tpm_tis driver failed to suspend, error -62
Hi Rajiv,
Not sure if I should send this to you, please kindly forward it to the appropriate person if not, thanks.
Peter has encountered a problem during suspend, the tpm_tis driver's suspend callback will fail, the relevant message is:
[ 192.281757] PM: Syncing filesystems ... done. [ 192.692479] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 192.708159] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 192.724151] Suspending console(s) (use no_console_suspend to debug) [ 192.724612] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 192.724785] sd 2:0:0:0: [sda] Stopping disk [ 197.512047] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 197.512055] legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62 [ 197.512057] PM: Device 00:08 failed to suspend: error -62 [ 197.512058] PM: Some devices failed to suspend
And the problem has been there since v2.6.32(shipped in ubuntu 10.04), and the latest upstream tree(v3.9-rcx) also has this problem. The bug link is here:
https://bugzilla.kernel.org/show_bug.cgi?id=45761
Please feel free to ask for more information, thanks.
-Aaron
Error 62 is ETIME. The driver is timing out during a tpm_send, possibly trying to send the Tpm_SaveState command.
It may be that you cannot talk to the TPM at all. Have you tried sending messages to the TPM before suspending?
Are there any other tpm entries in the syslog? Like at boot?
What model TPM is it?
Quoted 41 lines · Aaron Lu
Hi Rajiv,
Not sure if I should send this to you, please kindly forward it to the appropriate person if not, thanks.
Peter has encountered a problem during suspend, the
tpm_tisdriver's suspend callback will fail, the relevant message is:[ 192.281757] PM: Syncing filesystems ... done. [ 192.692479] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 192.708159] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 192.724151] Suspending console(s) (use no_console_suspend to debug) [ 192.724612] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 192.724785] sd 2:0:0:0: [sda] Stopping disk [ 197.512047] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 197.512055] legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62 [ 197.512057] PM: Device 00:08 failed to suspend: error -62 [ 197.512058] PM: Some devices failed to suspendAnd the problem has been there since v2.6.32(shipped in ubuntu 10.04), and the latest upstream tree(v3.9-rcx) also has this problem. The bug link is here:
https://bugzilla.kernel.org/show_bug.cgi?id=45761Please feel free to ask for more information, thanks.
-Aaron
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_mar
_______________________________________________
tpmdd-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel
Hi! Sadly, I have to say that I'm totally oblivious to power-related stuff both in software and hardware, so I have no idea what you are asking or proposing.. :)
I don't know if you have access to the files I've included in the bug report, so here are the links to them:
https://launchpadlibrarian.net/105830773/lspci.txt
https://launchpadlibrarian.net/95994294/AcpiTables.txt
https://launchpadlibrarian.net/95994318/BootDmesg.txt
https://launchpadlibrarian.net/95994354/UdevDb.txt
Regarding the syslog during boot, is that the same as the BootDmesg I've attached? Or should I search in another log file? I'm not sure about the model, but I was hoping you could deduct something from the UdevDb or the lspci output above.
BR,
Peter
2013-03-19 16:50 skrev Luigi Semenzato:
Quoted 55 lines
Error 62 is ETIME. The driver is timing out during a
tpm_send, possibly trying to send theTpm_SaveStatecommand.It may be that you cannot talk to the TPM at all. Have you tried sending messages to the TPM before suspending?
Are there any other tpm entries in the syslog? Like at boot?
What model TPM is it?
Quoted 43 lines · Aaron Lu
Hi Rajiv,
Not sure if I should send this to you, please kindly forward it to the appropriate person if not, thanks.
Peter has encountered a problem during suspend, the
tpm_tisdriver's suspend callback will fail, the relevant message is:[ 192.281757] PM: Syncing filesystems ... done. [ 192.692479] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 192.708159] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 192.724151] Suspending console(s) (use no_console_suspend to debug) [ 192.724612] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 192.724785] sd 2:0:0:0: [sda] Stopping disk [ 197.512047] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 197.512055] legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62 [ 197.512057] PM: Device 00:08 failed to suspend: error -62 [ 197.512058] PM: Some devices failed to suspendAnd the problem has been there since v2.6.32(shipped in ubuntu 10.04), and the latest upstream tree(v3.9-rcx) also has this problem. The bug link is here:
https://bugzilla.kernel.org/show_bug.cgi?id=45761Please feel free to ask for more information, thanks.
-Aaron
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_mar
_______________________________________________
tpmdd-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel
A message that is not in the archive (sent off-list or not yet received): CAEQAOwpmnLXBCJQTf_xU-oSKvAtmpQjHWwMYDm_QOsP+1Kd_aQ@mail.gmail.com
Sending again, plain text.
---
Hey Aaron,
Sorry for the delay. Can you send us the dmesg output after setting loglevel=7 at boot time? Additionally, can you send us the TPM manufacturer model/version?
# cat /sys/devices/pnp0/00\:0*/caps
Adding Kent.
Cheers,
Rajiv
Quoted 95 lines · Rajiv Andrade
Hey Aaron,
Sorry for the delay. Can you send us the dmesg output after setting loglevel=7 at boot time? Additionally, can you send us the TPM manufacturer model/version?
# cat /sys/devices/pnp0/00\:0*/capsAdding Kent.
Cheers,
RajivQuoted 78 lines · On Thu, Mar 21, 2013 at 10:17 AM, <[email protected]> wrote:
Hi! Sadly, I have to say that I'm totally oblivious to power-related stuff both in software and hardware, so I have no idea what you are asking or proposing.. :)
I don't know if you have access to the files I've included in the bug report, so here are the links to them:
https://launchpadlibrarian.net/105830773/lspci.txt
https://launchpadlibrarian.net/95994294/AcpiTables.txt
https://launchpadlibrarian.net/95994318/BootDmesg.txt
https://launchpadlibrarian.net/95994354/UdevDb.txtRegarding the syslog during boot, is that the same as the BootDmesg I've attached? Or should I search in another log file?
I'm not sure about the model, but I was hoping you could deduct something from the UdevDb or the lspci output above.BR,
Peter2013-03-19 16:50 skrev Luigi Semenzato:
Quoted 56 lines
Error 62 is ETIME. The driver is timing out during a
tpm_send, possibly trying to send theTpm_SaveStatecommand.It may be that you cannot talk to the TPM at all. Have you tried sending messages to the TPM before suspending?
Are there any other tpm entries in the syslog? Like at boot?
What model TPM is it?
Quoted 44 lines · Aaron Lu
Hi Rajiv,
Not sure if I should send this to you, please kindly forward it to the appropriate person if not, thanks.
Peter has encountered a problem during suspend, the
tpm_tisdriver's suspend callback will fail, the relevant message is:[ 192.281757] PM: Syncing filesystems ... done. [ 192.692479] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 192.708159] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 192.724151] Suspending console(s) (use no_console_suspend to debug) [ 192.724612] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 192.724785] sd 2:0:0:0: [sda] Stopping disk [ 197.512047] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 197.512055] legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62 [ 197.512057] PM: Device 00:08 failed to suspend: error -62 [ 197.512058] PM: Some devices failed to suspendAnd the problem has been there since v2.6.32(shipped in ubuntu 10.04), and the latest upstream tree(v3.9-rcx) also has this problem. The bug link is here:
https://bugzilla.kernel.org/show_bug.cgi?id=45761Please feel free to ask for more information, thanks.
