drm: ci: fixes
Subsystems (10)
Vignesh Raman
maintainerv7 cover drm: ci: fixes
The patch series contains improvements, enabling new ci jobs which enables testing for Mediatek MT8173, Qualcomm APQ 8016 and VirtIO GPU, fixing issues with the ci jobs and updating the expectation files.
v2:
- Use fdtoverlay command to merge overlay dtbo with the base dtb instead of modifying the kernel sources
- Reworded the commit message for enabling jobs
- Added a new patch in the series to use scripts/config to enable/disable configs
v3:
- New patch in the series to add device tree overlay in arch/arm64/boot/dts/qcom
- drm-ci scripts to use device tree overlay from arch/arm64/boot/dts/qcom and compile base device tree with overlay support
- New patch in the series to enable CONFIG_REGULATOR_DA9211 in defconfig
- Remove CONFIG_RTC_DRV_MT6397=y as it is already enabled in defconfig
v4:
- Drop 'enable CONFIG_REGULATOR_DA9211 in defconfig' patch as it is sent upstream as a seperate patch
- Use apq8016-sbc-usb-host.dtb which allows the USB controllers to work in host mode.
This patch depends on https://lore.kernel.org/lkml/[email protected]/
v5:
- Added a new patch in the series to set IGT_FORCE_DRIVER to 'mediatek' for mt8173
- Added a new patch in the series to make artifacts available for virtio jobs
- Added a new patch in the series to add pipeline url to fails and flakes files
- Generate fails and flakes file with the updated xfails script - https://www.spinics.net/lists/kernel/msg4959630.html
- Drop 'virtio: Update ci variables' patch as the tests which causes the malloc issue are skipped
v6:
- Updated commit message for enable DA9211 regulator fix
- Use GPU_VERSION instead of CI_JOB_NAME to check if it is mt8173 while setting IGT_FORCE_DRIVER
- Added a new patch in the series to uprev IGT to fix memory corruption
- Added a new patch in the series to update drm ci documentation
- Generate fails file with drm-misc-next
v7:
- Fix checkpatch style problems in commit message
- Rework mt8173 IGT_FORCE_DRIVER fix and reword the commit message
Vignesh Raman (10):
drm: ci: igt_runner: Remove todo
drm: ci: Force db410c to host mode
drm: ci: arm64.config: Enable DA9211 regulator
drm: ci: Enable new jobs
drm: ci: Use scripts/config to enable/disable configs
drm: ci: mt8173: Do not set IGT_FORCE_DRIVER to panfrost
drm: ci: virtio: Make artifacts available
drm: ci: uprev IGT
drm/doc: ci: Add IGT version details for flaky tests
drm: ci: Update xfails
Documentation/gpu/automated_testing.rst | 7 +-- drivers/gpu/drm/ci/arm64.config | 1 + drivers/gpu/drm/ci/build.sh | 16 +++---- drivers/gpu/drm/ci/gitlab-ci.yml | 2 +- drivers/gpu/drm/ci/igt_runner.sh | 10 +++- drivers/gpu/drm/ci/test.yml | 13 ++---- .../drm/ci/xfails/mediatek-mt8173-fails.txt | 13 ++++-- .../gpu/drm/ci/xfails/msm-apq8016-fails.txt | 5 ++ .../drm/ci/xfails/virtio_gpu-none-fails.txt | 46 +++++++++++++++++++ 9 files changed, 86 insertions(+), 27 deletions(-)
Signature · 1 line
2.40.1
Vignesh Raman
maintainerPATCH v7 1/10 drm: ci: igt_runner: Remove todo
/sys/kernel/debug/dri/*/state exist for every atomic KMS driver. We do not test non-atomic drivers, so remove the todo.
---
v2:
- No changes
v3:
- No changes
v4:
- No changes
v5:
- No changes
v6:
- No changes
v7:
- No changes
--- drivers/gpu/drm/ci/igt_runner.sh | 1 - 1 file changed, 1 deletion(-)
drivers/gpu/drm/ci/igt_runner.sh +0 -1
@@ -15,7 +15,6 @@ cat /sys/kernel/debug/device_component/* ' # Dump drm state to confirm that kernel was able to find a connected display: -# TODO this path might not exist for all drivers.. maybe run modetest instead? set +e cat /sys/kernel/debug/dri/*/state set -e
Signature · 1 line
2.40.1
Vignesh Raman
maintainerPATCH v7 2/10 drm: ci: Force db410c to host mode
In reply to Vignesh RamanForce db410c to host mode to fix network issue which results in failure to mount root fs via NFS.
