Skip to contentSkip to conversation

tpm_tis driver failed to suspend, error -62

DISCUSSION Aaron Lu 7 participants 19 messages Mar 19, 2013 – Apr 29, 2013 1 message not in the archive TPM device driver

lore
Share & tools
lore

Aaron Lu

author
#0 lore raw

Hi Rajiv,

Not sure if I should send this to you, please kindly forward it to the appropriate person if not, thanks.

Peter has encountered a problem during suspend, the tpm_tis driver's suspend callback will fail, the relevant message is:

[  192.281757] PM: Syncing filesystems ... done.
[  192.692479] Freezing user space processes ... (elapsed 0.01 seconds)
done.
[  192.708159] Freezing remaining freezable tasks ... (elapsed 0.01
seconds)
done.
[  192.724151] Suspending console(s) (use no_console_suspend to debug)
[  192.724612] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[  192.724785] sd 2:0:0:0: [sda] Stopping disk
[  197.512047] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  197.512055] legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62
[  197.512057] PM: Device 00:08 failed to suspend: error -62
[  197.512058] PM: Some devices failed to suspend

And the problem has been there since v2.6.32(shipped in ubuntu 10.04), and the latest upstream tree(v3.9-rcx) also has this problem. The bug link is here:
https://bugzilla.kernel.org/show_bug.cgi?id=45761

Please feel free to ask for more information, thanks.

-Aaron

#1 lore raw

Error 62 is ETIME. The driver is timing out during a tpm_send, possibly trying to send the Tpm_SaveState command.

It may be that you cannot talk to the TPM at all. Have you tried sending messages to the TPM before suspending?

Are there any other tpm entries in the syslog? Like at boot?

What model TPM is it?

Quoted 41 lines · Aaron Lu

Hi Rajiv,

Not sure if I should send this to you, please kindly forward it to the appropriate person if not, thanks.

Peter has encountered a problem during suspend, the tpm_tis driver's suspend callback will fail, the relevant message is:

[  192.281757] PM: Syncing filesystems ... done.
[  192.692479] Freezing user space processes ... (elapsed 0.01 seconds)
done.
[  192.708159] Freezing remaining freezable tasks ... (elapsed 0.01
seconds)
done.
[  192.724151] Suspending console(s) (use no_console_suspend to debug)
[  192.724612] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[  192.724785] sd 2:0:0:0: [sda] Stopping disk
[  197.512047] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  197.512055] legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62
[  197.512057] PM: Device 00:08 failed to suspend: error -62
[  197.512058] PM: Some devices failed to suspend

And the problem has been there since v2.6.32(shipped in ubuntu 10.04), and the latest upstream tree(v3.9-rcx) also has this problem. The bug link is here:
https://bugzilla.kernel.org/show_bug.cgi?id=45761

Please feel free to ask for more information, thanks.

-Aaron

------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_mar
_______________________________________________
tpmdd-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel

#2 lore raw

Hi! Sadly, I have to say that I'm totally oblivious to power-related stuff both in software and hardware, so I have no idea what you are asking or proposing.. :)

I don't know if you have access to the files I've included in the bug report, so here are the links to them:
https://launchpadlibrarian.net/105830773/lspci.txt
https://launchpadlibrarian.net/95994294/AcpiTables.txt
https://launchpadlibrarian.net/95994318/BootDmesg.txt
https://launchpadlibrarian.net/95994354/UdevDb.txt

Regarding the syslog during boot, is that the same as the BootDmesg I've attached? Or should I search in another log file? I'm not sure about the model, but I was hoping you could deduct something from the UdevDb or the lspci output above.

BR,
Peter

2013-03-19 16:50 skrev Luigi Semenzato:

Quoted 55 lines

Error 62 is ETIME. The driver is timing out during a tpm_send, possibly trying to send the Tpm_SaveState command.

It may be that you cannot talk to the TPM at all. Have you tried sending messages to the TPM before suspending?

Are there any other tpm entries in the syslog? Like at boot?

What model TPM is it?

Quoted 43 lines · Aaron Lu

Hi Rajiv,

Not sure if I should send this to you, please kindly forward it to the appropriate person if not, thanks.

Peter has encountered a problem during suspend, the tpm_tis driver's suspend callback will fail, the relevant message is:

[  192.281757] PM: Syncing filesystems ... done.
[  192.692479] Freezing user space processes ... (elapsed 0.01 seconds)
done.
[  192.708159] Freezing remaining freezable tasks ... (elapsed 0.01
seconds)
done.
[  192.724151] Suspending console(s) (use no_console_suspend to debug)
[  192.724612] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[  192.724785] sd 2:0:0:0: [sda] Stopping disk
[  197.512047] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  197.512055] legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns 
-62
[  197.512057] PM: Device 00:08 failed to suspend: error -62
[  197.512058] PM: Some devices failed to suspend

And the problem has been there since v2.6.32(shipped in ubuntu 10.04), and the latest upstream tree(v3.9-rcx) also has this problem. The bug link is here:
https://bugzilla.kernel.org/show_bug.cgi?id=45761

Please feel free to ask for more information, thanks.

-Aaron

------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_mar
_______________________________________________
tpmdd-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel

#4 lore raw
In reply to a message not in the archive

Sending again, plain text.

---

Hey Aaron,

Sorry for the delay. Can you send us the dmesg output after setting loglevel=7 at boot time? Additionally, can you send us the TPM manufacturer model/version?

# cat /sys/devices/pnp0/00\:0*/caps

Adding Kent.

Cheers,
Rajiv

Quoted 95 lines · Rajiv Andrade

Hey Aaron,

Sorry for the delay. Can you send us the dmesg output after setting loglevel=7 at boot time? Additionally, can you send us the TPM manufacturer model/version?

# cat /sys/devices/pnp0/00\:0*/caps

Adding Kent.

Cheers,
Rajiv

Quoted 78 lines · On Thu, Mar 21, 2013 at 10:17 AM, <[email protected]> wrote:

Hi! Sadly, I have to say that I'm totally oblivious to power-related stuff both in software and hardware, so I have no idea what you are asking or proposing.. :)

I don't know if you have access to the files I've included in the bug report, so here are the links to them:
https://launchpadlibrarian.net/105830773/lspci.txt
https://launchpadlibrarian.net/95994294/AcpiTables.txt
https://launchpadlibrarian.net/95994318/BootDmesg.txt
https://launchpadlibrarian.net/95994354/UdevDb.txt

Regarding the syslog during boot, is that the same as the BootDmesg I've attached? Or should I search in another log file?
I'm not sure about the model, but I was hoping you could deduct something from the UdevDb or the lspci output above.

BR,
Peter

2013-03-19 16:50 skrev Luigi Semenzato:

Quoted 56 lines

Error 62 is ETIME. The driver is timing out during a tpm_send, possibly trying to send the Tpm_SaveState command.

It may be that you cannot talk to the TPM at all. Have you tried sending messages to the TPM before suspending?

Are there any other tpm entries in the syslog? Like at boot?

What model TPM is it?

Quoted 44 lines · Aaron Lu

Hi Rajiv,

Not sure if I should send this to you, please kindly forward it to the appropriate person if not, thanks.

Peter has encountered a problem during suspend, the tpm_tis driver's suspend callback will fail, the relevant message is:

[  192.281757] PM: Syncing filesystems ... done.
[  192.692479] Freezing user space processes ... (elapsed 0.01 seconds)
done.
[  192.708159] Freezing remaining freezable tasks ... (elapsed 0.01
seconds)
done.
[  192.724151] Suspending console(s) (use no_console_suspend to debug)
[  192.724612] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[  192.724785] sd 2:0:0:0: [sda] Stopping disk
[  197.512047] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  197.512055] legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62
[  197.512057] PM: Device 00:08 failed to suspend: error -62
[  197.512058] PM: Some devices failed to suspend

And the problem has been there since v2.6.32(shipped in ubuntu 10.04), and the latest upstream tree(v3.9-rcx) also has this problem. The bug link is here:
https://bugzilla.kernel.org/show_bug.cgi?id=45761

Please feel free to ask for more information, thanks.

-Aaron

------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_mar
_______________________________________________
tpmdd-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel

author
#5 lore raw
Quoted 9 lines · Rajiv Andrade

Hey Aaron,

Sorry for the delay. Can you send us the dmesg output after setting loglevel=7 at boot time? Additionally, can you send us the TPM manufacturer model/version?

# cat /sys/devices/pnp0/00\:0*/caps

Adding Kent.

Thanks Rajiv.

Peter,
Please kindly provide the required information, thanks.

-Aaron

Quoted 100 lines

Cheers,
Rajiv

Quoted 95 lines · Rajiv Andrade

Hey Aaron,

Sorry for the delay. Can you send us the dmesg output after setting loglevel=7 at boot time? Additionally, can you send us the TPM manufacturer model/version?

# cat /sys/devices/pnp0/00\:0*/caps

Adding Kent.

Cheers,
Rajiv

Quoted 78 lines · On Thu, Mar 21, 2013 at 10:17 AM, <[email protected]> wrote:

Hi! Sadly, I have to say that I'm totally oblivious to power-related stuff both in software and hardware, so I have no idea what you are asking or proposing.. :)

I don't know if you have access to the files I've included in the bug report, so here are the links to them:
https://launchpadlibrarian.net/105830773/lspci.txt
https://launchpadlibrarian.net/95994294/AcpiTables.txt
https://launchpadlibrarian.net/95994318/BootDmesg.txt
https://launchpadlibrarian.net/95994354/UdevDb.txt

Regarding the syslog during boot, is that the same as the BootDmesg I've attached? Or should I search in another log file?
I'm not sure about the model, but I was hoping you could deduct something from the UdevDb or the lspci output above.

BR,
Peter

2013-03-19 16:50 skrev Luigi Semenzato:

Quoted 56 lines

Error 62 is ETIME. The driver is timing out during a tpm_send, possibly trying to send the Tpm_SaveState command.

It may be that you cannot talk to the TPM at all. Have you tried sending messages to the TPM before suspending?

Are there any other tpm entries in the syslog? Like at boot?

What model TPM is it?

Quoted 44 lines · Aaron Lu

Hi Rajiv,

Not sure if I should send this to you, please kindly forward it to the appropriate person if not, thanks.

Peter has encountered a problem during suspend, the tpm_tis driver's suspend callback will fail, the relevant message is:

[  192.281757] PM: Syncing filesystems ... done.
[  192.692479] Freezing user space processes ... (elapsed 0.01 seconds)
done.
[  192.708159] Freezing remaining freezable tasks ... (elapsed 0.01
seconds)
done.
[  192.724151] Suspending console(s) (use no_console_suspend to debug)
[  192.724612] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[  192.724785] sd 2:0:0:0: [sda] Stopping disk
[  197.512047] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  197.512055] legacy_suspend(): pnp_bus_suspend+0x0/0xa0 returns -62
[  197.512057] PM: Device 00:08 failed to suspend: error -62
[  197.512058] PM: Some devices failed to suspend

And the problem has been there since v2.6.32(shipped in ubuntu 10.04), and the latest upstream tree(v3.9-rcx) also has this problem. The bug link is here:
https://bugzilla.kernel.org/show_bug.cgi?id=45761

Please feel free to ask for more information, thanks.

-Aaron

------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_mar
_______________________________________________
tpmdd-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel

#6 lore raw

Hi Aaron, Rajob, PeterA and everybody else,

(sorry for the late reply)

Quoted 9 lines · Rajiv Andrade
Quoted 8 lines

Sorry for the delay. Can you send us the dmesg output after setting loglevel=7 at boot time? Additionally, can you send us the TPM manufacturer model/version

Quoted 5 lines · On Thu, Mar 21, 2013 at 10:17 AM, <[email protected]> wrote:
Quoted 4 lines

Hi! Sadly, I have to say that I'm totally oblivious to power-related stuff both in software and hardware, so I have no idea what you are asking or proposing.. :

According to the BootDmesg.txt it's an Infineon TPM

[    0.293936] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[   12.413651] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)

@PeterA:
Can you perhaps try find out the exact tpm version?
1) Install trousers and tpm_tools (emerge app-crypt/trousers app-crypt/tpm-tools)
2) Kill the tcsd and run it in the foreground

# pkill -9 tcsd
# tcsd -f
(if it says up and running you can send it to background)
3) Run 
#tpm_version and post the output.

Also the flags etc would perhaps be handy, they can be retrieved via sysfs - on you machine it _should_ be

# cat /sys/devices/pnp0/00:0a/*
and also post the output.

What also might be worth a look - in your bugzilla it states:

[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters.
[ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attempting to read a pcr
value
[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)

Can you perhaps try to enable your TPM in the BIOS? It's quite often hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings.
If your system does not have bios support for TPMs, please tell me so and I'll try to help you out.

Thanks,
PeterH

#7 lore raw

Hi Peter!

Thank you for your help! I'm going away for the Easter holiday, and will be back on Monday/Tuesday. I will try to supply the information you need at that time, since I won't be bringing my laptop with me.

BR
Peter A

2013-03-28 14:12 skrev [email protected]:

Quoted 58 lines

Hi Aaron, Rajob, PeterA and everybody else,

(sorry for the late reply)

Quoted 9 lines · Rajiv Andrade
Quoted 8 lines

Sorry for the delay. Can you send us the dmesg output after setting loglevel=7 at boot time? Additionally, can you send us the TPM manufacturer model/version

Quoted 5 lines · On Thu, Mar 21, 2013 at 10:17 AM, <[email protected]> wrote:
Quoted 4 lines

Hi! Sadly, I have to say that I'm totally oblivious to power-related stuff both in software and hardware, so I have no idea what you are asking or proposing.. :

According to the BootDmesg.txt it's an Infineon TPM

[    0.293936] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102
PNP0c31 (active)
[   12.413651] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)

@PeterA:
Can you perhaps try find out the exact tpm version?
1) Install trousers and tpm_tools (emerge app-crypt/trousers app-crypt/tpm-tools)
2) Kill the tcsd and run it in the foreground

# pkill -9 tcsd
# tcsd -f
(if it says up and running you can send it to background)
3) Run
#tpm_version and post the output.

Also the flags etc would perhaps be handy, they can be retrieved via sysfs - on you machine it _should_ be

# cat /sys/devices/pnp0/00:0a/*
and also post the output.

What also might be worth a look - in your bugzilla it states:

[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters.
[ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attempting to read a pcr
value
[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)

Can you perhaps try to enable your TPM in the BIOS? It's quite often hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings. If your system does not have bios support for TPMs, please tell me so and I'll try to help you out.

Thanks,
PeterH

#8 lore raw
In reply to [email protected]

2013-03-28 14:12 skrev [email protected]:

Quoted 10 lines

Hi Aaron, Rajob, PeterA and everybody else

@PeterA:
Can you perhaps try find out the exact tpm version?
1) Install trousers and tpm_tools (emerge app-crypt/trousers app-crypt/tpm-tools)
2) Kill the tcsd and run it in the foreground

# pkill -9 tcsd
# tcsd -f
(if it says up and running you can send it to background)
root@zepto:/home/peter# tcsd -f
TCSD TDDL ioctl: (25) Inappropriate ioctl for device
TCSD TDDL Falling back to Read/Write device support.
TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired
TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087
Quoted 2 lines

3) Run
#tpm_version and post the output.

root@zepto:/home/peter# tpm_version
Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011 (17), Communication failure

I will try to restart the laptop, as well as check the bios settings, and get back to you on this one.