-Aaron
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_mar
_______________________________________________
tpmdd-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel
Quoted 9 lines · Rajiv Andrade
Hey Aaron,
Sorry for the delay. Can you send us the dmesg output after setting loglevel=7 at boot time? Additionally, can you send us the TPM manufacturer model/version?
# cat /sys/devices/pnp0/00\:0*/capsAdding Kent.
Thanks Rajiv.
Peter,
Please kindly provide the required information, thanks.
-Aaron
Quoted 100 lines
Cheers,
RajivQuoted 95 lines · Rajiv Andrade
Hey Aaron,
Sorry for the delay. Can you send us the dmesg output after setting loglevel=7 at boot time? Additionally, can you send us the TPM manufacturer model/version?
# cat /sys/devices/pnp0/00\:0*/capsAdding Kent.
Cheers,
RajivQuoted 78 lines · On Thu, Mar 21, 2013 at 10:17 AM, <[email protected]> wrote:
Hi! Sadly, I have to say that I'm totally oblivious to power-related stuff both in software and hardware, so I have no idea what you are asking or proposing.. :)
I don't know if you have access to the files I've included in the bug report, so here are the links to them:
https://launchpadlibrarian.net/105830773/lspci.txt
https://launchpadlibrarian.net/95994294/AcpiTables.txt
https://launchpadlibrarian.net/95994318/BootDmesg.txt
https://launchpadlibrarian.net/95994354/UdevDb.txtRegarding the syslog during boot, is that the same as the BootDmesg I've attached? Or should I search in another log file?
I'm not sure about the model, but I was hoping you could deduct something from the UdevDb or the lspci output above.BR,
Peter2013-03-19 16:50 skrev Luigi Semenzato:
Quoted 56 lines
Error 62 is ETIME. The driver is timing out during a
tpm_send, possibly trying to send theTpm_SaveStatecommand.It may be that you cannot talk to the TPM at all. Have you tried sending messages to the TPM before suspending?
Are there any other tpm entries in the syslog? Like at boot?
What model TPM is it?
Quoted 44 lines · Aaron Lu
Hi Rajiv,
Not sure if I should send this to you, please kindly forward it to the appropriate person if not, thanks.
Peter has encountered a problem during suspend, the
tpm_tisdriver's suspend callback will fail, the relevant message is:[ 192.281757] PM: Syncing filesystems ... done. [ 192.692479] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 192.708159] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 192.724151] Suspending console(s) (use no_console_suspend to debug) [ 192.724612] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 192.724785] sd 2:0:0:0: [sda] Stopping disk [ 197.512047] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 197.512055] legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62 [ 197.512057] PM: Device 00:08 failed to suspend: error -62 [ 197.512058] PM: Some devices failed to suspendAnd the problem has been there since v2.6.32(shipped in ubuntu 10.04), and the latest upstream tree(v3.9-rcx) also has this problem. The bug link is here:
https://bugzilla.kernel.org/show_bug.cgi?id=45761Please feel free to ask for more information, thanks.
-Aaron
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_mar
_______________________________________________
tpmdd-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel
Hi Aaron, Rajob, PeterA and everybody else,
(sorry for the late reply)
Quoted 9 lines · Rajiv Andrade
Quoted 8 lines
Sorry for the delay. Can you send us the dmesg output after setting loglevel=7 at boot time? Additionally, can you send us the TPM manufacturer model/version
Quoted 5 lines · On Thu, Mar 21, 2013 at 10:17 AM, <[email protected]> wrote:
Quoted 4 lines
Hi! Sadly, I have to say that I'm totally oblivious to power-related stuff both in software and hardware, so I have no idea what you are asking or proposing.. :
According to the BootDmesg.txt it's an Infineon TPM
[ 0.293936] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 12.413651] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
@PeterA:
Can you perhaps try find out the exact tpm version?
1) Install trousers and tpm_tools (emerge app-crypt/trousers app-crypt/tpm-tools)
2) Kill the tcsd and run it in the foreground
# pkill -9 tcsd # tcsd -f (if it says up and running you can send it to background) 3) Run #tpm_version and post the output.
Also the flags etc would perhaps be handy, they can be retrieved via sysfs - on you machine it _should_ be
# cat /sys/devices/pnp0/00:0a/* and also post the output.
What also might be worth a look - in your bugzilla it states:
[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16) [ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters. [ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attempting to read a pcr value [ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
Can you perhaps try to enable your TPM in the BIOS? It's quite often hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings.
If your system does not have bios support for TPMs, please tell me so and I'll try to help you out.
Thanks,
PeterH
Hi Peter!
Thank you for your help! I'm going away for the Easter holiday, and will be back on Monday/Tuesday. I will try to supply the information you need at that time, since I won't be bringing my laptop with me.
BR
Peter A
2013-03-28 14:12 skrev [email protected]:
Quoted 58 lines
Hi Aaron, Rajob, PeterA and everybody else,
(sorry for the late reply)
Quoted 9 lines · Rajiv Andrade
Quoted 8 lines
Sorry for the delay. Can you send us the dmesg output after setting loglevel=7 at boot time? Additionally, can you send us the TPM manufacturer model/version
Quoted 5 lines · On Thu, Mar 21, 2013 at 10:17 AM, <[email protected]> wrote:
Quoted 4 lines
Hi! Sadly, I have to say that I'm totally oblivious to power-related stuff both in software and hardware, so I have no idea what you are asking or proposing.. :
According to the BootDmesg.txt it's an Infineon TPM
[ 0.293936] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 12.413651] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)@PeterA:
Can you perhaps try find out the exact tpm version?
1) Install trousers andtpm_tools(emerge app-crypt/trousers app-crypt/tpm-tools)
2) Kill the tcsd and run it in the foreground# pkill -9 tcsd # tcsd -f (if it says up and running you can send it to background) 3) Run #tpm_version and post the output.Also the flags etc would perhaps be handy, they can be retrieved via sysfs - on you machine it _should_ be
# cat /sys/devices/pnp0/00:0a/* and also post the output.What also might be worth a look - in your bugzilla it states:
[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16) [ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters. [ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attempting to read a pcr value [ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)Can you perhaps try to enable your TPM in the BIOS? It's quite often hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings. If your system does not have bios support for TPMs, please tell me so and I'll try to help you out.
Thanks,
PeterH
2013-03-28 14:12 skrev [email protected]:
Quoted 10 lines
Hi Aaron, Rajob, PeterA and everybody else
@PeterA:
Can you perhaps try find out the exact tpm version?
1) Install trousers andtpm_tools(emerge app-crypt/trousers app-crypt/tpm-tools)
2) Kill the tcsd and run it in the foreground# pkill -9 tcsd # tcsd -f (if it says up and running you can send it to background)
root@zepto:/home/peter# tcsd -f TCSD TDDL ioctl: (25) Inappropriate ioctl for device TCSD TDDL Falling back to Read/Write device support. TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087
Quoted 2 lines
3) Run
#tpm_version and post the output.
root@zepto:/home/peter# tpm_version Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011 (17), Communication failure
I will try to restart the laptop, as well as check the bios settings, and get back to you on this one.
