, push the leftover bytes. */ +if (ibi_slice_size &0x03 ) { +fifo32_push (&s->ibi_queue, ibi_data.val32); + } + +/* Clear out the data length for the next iteration. */ + s->ibi_data.ibi_queue_status =FIELD_DP32 (s->ibi_data.ibi_queue_status, +IBI_QUEUE_STATUS ,IBI_DATA_LEN ,0 ); + } + +ARRAY_FIELD_DP32 (s->regs,QUEUE_STATUS_LEVEL ,IBI_BUF_BLR , +fifo32_num_used (&s->ibi_queue)); +ARRAY_FIELD_DP32 (s->regs,QUEUE_STATUS_LEVEL ,IBI_STATUS_CNT , + ibi_status_count); +/* Threshold is the register value + 1. */ +uint8_t threshold =ARRAY_FIELD_EX32 (s->regs,QUEUE_THLD_CTRL , +IBI_STATUS_THLD ) +1 ; +if (fifo32_num_used (&s->ibi_queue) >= threshold) { +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,IBI_THLD ,1 ); +dw_i3c_update_irq (s); + } + +/* State update. */ +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_ST_STATUS , +DW_I3C_TRANSFER_STATE_IDLE ); +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_STATUS , +DW_I3C_TRANSFER_STATUS_IDLE ); +} + +static int dw_i3c_ibi_finish (I3CBus *bus) +{ +DWI3C *s =DW_I3C (bus->qbus.parent); +bool nack_and_disable_hj =ARRAY_FIELD_EX32 (s->regs,DEVICE_CTRL , +HOT_JOIN_ACK_NACK_CTRL ); +if (nack_and_disable_hj || s->ibi_data.send_direct_disec) { +dw_i3c_send_disec (s); + } +dw_i3c_ibi_queue_push (s); + +/* Clear out the intermediate values. */ + s->ibi_data.ibi_queue_status =0 ; + s->ibi_data.disec_addr =0 ; + s->ibi_data.disec_byte =0 ; + s->ibi_data.send_direct_disec = false; + s->ibi_data.notify_ibi_nack = false; + s->ibi_data.ibi_nacked = false; + +return 0 ; +} +static uint32_t dw_i3c_intr_status_r (DWI3C *s) {/* Only return the status whose corresponding EN bits are set. */
@@ -586,6 +871,25 @@ static uint32_t dw_i3c_pop_rx(DWI3C *s)return val; } +static uint32_t dw_i3c_ibi_queue_r (DWI3C *s) +{ +if (fifo32_is_empty (&s->ibi_queue)) { +return 0 ; + } + +uint32_t val =fifo32_pop (&s->ibi_queue); +ARRAY_FIELD_DP32 (s->regs,QUEUE_STATUS_LEVEL ,IBI_BUF_BLR , +fifo32_num_used (&s->ibi_queue)); +/* Threshold is the register value + 1. */ +uint8_t threshold =ARRAY_FIELD_EX32 (s->regs,QUEUE_THLD_CTRL , +IBI_STATUS_THLD ) +1 ; +if (fifo32_num_used (&s->ibi_queue) < threshold) { +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,IBI_THLD ,0 ); +dw_i3c_update_irq (s); + } +return val; +} +static uint32_t dw_i3c_resp_queue_port_r (DWI3C *s) {if (fifo32_is_empty (&s->resp_queue)) {
@@ -623,6 +927,9 @@ static uint64_t dw_i3c_read(void *opaque, hwaddr offset, unsigned size)case R_INTR_FORCE : value =0 ;break ; +case R_IBI_QUEUE_DATA : + value =dw_i3c_ibi_queue_r (s); +break ;case R_INTR_STATUS : value =dw_i3c_intr_status_r (s);break ;
@@ -1362,8 +1669,16 @@ static void dw_i3c_realize(DeviceState *dev, Error **errp)fifo32_create (&s->resp_queue, s->cfg.cmd_resp_queue_capacity_bytes);fifo32_create (&s->tx_queue, s->cfg.tx_rx_queue_capacity_bytes);fifo32_create (&s->rx_queue, s->cfg.tx_rx_queue_capacity_bytes); +fifo32_create (&s->ibi_queue, s->cfg.ibi_queue_capacity_bytes); +/* Arbitrarily large enough to not be an issue. */ +fifo8_create (&s->ibi_data.ibi_intermediate_queue, + s->cfg.ibi_queue_capacity_bytes *8 ); s->bus =i3c_init_bus (DEVICE (s), name); +I3CBusClass *bc =I3C_BUS_GET_CLASS (s->bus); + bc->ibi_handle = dw_i3c_ibi_handle; + bc->ibi_recv = dw_i3c_ibi_recv; + bc->ibi_finish = dw_i3c_ibi_finish; }static const Property dw_i3c_properties[] = {
@@ -1372,6 +1687,8 @@ static const Property dw_i3c_properties[] = { cfg.cmd_resp_queue_capacity_bytes, 0x10),DEFINE_PROP_UINT16 ("tx-rx-queue-capacity-bytes" ,DWI3C , cfg.tx_rx_queue_capacity_bytes,0x40 ), +DEFINE_PROP_UINT8 ("ibi-queue-capacity-bytes" ,DWI3C , + cfg.ibi_queue_capacity_bytes,0x10 ),DEFINE_PROP_UINT8 ("num-addressable-devices" ,DWI3C , cfg.num_addressable_devices,8 ), DEFINE_PROP_UINT16("dev-addr-table-pointer", DWI3C,
hw/i3c/trace-events +2 -0
@@ -9,6 +9,8 @@ dw_i3c_read(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] read dw_i3c_write(uint32_t deviceid, uint64_t offset, uint64_t data) "I3C Dev[%u] write: offset 0x%" PRIx64 " data 0x%" PRIx64 dw_i3c_send(uint32_t deviceid, uint32_t num_bytes) "I3C Dev[%u] send %" PRId32 " bytes to bus" dw_i3c_recv_data(uint32_t deviceid, uint32_t num_bytes) "I3C Dev[%u] recv %" PRId32 " bytes from bus" +dw_i3c_ibi_recv(uint32_t deviceid, uint8_t ibi_byte) "I3C Dev[%u] recv IBI byte 0x%" PRIx8 +dw_i3c_ibi_handle(uint32_t deviceid, uint8_t addr, bool rnw) "I3C Dev[%u] handle IBI from address 0x%" PRIx8 " RnW=%d" dw_i3c_pop_rx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] pop 0x%" PRIx32 " from RX FIFO" dw_i3c_resp_queue_push(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to response queue" dw_i3c_push_tx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to TX FIFO"
include/hw/i3c/dw-i3c.h +27 -0
@@ -141,6 +141,28 @@ typedef union DWI3CCmdQueueData {DWI3CAddrAssignCmd addr_assign_cmd; } DWI3CCmdQueueData; +/* +* When we receive an IBI with data, we need to store it temporarily until +* the target is finished sending data. Then we can set the IBI queue status +* appropriately. +*/ +typedef struct DWI3CIBIData { +/* Do we notify the user that an IBI was NACKed? */ +bool notify_ibi_nack; +/* Intermediate storage of IBI_QUEUE_STATUS. */ +uint32_t ibi_queue_status; +/* Temporary buffer to store IBI data from the target. */ +Fifo8 ibi_intermediate_queue; +/* The address we should send a CCC_DISEC to. */ +uint8_t disec_addr; +/* The byte we should send along with the CCC_DISEC. */ +uint8_t disec_byte; +/* Should we send a direct DISEC CCC? (As opposed to global). */ +bool send_direct_disec; +/* Was this IBI NACKed? */ +bool ibi_nacked; +}DWI3CIBIData ; + typedef struct DWI3C { /* <private> */ SysBusDevice parent;
@@ -154,11 +176,16 @@ typedef struct DWI3C {Fifo32 resp_queue;Fifo32 tx_queue;Fifo32 rx_queue; +Fifo32 ibi_queue; + +/* Temporary storage for IBI data. */ +DWI3CIBIData ibi_data;struct {uint8_t id;uint8_t cmd_resp_queue_capacity_bytes;uint16_t tx_rx_queue_capacity_bytes; +uint8_t ibi_queue_capacity_bytes;uint8_t num_addressable_devices;uint16_t dev_addr_table_pointer;uint16_t dev_addr_table_depth;
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
PATCH 14/19 hw/i3c/dw-i3c: Add ctrl MMIO handling
In reply to Joe KomlodiAdds functionality to the CTRL register.
--- hw/i3c/dw-i3c.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)
hw/i3c/dw-i3c.c +35 -0
@@ -361,6 +361,8 @@ static const uint32_t dw_i3c_ro[DW_I3C_NR_REGS] = { [R_SLAVE_CONFIG] = 0xffffffff, }; +static void dw_i3c_cmd_queue_execute (DWI3C *s); +static inline bool dw_i3c_has_hdr_ts (DWI3C *s) {return ARRAY_FIELD_EX32 (s->regs,HW_CAPABILITY ,HDR_TS );
@@ -520,6 +522,36 @@ static int dw_i3c_recv_data(DWI3C *s, bool is_i2c, uint8_t *data,return ret; } +static void dw_i3c_ctrl_w (DWI3C *s,uint32_t val) +{ +/* +* If the user is setting I3C_RESUME, the controller was halted. +* Try and resume execution and leave the bit cleared. +*/ +if (FIELD_EX32 (val,DEVICE_CTRL ,I3C_RESUME )) { +dw_i3c_cmd_queue_execute (s); + val =FIELD_DP32 (val,DEVICE_CTRL ,I3C_RESUME ,0 ); + } +/* +* I3C_ABORT being set sends an I3C STOP. It's cleared when the STOP is +* sent. +*/ +if (FIELD_EX32 (val,DEVICE_CTRL ,I3C_ABORT )) { +dw_i3c_end_transfer (s,/*is_i2c=*/ true); +dw_i3c_end_transfer (s,/*is_i2c=*/ false); + val =FIELD_DP32 (val,DEVICE_CTRL ,I3C_ABORT ,0 ); +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,TRANSFER_ABORT ,1 ); +dw_i3c_update_irq (s); + } +/* Update present state. */ +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_ST_STATUS , +DW_I3C_TRANSFER_STATE_IDLE ); +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_STATUS , +DW_I3C_TRANSFER_STATUS_IDLE ); + + s->regs[R_DEVICE_CTRL ] = val; +} +static inline bool dw_i3c_target_is_i2c (DWI3C *s,uint16_t offset) {/* / sizeof(uint32_t) because we're indexing into our 32-bit reg array. */
@@ -1592,6 +1624,9 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,"] = 0x%08" PRIx64"\n" , __func__, offset, value);break ; +case R_DEVICE_CTRL : +dw_i3c_ctrl_w (s, val32); +break ;case R_RX_TX_DATA_PORT :dw_i3c_push_tx (s, val32);break ;
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
RE: [PATCH 14/19] hw/i3c/dw-i3c: Add ctrl MMIO handling
Quoted 71 lines
Subject: [PATCH 14/19] hw/i3c/dw-i3c: Add ctrl MMIO handling
Adds functionality to the CTRL register.
