5.15.178-rc1 review

This is the start of the stable review cycle for the 5.15.178 release. There are 24 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat, 01 Feb 2025 14:01:15 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.178-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.15.178-rc1

Jack Greiner <[email protected]>
Input: xpad - add support for wooting two he (arm)

Nilton Perim Neto <[email protected]>
Input: xpad - add unofficial Xbox 360 wireless receiver clone

Mark Pearson <[email protected]>
Input: atkbd - map F23 key to support default copilot shortcut

Lianqin Hu <[email protected]>
ALSA: usb-audio: Add delay quirk for USB Audio Device

Greg Kroah-Hartman <[email protected]>
Revert "usb: gadget: u_serial: Disable ep before setting port to null to fix the crash caused by port being null"

Qasim Ijaz <[email protected]>
USB: serial: quatech2: fix null-ptr-deref in qt2_process_read_urb()

Anjaneyulu <[email protected]>
wifi: iwlwifi: add a few rate index validity checks

Easwar Hariharan <[email protected]>
scsi: storvsc: Ratelimit warning logs to prevent VM denial of service

Ido Schimmel <[email protected]>
ipv4: ip_tunnel: Fix suspicious RCU usage warning in ip_tunnel_find()

Akihiko Odaki <[email protected]>
platform/chrome: cros_ec_typec: Check for EC driver

Konstantin Komarov <[email protected]>
fs/ntfs3: Additional check in ntfs_file_release

Luiz Augusto von Dentz <[email protected]>
Bluetooth: RFCOMM: Fix not validating setsockopt user input

Luiz Augusto von Dentz <[email protected]>
Bluetooth: SCO: Fix not validating setsockopt user input

Alex Williamson <[email protected]>
vfio/platform: check the bounds of read/write syscalls

Jamal Hadi Salim <[email protected]>
net: sched: fix ets qdisc OOB Indexing

Andreas Gruenbacher <[email protected]>
gfs2: Truncate address space when flipping GFS2_DIF_JDATA flag

Paolo Abeni <[email protected]>
mptcp: don't always assume copied data in mptcp_cleanup_rbuf()

Cosmin Tanislav <[email protected]>
regmap: detach regmap from dev on regmap_exit

Charles Keepax <[email protected]>
ASoC: samsung: Add missing depends on I2C

Philippe Simons <[email protected]>
irqchip/sunxi-nmi: Add missing SKIP_WAKE flag

Xiang Zhang <[email protected]>
scsi: iscsi: Fix redundant response for ISCSI_UEVENT_GET_HOST_STATS request

Linus Walleij <[email protected]>
seccomp: Stub for !CONFIG_SECCOMP

Charles Keepax <[email protected]>
ASoC: samsung: Add missing selects for MFD_WM8994

Charles Keepax <[email protected]>
ASoC: wm8994: Add depends on MFD core

-------------

Diffstat:

 Makefile                                     |  4 ++--
 drivers/base/regmap/regmap.c                 | 12 ++++++++++++
 drivers/input/joystick/xpad.c                |  2 ++
 drivers/input/keyboard/atkbd.c               |  2 +-
 drivers/irqchip/irq-sunxi-nmi.c              |  3 ++-
 drivers/net/wireless/intel/iwlwifi/dvm/rs.c  |  7 +++++--
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c  |  9 ++++++---
 drivers/platform/chrome/cros_ec_typec.c      |  3 +++
 drivers/scsi/scsi_transport_iscsi.c          |  4 +++-
 drivers/scsi/storvsc_drv.c                   |  8 +++++++-
 drivers/usb/gadget/function/u_serial.c       |  8 ++++----
 drivers/usb/serial/quatech2.c                |  2 +-
 drivers/vfio/platform/vfio_platform_common.c | 10 ++++++++++
 fs/gfs2/file.c                               |  1 +
 fs/ntfs3/file.c                              | 12 ++++++++++--
 include/linux/seccomp.h                      |  2 +-
 include/net/bluetooth/bluetooth.h            |  9 +++++++++
 net/bluetooth/rfcomm/sock.c                  | 14 +++++---------
 net/bluetooth/sco.c                          | 19 ++++++++-----------
 net/ipv4/ip_tunnel.c                         |  2 +-
 net/mptcp/protocol.c                         | 18 +++++++++---------
 net/sched/sch_ets.c                          |  2 ++
 sound/soc/codecs/Kconfig                     |  1 +
 sound/soc/samsung/Kconfig                    |  6 ++++--
 sound/usb/quirks.c                           |  2 ++
 25 files changed, 111 insertions(+), 51 deletions(-)

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Charles Keepax <[email protected]>

[ Upstream commit 5ed01155cea69801f1f0c908954a56a5a3474bed ]

The ASoC driver should not be used without the MFD component. This was causing randconfig issues with regmap IRQ which is selected by the MFD part of the wm8994 driver.

---
 sound/soc/codecs/Kconfig | 1 +
 1 file changed, 1 insertion(+)

index 1750cc888bbe8..5aeec2ef14b46 100644
@@ -1776,6 +1776,7 @@ config SND_SOC_WM8993
 
 config SND_SOC_WM8994
 	tristate
+	depends on MFD_WM8994
 
 config SND_SOC_WM8995
 	tristate

2.39.5

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Charles Keepax <[email protected]>

[ Upstream commit fd55c6065bec5268740e944a1800e6fad00974d9 ]

Anything selecting SND_SOC_WM8994 should also select MFD_WM8994, as SND_SOC_WM8994 does not automatically do so. Add the missing selects.

