Skip to contentSkip to conversation

net-timestamp: bpf extension to equip applications transparently

PATCH Superseded Jason Xing 4 participants 48 messages Dec 7, 2024 – Jan 10, 2025

Subsystems (8)

v4 of 13 Superseded Latest is v13 →

lore
Share & tools
lore

Jason Xing

author
#0 lore raw

v4 cover net-timestamp: bpf extension to equip applications transparently

From: Jason Xing <[email protected]>

In August, I planned to extend SO_TIMESTMAMPING feature by using tracepoint to print information (say, tstamp) so that we can transparently equip applications with this feature and require no modification in user side.

Later, we discussed at netconf and agreed that we can use bpf for better extension, which is mainly suggested by John Fastabend and Willem de Bruijn. After sending the a few series in recent days, Martin KaFai Lau provided many valuable advices. Many thanks here!

I post this series to see if we have a better solution to extend. My feeling is BPF is a good place to provide a way to add timestamping by administrators, without having to rebuild applications. After this series, we could step by step implement more advanced functions/flags already in SO_TIMESTAMPING feature for bpf extension.

This approach mostly relies on existing SO_TIMESTAMPING feature, users only needs to pass certain flags through bpf_setsocktop() to a separate tsflags. For TX timestamps, they will be printed during generation phases.

In this series, I support foundamental codes for TCP.

---
v4
// Sorry for delaying almost one month :(

1. introduce sk->sk_bpf_cb_flags to let user use bpf_setsockopt() (Martin)
2. introduce SKBTX_BPF to enable the bpf SO_TIMESTAMPING feature (Martin)
3. introduce bpf map in tests (Martin)
4. I choose to make this series as simple as possible, so I only support most cases in the tx path for TCP protocol.

v3

1. support UDP proto by introducing a new generation point.
2. for OPT_ID, introducing sk_tskey_bpf_offset to compute the delta between the current socket key and bpf socket key. It is desiged for UDP, which also applies to TCP.
3. support bpf_getsockopt()
4. use cgroup static key instead.
5. add one simple bpf selftest to show how it can be used.
6. remove the rx support from v2 because the number of patches could exceed the limit of one series.

V2

1. Introduce tsflag requestors so that we are able to extend more in the future. Besides, it enables TX flags for bpf extension feature separately without breaking users. It is suggested by Vadim Fedorenko.
2. introduce a static key to control the whole feature. (Willem)
3. Open the gate of bpf_setsockopt for the SO_TIMESTAMPING feature in some TX/RX cases, not all the cases.

Jason Xing (11):
net-timestamp: add support for bpf_setsockopt()
net-timestamp: prepare for bpf prog use
net-timestamp: reorganize in skb_tstamp_tx_output()
net-timestamp: support SCM_TSTAMP_SCHED for bpf extension
net-timestamp: support SCM_TSTAMP_SND for bpf extension
net-timestamp: support SCM_TSTAMP_ACK for bpf extension
net-timestamp: support hwtstamp print for bpf extension
net-timestamp: make TCP tx timestamp bpf extension work
net-timestamp: introduce cgroup lock to avoid affecting non-bpf cases
net-timestamp: export the tskey for TCP bpf extension
bpf: add simple bpf tests in the tx path for so_timstamping feature

 include/linux/skbuff.h                        |  10 +-
 include/net/sock.h                            |  16 +++
 include/net/tcp.h                             |   3 +-
 include/uapi/linux/bpf.h                      |  23 +++
 net/core/dev.c                                |   3 +-
 net/core/filter.c                             |  22 +++
 net/core/skbuff.c                             |  88 +++++++++++-
 net/core/sock.c                               |  17 +++
 net/ipv4/tcp.c                                |  10 ++
 net/ipv4/tcp_input.c                          |   3 +-
 net/ipv4/tcp_output.c                         |   5 +
 tools/include/uapi/linux/bpf.h                |  16 +++
 .../bpf/prog_tests/so_timestamping.c          |  97 +++++++++++++
 .../selftests/bpf/progs/so_timestamping.c     | 135 ++++++++++++++++++
 14 files changed, 435 insertions(+), 13 deletions(-)
 create mode 100644 tools/testing/selftests/bpf/prog_tests/so_timestamping.c
 create mode 100644 tools/testing/selftests/bpf/progs/so_timestamping.c
Signature · 1 line
2.37.3
author
#1 lore raw

PATCH v4 1/11 net-timestamp: add support for bpf_setsockopt()

From: Jason Xing <[email protected]>

Users can write the following code to enable the bpf extension:
bpf_setsockopt(skops, SOL_SOCKET, SK_BPF_CB_FLAGS, &flags, sizeof(flags));

---
 include/net/sock.h             |  7 +++++++
 include/uapi/linux/bpf.h       |  8 ++++++++
 net/core/filter.c              | 22 ++++++++++++++++++++++
 tools/include/uapi/linux/bpf.h |  1 +
 4 files changed, 38 insertions(+)
include/net/sock.h +7 -0
index 7464e9f9f47c..0dd464ba9e46 100644
@@ -303,6 +303,7 @@ struct sk_filter;
   *	@sk_stamp: time stamp of last packet received
   *	@sk_stamp_seq: lock for accessing sk_stamp on 32 bit architectures only
   *	@sk_tsflags: SO_TIMESTAMPING flags
+  *	@sk_bpf_cb_flags: used for bpf_setsockopt
   *	@sk_use_task_frag: allow sk_page_frag() to use current->task_frag.
   *			   Sockets that can be used under memory reclaim should
   *			   set this to false.
@@ -445,6 +446,12 @@ struct sock {
 	u32			sk_reserved_mem;
 	int			sk_forward_alloc;
 	u32			sk_tsflags;
+#ifdef CONFIG_BPF_SYSCALL
+#define SK_BPF_CB_FLAG_TEST(SK, FLAG) ((SK)->sk_bpf_cb_flags & (FLAG))
+	u32			sk_bpf_cb_flags;
+#else
+#define SK_BPF_CB_FLAG_TEST(SK, FLAG) 0
+#endif
 	__cacheline_group_end(sock_write_rxtx);
 
 	__cacheline_group_begin(sock_write_tx);
include/uapi/linux/bpf.h +8 -0
index 4162afc6b5d0..e629e09b0b31 100644
@@ -6903,6 +6903,13 @@ enum {
 	BPF_SOCK_OPS_ALL_CB_FLAGS       = 0x7F,
 };
 
+/* Definitions for bpf_sk_cb_flags */
+enum {
+	SK_BPF_CB_TX_TIMESTAMPING	= 1<<0,
+	SK_BPF_CB_MASK			= (SK_BPF_CB_TX_TIMESTAMPING - 1) |
+					   SK_BPF_CB_TX_TIMESTAMPING
+};
+
 /* List of known BPF sock_ops operators.
  * New entries can only be added at the end
  */
@@ -7081,6 +7088,7 @@ enum {
 	TCP_BPF_SYN_IP		= 1006, /* Copy the IP[46] and TCP header */
 	TCP_BPF_SYN_MAC         = 1007, /* Copy the MAC, IP[46], and TCP header */
 	TCP_BPF_SOCK_OPS_CB_FLAGS = 1008, /* Get or Set TCP sock ops flags */
+	SK_BPF_CB_FLAGS		= 1009, /* Used to set socket bpf flags */
 };
 
 enum {
net/core/filter.c +22 -0
index 6625b3f563a4..f7e9f88e09b1 100644
@@ -5214,6 +5214,24 @@ static const struct bpf_func_proto bpf_get_socket_uid_proto = {
 	.arg1_type      = ARG_PTR_TO_CTX,
 };
 
+static int sk_bpf_set_cb_flags(struct sock *sk, sockptr_t optval, bool getopt)
+{
+	int sk_bpf_cb_flags;
+
+	if (getopt)
+		return -EINVAL;
+
+	if (copy_from_sockptr(&sk_bpf_cb_flags, optval, sizeof(sk_bpf_cb_flags)))
+		return -EFAULT;
+
+	if (sk_bpf_cb_flags & ~SK_BPF_CB_MASK)
+		return -EINVAL;
+
+	sk->sk_bpf_cb_flags = sk_bpf_cb_flags;
+
+	return 0;
+}
+
 static int sol_socket_sockopt(struct sock *sk, int optname,
 			      char *optval, int *optlen,
 			      bool getopt)
@@ -5230,6 +5248,7 @@ static int sol_socket_sockopt(struct sock *sk, int optname,
 	case SO_MAX_PACING_RATE:
 	case SO_BINDTOIFINDEX:
 	case SO_TXREHASH:
+	case SK_BPF_CB_FLAGS:
 		if (*optlen != sizeof(int))
 			return -EINVAL;
 		break;
@@ -5239,6 +5258,9 @@ static int sol_socket_sockopt(struct sock *sk, int optname,
 		return -EINVAL;
 	}
 
+	if (optname == SK_BPF_CB_FLAGS)
+		return sk_bpf_set_cb_flags(sk, KERNEL_SOCKPTR(optval), getopt);
+
 	if (getopt) {
 		if (optname == SO_BINDTODEVICE)
 			return -EINVAL;
tools/include/uapi/linux/bpf.h +1 -0
index 4162afc6b5d0..6b0a5b787b12 100644
@@ -7081,6 +7081,7 @@ enum {
 	TCP_BPF_SYN_IP		= 1006, /* Copy the IP[46] and TCP header */
 	TCP_BPF_SYN_MAC         = 1007, /* Copy the MAC, IP[46], and TCP header */
 	TCP_BPF_SOCK_OPS_CB_FLAGS = 1008, /* Get or Set TCP sock ops flags */
+	SK_BPF_CB_FLAGS		= 1009, /* Used to set socket bpf flags */
 };
 
 enum {
Signature · 1 line
2.37.3
#2 lore raw

Re: [PATCH net-next v4 01/11] net-timestamp: add support for bpf_setsockopt()

kernel test robot noticed the following build errors:

Hi Jason,

kernel test robot noticed the following build errors:

[auto build test ERROR on net-next/main]

url:    https://github.com/intel-lab-lkp/linux/commits/Jason-Xing/net-timestamp-add-support-for-bpf_setsockopt/20241208-014111
base:   net-next/main
patch link:    https://lore.kernel.org/r/20241207173803.90744-2-kerneljasonxing%40gmail.com
patch subject: [PATCH net-next v4 01/11] net-timestamp: add support for bpf_setsockopt()
config: i386-buildonly-randconfig-001-20241208 (https://download.01.org/0day-ci/archive/20241208/[email protected]/config)
compiler: gcc-12 (Debian 12.2.0-14) 12.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241208/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All errors (new ones prefixed by >>):

net/core/filter.c: In function 'sk_bpf_set_cb_flags':

>> net/core/filter.c:5232:11: error: 'struct sock' has no member named 'sk_bpf_cb_flags'
    5232 |         sk->sk_bpf_cb_flags = sk_bpf_cb_flags;
         |           ^~

vim +5232 net/core/filter.c

5218
5219 static int sk_bpf_set_cb_flags(struct sock *sk, sockptr_t optval, bool getopt)
5220 {
5221 int sk_bpf_cb_flags;
5222
5223 if (getopt)
5224 return -EINVAL;
5225
5226 if (copy_from_sockptr(&sk_bpf_cb_flags, optval, sizeof(sk_bpf_cb_flags)))
5227 return -EFAULT;
5228
5229 if (sk_bpf_cb_flags & ~SK_BPF_CB_MASK)
5230 return -EINVAL;
5231

> 5232		sk->sk_bpf_cb_flags = sk_bpf_cb_flags;

5233
5234 return 0;
5235 }
5236

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
#3 lore raw

Re: [PATCH net-next v4 01/11] net-timestamp: add support for bpf_setsockopt()

In reply to Jason Xing
kernel test robot noticed the following build errors:

Hi Jason,

kernel test robot noticed the following build errors:

[auto build test ERROR on net-next/main]

url:    https://github.com/intel-lab-lkp/linux/commits/Jason-Xing/net-timestamp-add-support-for-bpf_setsockopt/20241208-014111
base:   net-next/main
patch link:    https://lore.kernel.org/r/20241207173803.90744-2-kerneljasonxing%40gmail.com
patch subject: [PATCH net-next v4 01/11] net-timestamp: add support for bpf_setsockopt()
config: x86_64-buildonly-randconfig-004-20241208 (https://download.01.org/0day-ci/archive/20241208/[email protected]/config)
compiler: clang version 19.1.3 (https://github.com/llvm/llvm-project ab51eccf88f5321e7c60591c5546b254b6afab99)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241208/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All errors (new ones prefixed by >>):

In file included from net/core/filter.c:21:
In file included from include/linux/bpf_verifier.h:7:
In file included from include/linux/bpf.h:21:
In file included from include/linux/kallsyms.h:13:
In file included from include/linux/mm.h:2223:
include/linux/vmstat.h:518:36: warning: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Wenum-enum-conversion]

     518 |         return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_"
         |                               ~~~~~~~~~~~ ^ ~~~
   net/core/filter.c:1726:30: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
    1726 |         .arg3_type      = ARG_PTR_TO_MEM | MEM_RDONLY,
         |                           ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~
   net/core/filter.c:2041:30: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
    2041 |         .arg1_type      = ARG_PTR_TO_MEM | PTR_MAYBE_NULL | MEM_RDONLY,
         |                           ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
   net/core/filter.c:2043:30: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
    2043 |         .arg3_type      = ARG_PTR_TO_MEM | PTR_MAYBE_NULL | MEM_RDONLY,
         |                           ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
   net/core/filter.c:2580:35: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
    2580 |         .arg2_type      = ARG_PTR_TO_MEM | PTR_MAYBE_NULL | MEM_RDONLY,
         |                           ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
   net/core/filter.c:4643:30: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
    4643 |         .arg4_type      = ARG_PTR_TO_MEM | MEM_RDONLY,
         |                           ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~
   net/core/filter.c:4657:30: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
    4657 |         .arg4_type      = ARG_PTR_TO_MEM | MEM_RDONLY,
         |                           ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~
   net/core/filter.c:4857:30: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
    4857 |         .arg2_type      = ARG_PTR_TO_MEM | MEM_RDONLY,
         |                           ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~
   net/core/filter.c:4885:30: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
    4885 |         .arg2_type      = ARG_PTR_TO_MEM | MEM_RDONLY,
         |                           ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~
   net/core/filter.c:5057:30: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
    5057 |         .arg4_type      = ARG_PTR_TO_MEM | MEM_RDONLY,
         |                           ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~
   net/core/filter.c:5071:30: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
    5071 |         .arg4_type      = ARG_PTR_TO_MEM | MEM_RDONLY,
         |                           ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~
   net/core/filter.c:5120:45: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
    5120 |         .arg1_type      = ARG_PTR_TO_BTF_ID_SOCK_COMMON | PTR_MAYBE_NULL,
         |                           ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
>> net/core/filter.c:5232:6: error: no member named 'sk_bpf_cb_flags' in 'struct sock'
    5232 |         sk->sk_bpf_cb_flags = sk_bpf_cb_flags;
         |         ~~  ^

net/core/filter.c:5577:30: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
5577 | .arg4_type = ARG_PTR_TO_MEM | MEM_RDONLY,
| ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~
net/core/filter.c:5611:30: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
5611 | .arg4_type = ARG_PTR_TO_MEM | MEM_RDONLY,
| ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~
net/core/filter.c:5645:30: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
5645 | .arg4_type = ARG_PTR_TO_MEM | MEM_RDONLY,
| ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~
net/core/filter.c:5679:30: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
5679 | .arg4_type = ARG_PTR_TO_MEM | MEM_RDONLY,
| ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~
net/core/filter.c:5854:30: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
5854 | .arg2_type = ARG_PTR_TO_MEM | MEM_RDONLY,
| ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~
net/core/filter.c:6391:46: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
6391 | .arg3_type = ARG_PTR_TO_FIXED_SIZE_MEM | MEM_WRITE | MEM_ALIGNED,
| ~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~
net/core/filter.c:6403:46: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
6403 | .arg3_type = ARG_PTR_TO_FIXED_SIZE_MEM | MEM_WRITE | MEM_ALIGNED,
| ~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~~~~~~~~~
net/core/filter.c:6489:30: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
6489 | .arg3_type = ARG_PTR_TO_MEM | MEM_RDONLY,
| ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~
net/core/filter.c:6499:30: warning: bitwise operation between different enumeration types ('enum bpf_arg_type' and 'enum bpf_type_flag') [-Wenum-enum-conversion]
6499 | .arg3_type = ARG_PTR_TO_MEM | MEM_RDONLY,
| ~~~~~~~~~~~~~~ ^ ~~~~~~~~~~
21 warnings and 1 error generated.