Quoted 6 lines

Also the flags etc would perhaps be handy, they can be retrieved via sysfs - on you machine it _should_ be

# cat /sys/devices/pnp0/00:0a/*
and also post the output.
root@zepto:/home/peter# ls /sys/devices/pnp0/00\:0a/
driver/        id             power/         subsystem/
firmware_node/ options        resources      uevent
root@zepto:/home/peter# cat /sys/devices/pnp0/00\:0a/options
root@zepto:/home/peter# cat /sys/devices/pnp0/00\:0a/resources
state = active
irq 12
root@zepto:/home/peter# cat /sys/devices/pnp0/00\:0a/id
SYN1902
SYN1900
SYN0002
PNP0f13
root@zepto:/home/peter# cat /sys/devices/pnp0/00\:0a/uevent
DRIVER=i8042 aux

Cheers,
Peter A

Quoted 19 lines

What also might be worth a look - in your bugzilla it states:

[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters.
[ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attempting to read a pcr
value
[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)

Can you perhaps try to enable your TPM in the BIOS? It's quite often hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings. If your system does not have bios support for TPMs, please tell me so and I'll try to help you out.

Thanks,
PeterH

maintainer
#9 lore raw

Hi Peter,

Quoted 6 lines
Quoted 4 lines

Also the flags etc would perhaps be handy, they can be retrieved via sysfs - on you machine it _should_ be

# cat /sys/devices/pnp0/00:0a/*
and also post the output.
root@zepto:/home/peter# ls /sys/devices/pnp0/00\:0a/

Okay it seems it's not 00:0a ;/

Can you check the node in dmesg again?
You can try to find it also by
find /sys -name '*duration*'

Thanks,
Peter

#11 lore raw
In reply to [email protected]

2013-03-28 14:12 skrev [email protected]:

Quoted 9 lines

What also might be worth a look - in your bugzilla it states:

[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters.
[ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attempting to read a pcr
value
[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
Quoted 6 lines

Can you perhaps try to enable your TPM in the BIOS? It's quite often hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings. If your system does not have bios support for TPMs, please tell me so and I'll try to help you out.

I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...

root@zepto:/home/peter# dmesg | grep tpm
[   14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[   14.748276] tpm_tis 00:08: Adjusting TPM timeout parameters.
[   34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
root@zepto:/home/peter# tpm_version
Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011 (17), Communication failure
root@zepto:/home/peter# tcsd -f
TCSD TDDL ioctl: (25) Inappropriate ioctl for device
TCSD TDDL Falling back to Read/Write device support.
TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired
TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087

/Peter A

#12 lore raw

Hi Peter,

Quoted 23 lines · On Mon, Apr 1, 2013 at 4:17 PM, <[email protected]> wrote:

2013-03-28 14:12 skrev [email protected]:

Quoted 11 lines

What also might be worth a look - in your bugzilla it states:

[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31
(active)
[ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters.
[ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attempting to
read a pcr
value
[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
Quoted 7 lines

Can you perhaps try to enable your TPM in the BIOS? It's quite often hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings.
If your system does not have bios support for TPMs, please tell me so and I'll try to help you out.

I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...

Quoted 14 lines
root@zepto:/home/peter# dmesg | grep tpm
[   14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[   14.748276] tpm_tis 00:08: Adjusting TPM timeout parameters.
[   34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
root@zepto:/home/peter# tpm_version
Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011 (17),
Communication failure
root@zepto:/home/peter# tcsd -f
TCSD TDDL ioctl: (25) Inappropriate ioctl for device
TCSD TDDL Falling back to Read/Write device support.
TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired
TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087

Can you cat /sys/class/misc/tpm0/device/timeouts? Ivan Pryvalov
reported that his TPM showed values that were too small to keep from causing timeouts waiting on TPM commands, but too big to trigger the driver's code to scale them. (He saw 12000 for the 3 timeout values.)

If you're seeing similar values, can you try the attached patch?

Thanks,
Kent

Quoted 12 lines

/Peter A

------------------------------------------------------------------------------
Own the Future-Intel&reg; Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
tpmdd-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel

commit 31811c388aa29a9a94a68f19112773386daf3db9

Author: Kent Yoder <[email protected]>
Date:   Tue Mar 26 13:41:49 2013 -0500

test commit for ivan

drivers/char/tpm/tpm.c +3 -0
index ad7c732..b52e1be 100644
@@ -563,6 +563,9 @@ int tpm_get_timeouts(struct tpm_chip *chip)
 		/* timeouts in msec rather usec */
 		scale = 1000;
 		chip->vendor.timeout_adjusted = true;
+	} else if (timeout && timeout < 20000) {
+		scale = 100;
+		chip->vendor.timeout_adjusted = true;
 	}
 	if (timeout)
 		chip->vendor.timeout_a = usecs_to_jiffies(timeout * scale);
#10 lore raw
In reply to Peter Hüwe

2013-04-01 23:12 skrev Peter Hüwe:

Hi Peter,

Also the flags etc would perhaps be handy, they can be
retrieved

via

sysfs - on you machine it _should_ be # cat
/sys/devices/pnp0/00:0a/* and also post the output.

        root@zepto:/home/peter# ls /sys/devices/pnp0/00\:0a/

Okay it seems it's not 00:0a ;/ Can you check the node in dmesg
again? You can try to find it also by find /sys -name '*duration*'

root@zepto:/home/peter# find /sys -name '*duration*'
/sys/devices/pnp0/00:08/durations
and lots of usb devices...
root@zepto:/home/peter# cat /sys/devices/pnp0/00\:08/
active            durations         misc/             power/            subsystem/
cancel            enabled           options           ppi/              temp_deactivated
caps              firmware_node/    owned             pubek             timeouts
driver/           id                pcrs              resources         uevent
root@zepto:/home/peter# cat /sys/devices/pnp0/00\:08/*
1000000 4000000 152000000 [adjusted]
IFX0102
PNP0c31
state = active
mem 0xfed40000-0xfed44fff
io 0x4e-0x4f
io 0x1670-0x167f
irq 11
752000 2000000 752000 752000 [adjusted]
DRIVER=tpm_tis

I don't know if you want me to cat a specific file.. Perhaps the above is enough?

/Peter A

Thanks, Peter

#13 lore raw
In reply to Kent Yoder

2013-04-02 16:03 skrev Kent Yoder:

Quoted 41 lines

Hi Peter,

Quoted 23 lines · On Mon, Apr 1, 2013 at 4:17 PM, <[email protected]> wrote:

2013-03-28 14:12 skrev [email protected]:

Quoted 11 lines

What also might be worth a look - in your bugzilla it states:

[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31
(active)
[ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters.
[ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attempting to
read a pcr
value
[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
Quoted 7 lines

Can you perhaps try to enable your TPM in the BIOS? It's quite often hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings.
If your system does not have bios support for TPMs, please tell me so and I'll try to help you out.

I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...

Quoted 14 lines
root@zepto:/home/peter# dmesg | grep tpm
[   14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[   14.748276] tpm_tis 00:08: Adjusting TPM timeout parameters.
[   34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
root@zepto:/home/peter# tpm_version
Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011 (17),
Communication failure
root@zepto:/home/peter# tcsd -f
TCSD TDDL ioctl: (25) Inappropriate ioctl for device
TCSD TDDL Falling back to Read/Write device support.
TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired
TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087
Quoted 5 lines

Can you cat /sys/class/misc/tpm0/device/timeouts? Ivan Pryvalov
reported that his TPM showed values that were too small to keep from causing timeouts waiting on TPM commands, but too big to trigger the driver's code to scale them. (He saw 12000 for the 3 timeout values.)

