iommu/vt-d: Add Kconfig option to enable/disable scalable mode
PATCH v3 1/1 iommu/vt-d: Add Kconfig option to enable/disable scalable mode
This adds Kconfig option INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON to make it easier for distributions to enable or disable the Intel IOMMU scalable mode by default during kernel build.
Signed-off-by Lu Baolu <[email protected]>
--- drivers/iommu/Kconfig | 12 ++++++++++++ drivers/iommu/intel-iommu.c | 7 ++++++- 2 files changed, 18 insertions(+), 1 deletion(-)
drivers/iommu/Kconfig +12 -0
@@ -242,6 +242,18 @@ config INTEL_IOMMU_FLOPPY_WA workaround will setup a 1:1 mapping for the first 16MiB to make floppy (an ISA device) work. +config INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON + prompt "Enable Intel IOMMU scalable mode by default" + depends on INTEL_IOMMU + help + Selecting this option will enable by default the scalable mode if + hardware presents the capability. The scalable mode is defined in + VT-d 3.0. The scalable mode capability could be checked by reading + /sys/devices/virtual/iommu/dmar*/intel-iommu/ecap. If this option + is not selected, scalable mode support could also be enabled by + passing intel_iommu=sm_on to the kernel. If not sure, please use + the default value. + config IRQ_REMAP bool "Support for Interrupt Remapping" depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI
drivers/iommu/intel-iommu.c +6 -1
@@ -355,9 +355,14 @@ static phys_addr_t intel_iommu_iova_to_phys(struct iommu_domain *domain,int dmar_disabled =0 ;#else int dmar_disabled =1 ; -#endif /*CONFIG_INTEL_IOMMU_DEFAULT_ON*/ +#endif /* CONFIG_INTEL_IOMMU_DEFAULT_ON */ +#ifdef INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON +int intel_iommu_sm =1 ; +#else int intel_iommu_sm; +#endif /* INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON */ +int intel_iommu_enabled =0 ;EXPORT_SYMBOL_GPL (intel_iommu_enabled);
Signature · 6 lines
2.17.1 _______________________________________________ iommu mailing list [email protected] https://lists.linuxfoundation.org/mailman/listinfo/iommu
Quoted 5 lines · Lu Baolu
This adds
KconfigoptionINTEL_IOMMU_SCALABLE_MODE_DEFAULT_ONto make it easier for distributions to enable or disable the Intel IOMMU scalable mode by default during kernel build.Signed-off-by Lu Baolu<[email protected]>
Queued for v5.6.
Thanks,
-baolu
_______________________________________________
iommu mailing list
[email protected]
https://lists.linuxfoundation.org/mailman/listinfo/iommu