Quoted 6 lines
Also the flags etc would perhaps be handy, they can be retrieved via sysfs - on you machine it _should_ be
# cat /sys/devices/pnp0/00:0a/* and also post the output.
root@zepto:/home/peter# ls /sys/devices/pnp0/00\:0a/ driver/ id power/ subsystem/ firmware_node/ options resources uevent root@zepto:/home/peter# cat /sys/devices/pnp0/00\:0a/options root@zepto:/home/peter# cat /sys/devices/pnp0/00\:0a/resources state = active irq 12 root@zepto:/home/peter# cat /sys/devices/pnp0/00\:0a/id SYN1902 SYN1900 SYN0002 PNP0f13 root@zepto:/home/peter# cat /sys/devices/pnp0/00\:0a/uevent DRIVER=i8042 aux
Cheers,
Peter A
Quoted 19 lines
What also might be worth a look - in your bugzilla it states:
[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16) [ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters. [ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attempting to read a pcr value [ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)Can you perhaps try to enable your TPM in the BIOS? It's quite often hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings. If your system does not have bios support for TPMs, please tell me so and I'll try to help you out.
Thanks,
PeterH
Peter Hüwe
maintainerHi Peter,
Quoted 6 lines
Quoted 4 lines
Also the flags etc would perhaps be handy, they can be retrieved via sysfs - on you machine it _should_ be
# cat /sys/devices/pnp0/00:0a/* and also post the output.root@zepto:/home/peter# ls /sys/devices/pnp0/00\:0a/
Okay it seems it's not 00:0a ;/
Can you check the node in dmesg again?
You can try to find it also by
find /sys -name '*duration*'
Thanks,
Peter
2013-04-01 23:12 skrev Peter Hüwe:
Hi Peter,
Also the flags etc would perhaps be handy, they can be
retrieved
via
sysfs - on you machine it _should_ be # cat
/sys/devices/pnp0/00:0a/* and also post the output.
root@zepto:/home/peter# ls /sys/devices/pnp0/00\:0a/
Okay it seems it's not 00:0a ;/ Can you check the node in dmesg
again? You can try to find it also by find /sys -name '*duration*'
root@zepto:/home/peter# find /sys -name '*duration*' /sys/devices/pnp0/00:08/durations and lots of usb devices...
root@zepto:/home/peter# cat /sys/devices/pnp0/00\:08/ active durations misc/ power/ subsystem/ cancel enabled options ppi/ temp_deactivated caps firmware_node/ owned pubek timeouts driver/ id pcrs resources uevent
root@zepto:/home/peter# cat /sys/devices/pnp0/00\:08/* 1000000 4000000 152000000 [adjusted] IFX0102 PNP0c31 state = active mem 0xfed40000-0xfed44fff io 0x4e-0x4f io 0x1670-0x167f irq 11 752000 2000000 752000 752000 [adjusted] DRIVER=tpm_tis
I don't know if you want me to cat a specific file.. Perhaps the above is enough?
/Peter A
Thanks, Peter
2013-03-28 14:12 skrev [email protected]:
Quoted 9 lines
What also might be worth a look - in your bugzilla it states:
[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16) [ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters. [ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attempting to read a pcr value [ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
Quoted 6 lines
Can you perhaps try to enable your TPM in the BIOS? It's quite often hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings. If your system does not have bios support for TPMs, please tell me so and I'll try to help you out.
I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...
root@zepto:/home/peter# dmesg | grep tpm [ 14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 14.748276] tpm_tis 00:08: Adjusting TPM timeout parameters. [ 34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 root@zepto:/home/peter# tpm_version Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011 (17), Communication failure root@zepto:/home/peter# tcsd -f TCSD TDDL ioctl: (25) Inappropriate ioctl for device TCSD TDDL Falling back to Read/Write device support. TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087
/Peter A
Hi Peter,
Quoted 23 lines · On Mon, Apr 1, 2013 at 4:17 PM, <[email protected]> wrote:
2013-03-28 14:12 skrev [email protected]:
Quoted 11 lines
What also might be worth a look - in your bugzilla it states:
[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16) [ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters. [ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attempting to read a pcr value [ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)Quoted 7 lines
Can you perhaps try to enable your TPM in the BIOS? It's quite often hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings.
If your system does not have bios support for TPMs, please tell me so and I'll try to help you out.I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...
Quoted 14 lines
root@zepto:/home/peter# dmesg | grep tpm [ 14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 14.748276] tpm_tis 00:08: Adjusting TPM timeout parameters. [ 34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 root@zepto:/home/peter# tpm_version Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011 (17), Communication failure root@zepto:/home/peter# tcsd -f TCSD TDDL ioctl: (25) Inappropriate ioctl for device TCSD TDDL Falling back to Read/Write device support. TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087
Can you cat /sys/class/misc/tpm0/device/timeouts? Ivan Pryvalov
reported that his TPM showed values that were too small to keep from causing timeouts waiting on TPM commands, but too big to trigger the driver's code to scale them. (He saw 12000 for the 3 timeout values.)
If you're seeing similar values, can you try the attached patch?
Thanks,
Kent
Quoted 12 lines
/Peter A
------------------------------------------------------------------------------
Own the Future-Intel® Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
tpmdd-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel
commit 31811c388aa29a9a94a68f19112773386daf3db9
Author: Kent Yoder <[email protected]> Date: Tue Mar 26 13:41:49 2013 -0500
test commit for ivan
drivers/char/tpm/tpm.c +3 -0
@@ -563,6 +563,9 @@ int tpm_get_timeouts(struct tpm_chip *chip)/* timeouts in msec rather usec */ scale =1000 ; chip->vendor.timeout_adjusted = true; + }else if (timeout && timeout <20000 ) { + scale =100 ; + chip->vendor.timeout_adjusted = true; }if (timeout) chip->vendor.timeout_a =usecs_to_jiffies (timeout * scale);
2013-04-02 16:03 skrev Kent Yoder:
Quoted 41 lines
Hi Peter,
Quoted 23 lines · On Mon, Apr 1, 2013 at 4:17 PM, <[email protected]> wrote:
2013-03-28 14:12 skrev [email protected]:
Quoted 11 lines
What also might be worth a look - in your bugzilla it states:
[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16) [ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters. [ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attempting to read a pcr value [ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)Quoted 7 lines
Can you perhaps try to enable your TPM in the BIOS? It's quite often hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings.
If your system does not have bios support for TPMs, please tell me so and I'll try to help you out.I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...
Quoted 14 lines
root@zepto:/home/peter# dmesg | grep tpm [ 14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 14.748276] tpm_tis 00:08: Adjusting TPM timeout parameters. [ 34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 root@zepto:/home/peter# tpm_version Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011 (17), Communication failure root@zepto:/home/peter# tcsd -f TCSD TDDL ioctl: (25) Inappropriate ioctl for device TCSD TDDL Falling back to Read/Write device support. TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087
Quoted 5 lines
Can you cat
/sys/class/misc/tpm0/device/timeouts? Ivan Pryvalov
reported that his TPM showed values that were too small to keep from causing timeouts waiting on TPM commands, but too big to trigger the driver's code to scale them. (He saw 12000 for the 3 timeout values.)
Hi Kent
The values I'm seeing are:
root@zepto:~# cat /sys/class/misc/tpm0/device/timeouts 752000 2000000 752000 752000 [adjusted]
So I guess these are within a normal range?
Thanks,
Peter
Quoted 18 lines
If you're seeing similar values, can you try the attached patch?
Thanks,
KentQuoted 13 lines
/Peter A
------------------------------------------------------------------------------
Own the Future-Intel® Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
tpmdd-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel
Quoted 51 lines · On Sat, Apr 06, 2013 at 06:00:59PM +0200, [email protected] wrote:
2013-04-02 16:03 skrev Kent Yoder:
Quoted 44 lines
Hi Peter,
Quoted 26 lines · On Mon, Apr 1, 2013 at 4:17 PM, <[email protected]> wrote:
2013-03-28 14:12 skrev [email protected]:
Quoted 12 lines
What also might be worth a look - in your bugzilla it states:
[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16) [ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters. [ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attempting to read a pcr value [ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)Quoted 9 lines
Can you perhaps try to enable your TPM in the BIOS? It's quite often
hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings.
If your system does not have bios support for TPMs, please tell me so
and I'll try to help you out.I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...
Quoted 14 lines
root@zepto:/home/peter# dmesg | grep tpm [ 14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 14.748276] tpm_tis 00:08: Adjusting TPM timeout parameters. [ 34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 root@zepto:/home/peter# tpm_version Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011 (17), Communication failure root@zepto:/home/peter# tcsd -f TCSD TDDL ioctl: (25) Inappropriate ioctl for device TCSD TDDL Falling back to Read/Write device support. TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087Quoted 6 lines
Can you cat
/sys/class/misc/tpm0/device/timeouts? Ivan Pryvalov
reported that his TPM showed values that were too small to keep from causing timeouts waiting on TPM commands, but too big to trigger the driver's code to scale them. (He saw 12000 for the 3 timeout values.)
Quoted 8 lines
Hi Kent
The values I'm seeing are:
root@zepto:~# cat /sys/class/misc/tpm0/device/timeouts 752000 2000000 752000 752000 [adjusted]So I guess these are within a normal range?
Yes, these look normal. So it seems you can send commands to the TPM
up until you try to suspend? Can you try to cat other files like /sys/class/misc/tpm0/device/pcrs? This is the simplest way to send some command to the TPM...
Kent
Quoted 21 lines
Thanks,
PeterQuoted 18 lines
If you're seeing similar values, can you try the attached patch?
Thanks,
KentQuoted 13 lines
/Peter A
------------------------------------------------------------------------------
Own the Future-Intel® Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
tpmdd-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel
2013-04-11 23:41 skrev Kent Yoder:
Quoted 65 lines · On Sat, Apr 06, 2013 at 06:00:59PM +0200, [email protected] wrote:
Quoted 55 lines
2013-04-02 16:03 skrev Kent Yoder:
Quoted 11 lines
Hi Peter,
Quoted 8 lines · On Mon, Apr 1, 2013 at 4:17 PM, <[email protected]> wrote:
2013-03-28 14:12 skrev [email protected]:
Quoted 7 lines
What also might be worth a look - in your bugzilla it states:
[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16) [ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters. [ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attemptingto
Quoted 18 lines
Quoted 18 lines
Quoted 5 lines
read a pcr
value[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)Quoted 9 lines
Can you perhaps try to enable your TPM in the BIOS? It's quite often
hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings.
If your system does not have bios support for TPMs, please tell me so
and I'll try to help you out.I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...
Quoted 8 lines
Quoted 8 lines
root@zepto:/home/peter# dmesg | grep tpm [ 14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 14.748276] tpm_tis 00:08: Adjusting TPM timeout parameters. [ 34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 root@zepto:/home/peter# tpm_version Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011(17),
Quoted 9 lines
Quoted 6 lines
Communication failure
root@zepto:/home/peter# tcsd -f TCSD TDDL ioctl: (25) Inappropriate ioctl for device TCSD TDDL Falling back to Read/Write device support. TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087Can you cat
/sys/class/misc/tpm0/device/timeouts? Ivan Pryvalov
reported that his TPM showed values that were too small to keepfrom
Quoted 1 line
causing timeouts waiting on TPM commands, but too big to trigger
the
Quoted 3 lines
driver's code to scale them. (He saw 12000 for the 3 timeout values.)
Quoted 8 lines
Hi Kent
The values I'm seeing are:
root@zepto:~# cat /sys/class/misc/tpm0/device/timeouts 752000 2000000 752000 752000 [adjusted]So I guess these are within a normal range?
Quoted 8 lines
Yes, these look normal. So it seems you can send commands to the
TPM
up until you try to suspend? Can you try to cat other files like/sys/class/misc/tpm0/device/pcrs? This is the simplest way to send some command to the TPM...Kent
Hi Kent, I'm sorry I haven't replied to this message before. I must have missed it!
root@zepto:/sys/class/misc/tpm0# ll drwxr-xr-x 3 root root 0 Apr 23 16:20 ./ drwxr-xr-x 3 root root 0 Apr 23 16:20 ../ -r--r--r-- 1 root root 4096 Apr 23 16:26 dev lrwxrwxrwx 1 root root 0 Apr 23 16:26 device -> ../../../00:08/ drwxr-xr-x 2 root root 0 Apr 23 16:26 power/ lrwxrwxrwx 1 root root 0 Apr 23 16:20 subsystem -> ../../../../../class/misc/ -rw-r--r-- 1 root root 4096 Apr 23 16:20 uevent
root@zepto:/sys/class/misc/tpm0# cat dev 10:224 root@zepto:/sys/class/misc/tpm0# cat device/pcrs (prints nothing after a delay of a second or so) root@zepto:/sys/class/misc/tpm0# cat uevent MAJOR=10 MINOR=224 DEVNAME=tpm0 root@zepto:/sys/class/misc/tpm0# cat device/active root@zepto:/sys/class/misc/tpm0# cat device/cancel cat: device/cancel: Permission denied root@zepto:/sys/class/misc/tpm0# cat device/caps root@zepto:/sys/class/misc/tpm0# cat device/durations 1000000 4000000 152000000 [adjusted] root@zepto:/sys/class/misc/tpm0# cat device/enabled root@zepto:/sys/class/misc/tpm0# cat device/id IFX0102 PNP0c31 root@zepto:/sys/class/misc/tpm0# cat device/options root@zepto:/sys/class/misc/tpm0# cat device/owned root@zepto:/sys/class/misc/tpm0# cat device/pubek root@zepto:/sys/class/misc/tpm0# cat device/resources state = active mem 0xfed40000-0xfed44fff io 0x4e-0x4f io 0x1670-0x167f irq 11 root@zepto:/sys/class/misc/tpm0# cat device/temp_deactivated root@zepto:/sys/class/misc/tpm0# cat device/timeouts 752000 2000000 752000 752000 [adjusted] root@zepto:/sys/class/misc/tpm0# cat device/uevent DRIVER=tpm_tis
To be able to do the 'cat' above, I usually need to restart my computer, otherwise the files aren't there. That's probably after I've put the computer in sleep mode (which works if I add tpm_tis to the module blacklist). Perhaps the same problem is related to this one:
I just did a grep of my dmesg and saw some new error messages (28) in it. Perhaps they started occurring after I enabled it in BIOS.
root@zepto:/home/peter# dmesg | grep tpm_ [ 11.369198] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 11.508115] tpm_tis 00:08: Adjusting TPM timeout parameters. [ 32.560040] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 4320.577827] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 4320.636111] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts [ 4320.696081] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [ 4320.696091] tpm_tis 00:08: Could not get TPM timeouts and durations [ 9279.692915] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 9279.756184] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts [ 9279.822186] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [ 9279.822197] tpm_tis 00:08: Could not get TPM timeouts and durations [10968.845856] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [10968.904111] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts [10968.964100] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [10968.964111] tpm_tis 00:08: Could not get TPM timeouts and durations [13304.341746] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [13304.400093] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts [13304.464134] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [13304.464142] tpm_tis 00:08: Could not get TPM timeouts and durations
Thank you,
Peter A
Quoted 22 lines
Quoted 22 lines
Thanks,
PeterQuoted 19 lines
If you're seeing similar values, can you try the attached patch?
Thanks,
KentQuoted 14 lines
/Peter A
------------------------------------------------------------------------------
Own the Future-Intel® Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
tpmdd-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel
Quoted 131 lines · On Tue, Apr 23, 2013 at 04:30:53PM +0200, [email protected] wrote:
2013-04-11 23:41 skrev Kent Yoder:
Quoted 66 lines
Quoted 55 lines · On Sat, Apr 06, 2013 at 06:00:59PM +0200, [email protected] wrote:
2013-04-02 16:03 skrev Kent Yoder:
Quoted 11 lines
Hi Peter,
Quoted 8 lines · On Mon, Apr 1, 2013 at 4:17 PM, <[email protected]> wrote:
2013-03-28 14:12 skrev [email protected]:
Quoted 7 lines
What also might be worth a look - in your bugzilla it states:
[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16) [ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters. [ 10.084067] tpm_tis 00:0a: A TPM error (7) occurredattempting to
Quoted 18 lines
Quoted 18 lines
Quoted 5 lines
read a pcr
value[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)Quoted 9 lines
Can you perhaps try to enable your TPM in the BIOS? It's quite often
hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings.
If your system does not have bios support for TPMs, please tell me so
and I'll try to help you out.I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...
Quoted 8 lines
Quoted 8 lines
root@zepto:/home/peter# dmesg | grep tpm [ 14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 14.748276] tpm_tis 00:08: Adjusting TPM timeout parameters. [ 34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 root@zepto:/home/peter# tpm_version Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011(17),
Quoted 9 lines
Quoted 6 lines
Communication failure
root@zepto:/home/peter# tcsd -f TCSD TDDL ioctl: (25) Inappropriate ioctl for device TCSD TDDL Falling back to Read/Write device support. TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087Can you cat
/sys/class/misc/tpm0/device/timeouts? Ivan Pryvalov
reported that his TPM showed values that were too small to keepfrom
Quoted 1 line
causing timeouts waiting on TPM commands, but too big to
trigger the
Quoted 3 lines
driver's code to scale them. (He saw 12000 for the 3 timeout values.)
Quoted 8 lines
Hi Kent
The values I'm seeing are:
root@zepto:~# cat /sys/class/misc/tpm0/device/timeouts 752000 2000000 752000 752000 [adjusted]So I guess these are within a normal range?
Quoted 9 lines
Yes, these look normal. So it seems you can send commands to the
TPM
up until you try to suspend? Can you try to cat other files like/sys/class/misc/tpm0/device/pcrs? This is the simplest way to send some
command to the TPM...Kent
Hi Kent, I'm sorry I haven't replied to this message before. I must have missed it!
root@zepto:/sys/class/misc/tpm0# ll drwxr-xr-x 3 root root 0 Apr 23 16:20 ./ drwxr-xr-x 3 root root 0 Apr 23 16:20 ../ -r--r--r-- 1 root root 4096 Apr 23 16:26 dev lrwxrwxrwx 1 root root 0 Apr 23 16:26 device -> ../../../00:08/ drwxr-xr-x 2 root root 0 Apr 23 16:26 power/ lrwxrwxrwx 1 root root 0 Apr 23 16:20 subsystem -> ../../../../../class/misc/ -rw-r--r-- 1 root root 4096 Apr 23 16:20 ueventroot@zepto:/sys/class/misc/tpm0# cat dev 10:224 root@zepto:/sys/class/misc/tpm0# cat device/pcrs (prints nothing after a delay of a second or so) root@zepto:/sys/class/misc/tpm0# cat uevent MAJOR=10 MINOR=224 DEVNAME=tpm0 root@zepto:/sys/class/misc/tpm0# cat device/active root@zepto:/sys/class/misc/tpm0# cat device/cancel cat: device/cancel: Permission denied root@zepto:/sys/class/misc/tpm0# cat device/caps root@zepto:/sys/class/misc/tpm0# cat device/durations 1000000 4000000 152000000 [adjusted] root@zepto:/sys/class/misc/tpm0# cat device/enabled root@zepto:/sys/class/misc/tpm0# cat device/id IFX0102 PNP0c31 root@zepto:/sys/class/misc/tpm0# cat device/options root@zepto:/sys/class/misc/tpm0# cat device/owned root@zepto:/sys/class/misc/tpm0# cat device/pubek root@zepto:/sys/class/misc/tpm0# cat device/resources state = active mem 0xfed40000-0xfed44fff io 0x4e-0x4f io 0x1670-0x167f irq 11 root@zepto:/sys/class/misc/tpm0# cat device/temp_deactivated root@zepto:/sys/class/misc/tpm0# cat device/timeouts 752000 2000000 752000 752000 [adjusted] root@zepto:/sys/class/misc/tpm0# cat device/uevent DRIVER=tpm_tisTo be able to do the 'cat' above, I usually need to restart my computer, otherwise the files aren't there. That's probably after I've put the computer in sleep mode (which works if I add
tpm_tisto the module blacklist). Perhaps the same problem is related to this one:
I just did a grep of my dmesg and saw some new error messages (28) in it. Perhaps they started occurring after I enabled it in BIOS.
Quoted 7 lines
root@zepto:/home/peter# dmesg | grep tpm_ [ 11.369198] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 11.508115] tpm_tis 00:08: Adjusting TPM timeout parameters. [ 32.560040] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 4320.577827] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 4320.636111] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts
Your TPM failed its internal self test (rc=28). At this point it will
have gone shut down. Looks like your hardware is broken. :(
Kent
Quoted 48 lines
[ 4320.696081] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [ 4320.696091] tpm_tis 00:08: Could not get TPM timeouts and durations [ 9279.692915] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 9279.756184] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts [ 9279.822186] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [ 9279.822197] tpm_tis 00:08: Could not get TPM timeouts and durations [10968.845856] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [10968.904111] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts [10968.964100] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [10968.964111] tpm_tis 00:08: Could not get TPM timeouts and durations [13304.341746] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [13304.400093] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts [13304.464134] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [13304.464142] tpm_tis 00:08: Could not get TPM timeouts and durationsThank you,
Peter AQuoted 22 lines
Quoted 22 lines
Thanks,
PeterQuoted 19 lines
If you're seeing similar values, can you try the attached patch?
