Disabling all ethernet initialisation stuff?
Hi there,
If I disable the ethernet command from U-boot as specified in the README:
#define CONFIG_COMMANDS (CFG_CMD_ALL & ~CFG_CMD_NET)
will this make all ethernet initialisation stuff disappear?
I'm kinda suspecting a bad PHY for being responsible for my u-boot not starting sometimes
(http://article.gmane.org/gmane.comp.boot-loaders.u-boot/19759)...
BR,
Martin Egholm
Quoted 4 lines · In message <[email protected]> you wrote:
If I disable the ethernet command from U-boot as specified in the README:
#defineCONFIG_COMMANDS(CFG_CMD_ALL& ~CFG_CMD_NET)
will this make all ethernet initialisation stuff disappear?
It should. But "(CFG_CMD_ALL & ~CFG_CMD_NET)" will most probably not even compile for any board given.
Best regards,
Wolfgang Denk
Signature · 3 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de I have a very small mind and must live with it. -- Edsger Dijkstra
Quoted 6 lines
Quoted 3 lines
If I disable the ethernet command from U-boot as specified in the README:
#defineCONFIG_COMMANDS(CFG_CMD_ALL& ~CFG_CMD_NET)
will this make all ethernet initialisation stuff disappear?It should. But "(
CFG_CMD_ALL& ~CFG_CMD_NET)" will most probably not even compile for any board given.
Ok, I see your point - I quoted too literally :-)
Thanks Wolfgang,
Martin