See https://gitlab.freedesktop.org/gfx-ci/linux/-/commit/cb72a629
Use apq8016-sbc-usb-host.dtb which allows the USB controllers to work in host mode.
---
v2:
- Use fdtoverlay command to merge overlay dtbo with the base dtb instead of modifying the kernel sources
v3:
- drm-ci scripts to use device tree overlay from arch/arm64/boot/dts/qcom and compile base device tree with overlay support
v4:
- Use apq8016-sbc-usb-host.dtb which allows the USB controllers to work in host mode.
This patch depends on https://lore.kernel.org/lkml/[email protected]/
v5:
- No changes
v6:
- No changes
v7:
- Fix checkpatch style problems in commit message
--- drivers/gpu/drm/ci/build.sh | 2 +- drivers/gpu/drm/ci/test.yml | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
drivers/gpu/drm/ci/build.sh +1 -1
@@ -19,7 +19,7 @@ if [[ "$KERNEL_ARCH" = "arm64" ]]; then DEVICE_TREES+=" arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dtb" DEVICE_TREES+=" arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dtb" DEVICE_TREES+=" arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dtb" - DEVICE_TREES+=" arch/arm64/boot/dts/qcom/apq8016-sbc.dtb" + DEVICE_TREES+=" arch/arm64/boot/dts/qcom/apq8016-sbc-usb-host.dtb" DEVICE_TREES+=" arch/arm64/boot/dts/qcom/apq8096-db820c.dtb" DEVICE_TREES+=" arch/arm64/boot/dts/amlogic/meson-g12b-a311d-khadas-vim3.dtb" DEVICE_TREES+=" arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dtb"
drivers/gpu/drm/ci/test.yml +1 -1
@@ -102,7 +102,7 @@ msm:apq8016: stage: msm variables: DRIVER_NAME: msm - BM_DTB: https://${PIPELINE_ARTIFACTS_BASE}/arm64/apq8016-sbc.dtb + BM_DTB: https://${PIPELINE_ARTIFACTS_BASE}/arm64/apq8016-sbc-usb-host.dtb GPU_VERSION: apq8016 BM_CMDLINE: "ip=dhcp console=ttyMSM0,115200n8 $BM_KERNEL_EXTRA_ARGS root=/dev/nfs rw nfsrootdebug nfsroot=,tcp,nfsvers=4.2 init=/init $BM_KERNELARGS" RUNNER_TAG: google-freedreno-db410c
Signature · 1 line
2.40.1
Vignesh Raman
maintainerPATCH v7 3/10 drm: ci: arm64.config: Enable DA9211 regulator
In reply to Vignesh RamanMediatek mt8173 board fails to boot with DA9211 regulator disabled. Enable CONFIG_REGULATOR_DA9211=y in arm64.config to fix mt8173 boot issue.
---
v2:
- No changes
v3:
- Remove CONFIG_RTC_DRV_MT6397=y as it is already enabled in defconfig
v4:
- No changes
v5:
- No changes
v6:
- Updated commit message
v7:
- No changes
--- drivers/gpu/drm/ci/arm64.config | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/ci/arm64.config +1 -0
@@ -186,6 +186,7 @@ CONFIG_HW_RANDOM_MTK=y CONFIG_MTK_DEVAPC=y CONFIG_PWM_MTK_DISP=y CONFIG_MTK_CMDQ=y +CONFIG_REGULATOR_DA9211=y # For nouveau. Note that DRM must be a module so that it's loaded after NFS is up to provide the firmware. CONFIG_ARCH_TEGRA=y
Signature · 1 line
2.40.1
Vignesh Raman
maintainerPATCH v7 4/10 drm: ci: Enable new jobs
In reply to Vignesh RamanEnable the following jobs, as the issues noted in the TODO comments have been resolved. This will ensure that these jobs are now included and executed as part of the CI/CD pipeline.
msm:apq8016:
TODO: current issue: it is not fiding the NFS root.
mediatek:mt8173:
TODO: current issue: device is hanging.
virtio_gpu:none:
TODO: current issue: malloc(): corrupted top size.