Thanks,
KentQuoted 14 lines
/Peter A
------------------------------------------------------------------------------
Own the Future-Intel® Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
tpmdd-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel
2013-04-23 16:43 skrev Kent Yoder:
Quoted 145 lines · On Tue, Apr 23, 2013 at 04:30:53PM +0200, [email protected] wrote:
Quoted 132 lines
2013-04-11 23:41 skrev Kent Yoder:
Quoted 20 lines
Quoted 18 lines · On Sat, Apr 06, 2013 at 06:00:59PM +0200, [email protected] wrote:
2013-04-02 16:03 skrev Kent Yoder:
Quoted 11 lines
Hi Peter,
Quoted 8 lines · On Mon, Apr 1, 2013 at 4:17 PM, <[email protected]> wrote:
2013-03-28 14:12 skrev [email protected]:
Quoted 7 lines
What also might be worth a look - in your bugzilla it states:
[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16) [ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters. [ 10.084067] tpm_tis 00:0a: A TPM error (7) occurredattempting to
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
read a pcr
value[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Can you perhaps try to enable your TPM in the BIOS? It's quite often
hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to accessthese
Quoted 42 lines
Quoted 33 lines
Quoted 9 lines
Quoted 9 lines
Quoted 5 lines
settings.
If your system does not have bios support for TPMs, please tell me so
and I'll try to help you out.I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...
Quoted 8 lines
Quoted 8 lines
root@zepto:/home/peter# dmesg | grep tpm [ 14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 14.748276] tpm_tis 00:08: Adjusting TPM timeout parameters. [ 34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 root@zepto:/home/peter# tpm_version Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011(17),
Quoted 9 lines
Quoted 6 lines
Communication failure
root@zepto:/home/peter# tcsd -f TCSD TDDL ioctl: (25) Inappropriate ioctl for device TCSD TDDL Falling back to Read/Write device support. TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087Can you cat
/sys/class/misc/tpm0/device/timeouts? Ivan Pryvalov
reported that his TPM showed values that were too small to keepfrom
Quoted 1 line
causing timeouts waiting on TPM commands, but too big to
trigger the
Quoted 3 lines
driver's code to scale them. (He saw 12000 for the 3 timeout values.)
Quoted 8 lines
Hi Kent
The values I'm seeing are:
root@zepto:~# cat /sys/class/misc/tpm0/device/timeouts 752000 2000000 752000 752000 [adjusted]So I guess these are within a normal range?
Quoted 9 lines
Yes, these look normal. So it seems you can send commands to the
TPM
up until you try to suspend? Can you try to cat other files like/sys/class/misc/tpm0/device/pcrs? This is the simplest way to send some
command to the TPM...Kent
Hi Kent, I'm sorry I haven't replied to this message before. I must have missed it!
root@zepto:/sys/class/misc/tpm0# ll drwxr-xr-x 3 root root 0 Apr 23 16:20 ./ drwxr-xr-x 3 root root 0 Apr 23 16:20 ../ -r--r--r-- 1 root root 4096 Apr 23 16:26 dev lrwxrwxrwx 1 root root 0 Apr 23 16:26 device -> ../../../00:08/ drwxr-xr-x 2 root root 0 Apr 23 16:26 power/ lrwxrwxrwx 1 root root 0 Apr 23 16:20 subsystem -> ../../../../../class/misc/ -rw-r--r-- 1 root root 4096 Apr 23 16:20 ueventroot@zepto:/sys/class/misc/tpm0# cat dev 10:224 root@zepto:/sys/class/misc/tpm0# cat device/pcrs (prints nothing after a delay of a second or so) root@zepto:/sys/class/misc/tpm0# cat uevent MAJOR=10 MINOR=224 DEVNAME=tpm0 root@zepto:/sys/class/misc/tpm0# cat device/active root@zepto:/sys/class/misc/tpm0# cat device/cancel cat: device/cancel: Permission denied root@zepto:/sys/class/misc/tpm0# cat device/caps root@zepto:/sys/class/misc/tpm0# cat device/durations 1000000 4000000 152000000 [adjusted] root@zepto:/sys/class/misc/tpm0# cat device/enabled root@zepto:/sys/class/misc/tpm0# cat device/id IFX0102 PNP0c31 root@zepto:/sys/class/misc/tpm0# cat device/options root@zepto:/sys/class/misc/tpm0# cat device/owned root@zepto:/sys/class/misc/tpm0# cat device/pubek root@zepto:/sys/class/misc/tpm0# cat device/resources state = active mem 0xfed40000-0xfed44fff io 0x4e-0x4f io 0x1670-0x167f irq 11 root@zepto:/sys/class/misc/tpm0# cat device/temp_deactivated root@zepto:/sys/class/misc/tpm0# cat device/timeouts 752000 2000000 752000 752000 [adjusted] root@zepto:/sys/class/misc/tpm0# cat device/uevent DRIVER=tpm_tisTo be able to do the 'cat' above, I usually need to restart my computer, otherwise the files aren't there. That's probably after I've put the computer in sleep mode (which works if I add
tpm_tisto the module blacklist). Perhaps the same problem is related to this one:
I just did a grep of my dmesg and saw some new error messages (28) in it. Perhaps they started occurring after I enabled it in BIOS.Quoted 7 lines
root@zepto:/home/peter# dmesg | grep tpm_ [ 11.369198] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 11.508115] tpm_tis 00:08: Adjusting TPM timeout parameters. [ 32.560040] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 4320.577827] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 4320.636111] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeoutsYour TPM failed its internal self test (rc=28). At this point it
will
have gone shut down. Looks like your hardware is broken. :(
Quoted 1 line
Kent
But this only seems to happen after the tpm module has been unloaded when going to sleep. I don't get these messages after a reboot:
root@zepto:/sys/class/misc/tpm0# dmesg | grep tpm [ 12.068202] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 12.212122] tpm_tis 00:08: Adjusting TPM timeout parameters. [ 33.068050] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 434.500088] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 485.180079] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 511.436081] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 523.412084] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 535.396083] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 550.316068] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 559.164074] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 570.028078] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
/Peter
Quoted 50 lines
Quoted 50 lines
[ 4320.696081] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [ 4320.696091] tpm_tis 00:08: Could not get TPM timeouts and durations [ 9279.692915] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 9279.756184] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts [ 9279.822186] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [ 9279.822197] tpm_tis 00:08: Could not get TPM timeouts and durations [10968.845856] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [10968.904111] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts [10968.964100] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [10968.964111] tpm_tis 00:08: Could not get TPM timeouts and durations [13304.341746] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [13304.400093] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts [13304.464134] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [13304.464142] tpm_tis 00:08: Could not get TPM timeouts and durationsThank you,
Peter AQuoted 23 lines
Quoted 23 lines
Thanks,
PeterQuoted 20 lines
If you're seeing similar values, can you try the attached patch?
