Skip to contentSkip to conversation

linux/linux.mk: Use '-isystem' instead of '-I' in HOST_CFLAGS

PATCH New David De Grave (Essensium/Mind) 3 participants 4 messages Aug 30, 2018 – Sep 3, 2018

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 linux/linux.mk: Use '-isystem' instead of '-I' in HOST_CFLAGS

Since the last update of the DTC package, linux build breaks at some point with the following error:

    In file included from {output}/host/include/libfdt.h:54:0,
                     from scripts/dtc/libfdt/fdt.c:54:
    {output}/host/include/libfdt_env.h:82:24: error: redefinition of \
    ?fdt16_to_cpu?
     static inline uint16_t fdt16_to_cpu(fdt16_t x)
                            ^~~~~~~~~~~~
    In file included from scripts/dtc/libfdt/fdt.c:51:0:
    scripts/dtc/libfdt/libfdt_env.h:81:24: note: previous definition of \
    ?fdt16_to_cpu? was here

This is because the HOST_CFLAGS is added before Linux's makefile add it's own local ones (-Iscripts/dtc/libfdt), resulting in a mix of local and host headers beeing used.

So, to fix this the '-I' is substituted by '-isystem' to let it search for the headers in the right location first.

---
 linux/linux.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
linux/linux.mk +1 -1
index 675e7906a8..a31617ca22 100644
@@ -115,7 +115,7 @@ LINUX_EXTRA_DOWNLOADS += $(ARCH_XTENSA_OVERLAY_URL)
 endif
 
 LINUX_MAKE_FLAGS = \
-	HOSTCC="$(HOSTCC) $(HOST_CFLAGS) $(HOST_LDFLAGS)" \
+	HOSTCC="$(HOSTCC) $(patsubst -I%,-isystem %,$(HOST_CFLAGS)) $(HOST_LDFLAGS)" \
 	ARCH=$(KERNEL_ARCH) \
 	INSTALL_MOD_PATH=$(TARGET_DIR) \
 	CROSS_COMPILE="$(TARGET_CROSS)" \
Signature · 1 line
2.13.6
#1 lore raw

PATCH 1/1 linux/linux.mk: Use '-isystem' instead of '-I' in HOST_CFLAGS

Hello,

Quoted 17 lines · David De Grave (Essensium/Mind)

Since the last update of the DTC package, linux build breaks at some point with the following error:

    In file included from {output}/host/include/libfdt.h:54:0,
                     from scripts/dtc/libfdt/fdt.c:54:
    {output}/host/include/libfdt_env.h:82:24: error: redefinition of \
    ?fdt16_to_cpu?
     static inline uint16_t fdt16_to_cpu(fdt16_t x)
                            ^~~~~~~~~~~~
    In file included from scripts/dtc/libfdt/fdt.c:51:0:
    scripts/dtc/libfdt/libfdt_env.h:81:24: note: previous definition of \
    ?fdt16_to_cpu? was here

This is because the HOST_CFLAGS is added before Linux's makefile add it's own local ones (-Iscripts/dtc/libfdt), resulting in a mix of local and host headers beeing used.

Quoted 7 lines

So, to fix this the '-I' is substituted by '-isystem' to let it search for the headers in the right location first.

---
 linux/linux.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

I suspect this one is superseded by your new patch series
http://patchwork.ozlabs.org/project/buildroot/list/?series=63524, so I've marked this patch as Changes Requested.

Note that
http://patchwork.ozlabs.org/project/buildroot/list/?series=63524
doesn't contain PATCH 2/3 due to a patchwork issue when associating patches to series, but PATCH 2/3 has been recorded by patchwork.

Best regards,

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
#2 lore raw

PATCH 1/1 linux/linux.mk: Use '-isystem' instead of '-I' in HOST_CFLAGS

Hi Thomas,

Indeed the series can replace that one... Thanks.

Regards,
David.

