Skip to contentSkip to conversation

Disabling all ethernet initialisation stuff?

U-Boot-Users Martin Egholm Nielsen 2 participants 3 messages Dec 13, 2005

lore
Share & tools
lore
#1 lore raw
Quoted 4 lines · In message <[email protected]> you wrote:

If I disable the ethernet command from U-boot as specified in the README:
#define CONFIG_COMMANDS (CFG_CMD_ALL & ~CFG_CMD_NET)
will this make all ethernet initialisation stuff disappear?

It should. But "(CFG_CMD_ALL & ~CFG_CMD_NET)" will most probably not even compile for any board given.

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I have a very small mind and must live with it.    -- Edsger Dijkstra
#2 lore raw
Quoted 6 lines
Quoted 3 lines

If I disable the ethernet command from U-boot as specified in the README:
#define CONFIG_COMMANDS (CFG_CMD_ALL & ~CFG_CMD_NET)
will this make all ethernet initialisation stuff disappear?

It should. But "(CFG_CMD_ALL & ~CFG_CMD_NET)" will most probably not even compile for any board given.

Ok, I see your point - I quoted too literally :-)

Thanks Wolfgang,
Martin