Hi Kent

The values I'm seeing are:

root@zepto:~# cat /sys/class/misc/tpm0/device/timeouts
752000 2000000 752000 752000 [adjusted]

So I guess these are within a normal range?

Thanks,
Peter

Quoted 18 lines

If you're seeing similar values, can you try the attached patch?

Thanks,
Kent

Quoted 13 lines

/Peter A

------------------------------------------------------------------------------
Own the Future-Intel&reg; Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
tpmdd-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel

#14 lore raw
Quoted 51 lines · On Sat, Apr 06, 2013 at 06:00:59PM +0200, [email protected] wrote:

2013-04-02 16:03 skrev Kent Yoder:

Quoted 44 lines

Hi Peter,

Quoted 26 lines · On Mon, Apr 1, 2013 at 4:17 PM, <[email protected]> wrote:

2013-03-28 14:12 skrev [email protected]:

Quoted 12 lines

What also might be worth a look - in your bugzilla it states:

[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102
PNP0c31
(active)
[ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters.
[ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attempting to
read a pcr
value
[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
Quoted 9 lines

Can you perhaps try to enable your TPM in the BIOS? It's quite often
hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings.
If your system does not have bios support for TPMs, please tell me so
and I'll try to help you out.

I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...

Quoted 14 lines
root@zepto:/home/peter# dmesg | grep tpm
[   14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[   14.748276] tpm_tis 00:08: Adjusting TPM timeout parameters.
[   34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
root@zepto:/home/peter# tpm_version
Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011 (17),
Communication failure
root@zepto:/home/peter# tcsd -f
TCSD TDDL ioctl: (25) Inappropriate ioctl for device
TCSD TDDL Falling back to Read/Write device support.
TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired
TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087
Quoted 6 lines

Can you cat /sys/class/misc/tpm0/device/timeouts? Ivan Pryvalov
reported that his TPM showed values that were too small to keep from causing timeouts waiting on TPM commands, but too big to trigger the driver's code to scale them. (He saw 12000 for the 3 timeout values.)

Quoted 8 lines

Hi Kent

The values I'm seeing are:

root@zepto:~# cat /sys/class/misc/tpm0/device/timeouts
752000 2000000 752000 752000 [adjusted]

So I guess these are within a normal range?

Yes, these look normal. So it seems you can send commands to the TPM
up until you try to suspend? Can you try to cat other files like /sys/class/misc/tpm0/device/pcrs? This is the simplest way to send some command to the TPM...

Kent

Quoted 21 lines

Thanks,
Peter

Quoted 18 lines

If you're seeing similar values, can you try the attached patch?

Thanks,
Kent

Quoted 13 lines

/Peter A

------------------------------------------------------------------------------
Own the Future-Intel&reg; Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
tpmdd-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel

#15 lore raw

2013-04-11 23:41 skrev Kent Yoder:

Quoted 65 lines · On Sat, Apr 06, 2013 at 06:00:59PM +0200, [email protected] wrote:
Quoted 55 lines

2013-04-02 16:03 skrev Kent Yoder:

Quoted 11 lines

Hi Peter,

Quoted 8 lines · On Mon, Apr 1, 2013 at 4:17 PM, <[email protected]> wrote:

2013-03-28 14:12 skrev [email protected]:

Quoted 7 lines

What also might be worth a look - in your bugzilla it states:

[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102
PNP0c31
(active)
[ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters.
[ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred attempting 

to

Quoted 18 lines
Quoted 18 lines
Quoted 5 lines

read a pcr
value

[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
Quoted 9 lines

Can you perhaps try to enable your TPM in the BIOS? It's quite often
hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings.
If your system does not have bios support for TPMs, please tell me so
and I'll try to help you out.

I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...

Quoted 8 lines
Quoted 8 lines
root@zepto:/home/peter# dmesg | grep tpm
[   14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[   14.748276] tpm_tis 00:08: Adjusting TPM timeout parameters.
[   34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
root@zepto:/home/peter# tpm_version
Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011 

(17),

Quoted 9 lines
Quoted 6 lines

Communication failure

root@zepto:/home/peter# tcsd -f
TCSD TDDL ioctl: (25) Inappropriate ioctl for device
TCSD TDDL Falling back to Read/Write device support.
TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired
TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087

Can you cat /sys/class/misc/tpm0/device/timeouts? Ivan Pryvalov
reported that his TPM showed values that were too small to keep

from

Quoted 1 line

causing timeouts waiting on TPM commands, but too big to trigger

the

Quoted 3 lines

driver's code to scale them. (He saw 12000 for the 3 timeout values.)

Quoted 8 lines

Hi Kent

The values I'm seeing are:

root@zepto:~# cat /sys/class/misc/tpm0/device/timeouts
752000 2000000 752000 752000 [adjusted]

So I guess these are within a normal range?

Quoted 8 lines

Yes, these look normal. So it seems you can send commands to the
TPM
up until you try to suspend? Can you try to cat other files like /sys/class/misc/tpm0/device/pcrs? This is the simplest way to send some command to the TPM...

Kent

Hi Kent, I'm sorry I haven't replied to this message before. I must have missed it!

root@zepto:/sys/class/misc/tpm0# ll
drwxr-xr-x 3 root root    0 Apr 23 16:20 ./
drwxr-xr-x 3 root root    0 Apr 23 16:20 ../
-r--r--r-- 1 root root 4096 Apr 23 16:26 dev
lrwxrwxrwx 1 root root    0 Apr 23 16:26 device -> ../../../00:08/
drwxr-xr-x 2 root root    0 Apr 23 16:26 power/
lrwxrwxrwx 1 root root    0 Apr 23 16:20 subsystem -> ../../../../../class/misc/
-rw-r--r-- 1 root root 4096 Apr 23 16:20 uevent
root@zepto:/sys/class/misc/tpm0# cat dev
10:224
root@zepto:/sys/class/misc/tpm0# cat device/pcrs   (prints nothing after a delay of a second or so)
root@zepto:/sys/class/misc/tpm0# cat uevent
MAJOR=10
MINOR=224
DEVNAME=tpm0
root@zepto:/sys/class/misc/tpm0# cat device/active
root@zepto:/sys/class/misc/tpm0# cat device/cancel
cat: device/cancel: Permission denied
root@zepto:/sys/class/misc/tpm0# cat device/caps
root@zepto:/sys/class/misc/tpm0# cat device/durations
1000000 4000000 152000000 [adjusted]
root@zepto:/sys/class/misc/tpm0# cat device/enabled
root@zepto:/sys/class/misc/tpm0# cat device/id
IFX0102
PNP0c31
root@zepto:/sys/class/misc/tpm0# cat device/options
root@zepto:/sys/class/misc/tpm0# cat device/owned
root@zepto:/sys/class/misc/tpm0# cat device/pubek
root@zepto:/sys/class/misc/tpm0# cat device/resources
state = active
mem 0xfed40000-0xfed44fff
io 0x4e-0x4f
io 0x1670-0x167f
irq 11
root@zepto:/sys/class/misc/tpm0# cat device/temp_deactivated
root@zepto:/sys/class/misc/tpm0# cat device/timeouts
752000 2000000 752000 752000 [adjusted]
root@zepto:/sys/class/misc/tpm0# cat device/uevent
DRIVER=tpm_tis

To be able to do the 'cat' above, I usually need to restart my computer, otherwise the files aren't there. That's probably after I've put the computer in sleep mode (which works if I add tpm_tis to the module blacklist). Perhaps the same problem is related to this one:
I just did a grep of my dmesg and saw some new error messages (28) in it. Perhaps they started occurring after I enabled it in BIOS.

root@zepto:/home/peter# dmesg | grep tpm_
[   11.369198] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[   11.508115] tpm_tis 00:08: Adjusting TPM timeout parameters.
[   32.560040] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[ 4320.577827] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4320.636111] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts
[ 4320.696081] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations
[ 4320.696091] tpm_tis 00:08: Could not get TPM timeouts and durations
[ 9279.692915] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9279.756184] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts
[ 9279.822186] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations
[ 9279.822197] tpm_tis 00:08: Could not get TPM timeouts and durations
[10968.845856] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[10968.904111] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts
[10968.964100] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations
[10968.964111] tpm_tis 00:08: Could not get TPM timeouts and durations
[13304.341746] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[13304.400093] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the timeouts
[13304.464134] tpm_tis 00:08: A TPM error (28) occurred attempting to determine the durations
[13304.464142] tpm_tis 00:08: Could not get TPM timeouts and durations

Thank you,
Peter A

Quoted 22 lines
Quoted 22 lines

Thanks,
Peter

Quoted 19 lines

If you're seeing similar values, can you try the attached patch?

Thanks,
Kent

Quoted 14 lines

/Peter A

------------------------------------------------------------------------------
Own the Future-Intel&reg; Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
tpmdd-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel

#16 lore raw
Quoted 131 lines · On Tue, Apr 23, 2013 at 04:30:53PM +0200, [email protected] wrote:

2013-04-11 23:41 skrev Kent Yoder:

Quoted 66 lines
Quoted 55 lines · On Sat, Apr 06, 2013 at 06:00:59PM +0200, [email protected] wrote:

2013-04-02 16:03 skrev Kent Yoder:

Quoted 11 lines

Hi Peter,

Quoted 8 lines · On Mon, Apr 1, 2013 at 4:17 PM, <[email protected]> wrote:

2013-03-28 14:12 skrev [email protected]:

Quoted 7 lines

What also might be worth a look - in your bugzilla it states:

[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102
PNP0c31
(active)
[ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters.
[ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred

attempting to

Quoted 18 lines
Quoted 18 lines
Quoted 5 lines

read a pcr
value

[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
Quoted 9 lines

Can you perhaps try to enable your TPM in the BIOS? It's quite often
hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings.
If your system does not have bios support for TPMs, please tell me so
and I'll try to help you out.

I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...

Quoted 8 lines
Quoted 8 lines
root@zepto:/home/peter# dmesg | grep tpm
[   14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[   14.748276] tpm_tis 00:08: Adjusting TPM timeout parameters.
[   34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
root@zepto:/home/peter# tpm_version
Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011

(17),

Quoted 9 lines
Quoted 6 lines

Communication failure

root@zepto:/home/peter# tcsd -f
TCSD TDDL ioctl: (25) Inappropriate ioctl for device
TCSD TDDL Falling back to Read/Write device support.
TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired
TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087

Can you cat /sys/class/misc/tpm0/device/timeouts? Ivan Pryvalov
reported that his TPM showed values that were too small to keep

from

Quoted 1 line

causing timeouts waiting on TPM commands, but too big to

trigger the

Quoted 3 lines

driver's code to scale them. (He saw 12000 for the 3 timeout values.)

Quoted 8 lines

Hi Kent

The values I'm seeing are:

root@zepto:~# cat /sys/class/misc/tpm0/device/timeouts
752000 2000000 752000 752000 [adjusted]

So I guess these are within a normal range?

Quoted 9 lines

Yes, these look normal. So it seems you can send commands to the
TPM
up until you try to suspend? Can you try to cat other files like /sys/class/misc/tpm0/device/pcrs? This is the simplest way to send some
command to the TPM...

Kent

Hi Kent, I'm sorry I haven't replied to this message before. I must have missed it!

root@zepto:/sys/class/misc/tpm0# ll
drwxr-xr-x 3 root root    0 Apr 23 16:20 ./
drwxr-xr-x 3 root root    0 Apr 23 16:20 ../
-r--r--r-- 1 root root 4096 Apr 23 16:26 dev
lrwxrwxrwx 1 root root    0 Apr 23 16:26 device -> ../../../00:08/
drwxr-xr-x 2 root root    0 Apr 23 16:26 power/
lrwxrwxrwx 1 root root    0 Apr 23 16:20 subsystem ->
../../../../../class/misc/
-rw-r--r-- 1 root root 4096 Apr 23 16:20 uevent
root@zepto:/sys/class/misc/tpm0# cat dev
10:224
root@zepto:/sys/class/misc/tpm0# cat device/pcrs   (prints nothing
after a delay of a second or so)
root@zepto:/sys/class/misc/tpm0# cat uevent
MAJOR=10
MINOR=224
DEVNAME=tpm0
root@zepto:/sys/class/misc/tpm0# cat device/active
root@zepto:/sys/class/misc/tpm0# cat device/cancel
cat: device/cancel: Permission denied
root@zepto:/sys/class/misc/tpm0# cat device/caps
root@zepto:/sys/class/misc/tpm0# cat device/durations
1000000 4000000 152000000 [adjusted]
root@zepto:/sys/class/misc/tpm0# cat device/enabled
root@zepto:/sys/class/misc/tpm0# cat device/id
IFX0102
PNP0c31
root@zepto:/sys/class/misc/tpm0# cat device/options
root@zepto:/sys/class/misc/tpm0# cat device/owned
root@zepto:/sys/class/misc/tpm0# cat device/pubek
root@zepto:/sys/class/misc/tpm0# cat device/resources
state = active
mem 0xfed40000-0xfed44fff
io 0x4e-0x4f
io 0x1670-0x167f
irq 11
root@zepto:/sys/class/misc/tpm0# cat device/temp_deactivated
root@zepto:/sys/class/misc/tpm0# cat device/timeouts
752000 2000000 752000 752000 [adjusted]
root@zepto:/sys/class/misc/tpm0# cat device/uevent
DRIVER=tpm_tis

To be able to do the 'cat' above, I usually need to restart my computer, otherwise the files aren't there. That's probably after I've put the computer in sleep mode (which works if I add tpm_tis to the module blacklist). Perhaps the same problem is related to this one:
I just did a grep of my dmesg and saw some new error messages (28) in it. Perhaps they started occurring after I enabled it in BIOS.

Quoted 7 lines
root@zepto:/home/peter# dmesg | grep tpm_
[   11.369198] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[   11.508115] tpm_tis 00:08: Adjusting TPM timeout parameters.
[   32.560040] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[ 4320.577827] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4320.636111] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the timeouts

Your TPM failed its internal self test (rc=28). At this point it will
have gone shut down. Looks like your hardware is broken. :(

Kent

Quoted 48 lines
[ 4320.696081] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the durations
[ 4320.696091] tpm_tis 00:08: Could not get TPM timeouts and durations
[ 9279.692915] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9279.756184] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the timeouts
[ 9279.822186] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the durations
[ 9279.822197] tpm_tis 00:08: Could not get TPM timeouts and durations
[10968.845856] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[10968.904111] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the timeouts
[10968.964100] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the durations
[10968.964111] tpm_tis 00:08: Could not get TPM timeouts and durations
[13304.341746] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[13304.400093] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the timeouts
[13304.464134] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the durations
[13304.464142] tpm_tis 00:08: Could not get TPM timeouts and durations

Thank you,
Peter A

Quoted 22 lines
Quoted 22 lines

Thanks,
Peter

Quoted 19 lines

If you're seeing similar values, can you try the attached patch?

Thanks,
Kent

Quoted 14 lines

/Peter A

------------------------------------------------------------------------------
Own the Future-Intel&reg; Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
tpmdd-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel

#17 lore raw

2013-04-23 16:43 skrev Kent Yoder:

Quoted 145 lines · On Tue, Apr 23, 2013 at 04:30:53PM +0200, [email protected] wrote:
Quoted 132 lines

2013-04-11 23:41 skrev Kent Yoder:

Quoted 20 lines
Quoted 18 lines · On Sat, Apr 06, 2013 at 06:00:59PM +0200, [email protected] wrote:

2013-04-02 16:03 skrev Kent Yoder:

Quoted 11 lines

Hi Peter,

Quoted 8 lines · On Mon, Apr 1, 2013 at 4:17 PM, <[email protected]> wrote:

2013-03-28 14:12 skrev [email protected]:

Quoted 7 lines

What also might be worth a look - in your bugzilla it states:

[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102
PNP0c31
(active)
[ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters.
[ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred

attempting to

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

read a pcr
value

[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

Can you perhaps try to enable your TPM in the BIOS? It's quite often
hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access

these

Quoted 42 lines
Quoted 33 lines
Quoted 9 lines
Quoted 9 lines
Quoted 5 lines

settings.
If your system does not have bios support for TPMs, please tell me so
and I'll try to help you out.

I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...

Quoted 8 lines
Quoted 8 lines
root@zepto:/home/peter# dmesg | grep tpm
[   14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[   14.748276] tpm_tis 00:08: Adjusting TPM timeout parameters.
[   34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
root@zepto:/home/peter# tpm_version
Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011

(17),

Quoted 9 lines
Quoted 6 lines

Communication failure

root@zepto:/home/peter# tcsd -f
TCSD TDDL ioctl: (25) Inappropriate ioctl for device
TCSD TDDL Falling back to Read/Write device support.
TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired
TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087

Can you cat /sys/class/misc/tpm0/device/timeouts? Ivan Pryvalov
reported that his TPM showed values that were too small to keep

from

Quoted 1 line

causing timeouts waiting on TPM commands, but too big to

trigger the

Quoted 3 lines

driver's code to scale them. (He saw 12000 for the 3 timeout values.)

Quoted 8 lines

Hi Kent

The values I'm seeing are:

root@zepto:~# cat /sys/class/misc/tpm0/device/timeouts
752000 2000000 752000 752000 [adjusted]

So I guess these are within a normal range?

Quoted 9 lines

Yes, these look normal. So it seems you can send commands to the
TPM
up until you try to suspend? Can you try to cat other files like /sys/class/misc/tpm0/device/pcrs? This is the simplest way to send some
command to the TPM...

Kent

Hi Kent, I'm sorry I haven't replied to this message before. I must have missed it!

root@zepto:/sys/class/misc/tpm0# ll
drwxr-xr-x 3 root root    0 Apr 23 16:20 ./
drwxr-xr-x 3 root root    0 Apr 23 16:20 ../
-r--r--r-- 1 root root 4096 Apr 23 16:26 dev
lrwxrwxrwx 1 root root    0 Apr 23 16:26 device -> ../../../00:08/
drwxr-xr-x 2 root root    0 Apr 23 16:26 power/
lrwxrwxrwx 1 root root    0 Apr 23 16:20 subsystem ->
../../../../../class/misc/
-rw-r--r-- 1 root root 4096 Apr 23 16:20 uevent
root@zepto:/sys/class/misc/tpm0# cat dev
10:224
root@zepto:/sys/class/misc/tpm0# cat device/pcrs   (prints nothing
after a delay of a second or so)
root@zepto:/sys/class/misc/tpm0# cat uevent
MAJOR=10
MINOR=224
DEVNAME=tpm0
root@zepto:/sys/class/misc/tpm0# cat device/active
root@zepto:/sys/class/misc/tpm0# cat device/cancel
cat: device/cancel: Permission denied
root@zepto:/sys/class/misc/tpm0# cat device/caps
root@zepto:/sys/class/misc/tpm0# cat device/durations
1000000 4000000 152000000 [adjusted]
root@zepto:/sys/class/misc/tpm0# cat device/enabled
root@zepto:/sys/class/misc/tpm0# cat device/id
IFX0102
PNP0c31
root@zepto:/sys/class/misc/tpm0# cat device/options
root@zepto:/sys/class/misc/tpm0# cat device/owned
root@zepto:/sys/class/misc/tpm0# cat device/pubek
root@zepto:/sys/class/misc/tpm0# cat device/resources
state = active
mem 0xfed40000-0xfed44fff
io 0x4e-0x4f
io 0x1670-0x167f
irq 11
root@zepto:/sys/class/misc/tpm0# cat device/temp_deactivated
root@zepto:/sys/class/misc/tpm0# cat device/timeouts
752000 2000000 752000 752000 [adjusted]
root@zepto:/sys/class/misc/tpm0# cat device/uevent
DRIVER=tpm_tis

To be able to do the 'cat' above, I usually need to restart my computer, otherwise the files aren't there. That's probably after I've put the computer in sleep mode (which works if I add tpm_tis to the module blacklist). Perhaps the same problem is related to this one:
I just did a grep of my dmesg and saw some new error messages (28) in it. Perhaps they started occurring after I enabled it in BIOS.

Quoted 7 lines
root@zepto:/home/peter# dmesg | grep tpm_
[   11.369198] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[   11.508115] tpm_tis 00:08: Adjusting TPM timeout parameters.
[   32.560040] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[ 4320.577827] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4320.636111] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the timeouts

Your TPM failed its internal self test (rc=28). At this point it
will
have gone shut down. Looks like your hardware is broken. :(

Quoted 1 line

Kent

But this only seems to happen after the tpm module has been unloaded when going to sleep. I don't get these messages after a reboot:

root@zepto:/sys/class/misc/tpm0# dmesg | grep tpm
[   12.068202] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[   12.212122] tpm_tis 00:08: Adjusting TPM timeout parameters.
[   33.068050] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  434.500088] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  485.180079] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  511.436081] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  523.412084] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  535.396083] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  550.316068] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  559.164074] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  570.028078] tpm_tis 00:08: tpm_transmit: tpm_send: error -62

/Peter

Quoted 50 lines
Quoted 50 lines
[ 4320.696081] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the durations
[ 4320.696091] tpm_tis 00:08: Could not get TPM timeouts and durations
[ 9279.692915] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9279.756184] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the timeouts
[ 9279.822186] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the durations
[ 9279.822197] tpm_tis 00:08: Could not get TPM timeouts and durations
[10968.845856] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[10968.904111] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the timeouts
[10968.964100] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the durations
[10968.964111] tpm_tis 00:08: Could not get TPM timeouts and durations
[13304.341746] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[13304.400093] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the timeouts
[13304.464134] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the durations
[13304.464142] tpm_tis 00:08: Could not get TPM timeouts and durations

Thank you,
Peter A

Quoted 23 lines
Quoted 23 lines

Thanks,
Peter

Quoted 20 lines

If you're seeing similar values, can you try the attached patch?

Thanks,
Kent

Quoted 15 lines

/Peter A

------------------------------------------------------------------------------
Own the Future-Intel&reg; Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
tpmdd-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel

#18 lore raw
Quoted 135 lines · On Tue, Apr 23, 2013 at 10:03 AM, <[email protected]> wrote:

2013-04-23 16:43 skrev Kent Yoder:

Quoted 133 lines · On Tue, Apr 23, 2013 at 04:30:53PM +0200, [email protected] wrote:
Quoted 132 lines

2013-04-11 23:41 skrev Kent Yoder:

Quoted 66 lines
Quoted 55 lines · On Sat, Apr 06, 2013 at 06:00:59PM +0200, [email protected] wrote:

2013-04-02 16:03 skrev Kent Yoder:

Quoted 11 lines

Hi Peter,

Quoted 8 lines · On Mon, Apr 1, 2013 at 4:17 PM, <[email protected]> wrote:

2013-03-28 14:12 skrev [email protected]:

Quoted 7 lines

What also might be worth a look - in your bugzilla it states:

[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102
PNP0c31
(active)
[ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters.
[ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred

attempting to

Quoted 18 lines
Quoted 18 lines
Quoted 5 lines

read a pcr
value

[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)
Quoted 9 lines

Can you perhaps try to enable your TPM in the BIOS? It's quite often
hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access these settings.
If your system does not have bios support for TPMs, please tell me so
and I'll try to help you out.

I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...

Quoted 8 lines
Quoted 8 lines
root@zepto:/home/peter# dmesg | grep tpm
[   14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[   14.748276] tpm_tis 00:08: Adjusting TPM timeout parameters.
[   34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
root@zepto:/home/peter# tpm_version
Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011

(17),

Quoted 9 lines
Quoted 6 lines

Communication failure

root@zepto:/home/peter# tcsd -f
TCSD TDDL ioctl: (25) Inappropriate ioctl for device
TCSD TDDL Falling back to Read/Write device support.
TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer expired
TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087

Can you cat /sys/class/misc/tpm0/device/timeouts? Ivan Pryvalov
reported that his TPM showed values that were too small to keep

from

Quoted 1 line

causing timeouts waiting on TPM commands, but too big to

trigger the

Quoted 3 lines

driver's code to scale them. (He saw 12000 for the 3 timeout values.)

Quoted 8 lines

Hi Kent

The values I'm seeing are:

root@zepto:~# cat /sys/class/misc/tpm0/device/timeouts
752000 2000000 752000 752000 [adjusted]

So I guess these are within a normal range?

Quoted 9 lines

Yes, these look normal. So it seems you can send commands to the
TPM
up until you try to suspend? Can you try to cat other files like /sys/class/misc/tpm0/device/pcrs? This is the simplest way to send some
command to the TPM...

Kent

Hi Kent, I'm sorry I haven't replied to this message before. I must have missed it!

root@zepto:/sys/class/misc/tpm0# ll
drwxr-xr-x 3 root root    0 Apr 23 16:20 ./
drwxr-xr-x 3 root root    0 Apr 23 16:20 ../
-r--r--r-- 1 root root 4096 Apr 23 16:26 dev
lrwxrwxrwx 1 root root    0 Apr 23 16:26 device -> ../../../00:08/
drwxr-xr-x 2 root root    0 Apr 23 16:26 power/
lrwxrwxrwx 1 root root    0 Apr 23 16:20 subsystem ->
../../../../../class/misc/
-rw-r--r-- 1 root root 4096 Apr 23 16:20 uevent
root@zepto:/sys/class/misc/tpm0# cat dev
10:224
root@zepto:/sys/class/misc/tpm0# cat device/pcrs   (prints nothing
after a delay of a second or so)
root@zepto:/sys/class/misc/tpm0# cat uevent
MAJOR=10
MINOR=224
DEVNAME=tpm0
root@zepto:/sys/class/misc/tpm0# cat device/active
root@zepto:/sys/class/misc/tpm0# cat device/cancel
cat: device/cancel: Permission denied
root@zepto:/sys/class/misc/tpm0# cat device/caps
root@zepto:/sys/class/misc/tpm0# cat device/durations
1000000 4000000 152000000 [adjusted]
root@zepto:/sys/class/misc/tpm0# cat device/enabled
root@zepto:/sys/class/misc/tpm0# cat device/id
IFX0102
PNP0c31
root@zepto:/sys/class/misc/tpm0# cat device/options
root@zepto:/sys/class/misc/tpm0# cat device/owned
root@zepto:/sys/class/misc/tpm0# cat device/pubek
root@zepto:/sys/class/misc/tpm0# cat device/resources
state = active
mem 0xfed40000-0xfed44fff
io 0x4e-0x4f
io 0x1670-0x167f
irq 11
root@zepto:/sys/class/misc/tpm0# cat device/temp_deactivated
root@zepto:/sys/class/misc/tpm0# cat device/timeouts
752000 2000000 752000 752000 [adjusted]
root@zepto:/sys/class/misc/tpm0# cat device/uevent
DRIVER=tpm_tis

To be able to do the 'cat' above, I usually need to restart my computer, otherwise the files aren't there. That's probably after I've put the computer in sleep mode (which works if I add tpm_tis to the module blacklist). Perhaps the same problem is related to this one:
I just did a grep of my dmesg and saw some new error messages (28) in it. Perhaps they started occurring after I enabled it in BIOS.

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
root@zepto:/home/peter# dmesg | grep tpm_
[   11.369198] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[   11.508115] tpm_tis 00:08: Adjusting TPM timeout parameters.
[   32.560040] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[ 4320.577827] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4320.636111] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the timeouts

So the above messages happen at the time you reinsert the module
after a resume?

Kent

Quoted 68 lines

But this only seems to happen after the tpm module has been unloaded when going to sleep. I don't get these messages after a reboot:

root@zepto:/sys/class/misc/tpm0# dmesg | grep tpm
[   12.068202] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[   12.212122] tpm_tis 00:08: Adjusting TPM timeout parameters.
[   33.068050] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  434.500088] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  485.180079] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  511.436081] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  523.412084] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  535.396083] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  550.316068] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  559.164074] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  570.028078] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
/Peter
Quoted 51 lines
Quoted 51 lines
[ 4320.696081] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the durations
[ 4320.696091] tpm_tis 00:08: Could not get TPM timeouts and durations
[ 9279.692915] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9279.756184] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the timeouts
[ 9279.822186] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the durations
[ 9279.822197] tpm_tis 00:08: Could not get TPM timeouts and durations
[10968.845856] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[10968.904111] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the timeouts
[10968.964100] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the durations
[10968.964111] tpm_tis 00:08: Could not get TPM timeouts and durations
[13304.341746] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[13304.400093] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the timeouts
[13304.464134] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the durations
[13304.464142] tpm_tis 00:08: Could not get TPM timeouts and durations

Thank you,
Peter A

Quoted 24 lines
Quoted 24 lines

Thanks,
Peter

Quoted 21 lines

If you're seeing similar values, can you try the attached patch?

Thanks,
Kent

Quoted 16 lines

/Peter A

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

------------------------------------------------------------------------------

Own the Future-Intel&reg; Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13. http://p.sf.net/sfu/intel_levelupd2d
_______________________________________________
tpmdd-devel mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel

#19 lore raw

2013-04-23 18:29 skrev Kent Yoder:

Quoted 159 lines · On Tue, Apr 23, 2013 at 10:03 AM, <[email protected]> wrote:
Quoted 147 lines

2013-04-23 16:43 skrev Kent Yoder:

Quoted 145 lines · On Tue, Apr 23, 2013 at 04:30:53PM +0200, [email protected] wrote:
Quoted 144 lines

2013-04-11 23:41 skrev Kent Yoder:

Quoted 6 lines
Quoted 4 lines · On Sat, Apr 06, 2013 at 06:00:59PM +0200, [email protected] wrote:

2013-04-02 16:03 skrev Kent Yoder:

Quoted 3 lines

Hi Peter,

On Mon, Apr 1, 2013 at 4:17 PM, <[email protected]>

Quoted 8 lines · wrote:
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines

2013-03-28 14:12 skrev [email protected]:

Quoted 7 lines

What also might be worth a look - in your bugzilla it states:

[ 0.225891] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102
PNP0c31
(active)
[ 9.150673] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9.292148] tpm_tis 00:0a: Adjusting TPM timeout parameters.
[ 10.084067] tpm_tis 00:0a: A TPM error (7) occurred
Quoted 7 lines
Quoted 7 lines

attempting to

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

read a pcr
value

[ 10.084077] tpm_tis 00:0a: TPM is disabled/deactivated (0x7)

Can you perhaps try to enable your TPM in the BIOS? It's

quite

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 3 lines

often
hidden under "embedded security device" or "system security". Quite often you have to have a bios password set to access

these

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
Quoted 5 lines

settings.
If your system does not have bios support for TPMs, please tell me so
and I'll try to help you out.