---
 sound/soc/samsung/Kconfig | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index a2221ebb1b6ab..159bc501186f9 100644
@@ -214,8 +214,9 @@ config SND_SOC_SAMSUNG_TM2_WM5110
 
 config SND_SOC_SAMSUNG_ARIES_WM8994
 	tristate "SoC I2S Audio support for WM8994 on Aries"
-	depends on SND_SOC_SAMSUNG && MFD_WM8994 && IIO && EXTCON
+	depends on SND_SOC_SAMSUNG && IIO && EXTCON
 	select SND_SOC_BT_SCO
+	select MFD_WM8994
 	select SND_SOC_WM8994
 	select SND_SAMSUNG_I2S
 	help

@@ -229,6 +230,7 @@ config SND_SOC_SAMSUNG_MIDAS_WM1811
 	tristate "SoC I2S Audio support for Midas boards"
 	depends on SND_SOC_SAMSUNG
 	select SND_SAMSUNG_I2S
+	select MFD_WM8994
 	select SND_SOC_WM8994
 	help
 	  Say Y if you want to add support for SoC audio on the Midas boards.

2.39.5

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Linus Walleij <[email protected]>

[ Upstream commit f90877dd7fb5085dd9abd6399daf63dd2969fc90 ]

When using !CONFIG_SECCOMP with CONFIG_GENERIC_ENTRY, the randconfig bots found the following snag:

kernel/entry/common.c: In function 'syscall_trace_enter':

of function '__secure_computing' [-Wimplicit-function-declaration]

      52 |                 ret = __secure_computing(NULL);
         |                       ^~~~~~~~~~~~~~~~~~

Since generic entry calls __secure_computing() unconditionally, fix this by moving the stub out of the ifdef clause for CONFIG_HAVE_ARCH_SECCOMP_FILTER so it's always available.

---
 include/linux/seccomp.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 0c564e5d40ff2..15dee3991f11b 100644
@@ -68,10 +68,10 @@ struct seccomp_data;
 
 #ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER
 static inline int secure_computing(void) { return 0; }
-static inline int __secure_computing(const struct seccomp_data *sd) { return 0; }
 #else
 static inline void secure_computing_strict(int this_syscall) { return; }
 #endif
+static inline int __secure_computing(const struct seccomp_data *sd) { return 0; }
 
 static inline long prctl_get_seccomp(void)
 {

2.39.5

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xiang Zhang <[email protected]>

[ Upstream commit 63ca02221cc5aa0731fe2b0cc28158aaa4b84982 ]

The ISCSI_UEVENT_GET_HOST_STATS request is already handled in iscsi_get_host_stats(). This fix ensures that redundant responses are skipped in iscsi_if_rx().

- On success: send reply and stats from iscsi_get_host_stats() within if_recv_msg().

- On error: fall through.

---
 drivers/scsi/scsi_transport_iscsi.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index e044b65ee0d08..f839e8e497be3 100644
@@ -4124,7 +4124,7 @@ iscsi_if_rx(struct sk_buff *skb)
 		}
 		do {
 			/*
-			 * special case for GET_STATS:
+			 * special case for GET_STATS, GET_CHAP and GET_HOST_STATS:
 			 * on success - sending reply and stats from
 			 * inside of if_recv_msg(),
 			 * on error - fall through.

@@ -4133,6 +4133,8 @@ iscsi_if_rx(struct sk_buff *skb)
 				break;
 			if (ev->type == ISCSI_UEVENT_GET_CHAP && !err)
 				break;
+			if (ev->type == ISCSI_UEVENT_GET_HOST_STATS && !err)
+				break;
 			err = iscsi_if_send_reply(portid, nlh->nlmsg_type,
 						  ev, sizeof(*ev));
 			if (err == -EAGAIN && --retries < 0) {

2.39.5

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Philippe Simons <[email protected]>

[ Upstream commit 3a748d483d80f066ca4b26abe45cdc0c367d13e9 ]

Some boards with Allwinner SoCs connect the PMIC's IRQ pin to the SoC's NMI pin instead of a normal GPIO. Since the power key is connected to the PMIC, and people expect to wake up a suspended system via this key, the NMI IRQ controller must stay alive when the system goes into suspend.

Add the SKIP_WAKE flag to prevent the sunxi NMI controller from going to sleep, so that the power key can wake up those systems.

[ tglx: Fixed up coding style ]

---
 drivers/irqchip/irq-sunxi-nmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index 21d49791f8552..83c7417611fa5 100644
@@ -187,7 +187,8 @@ static int __init sunxi_sc_nmi_irq_init(struct device_node *node,
 	gc->chip_types[0].chip.irq_unmask	= irq_gc_mask_set_bit;
 	gc->chip_types[0].chip.irq_eoi		= irq_gc_ack_set_bit;
 	gc->chip_types[0].chip.irq_set_type	= sunxi_sc_nmi_set_type;
-	gc->chip_types[0].chip.flags		= IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED;
+	gc->chip_types[0].chip.flags		= IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED |
+						  IRQCHIP_SKIP_SET_WAKE;
 	gc->chip_types[0].regs.ack		= reg_offs->pend;
 	gc->chip_types[0].regs.mask		= reg_offs->enable;
 	gc->chip_types[0].regs.type		= reg_offs->ctrl;

2.39.5

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Charles Keepax <[email protected]>

[ Upstream commit 704dbe97a68153a84319ad63f526e12ba868b88e ]

When switching to selects for MFD_WM8994 a dependency should have also been added for I2C, as the dependency on MFD_WM8994 will not be considered by the select.

---
 sound/soc/samsung/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index 159bc501186f9..c04c38d58804c 100644
@@ -214,7 +214,7 @@ config SND_SOC_SAMSUNG_TM2_WM5110
 
 config SND_SOC_SAMSUNG_ARIES_WM8994
 	tristate "SoC I2S Audio support for WM8994 on Aries"
-	depends on SND_SOC_SAMSUNG && IIO && EXTCON
+	depends on SND_SOC_SAMSUNG && I2C && IIO && EXTCON
 	select SND_SOC_BT_SCO
 	select MFD_WM8994
 	select SND_SOC_WM8994

@@ -228,7 +228,7 @@ config SND_SOC_SAMSUNG_ARIES_WM8994
 
 config SND_SOC_SAMSUNG_MIDAS_WM1811
 	tristate "SoC I2S Audio support for Midas boards"
-	depends on SND_SOC_SAMSUNG
+	depends on SND_SOC_SAMSUNG && I2C
 	select SND_SAMSUNG_I2S
 	select MFD_WM8994
 	select SND_SOC_WM8994

2.39.5

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Cosmin Tanislav <[email protected]>

commit 3061e170381af96d1e66799d34264e6414d428a7 upstream.

At the end of __regmap_init(), if dev is not NULL, regmap_attach_dev() is called, which adds a devres reference to the regmap, to be able to retrieve a dev's regmap by name using dev_get_regmap().

When calling regmap_exit, the opposite does not happen, and the reference is kept until the dev is detached.

Add a regmap_detach_dev() function and call it in regmap_exit() to make sure that the devres reference is not kept.

Rule: add

---
 drivers/base/regmap/regmap.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

@@ -663,6 +663,17 @@ int regmap_attach_dev(struct device *dev
 }
 EXPORT_SYMBOL_GPL(regmap_attach_dev);
 
+static int dev_get_regmap_match(struct device *dev, void *res, void *data);
+
+static int regmap_detach_dev(struct device *dev, struct regmap *map)
+{
+	if (!dev)
+		return 0;
+
+	return devres_release(dev, dev_get_regmap_release,
+			      dev_get_regmap_match, (void *)map->name);
+}
+
 static enum regmap_endian regmap_get_reg_endian(const struct regmap_bus *bus,
 					const struct regmap_config *config)
 {

@@ -1531,6 +1542,7 @@ void regmap_exit(struct regmap *map)
 {
 	struct regmap_async *async;
 
+	regmap_detach_dev(map->dev, map);
 	regcache_exit(map);
 	regmap_debugfs_exit(map);
 	regmap_range_exit(map);

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paolo Abeni <[email protected]>

commit 551844f26da2a9f76c0a698baaffa631d1178645 upstream.

Under some corner cases the MPTCP protocol can end-up invoking mptcp_cleanup_rbuf() when no data has been copied, but such helper assumes the opposite condition.

Explicitly drop such assumption and performs the costly call only when strictly needed - before releasing the msk socket lock.

[ Conflicts in this version, because commit 581302298524 ("mptcp: error
out earlier on disconnect") has not been backported to this version, and there was no need to do so. The only conflict was in protocol.c, and easy to resolve: the context was different, but the same addition can still be made at the same spot in mptcp_recvmsg(). ]

---
 net/mptcp/protocol.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

@@ -462,13 +462,13 @@ static void mptcp_send_ack(struct mptcp_
 		mptcp_subflow_send_ack(mptcp_subflow_tcp_sock(subflow));
 }
 
-static void mptcp_subflow_cleanup_rbuf(struct sock *ssk)
+static void mptcp_subflow_cleanup_rbuf(struct sock *ssk, int copied)
 {
 	bool slow;
 
 	slow = lock_sock_fast(ssk);
 	if (tcp_can_send_ack(ssk))
-		tcp_cleanup_rbuf(ssk, 1);
+		tcp_cleanup_rbuf(ssk, copied);
 	unlock_sock_fast(ssk, slow);
 }
 

@@ -485,7 +485,7 @@ static bool mptcp_subflow_could_cleanup(
 			      (ICSK_ACK_PUSHED2 | ICSK_ACK_PUSHED)));
 }
 
-static void mptcp_cleanup_rbuf(struct mptcp_sock *msk)
+static void mptcp_cleanup_rbuf(struct mptcp_sock *msk, int copied)
 {
 	int old_space = READ_ONCE(msk->old_wspace);
 	struct mptcp_subflow_context *subflow;

@@ -493,14 +493,14 @@ static void mptcp_cleanup_rbuf(struct mp
 	int space =  __mptcp_space(sk);
 	bool cleanup, rx_empty;
 
-	cleanup = (space > 0) && (space >= (old_space << 1));
-	rx_empty = !__mptcp_rmem(sk);
+	cleanup = (space > 0) && (space >= (old_space << 1)) && copied;
+	rx_empty = !__mptcp_rmem(sk) && copied;
 
 	mptcp_for_each_subflow(msk, subflow) {
 		struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
 
 		if (cleanup || mptcp_subflow_could_cleanup(ssk, rx_empty))
-			mptcp_subflow_cleanup_rbuf(ssk);
+			mptcp_subflow_cleanup_rbuf(ssk, copied);
 	}
 }
 

@@ -2098,9 +2098,6 @@ static int mptcp_recvmsg(struct sock *sk
 
 		copied += bytes_read;
 
-		/* be sure to advertise window change */
-		mptcp_cleanup_rbuf(msk);
-
 		if (skb_queue_empty(&msk->receive_queue) && __mptcp_move_skbs(msk))
 			continue;
 

@@ -2152,9 +2149,12 @@ static int mptcp_recvmsg(struct sock *sk
 		}
 
 		pr_debug("block timeout %ld\n", timeo);
+		mptcp_cleanup_rbuf(msk, copied);
 		sk_wait_data(sk, &timeo, NULL);
 	}
 
+	mptcp_cleanup_rbuf(msk, copied);
+
 out_err:
 	if (cmsg_flags && copied >= 0) {
 		if (cmsg_flags & MPTCP_CMSG_TS)

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andreas Gruenbacher <[email protected]>

commit 7c9d9223802fbed4dee1ae301661bf346964c9d2 upstream.

Truncate an inode's address space when flipping the GFS2_DIF_JDATA flag:
depending on that flag, the pages in the address space will either use buffer heads or iomap_folio_state structs, and we cannot mix the two.

---
 fs/gfs2/file.c |    1 +
 1 file changed, 1 insertion(+)

@@ -257,6 +257,7 @@ static int do_gfs2_set_flags(struct inod
 		error = filemap_fdatawait(inode->i_mapping);
 		if (error)
 			goto out;
+		truncate_inode_pages(inode->i_mapping, 0);
 		if (new_flags & GFS2_DIF_JDATA)
 			gfs2_ordered_del_inode(ip);
 	}

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jamal Hadi Salim <[email protected]>

commit d62b04fca4340a0d468d7853bd66e511935a18cb upstream.

Haowei Yan <[email protected]> found that ets_class_from_arg() can index an Out-Of-Bound class in ets_class_from_arg() when passed clid of
0. The overflow may cause local privilege escalation.

 [   18.852298] ------------[ cut here ]------------
 [   18.853271] UBSAN: array-index-out-of-bounds in net/sched/sch_ets.c:93:20
 [   18.853743] index 18446744073709551615 is out of range for type 'ets_class [16]'
 [   18.854254] CPU: 0 UID: 0 PID: 1275 Comm: poc Not tainted 6.12.6-dirty #17
 [   18.854821] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
 [   18.856532] Call Trace:
 [   18.857441]  <TASK>
 [   18.858227]  dump_stack_lvl+0xc2/0xf0
 [   18.859607]  dump_stack+0x10/0x20
 [   18.860908]  __ubsan_handle_out_of_bounds+0xa7/0xf0
 [   18.864022]  ets_class_change+0x3d6/0x3f0
 [   18.864322]  tc_ctl_tclass+0x251/0x910
 [   18.864587]  ? lock_acquire+0x5e/0x140
 [   18.865113]  ? __mutex_lock+0x9c/0xe70
 [   18.866009]  ? __mutex_lock+0xa34/0xe70
 [   18.866401]  rtnetlink_rcv_msg+0x170/0x6f0
 [   18.866806]  ? __lock_acquire+0x578/0xc10
 [   18.867184]  ? __pfx_rtnetlink_rcv_msg+0x10/0x10
 [   18.867503]  netlink_rcv_skb+0x59/0x110
 [   18.867776]  rtnetlink_rcv+0x15/0x30
 [   18.868159]  netlink_unicast+0x1c3/0x2b0
 [   18.868440]  netlink_sendmsg+0x239/0x4b0
 [   18.868721]  ____sys_sendmsg+0x3e2/0x410
 [   18.869012]  ___sys_sendmsg+0x88/0xe0
 [   18.869276]  ? rseq_ip_fixup+0x198/0x260
 [   18.869563]  ? rseq_update_cpu_node_id+0x10a/0x190
 [   18.869900]  ? trace_hardirqs_off+0x5a/0xd0
 [   18.870196]  ? syscall_exit_to_user_mode+0xcc/0x220
 [   18.870547]  ? do_syscall_64+0x93/0x150
 [   18.870821]  ? __memcg_slab_free_hook+0x69/0x290
 [   18.871157]  __sys_sendmsg+0x69/0xd0
 [   18.871416]  __x64_sys_sendmsg+0x1d/0x30
 [   18.871699]  x64_sys_call+0x9e2/0x2670
 [   18.871979]  do_syscall_64+0x87/0x150
 [   18.873280]  ? do_syscall_64+0x93/0x150
 [   18.874742]  ? lock_release+0x7b/0x160
 [   18.876157]  ? do_user_addr_fault+0x5ce/0x8f0
 [   18.877833]  ? irqentry_exit_to_user_mode+0xc2/0x210
 [   18.879608]  ? irqentry_exit+0x77/0xb0
 [   18.879808]  ? clear_bhb_loop+0x15/0x70
 [   18.880023]  ? clear_bhb_loop+0x15/0x70
 [   18.880223]  ? clear_bhb_loop+0x15/0x70
 [   18.880426]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
 [   18.880683] RIP: 0033:0x44a957
 [   18.880851] Code: ff ff e8 fc 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 8974 24 10
 [   18.881766] RSP: 002b:00007ffcdd00fad8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 [   18.882149] RAX: ffffffffffffffda RBX: 00007ffcdd010db8 RCX: 000000000044a957
 [   18.882507] RDX: 0000000000000000 RSI: 00007ffcdd00fb70 RDI: 0000000000000003
 [   18.885037] RBP: 00007ffcdd010bc0 R08: 000000000703c770 R09: 000000000703c7c0
 [   18.887203] R10: 0000000000000080 R11: 0000000000000246 R12: 0000000000000001
 [   18.888026] R13: 00007ffcdd010da8 R14: 00000000004ca7d0 R15: 0000000000000001
 [   18.888395]  </TASK>
 [   18.888610] ---[ end trace ]---

---
 net/sched/sch_ets.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -91,6 +91,8 @@ ets_class_from_arg(struct Qdisc *sch, un
 {
 	struct ets_sched *q = qdisc_priv(sch);
 
+	if (arg == 0 || arg > q->nbands)
+		return NULL;
 	return &q->classes[arg - 1];
 }
 

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alex Williamson <[email protected]>

commit ce9ff21ea89d191e477a02ad7eabf4f996b80a69 upstream.

count and offset are passed from user space and not checked, only offset is capped to 40 bits, which can be used to read/write out of bounds of the device.

---
 drivers/vfio/platform/vfio_platform_common.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

@@ -388,6 +388,11 @@ static ssize_t vfio_platform_read_mmio(s
 {
 	unsigned int done = 0;
 
+	if (off >= reg->size)
+		return -EINVAL;
+
+	count = min_t(size_t, count, reg->size - off);
+
 	if (!reg->ioaddr) {
 		reg->ioaddr =
 			ioremap(reg->addr, reg->size);

@@ -466,6 +471,11 @@ static ssize_t vfio_platform_write_mmio(
 {
 	unsigned int done = 0;
 
+	if (off >= reg->size)
+		return -EINVAL;
+
+	count = min_t(size_t, count, reg->size - off);
+
 	if (!reg->ioaddr) {
 		reg->ioaddr =
 			ioremap(reg->addr, reg->size);

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <[email protected]>

commit 51eda36d33e43201e7a4fd35232e069b2c850b01 upstream.

syzbot reported sco_sock_setsockopt() is copying data without checking user input length.

BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in sco_sock_setsockopt+0xc0b/0xf90
net/bluetooth/sco.c:893
Read of size 4 at addr ffff88805f7b15a3 by task syz-executor.5/12578

---
 include/net/bluetooth/bluetooth.h |    9 +++++++++
 net/bluetooth/sco.c               |   19 ++++++++-----------
 2 files changed, 17 insertions(+), 11 deletions(-)

@@ -487,6 +487,15 @@ static inline struct sk_buff *bt_skb_sen
 	return skb;
 }
 
+static inline int bt_copy_from_sockptr(void *dst, size_t dst_size,
+				       sockptr_t src, size_t src_size)
+{
+	if (dst_size > src_size)
+		return -EINVAL;
+
+	return copy_from_sockptr(dst, src, dst_size);
+}
+
 int bt_to_errno(u16 code);
 
 void hci_sock_set_flag(struct sock *sk, int nr);

@@ -829,7 +829,7 @@ static int sco_sock_setsockopt(struct so
 			       sockptr_t optval, unsigned int optlen)
 {
 	struct sock *sk = sock->sk;
-	int len, err = 0;
+	int err = 0;
 	struct bt_voice voice;
 	u32 opt;
 

@@ -845,10 +845,9 @@ static int sco_sock_setsockopt(struct so
 			break;
 		}
 
-		if (copy_from_sockptr(&opt, optval, sizeof(u32))) {
-			err = -EFAULT;
+		err = bt_copy_from_sockptr(&opt, sizeof(opt), optval, optlen);
+		if (err)
 			break;
-		}
 
 		if (opt)
 			set_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags);

@@ -865,11 +864,10 @@ static int sco_sock_setsockopt(struct so
 
 		voice.setting = sco_pi(sk)->setting;
 
-		len = min_t(unsigned int, sizeof(voice), optlen);
-		if (copy_from_sockptr(&voice, optval, len)) {
-			err = -EFAULT;
+		err = bt_copy_from_sockptr(&voice, sizeof(voice), optval,
+					   optlen);
+		if (err)
 			break;
-		}
 
 		/* Explicitly check for these values */
 		if (voice.setting != BT_VOICE_TRANSPARENT &&

@@ -882,10 +880,9 @@ static int sco_sock_setsockopt(struct so
 		break;
 
 	case BT_PKT_STATUS:
-		if (copy_from_sockptr(&opt, optval, sizeof(u32))) {
-			err = -EFAULT;
+		err = bt_copy_from_sockptr(&opt, sizeof(opt), optval, optlen);
+		if (err)
 			break;
-		}
 
 		if (opt)
 			sco_pi(sk)->cmsg_mask |= SCO_CMSG_PKT_STATUS;

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <[email protected]>

commit a97de7bff13b1cc825c1b1344eaed8d6c2d3e695 upstream.

syzbot reported rfcomm_sock_setsockopt_old() is copying data without checking user input length.

BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset
include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr
include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in rfcomm_sock_setsockopt_old
net/bluetooth/rfcomm/sock.c:632 [inline]
BUG: KASAN: slab-out-of-bounds in rfcomm_sock_setsockopt+0x893/0xa70
net/bluetooth/rfcomm/sock.c:673
Read of size 4 at addr ffff8880209a8bc3 by task syz-executor632/5064

---
 net/bluetooth/rfcomm/sock.c |   14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)

@@ -636,7 +636,7 @@ static int rfcomm_sock_setsockopt_old(st
 
 	switch (optname) {
 	case RFCOMM_LM:
-		if (copy_from_sockptr(&opt, optval, sizeof(u32))) {
+		if (bt_copy_from_sockptr(&opt, sizeof(opt), optval, optlen)) {
 			err = -EFAULT;
 			break;
 		}

@@ -671,7 +671,6 @@ static int rfcomm_sock_setsockopt(struct
 	struct sock *sk = sock->sk;
 	struct bt_security sec;
 	int err = 0;
-	size_t len;
 	u32 opt;
 
 	BT_DBG("sk %p", sk);

@@ -693,11 +692,9 @@ static int rfcomm_sock_setsockopt(struct
 
 		sec.level = BT_SECURITY_LOW;
 
-		len = min_t(unsigned int, sizeof(sec), optlen);
-		if (copy_from_sockptr(&sec, optval, len)) {
-			err = -EFAULT;
+		err = bt_copy_from_sockptr(&sec, sizeof(sec), optval, optlen);
+		if (err)
 			break;
-		}
 
 		if (sec.level > BT_SECURITY_HIGH) {
 			err = -EINVAL;

@@ -713,10 +710,9 @@ static int rfcomm_sock_setsockopt(struct
 			break;
 		}
 
-		if (copy_from_sockptr(&opt, optval, sizeof(u32))) {
-			err = -EFAULT;
+		err = bt_copy_from_sockptr(&opt, sizeof(opt), optval, optlen);
+		if (err)
 			break;
-		}
 
 		if (opt)
 			set_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags);

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Konstantin Komarov <[email protected]>

commit 031d6f608290c847ba6378322d0986d08d1a645a upstream.

---
 fs/ntfs3/file.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

@@ -1192,8 +1192,16 @@ static int ntfs_file_release(struct inod
 	int err = 0;
 
 	/* If we are last writer on the inode, drop the block reservation. */
-	if (sbi->options->prealloc && ((file->f_mode & FMODE_WRITE) &&
-				      atomic_read(&inode->i_writecount) == 1)) {
+	if (sbi->options->prealloc &&
+	    ((file->f_mode & FMODE_WRITE) &&
+	     atomic_read(&inode->i_writecount) == 1)
+	   /*
+	    * The only file when inode->i_fop = &ntfs_file_operations and
+	    * init_rwsem(&ni->file.run_lock) is not called explicitly is MFT.
+	    *
+	    * Add additional check here.
+	    */
+	    && inode->i_ino != MFT_REC_MFT) {
 		ni_lock(ni);
 		down_write(&ni->file.run_lock);
 

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Akihiko Odaki <[email protected]>

commit 7464ff8bf2d762251b9537863db0e1caf9b0e402 upstream.

The EC driver may not be initialized when cros_typec_probe is called, particulary when CONFIG_CROS_EC_CHARDEV=m.

---
 drivers/platform/chrome/cros_ec_typec.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -1123,6 +1123,9 @@ static int cros_typec_probe(struct platf
 	}
 
 	ec_dev = dev_get_drvdata(&typec->ec->ec->dev);
+	if (!ec_dev)
+		return -EPROBE_DEFER;
+
 	typec->typec_cmd_supported = !!cros_ec_check_features(ec_dev, EC_FEATURE_TYPEC_CMD);
 	typec->needs_mux_ack = !!cros_ec_check_features(ec_dev,
 							EC_FEATURE_TYPEC_MUX_REQUIRE_AP_ACK);

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ido Schimmel <[email protected]>

commit 90e0569dd3d32f4f4d2ca691d3fa5a8a14a13c12 upstream.

The per-netns IP tunnel hash table is protected by the RTNL mutex and ip_tunnel_find() is only called from the control path where the mutex is taken.

Add a lockdep expression to hlist_for_each_entry_rcu() in ip_tunnel_find() in order to validate that the mutex is held and to silence the suspicious RCU usage warning [1].

[1]
WARNING: suspicious RCU usage 6.12.0-rc3-custom-gd95d9a31aceb #139 Not tainted
-----------------------------
net/ipv4/ip_tunnel.c:221 RCU-list traversed in non-reader section!!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by ip/362:
#0: ffffffff86fc7cb0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x377/0xf60

stack backtrace:
CPU: 12 UID: 0 PID: 362 Comm: ip Not tainted 6.12.0-rc3-custom-gd95d9a31aceb #139
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
 <TASK>
 dump_stack_lvl+0xba/0x110
 lockdep_rcu_suspicious.cold+0x4f/0xd6
 ip_tunnel_find+0x435/0x4d0
 ip_tunnel_newlink+0x517/0x7a0
 ipgre_newlink+0x14c/0x170
 __rtnl_newlink+0x1173/0x19c0
 rtnl_newlink+0x6c/0xa0
 rtnetlink_rcv_msg+0x3cc/0xf60
 netlink_rcv_skb+0x171/0x450
 netlink_unicast+0x539/0x7f0
 netlink_sendmsg+0x8c1/0xd80
 ____sys_sendmsg+0x8f9/0xc20
 ___sys_sendmsg+0x197/0x1e0
 __sys_sendmsg+0x122/0x1f0
 do_syscall_64+0xbb/0x1d0
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

---
 net/ipv4/ip_tunnel.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -218,7 +218,7 @@ static struct ip_tunnel *ip_tunnel_find(
 	struct ip_tunnel *t = NULL;
 	struct hlist_head *head = ip_bucket(itn, parms);
 
-	hlist_for_each_entry_rcu(t, head, hash_node) {
+	hlist_for_each_entry_rcu(t, head, hash_node, lockdep_rtnl_is_held()) {
 		if (local == t->parms.iph.saddr &&
 		    remote == t->parms.iph.daddr &&
 		    link == t->parms.link &&

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Easwar Hariharan <[email protected]>

commit d2138eab8cde61e0e6f62d0713e45202e8457d6d upstream.

If there's a persistent error in the hypervisor, the SCSI warning for failed I/O can flood the kernel log and max out CPU utilization, preventing troubleshooting from the VM side. Ratelimit the warning so it doesn't DoS the VM.

---
 drivers/scsi/storvsc_drv.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

@@ -189,6 +189,12 @@ struct vmscsi_win8_extension {
 	u32 queue_sort_ey;
 } __packed;
 
+#define storvsc_log_ratelimited(dev, level, fmt, ...)				\
+do {										\
+	if (do_logging(level))							\
+		dev_warn_ratelimited(&(dev)->device, fmt, ##__VA_ARGS__);	\
+} while (0)
+
 struct vmscsi_request {
 	u16 length;
 	u8 srb_status;

@@ -1231,7 +1237,7 @@ static void storvsc_on_io_completion(str
 		int loglevel = (stor_pkt->vm_srb.cdb[0] == TEST_UNIT_READY) ?
 			STORVSC_LOGGING_WARN : STORVSC_LOGGING_ERROR;
 
-		storvsc_log(device, loglevel,
+		storvsc_log_ratelimited(device, loglevel,
 			"tag#%d cmd 0x%x status: scsi 0x%x srb 0x%x hv 0x%x\n",
 			scsi_cmd_to_rq(request->cmd)->tag,
 			stor_pkt->vm_srb.cdb[0],

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Anjaneyulu <[email protected]>

commit efbe8f81952fe469d38655744627d860879dcde8 upstream.

Validate index before access iwl_rate_mcs to keep rate->index inside the valid boundaries. Use MCS_0_INDEX if index is less than MCS_0_INDEX and MCS_9_INDEX if index is greater then MCS_9_INDEX.

---
 drivers/net/wireless/intel/iwlwifi/dvm/rs.c |    7 +++++--
 drivers/net/wireless/intel/iwlwifi/mvm/rs.c |    9 ++++++---
 2 files changed, 11 insertions(+), 5 deletions(-)

@@ -130,7 +130,7 @@ static int iwl_hwrate_to_plcp_idx(u32 ra
 				return idx;
 	}
 
-	return -1;
+	return IWL_RATE_INVALID;
 }
 
 static void rs_rate_scale_perform(struct iwl_priv *priv,

@@ -3151,7 +3151,10 @@ static ssize_t rs_sta_dbgfs_scale_table_
 	for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) {
 		index = iwl_hwrate_to_plcp_idx(
 			le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags));
-		if (is_legacy(tbl->lq_type)) {
+		if (index == IWL_RATE_INVALID) {
+			desc += sprintf(buff + desc, " rate[%d] 0x%X invalid rate\n",
+				i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags));
+		} else if (is_legacy(tbl->lq_type)) {
 			desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps\n",
 				i, le32_to_cpu(lq_sta->lq.rs_table[i].rate_n_flags),
 				iwl_rate_mcs[index].mbps);

@@ -1119,10 +1119,13 @@ static void rs_get_lower_rate_down_colum
 
 		rate->bw = RATE_MCS_CHAN_WIDTH_20;
 
-		WARN_ON_ONCE(rate->index < IWL_RATE_MCS_0_INDEX ||
-			     rate->index > IWL_RATE_MCS_9_INDEX);
+		if (WARN_ON_ONCE(rate->index < IWL_RATE_MCS_0_INDEX))
+			rate->index = rs_ht_to_legacy[IWL_RATE_MCS_0_INDEX];
+		else if (WARN_ON_ONCE(rate->index > IWL_RATE_MCS_9_INDEX))
+			rate->index = rs_ht_to_legacy[IWL_RATE_MCS_9_INDEX];
+		else
+			rate->index = rs_ht_to_legacy[rate->index];
 
-		rate->index = rs_ht_to_legacy[rate->index];
 		rate->ldpc = false;
 	} else {
 		/* Downgrade to SISO with same MCS if in MIMO  */

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Qasim Ijaz <[email protected]>

commit 575a5adf48b06a2980c9eeffedf699ed5534fade upstream.

This patch addresses a null-ptr-deref in qt2_process_read_urb() due to an incorrect bounds check in the following:

       if (newport > serial->num_ports) {
               dev_err(&port->dev,
                       "%s - port change to invalid port: %i\n",
                       __func__, newport);
               break;
       }

The condition doesn't account for the valid range of the serial->port buffer, which is from 0 to serial->num_ports - 1. When newport is equal to serial->num_ports, the assignment of "port" in the following code is out-of-bounds and NULL:

       serial_priv->current_port = newport;
       port = serial->port[serial_priv->current_port];

The fix checks if newport is greater than or equal to serial->num_ports indicating it is out-of-bounds.

---
 drivers/usb/serial/quatech2.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -525,7 +525,7 @@ static void qt2_process_read_urb(struct
 
 				newport = *(ch + 3);
 
-				if (newport > serial->num_ports) {
+				if (newport >= serial->num_ports) {
 					dev_err(&port->dev,
 						"%s - port change to invalid port: %i\n",
 						__func__, newport);

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <[email protected]>

commit 086fd062bc3883ae1ce4166cff5355db315ad879 upstream.

This reverts commit 13014969cbf07f18d62ceea40bd8ca8ec9d36cec.

It is reported to cause crashes on Tegra systems, so revert it for now.

---
 drivers/usb/gadget/function/u_serial.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

@@ -1393,10 +1393,6 @@ void gserial_disconnect(struct gserial *
 	/* REVISIT as above: how best to track this? */
 	port->port_line_coding = gser->port_line_coding;
 
-	/* disable endpoints, aborting down any active I/O */
-	usb_ep_disable(gser->out);
-	usb_ep_disable(gser->in);
-
 	port->port_usb = NULL;
 	gser->ioport = NULL;
 	if (port->port.count > 0) {

@@ -1408,6 +1404,10 @@ void gserial_disconnect(struct gserial *
 	spin_unlock(&port->port_lock);
 	spin_unlock_irqrestore(&serial_port_lock, flags);
 
+	/* disable endpoints, aborting down any active I/O */
+	usb_ep_disable(gser->out);
+	usb_ep_disable(gser->in);
+
 	/* finally, free any unused/unusable I/O buffers */
 	spin_lock_irqsave(&port->port_lock, flags);
 	if (port->port.count == 0)

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lianqin Hu <[email protected]>

commit ad5b205f9e022b407d91f952faddd05718be2866 upstream.

Audio control requests that sets sampling frequency sometimes fail on this card. Adding delay between control messages eliminates that problem.

usb 1-1: New USB device found, idVendor=0d8c, idProduct=0014 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB Audio Device
usb 1-1: Manufacturer: C-Media Electronics Inc.

---
 sound/usb/quirks.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -1836,6 +1836,8 @@ static const struct usb_audio_quirk_flag
 		   QUIRK_FLAG_CTL_MSG_DELAY_1M),
 	DEVICE_FLG(0x0c45, 0x6340, /* Sonix HD USB Camera */
 		   QUIRK_FLAG_GET_SAMPLE_RATE),
+	DEVICE_FLG(0x0d8c, 0x0014, /* USB Audio Device */
+		   QUIRK_FLAG_CTL_MSG_DELAY_1M),
 	DEVICE_FLG(0x0ecb, 0x205c, /* JBL Quantum610 Wireless */
 		   QUIRK_FLAG_FIXED_RATE),
 	DEVICE_FLG(0x0ecb, 0x2069, /* JBL Quantum810 Wireless */

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mark Pearson <[email protected]>

commit 907bc9268a5a9f823ffa751957a5c1dd59f83f42 upstream.

Microsoft defined Meta+Shift+F23 as the Copilot shortcut instead of a dedicated keycode, and multiple vendors have their keyboards emit this sequence in response to users pressing a dedicated "Copilot" key. Unfortunately the default keymap table in atkbd does not map scancode 0x6e (F23) and so the key combination does not work even if userspace is ready to handle it.

Because this behavior is common between multiple vendors and the scancode is currently unused map 0x6e to keycode 193 (KEY_F23) so that key sequence is generated properly.

MS documentation for the scan code:
https://learn.microsoft.com/en-us/windows/win32/inputdev/about-keyboard-input#scan-codes
Confirmed on Lenovo, HP and Dell machines by Canonical. Tested on Lenovo T14s G6 AMD.

