Skip to contentSkip to conversation

Rid W=1 warnings from ATA

PATCH Applied Lee Jones 2 participants 18 messages Mar 18, 2021 – Mar 31, 2021 libata

v1 of 2 Applied Latest is v2 →

lore
Share & tools
lore

Lee Jones

author
#0 lore raw

cover Rid W=1 warnings from ATA

This set is part of a larger effort attempting to clean-up W=1 kernel builds, which are currently overwhelmingly riddled with niggly little warnings.

This is set 2 out of 2 sets required.

Lee Jones (15):
ata: pata_pdc202xx_old: Fix some incorrectly named functions
ata: pata_sil680: Add some missing function parameter docs
ata: pata_sis: Remove superfluous param description and supply another
ata: pata_triflex: Repair some misnamed functions and fix some param
descriptions
ata: pata_it821x: Fix possible doc-rotted function names
ata: pata_via: Fix a kernel-doc formatting issue
ata: pata_piccolo: 'ata_tosh_init()' is misnamed in its header
ata: pata_sl82c105: Fix potential doc-rot
ata: pata_opti: Fix spelling issue of 'val' in 'opti_write_reg()'
ata: ata_generic: Fix misspelling of 'ata_generic_init_one()'
ata: pata_legacy: Repair a couple kernel-doc problems
ata: pata_cs5530: Fix misspelling of 'cs5530_init_one()'s 'pdev' param
ata: sata_mv: Fix misnaming of 'mv_bmdma_stop()'
ata: libata-acpi: Fix function name and provide description for

    'prev_gtf'

ata: pata_acpi: Fix some incorrect function param descriptions

 drivers/ata/ata_generic.c       | 2 +-
 drivers/ata/libata-acpi.c       | 3 ++-
 drivers/ata/pata_acpi.c         | 6 +++---
 drivers/ata/pata_cs5530.c       | 2 +-
 drivers/ata/pata_it821x.c       | 4 ++--
 drivers/ata/pata_legacy.c       | 8 ++++----
 drivers/ata/pata_opti.c         | 2 +-
 drivers/ata/pata_pdc202xx_old.c | 4 ++--
 drivers/ata/pata_piccolo.c      | 2 +-
 drivers/ata/pata_sil680.c       | 2 ++
 drivers/ata/pata_sis.c          | 2 +-
 drivers/ata/pata_sl82c105.c     | 2 +-
 drivers/ata/pata_triflex.c      | 7 +++----
 drivers/ata/pata_via.c          | 2 +-
 drivers/ata/sata_mv.c           | 2 +-
 15 files changed, 26 insertions(+), 24 deletions(-)
Cc Alan Cox <[email protected]>
Cc ALWAYS copy <[email protected]>
Cc Andre Hedrick <[email protected]>
Cc Colten Edwards <[email protected]>
Cc Hat Inc <[email protected]>
Cc Jan Harkes <[email protected]>
Cc Jaromir Koutek <[email protected]>
Cc Jens Axboe <[email protected]>
Cc "L.C. Chang" <[email protected]>
Cc Lionel Bouton <[email protected]>
Cc Mark Lord <[email protected]>
Cc Red Hat <[email protected]>
Cc Samuel Thibault <[email protected]>
Cc Torben Mathiasen <[email protected]>
Cc Vojtech Pavlik <[email protected]>
Signature · 1 line
2.27.0
author
#1 lore raw

PATCH 1/15 ata: pata_pdc202xx_old: Fix some incorrectly named functions

Fixes the following W=1 kernel build warning(s):

drivers/ata/pata_pdc202xx_old.c:127: warning: expecting prototype for pdc202xx_configure_dmamode(). Prototype was for pdc202xx_set_dmamode() instead drivers/ata/pata_pdc202xx_old.c:228: warning: expecting prototype for pdc2026x_bmdma_end(). Prototype was for pdc2026x_bmdma_stop() instead

---
 drivers/ata/pata_pdc202xx_old.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/ata/pata_pdc202xx_old.c +2 -2
index 378ed9ea97e90..0c5cbcd28d0db 100644
@@ -115,7 +115,7 @@ static void pdc202xx_set_piomode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	pdc202xx_configure_dmamode	-	set DMA mode in chip
+ *	pdc202xx_set_dmamode	-	set DMA mode in chip
  *	@ap: ATA interface
  *	@adev: ATA device
  *
@@ -214,7 +214,7 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
 }
 