---
v2:
- Reworded the commit message
v3:
- No changes
v4:
- No changes
v5:
- No changes
v6:
- No changes
v7:
- Fix checkpatch style problems in commit message
--- drivers/gpu/drm/ci/test.yml | 9 --------- 1 file changed, 9 deletions(-)
drivers/gpu/drm/ci/test.yml +0 -9
@@ -108,9 +108,6 @@ msm:apq8016: RUNNER_TAG: google-freedreno-db410c script: - ./install/bare-metal/fastboot.sh - rules: - # TODO: current issue: it is not fiding the NFS root. Fix and remove this rule. - - when: never msm:apq8096: extends:
@@ -280,9 +277,6 @@ mediatek:mt8173: DEVICE_TYPE: mt8173-elm-hana GPU_VERSION: mt8173 RUNNER_TAG: mesa-ci-x86-64-lava-mt8173-elm-hana - rules: - # TODO: current issue: device is hanging. Fix and remove this rule. - - when: never mediatek:mt8183: extends:
@@ -340,6 +334,3 @@ virtio_gpu:none: - debian/x86_64_test-gl - testing:x86_64 - igt:x86_64 - rules: - # TODO: current issue: malloc(): corrupted top size. Fix and remove this rule. - - when: never
Signature · 1 line
2.40.1
Vignesh Raman
maintainerPATCH v7 5/10 drm: ci: Use scripts/config to enable/disable configs
In reply to Vignesh RamanInstead of modifying files in git to enable/disable configs, use scripts/config on the .config file which will be used for building the kernel.
---
v2:
- Added a new patch in the series to use scripts/config to enable/disable configs
v3:
- No changes
v4:
- No changes
v5:
- No changes
v6:
- No changes
v7:
- No changes
--- drivers/gpu/drm/ci/build.sh | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/ci/build.sh +7 -7
@@ -75,19 +75,19 @@ else fi fi -for opt in $ENABLE_KCONFIGS; do - echo CONFIG_$opt=y >> drivers/gpu/drm/ci/${KERNEL_ARCH}.config -done -for opt in $DISABLE_KCONFIGS; do - echo CONFIG_$opt=n >> drivers/gpu/drm/ci/${KERNEL_ARCH}.config -done - if [[ -n "${MERGE_FRAGMENT}" ]]; then ./scripts/kconfig/merge_config.sh ${DEFCONFIG} drivers/gpu/drm/ci/${MERGE_FRAGMENT} else make `basename ${DEFCONFIG}` fi +for opt in $ENABLE_KCONFIGS; do + ./scripts/config --enable CONFIG_$opt +done +for opt in $DISABLE_KCONFIGS; do + ./scripts/config --disable CONFIG_$opt +done + make ${KERNEL_IMAGE_NAME} mkdir -p /lava-files/
Signature · 1 line
2.40.1
Vignesh Raman
maintainerPATCH v7 6/10 drm: ci: mt8173: Do not set IGT_FORCE_DRIVER to panfrost
In reply to Vignesh RamanMediatek 8173 and 8183 SOCs have a separate display controller and GPU with different drivers for each. For mt8173, the GPU driver is powervr and the display driver is mediatek. In the case of mt8183, the GPU driver is panfrost and the display driver is mediatek. Setting IGT_FORCE_DRIVER to panfrost for mt8173 is not the expected driver. So set mediatek for mt8173.
Support to test both GPU and display drivers for these ARM SOCs will be added in the next patch series to increase test coverage.