vim +5232 net/core/filter.c

5049
5050 static const struct bpf_func_proto bpf_xdp_event_output_proto = {
5051 .func = bpf_xdp_event_output,
5052 .gpl_only = true,
5053 .ret_type = RET_INTEGER,
5054 .arg1_type = ARG_PTR_TO_CTX,
5055 .arg2_type = ARG_CONST_MAP_PTR,
5056 .arg3_type = ARG_ANYTHING,

> 5057		.arg4_type	= ARG_PTR_TO_MEM | MEM_RDONLY,
  5058		.arg5_type	= ARG_CONST_SIZE_OR_ZERO,
  5059	};
  5060	
  5061	BTF_ID_LIST_SINGLE(bpf_xdp_output_btf_ids, struct, xdp_buff)
  5062	
  5063	const struct bpf_func_proto bpf_xdp_output_proto = {
  5064		.func		= bpf_xdp_event_output,
  5065		.gpl_only	= true,
  5066		.ret_type	= RET_INTEGER,
  5067		.arg1_type	= ARG_PTR_TO_BTF_ID,
  5068		.arg1_btf_id	= &bpf_xdp_output_btf_ids[0],
  5069		.arg2_type	= ARG_CONST_MAP_PTR,
  5070		.arg3_type	= ARG_ANYTHING,
  5071		.arg4_type	= ARG_PTR_TO_MEM | MEM_RDONLY,
  5072		.arg5_type	= ARG_CONST_SIZE_OR_ZERO,
  5073	};
  5074	
  5075	BPF_CALL_1(bpf_get_socket_cookie, struct sk_buff *, skb)
  5076	{
  5077		return skb->sk ? __sock_gen_cookie(skb->sk) : 0;
  5078	}
  5079	
  5080	static const struct bpf_func_proto bpf_get_socket_cookie_proto = {
  5081		.func           = bpf_get_socket_cookie,
  5082		.gpl_only       = false,
  5083		.ret_type       = RET_INTEGER,
  5084		.arg1_type      = ARG_PTR_TO_CTX,
  5085	};
  5086	
  5087	BPF_CALL_1(bpf_get_socket_cookie_sock_addr, struct bpf_sock_addr_kern *, ctx)
  5088	{
  5089		return __sock_gen_cookie(ctx->sk);
  5090	}
  5091	
  5092	static const struct bpf_func_proto bpf_get_socket_cookie_sock_addr_proto = {
  5093		.func		= bpf_get_socket_cookie_sock_addr,
  5094		.gpl_only	= false,
  5095		.ret_type	= RET_INTEGER,
  5096		.arg1_type	= ARG_PTR_TO_CTX,
  5097	};
  5098	
  5099	BPF_CALL_1(bpf_get_socket_cookie_sock, struct sock *, ctx)
  5100	{
  5101		return __sock_gen_cookie(ctx);
  5102	}
  5103	
  5104	static const struct bpf_func_proto bpf_get_socket_cookie_sock_proto = {
  5105		.func		= bpf_get_socket_cookie_sock,
  5106		.gpl_only	= false,
  5107		.ret_type	= RET_INTEGER,
  5108		.arg1_type	= ARG_PTR_TO_CTX,
  5109	};
  5110	
  5111	BPF_CALL_1(bpf_get_socket_ptr_cookie, struct sock *, sk)
  5112	{
  5113		return sk ? sock_gen_cookie(sk) : 0;
  5114	}
  5115	
  5116	const struct bpf_func_proto bpf_get_socket_ptr_cookie_proto = {
  5117		.func		= bpf_get_socket_ptr_cookie,
  5118		.gpl_only	= false,
  5119		.ret_type	= RET_INTEGER,
  5120		.arg1_type	= ARG_PTR_TO_BTF_ID_SOCK_COMMON | PTR_MAYBE_NULL,
  5121	};
  5122	
  5123	BPF_CALL_1(bpf_get_socket_cookie_sock_ops, struct bpf_sock_ops_kern *, ctx)
  5124	{
  5125		return __sock_gen_cookie(ctx->sk);
  5126	}
  5127	
  5128	static const struct bpf_func_proto bpf_get_socket_cookie_sock_ops_proto = {
  5129		.func		= bpf_get_socket_cookie_sock_ops,
  5130		.gpl_only	= false,
  5131		.ret_type	= RET_INTEGER,
  5132		.arg1_type	= ARG_PTR_TO_CTX,
  5133	};
  5134	
  5135	static u64 __bpf_get_netns_cookie(struct sock *sk)
  5136	{
  5137		const struct net *net = sk ? sock_net(sk) : &init_net;
  5138	
  5139		return net->net_cookie;
  5140	}
  5141	
  5142	BPF_CALL_1(bpf_get_netns_cookie, struct sk_buff *, skb)
  5143	{
  5144		return __bpf_get_netns_cookie(skb && skb->sk ? skb->sk : NULL);
  5145	}
  5146	
  5147	static const struct bpf_func_proto bpf_get_netns_cookie_proto = {
  5148		.func           = bpf_get_netns_cookie,
  5149		.ret_type       = RET_INTEGER,
  5150		.arg1_type      = ARG_PTR_TO_CTX_OR_NULL,
  5151	};
  5152	
  5153	BPF_CALL_1(bpf_get_netns_cookie_sock, struct sock *, ctx)
  5154	{
  5155		return __bpf_get_netns_cookie(ctx);
  5156	}
  5157	
  5158	static const struct bpf_func_proto bpf_get_netns_cookie_sock_proto = {
  5159		.func		= bpf_get_netns_cookie_sock,
  5160		.gpl_only	= false,
  5161		.ret_type	= RET_INTEGER,
  5162		.arg1_type	= ARG_PTR_TO_CTX_OR_NULL,
  5163	};
  5164	
  5165	BPF_CALL_1(bpf_get_netns_cookie_sock_addr, struct bpf_sock_addr_kern *, ctx)
  5166	{
  5167		return __bpf_get_netns_cookie(ctx ? ctx->sk : NULL);
  5168	}
  5169	
  5170	static const struct bpf_func_proto bpf_get_netns_cookie_sock_addr_proto = {
  5171		.func		= bpf_get_netns_cookie_sock_addr,
  5172		.gpl_only	= false,
  5173		.ret_type	= RET_INTEGER,
  5174		.arg1_type	= ARG_PTR_TO_CTX_OR_NULL,
  5175	};
  5176	
  5177	BPF_CALL_1(bpf_get_netns_cookie_sock_ops, struct bpf_sock_ops_kern *, ctx)
  5178	{
  5179		return __bpf_get_netns_cookie(ctx ? ctx->sk : NULL);
  5180	}
  5181	
  5182	static const struct bpf_func_proto bpf_get_netns_cookie_sock_ops_proto = {
  5183		.func		= bpf_get_netns_cookie_sock_ops,
  5184		.gpl_only	= false,
  5185		.ret_type	= RET_INTEGER,
  5186		.arg1_type	= ARG_PTR_TO_CTX_OR_NULL,
  5187	};
  5188	
  5189	BPF_CALL_1(bpf_get_netns_cookie_sk_msg, struct sk_msg *, ctx)
  5190	{
  5191		return __bpf_get_netns_cookie(ctx ? ctx->sk : NULL);
  5192	}
  5193	
  5194	static const struct bpf_func_proto bpf_get_netns_cookie_sk_msg_proto = {
  5195		.func		= bpf_get_netns_cookie_sk_msg,
  5196		.gpl_only	= false,
  5197		.ret_type	= RET_INTEGER,
  5198		.arg1_type	= ARG_PTR_TO_CTX_OR_NULL,
  5199	};
  5200	
  5201	BPF_CALL_1(bpf_get_socket_uid, struct sk_buff *, skb)
  5202	{
  5203		struct sock *sk = sk_to_full_sk(skb->sk);
  5204		kuid_t kuid;
  5205	
  5206		if (!sk || !sk_fullsock(sk))
  5207			return overflowuid;
  5208		kuid = sock_net_uid(sock_net(sk), sk);
  5209		return from_kuid_munged(sock_net(sk)->user_ns, kuid);
  5210	}
  5211	
  5212	static const struct bpf_func_proto bpf_get_socket_uid_proto = {
  5213		.func           = bpf_get_socket_uid,
  5214		.gpl_only       = false,
  5215		.ret_type       = RET_INTEGER,
  5216		.arg1_type      = ARG_PTR_TO_CTX,
  5217	};
  5218	
  5219	static int sk_bpf_set_cb_flags(struct sock *sk, sockptr_t optval, bool getopt)
  5220	{
  5221		int sk_bpf_cb_flags;
  5222	
  5223		if (getopt)
  5224			return -EINVAL;
  5225	
  5226		if (copy_from_sockptr(&sk_bpf_cb_flags, optval, sizeof(sk_bpf_cb_flags)))
  5227			return -EFAULT;
  5228	
  5229		if (sk_bpf_cb_flags & ~SK_BPF_CB_MASK)
  5230			return -EINVAL;
  5231	
> 5232		sk->sk_bpf_cb_flags = sk_bpf_cb_flags;

5233
5234 return 0;
5235 }
5236

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
#4 lore raw

Re: [PATCH net-next v4 01/11] net-timestamp: add support for bpf_setsockopt()

In reply to Jason Xing

net/core/filter.c static const struct bpf_func_proto bpf_get_socket_uid_proto = { · line 5217

Quoted 9 lines · Jason Xing
net/core/filter.c +1 -0
index 6625b3f563a4..f7e9f88e09b1 100644
@@ -5214,6 +5214,24 @@ static const struct bpf_func_proto bpf_get_socket_uid_proto = {
  	.arg1_type      = ARG_PTR_TO_CTX,
  };
 
+static int sk_bpf_set_cb_flags(struct sock *sk, sockptr_t optval, bool getopt)

It is confusing to take a sockptr_t argument. It is called by the kernel bpf prog only. It must be from the kernel memory. Directly pass the "int sk_bpf_cb_flags" as the argument.

net/core/filter.c static const struct bpf_func_proto bpf_get_socket_uid_proto = { · line 5224

Quoted 7 lines
net/core/filter.c +7 -0
+{
+	int sk_bpf_cb_flags;
+
+	if (getopt)
+		return -EINVAL;
+
+	if (copy_from_sockptr(&sk_bpf_cb_flags, optval, sizeof(sk_bpf_cb_flags)))

It is an unnecessary copy. Directly use the "int sk_bpf_cb_flags" arg instead.

net/core/filter.c static const struct bpf_func_proto bpf_get_socket_uid_proto = { · line 5225

Quoted 1 line
net/core/filter.c +1 -0
+		return -EFAULT;

This should never happen.

Quoted 30 lines
net/core/filter.c +13 -0
+
+	if (sk_bpf_cb_flags & ~SK_BPF_CB_MASK)
+		return -EINVAL;
+
+	sk->sk_bpf_cb_flags = sk_bpf_cb_flags;
+
+	return 0;
+}
+
  static int sol_socket_sockopt(struct sock *sk, int optname,
  			      char *optval, int *optlen,
  			      bool getopt)
@@ -5230,6 +5248,7 @@ static int sol_socket_sockopt(struct sock *sk, int optname,
  	case SO_MAX_PACING_RATE:
  	case SO_BINDTOIFINDEX:
  	case SO_TXREHASH:
+	case SK_BPF_CB_FLAGS:
  		if (*optlen != sizeof(int))
  			return -EINVAL;
  		break;
@@ -5239,6 +5258,9 @@ static int sol_socket_sockopt(struct sock *sk, int optname,
  		return -EINVAL;
  	}
 
+	if (optname == SK_BPF_CB_FLAGS)
+		return sk_bpf_set_cb_flags(sk, KERNEL_SOCKPTR(optval), getopt);
+
  	if (getopt) {
  		if (optname == SO_BINDTODEVICE)
  			return -EINVAL;
author
#5 lore raw

Re: [PATCH net-next v4 01/11] net-timestamp: add support for bpf_setsockopt()

Quoted 10 lines · Martin KaFai Lau
Quoted 8 lines · Jason Xing
net/core/filter.c +0 -0
index 6625b3f563a4..f7e9f88e09b1 100644
@@ -5214,6 +5214,24 @@ static const struct bpf_func_proto bpf_get_socket_uid_proto = {
      .arg1_type      = ARG_PTR_TO_CTX,
  };
 
Quoted 5 lines

net/core/filter.c static const struct bpf_func_proto bpf_get_socket_uid_proto = { · line 5217

Quoted 1 line
net/core/filter.c +1 -0
+static int sk_bpf_set_cb_flags(struct sock *sk, sockptr_t optval, bool getopt)

It is confusing to take a sockptr_t argument. It is called by the kernel bpf prog only. It must be from the kernel memory. Directly pass the "int sk_bpf_cb_flags" as the argument.

Thanks. I will fix this.

Quoted 45 lines

net/core/filter.c static const struct bpf_func_proto bpf_get_socket_uid_proto = { · line 5224

Quoted 8 lines
net/core/filter.c +7 -0
+{
+     int sk_bpf_cb_flags;
+
+     if (getopt)
+             return -EINVAL;
+
+     if (copy_from_sockptr(&sk_bpf_cb_flags, optval, sizeof(sk_bpf_cb_flags)))

It is an unnecessary copy. Directly use the "int sk_bpf_cb_flags" arg instead.

net/core/filter.c static const struct bpf_func_proto bpf_get_socket_uid_proto = { · line 5225

Quoted 1 line
net/core/filter.c +1 -0
+             return -EFAULT;

This should never happen.

Quoted 30 lines
net/core/filter.c +13 -0
+
+     if (sk_bpf_cb_flags & ~SK_BPF_CB_MASK)
+             return -EINVAL;
+
+     sk->sk_bpf_cb_flags = sk_bpf_cb_flags;
+
+     return 0;
+}
+
  static int sol_socket_sockopt(struct sock *sk, int optname,
                            char *optval, int *optlen,
                            bool getopt)
@@ -5230,6 +5248,7 @@ static int sol_socket_sockopt(struct sock *sk, int optname,
      case SO_MAX_PACING_RATE:
      case SO_BINDTOIFINDEX:
      case SO_TXREHASH:
+     case SK_BPF_CB_FLAGS:
              if (*optlen != sizeof(int))
                      return -EINVAL;
              break;
@@ -5239,6 +5258,9 @@ static int sol_socket_sockopt(struct sock *sk, int optname,
              return -EINVAL;
      }
 
+     if (optname == SK_BPF_CB_FLAGS)
+             return sk_bpf_set_cb_flags(sk, KERNEL_SOCKPTR(optval), getopt);
+
      if (getopt) {
              if (optname == SO_BINDTODEVICE)
                      return -EINVAL;
author
#6 lore raw

PATCH v4 2/11 net-timestamp: prepare for bpf prog use

In reply to Jason Xing

From: Jason Xing <[email protected]>

Later, I would introduce three points to report some information to user space based on this.

---
 include/net/sock.h |  7 +++++++
 net/core/sock.c    | 15 +++++++++++++++
 2 files changed, 22 insertions(+)
include/net/sock.h +7 -0
index 0dd464ba9e46..f88a00108a2f 100644
@@ -2920,6 +2920,13 @@ int sock_set_timestamping(struct sock *sk, int optname,
 			  struct so_timestamping timestamping);
 
 void sock_enable_timestamps(struct sock *sk);
+#if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_SYSCALL)
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op);
+#else
+static inline void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+{
+}
+#endif
 void sock_no_linger(struct sock *sk);
 void sock_set_keepalive(struct sock *sk);
 void sock_set_priority(struct sock *sk, u32 priority);
net/core/sock.c +15 -0
index 74729d20cd00..79cb5c74c76c 100644
@@ -941,6 +941,21 @@ int sock_set_timestamping(struct sock *sk, int optname,
 	return 0;
 }
 
+#if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_SYSCALL)
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+{
+	struct bpf_sock_ops_kern sock_ops;
+
+	sock_owned_by_me(sk);
+
+	memset(&sock_ops, 0, offsetof(struct bpf_sock_ops_kern, temp));
+	sock_ops.op = op;
+	sock_ops.is_fullsock = 1;
+	sock_ops.sk = sk;
+	__cgroup_bpf_run_filter_sock_ops(sk, &sock_ops, CGROUP_SOCK_OPS);
+}
+#endif
+
 void sock_set_keepalive(struct sock *sk)
 {
 	lock_sock(sk);
Signature · 1 line
2.37.3
#7 lore raw

Re: [PATCH net-next v4 02/11] net-timestamp: prepare for bpf prog use

Quoted 34 lines · Jason Xing

From: Jason Xing <[email protected]>

Later, I would introduce three points to report some information to user space based on this.

---
  include/net/sock.h |  7 +++++++
  net/core/sock.c    | 15 +++++++++++++++
  2 files changed, 22 insertions(+)
include/net/sock.h +7 -0
index 0dd464ba9e46..f88a00108a2f 100644
@@ -2920,6 +2920,13 @@ int sock_set_timestamping(struct sock *sk, int optname,
  			  struct so_timestamping timestamping);
 
  void sock_enable_timestamps(struct sock *sk);
+#if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_SYSCALL)
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op);
+#else
+static inline void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+{
+}
+#endif
  void sock_no_linger(struct sock *sk);
  void sock_set_keepalive(struct sock *sk);
  void sock_set_priority(struct sock *sk, u32 priority);
net/core/sock.c +0 -0
index 74729d20cd00..79cb5c74c76c 100644

net/core/sock.c int sock_set_timestamping(struct sock *sk, int optname, · line 949

Quoted 9 lines
net/core/sock.c +6 -0
@@ -941,6 +941,21 @@ int sock_set_timestamping(struct sock *sk, int optname,
  	return 0;
  }
 
+#if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_SYSCALL)
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+{
+	struct bpf_sock_ops_kern sock_ops;
+
+	sock_owned_by_me(sk);

I don't think this can be assumed in the time stamping callback.

To remove this assumption for sockops, I believe it needs to stop the bpf prog from calling a few bpf helpers. In particular, the bpf_sock_ops_cb_flags_set and bpf_sock_ops_setsockopt. This should be easy by asking the helpers to check the "u8 op" in "struct bpf_sock_ops_kern *".

I just noticed a trickier one, sockops bpf prog can write to sk->sk_txhash. The same should go for reading from sk. Also, sockops prog assumes a fullsock sk is a tcp_sock which also won't work for the udp case. A quick thought is to do something similar to is_fullsock. May be repurpose the is_fullsock somehow or a new u8 is needed. Take a look at SOCK_OPS_{GET,SET}_FIELD. It avoids writing/reading the sk when is_fullsock is false.

This is a signal that the existing sockops interface has already seen better days. I hope not too many fixes like these are needed to get tcp/udp timestamping to work.

net/core/sock.c int sock_set_timestamping(struct sock *sk, int optname, · line 953

Quoted 4 lines
net/core/sock.c +4 -0
+
+	memset(&sock_ops, 0, offsetof(struct bpf_sock_ops_kern, temp));
+	sock_ops.op = op;
+	sock_ops.is_fullsock = 1;

I don't think we can assume it is always is_fullsock either.

net/core/sock.c int sock_set_timestamping(struct sock *sk, int optname, · line 955

Quoted 2 lines
net/core/sock.c +2 -0
+	sock_ops.sk = sk;
+	__cgroup_bpf_run_filter_sock_ops(sk, &sock_ops, CGROUP_SOCK_OPS);

Same here. sk may not be fullsock. BPF_CGROUP_RUN_PROG_SOCK_OPS(&sock_ops) is needed.

[ I will continue the rest of the set later. ]

Quoted 6 lines
net/core/sock.c +3 -0
+}
+#endif
+
  void sock_set_keepalive(struct sock *sk)
  {
  	lock_sock(sk);
author
#8 lore raw

Re: [PATCH net-next v4 02/11] net-timestamp: prepare for bpf prog use

Quoted 39 lines · Martin KaFai Lau
Quoted 37 lines · Jason Xing

From: Jason Xing <[email protected]>

Later, I would introduce three points to report some information to user space based on this.

---
  include/net/sock.h |  7 +++++++
  net/core/sock.c    | 15 +++++++++++++++
  2 files changed, 22 insertions(+)
include/net/sock.h +7 -0
index 0dd464ba9e46..f88a00108a2f 100644
@@ -2920,6 +2920,13 @@ int sock_set_timestamping(struct sock *sk, int optname,
                        struct so_timestamping timestamping);
 
  void sock_enable_timestamps(struct sock *sk);
+#if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_SYSCALL)
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op);
+#else
+static inline void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+{
+}
+#endif
  void sock_no_linger(struct sock *sk);
  void sock_set_keepalive(struct sock *sk);
  void sock_set_priority(struct sock *sk, u32 priority);
net/core/sock.c +0 -0
index 74729d20cd00..79cb5c74c76c 100644
@@ -941,6 +941,21 @@ int sock_set_timestamping(struct sock *sk, int optname,
      return 0;
  }
 
Quoted 8 lines

net/core/sock.c int sock_set_timestamping(struct sock *sk, int optname, · line 949

Quoted 6 lines
net/core/sock.c +6 -0
+#if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_SYSCALL)
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+{
+     struct bpf_sock_ops_kern sock_ops;
+
+     sock_owned_by_me(sk);

I don't think this can be assumed in the time stamping callback.

I'll remove this.

Quoted 5 lines

To remove this assumption for sockops, I believe it needs to stop the bpf prog from calling a few bpf helpers. In particular, the bpf_sock_ops_cb_flags_set and bpf_sock_ops_setsockopt. This should be easy by asking the helpers to check the "u8 op" in "struct bpf_sock_ops_kern *".

Sorry, I don't follow. Could you rephrase your thoughts? Thanks.

Quoted 7 lines

I just noticed a trickier one, sockops bpf prog can write to sk->sk_txhash. The same should go for reading from sk. Also, sockops prog assumes a fullsock sk is a tcp_sock which also won't work for the udp case. A quick thought is to do something similar to is_fullsock. May be repurpose the is_fullsock somehow or a new u8 is needed. Take a look at SOCK_OPS_{GET,SET}_FIELD. It avoids writing/reading the sk when is_fullsock is false.

Do you mean that if we introduce a new field, then bpf prog can read/write the socket?

Reading the socket could be very helpful in the long run.

Quoted 11 lines

This is a signal that the existing sockops interface has already seen better days. I hope not too many fixes like these are needed to get tcp/udp timestamping to work.

net/core/sock.c int sock_set_timestamping(struct sock *sk, int optname, · line 953

Quoted 4 lines
net/core/sock.c +4 -0
+
+     memset(&sock_ops, 0, offsetof(struct bpf_sock_ops_kern, temp));
+     sock_ops.op = op;
+     sock_ops.is_fullsock = 1;

I don't think we can assume it is always is_fullsock either.

Right, but for now, TCP seems to need this. I can remove this also.

Quoted 6 lines

net/core/sock.c int sock_set_timestamping(struct sock *sk, int optname, · line 955

Quoted 3 lines
net/core/sock.c +2 -0
+     sock_ops.sk = sk;
+     __cgroup_bpf_run_filter_sock_ops(sk, &sock_ops, CGROUP_SOCK_OPS);

Same here. sk may not be fullsock. BPF_CGROUP_RUN_PROG_SOCK_OPS(&sock_ops) is needed.

If we use this helper, we will change when the udp bpf extension needs to be supported.

Quoted 2 lines

[ I will continue the rest of the set later. ]

Thanks a lot :)

Quoted 8 lines
Quoted 7 lines
net/core/sock.c +3 -0
+}
+#endif
+
  void sock_set_keepalive(struct sock *sk)
  {
      lock_sock(sk);
#9 lore raw

Re: [PATCH net-next v4 02/11] net-timestamp: prepare for bpf prog use

Quoted 52 lines · Jason Xing
Quoted 39 lines · Martin KaFai Lau
Quoted 37 lines · Jason Xing

From: Jason Xing <[email protected]>

Later, I would introduce three points to report some information to user space based on this.

---
   include/net/sock.h |  7 +++++++
   net/core/sock.c    | 15 +++++++++++++++
   2 files changed, 22 insertions(+)
include/net/sock.h +7 -0
index 0dd464ba9e46..f88a00108a2f 100644
@@ -2920,6 +2920,13 @@ int sock_set_timestamping(struct sock *sk, int optname,
                         struct so_timestamping timestamping);
 
   void sock_enable_timestamps(struct sock *sk);
+#if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_SYSCALL)
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op);
+#else
+static inline void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+{
+}
+#endif
   void sock_no_linger(struct sock *sk);
   void sock_set_keepalive(struct sock *sk);
   void sock_set_priority(struct sock *sk, u32 priority);
net/core/sock.c +0 -0
index 74729d20cd00..79cb5c74c76c 100644
@@ -941,6 +941,21 @@ int sock_set_timestamping(struct sock *sk, int optname,
       return 0;
   }
 
Quoted 8 lines

net/core/sock.c int sock_set_timestamping(struct sock *sk, int optname, · line 949

Quoted 6 lines
net/core/sock.c +6 -0
+#if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_SYSCALL)
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+{
+     struct bpf_sock_ops_kern sock_ops;
+
+     sock_owned_by_me(sk);

I don't think this can be assumed in the time stamping callback.

I'll remove this.

Quoted 1 line
Quoted 6 lines
Quoted 4 lines

To remove this assumption for sockops, I believe it needs to stop the bpf prog from calling a few bpf helpers. In particular, the bpf_sock_ops_cb_flags_set and bpf_sock_ops_setsockopt. This should be easy by asking the helpers to check the "u8 op" in "struct bpf_sock_ops_kern *".

Sorry, I don't follow. Could you rephrase your thoughts? Thanks.

Take a look at bpf_sock_ops_setsockopt in filter.c. To change a sk, it needs to hold the sk_lock. If you drill down bpf_sock_ops_setsockopt, sock_owned_by_me(sk) is checked somewhere.

The sk_lock held assumption is true so far for the existing sockops callbacks.
The new timestamping sockops callback does not necessary have the sk_lock held, so it will break the bpf_sock_ops_setsockopt() assumption on the sk_lock.

Quoted 11 lines
Quoted 8 lines

I just noticed a trickier one, sockops bpf prog can write to sk->sk_txhash. The same should go for reading from sk. Also, sockops prog assumes a fullsock sk is a tcp_sock which also won't work for the udp case. A quick thought is to do something similar to is_fullsock. May be repurpose the is_fullsock somehow or a new u8 is needed. Take a look at SOCK_OPS_{GET,SET}_FIELD. It avoids writing/reading the sk when is_fullsock is false.

Do you mean that if we introduce a new field, then bpf prog can read/write the socket?

The same goes for writing the sk, e.g. writing the sk->sk_txhash. It needs the sk_lock held. Reading may be ok-ish. The bpf prog can read it anyway by bpf_probe_read...etc.

When adding udp timestamp callback later, it needs to stop reading the tcp_sock through skops from the udp callback for sure. Do take a look at SOCK_OPS_GET_TCP_SOCK_FIELD. I think we need to ensure the udp timestamp callback won't break here before moving forward.

Quoted 8 lines

Reading the socket could be very helpful in the long run.

Quoted 5 lines

This is a signal that the existing sockops interface has already seen better days. I hope not too many fixes like these are needed to get tcp/udp timestamping to work.

Quoted 8 lines
Quoted 6 lines

net/core/sock.c int sock_set_timestamping(struct sock *sk, int optname, · line 953

Quoted 4 lines
net/core/sock.c +4 -0
+
+     memset(&sock_ops, 0, offsetof(struct bpf_sock_ops_kern, temp));
+     sock_ops.op = op;
+     sock_ops.is_fullsock = 1;

I don't think we can assume it is always is_fullsock either.

Right, but for now, TCP seems to need this. I can remove this also.

I take this back. After reading the existing __skb_tstamp_tx, I think sk is always fullsock here.

Quoted 24 lines
Quoted 7 lines

net/core/sock.c int sock_set_timestamping(struct sock *sk, int optname, · line 955

Quoted 4 lines
net/core/sock.c +2 -0
+     sock_ops.sk = sk;
+     __cgroup_bpf_run_filter_sock_ops(sk, &sock_ops, CGROUP_SOCK_OPS);

Same here. sk may not be fullsock. BPF_CGROUP_RUN_PROG_SOCK_OPS(&sock_ops) is needed.

If we use this helper, we will change when the udp bpf extension needs to be supported.

Quoted 2 lines

[ I will continue the rest of the set later. ]

Thanks a lot :)

Quoted 8 lines
Quoted 7 lines
net/core/sock.c +3 -0
+}
+#endif
+
   void sock_set_keepalive(struct sock *sk)
   {
       lock_sock(sk);
author
#10 lore raw

Re: [PATCH net-next v4 02/11] net-timestamp: prepare for bpf prog use

Quoted 59 lines · Martin KaFai Lau
Quoted 57 lines · Jason Xing
Quoted 39 lines · Martin KaFai Lau
Quoted 37 lines · Jason Xing

From: Jason Xing <[email protected]>

Later, I would introduce three points to report some information to user space based on this.

---
   include/net/sock.h |  7 +++++++
   net/core/sock.c    | 15 +++++++++++++++
   2 files changed, 22 insertions(+)
include/net/sock.h +7 -0
index 0dd464ba9e46..f88a00108a2f 100644
@@ -2920,6 +2920,13 @@ int sock_set_timestamping(struct sock *sk, int optname,
                         struct so_timestamping timestamping);
 
   void sock_enable_timestamps(struct sock *sk);
+#if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_SYSCALL)
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op);
+#else
+static inline void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+{
+}
+#endif
   void sock_no_linger(struct sock *sk);
   void sock_set_keepalive(struct sock *sk);
   void sock_set_priority(struct sock *sk, u32 priority);
net/core/sock.c +0 -0
index 74729d20cd00..79cb5c74c76c 100644
@@ -941,6 +941,21 @@ int sock_set_timestamping(struct sock *sk, int optname,
       return 0;
   }
 
Quoted 8 lines

net/core/sock.c int sock_set_timestamping(struct sock *sk, int optname, · line 949

Quoted 6 lines
net/core/sock.c +6 -0
+#if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_SYSCALL)
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+{
+     struct bpf_sock_ops_kern sock_ops;
+
+     sock_owned_by_me(sk);

I don't think this can be assumed in the time stamping callback.

I'll remove this.

Quoted 5 lines

To remove this assumption for sockops, I believe it needs to stop the bpf prog from calling a few bpf helpers. In particular, the bpf_sock_ops_cb_flags_set and bpf_sock_ops_setsockopt. This should be easy by asking the helpers to check the "u8 op" in "struct bpf_sock_ops_kern *".

Quoted 5 lines
Quoted 1 line

Sorry, I don't follow. Could you rephrase your thoughts? Thanks.

Take a look at bpf_sock_ops_setsockopt in filter.c. To change a sk, it needs to hold the sk_lock. If you drill down bpf_sock_ops_setsockopt, sock_owned_by_me(sk) is checked somewhere.

Thanks, now I totally follow.

Quoted 3 lines

The sk_lock held assumption is true so far for the existing sockops callbacks. The new timestamping sockops callback does not necessary have the sk_lock held,

Well, for TCP only, there are three new callbacks that I think own the sk_lock already, say, the tcp_sendmsg() will call the lock_sock(). For other types, like you said, maybe not.

Quoted 1 line

so it will break the bpf_sock_ops_setsockopt() assumption on the sk_lock.

Agreed, at least for the writer accessing the sk is not allowed actually.

Quoted 13 lines
Quoted 10 lines
Quoted 9 lines

I just noticed a trickier one, sockops bpf prog can write to sk->sk_txhash. The same should go for reading from sk. Also, sockops prog assumes a fullsock sk is a tcp_sock which also won't work for the udp case. A quick thought is to do something similar to is_fullsock. May be repurpose the is_fullsock somehow or a new u8 is needed. Take a look at SOCK_OPS_{GET,SET}_FIELD. It avoids writing/reading the sk when is_fullsock is false.

Quoted 2 lines

Do you mean that if we introduce a new field, then bpf prog can read/write the socket?

Quoted 8 lines

The same goes for writing the sk, e.g. writing the sk->sk_txhash. It needs the sk_lock held. Reading may be ok-ish. The bpf prog can read it anyway by bpf_probe_read...etc.

When adding udp timestamp callback later, it needs to stop reading the tcp_sock through skops from the udp callback for sure. Do take a look at SOCK_OPS_GET_TCP_SOCK_FIELD. I think we need to ensure the udp timestamp callback won't break here before moving forward.

Agreed. Removing the "sock_ops.sk = sk;" is simple, but I still want the bpf prog to be able to read some fields from the socket under those new callbacks.

Let me figure out a feasible solution this weekend if everything goes well.

Quoted 14 lines
Quoted 14 lines

Reading the socket could be very helpful in the long run.

Quoted 10 lines

This is a signal that the existing sockops interface has already seen better days. I hope not too many fixes like these are needed to get tcp/udp timestamping to work.

Quoted 4 lines
net/core/sock.c +4 -0
+
+     memset(&sock_ops, 0, offsetof(struct bpf_sock_ops_kern, temp));
+     sock_ops.op = op;
+     sock_ops.is_fullsock = 1;
Quoted 6 lines
Quoted 3 lines
Quoted 1 line

I don't think we can assume it is always is_fullsock either.

Right, but for now, TCP seems to need this. I can remove this also.

I take this back. After reading the existing __skb_tstamp_tx, I think sk is always fullsock here.

Got it.