Thanks,
KentQuoted 15 lines
/Peter A
------------------------------------------------------------------------------
Own the Future-Intel® Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
tpmdd-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel
Quoted 135 lines · On Tue, Apr 23, 2013 at 10:03 AM, <[email protected]> wrote:
2013-04-23 16:43 skrev Kent Yoder:
Quoted 133 lines · On Tue, Apr 23, 2013 at 04:30:53PM +0200, [email protected] wrote:
Quoted 132 lines
2013-04-11 23:41 skrev Kent Yoder:
Quoted 66 lines
Quoted 55 lines · On Sat, Apr 06, 2013 at 06:00:59PM +0200, [email protected] wrote:
2013-04-02 16:03 skrev Kent Yoder:
Quoted 11 lines
Hi Peter,
Quoted 8 lines · On Mon, Apr 1, 2013 at 4:17 PM, <[email protected]> wrote:
2013-03-28 14:12 skrev [email protected]:
Quoted 7 lines
What also might be worth a look - in your bugzilla it states:
[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16) [ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters. [ 10.084067] tpm_tis 00:0a: A TPM error (7) occurredattempting to
Quoted 18 lines
Quoted 18 lines
Quoted 5 lines
read a pcr
value[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)Quoted 9 lines
Can you perhaps try to enable your TPM in the BIOS? It's quite often
hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings.
If your system does not have bios support for TPMs, please tell me so
and I'll try to help you out.I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...
Quoted 8 lines
Quoted 8 lines
root@zepto:/home/peter# dmesg | grep tpm [ 14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 14.748276] tpm_tis 00:08: Adjusting TPM timeout parameters. [ 34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 root@zepto:/home/peter# tpm_version Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011(17),
Quoted 9 lines
Quoted 6 lines
Communication failure
root@zepto:/home/peter# tcsd -f TCSD TDDL ioctl: (25) Inappropriate ioctl for device TCSD TDDL Falling back to Read/Write device support. TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087Can you cat
/sys/class/misc/tpm0/device/timeouts? Ivan Pryvalov
reported that his TPM showed values that were too small to keepfrom
Quoted 1 line
causing timeouts waiting on TPM commands, but too big to
trigger the
Quoted 3 lines
driver's code to scale them. (He saw 12000 for the 3 timeout values.)
Quoted 8 lines
Hi Kent
The values I'm seeing are:
root@zepto:~# cat /sys/class/misc/tpm0/device/timeouts 752000 2000000 752000 752000 [adjusted]So I guess these are within a normal range?
Quoted 9 lines
Yes, these look normal. So it seems you can send commands to the
TPM
up until you try to suspend? Can you try to cat other files like/sys/class/misc/tpm0/device/pcrs? This is the simplest way to send some
command to the TPM...Kent
Hi Kent, I'm sorry I haven't replied to this message before. I must have missed it!
root@zepto:/sys/class/misc/tpm0# ll drwxr-xr-x 3 root root 0 Apr 23 16:20 ./ drwxr-xr-x 3 root root 0 Apr 23 16:20 ../ -r--r--r-- 1 root root 4096 Apr 23 16:26 dev lrwxrwxrwx 1 root root 0 Apr 23 16:26 device -> ../../../00:08/ drwxr-xr-x 2 root root 0 Apr 23 16:26 power/ lrwxrwxrwx 1 root root 0 Apr 23 16:20 subsystem -> ../../../../../class/misc/ -rw-r--r-- 1 root root 4096 Apr 23 16:20 ueventroot@zepto:/sys/class/misc/tpm0# cat dev 10:224 root@zepto:/sys/class/misc/tpm0# cat device/pcrs (prints nothing after a delay of a second or so) root@zepto:/sys/class/misc/tpm0# cat uevent MAJOR=10 MINOR=224 DEVNAME=tpm0 root@zepto:/sys/class/misc/tpm0# cat device/active root@zepto:/sys/class/misc/tpm0# cat device/cancel cat: device/cancel: Permission denied root@zepto:/sys/class/misc/tpm0# cat device/caps root@zepto:/sys/class/misc/tpm0# cat device/durations 1000000 4000000 152000000 [adjusted] root@zepto:/sys/class/misc/tpm0# cat device/enabled root@zepto:/sys/class/misc/tpm0# cat device/id IFX0102 PNP0c31 root@zepto:/sys/class/misc/tpm0# cat device/options root@zepto:/sys/class/misc/tpm0# cat device/owned root@zepto:/sys/class/misc/tpm0# cat device/pubek root@zepto:/sys/class/misc/tpm0# cat device/resources state = active mem 0xfed40000-0xfed44fff io 0x4e-0x4f io 0x1670-0x167f irq 11 root@zepto:/sys/class/misc/tpm0# cat device/temp_deactivated root@zepto:/sys/class/misc/tpm0# cat device/timeouts 752000 2000000 752000 752000 [adjusted] root@zepto:/sys/class/misc/tpm0# cat device/uevent DRIVER=tpm_tisTo be able to do the 'cat' above, I usually need to restart my computer, otherwise the files aren't there. That's probably after I've put the computer in sleep mode (which works if I add
tpm_tisto the module blacklist). Perhaps the same problem is related to this one:
I just did a grep of my dmesg and saw some new error messages (28) in it. Perhaps they started occurring after I enabled it in BIOS.
Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
root@zepto:/home/peter# dmesg | grep tpm_ [ 11.369198] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 11.508115] tpm_tis 00:08: Adjusting TPM timeout parameters. [ 32.560040] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 4320.577827] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 4320.636111] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts
So the above messages happen at the time you reinsert the module
after a resume?
Kent
Quoted 68 lines
But this only seems to happen after the tpm module has been unloaded when going to sleep. I don't get these messages after a reboot:
root@zepto:/sys/class/misc/tpm0# dmesg | grep tpm [ 12.068202] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 12.212122] tpm_tis 00:08: Adjusting TPM timeout parameters. [ 33.068050] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 434.500088] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 485.180079] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 511.436081] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 523.412084] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 535.396083] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 550.316068] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 559.164074] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 570.028078] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 /PeterQuoted 51 lines
Quoted 51 lines
[ 4320.696081] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [ 4320.696091] tpm_tis 00:08: Could not get TPM timeouts and durations [ 9279.692915] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 9279.756184] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts [ 9279.822186] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [ 9279.822197] tpm_tis 00:08: Could not get TPM timeouts and durations [10968.845856] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [10968.904111] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts [10968.964100] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [10968.964111] tpm_tis 00:08: Could not get TPM timeouts and durations [13304.341746] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [13304.400093] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts [13304.464134] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [13304.464142] tpm_tis 00:08: Could not get TPM timeouts and durationsThank you,
Peter AQuoted 24 lines
Quoted 24 lines
Thanks,
PeterQuoted 21 lines
If you're seeing similar values, can you try the attached patch?
Thanks,
KentQuoted 16 lines
/Peter A
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
------------------------------------------------------------------------------
Own the Future-Intel® Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
tpmdd-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel
2013-04-23 18:29 skrev Kent Yoder:
Quoted 159 lines · On Tue, Apr 23, 2013 at 10:03 AM, <[email protected]> wrote:
Quoted 147 lines
2013-04-23 16:43 skrev Kent Yoder:
Quoted 145 lines · On Tue, Apr 23, 2013 at 04:30:53PM +0200, [email protected] wrote:
Quoted 144 lines
2013-04-11 23:41 skrev Kent Yoder:
Quoted 6 lines
Quoted 4 lines · On Sat, Apr 06, 2013 at 06:00:59PM +0200, [email protected] wrote:
2013-04-02 16:03 skrev Kent Yoder:
Quoted 3 lines
Hi Peter,
On Mon, Apr 1, 2013 at 4:17 PM, <[email protected]>
Quoted 8 lines · wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
2013-03-28 14:12 skrev [email protected]:
Quoted 7 lines
What also might be worth a look - in your bugzilla it states:
[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16) [ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters. [ 10.084067] tpm_tis 00:0a: A TPM error (7) occurredQuoted 7 lines
Quoted 7 lines
attempting to
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
read a pcr
value[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)Can you perhaps try to enable your TPM in the BIOS? It's
quite
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
often
hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to accessthese
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 5 lines
settings.