Signed-off-by Joe Komlodi <[email protected]>Reviewed-by Titus Rwantare <[email protected]>Reviewed-by Patrick Venture <[email protected]>--- hw/i3c/dw-i3c.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)hw/i3c/dw-i3c.c index c5af331ac4..61845c909f renamed from hw/i3c/dw-i3c.c +0
-0100644
hw/i3c/dw-i3c.c +2
-1@@ -361,6 +361,8 @@ static const uint32_t dw_i3c_ro[DW_I3C_NR_REGS] = { [R_SLAVE_CONFIG] = 0xffffffff, }; +static void dw_i3c_cmd_queue_execute (DWI3C *s); +static inline bool dw_i3c_has_hdr_ts (DWI3C *s) { return ARRAY_FIELD_EX32(s->regs, HW_CAPABILITY, HDR_TS); @@ -520,6 +522,36 @@ static int dw_i3c_recv_data(DWI3C *s, bool is_i2c, uint8_t*data,
return ret;}
hw/i3c/dw-i3c.c +32
-0+static void dw_i3c_ctrl_w (DWI3C *s,uint32_t val) { +/* +* If the user is setting I3C_RESUME, the controller was halted. +* Try and resume execution and leave the bit cleared. +*/ +if (FIELD_EX32 (val,DEVICE_CTRL ,I3C_RESUME )) { +dw_i3c_cmd_queue_execute (s); + val =FIELD_DP32 (val,DEVICE_CTRL ,I3C_RESUME ,0 ); + } +/* +* I3C_ABORT being set sends an I3C STOP. It's cleared when the STOP is +* sent. +*/ +if (FIELD_EX32 (val,DEVICE_CTRL ,I3C_ABORT )) { +dw_i3c_end_transfer (s,/*is_i2c=*/ true); +dw_i3c_end_transfer (s,/*is_i2c=*/ false); + val =FIELD_DP32 (val,DEVICE_CTRL ,I3C_ABORT ,0 ); +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,TRANSFER_ABORT ,1 ); +dw_i3c_update_irq (s); + } +/* Update present state. */ +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_ST_STATUS , +DW_I3C_TRANSFER_STATE_IDLE ); +ARRAY_FIELD_DP32 (s->regs,PRESENT_STATE ,CM_TFR_STATUS , +DW_I3C_TRANSFER_STATUS_IDLE ); + + s->regs[R_DEVICE_CTRL ] = val; +} +static inline bool dw_i3c_target_is_i2c (DWI3C *s,uint16_t offset) {/* / sizeof(uint32_t) because we're indexing into our 32-bit reg array. */ @@ -1592,6 +1624,9 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,"] = 0x%08" PRIx64"\n" , __func__, offset, value);break ; +case R_DEVICE_CTRL : +dw_i3c_ctrl_w (s, val32); +break ;case R_RX_TX_DATA_PORT :dw_i3c_push_tx (s, val32);break;
Quoted 2 lines
--
2.50.0.rc1.591.g9c95f17f64-goog
Thanks,
Jamin
PATCH 15/19 hw/i3c/dw-i3c: Add controller resets
In reply to Joe KomlodiAdds behavior to the device reset register.
--- hw/i3c/dw-i3c.c | 117 ++++++++++++++++++++++++++++++++++++++++++++ hw/i3c/trace-events | 1 + 2 files changed, 118 insertions(+)
hw/i3c/dw-i3c.c +117 -0
@@ -877,6 +877,122 @@ static void dw_i3c_intr_force_w(DWI3C *s, uint32_t val)dw_i3c_update_irq (s); } +static void dw_i3c_cmd_queue_reset (DWI3C *s) +{ +fifo32_reset (&s->cmd_queue); + +ARRAY_FIELD_DP32 (s->regs,QUEUE_STATUS_LEVEL ,CMD_QUEUE_EMPTY_LOC , +fifo32_num_free (&s->cmd_queue)); +uint8_t empty_threshold =ARRAY_FIELD_EX32 (s->regs,QUEUE_THLD_CTRL , +CMD_BUF_EMPTY_THLD ); +if (fifo32_num_free (&s->cmd_queue) >= empty_threshold) { +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,CMD_QUEUE_RDY ,1 ); +dw_i3c_update_irq (s); + }; +} + +static void dw_i3c_resp_queue_reset (DWI3C *s) +{ +fifo32_reset (&s->resp_queue); + +ARRAY_FIELD_DP32 (s->regs,QUEUE_STATUS_LEVEL ,RESP_BUF_BLR , +fifo32_num_used (&s->resp_queue)); +/* +* This interrupt will always be cleared because the threshold is a minimum +* of 1 and the queue size is 0. +*/ +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,RESP_RDY ,0 ); +dw_i3c_update_irq (s); +} + +static void dw_i3c_ibi_queue_reset (DWI3C *s) +{ +fifo32_reset (&s->ibi_queue); + +ARRAY_FIELD_DP32 (s->regs,QUEUE_STATUS_LEVEL ,IBI_BUF_BLR , +fifo32_num_used (&s->resp_queue)); +/* +* This interrupt will always be cleared because the threshold is a minimum +* of 1 and the queue size is 0. +*/ +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,IBI_THLD ,0 ); +dw_i3c_update_irq (s); +} + +static void dw_i3c_tx_queue_reset (DWI3C *s) +{ +fifo32_reset (&s->tx_queue); + +ARRAY_FIELD_DP32 (s->regs,DATA_BUFFER_STATUS_LEVEL ,TX_BUF_EMPTY_LOC , +fifo32_num_free (&s->tx_queue)); +/* TX buf is empty, so this interrupt will always be set. */ +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,TX_THLD ,1 ); +dw_i3c_update_irq (s); +} + +static void dw_i3c_rx_queue_reset (DWI3C *s) +{ +fifo32_reset (&s->rx_queue); + +ARRAY_FIELD_DP32 (s->regs,DATA_BUFFER_STATUS_LEVEL ,RX_BUF_BLR , +fifo32_num_used (&s->resp_queue)); +/* +* This interrupt will always be cleared because the threshold is a minimum +* of 1 and the queue size is 0. +*/ +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,RX_THLD ,0 ); +dw_i3c_update_irq (s); +} + +static void dw_i3c_reset (DeviceState *dev) +{ +DWI3C *s =DW_I3C (dev); +trace_dw_i3c_reset (s->cfg.id); + +memcpy (s->regs, dw_i3c_resets,sizeof (s->regs)); +/* +* The user config for these may differ from our resets array, set them +* manually. +*/ +ARRAY_FIELD_DP32 (s->regs,DEVICE_ADDR_TABLE_POINTER ,ADDR , + s->cfg.dev_addr_table_pointer); +ARRAY_FIELD_DP32 (s->regs,DEVICE_ADDR_TABLE_POINTER ,DEPTH , + s->cfg.dev_addr_table_depth); +ARRAY_FIELD_DP32 (s->regs,DEV_CHAR_TABLE_POINTER , +P_DEV_CHAR_TABLE_START_ADDR , + s->cfg.dev_char_table_pointer); +ARRAY_FIELD_DP32 (s->regs,DEV_CHAR_TABLE_POINTER ,DEV_CHAR_TABLE_DEPTH , + s->cfg.dev_char_table_depth); + +dw_i3c_cmd_queue_reset (s); +dw_i3c_resp_queue_reset (s); +dw_i3c_ibi_queue_reset (s); +dw_i3c_tx_queue_reset (s); +dw_i3c_rx_queue_reset (s); +} + +static void dw_i3c_reset_ctrl_w (DWI3C *s,uint32_t val) +{ +if (FIELD_EX32 (val,RESET_CTRL ,CORE_RESET )) { +dw_i3c_reset (DEVICE (s)); + } +if (FIELD_EX32 (val,RESET_CTRL ,CMD_QUEUE_RESET )) { +dw_i3c_cmd_queue_reset (s); + } +if (FIELD_EX32 (val,RESET_CTRL ,RESP_QUEUE_RESET )) { +dw_i3c_resp_queue_reset (s); + } +if (FIELD_EX32 (val,RESET_CTRL ,TX_BUF_RESET )) { +dw_i3c_tx_queue_reset (s); + } +if (FIELD_EX32 (val,RESET_CTRL ,RX_BUF_RESET )) { +dw_i3c_rx_queue_reset (s); + } +if (FIELD_EX32 (val,RESET_CTRL ,IBI_QUEUE_RESET )) { +dw_i3c_ibi_queue_reset (s); + } +} +static uint32_t dw_i3c_pop_rx (DWI3C *s) {if (fifo32_is_empty (&s->rx_queue)) {
@@ -1634,6 +1750,7 @@ static void dw_i3c_write(void *opaque, hwaddr offset, uint64_t value,dw_i3c_cmd_queue_port_w (s, val32);break ;case R_RESET_CTRL : +dw_i3c_reset_ctrl_w (s, val32);break ;case R_INTR_STATUS :dw_i3c_intr_status_w (s, val32);
hw/i3c/trace-events +1 -0
@@ -11,6 +11,7 @@ dw_i3c_send(uint32_t deviceid, uint32_t num_bytes) "I3C Dev[%u] send %" PRId32 " dw_i3c_recv_data(uint32_t deviceid, uint32_t num_bytes) "I3C Dev[%u] recv %" PRId32 " bytes from bus" dw_i3c_ibi_recv(uint32_t deviceid, uint8_t ibi_byte) "I3C Dev[%u] recv IBI byte 0x%" PRIx8 dw_i3c_ibi_handle(uint32_t deviceid, uint8_t addr, bool rnw) "I3C Dev[%u] handle IBI from address 0x%" PRIx8 " RnW=%d" +dw_i3c_reset(uint32_t deviceid) "I3C Dev[%u] reset" dw_i3c_pop_rx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] pop 0x%" PRIx32 " from RX FIFO" dw_i3c_resp_queue_push(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to response queue" dw_i3c_push_tx(uint32_t deviceid, uint32_t data) "I3C Dev[%u] push 0x%" PRIx32 " to TX FIFO"
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
RE: [PATCH 15/19] hw/i3c/dw-i3c: Add controller resets
Quoted 162 lines
Subject: [PATCH 15/19] hw/i3c/dw-i3c: Add controller resets
Adds behavior to the device reset register.