 /**
- *	pdc2026x_bmdma_end		-	DMA engine stop
+ *	pdc2026x_bmdma_stop		-	DMA engine stop
  *	@qc: ATA command
  *
  *	After a DMA completes we need to put the clock back to 33MHz for
Signature · 1 line
2.27.0
author
#2 lore raw

PATCH 2/15 ata: pata_sil680: Add some missing function parameter docs

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/ata/pata_sil680.c:68: warning: Function parameter or member 'adev' not described in 'sil680_seldev' drivers/ata/pata_sil680.c:254: warning: Function parameter or member 'try_mmio' not described in 'sil680_init_chip'

---
 drivers/ata/pata_sil680.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/ata/pata_sil680.c +2 -0
index 7ab9aea3b6305..43215a664b960 100644
@@ -57,6 +57,7 @@ static unsigned long sil680_selreg(struct ata_port *ap, int r)
 /**
  *	sil680_seldev		-	return register base
  *	@ap: ATA interface
+ *	@adev: ATA device
  *	@r: config offset
  *
  *	Turn a config register offset into the right address in PCI space
@@ -244,6 +245,7 @@ static struct ata_port_operations sil680_port_ops = {
 /**
  *	sil680_init_chip		-	chip setup
  *	@pdev: PCI device
+ *	@try_mmio: Indicates to caller whether MMIO should be attempted
  *
  *	Perform all the chip setup which must be done both when the device
  *	is powered up on boot and when we resume in case we resumed from RAM.
Signature · 1 line
2.27.0
author
#3 lore raw

PATCH 3/15 ata: pata_sis: Remove superfluous param description and supply another

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/ata/pata_sis.c:124: warning: Excess function parameter 'deadline' description in 'sis_133_cable_detect' drivers/ata/pata_sis.c:529: warning: Function parameter or member 'mask' not described in 'sis_133_mode_filter'

Cc Jens Axboe <[email protected]>
Cc Andre Hedrick <[email protected]>
Cc Lionel Bouton <[email protected]>
Cc Vojtech Pavlik <[email protected]>
Cc "L.C. Chang" <[email protected]>
---
 drivers/ata/pata_sis.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ata/pata_sis.c +1 -1
index d7cd39a9888a9..b5b764e18adfc 100644
@@ -114,7 +114,6 @@ static int sis_port_base(struct ata_device *adev)
 /**
  *	sis_133_cable_detect - check for 40/80 pin
  *	@ap: Port
- *	@deadline: deadline jiffies for the operation
  *
  *	Perform cable detection for the later UDMA133 capable
  *	SiS chipset.
@@ -521,6 +520,7 @@ static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 /**
  *	sis_133_mode_filter - mode selection filter
  *	@adev: ATA device
+ *	@mask: received mask to manipulate and pass back
  *
  *	Block UDMA6 on devices that do not support it.
  */
Signature · 1 line
2.27.0
author
#4 lore raw

PATCH 4/15 ata: pata_triflex: Repair some misnamed functions and fix some param descriptions

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/ata/pata_triflex.c:143: warning: expecting prototype for triflex_dma_start(). Prototype was for triflex_bmdma_start() instead drivers/ata/pata_triflex.c:159: warning: Function parameter or member 'qc' not described in 'triflex_bmdma_stop' drivers/ata/pata_triflex.c:159: warning: expecting prototype for triflex_dma_stop(). Prototype was for triflex_bmdma_stop() instead

Cc Jens Axboe <[email protected]>
Cc Alan Cox <[email protected]>
Cc Torben Mathiasen <[email protected]>
---
 drivers/ata/pata_triflex.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/ata/pata_triflex.c +3 -4
index 2a4d38b980261..8a033598e7e17 100644
@@ -129,7 +129,7 @@ static void triflex_set_piomode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	triflex_dma_start	-	DMA start callback
+ *	triflex_bmdma_start	-	DMA start callback
  *	@qc: Command in progress
  *
  *	Usually drivers set the DMA timing at the point the set_dmamode call
@@ -146,9 +146,8 @@ static void triflex_bmdma_start(struct ata_queued_cmd *qc)
 }
 
 /**
- *	triflex_dma_stop	-	DMA stop callback
- *	@ap: ATA interface
- *	@adev: ATA device
+ *	triflex_bmdma_stop	-	DMA stop callback
+ *	@qc: ATA command
  *
  *	We loaded new timings in dma_start, as a result we need to restore
  *	the PIO timings in dma_stop so that the next command issue gets the
Signature · 1 line
2.27.0
author
#5 lore raw

PATCH 5/15 ata: pata_it821x: Fix possible doc-rotted function names

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/ata/pata_it821x.c:346: warning: expecting prototype for it821x_passthru_dma_start(). Prototype was for it821x_passthru_bmdma_start() instead drivers/ata/pata_it821x.c:369: warning: expecting prototype for it821x_passthru_dma_stop(). Prototype was for it821x_passthru_bmdma_stop() instead

---
 drivers/ata/pata_it821x.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/ata/pata_it821x.c +2 -2
index 9bac79edbc2ce..0e2265978a34e 100644
@@ -334,7 +334,7 @@ static void it821x_passthru_set_dmamode(struct ata_port *ap, struct ata_device *
 }
 
 /**
- *	it821x_passthru_dma_start	-	DMA start callback
+ *	it821x_passthru_bmdma_start	-	DMA start callback
  *	@qc: Command in progress
  *
  *	Usually drivers set the DMA timing at the point the set_dmamode call
@@ -357,7 +357,7 @@ static void it821x_passthru_bmdma_start(struct ata_queued_cmd *qc)
 }
 
 /**
- *	it821x_passthru_dma_stop	-	DMA stop callback
+ *	it821x_passthru_bmdma_stop	-	DMA stop callback
  *	@qc: ATA command
  *
  *	We loaded new timings in dma_start, as a result we need to restore
Signature · 1 line
2.27.0
author
#6 lore raw

PATCH 6/15 ata: pata_via: Fix a kernel-doc formatting issue

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/ata/pata_via.c:675: warning: Function parameter or member 'pdev' not described in 'via_reinit_one'

---
 drivers/ata/pata_via.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ata/pata_via.c +1 -1
index 38044e6797951..4750320489843 100644
@@ -663,7 +663,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 #ifdef CONFIG_PM_SLEEP
 /**
  *	via_reinit_one		-	reinit after resume
- *	@pdev; PCI device
+ *	@pdev: PCI device
  *
  *	Called when the VIA PATA device is resumed. We must then
  *	reconfigure the fifo and other setup we may have altered. In
Signature · 1 line
2.27.0
author
#7 lore raw

PATCH 7/15 ata: pata_piccolo: 'ata_tosh_init()' is misnamed in its header

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/ata/pata_piccolo.c:87: warning: expecting prototype for ata_tosh_init(). Prototype was for ata_tosh_init_one() instead

---
 drivers/ata/pata_piccolo.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ata/pata_piccolo.c +1 -1
index 35cb0e2632379..389b63b13c706 100644
@@ -74,7 +74,7 @@ static struct ata_port_operations tosh_port_ops = {
 };
 
 /**
- *	ata_tosh_init		-	attach generic IDE
+ *	ata_tosh_init_one		-	attach generic IDE
  *	@dev: PCI device found
  *	@id: match entry
  *
Signature · 1 line
2.27.0
author
#8 lore raw

PATCH 8/15 ata: pata_sl82c105: Fix potential doc-rot

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/ata/pata_sl82c105.c:191: warning: expecting prototype for sl82c105_bmdma_end(). Prototype was for sl82c105_bmdma_stop() instead

---
 drivers/ata/pata_sl82c105.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ata/pata_sl82c105.c +1 -1
index ac7ddd87f188d..8487470e2e01e 100644
@@ -173,7 +173,7 @@ static void sl82c105_bmdma_start(struct ata_queued_cmd *qc)
 }
 
 /**
- *	sl82c105_bmdma_end		-	DMA engine stop
+ *	sl82c105_bmdma_stop		-	DMA engine stop
  *	@qc: ATA command
  *
  *	Reset the DMA engine each use as recommended by the errata
Signature · 1 line
2.27.0
author
#9 lore raw

PATCH 9/15 ata: pata_opti: Fix spelling issue of 'val' in 'opti_write_reg()'

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/ata/pata_opti.c:82: warning: Function parameter or member 'val' not described in 'opti_write_reg' drivers/ata/pata_opti.c:82: warning: Excess function parameter 'value' description in 'opti_write_reg'

Cc Jens Axboe <[email protected]>
Cc Jaromir Koutek <[email protected]>
Cc Jan Harkes <[email protected]>
Cc Mark Lord <[email protected]>
---
 drivers/ata/pata_opti.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ata/pata_opti.c +1 -1
index 06a800a3b0706..01976c4e40330 100644
@@ -69,7 +69,7 @@ static int opti_pre_reset(struct ata_link *link, unsigned long deadline)
 /**
  *	opti_write_reg		-	control register setup
  *	@ap: ATA port
- *	@value: value
+ *	@val: value
  *	@reg: control register number
  *
  *	The Opti uses magic 'trapdoor' register accesses to do configuration
Signature · 1 line
2.27.0
author
#10 lore raw

PATCH 10/15 ata: ata_generic: Fix misspelling of 'ata_generic_init_one()'

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/ata/ata_generic.c:164: warning: expecting prototype for ata_generic_init(). Prototype was for ata_generic_init_one() instead

---
 drivers/ata/ata_generic.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ata/ata_generic.c +1 -1
index 9ff545ce8da3e..20a32e4d501d3 100644
@@ -151,7 +151,7 @@ static int is_intel_ider(struct pci_dev *dev)
 }
 
 /**
- *	ata_generic_init		-	attach generic IDE
+ *	ata_generic_init_one		-	attach generic IDE
  *	@dev: PCI device found
  *	@id: match entry
  *
Signature · 1 line
2.27.0
author
#11 lore raw

PATCH 11/15 ata: pata_legacy: Repair a couple kernel-doc problems

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/ata/pata_legacy.c:606: warning: expecting prototype for opt82c465mv_qc_issue(). Prototype was for opti82c46x_qc_issue() instead drivers/ata/pata_legacy.c:933: warning: Function parameter or member 'probe' not described in 'legacy_init_one' drivers/ata/pata_legacy.c:933: warning: Excess function parameter 'pl' description in 'legacy_init_one' drivers/ata/pata_legacy.c:1024: warning: Function parameter or member 'primary' not described in 'legacy_check_special_cases' drivers/ata/pata_legacy.c:1024: warning: Function parameter or member 'secondary' not described in 'legacy_check_special_cases' drivers/ata/pata_legacy.c:1024: warning: Excess function parameter 'master' description in 'legacy_check_special_cases' drivers/ata/pata_legacy.c:1024: warning: Excess function parameter 'master' description in 'legacy_check_special_cases'

Cc Jens Axboe <[email protected]>
Cc Colten Edwards <[email protected]>
Cc Samuel Thibault <[email protected]>
---
 drivers/ata/pata_legacy.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/ata/pata_legacy.c +4 -4
index 4fd12b20df239..a7235bde6ae87 100644
@@ -588,7 +588,7 @@ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	opt82c465mv_qc_issue		-	command issue
+ *	opti82c46x_qc_issue		-	command issue
  *	@qc: command pending
  *
  *	Called when the libata layer is about to issue a command. We wrap
@@ -923,7 +923,7 @@ static __init int probe_chip_type(struct legacy_probe *probe)
 
 /**
  *	legacy_init_one		-	attach a legacy interface
- *	@pl: probe record
+ *	@probe: probe record
  *
  *	Register an ISA bus IDE interface. Such interfaces are PIO and we
  *	assume do not support IRQ sharing.
@@ -1009,8 +1009,8 @@ static __init int legacy_init_one(struct legacy_probe *probe)
 /**
  *	legacy_check_special_cases	-	ATA special cases
  *	@p: PCI device to check
- *	@master: set this if we find an ATA master
- *	@master: set this if we find an ATA secondary
+ *	@primary: set this if we find an ATA master
+ *	@secondary: set this if we find an ATA secondary
  *
  *	A small number of vendors implemented early PCI ATA interfaces
  *	on bridge logic without the ATA interface being PCI visible.
Signature · 1 line
2.27.0
author
#12 lore raw

PATCH 12/15 ata: pata_cs5530: Fix misspelling of 'cs5530_init_one()'s 'pdev' param

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/ata/pata_cs5530.c:283: warning: Function parameter or member 'pdev' not described in 'cs5530_init_one' drivers/ata/pata_cs5530.c:283: warning: Excess function parameter 'dev' description in 'cs5530_init_one'

---
 drivers/ata/pata_cs5530.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ata/pata_cs5530.c +1 -1
index ad75d02b6dacf..a1b4aaccaa50a 100644
@@ -271,7 +271,7 @@ static int cs5530_init_chip(void)
 
 /**
  *	cs5530_init_one		-	Initialise a CS5530
- *	@dev: PCI device
+ *	@pdev: PCI device
  *	@id: Entry in match table
  *
  *	Install a driver for the newly found CS5530 companion chip. Most of
Signature · 1 line
2.27.0
author
#13 lore raw

PATCH 13/15 ata: sata_mv: Fix misnaming of 'mv_bmdma_stop()'

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/ata/sata_mv.c:1929: warning: expecting prototype for mv_bmdma_stop(). Prototype was for mv_bmdma_stop_ap() instead

---
 drivers/ata/sata_mv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ata/sata_mv.c +1 -1
index eafca46d8feb4..bd23d63435cb4 100644
@@ -1917,7 +1917,7 @@ static void mv_bmdma_start(struct ata_queued_cmd *qc)
 }
 
 /**
- *	mv_bmdma_stop - Stop BMDMA transfer
+ *	mv_bmdma_stop_ap - Stop BMDMA transfer
  *	@ap: port to stop
  *
  *	Clears the ATA_DMA_START flag in the bmdma control register
Signature · 1 line
2.27.0
author
#14 lore raw

PATCH 14/15 ata: libata-acpi: Fix function name and provide description for 'prev_gtf'

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/ata/libata-acpi.c:493: warning: expecting prototype for ata_acpi_gtm_xfermode(). Prototype was for ata_acpi_gtm_xfermask() instead drivers/ata/libata-acpi.c:648: warning: Function parameter or member 'prev_gtf' not described in 'ata_acpi_run_tf'

---
 drivers/ata/libata-acpi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/ata/libata-acpi.c +2 -1
index 224e3486e9a5d..7a7d6642edcc5 100644
@@ -476,7 +476,7 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf)
 }
 
 /**
- * ata_acpi_gtm_xfermode - determine xfermode from GTM parameter
+ * ata_acpi_gtm_xfermask - determine xfermode from GTM parameter
  * @dev: target device
  * @gtm: GTM parameter to use
  *
@@ -624,6 +624,7 @@ static int ata_acpi_filter_tf(struct ata_device *dev,
  * ata_acpi_run_tf - send taskfile registers to host controller
  * @dev: target ATA device
  * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7)
+ * @prev_gtf: previous command
  *
  * Outputs ATA taskfile to standard ATA host controller.
  * Writes the control, feature, nsect, lbal, lbam, and lbah registers.
Signature · 1 line
2.27.0
author
#15 lore raw

PATCH 15/15 ata: pata_acpi: Fix some incorrect function param descriptions

In reply to Lee Jones

Fixes the following W=1 kernel build warning(s):

drivers/ata/pata_acpi.c:38: warning: Function parameter or member 'link' not described in 'pacpi_pre_reset' drivers/ata/pata_acpi.c:38: warning: Excess function parameter 'ap' description in 'pacpi_pre_reset' drivers/ata/pata_acpi.c:74: warning: Function parameter or member 'ap' not described in 'pacpi_discover_modes' drivers/ata/pata_acpi.c:74: warning: Excess function parameter 'mask' description in 'pacpi_discover_modes' drivers/ata/pata_acpi.c:239: warning: Function parameter or member 'id' not described in 'pacpi_init_one' drivers/ata/pata_acpi.c:239: warning: Excess function parameter 'ent' description in 'pacpi_init_one'

---
 drivers/ata/pata_acpi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/ata/pata_acpi.c +3 -3
index fa2bfc344a976..ade4c3eee2304 100644
@@ -28,7 +28,7 @@ struct pata_acpi {
 
 /**
  *	pacpi_pre_reset	-	check for 40/80 pin
- *	@ap: Port
+ *	@link: ATA link
  *	@deadline: deadline jiffies for the operation
  *
  *	Perform the PATA port setup we need.
@@ -63,8 +63,8 @@ static int pacpi_cable_detect(struct ata_port *ap)
 