If your system does not have bios support for TPMs, please tell me so
and I'll try to help you out.I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...
root@zepto:/home/peter# dmesg | grep tpm [ 14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id16)
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
[ 14.748276] tpm_tis 00:08: Adjusting TPM timeoutparameters.
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
[ 34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error-62
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
[ 125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error-62
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
[ 212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error-62
Quoted 8 lines
Quoted 8 lines
Quoted 2 lines
Quoted 2 lines
root@zepto:/home/peter# tpm_version Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011(17),
Quoted 5 lines
Quoted 5 lines
Communication failure
root@zepto:/home/peter# tcsd -f TCSD TDDL ioctl: (25) Inappropriate ioctl for device TCSD TDDL Falling back to Read/Write device support. TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timerexpired
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
TCSD TCS ERROR: TCS GetCapability failed with result =
0x1087Can you cat
/sys/class/misc/tpm0/device/timeouts? IvanPryvalov
Quoted 9 lines
Quoted 9 lines
Quoted 1 line
reported that his TPM showed values that were too small to keep
from
Quoted 1 line
causing timeouts waiting on TPM commands, but too big to
trigger the
Quoted 3 lines
driver's code to scale them. (He saw 12000 for the 3 timeout values.)
Hi Kent
Quoted 8 lines
Quoted 6 lines
The values I'm seeing are:
root@zepto:~# cat /sys/class/misc/tpm0/device/timeouts 752000 2000000 752000 752000 [adjusted]So I guess these are within a normal range?
Yes, these look normal. So it seems you can send commands to
the
Quoted 3 lines
TPM
up until you try to suspend? Can you try to cat other files like/sys/class/misc/tpm0/device/pcrs? This is the simplest way tosend
Quoted 5 lines
some
command to the TPM...Kent
Hi Kent, I'm sorry I haven't replied to this message before. I must have missed it!
root@zepto:/sys/class/misc/tpm0# ll drwxr-xr-x 3 root root 0 Apr 23 16:20 ./ drwxr-xr-x 3 root root 0 Apr 23 16:20 ../ -r--r--r-- 1 root root 4096 Apr 23 16:26 dev lrwxrwxrwx 1 root root 0 Apr 23 16:26 device -> ../../../00:08/ drwxr-xr-x 2 root root 0 Apr 23 16:26 power/ lrwxrwxrwx 1 root root 0 Apr 23 16:20 subsystem -> ../../../../../class/misc/ -rw-r--r-- 1 root root 4096 Apr 23 16:20 ueventroot@zepto:/sys/class/misc/tpm0# cat dev 10:224 root@zepto:/sys/class/misc/tpm0# cat device/pcrs (prints nothing after a delay of a second or so) root@zepto:/sys/class/misc/tpm0# cat uevent MAJOR=10 MINOR=224 DEVNAME=tpm0 root@zepto:/sys/class/misc/tpm0# cat device/active root@zepto:/sys/class/misc/tpm0# cat device/cancel cat: device/cancel: Permission denied root@zepto:/sys/class/misc/tpm0# cat device/caps root@zepto:/sys/class/misc/tpm0# cat device/durations 1000000 4000000 152000000 [adjusted] root@zepto:/sys/class/misc/tpm0# cat device/enabled root@zepto:/sys/class/misc/tpm0# cat device/id IFX0102 PNP0c31 root@zepto:/sys/class/misc/tpm0# cat device/options root@zepto:/sys/class/misc/tpm0# cat device/owned root@zepto:/sys/class/misc/tpm0# cat device/pubek root@zepto:/sys/class/misc/tpm0# cat device/resources state = active mem 0xfed40000-0xfed44fff io 0x4e-0x4f io 0x1670-0x167f irq 11 root@zepto:/sys/class/misc/tpm0# cat device/temp_deactivated root@zepto:/sys/class/misc/tpm0# cat device/timeouts 752000 2000000 752000 752000 [adjusted] root@zepto:/sys/class/misc/tpm0# cat device/uevent DRIVER=tpm_tisTo be able to do the 'cat' above, I usually need to restart my computer, otherwise the files aren't there. That's probably after I've put the computer in sleep mode (which works if I add
tpm_tisto the module blacklist). Perhaps the same problem is related to this one:
I just did a grep of my dmesg and saw some new error messages (28) in it. Perhaps they started occurring after I enabled it in BIOS.Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
root@zepto:/home/peter# dmesg | grep tpm_ [ 11.369198] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 11.508115] tpm_tis 00:08: Adjusting TPM timeout parameters. [ 32.560040] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 4320.577827] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 4320.636111] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeoutsSo the above messages happen at the time you reinsert the module
after a resume?
Quoted 1 line
Kent
Sadly I don't know. Reinserting the module after a resume doesn't really seem to do much, for instance it doesn't recreate the directories I listed/cat above.
But since one of the messages is after 4320 (seconds?) I guess it must be something like that. But I didn't see them when I tried modprobing the module several times, to get the directories in /sys/ back.
/Peter
Quoted 72 lines
Quoted 72 lines
But this only seems to happen after the tpm module has been unloaded when going to sleep. I don't get these messages after a reboot:
root@zepto:/sys/class/misc/tpm0# dmesg | grep tpm [ 12.068202] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 12.212122] tpm_tis 00:08: Adjusting TPM timeout parameters. [ 33.068050] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 434.500088] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 485.180079] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 511.436081] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 523.412084] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 535.396083] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 550.316068] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 559.164074] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 [ 570.028078] tpm_tis 00:08: tpm_transmit: tpm_send: error -62 /PeterQuoted 54 lines
Quoted 54 lines
[ 4320.696081] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [ 4320.696091] tpm_tis 00:08: Could not get TPM timeouts and durations [ 9279.692915] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [ 9279.756184] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts [ 9279.822186] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [ 9279.822197] tpm_tis 00:08: Could not get TPM timeouts and durations [10968.845856] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [10968.904111] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts [10968.964100] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [10968.964111] tpm_tis 00:08: Could not get TPM timeouts and durations [13304.341746] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) [13304.400093] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts [13304.464134] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations [13304.464142] tpm_tis 00:08: Could not get TPM timeouts and durationsThank you,
Peter AQuoted 4 lines
Quoted 4 lines
Thanks,
PeterQuoted 1 line
If you're seeing similar values, can you try the attached
patch?
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Thanks,
KentQuoted 7 lines
/Peter A
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
------------------------------------------------------------------------------
Own the Future-Intel® Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13.http://p.sf.net/sfu/intel_levelupd2d
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
_______________________________________________
tpmdd-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel