blk-mq/nvme-tcp: fix timed out related races
Subsystems (2)
v2 cover blk-mq/nvme-tcp: fix timed out related races
Hi,
The 1st 2 patches fixes request completion related races.
The 2nd 3 patches fixes/improves nvme-tcp error recovery.
With the 4 patches, nvme/012 can pass on nvme-tcp in Zhang Yi's test machine.
V2:
- re-order patch3 and patch4
- fix comment
- improve patch "nvme: tcp: fix race between timeout and normal completion"
Ming Lei (4):
blk-mq: check rq->state explicitly in
blk_mq_tagset_count_completed_rqs
blk-mq: fix blk_mq_request_completed
nvme: tcp: complete non-IO requests atomically
nvme: tcp: fix race between timeout and normal completion
block/blk-flush.c | 2 + block/blk-mq-tag.c | 2 +- drivers/nvme/host/tcp.c | 98 ++++++++++++++++++++++++++++++++--------- include/linux/blk-mq.h | 8 +++- 4 files changed, 86 insertions(+), 24 deletions(-)
Signature · 1 line
2.25.2
PATCH v2 1/4 blk-mq: check rq->state explicitly in blk_mq_tagset_count_completed_rqs
blk_mq_tagset_count_completed_rqs() is called from blk_mq_tagset_wait_completed_request() for draining requests being completed remotely. What we need to do is to make sure that request->state is switched to non-MQ_RQ_COMPLETE.
So check MQ_RQ_COMPLETE explicitly in blk_mq_tagset_count_completed_rqs().
Meantime mark flush request as IDLE in its .end_io() for aligning to end normal request because flush request may stay in inflight tags in case of !elevator, so we need to change its state into IDLE.
--- block/blk-flush.c | 2 ++ block/blk-mq-tag.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-)
block/blk-flush.c +2 -0
@@ -231,6 +231,8 @@ static void flush_end_io(struct request *flush_rq, blk_status_t error)return ; } +WRITE_ONCE (flush_rq->state,MQ_RQ_IDLE ); +if (fq->rq_status !=BLK_STS_OK ) error = fq->rq_status;
block/blk-mq-tag.c +1 -1
@@ -367,7 +367,7 @@ static bool blk_mq_tagset_count_completed_rqs(struct request *rq, {unsigned *count = data; -if (blk_mq_request_completed (rq)) +if (blk_mq_rq_state (rq) ==MQ_RQ_COMPLETE ) (*count)++;return true; }
Signature · 1 line
2.25.2
PATCH v2 2/4 blk-mq: fix blk_mq_request_completed
In reply to Ming LeiMQ_RQ_COMPLETE is one transient state, because the .complete callback ends or requeues this request, then the request state is updated to IDLE from the .complete callback.
blk_mq_request_completed() is often used by driver for avoiding double completion with help of driver's specific sync approach. Such as, NVMe TCP calls blk_mq_request_completed() in its timeout handler and abort handler for avoiding double completion. If request's state is updated to IDLE in either one, another code path may think this request as not completed, and will complete it one more time. Then double completion is triggered.
Yi reported[1] that 'refcount_t: underflow; use-after-free' of rq->ref is triggered in blktests(nvme/012) on one very slow machine.
Fixes this issue by thinking request as completed if its state becomes not IN_FLIGHT.
--- include/linux/blk-mq.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
include/linux/blk-mq.h +7 -1
@@ -478,9 +478,15 @@ static inline int blk_mq_request_started(struct request *rq)return blk_mq_rq_state (rq) !=MQ_RQ_IDLE ; } +/* +* It is often called in abort handler for avoiding double completion, +* MQ_RQ_COMPLETE is one transient state because .complete callback +* may end or requeue this request, in either way the request is marked +* as IDLE. So return true if this request's state become not IN_FLIGHT. +*/ static inline int blk_mq_request_completed (struct request *rq) { -return blk_mq_rq_state (rq) ==MQ_RQ_COMPLETE ; +return blk_mq_rq_state (rq) !=MQ_RQ_IN_FLIGHT ; }void blk_mq_start_request (struct request *rq);
Signature · 1 line
2.25.2
PATCH v2 3/4 nvme: tcp: complete non-IO requests atomically
In reply to Ming LeiDuring controller's CONNECTING state, admin/fabric/connect requests are submitted for recovery controller, and we allow to abort this request directly in time out handler for not blocking setup procedure.
So timout vs. normal completion race exists on these requests since admin/fabirc/connect queues won't be shutdown before handling timeout during CONNECTING state.
Add atomic completion for requests from connect/fabric/admin queue for avoiding the race.
--- drivers/nvme/host/tcp.c | 40 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 37 insertions(+), 3 deletions(-)
drivers/nvme/host/tcp.c +37 -3
@@ -30,6 +30,8 @@ static int so_priority;module_param (so_priority, int,0644 );MODULE_PARM_DESC (so_priority,"nvme tcp socket optimize priority" ); +#define REQ_STATE_COMPLETE 0 +enum nvme_tcp_send_state {NVME_TCP_SEND_CMD_PDU =0 ,NVME_TCP_SEND_H2C_PDU ,
@@ -56,6 +58,8 @@ struct nvme_tcp_request {size_t offset;size_t data_sent;enum nvme_tcp_send_state state; + +unsigned long comp_state; };enum nvme_tcp_queue_flags {
@@ -469,6 +473,33 @@ static void nvme_tcp_error_recovery(struct nvme_ctrl *ctrl)queue_work (nvme_reset_wq, &to_tcp_ctrl (ctrl)->err_work); } +/* +* requests originated from admin, fabrics and connect_q have to be +* completed atomically because we don't cover the race between timeout +* and normal completion for these queues. +*/ +static inline bool nvme_tcp_need_atomic_complete (struct request *rq) +{ +return !rq->rq_disk; +} + +static inline void nvme_tcp_clear_rq_complete (struct request *rq) +{ +struct nvme_tcp_request *req =blk_mq_rq_to_pdu (rq); + +if (unlikely (nvme_tcp_need_atomic_complete (rq))) +clear_bit (REQ_STATE_COMPLETE , &req->comp_state); +} + +static inline bool nvme_tcp_mark_rq_complete (struct request *rq) +{ +struct nvme_tcp_request *req =blk_mq_rq_to_pdu (rq); + +if (unlikely (nvme_tcp_need_atomic_complete (rq))) +return !test_and_set_bit (REQ_STATE_COMPLETE , &req->comp_state); +return true; +} +static int nvme_tcp_process_nvme_cqe (struct nvme_tcp_queue *queue,struct nvme_completion *cqe) {
@@ -483,7 +514,8 @@ static int nvme_tcp_process_nvme_cqe(struct nvme_tcp_queue *queue,return -EINVAL ; } -if (!nvme_try_complete_req (rq, cqe->status, cqe->result)) +if (nvme_tcp_mark_rq_complete (rq) && + !nvme_try_complete_req (rq, cqe->status, cqe->result))nvme_complete_rq (rq); queue->nr_cqe++;
@@ -674,7 +706,8 @@ static inline void nvme_tcp_end_request(struct request *rq, u16 status) {union nvme_result res = {}; -if (!nvme_try_complete_req (rq,cpu_to_le16 (status <<1 ), res)) +if (nvme_tcp_mark_rq_complete (rq) && + !nvme_try_complete_req (rq,cpu_to_le16 (status <<1 ), res))nvme_complete_rq (rq); }
@@ -2174,7 +2207,7 @@ static void nvme_tcp_complete_timed_out(struct request *rq)/* fence other contexts that may complete the command */ mutex_lock (&to_tcp_ctrl (ctrl)->teardown_lock);nvme_tcp_stop_queue (ctrl,nvme_tcp_queue_id (req->queue)); -if (!blk_mq_request_completed (rq)) { +if (nvme_tcp_mark_rq_complete (rq) && !blk_mq_request_completed (rq)) {nvme_req (rq)->status =NVME_SC_HOST_ABORTED_CMD ;blk_mq_complete_request (rq); }
@@ -2315,6 +2348,7 @@ static blk_status_t nvme_tcp_queue_rq(struct blk_mq_hw_ctx *hctx,if (unlikely (ret))return ret; +nvme_tcp_clear_rq_complete (rq);blk_mq_start_request (rq);nvme_tcp_queue_request (req, true, bd->last);
Signature · 1 line
2.25.2
Re: [PATCH V2 3/4] nvme: tcp: complete non-IO requests atomically
Quoted 34 lines · Ming Lei
During controller's CONNECTING state, admin/fabric/connect requests are submitted for recovery controller, and we allow to abort this request directly in time out handler for not blocking setup procedure.