---
v5:
- Added a new patch in the series to set IGT_FORCE_DRIVER to 'mediatek' for mt8173
v6:
- Use GPU_VERSION instead of CI_JOB_NAME to check if it is mt8173
v7:
- Rework the fix and reword commit message
--- drivers/gpu/drm/ci/igt_runner.sh | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/gpu/drm/ci/igt_runner.sh +8 -1
@@ -20,9 +20,16 @@ cat /sys/kernel/debug/dri/*/state set -e case "$DRIVER_NAME" in - rockchip|mediatek|meson) + rockchip|meson) export IGT_FORCE_DRIVER="panfrost" ;; + mediatek) + if [ "$GPU_VERSION" = "mt8173" ]; then + export IGT_FORCE_DRIVER=${DRIVER_NAME} + elif [ "$GPU_VERSION" = "mt8183" ]; then + export IGT_FORCE_DRIVER="panfrost" + fi + ;; amdgpu) # Cannot use HWCI_KERNEL_MODULES as at that point we don't have the module in /lib mv /install/modules/lib/modules/* /lib/modules/.
Signature · 1 line
2.40.1
Vignesh Raman
maintainerPATCH v7 7/10 drm: ci: virtio: Make artifacts available
In reply to Vignesh RamanThere were no artifacts available for virtio job. So make the artifacts available in the pipeline job.
---
v5:
- Added a new patch in the series to make artifacts available for virtio jobs
v6:
- No changes
v7:
- No changes
--- drivers/gpu/drm/ci/test.yml | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/ci/test.yml +2 -0
@@ -329,6 +329,8 @@ virtio_gpu:none: script: - ln -sf $CI_PROJECT_DIR/install /install - mv install/bzImage /lava-files/bzImage + - mkdir -p $CI_PROJECT_DIR/results + - ln -sf $CI_PROJECT_DIR/results /results - install/crosvm-runner.sh install/igt_runner.sh needs: - debian/x86_64_test-gl
Signature · 1 line
2.40.1
Vignesh Raman
maintainerPATCH v7 8/10 drm: ci: uprev IGT
In reply to Vignesh Ramanvirtio-gpu kernel driver reports 16 for count_crtcs which exceeds IGT_MAX_PIPES set to 8 in igt-gpu-tools. This results in below memory corruption,
malloc(): corrupted top size
Received signal SIGABRT.
Stack trace:
#0 [fatal_sig_handler+0x17b]
#1 [__sigaction+0x40]
#2 [pthread_key_delete+0x14c]
#3 [gsignal+0x12]
#4 [abort+0xd3]
#5 [__fsetlocking+0x290]
#6 [timer_settime+0x37a]
#7 [__default_morecore+0x1f1b]
#8 [__libc_calloc+0x161]
#9 [drmModeGetPlaneResources+0x44]
#10 [igt_display_require+0x194]
#11 [__igt_unique____real_main1356+0x93c]
#12 [main+0x3f]
#13 [__libc_init_first+0x8a]
#14 [__libc_start_main+0x85]
#15 [_start+0x21]
This is fixed in igt-gpu-tools by increasing IGT_MAX_PIPES to 16.
https://patchwork.freedesktop.org/series/126327/
Uprev IGT to include the patches which fixes this issue.
---
v6:
- Added a new patch in the series to uprev IGT to fix memory corruption
v7:
- No changes
--- drivers/gpu/drm/ci/gitlab-ci.yml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/ci/gitlab-ci.yml +1 -1
@@ -5,7 +5,7 @@ variables: UPSTREAM_REPO: git://anongit.freedesktop.org/drm/drm TARGET_BRANCH: drm-next - IGT_VERSION: d1db7333d9c5fbbb05e50b0804123950d9dc1c46 + IGT_VERSION: d2af13d9f5be5ce23d996e4afd3e45990f5ab977 DEQP_RUNNER_GIT_URL: https://gitlab.freedesktop.org/anholt/deqp-runner.git DEQP_RUNNER_GIT_TAG: v0.15.0
Signature · 1 line
2.40.1
Vignesh Raman
maintainerPATCH v7 9/10 drm/doc: ci: Add IGT version details for flaky tests
In reply to Vignesh RamanDocument the IGT version in the flaky tests reporting template.