Signed-off-by Joe Komlodi <[email protected]>Reviewed-by Patrick Venture <[email protected]>Reviewed-by Stephen Longfield <[email protected]>--- hw/i3c/dw-i3c.c | 117 ++++++++++++++++++++++++++++++++++++++++++++ hw/i3c/trace-events | 1 + 2 files changed, 118 insertions(+)hw/i3c/dw-i3c.c index 61845c909f..fff3a3591f renamed from hw/i3c/dw-i3c.c +0
-0100644
hw/i3c/dw-i3c.c +7
-0@@ -877,6 +877,122 @@ static void dw_i3c_intr_force_w(DWI3C *s, uint32_t val)dw_i3c_update_irq (s ); } +static void dw_i3c_cmd_queue_reset (DWI3C *s) { +fifo32_reset (&s->cmd_queue); + +ARRAY_FIELD_DP32 (s->regs,QUEUE_STATUS_LEVEL ,CMD_QUEUE_EMPTY_LOC , +fifo32_num_free (&s->cmd_queue)); + uint8_t empty_threshold = ARRAY_FIELD_EX32(s->regs, QUEUE_THLD_CTRL, +
CMD_BUF_EMPTY_THLD);hw/i3c/dw-i3c.c +13
-0+if (fifo32_num_free (&s->cmd_queue) >= empty_threshold) { +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,CMD_QUEUE_RDY ,1 ); +dw_i3c_update_irq (s); + }; +} + +static void dw_i3c_resp_queue_reset (DWI3C *s) { +fifo32_reset (&s->resp_queue); + +ARRAY_FIELD_DP32 (s->regs,QUEUE_STATUS_LEVEL ,RESP_BUF_BLR , +fifo32_num_used (&s->resp_queue)); +/* +* This interrupt will always be cleared because the threshold is a minimum
hw/i3c/dw-i3c.c +13
-0+* of 1 and the queue size is 0. +*/ +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,RESP_RDY ,0 ); +dw_i3c_update_irq (s); +} + +static void dw_i3c_ibi_queue_reset (DWI3C *s) { +fifo32_reset (&s->ibi_queue); + +ARRAY_FIELD_DP32 (s->regs,QUEUE_STATUS_LEVEL ,IBI_BUF_BLR , +fifo32_num_used (&s->resp_queue)); +/* +* This interrupt will always be cleared because the threshold is a minimum
hw/i3c/dw-i3c.c +10
-0+* of 1 and the queue size is 0. +*/ +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,IBI_THLD ,0 ); +dw_i3c_update_irq (s); +} + +static void dw_i3c_tx_queue_reset (DWI3C *s) { +fifo32_reset (&s->tx_queue); + + ARRAY_FIELD_DP32(s->regs, DATA_BUFFER_STATUS_LEVEL,
TX_BUF_EMPTY_LOC,hw/i3c/dw-i3c.c +10
-0+ fifo32_num_free(&s->tx_queue)); +/* TX buf is empty, so this interrupt will always be set. */ +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,TX_THLD ,1 ); +dw_i3c_update_irq (s); +} + +static void dw_i3c_rx_queue_reset (DWI3C *s) { +fifo32_reset (&s->rx_queue); + + ARRAY_FIELD_DP32(s->regs, DATA_BUFFER_STATUS_LEVEL,
RX_BUF_BLR,hw/i3c/dw-i3c.c +3
-0+ fifo32_num_used(&s->resp_queue)); +/* +* This interrupt will always be cleared because the threshold is a minimum
hw/i3c/dw-i3c.c +23
-0+* of 1 and the queue size is 0. +*/ +ARRAY_FIELD_DP32 (s->regs,INTR_STATUS ,RX_THLD ,0 ); +dw_i3c_update_irq (s); +} + +static void dw_i3c_reset (DeviceState *dev) { +DWI3C *s =DW_I3C (dev); +trace_dw_i3c_reset (s->cfg.id); + +memcpy (s->regs, dw_i3c_resets,sizeof (s->regs)); +/* +* The user config for these may differ from our resets array, set them +* manually. +*/ +ARRAY_FIELD_DP32 (s->regs,DEVICE_ADDR_TABLE_POINTER ,ADDR , + s->cfg.dev_addr_table_pointer); +ARRAY_FIELD_DP32 (s->regs,DEVICE_ADDR_TABLE_POINTER ,DEPTH , + s->cfg.dev_addr_table_depth); +ARRAY_FIELD_DP32 (s->regs,DEV_CHAR_TABLE_POINTER , +P_DEV_CHAR_TABLE_START_ADDR , + s->cfg.dev_char_table_pointer); + ARRAY_FIELD_DP32(s->regs, DEV_CHAR_TABLE_POINTER,
DEV_CHAR_TABLE_DEPTH,hw/i3c/dw-i3c.c +30
-0+ s->cfg.dev_char_table_depth); + +dw_i3c_cmd_queue_reset (s); +dw_i3c_resp_queue_reset (s); +dw_i3c_ibi_queue_reset (s); +dw_i3c_tx_queue_reset (s); +dw_i3c_rx_queue_reset (s); +} + +static void dw_i3c_reset_ctrl_w (DWI3C *s,uint32_t val) { +if (FIELD_EX32 (val,RESET_CTRL ,CORE_RESET )) { +dw_i3c_reset (DEVICE (s)); + } +if (FIELD_EX32 (val,RESET_CTRL ,CMD_QUEUE_RESET )) { +dw_i3c_cmd_queue_reset (s); + } +if (FIELD_EX32 (val,RESET_CTRL ,RESP_QUEUE_RESET )) { +dw_i3c_resp_queue_reset (s); + } +if (FIELD_EX32 (val,RESET_CTRL ,TX_BUF_RESET )) { +dw_i3c_tx_queue_reset (s); + } +if (FIELD_EX32 (val,RESET_CTRL ,RX_BUF_RESET )) { +dw_i3c_rx_queue_reset (s); + } +if (FIELD_EX32 (val,RESET_CTRL ,IBI_QUEUE_RESET )) { +dw_i3c_ibi_queue_reset (s); + } +} +static uint32_t dw_i3c_pop_rx (DWI3C *s) { if (fifo32_is_empty(&s->rx_queue)) { @@ -1634,6 +1750,7 @@ staticvoid dw_i3c_write(void *opaque, hwaddr offset,
uint64_tvalue,dw_i3c_cmd_queue_port_w(s, val32); break; case R_RESET_CTRL: + dw_i3c_reset_ctrl_w(s, val32); break; case R_INTR_STATUS: dw_i3c_intr_status_w(s, val32); diff --git a/hw/i3c/trace-eventsb/hw/i3c/trace-events index
a262fcce39..39f33d9a50100644hw/i3c/trace-events +0
-0@@ -11,6 +11,7 @@ dw_i3c_send(uint32_t deviceid, uint32_t num_bytes)"I3C Dev[%u] send %" PRId32 "
dw_i3c_recv_data(uint32_t deviceid, uint32_t num_bytes)"I3C Dev[%u] recv
%" PRId32 " bytes from bus"
dw_i3c_ibi_recv(uint32_t deviceid, uint8_t ibi_byte)"I3C Dev[%u] recv IBI
byte 0x%" PRIx8dw_i3c_ibi_handle(uint32_t deviceid, uint8_t addr, bool rnw)"I3C Dev[%u] handle IBI from address 0x%" PRIx8 " RnW=%d" +dw_i3c_reset(uint32_t deviceid) "I3C Dev[%u] reset"
Quoted 8 lines
dw_i3c_pop_rx(uint32_t deviceid, uint32_t data)"I3C Dev[%u] pop 0x%"
PRIx32 " from RX FIFO"
dw_i3c_resp_queue_push(uint32_t deviceid, uint32_t data)"I3C Dev[%u]
push 0x%" PRIx32 " to response queue"
dw_i3c_push_tx(uint32_t deviceid, uint32_t data)"I3C Dev[%u] push 0x%"
PRIx32 " to TX FIFO"
--
2.50.0.rc1.591.g9c95f17f64-goog
Thanks,
Jamin
PATCH 16/19 hw/i3c/aspeed: Add I3C bus get function
In reply to Joe KomlodiTo retrieve the I3C bus object normally, the order is Aspeed I3C -> DW I3C[n] -> bus object, so make a nice wrapper for people to use.
--- hw/i3c/aspeed_i3c.c | 9 +++++++++ include/hw/i3c/aspeed_i3c.h | 2 ++ 2 files changed, 11 insertions(+)
hw/i3c/aspeed_i3c.c +9 -0
@@ -153,6 +153,15 @@ static const MemoryRegionOps aspeed_i3c_ops = { } }; +I3CBus *aspeed_i3c_get_bus (AspeedI3CState *s,uint8_t bus_num) +{ +if (bus_num <ARRAY_SIZE (s->devices)) { +return s->devices[bus_num].bus; + } +/* Developer error, fail fast. */ +g_assert_not_reached (); +} +static void aspeed_i3c_reset (DeviceState *dev) {AspeedI3CState *s =ASPEED_I3C (dev);
include/hw/i3c/aspeed_i3c.h +2 -0
@@ -34,3 +34,5 @@ typedef struct AspeedI3CState { uint8_t id; } AspeedI3CState;#endif /* ASPEED_I3C_H */ + +I3CBus *aspeed_i3c_get_bus (AspeedI3CState *s,uint8_t bus_num);
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
RE: [PATCH 16/19] hw/i3c/aspeed: Add I3C bus get function
Quoted 40 lines
Subject: [PATCH 16/19] hw/i3c/aspeed: Add I3C bus get function
To retrieve the I3C bus object normally, the order is Aspeed I3C -> DW I3C[n] -> bus object, so make a nice wrapper for people to use.