So timout vs. normal completion race exists on these requests since admin/fabirc/connect queues won't be shutdown before handling timeout during CONNECTING state.
Add atomic completion for requests from connect/fabric/admin queue for avoiding the race.
CC Chao Leng <[email protected]>Cc Sagi Grimberg <[email protected]>Reported-by Yi Zhang <[email protected]>Tested-by Yi Zhang <[email protected]>Signed-off-by Ming Lei <[email protected]>--- drivers/nvme/host/tcp.c | 40 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 37 insertions(+), 3 deletions(-)drivers/nvme/host/tcp.c +2
-0@@ -30,6 +30,8 @@ static int so_priority;module_param (so_priority, int,0644 );MODULE_PARM_DESC (so_priority,"nvme tcp socket optimize priority" ); +#define REQ_STATE_COMPLETE 0 +enum nvme_tcp_send_state {NVME_TCP_SEND_CMD_PDU =0 ,NVME_TCP_SEND_H2C_PDU ,
drivers/nvme/host/tcp.c struct nvme_tcp_request { · line 62
Quoted 5 lines
drivers/nvme/host/tcp.c +2
-0@@ -56,6 +58,8 @@ struct nvme_tcp_request {size_t offset;size_t data_sent;enum nvme_tcp_send_state state; + +unsigned long comp_state;
I do not think adding state is a good idea.
It is similar to rq->state.
In the teardown process, after quiesced queues delete the timer and cancel the timeout work maybe a better option.
I will send the patch later.
The patch is already tested with roce more than one week.
Quoted 75 lines
drivers/nvme/host/tcp.c +33
-3};enum nvme_tcp_queue_flags {@@ -469,6 +473,33 @@ static void nvme_tcp_error_recovery(struct nvme_ctrl *ctrl)queue_work (nvme_reset_wq, &to_tcp_ctrl (ctrl)->err_work); } +/* +* requests originated from admin, fabrics and connect_q have to be +* completed atomically because we don't cover the race between timeout +* and normal completion for these queues. +*/ +static inline bool nvme_tcp_need_atomic_complete (struct request *rq) +{ +return !rq->rq_disk; +} + +static inline void nvme_tcp_clear_rq_complete (struct request *rq) +{ +struct nvme_tcp_request *req =blk_mq_rq_to_pdu (rq); + +if (unlikely (nvme_tcp_need_atomic_complete (rq))) +clear_bit (REQ_STATE_COMPLETE , &req->comp_state); +} + +static inline bool nvme_tcp_mark_rq_complete (struct request *rq) +{ +struct nvme_tcp_request *req =blk_mq_rq_to_pdu (rq); + +if (unlikely (nvme_tcp_need_atomic_complete (rq))) +return !test_and_set_bit (REQ_STATE_COMPLETE , &req->comp_state); +return true; +} +static int nvme_tcp_process_nvme_cqe (struct nvme_tcp_queue *queue,struct nvme_completion *cqe) {@@ -483,7 +514,8 @@ static int nvme_tcp_process_nvme_cqe(struct nvme_tcp_queue *queue,return -EINVAL ; } -if (!nvme_try_complete_req (rq, cqe->status, cqe->result)) +if (nvme_tcp_mark_rq_complete (rq) && + !nvme_try_complete_req (rq, cqe->status, cqe->result))nvme_complete_rq (rq); queue->nr_cqe++;@@ -674,7 +706,8 @@ static inline void nvme_tcp_end_request(struct request *rq, u16 status) {union nvme_result res = {}; -if (!nvme_try_complete_req (rq,cpu_to_le16 (status <<1 ), res)) +if (nvme_tcp_mark_rq_complete (rq) && + !nvme_try_complete_req (rq,cpu_to_le16 (status <<1 ), res))nvme_complete_rq (rq); }@@ -2174,7 +2207,7 @@ static void nvme_tcp_complete_timed_out(struct request *rq)/* fence other contexts that may complete the command */ mutex_lock (&to_tcp_ctrl (ctrl)->teardown_lock);nvme_tcp_stop_queue (ctrl,nvme_tcp_queue_id (req->queue)); -if (!blk_mq_request_completed (rq)) { +if (nvme_tcp_mark_rq_complete (rq) && !blk_mq_request_completed (rq)) {nvme_req (rq)->status =NVME_SC_HOST_ABORTED_CMD ;blk_mq_complete_request (rq); }@@ -2315,6 +2348,7 @@ static blk_status_t nvme_tcp_queue_rq(struct blk_mq_hw_ctx *hctx,if (unlikely (ret))return ret; +nvme_tcp_clear_rq_complete (rq);blk_mq_start_request (rq);nvme_tcp_queue_request (req, true, bd->last);
Re: [PATCH V2 3/4] nvme: tcp: complete non-IO requests atomically
Quoted 39 lines · Chao Leng
Quoted 36 lines · Ming Lei
During controller's CONNECTING state, admin/fabric/connect requests are submitted for recovery controller, and we allow to abort this request directly in time out handler for not blocking setup procedure.
So timout vs. normal completion race exists on these requests since admin/fabirc/connect queues won't be shutdown before handling timeout during CONNECTING state.
Add atomic completion for requests from connect/fabric/admin queue for avoiding the race.
CC Chao Leng <[email protected]>Cc Sagi Grimberg <[email protected]>Reported-by Yi Zhang <[email protected]>Tested-by Yi Zhang <[email protected]>Signed-off-by Ming Lei <[email protected]>--- drivers/nvme/host/tcp.c | 40 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 37 insertions(+), 3 deletions(-)drivers/nvme/host/tcp.c +2
-0@@ -30,6 +30,8 @@ static int so_priority;module_param (so_priority, int,0644 );MODULE_PARM_DESC (so_priority,"nvme tcp socket optimize priority" ); +#define REQ_STATE_COMPLETE 0 +enum nvme_tcp_send_state {NVME_TCP_SEND_CMD_PDU =0 ,NVME_TCP_SEND_H2C_PDU ,@@ -56,6 +58,8 @@ struct nvme_tcp_request {size_t offset;size_t data_sent;enum nvme_tcp_send_state state;
Quoted 8 lines
drivers/nvme/host/tcp.c struct nvme_tcp_request { · line 62
Quoted 2 lines
drivers/nvme/host/tcp.c +2
-0+ +unsigned long comp_state;I do not think adding state is a good idea.
It is similar torq->state.
In the teardown process, after quiesced queues delete the timer and cancel the timeout work maybe a better option.
I will send the patch later.
The patch is already tested with roce more than one week.
Actually there isn't race between timeout and teardown, and patch 1 and patch 2 are enough to fix the issue reported by Yi.
It is just that rq->state is updated to IDLE in its. complete(), so either one of code paths may think that this rq isn't completed, and patch 2 has addressed this issue.
In short, teardown lock is enough to cover the race.
Thanks,
Ming
Re: [PATCH V2 3/4] nvme: tcp: complete non-IO requests atomically
Quoted 49 lines · Ming Lei
Quoted 39 lines · Chao Leng
Quoted 36 lines · Ming Lei
During controller's CONNECTING state, admin/fabric/connect requests are submitted for recovery controller, and we allow to abort this request directly in time out handler for not blocking setup procedure.
So timout vs. normal completion race exists on these requests since admin/fabirc/connect queues won't be shutdown before handling timeout during CONNECTING state.
Add atomic completion for requests from connect/fabric/admin queue for avoiding the race.
