leds: pca963x: Add support for PCA962x chips
Subsystems (2)
PATCH 1/2 leds: pca963x: Add support for PCA962x chips
The PCA962x family shares the same I2C register layout and functionality. This adds support for the following chips:
PCA9623 4-channel
PCA9624 8-channel
PCA9622 16-channel
PCA9626 24-channel
Tested only the PCA9624. Other devices based on datasheet information.
---
drivers/leds/Kconfig | 8 ++++---- drivers/leds/leds-pca963x.c | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 40 insertions(+), 4 deletions(-)
drivers/leds/Kconfig +4 -4
@@ -497,13 +497,13 @@ config LEDS_PCA955X_GPIO config LEDS_PCA963X - tristate "LED support for PCA963x I2C chip" + tristate "LED support for PCA962x and PCA963x I2C chips" depends on LEDS_CLASS depends on I2C help - This option enables support for LEDs connected to the PCA963x - LED driver chip accessed via the I2C bus. Supported - devices include PCA9633 and PCA9634 + This option enables support for LEDs connected to the PCA96xx + LED driver chip accessed via the I2C bus. Supported devices: + PCA9622, PCA9623, PCA9624, PCA9626, PCA9633, PCA9634, PCA9635. config LEDS_WM831X_STATUS tristate "LED support for status LEDs on WM831x PMICs"
drivers/leds/leds-pca963x.c +36 -0
@@ -48,6 +48,10 @@#define PCA963X_PWM_BASE 0x02enum pca963x_type { + pca9622, + pca9623, + pca9624, + pca9626, pca9633, pca9634, pca9635,
@@ -62,6 +66,30 @@ struct pca963x_chipdef { };static struct pca963x_chipdef pca963x_chipdefs[] = { + [pca9622] = { + .grppwm =0x12 , + .grpfreq =0x13 , + .ledout_base =0x14 , + .n_leds =16 , + }, + [pca9623] = { + .grppwm =0x6 , + .grpfreq =0x7 , + .ledout_base =0x8 , + .n_leds =4 , + }, + [pca9624] = { + .grppwm =0xa , + .grpfreq =0xb , + .ledout_base =0xc , + .n_leds =8 , + }, + [pca9626] = { + .grppwm =0x1a , + .grpfreq =0x1b , + .ledout_base =0x1d , + .n_leds =24 , + }, [pca9633] = { .grppwm =0x6 , .grpfreq =0x7 ,
@@ -87,6 +115,10 @@ static struct pca963x_chipdef pca963x_chipdefs[] = {#define PCA963X_BLINK_PERIOD_MAX 10667static const struct i2c_device_id pca963x_id[] = { + {"pca9622" , pca9622 }, + {"pca9623" , pca9623 }, + {"pca9624" , pca9624 }, + {"pca9626" , pca9626 }, {"pca9632" , pca9633 }, {"pca9633" , pca9633 }, {"pca9634" , pca9634 },
@@ -363,6 +395,10 @@ static int pca963x_register_leds(struct i2c_client *client, }static const struct of_device_id of_pca963x_match[] = { + { .compatible ="nxp,pca9622" , }, + { .compatible ="nxp,pca9623" , }, + { .compatible ="nxp,pca9624" , }, + { .compatible ="nxp,pca9626" , }, { .compatible ="nxp,pca9632" , }, { .compatible ="nxp,pca9633" , }, { .compatible ="nxp,pca9634" , },
Signature · 1 line
2.17.1
PATCH 2/2 dt-bindings: leds: pca963x: Add support for PCA962x chips
The PCA962x family shares the same I2C register layout and functionality. This adds support for the following chips:
PCA9623 4-channel
PCA9624 8-channel
PCA9622 16-channel
PCA9626 24-channel
Tested only the PCA9624. Other devices based on datasheet information.
---
Documentation/devicetree/bindings/leds/leds-pca9532.txt | 4 ++++ 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/leds/leds-pca9532.txt +4 -0
@@ -5,6 +5,10 @@ The PWM support 256 steps. Required properties: - compatible: + "nxp,pca9522" + "nxp,pca9523" + "nxp,pca9524" + "nxp,pca9526" "nxp,pca9530" "nxp,pca9531" "nxp,pca9532"
Signature · 1 line
2.17.1
Re: [PATCH 2/2] dt-bindings: leds: pca963x: Add support for PCA962x chips
Quoted 7 lines · Mike Looijmans
The PCA962x family shares the same I2C register layout and functionality. This adds support for the following chips:
PCA9623 4-channel
PCA9624 8-channel
PCA9622 16-channel
PCA9626 24-channel
Quoted 9 lines
Tested only the PCA9624. Other devices based on datasheet information.
Signed-off-by Mike Looijmans <[email protected]>---
Documentation/devicetree/bindings/leds/leds-pca9532.txt | 4 ++++ 1 file changed, 4 insertions(+)
Just a gentle "ping", haven't seen any feedback for quite some time. Any issues, comments?
Met vriendelijke groet / kind regards,
Mike Looijmans
System Expert
TOPIC Embedded Products B.V.
Materiaalweg 4, 5681 RJ Best
The Netherlands
T: +31 (0) 499 33 69 69
E: [email protected]
W: www.topic.nl
Please consider the environment before printing this e-mail
Quoted 106 lines · Mike Looijmans
The PCA962x family shares the same I2C register layout and functionality. This adds support for the following chips:
PCA9623 4-channel
PCA9624 8-channel
PCA9622 16-channel
PCA9626 24-channelTested only the PCA9624. Other devices based on datasheet information.
Signed-off-by Mike Looijmans <[email protected]>---
drivers/leds/Kconfig | 8 ++++---- drivers/leds/leds-pca963x.c | 36 ++++++++++++++++++++++++++++++++++++ 2 files changed, 40 insertions(+), 4 deletions(-)drivers/leds/Kconfig +4
-4@@ -497,13 +497,13 @@ config LEDS_PCA955X_GPIO config LEDS_PCA963X - tristate "LED support for PCA963x I2C chip" + tristate "LED support for PCA962x and PCA963x I2C chips" depends on LEDS_CLASS depends on I2C help - This option enables support for LEDs connected to the PCA963x - LED driver chip accessed via the I2C bus. Supported - devices include PCA9633 and PCA9634 + This option enables support for LEDs connected to the PCA96xx + LED driver chip accessed via the I2C bus. Supported devices: + PCA9622, PCA9623, PCA9624, PCA9626, PCA9633, PCA9634, PCA9635. config LEDS_WM831X_STATUS tristate "LED support for status LEDs on WM831x PMICs"drivers/leds/leds-pca963x.c +36
-0@@ -48,6 +48,10 @@#define PCA963X_PWM_BASE 0x02enum pca963x_type { + pca9622, + pca9623, + pca9624, + pca9626, pca9633, pca9634, pca9635,@@ -62,6 +66,30 @@ struct pca963x_chipdef { };static struct pca963x_chipdef pca963x_chipdefs[] = { + [pca9622] = { + .grppwm =0x12 , + .grpfreq =0x13 , + .ledout_base =0x14 , + .n_leds =16 , + }, + [pca9623] = { + .grppwm =0x6 , + .grpfreq =0x7 , + .ledout_base =0x8 , + .n_leds =4 , + }, + [pca9624] = { + .grppwm =0xa , + .grpfreq =0xb , + .ledout_base =0xc , + .n_leds =8 , + }, + [pca9626] = { + .grppwm =0x1a , + .grpfreq =0x1b , + .ledout_base =0x1d , + .n_leds =24 , + }, [pca9633] = { .grppwm =0x6 , .grpfreq =0x7 ,@@ -87,6 +115,10 @@ static struct pca963x_chipdef pca963x_chipdefs[] = {#define PCA963X_BLINK_PERIOD_MAX 10667static const struct i2c_device_id pca963x_id[] = { + {"pca9622" , pca9622 }, + {"pca9623" , pca9623 }, + {"pca9624" , pca9624 }, + {"pca9626" , pca9626 }, {"pca9632" , pca9633 }, {"pca9633" , pca9633 }, {"pca9634" , pca9634 },@@ -363,6 +395,10 @@ static int pca963x_register_leds(struct i2c_client *client, }static const struct of_device_id of_pca963x_match[] = { + { .compatible ="nxp,pca9622" , }, + { .compatible ="nxp,pca9623" , }, + { .compatible ="nxp,pca9624" , }, + { .compatible ="nxp,pca9626" , }, { .compatible ="nxp,pca9632" , }, { .compatible ="nxp,pca9633" , }, { .compatible ="nxp,pca9634" , },
Signature · 1 line
Mike Looijmans