Signed-off-by Joe Komlodi <[email protected]>--- hw/i3c/aspeed_i3c.c | 9 +++++++++ include/hw/i3c/aspeed_i3c.h | 2 ++ 2 files changed, 11 insertions(+)hw/i3c/aspeed_i3c.c index renamed from hw/i3c/aspeed_i3c.c +0
-0
1ad25e5a00..af1ff5bc12100644hw/i3c/aspeed_i3c.c +8
-0@@ -153,6 +153,15 @@ static const MemoryRegionOps aspeed_i3c_ops = { } }; +I3CBus *aspeed_i3c_get_bus (AspeedI3CState *s,uint8_t bus_num) { +if (bus_num <ARRAY_SIZE (s->devices)) { +return s->devices[bus_num].bus; + } +/* Developer error, fail fast. */ +g_assert_not_reached (); +} +static void aspeed_i3c_reset (DeviceState *dev) { AspeedI3CState *s = ASPEED_I3C(dev); diff --git
a/include/hw/i3c/aspeed_i3c.hb/include/hw/i3c/aspeed_i3c.hindex9833292ec0..b3e4d1055c100644include/hw/i3c/aspeed_i3c.h +2
-1@@ -34,3 +34,5 @@ typedef struct AspeedI3CState { uint8_t id; } AspeedI3CState;#endif /* ASPEED_I3C_H */ + +I3CBus *aspeed_i3c_get_bus (AspeedI3CState *s,uint8_t bus_num); --
Quoted 1 line
2.50.0.rc1.591.g9c95f17f64-goog
Thanks,
Jamin
PATCH 17/19 hw/i3c: Add Mock target
In reply to Joe KomlodiAdds a simple i3c device to be used for testing in lieu of a real device.
The mock target supports the following features:
- A buffer that users can read and write to.
- CCC support for commonly used CCCs when probing devices on an I3C bus.
- IBI sending upon receiving a user-defined byte.
--- hw/i3c/Kconfig | 10 + hw/i3c/meson.build | 1 + hw/i3c/mock-i3c-target.c | 311 +++++++++++++++++++++++++++++++ hw/i3c/trace-events | 9 + include/hw/i3c/mock-i3c-target.h | 52 ++++++ 5 files changed, 383 insertions(+) create mode 100644 hw/i3c/mock-i3c-target.c create mode 100644 include/hw/i3c/mock-i3c-target.h
hw/i3c/Kconfig +10 -0
@@ -3,3 +3,13 @@ config I3C config DW_I3C bool + +config I3C_DEVICES + # Device group for i3c devices which can reasonably be user-plugged to any + # board's i3c bus. + bool + +config MOCK_I3C_TARGET + bool + select I3C + default y if I3C_DEVICES
hw/i3c/meson.build +1 -0
@@ -2,4 +2,5 @@ i3c_ss = ss.source_set() i3c_ss.add(when: 'CONFIG_I3C', if_true: files('core.c')) i3c_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_i3c.c')) i3c_ss.add(when: 'CONFIG_DW_I3C', if_true: files('dw-i3c.c')) +i3c_ss.add(when: 'CONFIG_MOCK_I3C_TARGET', if_true: files('mock-i3c-target.c')) system_ss.add_all(when: 'CONFIG_I3C', if_true: i3c_ss)
hw/i3c/mock-i3c-target.c new file +311 -0
311 lines not on this page · raw message
hw/i3c/trace-events +9 -0
@@ -36,3 +36,12 @@ legacy_i2c_recv(uint8_t byte) "Legacy I2C recv 0x%" PRIx8 legacy_i2c_send(uint8_t byte) "Legacy I2C send 0x%" PRIx8 legacy_i2c_start_transfer(uint8_t address, bool is_recv) "Legacy I2C START with address 0x%" PRIx8 " is_recv=%d" legacy_i2c_end_transfer(void) "Legacy I2C STOP" + +# mock-target.c +mock_i3c_target_rx(uint8_t byte) "I3C mock target read 0x%" PRIx8 +mock_i3c_target_tx(uint8_t byte) "I3C mock target write 0x%" PRIx8 +mock_i3c_target_event(uint8_t event) "I3C mock target event 0x%" PRIx8 +mock_i3c_target_handle_ccc_read(uint32_t num_read, uint32_t num_to_read) "I3C mock target read %" PRId32 "/%" PRId32 " bytes" +mock_i3c_target_new_ccc(uint8_t ccc) "I3C mock target handle CCC 0x%" PRIx8 +mock_i3c_target_handle_ccc_write(uint32_t num_sent, uint32_t num_to_send) "I3C mock target send %" PRId32 "/%" PRId32 " bytes" +mock_i3c_target_do_ibi(uint8_t address, bool is_recv) "I3C mock target IBI with address 0x%" PRIx8 " RnW=%d"
include/hw/i3c/mock-i3c-target.h new file +52 -0
52 lines not on this page · raw message
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
RE: [PATCH 17/19] hw/i3c: Add Mock target
Quoted 456 lines
Subject: [PATCH 17/19] hw/i3c: Add Mock target
Adds a simple i3c device to be used for testing in lieu of a real device.
The mock target supports the following features:
- A buffer that users can read and write to.
- CCC support for commonly used CCCs when probing devices on an I3C bus.
- IBI sending upon receiving a user-defined byte.Signed-off-by Joe Komlodi <[email protected]>Reviewed-by Titus Rwantare <[email protected]>Reviewed-by Patrick Venture <[email protected]>--- hw/i3c/Kconfig | 10 + hw/i3c/meson.build | 1 + hw/i3c/mock-i3c-target.c | 311 +++++++++++++++++++++++++++++++ hw/i3c/trace-events | 9 + include/hw/i3c/mock-i3c-target.h | 52 ++++++ 5 files changed, 383 insertions(+) create mode 100644 hw/i3c/mock-i3c-target.c create mode 100644
include/hw/i3c/mock-i3c-target.hhw/i3c/Kconfig index ecec77d6fc..d5c6d4049b renamed from hw/i3c/Kconfig +0
-0100644
hw/i3c/Kconfig +3
-0@@ -3,3 +3,13 @@ config I3C config DW_I3C bool + +config I3C_DEVICES + # Device group for i3c devices which can reasonably be user-plugged toany
hw/i3c/Kconfig +7
-0+ # board's i3c bus. + bool + +config MOCK_I3C_TARGET + bool + select I3C + default y if I3C_DEVICEShw/i3c/meson.build index renamed from hw/i3c/meson.build +0
-0
83d75e7d5c..e614b18712100644hw/i3c/meson.build +2
-0@@ -2,4 +2,5 @@ i3c_ss = ss.source_set() i3c_ss.add(when: 'CONFIG_I3C', if_true: files('core.c')) i3c_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_i3c.c')) i3c_ss.add(when: 'CONFIG_DW_I3C', if_true: files('dw-i3c.c')) +i3c_ss.add(when: 'CONFIG_MOCK_I3C_TARGET', if_true: +files('mock-i3c-target.c')) system_ss.add_all(when: 'CONFIG_I3C', if_true: i3c_ss) diff --git
a/hw/i3c/mock-i3c-target.cb/hw/i3c/mock-i3c-target.cnew file mode 100644 index 0000000000..8d42776ecehw/i3c/mock-i3c-target.c new file +76
-0@@ -0,0 +1,311 @@ +/* +* Mock I3C Device +* +* Copyright (c) 2025 Google LLC +* +* The mock I3C device can be thought of as a simple EEPROM. It has a +buffer, +* and the pointer in the buffer is reset to 0 on an I3C STOP. +* To write to the buffer, issue a private write and send data. +* To read from the buffer, issue a private read. +* +* The mock target also supports sending target interrupt IBIs. +* To issue an IBI, set the 'ibi-magic-num' property to a non-zero +number, and +* send that number in a private transaction. The mock target will +issue an IBI +* after 1 second. +* +* It also supports a handful of CCCs that are typically used when +probing I3C +* devices. +* +* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "trace.h" +#include "hw/i3c/i3c.h" +#include "hw/i3c/mock-i3c-target.h" +#include "hw/irq.h" +#include "hw/qdev-properties.h" +#include "qapi/error.h" +#include "qemu/module.h" + +#ifndef MOCK_I3C_TARGET_DEBUG +#define MOCK_I3C_TARGET_DEBUG 0 +#endif + +#define DB_PRINTF (...) do { \ + if (MOCK_I3C_TARGET_DEBUG) { \ + qemu_log("%s: ", __func__); \ + qemu_log(__VA_ARGS__); \ + } \ + } while (0) + +#define IBI_DELAY_NS (1 * 1000 * 1000) + +static uint32_t mock_i3c_target_rx (I3CTarget *i3c,uint8_t *data, +uint32_t num_to_read) { +MockI3cTargetState *s =MOCK_I3C_TARGET (i3c); +uint32_t i; + +/* Bounds check. */ +if (s->p_buf == s->cfg.buf_size) { +return 0 ; + } + +for (i =0 ; i < num_to_read; i++) { + data[i] = s->buf[s->p_buf]; +trace_mock_i3c_target_rx (data[i]); + s->p_buf++; +if (s->p_buf == s->cfg.buf_size) { +break ; + } + } + +/* Return the number of bytes we're sending to the controller. */ +return i; +} + +static void mock_i3c_target_ibi_timer_start (MockI3cTargetState *s) { +int64_t now =qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL ); +timer_mod (&s->qtimer, now +IBI_DELAY_NS ); } + +static int mock_i3c_target_tx (I3CTarget *i3c,const uint8_t *data, + uint32_t num_to_send, uint32_t
*num_sent)hw/i3c/mock-i3c-target.c new file +6
-0+{ +MockI3cTargetState *s =MOCK_I3C_TARGET (i3c); +int ret; +uint32_t to_write; + +if (s->cfg.ibi_magic && num_to_send ==1 && s->cfg.ibi_magic == *data){
hw/i3c/mock-i3c-target.c new file +75
-0+mock_i3c_target_ibi_timer_start (s); +return 0 ; + } + +/* Bounds check. */ +if (num_to_send + s->p_buf > s->cfg.buf_size) { + to_write = s->cfg.buf_size - s->p_buf; + ret =-1 ; + }else { + to_write = num_to_send; + ret =0 ; + } +for (uint32_t i =0 ; i < to_write; i++) { +trace_mock_i3c_target_tx (data[i]); + s->buf[s->p_buf] = data[i]; + s->p_buf++; + } +return ret; +} + +static int mock_i3c_target_event (I3CTarget *i3c,enum I3CEvent event) { +MockI3cTargetState *s =MOCK_I3C_TARGET (i3c); + +trace_mock_i3c_target_event (event); +if (event ==I3C_STOP ) { + s->in_ccc = false; + s->curr_ccc =0 ; + s->ccc_byte_offset =0 ; + s->p_buf =0 ; + } + +return 0 ; +} + +static int mock_i3c_target_handle_ccc_read (I3CTarget *i3c,uint8_t *data, +uint32_t num_to_read, +uint32_t *num_read) { +MockI3cTargetState *s =MOCK_I3C_TARGET (i3c); + +switch (s->curr_ccc) { +case I3C_CCCD_GETMXDS : +/* Default data rate for I3C. */ +while (s->ccc_byte_offset < num_to_read) { +if (s->ccc_byte_offset >=2 ) { +break ; + } + data[s->ccc_byte_offset] =0 ; + *num_read = s->ccc_byte_offset; + s->ccc_byte_offset++; + } +break ; +case I3C_CCCD_GETCAPS : +/* Support I3C version 1.1.x, no other features. */ +while (s->ccc_byte_offset < num_to_read) { +if (s->ccc_byte_offset >=2 ) { +break ; + } +if (s->ccc_byte_offset ==0 ) { + data[s->ccc_byte_offset] =0 ; + }else { + data[s->ccc_byte_offset] =0x01 ; + } + *num_read = s->ccc_byte_offset; + s->ccc_byte_offset++; + } +break ; +case I3C_CCCD_GETMWL : +case I3C_CCCD_GETMRL : +/* MWL/MRL is MSB first. */ +while (s->ccc_byte_offset < num_to_read) { +if (s->ccc_byte_offset >=2 ) { +break ; + } + data[s->ccc_byte_offset] = (s->cfg.buf_size & + (0xff00 >>(
s->ccc_byte_offset* 8))) >>
+ (8 - (s->ccc_byte_offset*
8));hw/i3c/mock-i3c-target.c new file +12
-0+ s->ccc_byte_offset++; + *num_read = num_to_read; + } +break ; +case I3C_CCC_ENTDAA : +case I3C_CCCD_GETPID : +case I3C_CCCD_GETBCR : +case I3C_CCCD_GETDCR : +/* Nothing to do. */ +break ; +default : + qemu_log_mask(LOG_GUEST_ERROR, "Unhandled CCC 0x%.2x\n",
s->curr_ccc);hw/i3c/mock-i3c-target.c new file +8
-0+return -1 ; + } + +trace_mock_i3c_target_handle_ccc_read (*num_read, num_to_read); +return 0 ; +} + +static int mock_i3c_target_handle_ccc_write(I3CTarget *i3c, const uint8_t*data,
hw/i3c/mock-i3c-target.c new file +35
-0+uint32_t num_to_send, + uint32_t *num_sent) { + MockI3cTargetState *s = MOCK_I3C_TARGET(i3c); + +if (!s->curr_ccc) { + s->in_ccc = true; + s->curr_ccc = *data; +trace_mock_i3c_target_new_ccc (s->curr_ccc); + } + + *num_sent =1 ; +switch (s->curr_ccc) { +case I3C_CCC_ENEC : +case I3C_CCCD_ENEC : + s->can_ibi = true; +break ; +case I3C_CCC_DISEC : +case I3C_CCCD_DISEC : + s->can_ibi = false; +break ; +case I3C_CCC_ENTDAA : +case I3C_CCC_SETAASA : +case I3C_CCC_RSTDAA : +case I3C_CCCD_SETDASA : +case I3C_CCCD_GETPID : +case I3C_CCCD_GETBCR : +case I3C_CCCD_GETDCR : +case I3C_CCCD_GETMWL : +case I3C_CCCD_GETMRL : +case I3C_CCCD_GETMXDS : +case I3C_CCCD_GETCAPS : +/* Nothing to do. */ +break ; +default : + qemu_log_mask(LOG_GUEST_ERROR, "Unhandled CCC 0x%.2x\n",
s->curr_ccc);hw/i3c/mock-i3c-target.c new file +18
-0+return -1 ; + } + +trace_mock_i3c_target_handle_ccc_write (*num_sent, num_to_send); +return 0 ; +} + +static void mock_i3c_target_do_ibi (MockI3cTargetState *s) { +if (!s->can_ibi) { +DB_PRINTF ("IBIs disabled by controller" ); +return ; + } + +trace_mock_i3c_target_do_ibi (s->i3c.address, true); +int nack =i3c_target_send_ibi (&s->i3c, s->i3c.address,/*is_recv=*/ true); +/* Getting NACKed isn't necessarily an error, just print it out. */ +if (nack) { + DB_PRINTF("NACKed from controller when sending targetinterrupt.\n");
hw/i3c/mock-i3c-target.c new file +4
-0+ } + nack =i3c_target_ibi_finish (&s->i3c,0x00 ); +if (nack) { + DB_PRINTF("NACKed from controller when finishing targetinterrupt.\n");
hw/i3c/mock-i3c-target.c new file +26
-0+ } +} + +static void mock_i3c_target_timer_elapsed (void *opaque) { +MockI3cTargetState *s =MOCK_I3C_TARGET (opaque); +timer_del (&s->qtimer); +mock_i3c_target_do_ibi (s); +} + +static void mock_i3c_target_reset (I3CTarget *i3c) { +MockI3cTargetState *s =MOCK_I3C_TARGET (i3c); + s->can_ibi = false; +} + +static void mock_i3c_target_realize (DeviceState *dev,Error **errp) { +MockI3cTargetState *s =MOCK_I3C_TARGET (dev); + s->buf =g_new0 (uint8_t, s->cfg.buf_size); +mock_i3c_target_reset (&s->i3c); +} + +static void mock_i3c_target_init (Object *obj) { +MockI3cTargetState *s =MOCK_I3C_TARGET (obj); + s->can_ibi = false; + +/* For IBIs. */ + timer_init_ns(&s->qtimer, QEMU_CLOCK_VIRTUAL,
mock_i3c_target_timer_elapsed,hw/i3c/mock-i3c-target.c new file +6
-0+ s); +} + +static const Property remote_i3c_props[] = { +/* The size of the internal buffer. */ + DEFINE_PROP_UINT32("buf-size", MockI3cTargetState, cfg.buf_size,
0x100),hw/i3c/mock-i3c-target.c new file +35
-0+/* +* If the mock target receives this number, it will issue an IBI after +* 1 second. Disabled if the IBI magic number is 0. +*/ +DEFINE_PROP_UINT8 ("ibi-magic-num" , MockI3cTargetState, +cfg.ibi_magic, 0x00), }; + +static void mock_i3c_target_class_init (ObjectClass *klass,const void +*data) { +DeviceClass *dc =DEVICE_CLASS (klass); +I3CTargetClass *k =I3C_TARGET_CLASS (klass); + + dc->realize = mock_i3c_target_realize; + k->event = mock_i3c_target_event; + k->recv = mock_i3c_target_rx; + k->send = mock_i3c_target_tx; + k->handle_ccc_read = mock_i3c_target_handle_ccc_read; + k->handle_ccc_write = mock_i3c_target_handle_ccc_write; + +device_class_set_props (dc, remote_i3c_props); } + +static const TypeInfo mock_i3c_target_info = { + .name =TYPE_MOCK_I3C_TARGET , + .parent =TYPE_I3C_TARGET , + .instance_size =sizeof (MockI3cTargetState), + .instance_init = mock_i3c_target_init, + .class_init = mock_i3c_target_class_init, +}; + +static void mock_i3c_target_register_types (void ) +{ +type_register_static (&mock_i3c_target_info); +} + +type_init (mock_i3c_target_register_types)hw/i3c/trace-events index renamed from hw/i3c/trace-events +0
-0
39f33d9a50..3d6dd4f7dd100644hw/i3c/trace-events +0
-0@@ -36,3 +36,12 @@ legacy_i2c_recv(uint8_t byte) "Legacy I2C recv 0x%"PRIx8
legacy_i2c_send(uint8_t byte)"Legacy I2C send 0x%" PRIx8legacy_i2c_start_transfer(uint8_t address, bool is_recv)"Legacy I2C START with address 0x%" PRIx8 " is_recv=%d"
legacy_i2c_end_transfer(void)"Legacy I2C STOP"hw/i3c/trace-events +6
-0+ +# mock-target.c +mock_i3c_target_rx(uint8_t byte) "I3C mock target read 0x%" PRIx8 +mock_i3c_target_tx(uint8_t byte) "I3C mock target write 0x%" PRIx8 +mock_i3c_target_event(uint8_t event) "I3C mock target event 0x%" PRIx8 +mock_i3c_target_handle_ccc_read(uint32_t num_read, uint32_t
num_to_read) "I3C mock target read %" PRId32 "/%" PRId32 " bytes"hw/i3c/trace-events +2
-0+mock_i3c_target_new_ccc(uint8_t ccc) "I3C mock target handle CCC 0x%" +PRIx8 mock_i3c_target_handle_ccc_write(uint32_t num_sent, uint32_t
num_to_send) "I3C mock target send %" PRId32 "/%" PRId32 " bytes" +mock_i3c_target_do_ibi(uint8_t address, boolis_recv) "I3C mock target IBI with address 0x%" PRIx8 " RnW=%d"include/hw/i3c/mock-i3c-target.h new file +55
-1@@ -0,0 +1,52 @@ +#ifndef MOCK_I3C_TARGET_H_ +#define MOCK_I3C_TARGET_H_ + +/* +* Mock I3C Device +* +* Copyright (c) 2025 Google LLC +* +* The mock I3C device can be thought of as a simple EEPROM. It has a +buffer, +* and the pointer in the buffer is reset to 0 on an I3C STOP. +* To write to the buffer, issue a private write and send data. +* To read from the buffer, issue a private read. +* +* The mock target also supports sending target interrupt IBIs. +* To issue an IBI, set the 'ibi-magic-num' property to a non-zero +number, and +* send that number in a private transaction. The mock target will +issue an IBI +* after 1 second. +* +* It also supports a handful of CCCs that are typically used when +probing I3C +* devices. +* +* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include "qemu/osdep.h" +#include "qemu/timer.h" +#include "hw/i3c/i3c.h" + +#define TYPE_MOCK_I3C_TARGET "mock-i3c-target" +OBJECT_DECLARE_SIMPLE_TYPE(MockI3cTargetState, MOCK_I3C_TARGET) + +struct MockI3cTargetState { +I3CTarget i3c; + +/* General device state */ +bool can_ibi; +QEMUTimer qtimer; +size_t p_buf; +uint8_t *buf; + +/* For Handing CCCs. */ +bool in_ccc; +I3CCCC curr_ccc; +uint8_t ccc_byte_offset; + +struct { +uint32_t buf_size; +uint8_t ibi_magic; + } cfg; +}; + +#endif --
Quoted 1 line
2.50.0.rc1.591.g9c95f17f64-goog
Thanks,
Jamin
PATCH 18/19 hw/arm/aspeed: Build with I3C_DEVICES
In reply to Joe KomlodiAllows us to attach the mock I3C target
--- hw/arm/Kconfig | 1 + 1 file changed, 1 insertion(+)
hw/arm/Kconfig +1 -0
@@ -532,6 +532,7 @@ config ASPEED_SOC select I2C select I3C select DW_I3C + select I3C_DEVICES select DPS310 select PCA9552 select SERIAL_MM
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
RE: [PATCH 18/19] hw/arm/aspeed: Build with I3C_DEVICES
Quoted 24 lines
Subject: [PATCH 18/19] hw/arm/aspeed: Build with
I3C_DEVICESAllows us to attach the mock I3C target
Signed-off-by Joe Komlodi <[email protected]>--- hw/arm/Kconfig | 1 + 1 file changed, 1 insertion(+)hw/arm/Kconfig index 53d62cd08d..940418b46b renamed from hw/arm/Kconfig +0
-0100644
hw/arm/Kconfig +1
-1@@ -532,6 +532,7 @@ config ASPEED_SOC select I2C select I3C select DW_I3C + select I3C_DEVICES select DPS310 select PCA9552 select SERIAL_MM --
Quoted 1 line
2.50.0.rc1.591.g9c95f17f64-goog
Thanks,
Jamin
PATCH 19/19 hw/i3c: Add hotplug support
In reply to Joe KomlodiThis adds support for hotplugging in I3C.