CC Chao Leng <[email protected]>Cc Sagi Grimberg <[email protected]>Reported-by Yi Zhang <[email protected]>Tested-by Yi Zhang <[email protected]>Signed-off-by Ming Lei <[email protected]>--- drivers/nvme/host/tcp.c | 40 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 37 insertions(+), 3 deletions(-)drivers/nvme/host/tcp.c +2
-0@@ -30,6 +30,8 @@ static int so_priority;module_param (so_priority, int,0644 );MODULE_PARM_DESC (so_priority,"nvme tcp socket optimize priority" ); +#define REQ_STATE_COMPLETE 0 +enum nvme_tcp_send_state {NVME_TCP_SEND_CMD_PDU =0 ,NVME_TCP_SEND_H2C_PDU ,@@ -56,6 +58,8 @@ struct nvme_tcp_request {size_t offset;size_t data_sent;enum nvme_tcp_send_state state;Quoted 8 lines
drivers/nvme/host/tcp.c struct nvme_tcp_request { · line 62
Quoted 2 lines
drivers/nvme/host/tcp.c +2
-0+ +unsigned long comp_state;I do not think adding state is a good idea.
It is similar torq->state.
In the teardown process, after quiesced queues delete the timer and cancel the timeout work maybe a better option.
I will send the patch later.
The patch is already tested with roce more than one week.
Quoted 8 lines
Actually there isn't race between timeout and teardown, and patch 1 and patch 2 are enough to fix the issue reported by Yi.
It is just that
rq->stateis updated to IDLE in its.complete(), so either one of code paths may think that this rq isn't completed, and patch 2 has addressed this issue.In short, teardown lock is enough to cover the race.
The race may cause abnormals:
1. Reported by Yi Zhang <[email protected]>
detail: https://lore.kernel.org/linux-nvme/[email protected]/
2. BUG_ON in blk_mq_requeue_request
Because error recovery and time out may repeated completion request.
First error recovery cancel request in tear down process, the request
will be retried in completion, rq->state will be changed to IDEL.
And then time out will complete the request again, and samely retry
the request, BUG_ON will happen in blk_mq_requeue_request.
3. abnormal link disconnection
Firt error recovery cancel all request, reconnect success, the request
will be restarted. And then time out will complete the request again,
the queue will be stoped in nvme_rdma(tcp)_complete_timed_out,
Abnormal link diconnection will happen. The condition(time out process
is delayed long time by some reason such as hardware interrupt) is need.
So the probability is low.
teardown_lock just serialize the race. and add checkint the rq->state can avoid the 1 and 2 scenario, but 3 scenario can not be fixed.
Quoted 7 lines
Thanks,
Ming.
Re: [PATCH V2 3/4] nvme: tcp: complete non-IO requests atomically
Quoted 59 lines · Chao Leng
Quoted 56 lines · Ming Lei
Quoted 39 lines · Chao Leng
Quoted 36 lines · Ming Lei
During controller's CONNECTING state, admin/fabric/connect requests are submitted for recovery controller, and we allow to abort this request directly in time out handler for not blocking setup procedure.
So timout vs. normal completion race exists on these requests since admin/fabirc/connect queues won't be shutdown before handling timeout during CONNECTING state.
Add atomic completion for requests from connect/fabric/admin queue for avoiding the race.
CC Chao Leng <[email protected]>Cc Sagi Grimberg <[email protected]>Reported-by Yi Zhang <[email protected]>Tested-by Yi Zhang <[email protected]>Signed-off-by Ming Lei <[email protected]>--- drivers/nvme/host/tcp.c | 40 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 37 insertions(+), 3 deletions(-)drivers/nvme/host/tcp.c +2
-0@@ -30,6 +30,8 @@ static int so_priority;module_param (so_priority, int,0644 );MODULE_PARM_DESC (so_priority,"nvme tcp socket optimize priority" ); +#define REQ_STATE_COMPLETE 0 +enum nvme_tcp_send_state {NVME_TCP_SEND_CMD_PDU =0 ,NVME_TCP_SEND_H2C_PDU ,@@ -56,6 +58,8 @@ struct nvme_tcp_request {size_t offset;size_t data_sent;enum nvme_tcp_send_state state;Quoted 8 lines
drivers/nvme/host/tcp.c struct nvme_tcp_request { · line 62
Quoted 2 lines
drivers/nvme/host/tcp.c +2
-0+ +unsigned long comp_state;I do not think adding state is a good idea.
It is similar torq->state.
In the teardown process, after quiesced queues delete the timer and cancel the timeout work maybe a better option.
I will send the patch later.
The patch is already tested with roce more than one week.Actually there isn't race between timeout and teardown, and patch 1 and patch 2 are enough to fix the issue reported by Yi.