 /**
  *	pacpi_discover_modes	-	filter non ACPI modes
+ *	@ap: ATA port
  *	@adev: ATA device
- *	@mask: proposed modes
  *
  *	Try the modes available and see which ones the ACPI method will
  *	set up sensibly. From this we get a mask of ACPI modes we can use
@@ -224,7 +224,7 @@ static struct ata_port_operations pacpi_ops = {
 /**
  *	pacpi_init_one - Register ACPI ATA PCI device with kernel services
  *	@pdev: PCI device to register
- *	@ent: Entry in pacpi_pci_tbl matching with @pdev
+ *	@id: PCI device ID
  *
  *	Called from kernel PCI layer.
  *
Signature · 1 line
2.27.0
author
#16 lore raw
In reply to Lee Jones
Quoted 22 lines · Lee Jones

This set is part of a larger effort attempting to clean-up W=1 kernel builds, which are currently overwhelmingly riddled with niggly little warnings.

This is set 2 out of 2 sets required.

Lee Jones (15):
ata: pata_pdc202xx_old: Fix some incorrectly named functions
ata: pata_sil680: Add some missing function parameter docs
ata: pata_sis: Remove superfluous param description and supply another
ata: pata_triflex: Repair some misnamed functions and fix some param
descriptions
ata: pata_it821x: Fix possible doc-rotted function names
ata: pata_via: Fix a kernel-doc formatting issue
ata: pata_piccolo: 'ata_tosh_init()' is misnamed in its header
ata: pata_sl82c105: Fix potential doc-rot
ata: pata_opti: Fix spelling issue of 'val' in 'opti_write_reg()'
ata: ata_generic: Fix misspelling of 'ata_generic_init_one()'
ata: pata_legacy: Repair a couple kernel-doc problems
ata: pata_cs5530: Fix misspelling of 'cs5530_init_one()'s 'pdev' param
ata: sata_mv: Fix misnaming of 'mv_bmdma_stop()'
ata: libata-acpi: Fix function name and provide description for

Quoted 2 lines
    'prev_gtf'

ata: pata_acpi: Fix some incorrect function param descriptions

Would you like me to resubmit these?

Quoted 33 lines
 drivers/ata/ata_generic.c       | 2 +-
 drivers/ata/libata-acpi.c       | 3 ++-
 drivers/ata/pata_acpi.c         | 6 +++---
 drivers/ata/pata_cs5530.c       | 2 +-
 drivers/ata/pata_it821x.c       | 4 ++--
 drivers/ata/pata_legacy.c       | 8 ++++----
 drivers/ata/pata_opti.c         | 2 +-
 drivers/ata/pata_pdc202xx_old.c | 4 ++--
 drivers/ata/pata_piccolo.c      | 2 +-
 drivers/ata/pata_sil680.c       | 2 ++
 drivers/ata/pata_sis.c          | 2 +-
 drivers/ata/pata_sl82c105.c     | 2 +-
 drivers/ata/pata_triflex.c      | 7 +++----
 drivers/ata/pata_via.c          | 2 +-
 drivers/ata/sata_mv.c           | 2 +-
 15 files changed, 26 insertions(+), 24 deletions(-)
Cc Alan Cox <[email protected]>
Cc ALWAYS copy <[email protected]>
Cc Andre Hedrick <[email protected]>
Cc Colten Edwards <[email protected]>
Cc Hat Inc <[email protected]>
Cc Jan Harkes <[email protected]>
Cc Jaromir Koutek <[email protected]>
Cc Jens Axboe <[email protected]>
Cc "L.C. Chang" <[email protected]>
Cc Lionel Bouton <[email protected]>
Cc Mark Lord <[email protected]>
Cc Red Hat <[email protected]>
Cc Samuel Thibault <[email protected]>
Cc Torben Mathiasen <[email protected]>
Cc Vojtech Pavlik <[email protected]>
Signature · 4 lines
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
Applied
#17 lore raw
In reply to Lee Jones
Quoted 5 lines · Lee Jones

This set is part of a larger effort attempting to clean-up W=1 kernel builds, which are currently overwhelmingly riddled with niggly little warnings.

This is set 2 out of 2 sets required.

Applied, thanks.

Signature · 1 line
Jens Axboe