Quoted 26 lines
Quoted 25 lines
Quoted 8 lines

net/core/sock.c int sock_set_timestamping(struct sock *sk, int optname, · line 955

Quoted 5 lines
net/core/sock.c +2 -0
+     sock_ops.sk = sk;
+     __cgroup_bpf_run_filter_sock_ops(sk, &sock_ops, CGROUP_SOCK_OPS);

Same here. sk may not be fullsock. BPF_CGROUP_RUN_PROG_SOCK_OPS(&sock_ops) is needed.

If we use this helper, we will change when the udp bpf extension needs to be supported.

Quoted 2 lines

[ I will continue the rest of the set later. ]

Thanks a lot :)

Quoted 8 lines
Quoted 7 lines
net/core/sock.c +3 -0
+}
+#endif
+
   void sock_set_keepalive(struct sock *sk)
   {
       lock_sock(sk);
#11 lore raw

Re: [PATCH net-next v4 02/11] net-timestamp: prepare for bpf prog use

Quoted 6 lines · Jason Xing
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

I just noticed a trickier one, sockops bpf prog can write to sk->sk_txhash. The same should go for reading from sk. Also, sockops prog assumes a fullsock sk is a tcp_sock which also won't work for the udp case. A quick thought is to do something similar to is_fullsock. May be repurpose the is_fullsock somehow or a new u8 is needed. Take a look at SOCK_OPS_{GET,SET}_FIELD. It avoids writing/reading the sk when is_fullsock is false.

May be this message buried in the earlier reply or some piece was not clear, so worth to highlight here.

Take a look at how is_fullsock is used in SOCK_OPS_{GET,SET}_FIELD. I think a similar idea can be borrowed here.

Quoted 8 lines
Quoted 8 lines
Quoted 3 lines

Do you mean that if we introduce a new field, then bpf prog can read/write the socket?

The same goes for writing the sk, e.g. writing the sk->sk_txhash. It needs the sk_lock held. Reading may be ok-ish. The bpf prog can read it anyway by bpf_probe_read...etc.

Quoted 8 lines
Quoted 4 lines

When adding udp timestamp callback later, it needs to stop reading the tcp_sock through skops from the udp callback for sure. Do take a look at SOCK_OPS_GET_TCP_SOCK_FIELD. I think we need to ensure the udp timestamp callback won't break here before moving forward.

Agreed. Removing the "sock_ops.sk = sk;" is simple, but I still want the bpf prog to be able to read some fields from the socket under those new callbacks.

No need to remove "sock_ops.sk = sk;". Try to borrow the is_fullsock idea.

Overall, the new timestamp callback breaks assumptions like, sk_lock is held and is_fullsock must be a tcp_sock. This needs to be audited. In particular, please check sock_ops_func_proto() for all accessible bpf helpers. Also check the sock_ops_is_valid_access() and sock_ops_convert_ctx_access() for directly accessible fields without the helpers. In particular, the BPF_WRITE (able) fields and the tcp_sock fields.

author
#12 lore raw

Re: [PATCH net-next v4 02/11] net-timestamp: prepare for bpf prog use

Quoted 32 lines · Martin KaFai Lau
Quoted 6 lines · Jason Xing
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines

I just noticed a trickier one, sockops bpf prog can write to sk->sk_txhash. The same should go for reading from sk. Also, sockops prog assumes a fullsock sk is a tcp_sock which also won't work for the udp case. A quick thought is to do something similar to is_fullsock. May be repurpose the is_fullsock somehow or a new u8 is needed. Take a look at SOCK_OPS_{GET,SET}_FIELD. It avoids writing/reading the sk when is_fullsock is false.

May be this message buried in the earlier reply or some piece was not clear, so worth to highlight here.

Take a look at how is_fullsock is used in SOCK_OPS_{GET,SET}_FIELD. I think a similar idea can be borrowed here.

Quoted 8 lines
Quoted 8 lines
Quoted 3 lines

Do you mean that if we introduce a new field, then bpf prog can read/write the socket?

The same goes for writing the sk, e.g. writing the sk->sk_txhash. It needs the sk_lock held. Reading may be ok-ish. The bpf prog can read it anyway by bpf_probe_read...etc.

Quoted 8 lines
Quoted 4 lines

When adding udp timestamp callback later, it needs to stop reading the tcp_sock through skops from the udp callback for sure. Do take a look at SOCK_OPS_GET_TCP_SOCK_FIELD. I think we need to ensure the udp timestamp callback won't break here before moving forward.

Agreed. Removing the "sock_ops.sk = sk;" is simple, but I still want the bpf prog to be able to read some fields from the socket under those new callbacks.

Quoted 8 lines

No need to remove "sock_ops.sk = sk;". Try to borrow the is_fullsock idea.

Overall, the new timestamp callback breaks assumptions like, sk_lock is held and is_fullsock must be a tcp_sock. This needs to be audited. In particular, please check sock_ops_func_proto() for all accessible bpf helpers. Also check the sock_ops_is_valid_access() and sock_ops_convert_ctx_access() for directly accessible fields without the helpers. In particular, the BPF_WRITE (able) fields and the tcp_sock fields.

Thanks for the valuable information. I will dig into them.

author
#13 lore raw

PATCH v4 3/11 net-timestamp: reorganize in skb_tstamp_tx_output()

In reply to Jason Xing

From: Jason Xing <[email protected]>

It's a prep for bpf print function later. This patch only puts the original generating logic into one function, so that we integrate bpf print easily. No functional changes here.

---
 include/linux/skbuff.h |  4 ++--
 net/core/dev.c         |  3 +--
 net/core/skbuff.c      | 41 +++++++++++++++++++++++++++++++++++------
 3 files changed, 38 insertions(+), 10 deletions(-)
include/linux/skbuff.h +2 -2
index 58009fa66102..53c6913560e4 100644
@@ -39,6 +39,7 @@
 #include <net/net_debug.h>
 #include <net/dropreason-core.h>
 #include <net/netmem.h>
+#include <uapi/linux/errqueue.h>
 
 /**
  * DOC: skb checksums
@@ -4535,8 +4536,7 @@ void skb_tstamp_tx(struct sk_buff *orig_skb,
 static inline void skb_tx_timestamp(struct sk_buff *skb)
 {
 	skb_clone_tx_timestamp(skb);
-	if (skb_shinfo(skb)->tx_flags & SKBTX_SW_TSTAMP)
-		skb_tstamp_tx(skb, NULL);
+	__skb_tstamp_tx(skb, NULL, NULL, skb->sk, SCM_TSTAMP_SND);
 }
 
 /**
net/core/dev.c +1 -2
index 45a8c3dd4a64..5d584950564b 100644
@@ -4350,8 +4350,7 @@ int __dev_queue_xmit(struct sk_buff *skb, struct net_device *sb_dev)
 	skb_reset_mac_header(skb);
 	skb_assert_len(skb);
 
-	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_SCHED_TSTAMP))
-		__skb_tstamp_tx(skb, NULL, NULL, skb->sk, SCM_TSTAMP_SCHED);
+	__skb_tstamp_tx(skb, NULL, NULL, skb->sk, SCM_TSTAMP_SCHED);
 
 	/* Disable soft irqs for various locks below. Also
 	 * stops preemption for RCU.
net/core/skbuff.c +35 -6

58 lines not on this page · raw message

Signature · 1 line
2.37.3
#14 lore raw

Re: [PATCH net-next v4 03/11] net-timestamp: reorganize in skb_tstamp_tx_output()

Quoted 40 lines · Jason Xing

From: Jason Xing <[email protected]>

It's a prep for bpf print function later. This patch only puts the original generating logic into one function, so that we integrate bpf print easily. No functional changes here.

---
 include/linux/skbuff.h |  4 ++--
 net/core/dev.c         |  3 +--
 net/core/skbuff.c      | 41 +++++++++++++++++++++++++++++++++++------
 3 files changed, 38 insertions(+), 10 deletions(-)
include/linux/skbuff.h +2 -2
index 58009fa66102..53c6913560e4 100644
@@ -39,6 +39,7 @@
 #include <net/net_debug.h>
 #include <net/dropreason-core.h>
 #include <net/netmem.h>
+#include <uapi/linux/errqueue.h>
 
 /**
  * DOC: skb checksums
@@ -4535,8 +4536,7 @@ void skb_tstamp_tx(struct sk_buff *orig_skb,
 static inline void skb_tx_timestamp(struct sk_buff *skb)
 {
 	skb_clone_tx_timestamp(skb);
-	if (skb_shinfo(skb)->tx_flags & SKBTX_SW_TSTAMP)
-		skb_tstamp_tx(skb, NULL);
+	__skb_tstamp_tx(skb, NULL, NULL, skb->sk, SCM_TSTAMP_SND);
 }
 
 /**
net/core/dev.c +0 -0
index 45a8c3dd4a64..5d584950564b 100644

net/core/dev.c int __dev_queue_xmit(struct sk_buff *skb, struct net_device *sb_dev) · line 4353

Quoted 6 lines
net/core/dev.c +1 -2
@@ -4350,8 +4350,7 @@ int __dev_queue_xmit(struct sk_buff *skb, struct net_device *sb_dev)
 	skb_reset_mac_header(skb);
 	skb_assert_len(skb);
 
-	if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_SCHED_TSTAMP))
-		__skb_tstamp_tx(skb, NULL, NULL, skb->sk, SCM_TSTAMP_SCHED);
+	__skb_tstamp_tx(skb, NULL, NULL, skb->sk, SCM_TSTAMP_SCHED);

This adds a function call in the hot path, as __skb_tstamp_tx is defined in a .c file.

Currently this is only well predicted branch on a likely cache hot variable.

Quoted 27 lines
net/core/dev.c +0 -0
 	/* Disable soft irqs for various locks below. Also
 	 * stops preemption for RCU.
net/core/skbuff.c +5 -4
index 6841e61a6bd0..74b840ffaf94 100644
@@ -5539,10 +5539,10 @@ void skb_complete_tx_timestamp(struct sk_buff *skb,
 }
 EXPORT_SYMBOL_GPL(skb_complete_tx_timestamp);
 
-void __skb_tstamp_tx(struct sk_buff *orig_skb,
-		     const struct sk_buff *ack_skb,
-		     struct skb_shared_hwtstamps *hwtstamps,
-		     struct sock *sk, int tstype)
+static void skb_tstamp_tx_output(struct sk_buff *orig_skb,
+				 const struct sk_buff *ack_skb,
+				 struct skb_shared_hwtstamps *hwtstamps,
+				 struct sock *sk, int tstype)
 {
 	struct sk_buff *skb;
 	bool tsonly, opt_stats = false;
@@ -5594,13 +5594,42 @@ void __skb_tstamp_tx(struct sk_buff *orig_skb,
 
 	__skb_complete_tx_timestamp(skb, sk, tstype, opt_stats);
 }
+

net/core/skbuff.c void __skb_tstamp_tx(struct sk_buff *orig_skb, · line 5607

Quoted 10 lines
net/core/skbuff.c +10 -0
+static bool skb_tstamp_is_set(const struct sk_buff *skb, int tstype)
+{
+	switch (tstype) {
+	case SCM_TSTAMP_SCHED:
+		if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_SCHED_TSTAMP))
+			return true;
+		return false;
+	case SCM_TSTAMP_SND:
+		if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_SW_TSTAMP))
+			return true;

Also true for SKBTX_HW_TSTAMP

Quoted 33 lines
net/core/skbuff.c +20 -2
+		return false;
+	case SCM_TSTAMP_ACK:
+		if (TCP_SKB_CB(skb)->txstamp_ack)
+			return true;
+		return false;
+	}
+
+	return false;
+}
+
+void __skb_tstamp_tx(struct sk_buff *orig_skb,
+		     const struct sk_buff *ack_skb,
+		     struct skb_shared_hwtstamps *hwtstamps,
+		     struct sock *sk, int tstype)
+{
+	if (unlikely(skb_tstamp_is_set(orig_skb, tstype)))
+		skb_tstamp_tx_output(orig_skb, ack_skb, hwtstamps, sk, tstype);
+}
 EXPORT_SYMBOL_GPL(__skb_tstamp_tx);
 
 void skb_tstamp_tx(struct sk_buff *orig_skb,
 		   struct skb_shared_hwtstamps *hwtstamps)
 {
-	return __skb_tstamp_tx(orig_skb, NULL, hwtstamps, orig_skb->sk,
-			       SCM_TSTAMP_SND);
+	return skb_tstamp_tx_output(orig_skb, NULL, hwtstamps, orig_skb->sk,
+				    SCM_TSTAMP_SND);
 }
 EXPORT_SYMBOL_GPL(skb_tstamp_tx);
 
Signature · 1 line
2.37.3
author
#15 lore raw

Re: [PATCH net-next v4 03/11] net-timestamp: reorganize in skb_tstamp_tx_output()

Quoted 52 lines · Willem de Bruijn
Quoted 40 lines · Jason Xing

From: Jason Xing <[email protected]>

It's a prep for bpf print function later. This patch only puts the original generating logic into one function, so that we integrate bpf print easily. No functional changes here.

---
 include/linux/skbuff.h |  4 ++--
 net/core/dev.c         |  3 +--
 net/core/skbuff.c      | 41 +++++++++++++++++++++++++++++++++++------
 3 files changed, 38 insertions(+), 10 deletions(-)
include/linux/skbuff.h +2 -2
index 58009fa66102..53c6913560e4 100644
@@ -39,6 +39,7 @@
 #include <net/net_debug.h>
 #include <net/dropreason-core.h>
 #include <net/netmem.h>
+#include <uapi/linux/errqueue.h>
 
 /**
  * DOC: skb checksums
@@ -4535,8 +4536,7 @@ void skb_tstamp_tx(struct sk_buff *orig_skb,
 static inline void skb_tx_timestamp(struct sk_buff *skb)
 {
      skb_clone_tx_timestamp(skb);
-     if (skb_shinfo(skb)->tx_flags & SKBTX_SW_TSTAMP)
-             skb_tstamp_tx(skb, NULL);
+     __skb_tstamp_tx(skb, NULL, NULL, skb->sk, SCM_TSTAMP_SND);
 }
 
 /**
net/core/dev.c +0 -0
index 45a8c3dd4a64..5d584950564b 100644

net/core/dev.c int __dev_queue_xmit(struct sk_buff *skb, struct net_device *sb_dev) · line 4353

Quoted 6 lines
net/core/dev.c +1 -2
@@ -4350,8 +4350,7 @@ int __dev_queue_xmit(struct sk_buff *skb, struct net_device *sb_dev)
      skb_reset_mac_header(skb);
      skb_assert_len(skb);
 
-     if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_SCHED_TSTAMP))
-             __skb_tstamp_tx(skb, NULL, NULL, skb->sk, SCM_TSTAMP_SCHED);
+     __skb_tstamp_tx(skb, NULL, NULL, skb->sk, SCM_TSTAMP_SCHED);

This adds a function call in the hot path, as __skb_tstamp_tx is defined in a .c file.

Quoted 2 lines

Currently this is only well predicted branch on a likely cache hot variable.

Oh, right, thanks for reminding me. I will figure out a better solution :)

Quoted 75 lines
Quoted 27 lines
net/core/dev.c +0 -0
      /* Disable soft irqs for various locks below. Also
       * stops preemption for RCU.
net/core/skbuff.c +5 -4
index 6841e61a6bd0..74b840ffaf94 100644
@@ -5539,10 +5539,10 @@ void skb_complete_tx_timestamp(struct sk_buff *skb,
 }
 EXPORT_SYMBOL_GPL(skb_complete_tx_timestamp);
 
-void __skb_tstamp_tx(struct sk_buff *orig_skb,
-                  const struct sk_buff *ack_skb,
-                  struct skb_shared_hwtstamps *hwtstamps,
-                  struct sock *sk, int tstype)
+static void skb_tstamp_tx_output(struct sk_buff *orig_skb,
+                              const struct sk_buff *ack_skb,
+                              struct skb_shared_hwtstamps *hwtstamps,
+                              struct sock *sk, int tstype)
 {
      struct sk_buff *skb;
      bool tsonly, opt_stats = false;
@@ -5594,13 +5594,42 @@ void __skb_tstamp_tx(struct sk_buff *orig_skb,
 
      __skb_complete_tx_timestamp(skb, sk, tstype, opt_stats);
 }
+

net/core/skbuff.c void __skb_tstamp_tx(struct sk_buff *orig_skb, · line 5607

Quoted 10 lines
net/core/skbuff.c +10 -0
+static bool skb_tstamp_is_set(const struct sk_buff *skb, int tstype)
+{
+     switch (tstype) {
+     case SCM_TSTAMP_SCHED:
+             if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_SCHED_TSTAMP))
+                     return true;
+             return false;
+     case SCM_TSTAMP_SND:
+             if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_SW_TSTAMP))
+                     return true;

Also true for SKBTX_HW_TSTAMP

Quoted 33 lines
net/core/skbuff.c +20 -3
+             return false;
+     case SCM_TSTAMP_ACK:
+             if (TCP_SKB_CB(skb)->txstamp_ack)
+                     return true;
+             return false;
+     }
+
+     return false;
+}
+
+void __skb_tstamp_tx(struct sk_buff *orig_skb,
+                  const struct sk_buff *ack_skb,
+                  struct skb_shared_hwtstamps *hwtstamps,
+                  struct sock *sk, int tstype)
+{
+     if (unlikely(skb_tstamp_is_set(orig_skb, tstype)))
+             skb_tstamp_tx_output(orig_skb, ack_skb, hwtstamps, sk, tstype);
+}
 EXPORT_SYMBOL_GPL(__skb_tstamp_tx);
 
 void skb_tstamp_tx(struct sk_buff *orig_skb,
                 struct skb_shared_hwtstamps *hwtstamps)
 {
-     return __skb_tstamp_tx(orig_skb, NULL, hwtstamps, orig_skb->sk,
-                            SCM_TSTAMP_SND);
+     return skb_tstamp_tx_output(orig_skb, NULL, hwtstamps, orig_skb->sk,
+                                 SCM_TSTAMP_SND);
 }
 EXPORT_SYMBOL_GPL(skb_tstamp_tx);
 
--

2.37.3

author
#16 lore raw

PATCH v4 4/11 net-timestamp: support SCM_TSTAMP_SCHED for bpf extension

In reply to Jason Xing

From: Jason Xing <[email protected]>

Introducing SKBTX_BPF is used as an indicator telling us whether the skb should be traced by the bpf prog.