It is just that
rq->stateis updated to IDLE in its.complete(), so either one of code paths may think that this rq isn't completed, and patch 2 has addressed this issue.
Quoted 8 lines
Quoted 1 line
In short, teardown lock is enough to cover the race.
The race may cause abnormals:
1. Reported by Yi Zhang <[email protected]>
detail: https://lore.kernel.org/linux-nvme/[email protected]/
2.BUG_ONinblk_mq_requeue_request
Because error recovery and time out may repeated completion request.
First error recovery cancel request in tear down process, the request
will be retried in completion,rq->statewill be changed to IDEL.
Right.
Quoted 2 lines
And then time out will complete the request again, and samely retry the request,
BUG_ONwill happen inblk_mq_requeue_request.
With patch2 in this patchset, timeout handler won't complete the request any more.
Quoted 7 lines
3. abnormal link disconnection
Firt error recovery cancel all request, reconnect success, the request will be restarted. And then time out will complete the request again, the queue will be stoped in nvme_rdma(tcp)_complete_timed_out, Abnormal link diconnection will happen. The condition(time out process is delayed long time by some reason such as hardware interrupt) is need. So the probability is low.
OK, the timeout handler may just get chance to run after recovery is done, and it can be fixed by calling nvme_sync_queues() after updating to CONNECTING or before updating to LIVE together with patch 1 & 2.
Quoted 2 lines
teardown_lockjust serialize the race. and add checkint therq->statecan avoid the 1 and 2 scenario, but 3 scenario can not be fixed.
I didn't think of scenario 3, which seems not triggered in Yi's test.
thanks,
Ming
Re: [PATCH V2 3/4] nvme: tcp: complete non-IO requests atomically
Quoted 85 lines · Ming Lei
Quoted 59 lines · Chao Leng
Quoted 56 lines · Ming Lei
Quoted 39 lines · Chao Leng
Quoted 36 lines · Ming Lei
During controller's CONNECTING state, admin/fabric/connect requests are submitted for recovery controller, and we allow to abort this request directly in time out handler for not blocking setup procedure.
So timout vs. normal completion race exists on these requests since admin/fabirc/connect queues won't be shutdown before handling timeout during CONNECTING state.
Add atomic completion for requests from connect/fabric/admin queue for avoiding the race.
CC Chao Leng <[email protected]>Cc Sagi Grimberg <[email protected]>Reported-by Yi Zhang <[email protected]>Tested-by Yi Zhang <[email protected]>Signed-off-by Ming Lei <[email protected]>--- drivers/nvme/host/tcp.c | 40 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 37 insertions(+), 3 deletions(-)drivers/nvme/host/tcp.c +2
-0@@ -30,6 +30,8 @@ static int so_priority;module_param (so_priority, int,0644 );MODULE_PARM_DESC (so_priority,"nvme tcp socket optimize priority" ); +#define REQ_STATE_COMPLETE 0 +enum nvme_tcp_send_state {NVME_TCP_SEND_CMD_PDU =0 ,NVME_TCP_SEND_H2C_PDU ,@@ -56,6 +58,8 @@ struct nvme_tcp_request {size_t offset;size_t data_sent;enum nvme_tcp_send_state state;Quoted 8 lines
drivers/nvme/host/tcp.c struct nvme_tcp_request { · line 62
Quoted 2 lines
drivers/nvme/host/tcp.c +2
-0+ +unsigned long comp_state;I do not think adding state is a good idea.
It is similar torq->state.
In the teardown process, after quiesced queues delete the timer and cancel the timeout work maybe a better option.
I will send the patch later.
The patch is already tested with roce more than one week.Actually there isn't race between timeout and teardown, and patch 1 and patch 2 are enough to fix the issue reported by Yi.
It is just that
rq->stateis updated to IDLE in its.complete(), so either one of code paths may think that this rq isn't completed, and patch 2 has addressed this issue.Quoted 8 lines
Quoted 1 line
In short, teardown lock is enough to cover the race.
The race may cause abnormals:
1. Reported by Yi Zhang <[email protected]>
detail: https://lore.kernel.org/linux-nvme/[email protected]/
2.BUG_ONinblk_mq_requeue_request
Because error recovery and time out may repeated completion request.