---
v6:
- Added a new patch in the series to update drm ci documentation
v7:
- No changes
--- Documentation/gpu/automated_testing.rst | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
Documentation/gpu/automated_testing.rst +4 -3
@@ -69,14 +69,15 @@ the result. They will still be run. Each new flake entry must be associated with a link to the email reporting the bug to the author of the affected driver, the board name or Device Tree name of -the board, the first kernel version affected, and an approximation of the -failure rate. +the board, the first kernel version affected, the IGT version used for tests, +and an approximation of the failure rate. They should be provided under the following format:: # Bug Report: $LORE_OR_PATCHWORK_URL # Board Name: broken-board.dtb - # Version: 6.6-rc1 + # Linux Version: 6.6-rc1 + # IGT Version: 1.28-gd2af13d9f # Failure Rate: 100 flaky-test
Signature · 1 line
2.40.1
Vignesh Raman
maintainerPATCH v7 10/10 drm: ci: Update xfails
In reply to Vignesh RamanUpdate msm-apq8016-fails, mediatek-mt8173-fails and virtio_gpu-none-fails to include the tests which fail.
---
v2:
- No changes
v3:
- No changes
v4:
- No changes
v5:
- Generate fails and flakes file with the updated xfails script - https://www.spinics.net/lists/kernel/msg4959630.html
v6:
- Generate fails file with drm-misc-next
v7:
- No changes
--- .../drm/ci/xfails/mediatek-mt8173-fails.txt | 13 ++++-- .../gpu/drm/ci/xfails/msm-apq8016-fails.txt | 5 ++ .../drm/ci/xfails/virtio_gpu-none-fails.txt | 46 +++++++++++++++++++ 3 files changed, 61 insertions(+), 3 deletions(-)
drivers/gpu/drm/ci/xfails/mediatek-mt8173-fails.txt +10 -3
@@ -1,5 +1,4 @@ kms_3d,Fail -kms_addfb_basic@addfb25-bad-modifier,Fail kms_bw@linear-tiling-1-displays-1920x1080p,Fail kms_bw@linear-tiling-1-displays-2560x1440p,Fail kms_bw@linear-tiling-1-displays-3840x2160p,Fail
@@ -9,13 +8,19 @@ kms_bw@linear-tiling-2-displays-3840x2160p,Fail kms_bw@linear-tiling-3-displays-1920x1080p,Fail kms_bw@linear-tiling-3-displays-2560x1440p,Fail kms_bw@linear-tiling-3-displays-3840x2160p,Fail +kms_color@invalid-gamma-lut-sizes,Fail kms_color@pipe-A-invalid-gamma-lut-sizes,Fail kms_color@pipe-B-invalid-gamma-lut-sizes,Fail -kms_force_connector_basic@force-connector-state,Fail +kms_cursor_legacy@cursor-vs-flip-atomic,Fail +kms_cursor_legacy@cursor-vs-flip-legacy,Fail +kms_flip@flip-vs-modeset-vs-hang,Fail +kms_flip@flip-vs-panning-vs-hang,Fail +kms_flip@flip-vs-suspend,Fail +kms_flip@flip-vs-suspend-interruptible,Fail kms_force_connector_basic@force-edid,Fail kms_force_connector_basic@force-load-detect,Fail kms_force_connector_basic@prune-stale-modes,Fail -kms_invalid_mode@int-max-clock,Fail +kms_hdmi_inject@inject-4k,Fail kms_plane_scaling@planes-upscale-20x20,Fail kms_plane_scaling@planes-upscale-20x20-downscale-factor-0-25,Fail kms_plane_scaling@planes-upscale-20x20-downscale-factor-0-5,Fail
@@ -27,3 +32,5 @@ kms_properties@get_properties-sanity-atomic,Fail kms_properties@plane-properties-atomic,Fail kms_properties@plane-properties-legacy,Fail kms_rmfb@close-fd,Fail +kms_selftest@drm_format,Timeout +kms_selftest@drm_format_helper,Timeout
drivers/gpu/drm/ci/xfails/msm-apq8016-fails.txt +5 -0
@@ -6,10 +6,15 @@ kms_cursor_legacy@all-pipes-single-bo,Fail kms_cursor_legacy@all-pipes-single-move,Fail kms_cursor_legacy@all-pipes-torture-bo,Fail kms_cursor_legacy@all-pipes-torture-move,Fail +kms_cursor_legacy@forked-bo,Fail +kms_cursor_legacy@forked-move,Fail kms_cursor_legacy@pipe-A-forked-bo,Fail kms_cursor_legacy@pipe-A-forked-move,Fail kms_cursor_legacy@pipe-A-single-bo,Fail kms_cursor_legacy@pipe-A-single-move,Fail kms_cursor_legacy@pipe-A-torture-bo,Fail kms_cursor_legacy@pipe-A-torture-move,Fail +kms_force_connector_basic@force-edid,Fail kms_hdmi_inject@inject-4k,Fail +kms_selftest@drm_format,Timeout +kms_selftest@drm_format_helper,Timeout
drivers/gpu/drm/ci/xfails/virtio_gpu-none-fails.txt +46 -0
58 lines not on this page · raw message
Signature · 1 line
2.40.1
Helen Koike
AppliedQuoted 50 lines · Vignesh Raman
The patch series contains improvements, enabling new ci jobs which enables testing for Mediatek MT8173, Qualcomm APQ 8016 and VirtIO GPU, fixing issues with the ci jobs and updating the expectation files.