Conceptually this can be thought of as an I3C target being physically socketed onto a board.
It is then the target's responsibility to go through the hot-join and DAA process so it can participate on the bus.
--- hw/i3c/core.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
hw/i3c/core.c +17 -0
@@ -11,6 +11,7 @@#include "qapi/error.h" #include "trace.h" #include "hw/i3c/i3c.h" +#include "hw/hotplug.h" #include "hw/qdev-properties.h" /*
@@ -26,11 +27,27 @@ static const Property i3c_props[] = { DEFINE_PROP_UINT64("pid", struct I3CTarget, pid, 0), }; +static void i3c_realize (BusState *bus,Error **errp) +{ +qbus_set_bus_hotplug_handler (bus); +} + +static void i3c_class_init (ObjectClass *klass,const void *data) +{ +BusClass *k =BUS_CLASS (klass); + k->realize = i3c_realize; +} +static const TypeInfo i3c_bus_info = { .name =TYPE_I3C_BUS , .parent =TYPE_BUS , .instance_size =sizeof (I3CBus), .class_size =sizeof (I3CBusClass), + .class_init = i3c_class_init, + .interfaces = (InterfaceInfo []) { + {TYPE_HOTPLUG_HANDLER }, + { } + } };I3CBus *i3c_init_bus (DeviceState *parent,const char *name)
Signature · 1 line
2.50.0.rc1.591.g9c95f17f64-goog
Hi
+ Jeremy
Quoted 68 lines · Joe Komlodi
Hi all,
This series adds I3C bus support to QEMU and adds more functionality to the Aspeed I3C controller.
This implementation is a basic implementation that introduces IBIs (including hot-join), CCCs, and SDR data transfer. As-is, it doesn't support multi-controller buses or HDR transfers.
First we add the I3C bus and controller model. With that added we extend the functionality of the Aspeed I3C controller so it can do transfers and handle IBIs.
Next, we add a mock I3C target. It's intended to be a very simple target
just to verify that I3C is working on the guest. Internally, we've used it
on Linux to verify that i3C devices can be probed and can send/receive data
and IBIs.
This target is sort of like an EEPROM, and it can also send IBIs upon
reception of a user-defined magic number.> Lastly we add hotplugging support. The hotplugging doesn't do anything too complicated, it just adds the device attempting to hotplug to the bus. It
is the device's responsibility to hot-join and go through the DAA process
to participate on the bus.Thanks,
JoeJoe Komlodi (19):
hw/misc/aspeed_i3c: Move to i3c directory hw/i3c: Add bus support
hw/i3c: Split DesignWare I3C out of Aspeed I3C hw/i3c/dw-i3c: Add more register fields hw/i3c/aspeed_i3c: Add more register fields hw/i3c/dw-i3c: Add more reset values hw/i3c/aspeed_i3c: Add register RO field masks hw/i3c/dw-i3c: Add register RO field masks hw/i3c/dw-i3c: Treat more registers as read-as-zero hw/i3c/dw-i3c: Use 32 bits on MMIO writes hw/i3c/dw-i3c: Add IRQ MMIO behavior hw/i3c/dw-i3c: Add data TX and RX hw/i3c/dw-i3c: Add IBI handling hw/i3c/dw-i3c: Add ctrl MMIO handling hw/i3c/dw-i3c: Add controller resets hw/i3c/aspeed: Add I3C bus get function hw/i3c: Add Mock target
hw/arm/aspeed: Build withI3C_DEVICEShw/i3c: Add hotplug supporthw/Kconfig | 1 + hw/arm/Kconfig | 3 + hw/i3c/Kconfig | 15 + hw/i3c/aspeed_i3c.c | 261 ++++ hw/i3c/core.c | 669 +++++++++ hw/i3c/dw-i3c.c | 1881 +++++++++++++++++++++++++ hw/i3c/meson.build | 6 + hw/i3c/mock-i3c-target.c | 311 ++++ hw/i3c/trace-events | 47 + hw/i3c/trace.h | 2 + hw/meson.build | 1 + hw/misc/aspeed_i3c.c | 383 ----- hw/misc/meson.build | 1 - hw/misc/trace-events | 6 - include/hw/arm/aspeed_soc.h | 2 +- include/hw/{misc => i3c}/aspeed_i3c.h | 22 +- include/hw/i3c/dw-i3c.h | 201 +++ include/hw/i3c/i3c.h | 277 ++++ include/hw/i3c/mock-i3c-target.h | 52 + meson.build | 1 + 20 files changed, 3735 insertions(+), 407 deletions(-)
Quoted 14 lines
create mode 100644 hw/i3c/Kconfig
create mode 100644hw/i3c/aspeed_i3c.ccreate mode 100644hw/i3c/core.c
create mode 100644hw/i3c/dw-i3c.c
create mode 100644 hw/i3c/meson.build create mode 100644hw/i3c/mock-i3c-target.ccreate mode 100644 hw/i3c/trace-events create mode 100644hw/i3c/trace.h
delete mode 100644hw/misc/aspeed_i3c.crenameinclude/hw/{misc=>i3c}/aspeed_i3c.h(63%) create mode 100644include/hw/i3c/dw-i3c.hcreate mode 100644include/hw/i3c/i3c.hcreate mode 100644include/hw/i3c/mock-i3c-target.h
This lacks a MAINTAINER.
Could you please provide functional tests ? some with a standard I2C device attached to an I3C legacy bus too.
Are there any other stakeholders interested in the I3C to get feedback ?
Have there been any changes since:
https://lore.kernel.org/qemu-devel/[email protected]/
Thanks,
C.
Hi,
Quoted 90 lines · Cédric Le Goater
Hi
+ Jeremy
Quoted 69 lines · Joe Komlodi
Hi all,
This series adds I3C bus support to QEMU and adds more functionality to the Aspeed I3C controller.
This implementation is a basic implementation that introduces IBIs (including hot-join), CCCs, and SDR data transfer. As-is, it doesn't support multi-controller buses or HDR transfers.
First we add the I3C bus and controller model. With that added we extend the functionality of the Aspeed I3C controller so it can do transfers and handle IBIs.
Next, we add a mock I3C target. It's intended to be a very simple target just to verify that I3C is working on the guest. Internally, we've used it on Linux to verify that i3C devices can be probed and can send/receive data and IBIs.
This target is sort of like an EEPROM, and it can also send IBIs upon reception of a user-defined magic number.>
Lastly we add hotplugging support. The hotplugging doesn't do anything too complicated, it just adds the device attempting to hotplug to the bus. It is the device's responsibility to hot-join and go through the DAA process to participate on the bus.Thanks,
JoeJoe Komlodi (19):
hw/misc/aspeed_i3c: Move to i3c directory hw/i3c: Add bus support
hw/i3c: Split DesignWare I3C out of Aspeed I3C hw/i3c/dw-i3c: Add more register fields hw/i3c/aspeed_i3c: Add more register fields hw/i3c/dw-i3c: Add more reset values hw/i3c/aspeed_i3c: Add register RO field masks hw/i3c/dw-i3c: Add register RO field masks hw/i3c/dw-i3c: Treat more registers as read-as-zero hw/i3c/dw-i3c: Use 32 bits on MMIO writes hw/i3c/dw-i3c: Add IRQ MMIO behavior hw/i3c/dw-i3c: Add data TX and RX hw/i3c/dw-i3c: Add IBI handling hw/i3c/dw-i3c: Add ctrl MMIO handling hw/i3c/dw-i3c: Add controller resets hw/i3c/aspeed: Add I3C bus get function hw/i3c: Add Mock target
hw/arm/aspeed: Build withI3C_DEVICEShw/i3c: Add hotplug supporthw/Kconfig | 1 + hw/arm/Kconfig | 3 + hw/i3c/Kconfig | 15 + hw/i3c/aspeed_i3c.c | 261 ++++ hw/i3c/core.c | 669 +++++++++ hw/i3c/dw-i3c.c | 1881 +++++++++++++++++++++++++ hw/i3c/meson.build | 6 + hw/i3c/mock-i3c-target.c | 311 ++++ hw/i3c/trace-events | 47 + hw/i3c/trace.h | 2 + hw/meson.build | 1 + hw/misc/aspeed_i3c.c | 383 ----- hw/misc/meson.build | 1 - hw/misc/trace-events | 6 - include/hw/arm/aspeed_soc.h | 2 +- include/hw/{misc => i3c}/aspeed_i3c.h | 22 +- include/hw/i3c/dw-i3c.h | 201 +++ include/hw/i3c/i3c.h | 277 ++++ include/hw/i3c/mock-i3c-target.h | 52 + meson.build | 1 + 20 files changed, 3735 insertions(+), 407 deletions(-)Quoted 14 lines
create mode 100644 hw/i3c/Kconfig
create mode 100644hw/i3c/aspeed_i3c.ccreate mode 100644hw/i3c/core.c
create mode 100644hw/i3c/dw-i3c.c
create mode 100644 hw/i3c/meson.build create mode 100644hw/i3c/mock-i3c-target.ccreate mode 100644 hw/i3c/trace-events create mode 100644hw/i3c/trace.h
delete mode 100644hw/misc/aspeed_i3c.crenameinclude/hw/{misc=>i3c}/aspeed_i3c.h(63%) create mode 100644include/hw/i3c/dw-i3c.hcreate mode 100644include/hw/i3c/i3c.hcreate mode 100644include/hw/i3c/mock-i3c-target.h
Quoted 1 line
This lacks a MAINTAINER.
Ah, right. I can add that in v2. I can add myself to it, is there anyone else who should be on it?
Quoted 3 lines
Could you please provide functional tests ? some with a standard I2C device attached to an I3C legacy bus too.
I can work on that, probably v2 or v3 depending on how long it takes.
Quoted 7 lines
Are there any other stakeholders interested in the I3C to get feedback ?
Have there been any changes since:
https://lore.kernel.org/qemu-devel/[email protected]/
Nothing too substantial. I decided not to upstream remote I3C since it's unlikely it would be useful upstream.
I think there might be a couple bugfixes in the DwC controller as well, but I don't remember off-hand what they were. If there were any, they were all minor.
Thanks,
Joe
Quoted 3 lines
Thanks,
C.
Hi,
Quoted 4 lines
Quoted 1 line
This lacks a MAINTAINER.
Ah, right. I can add that in v2. I can add myself to it, is there anyone else who should be on it?
Would any of your colleagues be interested too ?
Quoted 4 lines
Quoted 2 lines
Could you please provide functional tests ? some with a standard I2C device attached to an I3C legacy bus too.
I can work on that, probably v2 or v3 depending on how long it takes.
It can come later.
Quoted 4 lines
Quoted 4 lines
Are there any other stakeholders interested in the I3C to get feedback ?
Have there been any changes since:
Quoted 8 lines
Quoted 2 lines
https://lore.kernel.org/qemu-devel/[email protected]/Nothing too substantial. I decided not to upstream remote I3C since it's unlikely it would be useful upstream.
I think there might be a couple bugfixes in the DwC controller as well, but I don't remember off-hand what they were. If there were any, they were all minor.
The code looks code AFAICT but we need someone with a minimum I3C knowledge to take a look. Could the Linux maintainers help review this series ?
Thanks,
C.
Hi Joe,
Quoted 80 lines
Subject: [PATCH 00/19] i3c: aspeed: Add I3C support
Hi all,
This series adds I3C bus support to QEMU and adds more functionality to the Aspeed I3C controller.
This implementation is a basic implementation that introduces IBIs (including hot-join), CCCs, and SDR data transfer. As-is, it doesn't support multi-controller buses or HDR transfers.
First we add the I3C bus and controller model. With that added we extend the functionality of the Aspeed I3C controller so it can do transfers and handle IBIs.
Next, we add a mock I3C target. It's intended to be a very simple target just to verify that I3C is working on the guest. Internally, we've used it on Linux to verify that i3C devices can be probed and can send/receive data and IBIs. This target is sort of like an EEPROM, and it can also send IBIs upon reception of a user-defined magic number.
Lastly we add hotplugging support. The hotplugging doesn't do anything too complicated, it just adds the device attempting to hotplug to the bus. It is the device's responsibility to hot-join and go through the DAA process to participate on the bus.
Thanks,
JoeJoe Komlodi (19):
hw/misc/aspeed_i3c: Move to i3c directory hw/i3c: Add bus support
hw/i3c: Split DesignWare I3C out of Aspeed I3C hw/i3c/dw-i3c: Add more register fields hw/i3c/aspeed_i3c: Add more register fields hw/i3c/dw-i3c: Add more reset values hw/i3c/aspeed_i3c: Add register RO field masks hw/i3c/dw-i3c: Add register RO field masks hw/i3c/dw-i3c: Treat more registers as read-as-zero hw/i3c/dw-i3c: Use 32 bits on MMIO writes hw/i3c/dw-i3c: Add IRQ MMIO behavior hw/i3c/dw-i3c: Add data TX and RX hw/i3c/dw-i3c: Add IBI handling hw/i3c/dw-i3c: Add ctrl MMIO handling hw/i3c/dw-i3c: Add controller resets hw/i3c/aspeed: Add I3C bus get function hw/i3c: Add Mock target
hw/arm/aspeed: Build withI3C_DEVICEShw/i3c: Add hotplug supporthw/Kconfig | 1 + hw/arm/Kconfig | 3 + hw/i3c/Kconfig | 15 + hw/i3c/aspeed_i3c.c | 261 ++++ hw/i3c/core.c | 669 +++++++++ hw/i3c/dw-i3c.c | 1881 +++++++++++++++++++++++++ hw/i3c/meson.build | 6 + hw/i3c/mock-i3c-target.c | 311 ++++ hw/i3c/trace-events | 47 + hw/i3c/trace.h | 2 + hw/meson.build | 1 + hw/misc/aspeed_i3c.c | 383 ----- hw/misc/meson.build | 1 - hw/misc/trace-events | 6 - include/hw/arm/aspeed_soc.h | 2 +- include/hw/{misc => i3c}/aspeed_i3c.h | 22 +- include/hw/i3c/dw-i3c.h | 201 +++ include/hw/i3c/i3c.h | 277 ++++ include/hw/i3c/mock-i3c-target.h | 52 + meson.build | 1 + 20 files changed, 3735 insertions(+), 407 deletions(-) create mode 100644hw/i3c/Kconfig create mode 100644
hw/i3c/aspeed_i3c.ccreate mode 100644hw/i3c/core.ccreate mode 100644hw/i3c/dw-i3c.ccreate mode 100644 hw/i3c/meson.build create mode 100644hw/i3c/mock-i3c-target.ccreate mode 100644 hw/i3c/trace-events create mode 100644hw/i3c/trace.hdelete mode 100644hw/misc/aspeed_i3c.crenameinclude/hw/{misc=>i3c}/aspeed_i3c.h(63%) create mode 100644include/hw/i3c/dw-i3c.hcreate mode 100644include/hw/i3c/i3c.hcreate mode 100644include/hw/i3c/mock-i3c-target.h
Quoted 2 lines
--
2.50.0.rc1.591.g9c95f17f64-goog
I tested this series on AST2600, and the results are as follows:
1. QEMU command line
Add the following option to the QEMU command line
-device mock-i3c-target,bus=dw.i3c.5,buf-size=256,ibi-magic-num=0x5a
1. Device enumeration
After booting into Linux, the new device appears on I3C bus 5:
root@ast2600-default:/sys/bus/i3c/devices# ls 0-4cc31020000 0-4cc51180000 0-4cc51181000 1-4cc31020000 1-4cc51180000 1-4cc51181000 4-target 5-0 i3c-0 i3c-1 i3c-2 i3c-3 i3c-4 i3c-5
1. READ/WRITE MOCK EEPROM
I verified private write and read operations using the i3cdev interface
root@ast2600-default:/sys/bus/i3c/devices/5-0# dd if=/tmp/jamin of=/dev/i3c-5-0 0+1 records in 0+1 records out 200 bytes (200B) copied, 0.002032 seconds, 96.1KB/s
root@ast2600-default:/sys/bus/i3c/devices/5-0# hexdump /dev/i3c-5-0 0000000 04cb 2d84 0d80 45e6 6c9a 3d23 9384 b3ef 0000010 f534 3328 5e07 ac94 5cd6 3914 86ad e085 0000020 e047 81e3 af52 bb88 f20c c282 6148 5374 0000030 6b7d 58bf fb1c 2382 121f 1a60 bfb4 1ebd 0000040 8028 0a82 4740 8287 5737 988f 597e 9a67 0000050 a7f7 b0c8 db87 2631 8304 df89 6977 2a82 0000060 12d8 fb73 bcc7 ecd0 eba2 575f a050 02fb 0000070 af4b ffef da5b 5cb3 14a3 7047 17ac d238 0000080 eda6 ae3e ac72 6112 bbbf fbca 844d 035e 0000090 0970 f591 7536 8312 0552 d4fd 817b b323 00000a0 398b e633 df77 59ee fd4e 6922 e4a9 a160 00000b0 d206 96e1 a915 782b 1b53 a9bc 70c6 5670 00000c0 6dfe a3de ca1f bd0a 00000c8
root@ast2600-default:/sys/bus/i3c/devices/5-0# hexdump /tmp/jamin 0000000 04cb 2d84 0d80 45e6 6c9a 3d23 9384 b3ef 0000010 f534 3328 5e07 ac94 5cd6 3914 86ad e085 0000020 e047 81e3 af52 bb88 f20c c282 6148 5374 0000030 6b7d 58bf fb1c 2382 121f 1a60 bfb4 1ebd 0000040 8028 0a82 4740 8287 5737 988f 597e 9a67 0000050 a7f7 b0c8 db87 2631 8304 df89 6977 2a82 0000060 12d8 fb73 bcc7 ecd0 eba2 575f a050 02fb 0000070 af4b ffef da5b 5cb3 14a3 7047 17ac d238 0000080 eda6 ae3e ac72 6112 bbbf fbca 844d 035e 0000090 0970 f591 7536 8312 0552 d4fd 817b b323 00000a0 398b e633 df77 59ee fd4e 6922 e4a9 a160 00000b0 d206 96e1 a915 782b 1b53 a9bc 70c6 5670 00000c0 6dfe a3de ca1f bd0a 00000c8
root@ast2600-default:/sys/bus/i3c/devices/5-0# dd if=/dev/i3c-5-0 bs=1 count=200 2>/dev/null | cmp - /tmp/jamin && echo "PASS" || echo "FAIL" PASS
The data read back from /dev/i3c-5-0 matches the original file exactly, and the comparison reports PASS.
This confirms that the mock I3C target works correctly as an EEPROM-like device and that the TX/RX data path through the DW I3C controller model functions as expected on AST2600.
Thanks,
Jamin
Jamin Lin
Tested-byQuoted 150 lines
Subject: RE: [PATCH 00/19] i3c: aspeed: Add I3C support
Hi Joe,
Quoted 7 lines
Subject: [PATCH 00/19] i3c: aspeed: Add I3C support
Hi all,
This series adds I3C bus support to QEMU and adds more functionality to the Aspeed I3C controller.
Quoted 6 lines
This implementation is a basic implementation that introduces IBIs (including hot-join), CCCs, and SDR data transfer. As-is, it doesn't support multi-controller buses or HDR transfers.
First we add the I3C bus and controller model. With that added we extend the functionality of the Aspeed I3C controller so it can do transfers
and handle IBIs.
Quoted 4 lines
Next, we add a mock I3C target. It's intended to be a very simple target just to verify that I3C is working on the guest. Internally, we've used it on Linux to verify that i3C devices can be probed and can
send/receive data and IBIs.
Quoted 64 lines
This target is sort of like an EEPROM, and it can also send IBIs upon reception of a user-defined magic number.
Lastly we add hotplugging support. The hotplugging doesn't do anything too complicated, it just adds the device attempting to hotplug to the bus. It is the device's responsibility to hot-join and go through the DAA process to participate on the bus.