---
 drivers/input/keyboard/atkbd.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -90,7 +90,7 @@ static const unsigned short atkbd_set2_k
 	  0, 46, 45, 32, 18,  5,  4, 95,  0, 57, 47, 33, 20, 19,  6,183,
 	  0, 49, 48, 35, 34, 21,  7,184,  0,  0, 50, 36, 22,  8,  9,185,
 	  0, 51, 37, 23, 24, 11, 10,  0,  0, 52, 53, 38, 39, 25, 12,  0,
-	  0, 89, 40,  0, 26, 13,  0,  0, 58, 54, 28, 27,  0, 43,  0, 85,
+	  0, 89, 40,  0, 26, 13,  0,193, 58, 54, 28, 27,  0, 43,  0, 85,
 	  0, 86, 91, 90, 92,  0, 14, 94,  0, 79,124, 75, 71,121,  0,  0,
 	 82, 83, 80, 76, 77, 72,  1, 69, 87, 78, 81, 74, 55, 73, 70, 99,
 

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nilton Perim Neto <[email protected]>

commit e4940fe6322c851659c17852b671c6e7b1aa9f56 upstream.

Although it mimics the Microsoft's VendorID, it is in fact a clone. Taking into account that the original Microsoft Receiver is not being manufactured anymore, this drive can solve dpad issues encontered by those who still use the original 360 Wireless controller but are using a receiver clone.

---
 drivers/input/joystick/xpad.c |    1 +
 1 file changed, 1 insertion(+)

@@ -129,6 +129,7 @@ static const struct xpad_device {
 	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", 0, XTYPE_XBOX360 },
 	{ 0x045e, 0x028f, "Microsoft X-Box 360 pad v2", 0, XTYPE_XBOX360 },
 	{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
+	{ 0x045e, 0x02a9, "Xbox 360 Wireless Receiver (Unofficial)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
 	{ 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
 	{ 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE },
 	{ 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", 0, XTYPE_XBOXONE },

5.15-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jack Greiner <[email protected]>

commit 222f3390c15c4452a9f7e26f5b7d9138e75d00d5 upstream.

Add Wooting Two HE (ARM) to the list of supported devices.

---
 drivers/input/joystick/xpad.c |    1 +
 1 file changed, 1 insertion(+)

@@ -349,6 +349,7 @@ static const struct xpad_device {
 	{ 0x31e3, 0x1200, "Wooting Two", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1210, "Wooting Lekker", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1220, "Wooting Two HE", 0, XTYPE_XBOX360 },
+	{ 0x31e3, 0x1230, "Wooting Two HE (ARM)", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1300, "Wooting 60HE (AVR)", 0, XTYPE_XBOX360 },
 	{ 0x31e3, 0x1310, "Wooting 60HE (ARM)", 0, XTYPE_XBOX360 },
 	{ 0x3285, 0x0607, "Nacon GC-100", 0, XTYPE_XBOX360 },

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:

Florian

All tests passing for Tegra ...

Test results for stable-v5.15:

    10 builds:	10 pass, 0 fail
    26 boots:	26 pass, 0 fail
    101 tests:	101 pass, 0 fail

Linux version: 5.15.178-rc1-gcd260dae49a3
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000,
                tegra20-ventana, tegra210-p2371-2180,
                tegra210-p3450-0000, tegra30-cardhu-a04

Jon

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 5.15.178-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git commit: cd260dae49a375098c2120ff1618e6bdf874791d
* git describe: v5.15.177-25-gcd260dae49a3
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.177-25-gcd260dae49a3

## Test Regressions (compared to v5.15.174-52-g11de5dde6ebe)

## Metric Regressions (compared to v5.15.174-52-g11de5dde6ebe)

## Test Fixes (compared to v5.15.174-52-g11de5dde6ebe)

## Metric Fixes (compared to v5.15.174-52-g11de5dde6ebe)

## Test result summary
total: 61427, pass: 41406, fail: 6650, skip: 12892, xfail: 479

## Build Summary
* arc: 6 total, 5 passed, 1 failed
* arm: 105 total, 105 passed, 0 failed
* arm64: 32 total, 32 passed, 0 failed
* i386: 25 total, 24 passed, 1 failed
* mips: 25 total, 22 passed, 3 failed
* parisc: 4 total, 4 passed, 0 failed
* powerpc: 25 total, 24 passed, 1 failed
* riscv: 10 total, 10 passed, 0 failed
* s390: 12 total, 11 passed, 1 failed
* sh: 12 total, 10 passed, 2 failed
* sparc: 8 total, 7 passed, 1 failed
* x86_64: 28 total, 28 passed, 0 failed

## Test suites summary
* boot
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-exec
* kselftest-filesystems
* kselftest-filesystems-binderfs
* kselftest-filesystems-epoll
* kselftest-firmware
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-kcmp
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-mincore
* kselftest-mqueue
* kselftest-net
* kselftest-net-mptcp
* kselftest-openat2
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-tc-testing
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user_events
* kselftest-vDSO
* kselftest-x86
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-build-clang
* log-parser-build-gcc
* log-parser-test
* ltp-capability
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-filecaps
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-hugetlb
* ltp-ipc
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture

--
Linaro LKFT
https://lkft.linaro.org

OVERVIEW

Builds: 38 passed, 0 failed

Boot tests: 498 passed, 0 failed

CI systems: broonie, maestro

REVISION

    Commit
        name: v5.15.177-25-gcd260dae49a3
        hash: cd260dae49a375098c2120ff1618e6bdf874791d
    Checked out from
        https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y

BUILDS

No build failures found

BOOT TESTS

No boot failures found

See complete and up-to-date report at:

    https://kcidb.kernelci.org/d/revision/revision?orgId=1&var-git_commit_hash=cd260dae49a375098c2120ff1618e6bdf874791d&var-patchset_hash=

Thanks,
KernelCI team

No Problem seen on x86_64 and aarch64 platforms with our testing.

Thanks,
Vijay

The kernel, bpf tool, perf tool, and kselftest builds fine for v5.15.178-rc1 on x86 and arm64 Azure VM.

Thanks,
Hardik