First error recovery cancel request in tear down process, the request
will be retried in completion,rq->statewill be changed to IDEL.Right.
Quoted 2 lines
And then time out will complete the request again, and samely retry the request,
BUG_ONwill happen inblk_mq_requeue_request.With patch2 in this patchset, timeout handler won't complete the request any more.
Quoted 7 lines
3. abnormal link disconnection
Firt error recovery cancel all request, reconnect success, the request will be restarted. And then time out will complete the request again, the queue will be stoped in nvme_rdma(tcp)_complete_timed_out, Abnormal link diconnection will happen. The condition(time out process is delayed long time by some reason such as hardware interrupt) is need. So the probability is low.
Quoted 8 lines
OK, the timeout handler may just get chance to run after recovery is done, and it can be fixed by calling
nvme_sync_queues()after updating to CONNECTING or before updating to LIVE together with patch 1 & 2.Quoted 2 lines
teardown_lockjust serialize the race. and add checkint therq->statecan avoid the 1 and 2 scenario, but 3 scenario can not be fixed.I didn't think of scenario 3, which seems not triggered in Yi's test.
The scenario 3 is unlikely triggered in normal test.
The trigger condition are harsh. It'll only happen in some extreme situations. If without scenario 3, Sagi's patch can work well.
Quoted 7 lines
thanks,
Ming.
PATCH v2 4/4 nvme: tcp: fix race between timeout and normal completion
In reply to Ming LeiNVMe TCP timeout handler allows to abort request directly when the controller isn't in LIVE state. nvme_tcp_error_recovery() updates controller state as RESETTING, and schedule reset work function. If new timeout comes before the work function is called, the new timedout request will be aborted directly, however at that time, the controller isn't shut down yet, then timeout abort vs. normal completion race will be triggered.
Fix the race by the following approach:
1) delay unquiesce io queues and admin queue until controller is LIVE because it isn't necessary to start queues during RESETTING. Instead, this way may risk timeout vs. normal completion race because we need to abort timed-out request directly during CONNECTING state for setting up controller.
2) aborting timed out request directly only in case that controller is in CONNECTING and DELETING state. In CONNECTING state, requests are only submitted for recovering controller, and normal IO requests aren't allowed, so it is safe to do so. In DELETING state, teardown controller if IO request timeout happens.
--- drivers/nvme/host/tcp.c | 58 +++++++++++++++++++++++++++-------------- 1 file changed, 39 insertions(+), 19 deletions(-)
drivers/nvme/host/tcp.c +39 -19
@@ -1919,7 +1919,6 @@ static int nvme_tcp_configure_admin_queue(struct nvme_ctrl *ctrl, bool new)static void nvme_tcp_teardown_admin_queue (struct nvme_ctrl *ctrl,bool remove) { -mutex_lock (&to_tcp_ctrl (ctrl)->teardown_lock);blk_mq_quiesce_queue (ctrl->admin_q);nvme_tcp_stop_queue (ctrl,0 );if (ctrl->admin_tagset) {
@@ -1930,15 +1929,13 @@ static void nvme_tcp_teardown_admin_queue(struct nvme_ctrl *ctrl,if (remove)blk_mq_unquiesce_queue (ctrl->admin_q);nvme_tcp_destroy_admin_queue (ctrl, remove); -mutex_unlock (&to_tcp_ctrl (ctrl)->teardown_lock); }static void nvme_tcp_teardown_io_queues (struct nvme_ctrl *ctrl,bool remove) { -mutex_lock (&to_tcp_ctrl (ctrl)->teardown_lock);if (ctrl->queue_count <=1 ) - goto out; +return ;blk_mq_quiesce_queue (ctrl->admin_q);nvme_start_freeze (ctrl);nvme_stop_queues (ctrl);