Thanks,
JoeJoe Komlodi (19):
hw/misc/aspeed_i3c: Move to i3c directory hw/i3c: Add bus support
hw/i3c: Split DesignWare I3C out of Aspeed I3C hw/i3c/dw-i3c: Add more register fields hw/i3c/aspeed_i3c: Add more register fields hw/i3c/dw-i3c: Add more reset values hw/i3c/aspeed_i3c: Add register RO field masks hw/i3c/dw-i3c: Add register RO field masks hw/i3c/dw-i3c: Treat more registers as read-as-zero hw/i3c/dw-i3c: Use 32 bits on MMIO writes hw/i3c/dw-i3c: Add IRQ MMIO behavior hw/i3c/dw-i3c: Add data TX and RX hw/i3c/dw-i3c: Add IBI handling hw/i3c/dw-i3c: Add ctrl MMIO handling hw/i3c/dw-i3c: Add controller resets hw/i3c/aspeed: Add I3C bus get function hw/i3c: Add Mock target
hw/arm/aspeed: Build withI3C_DEVICEShw/i3c: Add hotplug supporthw/Kconfig | 1 + hw/arm/Kconfig | 3 + hw/i3c/Kconfig | 15 + hw/i3c/aspeed_i3c.c | 261 ++++ hw/i3c/core.c | 669 +++++++++ hw/i3c/dw-i3c.c | 1881 +++++++++++++++++++++++++ hw/i3c/meson.build | 6 + hw/i3c/mock-i3c-target.c | 311 ++++ hw/i3c/trace-events | 47 + hw/i3c/trace.h | 2 + hw/meson.build | 1 + hw/misc/aspeed_i3c.c | 383 ----- hw/misc/meson.build | 1 - hw/misc/trace-events | 6 - include/hw/arm/aspeed_soc.h | 2 +- include/hw/{misc => i3c}/aspeed_i3c.h | 22 +- include/hw/i3c/dw-i3c.h | 201 +++ include/hw/i3c/i3c.h | 277 ++++ include/hw/i3c/mock-i3c-target.h | 52 + meson.build | 1 + 20 files changed, 3735 insertions(+), 407 deletions(-) create mode100644 hw/i3c/Kconfig create mode 100644
hw/i3c/aspeed_i3c.ccreate mode
100644hw/i3c/core.ccreate mode 100644hw/i3c/dw-i3c.ccreate mode 100644 hw/i3c/meson.build create mode 100644hw/i3c/mock-i3c-target.ccreate mode 100644 hw/i3c/trace-events create mode 100644hw/i3c/trace.hdelete mode 100644hw/misc/aspeed_i3c.crenameinclude/hw/{misc=>i3c}/aspeed_i3c.h(63%) create mode 100644include/hw/i3c/dw-i3c.hcreate mode 100644include/hw/i3c/i3c.hcreate mode 100644include/hw/i3c/mock-i3c-target.hQuoted 2 lines
--
2.50.0.rc1.591.g9c95f17f64-googI tested this series on AST2600, and the results are as follows:
1. QEMU command line
Add the following option to the QEMU command line
-device mock-i3c-target,bus=dw.i3c.5,buf-size=256,ibi-magic-num=0x5a1. Device enumeration
After booting into Linux, the new device appears on I3C bus 5:root@ast2600-default:/sys/bus/i3c/devices# ls 0-4cc31020000 0-4cc51180000 0-4cc51181000 1-4cc31020000 1-4cc51180000 1-4cc51181000 4-target 5-0 i3c-0 i3c-1 i3c-2 i3c-3 i3c-4 i3c-51. READ/WRITE MOCK EEPROM
I verified private write and read operations using the i3cdev interfaceroot@ast2600-default:/sys/bus/i3c/devices/5-0# dd if=/tmp/jamin of=/dev/i3c-5-0 0+1 records in 0+1 records out 200 bytes (200B) copied, 0.002032 seconds, 96.1KB/sroot@ast2600-default:/sys/bus/i3c/devices/5-0# hexdump /dev/i3c-5-0 0000000 04cb 2d84 0d80 45e6 6c9a 3d23 9384 b3ef 0000010 f534 3328 5e07 ac94 5cd6 3914 86ad e085 0000020 e047 81e3 af52 bb88 f20c c282 6148 5374 0000030 6b7d 58bf fb1c 2382 121f 1a60 bfb4 1ebd 0000040 8028 0a82 4740 8287 5737 988f 597e 9a67 0000050 a7f7 b0c8 db87 2631 8304 df89 6977 2a82 0000060 12d8 fb73 bcc7 ecd0 eba2 575f a050 02fb 0000070 af4b ffef da5b 5cb3 14a3 7047 17ac d238 0000080 eda6 ae3e ac72 6112 bbbf fbca 844d 035e 0000090 0970 f591 7536 8312 0552 d4fd 817b b323 00000a0 398b e633 df77 59ee fd4e 6922 e4a9 a160 00000b0 d206 96e1 a915 782b 1b53 a9bc 70c6 5670 00000c0 6dfe a3de ca1f bd0a 00000c8root@ast2600-default:/sys/bus/i3c/devices/5-0# hexdump /tmp/jamin 0000000 04cb 2d84 0d80 45e6 6c9a 3d23 9384 b3ef 0000010 f534 3328 5e07 ac94 5cd6 3914 86ad e085 0000020 e047 81e3 af52 bb88 f20c c282 6148 5374 0000030 6b7d 58bf fb1c 2382 121f 1a60 bfb4 1ebd 0000040 8028 0a82 4740 8287 5737 988f 597e 9a67 0000050 a7f7 b0c8 db87 2631 8304 df89 6977 2a82 0000060 12d8 fb73 bcc7 ecd0 eba2 575f a050 02fb 0000070 af4b ffef da5b 5cb3 14a3 7047 17ac d238 0000080 eda6 ae3e ac72 6112 bbbf fbca 844d 035e 0000090 0970 f591 7536 8312 0552 d4fd 817b b323 00000a0 398b e633 df77 59ee fd4e 6922 e4a9 a160 00000b0 d206 96e1 a915 782b 1b53 a9bc 70c6 5670 00000c0 6dfe a3de ca1f bd0a 00000c8root@ast2600-default:/sys/bus/i3c/devices/5-0# dd if=/dev/i3c-5-0 bs=1 count=200 2>/dev/null | cmp - /tmp/jamin && echo "PASS" || echo "FAIL" PASS
Quoted 8 lines
The data read back from
/dev/i3c-5-0matches the original file exactly, and the comparison reports PASS.
This confirms that the mock I3C target works correctly as an EEPROM-like device and that the TX/RX data path through the DW I3C controller model functions as expected on AST2600.Thanks,
Jamin
This patch series,
Thanks,
Jamin
Hello Joe,
Quoted 70 lines · Joe Komlodi
Hi all,
This series adds I3C bus support to QEMU and adds more functionality to the Aspeed I3C controller.
This implementation is a basic implementation that introduces IBIs (including hot-join), CCCs, and SDR data transfer. As-is, it doesn't support multi-controller buses or HDR transfers.
First we add the I3C bus and controller model. With that added we extend the functionality of the Aspeed I3C controller so it can do transfers and handle IBIs.
Next, we add a mock I3C target. It's intended to be a very simple target just to verify that I3C is working on the guest. Internally, we've used it on Linux to verify that i3C devices can be probed and can send/receive data and IBIs.
This target is sort of like an EEPROM, and it can also send IBIs upon reception of a user-defined magic number.Lastly we add hotplugging support. The hotplugging doesn't do anything too complicated, it just adds the device attempting to hotplug to the bus. It is the device's responsibility to hot-join and go through the DAA process to participate on the bus.
Thanks,
JoeJoe Komlodi (19):
hw/misc/aspeed_i3c: Move to i3c directory hw/i3c: Add bus support
hw/i3c: Split DesignWare I3C out of Aspeed I3C hw/i3c/dw-i3c: Add more register fields hw/i3c/aspeed_i3c: Add more register fields hw/i3c/dw-i3c: Add more reset values hw/i3c/aspeed_i3c: Add register RO field masks hw/i3c/dw-i3c: Add register RO field masks hw/i3c/dw-i3c: Treat more registers as read-as-zero hw/i3c/dw-i3c: Use 32 bits on MMIO writes hw/i3c/dw-i3c: Add IRQ MMIO behavior hw/i3c/dw-i3c: Add data TX and RX hw/i3c/dw-i3c: Add IBI handling hw/i3c/dw-i3c: Add ctrl MMIO handling hw/i3c/dw-i3c: Add controller resets hw/i3c/aspeed: Add I3C bus get function hw/i3c: Add Mock target
hw/arm/aspeed: Build withI3C_DEVICEShw/i3c: Add hotplug supporthw/Kconfig | 1 + hw/arm/Kconfig | 3 + hw/i3c/Kconfig | 15 + hw/i3c/aspeed_i3c.c | 261 ++++ hw/i3c/core.c | 669 +++++++++ hw/i3c/dw-i3c.c | 1881 +++++++++++++++++++++++++ hw/i3c/meson.build | 6 + hw/i3c/mock-i3c-target.c | 311 ++++ hw/i3c/trace-events | 47 + hw/i3c/trace.h | 2 + hw/meson.build | 1 + hw/misc/aspeed_i3c.c | 383 ----- hw/misc/meson.build | 1 - hw/misc/trace-events | 6 - include/hw/arm/aspeed_soc.h | 2 +- include/hw/{misc => i3c}/aspeed_i3c.h | 22 +- include/hw/i3c/dw-i3c.h | 201 +++ include/hw/i3c/i3c.h | 277 ++++ include/hw/i3c/mock-i3c-target.h | 52 + meson.build | 1 + 20 files changed, 3735 insertions(+), 407 deletions(-)
Quoted 14 lines
create mode 100644 hw/i3c/Kconfig
create mode 100644hw/i3c/aspeed_i3c.ccreate mode 100644hw/i3c/core.c
create mode 100644hw/i3c/dw-i3c.c
create mode 100644 hw/i3c/meson.build create mode 100644hw/i3c/mock-i3c-target.ccreate mode 100644 hw/i3c/trace-events create mode 100644hw/i3c/trace.h
delete mode 100644hw/misc/aspeed_i3c.crenameinclude/hw/{misc=>i3c}/aspeed_i3c.h(63%) create mode 100644include/hw/i3c/dw-i3c.hcreate mode 100644include/hw/i3c/i3c.hcreate mode 100644include/hw/i3c/mock-i3c-target.h
Could you please resend a v2 with the R-b tags from Jamin ?
Thanks,
C.