---
 include/linux/skbuff.h         |  6 +++++-
 include/uapi/linux/bpf.h       |  5 +++++
 net/core/skbuff.c              | 29 ++++++++++++++++++++++++++---
 tools/include/uapi/linux/bpf.h |  5 +++++
 4 files changed, 41 insertions(+), 4 deletions(-)
include/linux/skbuff.h +5 -1
index 53c6913560e4..af22c8326ca5 100644
@@ -490,10 +490,14 @@ enum {
 
 	/* generate software time stamp when entering packet scheduling */
 	SKBTX_SCHED_TSTAMP = 1 << 6,
+
+	/* used for bpf extension when a bpf program is loaded */
+	SKBTX_BPF = 1 << 7,
 };
 
 #define SKBTX_ANY_SW_TSTAMP	(SKBTX_SW_TSTAMP    | \
-				 SKBTX_SCHED_TSTAMP)
+				 SKBTX_SCHED_TSTAMP	| \
+				 SKBTX_BPF)
 #define SKBTX_ANY_TSTAMP	(SKBTX_HW_TSTAMP | \
 				 SKBTX_HW_TSTAMP_USE_CYCLES | \
 				 SKBTX_ANY_SW_TSTAMP)
include/uapi/linux/bpf.h +5 -0
index e629e09b0b31..72f93c6e45c1 100644
@@ -7022,6 +7022,11 @@ enum {
 					 * by the kernel or the
 					 * earlier bpf-progs.
 					 */
+	BPF_SOCK_OPS_TS_SCHED_OPT_CB,	/* Called when skb is passing through
+					 * dev layer when SO_TIMESTAMPING
+					 * feature is on. It indicates the
+					 * recorded timestamp.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
net/core/skbuff.c +26 -3
index 74b840ffaf94..fd4f06b88a2e 100644
@@ -5539,6 +5539,24 @@ void skb_complete_tx_timestamp(struct sk_buff *skb,
 }
 EXPORT_SYMBOL_GPL(skb_complete_tx_timestamp);
 
+static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype)
+{
+	int op;
+
+	if (!sk)
+		return;
+
+	switch (tstype) {
+	case SCM_TSTAMP_SCHED:
+		op = BPF_SOCK_OPS_TS_SCHED_OPT_CB;
+		break;
+	default:
+		return;
+	}
+
+	bpf_skops_tx_timestamping(sk, skb, op);
+}
+
 static void skb_tstamp_tx_output(struct sk_buff *orig_skb,
 				 const struct sk_buff *ack_skb,
 				 struct skb_shared_hwtstamps *hwtstamps,
@@ -5595,11 +5613,14 @@ static void skb_tstamp_tx_output(struct sk_buff *orig_skb,
 	__skb_complete_tx_timestamp(skb, sk, tstype, opt_stats);
 }
 
-static bool skb_tstamp_is_set(const struct sk_buff *skb, int tstype)
+static bool skb_tstamp_is_set(const struct sk_buff *skb, int tstype, bool bpf_mode)
 {
+	int flag;
+
 	switch (tstype) {
 	case SCM_TSTAMP_SCHED:
-		if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_SCHED_TSTAMP))
+		flag = bpf_mode ? SKBTX_BPF : SKBTX_SCHED_TSTAMP;
+		if (unlikely(skb_shinfo(skb)->tx_flags & flag))
 			return true;
 		return false;
 	case SCM_TSTAMP_SND:
@@ -5620,8 +5641,10 @@ void __skb_tstamp_tx(struct sk_buff *orig_skb,
 		     struct skb_shared_hwtstamps *hwtstamps,
 		     struct sock *sk, int tstype)
 {
-	if (unlikely(skb_tstamp_is_set(orig_skb, tstype)))
+	if (unlikely(skb_tstamp_is_set(orig_skb, tstype, false)))
 		skb_tstamp_tx_output(orig_skb, ack_skb, hwtstamps, sk, tstype);
+	if (unlikely(skb_tstamp_is_set(orig_skb, tstype, true)))
+		__skb_tstamp_tx_bpf(sk, orig_skb, tstype);
 }
 EXPORT_SYMBOL_GPL(__skb_tstamp_tx);
 
tools/include/uapi/linux/bpf.h +5 -0
index 6b0a5b787b12..891217ab6d2d 100644
@@ -7015,6 +7015,11 @@ enum {
 					 * by the kernel or the
 					 * earlier bpf-progs.
 					 */
+	BPF_SOCK_OPS_TS_SCHED_OPT_CB,	/* Called when skb is passing through
+					 * dev layer when SO_TIMESTAMPING
+					 * feature is on. It indicates the
+					 * recorded timestamp.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
Signature · 1 line
2.37.3
author
#17 lore raw

PATCH v4 5/11 net-timestamp: support SCM_TSTAMP_SND for bpf extension

In reply to Jason Xing

From: Jason Xing <[email protected]>

Support SCM_TSTAMP_SND case. Then we will get the timestamp when the driver is about to send the skb.

---
 include/uapi/linux/bpf.h       |  5 +++++
 net/core/skbuff.c              | 13 ++++++++++---
 tools/include/uapi/linux/bpf.h |  5 +++++
 3 files changed, 20 insertions(+), 3 deletions(-)
include/uapi/linux/bpf.h +5 -0
index 72f93c6e45c1..a6d761f07f67 100644
@@ -7027,6 +7027,11 @@ enum {
 					 * feature is on. It indicates the
 					 * recorded timestamp.
 					 */
+	BPF_SOCK_OPS_TS_SW_OPT_CB,	/* Called when skb is about to send
+					 * to the nic when SO_TIMESTAMPING
+					 * feature is on. It indicates the
+					 * recorded timestamp.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
net/core/skbuff.c +10 -3
index fd4f06b88a2e..73b15d6277f7 100644
@@ -5550,6 +5550,9 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype
 	case SCM_TSTAMP_SCHED:
 		op = BPF_SOCK_OPS_TS_SCHED_OPT_CB;
 		break;
+	case SCM_TSTAMP_SND:
+		op = BPF_SOCK_OPS_TS_SW_OPT_CB;
+		break;
 	default:
 		return;
 	}
@@ -5624,7 +5627,8 @@ static bool skb_tstamp_is_set(const struct sk_buff *skb, int tstype, bool bpf_mo
 			return true;
 		return false;
 	case SCM_TSTAMP_SND:
-		if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_SW_TSTAMP))
+		flag = bpf_mode ? SKBTX_BPF : SKBTX_SW_TSTAMP;
+		if (unlikely(skb_shinfo(skb)->tx_flags & flag))
 			return true;
 		return false;
 	case SCM_TSTAMP_ACK:
@@ -5651,8 +5655,11 @@ EXPORT_SYMBOL_GPL(__skb_tstamp_tx);
 void skb_tstamp_tx(struct sk_buff *orig_skb,
 		   struct skb_shared_hwtstamps *hwtstamps)
 {
-	return skb_tstamp_tx_output(orig_skb, NULL, hwtstamps, orig_skb->sk,
-				    SCM_TSTAMP_SND);
+	int tstype = SCM_TSTAMP_SND;
+
+	skb_tstamp_tx_output(orig_skb, NULL, hwtstamps, orig_skb->sk, tstype);
+	if (unlikely(skb_tstamp_is_set(orig_skb, tstype, true)))
+		__skb_tstamp_tx_bpf(orig_skb->sk, orig_skb, tstype);
 }
 EXPORT_SYMBOL_GPL(skb_tstamp_tx);
 
tools/include/uapi/linux/bpf.h +5 -0
index 891217ab6d2d..73fc0a95c9ca 100644
@@ -7020,6 +7020,11 @@ enum {
 					 * feature is on. It indicates the
 					 * recorded timestamp.
 					 */
+	BPF_SOCK_OPS_TS_SW_OPT_CB,	/* Called when skb is about to send
+					 * to the nic when SO_TIMESTAMPING
+					 * feature is on. It indicates the
+					 * recorded timestamp.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
Signature · 1 line
2.37.3
author
#18 lore raw

PATCH v4 6/11 net-timestamp: support SCM_TSTAMP_ACK for bpf extension

In reply to Jason Xing

From: Jason Xing <[email protected]>

Handle the ACK timestamp case. Actually testing SKBTX_BPF flag can work, but we need to Introduce a new txstamp_ack_bpf to avoid cache line misses in tcp_ack_tstamp().

---
 include/net/tcp.h              | 3 ++-
 include/uapi/linux/bpf.h       | 5 +++++
 net/core/skbuff.c              | 9 ++++++---
 net/ipv4/tcp_input.c           | 3 ++-
 net/ipv4/tcp_output.c          | 5 +++++
 tools/include/uapi/linux/bpf.h | 5 +++++
 6 files changed, 25 insertions(+), 5 deletions(-)
include/net/tcp.h +2 -1
index e9b37b76e894..8e5103d3c6b9 100644
@@ -959,9 +959,10 @@ struct tcp_skb_cb {
 	__u8		sacked;		/* State flags for SACK.	*/
 	__u8		ip_dsfield;	/* IPv4 tos or IPv6 dsfield	*/
 	__u8		txstamp_ack:1,	/* Record TX timestamp for ack? */
+			txstamp_ack_bpf:1,	/* ack timestamp for bpf use */
 			eor:1,		/* Is skb MSG_EOR marked? */
 			has_rxtstamp:1,	/* SKB has a RX timestamp	*/
-			unused:5;
+			unused:4;
 	__u32		ack_seq;	/* Sequence number ACK'd	*/
 	union {
 		struct {
include/uapi/linux/bpf.h +5 -0
index a6d761f07f67..a0aff1b4eb61 100644
@@ -7032,6 +7032,11 @@ enum {
 					 * feature is on. It indicates the
 					 * recorded timestamp.
 					 */
+	BPF_SOCK_OPS_TS_ACK_OPT_CB,	/* Called when all the skbs are
+					 * acknowledged when SO_TIMESTAMPING
+					 * feature is on. It indicates the
+					 * recorded timestamp.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
net/core/skbuff.c +6 -3
index 73b15d6277f7..48b0c71e9522 100644
@@ -5553,6 +5553,9 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype
 	case SCM_TSTAMP_SND:
 		op = BPF_SOCK_OPS_TS_SW_OPT_CB;
 		break;
+	case SCM_TSTAMP_ACK:
+		op = BPF_SOCK_OPS_TS_ACK_OPT_CB;
+		break;
 	default:
 		return;
 	}
@@ -5632,9 +5635,9 @@ static bool skb_tstamp_is_set(const struct sk_buff *skb, int tstype, bool bpf_mo
 			return true;
 		return false;
 	case SCM_TSTAMP_ACK:
-		if (TCP_SKB_CB(skb)->txstamp_ack)
-			return true;
-		return false;
+		flag = bpf_mode ? TCP_SKB_CB(skb)->txstamp_ack_bpf :
+				  TCP_SKB_CB(skb)->txstamp_ack;
+		return !!flag;
 	}
 
 	return false;
net/ipv4/tcp_input.c +2 -1
index 5bdf13ac26ef..82bb26f5b214 100644
@@ -3321,7 +3321,8 @@ static void tcp_ack_tstamp(struct sock *sk, struct sk_buff *skb,
 	const struct skb_shared_info *shinfo;
 
 	/* Avoid cache line misses to get skb_shinfo() and shinfo->tx_flags */
-	if (likely(!TCP_SKB_CB(skb)->txstamp_ack))
+	if (likely(!TCP_SKB_CB(skb)->txstamp_ack &&
+		   !TCP_SKB_CB(skb)->txstamp_ack_bpf))
 		return;
 
 	shinfo = skb_shinfo(skb);
net/ipv4/tcp_output.c +5 -0
index 5485a70b5fe5..c8927143d3e1 100644
@@ -1552,6 +1552,7 @@ static void tcp_adjust_pcount(struct sock *sk, const struct sk_buff *skb, int de
 static bool tcp_has_tx_tstamp(const struct sk_buff *skb)
 {
 	return TCP_SKB_CB(skb)->txstamp_ack ||
+	       TCP_SKB_CB(skb)->txstamp_ack_bpf ||
 		(skb_shinfo(skb)->tx_flags & SKBTX_ANY_TSTAMP);
 }
 
@@ -1568,7 +1569,9 @@ static void tcp_fragment_tstamp(struct sk_buff *skb, struct sk_buff *skb2)
 		shinfo2->tx_flags |= tsflags;
 		swap(shinfo->tskey, shinfo2->tskey);
 		TCP_SKB_CB(skb2)->txstamp_ack = TCP_SKB_CB(skb)->txstamp_ack;
+		TCP_SKB_CB(skb2)->txstamp_ack_bpf = TCP_SKB_CB(skb)->txstamp_ack_bpf;
 		TCP_SKB_CB(skb)->txstamp_ack = 0;
+		TCP_SKB_CB(skb)->txstamp_ack_bpf = 0;
 	}
 }
 
@@ -3209,6 +3212,8 @@ void tcp_skb_collapse_tstamp(struct sk_buff *skb,
 		shinfo->tskey = next_shinfo->tskey;
 		TCP_SKB_CB(skb)->txstamp_ack |=
 			TCP_SKB_CB(next_skb)->txstamp_ack;
+		TCP_SKB_CB(skb)->txstamp_ack_bpf |=
+			TCP_SKB_CB(next_skb)->txstamp_ack_bpf;
 	}
 }
 
tools/include/uapi/linux/bpf.h +5 -0
index 73fc0a95c9ca..0fe7d663a244 100644
@@ -7025,6 +7025,11 @@ enum {
 					 * feature is on. It indicates the
 					 * recorded timestamp.
 					 */
+	BPF_SOCK_OPS_TS_ACK_OPT_CB,	/* Called when all the skbs are
+					 * acknowledged when SO_TIMESTAMPING
+					 * feature is on. It indicates the
+					 * recorded timestamp.
+					 */
 };
 
 /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
Signature · 1 line
2.37.3
#19 lore raw

Re: [PATCH net-next v4 06/11] net-timestamp: support SCM_TSTAMP_ACK for bpf extension

Quoted 21 lines · Jason Xing

From: Jason Xing <[email protected]>

Handle the ACK timestamp case. Actually testing SKBTX_BPF flag can work, but we need to Introduce a new txstamp_ack_bpf to avoid cache line misses in tcp_ack_tstamp().

---
  include/net/tcp.h              | 3 ++-
  include/uapi/linux/bpf.h       | 5 +++++
  net/core/skbuff.c              | 9 ++++++---
  net/ipv4/tcp_input.c           | 3 ++-
  net/ipv4/tcp_output.c          | 5 +++++
  tools/include/uapi/linux/bpf.h | 5 +++++
  6 files changed, 25 insertions(+), 5 deletions(-)
include/net/tcp.h +0 -0
index e9b37b76e894..8e5103d3c6b9 100644

include/net/tcp.h struct tcp_skb_cb { · line 962

Quoted 4 lines
include/net/tcp.h +1 -0
@@ -959,9 +959,10 @@ struct tcp_skb_cb {
  	__u8		sacked;		/* State flags for SACK.	*/
  	__u8		ip_dsfield;	/* IPv4 tos or IPv6 dsfield	*/
  	__u8		txstamp_ack:1,	/* Record TX timestamp for ack? */
+			txstamp_ack_bpf:1,	/* ack timestamp for bpf use */

After quickly peeking at patch 8, I realize that the new txstamp_ack_bpf bit is not needed. SKBTX_BPF bit (in skb_shinfo(skb)->tx_flags) and the txstamp_ack_bpf are always set together. Then only use the SKBTX_BPF bit should be as good.

Quoted 55 lines
include/net/tcp.h +1 -1
  			eor:1,		/* Is skb MSG_EOR marked? */
  			has_rxtstamp:1,	/* SKB has a RX timestamp	*/
-			unused:5;
+			unused:4;
  	__u32		ack_seq;	/* Sequence number ACK'd	*/
  	union {
  		struct {
include/uapi/linux/bpf.h +5 -0
index a6d761f07f67..a0aff1b4eb61 100644
@@ -7032,6 +7032,11 @@ enum {
  					 * feature is on. It indicates the
  					 * recorded timestamp.
  					 */
+	BPF_SOCK_OPS_TS_ACK_OPT_CB,	/* Called when all the skbs are
+					 * acknowledged when SO_TIMESTAMPING
+					 * feature is on. It indicates the
+					 * recorded timestamp.
+					 */
  };
 
  /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
net/core/skbuff.c +6 -3
index 73b15d6277f7..48b0c71e9522 100644
@@ -5553,6 +5553,9 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype
  	case SCM_TSTAMP_SND:
  		op = BPF_SOCK_OPS_TS_SW_OPT_CB;
  		break;
+	case SCM_TSTAMP_ACK:
+		op = BPF_SOCK_OPS_TS_ACK_OPT_CB;
+		break;
  	default:
  		return;
  	}
@@ -5632,9 +5635,9 @@ static bool skb_tstamp_is_set(const struct sk_buff *skb, int tstype, bool bpf_mo
  			return true;
  		return false;
  	case SCM_TSTAMP_ACK:
-		if (TCP_SKB_CB(skb)->txstamp_ack)
-			return true;
-		return false;
+		flag = bpf_mode ? TCP_SKB_CB(skb)->txstamp_ack_bpf :
+				  TCP_SKB_CB(skb)->txstamp_ack;
+		return !!flag;
  	}
 
  	return false;
net/ipv4/tcp_input.c +0 -0
index 5bdf13ac26ef..82bb26f5b214 100644

net/ipv4/tcp_input.c static void tcp_ack_tstamp(struct sock *sk, struct sk_buff *skb, · line 3325

Quoted 6 lines
net/ipv4/tcp_input.c +2 -1
@@ -3321,7 +3321,8 @@ static void tcp_ack_tstamp(struct sock *sk, struct sk_buff *skb,
  	const struct skb_shared_info *shinfo;
 
  	/* Avoid cache line misses to get skb_shinfo() and shinfo->tx_flags */
-	if (likely(!TCP_SKB_CB(skb)->txstamp_ack))
+	if (likely(!TCP_SKB_CB(skb)->txstamp_ack &&
+		   !TCP_SKB_CB(skb)->txstamp_ack_bpf))

Change the test here to:

	if (likely(!TCP_SKB_CB(skb)->txstamp_ack &&
		   !(skb_shinfo(skb)->tx_flags & SKBTX_BPF)))

Does it make sense?

author
#20 lore raw

Re: [PATCH net-next v4 06/11] net-timestamp: support SCM_TSTAMP_ACK for bpf extension

Quoted 18 lines · Martin KaFai Lau
Quoted 16 lines · Jason Xing

From: Jason Xing <[email protected]>

Handle the ACK timestamp case. Actually testing SKBTX_BPF flag can work, but we need to Introduce a new txstamp_ack_bpf to avoid cache line misses in tcp_ack_tstamp().

---
  include/net/tcp.h              | 3 ++-
  include/uapi/linux/bpf.h       | 5 +++++
  net/core/skbuff.c              | 9 ++++++---
  net/ipv4/tcp_input.c           | 3 ++-
  net/ipv4/tcp_output.c          | 5 +++++
  tools/include/uapi/linux/bpf.h | 5 +++++
  6 files changed, 25 insertions(+), 5 deletions(-)
Quoted 13 lines

include/net/tcp.h struct tcp_skb_cb { · line 962

Quoted 9 lines
include/net/tcp.h +1 -0
index e9b37b76e894..8e5103d3c6b9 100644
@@ -959,9 +959,10 @@ struct tcp_skb_cb {
      __u8            sacked;         /* State flags for SACK.        */
      __u8            ip_dsfield;     /* IPv4 tos or IPv6 dsfield     */
      __u8            txstamp_ack:1,  /* Record TX timestamp for ack? */
+                     txstamp_ack_bpf:1,      /* ack timestamp for bpf use */

After quickly peeking at patch 8, I realize that the new txstamp_ack_bpf bit is not needed. SKBTX_BPF bit (in skb_shinfo(skb)->tx_flags) and the txstamp_ack_bpf are always set together. Then only use the SKBTX_BPF bit should be as good.

Please see the comments below :)

Quoted 58 lines
Quoted 58 lines
include/net/tcp.h +1 -1
                      eor:1,          /* Is skb MSG_EOR marked? */
                      has_rxtstamp:1, /* SKB has a RX timestamp       */
-                     unused:5;
+                     unused:4;
      __u32           ack_seq;        /* Sequence number ACK'd        */
      union {
              struct {
include/uapi/linux/bpf.h +5 -0
index a6d761f07f67..a0aff1b4eb61 100644
@@ -7032,6 +7032,11 @@ enum {
                                       * feature is on. It indicates the
                                       * recorded timestamp.
                                       */
+     BPF_SOCK_OPS_TS_ACK_OPT_CB,     /* Called when all the skbs are
+                                      * acknowledged when SO_TIMESTAMPING
+                                      * feature is on. It indicates the
+                                      * recorded timestamp.
+                                      */
  };
 
  /* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
net/core/skbuff.c +6 -3
index 73b15d6277f7..48b0c71e9522 100644
@@ -5553,6 +5553,9 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype
      case SCM_TSTAMP_SND:
              op = BPF_SOCK_OPS_TS_SW_OPT_CB;
              break;
+     case SCM_TSTAMP_ACK:
+             op = BPF_SOCK_OPS_TS_ACK_OPT_CB;
+             break;
      default:
              return;
      }
@@ -5632,9 +5635,9 @@ static bool skb_tstamp_is_set(const struct sk_buff *skb, int tstype, bool bpf_mo
                      return true;
              return false;
      case SCM_TSTAMP_ACK:
-             if (TCP_SKB_CB(skb)->txstamp_ack)
-                     return true;
-             return false;
+             flag = bpf_mode ? TCP_SKB_CB(skb)->txstamp_ack_bpf :
+                               TCP_SKB_CB(skb)->txstamp_ack;
+             return !!flag;
      }
 
      return false;
net/ipv4/tcp_input.c +0 -0
index 5bdf13ac26ef..82bb26f5b214 100644
@@ -3321,7 +3321,8 @@ static void tcp_ack_tstamp(struct sock *sk, struct sk_buff *skb,
      const struct skb_shared_info *shinfo;
 
Quoted 1 line

net/ipv4/tcp_input.c static void tcp_ack_tstamp(struct sock *sk, struct sk_buff *skb, · line 3323

Quoted 1 line
net/ipv4/tcp_input.c +0 -0
      /* Avoid cache line misses to get skb_shinfo() and shinfo->tx_flags */

Please take a look at the above comment.

Quoted 9 lines

net/ipv4/tcp_input.c static void tcp_ack_tstamp(struct sock *sk, struct sk_buff *skb, · line 3325

Quoted 3 lines
net/ipv4/tcp_input.c +2 -1
-     if (likely(!TCP_SKB_CB(skb)->txstamp_ack))
+     if (likely(!TCP_SKB_CB(skb)->txstamp_ack &&
+                !TCP_SKB_CB(skb)->txstamp_ack_bpf))

Change the test here to:

        if (likely(!TCP_SKB_CB(skb)->txstamp_ack &&
                   !(skb_shinfo(skb)->tx_flags & SKBTX_BPF)))

Does it make sense?

It surely works. Talking about the result only, introducing SKBTX_BPF can work for all the cases. However, in the ACK case, the above code snippet will access the shinfo->tx_flags, which triggers cache line misses. I also mentioned this on purpose in the patch [06/11].

#21 lore raw

Re: [PATCH net-next v4 06/11] net-timestamp: support SCM_TSTAMP_ACK for bpf extension

Quoted 17 lines · Jason Xing
Quoted 8 lines

net/ipv4/tcp_input.c static void tcp_ack_tstamp(struct sock *sk, struct sk_buff *skb, · line 3323

Quoted 8 lines
net/ipv4/tcp_input.c +0 -0
index 5bdf13ac26ef..82bb26f5b214 100644
@@ -3321,7 +3321,8 @@ static void tcp_ack_tstamp(struct sock *sk, struct sk_buff *skb,
       const struct skb_shared_info *shinfo;
 
       /* Avoid cache line misses to get skb_shinfo() and shinfo->tx_flags */

Please take a look at the above comment.

Quoted 7 lines

net/ipv4/tcp_input.c static void tcp_ack_tstamp(struct sock *sk, struct sk_buff *skb, · line 3325

Quoted 3 lines
net/ipv4/tcp_input.c +2 -1
-     if (likely(!TCP_SKB_CB(skb)->txstamp_ack))
+     if (likely(!TCP_SKB_CB(skb)->txstamp_ack &&
+                !TCP_SKB_CB(skb)->txstamp_ack_bpf))

Change the test here to:

         if (likely(!TCP_SKB_CB(skb)->txstamp_ack &&
                    !(skb_shinfo(skb)->tx_flags & SKBTX_BPF)))
Quoted 5 lines
Quoted 1 line

Does it make sense?

It surely works. Talking about the result only, introducing SKBTX_BPF can work for all the cases. However, in the ACK case, the above code snippet will access the shinfo->tx_flags, which triggers cache line misses. I also mentioned this on purpose in the patch [06/11].

ah. my bad. I somehow totally skipped the comment and message in this patch when jumping between patch 6 and 7.

Not an expert. so curious if it matters testing skb_shinfo(skb)->tx_flags or not here? e.g. The tcp_v4_fill_cb() in the earlier rx path, skb_hwtstamps(skb)->hwtstamp is also read. Willem?

author
#22 lore raw

PATCH v4 7/11 net-timestamp: support hwtstamp print for bpf extension

In reply to Jason Xing

From: Jason Xing <[email protected]>

Passing the hwtstamp to bpf prog which can print.

---
 include/net/sock.h |  6 ++++--
 net/core/skbuff.c  | 17 +++++++++++++----
 net/core/sock.c    |  4 +++-
 3 files changed, 20 insertions(+), 7 deletions(-)
include/net/sock.h +4 -2
index f88a00108a2f..9bc883573208 100644
@@ -2921,9 +2921,11 @@ int sock_set_timestamping(struct sock *sk, int optname,
 
 void sock_enable_timestamps(struct sock *sk);
 #if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_SYSCALL)
-void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op);
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op,
+			       u32 nargs, u32 *args);
 #else
-static inline void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+static inline void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op,
+					     u32 nargs, u32 *args)
 {
 }
 #endif
net/core/skbuff.c +13 -4
index 48b0c71e9522..182a44815630 100644
@@ -5539,8 +5539,12 @@ void skb_complete_tx_timestamp(struct sk_buff *skb,
 }
 EXPORT_SYMBOL_GPL(skb_complete_tx_timestamp);
 
-static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype)
+static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb,
+				struct skb_shared_hwtstamps *hwtstamps,
+				int tstype)
 {
+	struct timespec64 tstamp;
+	u32 args[2] = {0, 0};
 	int op;
 
 	if (!sk)
@@ -5552,6 +5556,11 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype
 		break;
 	case SCM_TSTAMP_SND:
 		op = BPF_SOCK_OPS_TS_SW_OPT_CB;
+		if (hwtstamps) {
+			tstamp = ktime_to_timespec64(hwtstamps->hwtstamp);
+			args[0] = tstamp.tv_sec;
+			args[1] = tstamp.tv_nsec;
+		}
 		break;
 	case SCM_TSTAMP_ACK:
 		op = BPF_SOCK_OPS_TS_ACK_OPT_CB;
@@ -5560,7 +5569,7 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype
 		return;
 	}
 
-	bpf_skops_tx_timestamping(sk, skb, op);
+	bpf_skops_tx_timestamping(sk, skb, op, 2, args);
 }
 
 static void skb_tstamp_tx_output(struct sk_buff *orig_skb,
@@ -5651,7 +5660,7 @@ void __skb_tstamp_tx(struct sk_buff *orig_skb,
 	if (unlikely(skb_tstamp_is_set(orig_skb, tstype, false)))
 		skb_tstamp_tx_output(orig_skb, ack_skb, hwtstamps, sk, tstype);
 	if (unlikely(skb_tstamp_is_set(orig_skb, tstype, true)))
-		__skb_tstamp_tx_bpf(sk, orig_skb, tstype);
+		__skb_tstamp_tx_bpf(sk, orig_skb, hwtstamps, tstype);
 }
 EXPORT_SYMBOL_GPL(__skb_tstamp_tx);
 
@@ -5662,7 +5671,7 @@ void skb_tstamp_tx(struct sk_buff *orig_skb,
 
 	skb_tstamp_tx_output(orig_skb, NULL, hwtstamps, orig_skb->sk, tstype);
 	if (unlikely(skb_tstamp_is_set(orig_skb, tstype, true)))
-		__skb_tstamp_tx_bpf(orig_skb->sk, orig_skb, tstype);
+		__skb_tstamp_tx_bpf(orig_skb->sk, orig_skb, hwtstamps, tstype);
 }
 EXPORT_SYMBOL_GPL(skb_tstamp_tx);
 
net/core/sock.c +3 -1
index 79cb5c74c76c..504939bafe0c 100644
@@ -942,7 +942,8 @@ int sock_set_timestamping(struct sock *sk, int optname,
 }
 
 #if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_SYSCALL)
-void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op,
+			       u32 nargs, u32 *args)
 {
 	struct bpf_sock_ops_kern sock_ops;
 
@@ -952,6 +953,7 @@ void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
 	sock_ops.op = op;
 	sock_ops.is_fullsock = 1;
 	sock_ops.sk = sk;
+	memcpy(sock_ops.args, args, nargs * sizeof(*args));
 	__cgroup_bpf_run_filter_sock_ops(sk, &sock_ops, CGROUP_SOCK_OPS);
 }
 #endif
Signature · 1 line
2.37.3
#23 lore raw

Re: [PATCH net-next v4 07/11] net-timestamp: support hwtstamp print for bpf extension

Quoted 48 lines · Jason Xing

From: Jason Xing <[email protected]>

Passing the hwtstamp to bpf prog which can print.

---
  include/net/sock.h |  6 ++++--
  net/core/skbuff.c  | 17 +++++++++++++----
  net/core/sock.c    |  4 +++-
  3 files changed, 20 insertions(+), 7 deletions(-)
include/net/sock.h +4 -2
index f88a00108a2f..9bc883573208 100644
@@ -2921,9 +2921,11 @@ int sock_set_timestamping(struct sock *sk, int optname,
 
  void sock_enable_timestamps(struct sock *sk);
  #if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_SYSCALL)
-void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op);
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op,
+			       u32 nargs, u32 *args);
  #else
-static inline void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+static inline void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op,
+					     u32 nargs, u32 *args)
  {
  }
  #endif
net/core/skbuff.c +5 -1
index 48b0c71e9522..182a44815630 100644
@@ -5539,8 +5539,12 @@ void skb_complete_tx_timestamp(struct sk_buff *skb,
  }
  EXPORT_SYMBOL_GPL(skb_complete_tx_timestamp);
 
-static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype)
+static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb,
+				struct skb_shared_hwtstamps *hwtstamps,
+				int tstype)
  {
+	struct timespec64 tstamp;
+	u32 args[2] = {0, 0};
  	int op;
 
  	if (!sk)

net/core/skbuff.c static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype · line 5561

Quoted 6 lines
net/core/skbuff.c +2 -0
@@ -5552,6 +5556,11 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype
  		break;
  	case SCM_TSTAMP_SND:
  		op = BPF_SOCK_OPS_TS_SW_OPT_CB;
 
+		if (hwtstamps) {
+			tstamp = ktime_to_timespec64(hwtstamps->hwtstamp);

Avoid this conversion which is likely not useful to the bpf prog. Directly pass hwtstamps->hwtstamp (in ns?) to the bpf prog. Put lower 32bits in args[0] and higher 32bits in args[1].

Also, how about adding a BPF_SOCK_OPS_TS_"HW"_OPT_CB for the "hwtstamps != NULL" case instead of reusing the BPF_SOCK_OPS_TS_"SW"_OPT_CB?

A more subtle thing for the hwtstamps case is, afaik the bpf prog will not be called. All drivers are still only testing SKBTX_HW_TSTAMP instead of testing (SKBTX_HW_TSTAMP | SKBTX_BPF).

There are a lot of drivers to change though. A quick thought is to rename the existing SKBTX_HW_TSTAMP (e.g. __SKBTX_HW_TSTAMP = 1 << 0) and define SKBTX_HW_TSTAMP like:

#define SKBTX_HW_TSTAMP (__SKBTX_HW_TSTAMP | SKBTX_BPF)

Then change some of the existing skb_shinfo(skb)->tx_flags "setting" site to use __SKBTX_HW_TSTAMP instead. e.g. in __sock_tx_timestamp(). Not very pretty but may be still better than changing many drivers. May be there is a better way...

While talking about where to test the SKBTX_BPF bit, I wonder if the new skb_tstamp_is_set() is needed. For the non SKBTX_HW_TSTAMP case, the number of tx_flags testing sites should be limited, so should be easy to add the SKBTX_BPF bit test. e.g. at the __dev_queue_xmit, test "if (unlikely(skb_shinfo(skb)->tx_flags & (SKBTX_SCHED_TSTAMP | SKBTX_BPF)))". Patch 6 has also tested the bpf specific bit at tcp_ack_tstamp() before calling the __skb_tstamp_tx().

At the beginning of __skb_tstamp_tx(), do something like this:

void __skb_tstamp_tx(struct sk_buff *orig_skb,
const struct sk_buff *ack_skb, struct skb_shared_hwtstamps *hwtstamps, struct sock *sk, int tstype)

{
	if (cgroup_bpf_enabled(CGROUP_SOCK_OPS) &&
	    unlikely(skb_shinfo(skb)->tx_flags & SKBTX_BPF))
		__skb_tstamp_tx_bpf(sk, orig_skb, hwtstamps, tstype);

	if (unlikely(!(skb_shinfo(skb)->tx_flags & ~SKBTX_BPF)))
		return;

Then the new skb_tstamp_tx_output() shuffle is probably not be needed also.

Quoted 38 lines
net/core/skbuff.c +3 -0
+			args[0] = tstamp.tv_sec;
+			args[1] = tstamp.tv_nsec;
+		}
  		break;
  	case SCM_TSTAMP_ACK:
  		op = BPF_SOCK_OPS_TS_ACK_OPT_CB;
net/core/skbuff.c +3 -3
@@ -5560,7 +5569,7 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype
  		return;
  	}
 
-	bpf_skops_tx_timestamping(sk, skb, op);
+	bpf_skops_tx_timestamping(sk, skb, op, 2, args);
  }
 
  static void skb_tstamp_tx_output(struct sk_buff *orig_skb,
@@ -5651,7 +5660,7 @@ void __skb_tstamp_tx(struct sk_buff *orig_skb,
  	if (unlikely(skb_tstamp_is_set(orig_skb, tstype, false)))
  		skb_tstamp_tx_output(orig_skb, ack_skb, hwtstamps, sk, tstype);
  	if (unlikely(skb_tstamp_is_set(orig_skb, tstype, true)))
-		__skb_tstamp_tx_bpf(sk, orig_skb, tstype);
+		__skb_tstamp_tx_bpf(sk, orig_skb, hwtstamps, tstype);
  }
  EXPORT_SYMBOL_GPL(__skb_tstamp_tx);
 
@@ -5662,7 +5671,7 @@ void skb_tstamp_tx(struct sk_buff *orig_skb,
 
  	skb_tstamp_tx_output(orig_skb, NULL, hwtstamps, orig_skb->sk, tstype);
  	if (unlikely(skb_tstamp_is_set(orig_skb, tstype, true)))
-		__skb_tstamp_tx_bpf(orig_skb->sk, orig_skb, tstype);
+		__skb_tstamp_tx_bpf(orig_skb->sk, orig_skb, hwtstamps, tstype);
  }
  EXPORT_SYMBOL_GPL(skb_tstamp_tx);
 
net/core/sock.c +0 -0
index 79cb5c74c76c..504939bafe0c 100644

net/core/sock.c int sock_set_timestamping(struct sock *sk, int optname, · line 946

Quoted 6 lines
net/core/sock.c +2 -1
@@ -942,7 +942,8 @@ int sock_set_timestamping(struct sock *sk, int optname,
  }
 
  #if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_SYSCALL)
-void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op,
+			       u32 nargs, u32 *args)

Directly pass hwtstamps->hwtstamp instead of args and nargs. Save a memcpy below.

Quoted 11 lines
net/core/sock.c +1 -0
  {
  	struct bpf_sock_ops_kern sock_ops;
 
@@ -952,6 +953,7 @@ void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
  	sock_ops.op = op;
  	sock_ops.is_fullsock = 1;
  	sock_ops.sk = sk;
+	memcpy(sock_ops.args, args, nargs * sizeof(*args));
  	__cgroup_bpf_run_filter_sock_ops(sk, &sock_ops, CGROUP_SOCK_OPS);
  }
  #endif
#24 lore raw

Re: [PATCH net-next v4 07/11] net-timestamp: support hwtstamp print for bpf extension

Quoted 24 lines · Martin KaFai Lau

A more subtle thing for the hwtstamps case is, afaik the bpf prog will not be called. All drivers are still only testing SKBTX_HW_TSTAMP instead of testing (SKBTX_HW_TSTAMP | SKBTX_BPF).

There are a lot of drivers to change though. A quick thought is to rename the existing SKBTX_HW_TSTAMP (e.g. __SKBTX_HW_TSTAMP = 1 << 0) and define SKBTX_HW_TSTAMP like:

#define SKBTX_HW_TSTAMP (__SKBTX_HW_TSTAMP | SKBTX_BPF)

Then change some of the existing skb_shinfo(skb)->tx_flags "setting" site to use __SKBTX_HW_TSTAMP instead. e.g. in __sock_tx_timestamp(). Not very pretty but may be still better than changing many drivers. May be there is a better way...

While talking about where to test the SKBTX_BPF bit, I wonder if the new skb_tstamp_is_set() is needed. For the non SKBTX_HW_TSTAMP case, the number of tx_flags testing sites should be limited, so should be easy to add the SKBTX_BPF bit test. e.g. at the __dev_queue_xmit, test "if (unlikely(skb_shinfo(skb)-

Quoted 1 line

tx_flags & (SKBTX_SCHED_TSTAMP | SKBTX_BPF)))". Patch 6 has also tested the

bpf specific bit at tcp_ack_tstamp() before calling the __skb_tstamp_tx().

At the beginning of __skb_tstamp_tx(), do something like this:

void __skb_tstamp_tx(struct sk_buff *orig_skb,
             const struct sk_buff *ack_skb,
             struct skb_shared_hwtstamps *hwtstamps, struct sock *sk, int tstype)
{
    if (cgroup_bpf_enabled(CGROUP_SOCK_OPS) && unlikely(skb_shinfo(skb)->tx_flags & SKBTX_BPF)) __skb_tstamp_tx_bpf(sk, orig_skb, hwtstamps, tstype);

Quoted 1 line

    if (unlikely(!(skb_shinfo(skb)->tx_flags & ~SKBTX_BPF)))

This is not enough. I was wrong here. The test in skb_tstamp_is_set() is needed when SKBTX_BPF is not set.

Quoted 1 line

        return;

author
#25 lore raw

Re: [PATCH net-next v4 07/11] net-timestamp: support hwtstamp print for bpf extension

In reply to Martin KaFai Lau
Quoted 54 lines · Martin KaFai Lau
Quoted 51 lines · Jason Xing

From: Jason Xing <[email protected]>

Passing the hwtstamp to bpf prog which can print.

---
  include/net/sock.h |  6 ++++--
  net/core/skbuff.c  | 17 +++++++++++++----
  net/core/sock.c    |  4 +++-
  3 files changed, 20 insertions(+), 7 deletions(-)
include/net/sock.h +4 -2
index f88a00108a2f..9bc883573208 100644
@@ -2921,9 +2921,11 @@ int sock_set_timestamping(struct sock *sk, int optname,
 
  void sock_enable_timestamps(struct sock *sk);
  #if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_SYSCALL)
-void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op);
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op,
+                            u32 nargs, u32 *args);
  #else
-static inline void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+static inline void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op,
+                                          u32 nargs, u32 *args)
  {
  }
  #endif
net/core/skbuff.c +5 -1
index 48b0c71e9522..182a44815630 100644
@@ -5539,8 +5539,12 @@ void skb_complete_tx_timestamp(struct sk_buff *skb,
  }
  EXPORT_SYMBOL_GPL(skb_complete_tx_timestamp);
 
-static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype)
+static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb,
+                             struct skb_shared_hwtstamps *hwtstamps,
+                             int tstype)
  {
+     struct timespec64 tstamp;
+     u32 args[2] = {0, 0};
      int op;
 
      if (!sk)
@@ -5552,6 +5556,11 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype
              break;
      case SCM_TSTAMP_SND:
              op = BPF_SOCK_OPS_TS_SW_OPT_CB;
Quoted 6 lines

net/core/skbuff.c static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype · line 5560

Quoted 2 lines
net/core/skbuff.c +2 -0
+             if (hwtstamps) {
+                     tstamp = ktime_to_timespec64(hwtstamps->hwtstamp);

Avoid this conversion which is likely not useful to the bpf prog. Directly pass hwtstamps->hwtstamp (in ns?) to the bpf prog. Put lower 32bits in args[0] and higher 32bits in args[1].

It makes sense.

Quoted 3 lines

Also, how about adding a BPF_SOCK_OPS_TS_"HW"_OPT_CB for the "hwtstamps != NULL" case instead of reusing the BPF_SOCK_OPS_TS_"SW"_OPT_CB?

Good suggestion. Will do that.

Quoted 4 lines

A more subtle thing for the hwtstamps case is, afaik the bpf prog will not be called. All drivers are still only testing SKBTX_HW_TSTAMP instead of testing (SKBTX_HW_TSTAMP | SKBTX_BPF).

Ah, I didn't realize that!!

Quoted 6 lines

There are a lot of drivers to change though. A quick thought is to rename the existing SKBTX_HW_TSTAMP (e.g. __SKBTX_HW_TSTAMP = 1 << 0) and define SKBTX_HW_TSTAMP like:

#define SKBTX_HW_TSTAMP (__SKBTX_HW_TSTAMP | SKBTX_BPF)

I will take it, thanks!

Quoted 4 lines

Then change some of the existing skb_shinfo(skb)->tx_flags "setting" site to use __SKBTX_HW_TSTAMP instead. e.g. in __sock_tx_timestamp(). Not very pretty but may be still better than changing many drivers. May be there is a better way...

I agree with your approach. Changing so many drivers would be a head-ache thing.

Quoted 84 lines

While talking about where to test the SKBTX_BPF bit, I wonder if the new skb_tstamp_is_set() is needed. For the non SKBTX_HW_TSTAMP case, the number of tx_flags testing sites should be limited, so should be easy to add the SKBTX_BPF bit test. e.g. at the __dev_queue_xmit, test "if (unlikely(skb_shinfo(skb)->tx_flags & (SKBTX_SCHED_TSTAMP | SKBTX_BPF)))". Patch 6 has also tested the bpf specific bit at tcp_ack_tstamp() before calling the __skb_tstamp_tx().

At the beginning of __skb_tstamp_tx(), do something like this:

void __skb_tstamp_tx(struct sk_buff *orig_skb,
const struct sk_buff *ack_skb, struct skb_shared_hwtstamps *hwtstamps, struct sock *sk, int tstype)

{
        if (cgroup_bpf_enabled(CGROUP_SOCK_OPS) &&
            unlikely(skb_shinfo(skb)->tx_flags & SKBTX_BPF))
                __skb_tstamp_tx_bpf(sk, orig_skb, hwtstamps, tstype);

        if (unlikely(!(skb_shinfo(skb)->tx_flags & ~SKBTX_BPF)))
                return;

Then the new skb_tstamp_tx_output() shuffle is probably not be needed also.

Quoted 38 lines
net/core/skbuff.c +6 -3
+                     args[0] = tstamp.tv_sec;
+                     args[1] = tstamp.tv_nsec;
+             }
              break;
      case SCM_TSTAMP_ACK:
              op = BPF_SOCK_OPS_TS_ACK_OPT_CB;
@@ -5560,7 +5569,7 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype
              return;
      }
 
-     bpf_skops_tx_timestamping(sk, skb, op);
+     bpf_skops_tx_timestamping(sk, skb, op, 2, args);
  }
 
  static void skb_tstamp_tx_output(struct sk_buff *orig_skb,
@@ -5651,7 +5660,7 @@ void __skb_tstamp_tx(struct sk_buff *orig_skb,
      if (unlikely(skb_tstamp_is_set(orig_skb, tstype, false)))
              skb_tstamp_tx_output(orig_skb, ack_skb, hwtstamps, sk, tstype);
      if (unlikely(skb_tstamp_is_set(orig_skb, tstype, true)))
-             __skb_tstamp_tx_bpf(sk, orig_skb, tstype);
+             __skb_tstamp_tx_bpf(sk, orig_skb, hwtstamps, tstype);
  }
  EXPORT_SYMBOL_GPL(__skb_tstamp_tx);
 
@@ -5662,7 +5671,7 @@ void skb_tstamp_tx(struct sk_buff *orig_skb,
 
      skb_tstamp_tx_output(orig_skb, NULL, hwtstamps, orig_skb->sk, tstype);
      if (unlikely(skb_tstamp_is_set(orig_skb, tstype, true)))
-             __skb_tstamp_tx_bpf(orig_skb->sk, orig_skb, tstype);
+             __skb_tstamp_tx_bpf(orig_skb->sk, orig_skb, hwtstamps, tstype);
  }
  EXPORT_SYMBOL_GPL(skb_tstamp_tx);
 
net/core/sock.c +0 -0
index 79cb5c74c76c..504939bafe0c 100644

net/core/sock.c int sock_set_timestamping(struct sock *sk, int optname, · line 946

Quoted 6 lines
net/core/sock.c +2 -1
@@ -942,7 +942,8 @@ int sock_set_timestamping(struct sock *sk, int optname,
  }
 
  #if defined(CONFIG_CGROUP_BPF) && defined(CONFIG_BPF_SYSCALL)
-void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
+void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op,
+                            u32 nargs, u32 *args)

Directly pass hwtstamps->hwtstamp instead of args and nargs. Save a memcpy below.

Quoted 11 lines
net/core/sock.c +1 -0
  {
      struct bpf_sock_ops_kern sock_ops;
 
@@ -952,6 +953,7 @@ void bpf_skops_tx_timestamping(struct sock *sk, struct sk_buff *skb, int op)
      sock_ops.op = op;
      sock_ops.is_fullsock = 1;
      sock_ops.sk = sk;
+     memcpy(sock_ops.args, args, nargs * sizeof(*args));
      __cgroup_bpf_run_filter_sock_ops(sk, &sock_ops, CGROUP_SOCK_OPS);
  }
  #endif
#26 lore raw

Re: [PATCH net-next v4 07/11] net-timestamp: support hwtstamp print for bpf extension

Quoted 19 lines · Jason Xing
Quoted 9 lines
Quoted 9 lines
net/core/skbuff.c +5 -1
-static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype)
+static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb,
+                             struct skb_shared_hwtstamps *hwtstamps,
+                             int tstype)
   {
+     struct timespec64 tstamp;
+     u32 args[2] = {0, 0};
       int op;
Quoted 10 lines

net/core/skbuff.c static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype · line 5560

Quoted 7 lines
       if (!sk)
net/core/skbuff.c +2 -0
@@ -5552,6 +5556,11 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype
               break;
       case SCM_TSTAMP_SND:
               op = BPF_SOCK_OPS_TS_SW_OPT_CB;
+             if (hwtstamps) {
+                     tstamp = ktime_to_timespec64(hwtstamps->hwtstamp);

Avoid this conversion which is likely not useful to the bpf prog. Directly pass hwtstamps->hwtstamp (in ns?) to the bpf prog. Put lower 32bits in args[0] and higher 32bits in args[1].

Quoted 1 line

It makes sense.

When replying the patch 2 thread, I noticed it may not even have to pass the hwtstamps in args here.