@@ -1951,8 +1948,6 @@ static void nvme_tcp_teardown_io_queues(struct nvme_ctrl *ctrl,if (remove)nvme_start_queues (ctrl);nvme_tcp_destroy_io_queues (ctrl, remove); -out: -mutex_unlock (&to_tcp_ctrl (ctrl)->teardown_lock); }static void nvme_tcp_reconnect_or_remove (struct nvme_ctrl *ctrl)
@@ -1971,6 +1966,10 @@ static void nvme_tcp_reconnect_or_remove(struct nvme_ctrl *ctrl) ctrl->opts->reconnect_delay * HZ); }else {dev_info (ctrl->device,"Removing controller...\n" ); + +/* start queues for not blocking removing path */ +nvme_start_queues (ctrl); +blk_mq_unquiesce_queue (ctrl->admin_q);nvme_delete_ctrl (ctrl); } }
@@ -2063,11 +2062,11 @@ static void nvme_tcp_error_recovery_work(struct work_struct *work)struct nvme_ctrl *ctrl = &tcp_ctrl->ctrl;nvme_stop_keep_alive (ctrl); + +mutex_lock (&tcp_ctrl->teardown_lock);nvme_tcp_teardown_io_queues (ctrl, false); -/* unquiesce to fail fast pending requests */ -nvme_start_queues (ctrl);nvme_tcp_teardown_admin_queue (ctrl, false); -blk_mq_unquiesce_queue (ctrl->admin_q); +mutex_unlock (&tcp_ctrl->teardown_lock);if (!nvme_change_ctrl_state (ctrl,NVME_CTRL_CONNECTING )) {/* state change failure is ok if we started ctrl delete */
@@ -2084,6 +2083,7 @@ static void nvme_tcp_teardown_ctrl(struct nvme_ctrl *ctrl, bool shutdown)cancel_work_sync (&to_tcp_ctrl (ctrl)->err_work);cancel_delayed_work_sync (&to_tcp_ctrl (ctrl)->connect_work); +mutex_lock (&to_tcp_ctrl (ctrl)->teardown_lock);nvme_tcp_teardown_io_queues (ctrl, shutdown);blk_mq_quiesce_queue (ctrl->admin_q);if (shutdown)
@@ -2091,6 +2091,7 @@ static void nvme_tcp_teardown_ctrl(struct nvme_ctrl *ctrl, bool shutdown)else nvme_disable_ctrl (ctrl);nvme_tcp_teardown_admin_queue (ctrl, shutdown); +mutex_unlock (&to_tcp_ctrl (ctrl)->teardown_lock); }static void nvme_tcp_delete_ctrl (struct nvme_ctrl *ctrl)
@@ -2225,22 +2226,41 @@ nvme_tcp_timeout(struct request *rq, bool reserved)"queue %d: timeout request %#x type %d\n" , nvme_tcp_queue_id(req->queue), rq->tag, pdu->hdr.type); -if (ctrl->state !=NVME_CTRL_LIVE ) { +/* +* During CONNECTING or DELETING, the controller has been shutdown, +* so it is safe to abort the request directly, otherwise timeout +* vs. normal completion will be triggered. +*/ +if (ctrl->state ==NVME_CTRL_CONNECTING || + ctrl->state ==NVME_CTRL_DELETING || + ctrl->state ==NVME_CTRL_DELETING_NOIO ) {/* -* If we are resetting, connecting or deleting we should -* complete immediately because we may block controller -* teardown or setup sequence +* If we are connecting we should complete immediately because +* we may block controller setup sequence * - ctrl disable/shutdown fabrics requests * - connect requests * - initialization admin requests -* - I/O requests that entered after unquiescing and -* the controller stopped responding +*/ +if (!rq->rq_disk) { +nvme_tcp_complete_timed_out (rq); +return BLK_EH_DONE ; + } + +/* +* During CONNECTING, any in-flight requests are aborted, and +* queue is stopped, so in theory not possible to see timed out +* requests. And it might happen when one IO timeout is triggered +* before changing to CONNECTING, but the timeout handling is +* scheduled after updating to CONNECTING, so safe to ignore +* this case. * -* All other requests should be cancelled by the error -* recovery work, so it's fine that we fail it here. +* During DELETING, tear down controller and make forward +* progress. */ -nvme_tcp_complete_timed_out (rq); -return BLK_EH_DONE ; +if (ctrl->state !=NVME_CTRL_CONNECTING ) { +nvme_tcp_teardown_ctrl (ctrl, false); +return BLK_EH_DONE ; + } }/*
Signature · 1 line
2.25.2