Quoted 50 lines · Thomas Petazzoni

Hello,

Quoted 1 line · David De Grave (Essensium/Mind)

Since the last update of the DTC package, linux build breaks at some

point

Quoted 10 lines

with the following error:

    In file included from {output}/host/include/libfdt.h:54:0,
                     from scripts/dtc/libfdt/fdt.c:54:
    {output}/host/include/libfdt_env.h:82:24: error: redefinition of \
    ?fdt16_to_cpu?
     static inline uint16_t fdt16_to_cpu(fdt16_t x)
                            ^~~~~~~~~~~~
    In file included from scripts/dtc/libfdt/fdt.c:51:0:
    scripts/dtc/libfdt/libfdt_env.h:81:24: note: previous definition of

\

Quoted 4 lines
    ?fdt16_to_cpu? was here

This is because the HOST_CFLAGS is added before Linux's makefile add it's own local ones (-Iscripts/dtc/libfdt), resulting in a mix of local and

host

Quoted 3 lines

headers beeing used.

So, to fix this the '-I' is substituted by '-isystem' to let it search

for

Quoted 6 lines

the headers in the right location first.

---
 linux/linux.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

I suspect this one is superseded by your new patch series
http://patchwork.ozlabs.org/project/buildroot/list/?series=63524, so I've marked this patch as Changes Requested.

Note that
http://patchwork.ozlabs.org/project/buildroot/list/?series=63524
doesn't contain PATCH 2/3 due to a patchwork issue when associating patches to series, but PATCH 2/3 has been recorded by patchwork.

Best regards,

Thomas
--
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering
https://bootlin.com

Signature · 8 lines
*David De Grave*
Senior Embedded Software Developer
Gsm : +32(0)496.364.960 | Tel : +32-16-28.65.00 | Fax : +32-16-28a.65.01
Essensium-Mind <https://www.mind.be/> - Gaston Geenslaan 9, B-3001 Leuven,
Belgium
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20180901/0006c9ec/attachment.html>
#3 lore raw

PATCH 1/1 linux/linux.mk: Use '-isystem' instead of '-I' in HOST_CFLAGS

In reply to Thomas Petazzoni
Quoted 24 lines · Thomas Petazzoni

Hello,

Quoted 20 lines · David De Grave (Essensium/Mind)

Since the last update of the DTC package, linux build breaks at some point with the following error:

    In file included from {output}/host/include/libfdt.h:54:0,
                     from scripts/dtc/libfdt/fdt.c:54:
    {output}/host/include/libfdt_env.h:82:24: error: redefinition of \
    ?fdt16_to_cpu?
     static inline uint16_t fdt16_to_cpu(fdt16_t x)
                            ^~~~~~~~~~~~
    In file included from scripts/dtc/libfdt/fdt.c:51:0:
    scripts/dtc/libfdt/libfdt_env.h:81:24: note: previous definition of \
    ?fdt16_to_cpu? was here

This is because the HOST_CFLAGS is added before Linux's makefile add it's own local ones (-Iscripts/dtc/libfdt), resulting in a mix of local and host headers beeing used.

So, to fix this the '-I' is substituted by '-isystem' to let it search for the headers in the right location first.

Quoted 8 lines
Quoted 4 lines
---
 linux/linux.mk | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

I suspect this one is superseded by your new patch series
http://patchwork.ozlabs.org/project/buildroot/list/?series=63524, so I've marked this patch as Changes Requested.

Actually, the idea was to apply this patch on master because it fixes a bug,
and the series on next because it is more invasive.

It turns out, however, that the problem only occurs for the beaglebone kernel
on github, because that one builds its fdtoverlay host tool. "Normal" kernels don't build libfdt at all for the host, so the error reported doesn't occur.

Quoted 5 lines

Note that
http://patchwork.ozlabs.org/project/buildroot/list/?series=63524
doesn't contain PATCH 2/3 due to a patchwork issue when associating patches to series, but PATCH 2/3 has been recorded by patchwork.

Patch 2/3 actually doesn't apply, it's a revert of this patch... So I've marked
that one as N/A.

Regards,
Arnout

Quoted 5 lines

Best regards,

Thomas

Signature · 6 lines
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF