memorder: Adjust height of Table 15.5's header
PATCH 1/1 memorder: Adjust height of Table 15.5's header
From a7e4a7ee67e980055dbef5808b89335fc0eba483 Mon Sep 17 00:00:00 2001
From: Akira Yokosawa <[email protected]>
Date: Wed, 1 Nov 2017 23:14:44 +0900
Subject: [PATCH] memorder: Adjust height of Table 15.5's header
While we are here, for the ease of maintenance of the table, define a helper macro "\cpufml{}" to be used in the header.
Also adjust hspace for 1c layout and comment out a paragraph which is pointless for the moment.
--- memorder/memorder.tex | 45 ++++++++++++++------------------------------- 1 file changed, 14 insertions(+), 31 deletions(-)
memorder/memorder.tex +14 -31
@@ -3980,39 +3980,22 @@ dependencies. \rowcolors{4}{}{lightgray} \small \centering -\renewcommand*{\arraystretch}{1.2}\OneColumnHSpace{-.6in} +\newcommand{\cpufml}[1]{\begin{picture}(6,50)(0,0)\rotatebox{90}{#1}\end{picture}} +\renewcommand*{\arraystretch}{1.2}\OneColumnHSpace{-.35in} \begin{tabular}{llccccccccc} \toprule \multicolumn{2}{l}{~} & \multicolumn{9}{c}{CPU Family} \\ \cmidrule{3-11} \multicolumn{2}{c}{\raisebox{.5ex}{Property}} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{Alpha} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{ARMv8} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{ARMv7-A/R} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{Itanium} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{MIPS} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{\Power{}} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{SPARC TSO} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{x86} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{z~Systems} - \end{picture} + & \cpufml{Alpha} + & \cpufml{ARMv8} + & \cpufml{ARMv7-A/R} + & \cpufml{Itanium} + & \cpufml{MIPS} + & \cpufml{\Power{}} + & \cpufml{SPARC TSO} + & \cpufml{x86} + & \cpufml{z~Systems} \\ \cmidrule(r){1-2} \cmidrule{3-11} % Alpha ARMv8 ARMv7 Itanium MIPS PPC SPARC x86 z Systems
@@ -4070,7 +4053,7 @@ dependencies. ~ & ~ & C: & Compare-and-exchange instruction \\ ~ & ~ & L: & Load-linked/store-conditional instruction \\ \end{tabular} -}\OneColumnHSpace{-0.7in} +}\OneColumnHSpace{-0.4in} \caption{Summary of Memory Ordering} \label{tab:memorder:Summary of Memory Ordering} \end{table*}
@@ -4132,8 +4115,8 @@ instruction cache and pipeline. Such CPUs require special instructions be executed for self-modifying code. -Parenthesized CPU names indicate modes that are architecturally allowed, -but rarely used in practice. +%Parenthesized CPU names indicate modes that are architecturally allowed, +%but rarely used in practice. The common ``just say no'' approach to memory-ordering operations can be eminently reasonable where it applies,
Signature · 1 line
2.7.4
Quoted 5 lines · Akira Yokosawa
Quoted 1 line
From
a7e4a7ee67e980055dbef5808b89335fc0eba483Mon Sep 17 00:00:00 2001From: Akira Yokosawa <[email protected]>
Date: Wed, 1 Nov 2017 23:14:44 +0900
Subject: [PATCH] memorder: Adjust height of Table 15.5's header
Quoted 7 lines
While we are here, for the ease of maintenance of the table, define a helper macro "\cpufml{}" to be used in the header.
Also adjust hspace for 1c layout and comment out a paragraph which is pointless for the moment.
Signed-off-by Akira Yokosawa <[email protected]>
Good catch on the stray paragraph, and \cpufml{} does make things much nicer, thank you!!! Queued and pushed.
There is another tables that could use this trick in locking/locking.tex. I believe that the definitions should be local to each table because the heights differ, and which quite oddly seem to need to be hard-coded.
Thanx, Paul
Quoted 82 lines
--- memorder/memorder.tex | 45 ++++++++++++++------------------------------- 1 file changed, 14 insertions(+), 31 deletions(-)memorder/memorder.tex +14
-31@@ -3980,39 +3980,22 @@ dependencies. \rowcolors{4}{}{lightgray} \small \centering -\renewcommand*{\arraystretch}{1.2}\OneColumnHSpace{-.6in} +\newcommand{\cpufml}[1]{\begin{picture}(6,50)(0,0)\rotatebox{90}{#1}\end{picture}} +\renewcommand*{\arraystretch}{1.2}\OneColumnHSpace{-.35in} \begin{tabular}{llccccccccc} \toprule \multicolumn{2}{l}{~} & \multicolumn{9}{c}{CPU Family} \\ \cmidrule{3-11} \multicolumn{2}{c}{\raisebox{.5ex}{Property}} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{Alpha} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{ARMv8} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{ARMv7-A/R} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{Itanium} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{MIPS} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{\Power{}} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{SPARC TSO} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{x86} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{z~Systems} - \end{picture} + & \cpufml{Alpha} + & \cpufml{ARMv8} + & \cpufml{ARMv7-A/R} + & \cpufml{Itanium} + & \cpufml{MIPS} + & \cpufml{\Power{}} + & \cpufml{SPARC TSO} + & \cpufml{x86} + & \cpufml{z~Systems} \\ \cmidrule(r){1-2} \cmidrule{3-11} % Alpha ARMv8 ARMv7 Itanium MIPS PPC SPARC x86 z Systems@@ -4070,7 +4053,7 @@ dependencies. ~ & ~ & C: & Compare-and-exchange instruction \\ ~ & ~ & L: & Load-linked/store-conditional instruction \\ \end{tabular} -}\OneColumnHSpace{-0.7in} +}\OneColumnHSpace{-0.4in} \caption{Summary of Memory Ordering} \label{tab:memorder:Summary of Memory Ordering} \end{table*}@@ -4132,8 +4115,8 @@ instruction cache and pipeline. Such CPUs require special instructions be executed for self-modifying code. -Parenthesized CPU names indicate modes that are architecturally allowed, -but rarely used in practice. +%Parenthesized CPU names indicate modes that are architecturally allowed, +%but rarely used in practice. The common ``just say no'' approach to memory-ordering operations can be eminently reasonable where it applies,Signature · 1 line
2.7.4
Quoted 12 lines · Paul E. McKenney
Quoted 11 lines · Akira Yokosawa
Quoted 1 line
From
a7e4a7ee67e980055dbef5808b89335fc0eba483Mon Sep 17 00:00:00 2001From: Akira Yokosawa <[email protected]>
Date: Wed, 1 Nov 2017 23:14:44 +0900
Subject: [PATCH] memorder: Adjust height of Table 15.5's headerWhile we are here, for the ease of maintenance of the table, define a helper macro "\cpufml{}" to be used in the header.
Also adjust hspace for 1c layout and comment out a paragraph which is pointless for the moment.
Quoted 8 lines
Quoted 1 line
Signed-off-by Akira Yokosawa <[email protected]>Good catch on the stray paragraph, and \cpufml{} does make things much nicer, thank you!!! Queued and pushed.
There is another tables that could use this trick in locking/locking.tex. I believe that the definitions should be local to each table because the heights differ, and which quite oddly seem to need to be hard-coded.
I see. I'll take care of it tomorrow.
Akira
Quoted 87 lines
Thanx, Paul
Quoted 82 lines
--- memorder/memorder.tex | 45 ++++++++++++++------------------------------- 1 file changed, 14 insertions(+), 31 deletions(-)memorder/memorder.tex +14
-31@@ -3980,39 +3980,22 @@ dependencies. \rowcolors{4}{}{lightgray} \small \centering -\renewcommand*{\arraystretch}{1.2}\OneColumnHSpace{-.6in} +\newcommand{\cpufml}[1]{\begin{picture}(6,50)(0,0)\rotatebox{90}{#1}\end{picture}} +\renewcommand*{\arraystretch}{1.2}\OneColumnHSpace{-.35in} \begin{tabular}{llccccccccc} \toprule \multicolumn{2}{l}{~} & \multicolumn{9}{c}{CPU Family} \\ \cmidrule{3-11} \multicolumn{2}{c}{\raisebox{.5ex}{Property}} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{Alpha} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{ARMv8} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{ARMv7-A/R} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{Itanium} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{MIPS} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{\Power{}} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{SPARC TSO} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{x86} - \end{picture} - & \begin{picture}(6,60)(0,0) - \rotatebox{90}{z~Systems} - \end{picture} + & \cpufml{Alpha} + & \cpufml{ARMv8} + & \cpufml{ARMv7-A/R} + & \cpufml{Itanium} + & \cpufml{MIPS} + & \cpufml{\Power{}} + & \cpufml{SPARC TSO} + & \cpufml{x86} + & \cpufml{z~Systems} \\ \cmidrule(r){1-2} \cmidrule{3-11} % Alpha ARMv8 ARMv7 Itanium MIPS PPC SPARC x86 z Systems@@ -4070,7 +4053,7 @@ dependencies. ~ & ~ & C: & Compare-and-exchange instruction \\ ~ & ~ & L: & Load-linked/store-conditional instruction \\ \end{tabular} -}\OneColumnHSpace{-0.7in} +}\OneColumnHSpace{-0.4in} \caption{Summary of Memory Ordering} \label{tab:memorder:Summary of Memory Ordering} \end{table*}@@ -4132,8 +4115,8 @@ instruction cache and pipeline. Such CPUs require special instructions be executed for self-modifying code. -Parenthesized CPU names indicate modes that are architecturally allowed, -but rarely used in practice. +%Parenthesized CPU names indicate modes that are architecturally allowed, +%but rarely used in practice. The common ``just say no'' approach to memory-ordering operations can be eminently reasonable where it applies,Signature · 1 line
2.7.4
PATCH 1/1 locking: Use helper macro in Table 7.1
In reply to Paul E. McKenneyFrom af9e5f272a12304067120b79a86d6673b605b7b3 Mon Sep 17 00:00:00 2001
From: Akira Yokosawa <[email protected]>
Date: Thu, 2 Nov 2017 07:02:07 +0900
Subject: [PATCH] locking: Use helper macro in Table 7.1
--- locking/locking.tex | 25 +++++++------------------ 1 file changed, 7 insertions(+), 18 deletions(-)
locking/locking.tex +7 -18
@@ -1314,28 +1314,17 @@ or even milliseconds. \begin{table} \renewcommand*{\arraystretch}{1.2} \newcommand{\x}{\textcolor{gray!20}{\rule{7pt}{7pt}}} +\newcommand{\rothead}[1]{\begin{picture}(6,65)(0,0)\rotatebox{90}{#1}\end{picture}} \small \centering \begin{tabular}{lcccccc} \toprule - & \begin{picture}(6,65)(0,0) - \rotatebox{90}{Null (Not Held)} - \end{picture} - & \begin{picture}(6,65)(0,0) - \rotatebox{90}{Concurrent Read} - \end{picture} - & \begin{picture}(6,65)(0,0) - \rotatebox{90}{Concurrent Write} - \end{picture} - & \begin{picture}(6,65)(0,0) - \rotatebox{90}{Protected Read} - \end{picture} - & \begin{picture}(6,65)(0,0) - \rotatebox{90}{Protected Write} - \end{picture} - & \begin{picture}(6,65)(0,0) - \rotatebox{90}{Exclusive} - \end{picture} + & \rothead{Null (Not Held)} + & \rothead{Concurrent Read} + & \rothead{Concurrent Write} + & \rothead{Protected Read} + & \rothead{Protected Write} + & \rothead{Exclusive} \\ % NL CR CW PR PW EX \cmidrule(r){1-1} \cmidrule{2-7}
Signature · 1 line
2.7.4
Paul E. McKenney
AppliedRe: [PATCH] locking: Use helper macro in Table 7.1
Quoted 6 lines · Akira Yokosawa
Quoted 1 line
From
af9e5f272a12304067120b79a86d6673b605b7b3Mon Sep 17 00:00:00 2001From: Akira Yokosawa <[email protected]>
Date: Thu, 2 Nov 2017 07:02:07 +0900
Subject: [PATCH] locking: Use helper macro in Table 7.1Signed-off-by Akira Yokosawa <[email protected]>
Applied, thank you very much!
Thanx, Paul
Quoted 53 lines
--- locking/locking.tex | 25 +++++++------------------ 1 file changed, 7 insertions(+), 18 deletions(-)locking/locking.tex +7
-18@@ -1314,28 +1314,17 @@ or even milliseconds. \begin{table} \renewcommand*{\arraystretch}{1.2} \newcommand{\x}{\textcolor{gray!20}{\rule{7pt}{7pt}}} +\newcommand{\rothead}[1]{\begin{picture}(6,65)(0,0)\rotatebox{90}{#1}\end{picture}} \small \centering \begin{tabular}{lcccccc} \toprule - & \begin{picture}(6,65)(0,0) - \rotatebox{90}{Null (Not Held)} - \end{picture} - & \begin{picture}(6,65)(0,0) - \rotatebox{90}{Concurrent Read} - \end{picture} - & \begin{picture}(6,65)(0,0) - \rotatebox{90}{Concurrent Write} - \end{picture} - & \begin{picture}(6,65)(0,0) - \rotatebox{90}{Protected Read} - \end{picture} - & \begin{picture}(6,65)(0,0) - \rotatebox{90}{Protected Write} - \end{picture} - & \begin{picture}(6,65)(0,0) - \rotatebox{90}{Exclusive} - \end{picture} + & \rothead{Null (Not Held)} + & \rothead{Concurrent Read} + & \rothead{Concurrent Write} + & \rothead{Protected Read} + & \rothead{Protected Write} + & \rothead{Exclusive} \\ % NL CR CW PR PW EX \cmidrule(r){1-1} \cmidrule{2-7}Signature · 7 lines
2.7.4 -- To unsubscribe from this list: send the line "unsubscribe perfbook" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html