I've enabled it in BIOS now, and the output seems to be a bit different. Not too uplifting though...

root@zepto:/home/peter# dmesg | grep tpm
[   14.631662] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 

16)

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
[   14.748276] tpm_tis 00:08: Adjusting TPM timeout 

parameters.

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
[   34.908128] tpm_tis 00:08: tpm_transmit: tpm_send: error 

-62

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
[  125.992108] tpm_tis 00:08: tpm_transmit: tpm_send: error 

-62

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
[  212.908502] tpm_tis 00:08: tpm_transmit: tpm_send: error 

-62

Quoted 8 lines
Quoted 8 lines
Quoted 2 lines
Quoted 2 lines
root@zepto:/home/peter# tpm_version
Tspi_Context_Connect failed: 0x00003011 - layer=tsp, code=0011

(17),

Quoted 5 lines
Quoted 5 lines

Communication failure

root@zepto:/home/peter# tcsd -f
TCSD TDDL ioctl: (25) Inappropriate ioctl for device
TCSD TDDL Falling back to Read/Write device support.
TCSD TDDL ERROR: write to device /dev/tpm0 failed: Timer 

expired

Quoted 3 lines
Quoted 3 lines
Quoted 3 lines
Quoted 1 line

TCSD TCS ERROR: TCS GetCapability failed with result = 0x1087

Can you cat /sys/class/misc/tpm0/device/timeouts? Ivan

Pryvalov

Quoted 9 lines
Quoted 9 lines
Quoted 1 line

reported that his TPM showed values that were too small to keep

from

Quoted 1 line

causing timeouts waiting on TPM commands, but too big to

trigger the

Quoted 3 lines

driver's code to scale them. (He saw 12000 for the 3 timeout values.)

Hi Kent

Quoted 8 lines
Quoted 6 lines

The values I'm seeing are:

root@zepto:~# cat /sys/class/misc/tpm0/device/timeouts
752000 2000000 752000 752000 [adjusted]

So I guess these are within a normal range?

Yes, these look normal. So it seems you can send commands to

the

Quoted 3 lines

TPM
up until you try to suspend? Can you try to cat other files like /sys/class/misc/tpm0/device/pcrs? This is the simplest way to

send

Quoted 5 lines

some
command to the TPM...

Kent

Hi Kent, I'm sorry I haven't replied to this message before. I must have missed it!

root@zepto:/sys/class/misc/tpm0# ll
drwxr-xr-x 3 root root    0 Apr 23 16:20 ./
drwxr-xr-x 3 root root    0 Apr 23 16:20 ../
-r--r--r-- 1 root root 4096 Apr 23 16:26 dev
lrwxrwxrwx 1 root root    0 Apr 23 16:26 device -> ../../../00:08/
drwxr-xr-x 2 root root    0 Apr 23 16:26 power/
lrwxrwxrwx 1 root root    0 Apr 23 16:20 subsystem ->
../../../../../class/misc/
-rw-r--r-- 1 root root 4096 Apr 23 16:20 uevent
root@zepto:/sys/class/misc/tpm0# cat dev
10:224
root@zepto:/sys/class/misc/tpm0# cat device/pcrs   (prints nothing
after a delay of a second or so)
root@zepto:/sys/class/misc/tpm0# cat uevent
MAJOR=10
MINOR=224
DEVNAME=tpm0
root@zepto:/sys/class/misc/tpm0# cat device/active
root@zepto:/sys/class/misc/tpm0# cat device/cancel
cat: device/cancel: Permission denied
root@zepto:/sys/class/misc/tpm0# cat device/caps
root@zepto:/sys/class/misc/tpm0# cat device/durations
1000000 4000000 152000000 [adjusted]
root@zepto:/sys/class/misc/tpm0# cat device/enabled
root@zepto:/sys/class/misc/tpm0# cat device/id
IFX0102
PNP0c31
root@zepto:/sys/class/misc/tpm0# cat device/options
root@zepto:/sys/class/misc/tpm0# cat device/owned
root@zepto:/sys/class/misc/tpm0# cat device/pubek
root@zepto:/sys/class/misc/tpm0# cat device/resources
state = active
mem 0xfed40000-0xfed44fff
io 0x4e-0x4f
io 0x1670-0x167f
irq 11
root@zepto:/sys/class/misc/tpm0# cat device/temp_deactivated
root@zepto:/sys/class/misc/tpm0# cat device/timeouts
752000 2000000 752000 752000 [adjusted]
root@zepto:/sys/class/misc/tpm0# cat device/uevent
DRIVER=tpm_tis

To be able to do the 'cat' above, I usually need to restart my computer, otherwise the files aren't there. That's probably after I've put the computer in sleep mode (which works if I add tpm_tis to the module blacklist). Perhaps the same problem is related to this one:
I just did a grep of my dmesg and saw some new error messages (28) in it. Perhaps they started occurring after I enabled it in BIOS.

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
root@zepto:/home/peter# dmesg | grep tpm_
[   11.369198] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[   11.508115] tpm_tis 00:08: Adjusting TPM timeout parameters.
[   32.560040] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[ 4320.577827] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4320.636111] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the timeouts

So the above messages happen at the time you reinsert the module
after a resume?

Quoted 1 line

Kent

Sadly I don't know. Reinserting the module after a resume doesn't really seem to do much, for instance it doesn't recreate the directories I listed/cat above.

But since one of the messages is after 4320 (seconds?) I guess it must be something like that. But I didn't see them when I tried modprobing the module several times, to get the directories in /sys/ back.

/Peter

Quoted 72 lines
Quoted 72 lines

But this only seems to happen after the tpm module has been unloaded when going to sleep. I don't get these messages after a reboot:

root@zepto:/sys/class/misc/tpm0# dmesg | grep tpm
[   12.068202] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[   12.212122] tpm_tis 00:08: Adjusting TPM timeout parameters.
[   33.068050] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  434.500088] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  485.180079] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  511.436081] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  523.412084] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  535.396083] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  550.316068] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  559.164074] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
[  570.028078] tpm_tis 00:08: tpm_transmit: tpm_send: error -62
/Peter
Quoted 54 lines
Quoted 54 lines
[ 4320.696081] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the durations
[ 4320.696091] tpm_tis 00:08: Could not get TPM timeouts and durations
[ 9279.692915] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[ 9279.756184] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the timeouts
[ 9279.822186] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the durations
[ 9279.822197] tpm_tis 00:08: Could not get TPM timeouts and durations
[10968.845856] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[10968.904111] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the timeouts
[10968.964100] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the durations
[10968.964111] tpm_tis 00:08: Could not get TPM timeouts and durations
[13304.341746] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[13304.400093] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the timeouts
[13304.464134] tpm_tis 00:08: A TPM error (28) occurred attempting
to determine the durations
[13304.464142] tpm_tis 00:08: Could not get TPM timeouts and durations

Thank you,
Peter A

Quoted 4 lines
Quoted 4 lines

Thanks,
Peter

Quoted 1 line

If you're seeing similar values, can you try the attached

patch?

Quoted 11 lines
Quoted 11 lines
Quoted 11 lines

Thanks,
Kent

Quoted 7 lines

/Peter A

Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

------------------------------------------------------------------------------
Own the Future-Intel&reg; Level Up Game Demo Contest 2013 Rise to greatness in Intel's independent game demo contest. Compete for recognition, cash, and the chance to get your game on Steam. $5K grand prize plus 10 genre and skill prizes. Submit your demo by 6/6/13.

http://p.sf.net/sfu/intel_levelupd2d

Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

_______________________________________________
tpmdd-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/tpmdd-devel