v2:
- Use fdtoverlay command to merge overlay dtbo with the base dtb instead of modifying the kernel sources
- Reworded the commit message for enabling jobs
- Added a new patch in the series to usescripts/configto enable/disable configsv3:
- New patch in the series to add device tree overlay inarch/arm64/boot/dts/qcom
- drm-ci scripts to use device tree overlay fromarch/arm64/boot/dts/qcomand compile base device tree with overlay support
- New patch in the series to enableCONFIG_REGULATOR_DA9211in defconfig
- RemoveCONFIG_RTC_DRV_MT6397=yas it is already enabled in defconfigv4:
- Drop 'enableCONFIG_REGULATOR_DA9211in defconfig' patch as it is sent upstream as a seperate patch
- Use apq8016-sbc-usb-host.dtb which allows the USB controllers to work in host mode.This patch depends on https://lore.kernel.org/lkml/[email protected]/v5:
- Added a new patch in the series to setIGT_FORCE_DRIVERto 'mediatek' for mt8173
- Added a new patch in the series to make artifacts available for virtio jobs
- Added a new patch in the series to add pipeline url to fails and flakes files
- Generate fails and flakes file with the updated xfails script - https://www.spinics.net/lists/kernel/msg4959630.html
- Drop 'virtio: Update ci variables' patch as the tests which causes the malloc issue are skippedv6:
- Updated commit message for enable DA9211 regulator fix
- UseGPU_VERSIONinstead ofCI_JOB_NAMEto check if it is mt8173 while settingIGT_FORCE_DRIVER
- Added a new patch in the series to uprev IGT to fix memory corruption
- Added a new patch in the series to update drm ci documentation
- Generate fails file with drm-misc-nextv7:
- Fix checkpatch style problems in commit message
- Rework mt8173IGT_FORCE_DRIVERfix and reword the commit messageVignesh Raman (10):
drm: ci:igt_runner: Remove todo
drm: ci: Force db410c to host mode
drm: ci: arm64.config: Enable DA9211 regulator
drm: ci: Enable new jobs
drm: ci: Usescripts/configto enable/disable configs
drm: ci: mt8173: Do not setIGT_FORCE_DRIVERto panfrost
drm: ci: virtio: Make artifacts available
drm: ci: uprev IGT
drm/doc: ci: Add IGT version details for flaky tests
drm: ci: Update xfails
Quoted 11 lines
Documentation/gpu/automated_testing.rst | 7 +-- drivers/gpu/drm/ci/arm64.config | 1 + drivers/gpu/drm/ci/build.sh | 16 +++---- drivers/gpu/drm/ci/gitlab-ci.yml | 2 +- drivers/gpu/drm/ci/igt_runner.sh | 10 +++- drivers/gpu/drm/ci/test.yml | 13 ++---- .../drm/ci/xfails/mediatek-mt8173-fails.txt | 13 ++++-- .../gpu/drm/ci/xfails/msm-apq8016-fails.txt | 5 ++ .../drm/ci/xfails/virtio_gpu-none-fails.txt | 46 +++++++++++++++++++ 9 files changed, 86 insertions(+), 27 deletions(-)
Applied to drm/drm-misc (drm-misc-next).
Thanks!
Helen