Can "*skb_hwtstamps(skb) = *hwtstamps;" be done before calling the bpf prog? Then the bpf prog can directly get it from skb_shinfo(skb)->hwtstamps.
It is like reading other fields in skb_shinfo(skb), e.g. the skb_shinfo(skb)->tskey discussed in patch 10. The bpf prog will have a more consistent experience in reading different fields of the skb_shinfo(skb). skb_shinfo(skb)->hwtstamps is a more intuitive place to obtain the hwtstamp than the broken up args[0] and args[1]. On top of that, there is also an older "skb_hwtstamp" field in "struct bpf_sock_ops".

author
#27 lore raw

Re: [PATCH net-next v4 07/11] net-timestamp: support hwtstamp print for bpf extension

Quoted 26 lines · Martin KaFai Lau
Quoted 19 lines · Jason Xing
Quoted 9 lines
Quoted 9 lines
net/core/skbuff.c +5 -1
-static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype)
+static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb,
+                             struct skb_shared_hwtstamps *hwtstamps,
+                             int tstype)
   {
+     struct timespec64 tstamp;
+     u32 args[2] = {0, 0};
       int op;
Quoted 10 lines

net/core/skbuff.c static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype · line 5560

Quoted 7 lines
       if (!sk)
net/core/skbuff.c +2 -0
@@ -5552,6 +5556,11 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype
               break;
       case SCM_TSTAMP_SND:
               op = BPF_SOCK_OPS_TS_SW_OPT_CB;
+             if (hwtstamps) {
+                     tstamp = ktime_to_timespec64(hwtstamps->hwtstamp);

Avoid this conversion which is likely not useful to the bpf prog. Directly pass hwtstamps->hwtstamp (in ns?) to the bpf prog. Put lower 32bits in args[0] and higher 32bits in args[1].

Quoted 1 line

It makes sense.

When replying the patch 2 thread, I noticed it may not even have to pass the hwtstamps in args here.

Quoted 8 lines

Can "*skb_hwtstamps(skb) = *hwtstamps;" be done before calling the bpf prog? Then the bpf prog can directly get it from skb_shinfo(skb)->hwtstamps. It is like reading other fields in skb_shinfo(skb), e.g. the skb_shinfo(skb)->tskey discussed in patch 10. The bpf prog will have a more consistent experience in reading different fields of the skb_shinfo(skb). skb_shinfo(skb)->hwtstamps is a more intuitive place to obtain the hwtstamp than the broken up args[0] and args[1]. On top of that, there is also an older "skb_hwtstamp" field in "struct bpf_sock_ops".

Right, right, last night, fortunately, I also spotted it. Let the bpf prog parse the shared info from skb then. A new callback for hwtstamp is needed, I suppose.

#28 lore raw

Re: [PATCH net-next v4 07/11] net-timestamp: support hwtstamp print for bpf extension

Quoted 36 lines · Jason Xing
Quoted 26 lines · Martin KaFai Lau
Quoted 19 lines · Jason Xing
Quoted 9 lines
Quoted 9 lines
net/core/skbuff.c +5 -1
-static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype)
+static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb,
+                             struct skb_shared_hwtstamps *hwtstamps,
+                             int tstype)
    {
+     struct timespec64 tstamp;
+     u32 args[2] = {0, 0};
        int op;
Quoted 10 lines

net/core/skbuff.c static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype · line 5560

Quoted 7 lines
        if (!sk)
net/core/skbuff.c +2 -0
@@ -5552,6 +5556,11 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype
                break;
        case SCM_TSTAMP_SND:
                op = BPF_SOCK_OPS_TS_SW_OPT_CB;
+             if (hwtstamps) {
+                     tstamp = ktime_to_timespec64(hwtstamps->hwtstamp);

Avoid this conversion which is likely not useful to the bpf prog. Directly pass hwtstamps->hwtstamp (in ns?) to the bpf prog. Put lower 32bits in args[0] and higher 32bits in args[1].

Quoted 1 line

It makes sense.

When replying the patch 2 thread, I noticed it may not even have to pass the hwtstamps in args here.

Quoted 8 lines

Can "*skb_hwtstamps(skb) = *hwtstamps;" be done before calling the bpf prog? Then the bpf prog can directly get it from skb_shinfo(skb)->hwtstamps. It is like reading other fields in skb_shinfo(skb), e.g. the skb_shinfo(skb)->tskey discussed in patch 10. The bpf prog will have a more consistent experience in reading different fields of the skb_shinfo(skb). skb_shinfo(skb)->hwtstamps is a more intuitive place to obtain the hwtstamp than the broken up args[0] and args[1]. On top of that, there is also an older "skb_hwtstamp" field in "struct bpf_sock_ops".

Quoted 3 lines

Right, right, last night, fortunately, I also spotted it. Let the bpf prog parse the shared info from skb then. A new callback for hwtstamp is needed, I suppose.

Why a new callback is needed? "*skb_hwtstamps(skb) = *hwtstamps;" cannot be done in __skb_tstamp_tx_bpf?

author
#29 lore raw

Re: [PATCH net-next v4 07/11] net-timestamp: support hwtstamp print for bpf extension

Quoted 38 lines · Martin KaFai Lau
Quoted 36 lines · Jason Xing
Quoted 34 lines · Martin KaFai Lau
Quoted 19 lines · Jason Xing
Quoted 9 lines
Quoted 9 lines
net/core/skbuff.c +5 -1
-static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype)
+static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb,
+                             struct skb_shared_hwtstamps *hwtstamps,
+                             int tstype)
    {
+     struct timespec64 tstamp;
+     u32 args[2] = {0, 0};
        int op;
Quoted 10 lines

net/core/skbuff.c static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype · line 5560

Quoted 7 lines
        if (!sk)
net/core/skbuff.c +2 -0
@@ -5552,6 +5556,11 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, int tstype
                break;
        case SCM_TSTAMP_SND:
                op = BPF_SOCK_OPS_TS_SW_OPT_CB;
+             if (hwtstamps) {
+                     tstamp = ktime_to_timespec64(hwtstamps->hwtstamp);

Avoid this conversion which is likely not useful to the bpf prog. Directly pass hwtstamps->hwtstamp (in ns?) to the bpf prog. Put lower 32bits in args[0] and higher 32bits in args[1].

Quoted 1 line

It makes sense.

When replying the patch 2 thread, I noticed it may not even have to pass the hwtstamps in args here.

Can "*skb_hwtstamps(skb) = *hwtstamps;" be done before calling the bpf prog? Then the bpf prog can directly get it from skb_shinfo(skb)->hwtstamps. It is like reading other fields in skb_shinfo(skb), e.g. the skb_shinfo(skb)->tskey discussed in patch 10. The bpf prog will have a more consistent experience in reading different fields of the skb_shinfo(skb). skb_shinfo(skb)->hwtstamps is a more intuitive place to obtain the hwtstamp than the broken up args[0] and args[1]. On top of that, there is also an older "skb_hwtstamp" field in "struct bpf_sock_ops".

Quoted 6 lines
Quoted 3 lines

Right, right, last night, fortunately, I also spotted it. Let the bpf prog parse the shared info from skb then. A new callback for hwtstamp is needed, I suppose.

Why a new callback is needed? "*skb_hwtstamps(skb) = *hwtstamps;" cannot be done in __skb_tstamp_tx_bpf?

Oh, I have no preference on this point. I will abort adding a new callback then.

author
#30 lore raw

PATCH v4 8/11 net-timestamp: make TCP tx timestamp bpf extension work

In reply to Jason Xing

From: Jason Xing <[email protected]>

Make the whole small feature work finally. After this, user can fully use the bpf prog trace the tx path for TCP type.

---
 net/ipv4/tcp.c | 9 +++++++++
 1 file changed, 9 insertions(+)
net/ipv4/tcp.c +9 -0
index 0d704bda6c41..0a41006b10d1 100644
@@ -492,6 +492,15 @@ static void tcp_tx_timestamp(struct sock *sk, struct sockcm_cookie *sockc)
 		if (tsflags & SOF_TIMESTAMPING_TX_RECORD_MASK)
 			shinfo->tskey = TCP_SKB_CB(skb)->seq + skb->len - 1;
 	}
+
+	if (SK_BPF_CB_FLAG_TEST(sk, SK_BPF_CB_TX_TIMESTAMPING) && skb) {
+		struct skb_shared_info *shinfo = skb_shinfo(skb);
+		struct tcp_skb_cb *tcb = TCP_SKB_CB(skb);
+
+		tcb->txstamp_ack_bpf = 1;
+		shinfo->tx_flags |= SKBTX_BPF;
+		shinfo->tskey = TCP_SKB_CB(skb)->seq + skb->len - 1;
+	}
 }
 
 static bool tcp_stream_is_readable(struct sock *sk, int target)
Signature · 1 line
2.37.3
author
#31 lore raw

PATCH v4 9/11 net-timestamp: introduce cgroup lock to avoid affecting non-bpf cases

In reply to Jason Xing

From: Jason Xing <[email protected]>

Introducing the lock to avoid affecting the applications which are not using timestamping bpf feature.

---
 net/core/skbuff.c | 6 ++++--
 net/ipv4/tcp.c    | 3 ++-
 2 files changed, 6 insertions(+), 3 deletions(-)
net/core/skbuff.c +4 -2
index 182a44815630..7c59ef501c74 100644
@@ -5659,7 +5659,8 @@ void __skb_tstamp_tx(struct sk_buff *orig_skb,
 {
 	if (unlikely(skb_tstamp_is_set(orig_skb, tstype, false)))
 		skb_tstamp_tx_output(orig_skb, ack_skb, hwtstamps, sk, tstype);
-	if (unlikely(skb_tstamp_is_set(orig_skb, tstype, true)))
+	if (cgroup_bpf_enabled(CGROUP_SOCK_OPS) &&
+	    unlikely(skb_tstamp_is_set(orig_skb, tstype, true)))
 		__skb_tstamp_tx_bpf(sk, orig_skb, hwtstamps, tstype);
 }
 EXPORT_SYMBOL_GPL(__skb_tstamp_tx);
@@ -5670,7 +5671,8 @@ void skb_tstamp_tx(struct sk_buff *orig_skb,
 	int tstype = SCM_TSTAMP_SND;
 
 	skb_tstamp_tx_output(orig_skb, NULL, hwtstamps, orig_skb->sk, tstype);
-	if (unlikely(skb_tstamp_is_set(orig_skb, tstype, true)))
+	if (cgroup_bpf_enabled(CGROUP_SOCK_OPS) &&
+	    unlikely(skb_tstamp_is_set(orig_skb, tstype, true)))
 		__skb_tstamp_tx_bpf(orig_skb->sk, orig_skb, hwtstamps, tstype);
 }
 EXPORT_SYMBOL_GPL(skb_tstamp_tx);
net/ipv4/tcp.c +2 -1
index 0a41006b10d1..3df802410ebf 100644
@@ -493,7 +493,8 @@ static void tcp_tx_timestamp(struct sock *sk, struct sockcm_cookie *sockc)
 			shinfo->tskey = TCP_SKB_CB(skb)->seq + skb->len - 1;
 	}
 
-	if (SK_BPF_CB_FLAG_TEST(sk, SK_BPF_CB_TX_TIMESTAMPING) && skb) {
+	if (cgroup_bpf_enabled(CGROUP_SOCK_OPS) &&
+	    SK_BPF_CB_FLAG_TEST(sk, SK_BPF_CB_TX_TIMESTAMPING) && skb) {
 		struct skb_shared_info *shinfo = skb_shinfo(skb);
 		struct tcp_skb_cb *tcb = TCP_SKB_CB(skb);
 
Signature · 1 line
2.37.3
author
#32 lore raw

PATCH v4 10/11 net-timestamp: export the tskey for TCP bpf extension

In reply to Jason Xing

From: Jason Xing <[email protected]>

For now, there are three phases where we are not able to fetch the right seqno from the skops->skb_data, because:
1) in __dev_queue_xmit(), the skb->data doesn't point to the start offset in tcp header.
2) in tcp_ack_tstamp(), the skb doesn't have the tcp header.

In the long run, we may add other trace points for bpf extension. And the shinfo->tskey is always the same value for both bpf and non-bpf cases. With that said, let's directly use shinfo->tskey for TCP protocol.

---
 net/core/skbuff.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
net/core/skbuff.c +5 -2
index 7c59ef501c74..2e13643f791c 100644
@@ -5544,7 +5544,7 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb,
 				int tstype)
 {
 	struct timespec64 tstamp;
-	u32 args[2] = {0, 0};
+	u32 args[3] = {0, 0, 0};
 	int op;
 
 	if (!sk)
@@ -5569,7 +5569,10 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb,
 		return;
 	}
 
-	bpf_skops_tx_timestamping(sk, skb, op, 2, args);
+	if (sk_is_tcp(sk))
+		args[2] = skb_shinfo(skb)->tskey;
+
+	bpf_skops_tx_timestamping(sk, skb, op, 3, args);
 }
 
 static void skb_tstamp_tx_output(struct sk_buff *orig_skb,
Signature · 1 line
2.37.3
#33 lore raw

Re: [PATCH net-next v4 10/11] net-timestamp: export the tskey for TCP bpf extension

Quoted 32 lines · Jason Xing

From: Jason Xing <[email protected]>

For now, there are three phases where we are not able to fetch the right seqno from the skops->skb_data, because:
1) in __dev_queue_xmit(), the skb->data doesn't point to the start offset in tcp header.
2) in tcp_ack_tstamp(), the skb doesn't have the tcp header.

In the long run, we may add other trace points for bpf extension. And the shinfo->tskey is always the same value for both bpf and non-bpf cases. With that said, let's directly use shinfo->tskey for TCP protocol.

---
  net/core/skbuff.c | 7 +++++--
  1 file changed, 5 insertions(+), 2 deletions(-)
net/core/skbuff.c +1 -1
index 7c59ef501c74..2e13643f791c 100644
@@ -5544,7 +5544,7 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb,
  				int tstype)
  {
  	struct timespec64 tstamp;
-	u32 args[2] = {0, 0};
+	u32 args[3] = {0, 0, 0};
  	int op;
 
  	if (!sk)

net/core/skbuff.c static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, · line 5573

Quoted 6 lines
net/core/skbuff.c +2 -1
@@ -5569,7 +5569,10 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb,
  		return;
  	}
 
-	bpf_skops_tx_timestamping(sk, skb, op, 2, args);
+	if (sk_is_tcp(sk))
+		args[2] = skb_shinfo(skb)->tskey;

Instead of only passing one info "skb_shinfo(skb)->tskey" of a skb, pass the whole skb ptr to the bpf prog. Take a look at bpf_skops_init_skb. Lets start with end_offset = 0 for now so that the bpf prog won't use it to read the skb->data. It can be revisited later.

	bpf_skops_init_skb(&sock_ops, skb, 0);

The bpf prog can use bpf_cast_to_kern_ctx() and bpf_core_cast() to get to the skb_shinfo(skb). Take a look at the md_skb example in type_cast.c.

Then it needs to add a bpf_sock->op check to the existing bpf_sock_ops_{load,store}_hdr_opt() helpers to ensure these helpers can only be used by the BPF_SOCK_OPS_PARSE_HDR_OPT_CB, BPF_SOCK_OPS_HDR_OPT_LEN_CB, and BPF_SOCK_OPS_WRITE_HDR_OPT_CB callback.

btw, how is the ack_skb used for the SCM_TSTAMP_ACK by the user space now?

author
#34 lore raw

Re: [PATCH net-next v4 10/11] net-timestamp: export the tskey for TCP bpf extension

Quoted 46 lines · Martin KaFai Lau
Quoted 32 lines · Jason Xing

From: Jason Xing <[email protected]>

For now, there are three phases where we are not able to fetch the right seqno from the skops->skb_data, because:
1) in __dev_queue_xmit(), the skb->data doesn't point to the start offset in tcp header.
2) in tcp_ack_tstamp(), the skb doesn't have the tcp header.

In the long run, we may add other trace points for bpf extension. And the shinfo->tskey is always the same value for both bpf and non-bpf cases. With that said, let's directly use shinfo->tskey for TCP protocol.

---
  net/core/skbuff.c | 7 +++++--
  1 file changed, 5 insertions(+), 2 deletions(-)
net/core/skbuff.c +1 -1
index 7c59ef501c74..2e13643f791c 100644
@@ -5544,7 +5544,7 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb,
                              int tstype)
  {
      struct timespec64 tstamp;
-     u32 args[2] = {0, 0};
+     u32 args[3] = {0, 0, 0};
      int op;
 
      if (!sk)

net/core/skbuff.c static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, · line 5573

Quoted 6 lines
net/core/skbuff.c +2 -1
@@ -5569,7 +5569,10 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb,
              return;
      }
 
-     bpf_skops_tx_timestamping(sk, skb, op, 2, args);
+     if (sk_is_tcp(sk))
+             args[2] = skb_shinfo(skb)->tskey;

Instead of only passing one info "skb_shinfo(skb)->tskey" of a skb, pass the whole skb ptr to the bpf prog. Take a look at bpf_skops_init_skb. Lets start with end_offset = 0 for now so that the bpf prog won't use it to read the skb->data. It can be revisited later.

Quoted 4 lines
        bpf_skops_init_skb(&sock_ops, skb, 0);

The bpf prog can use bpf_cast_to_kern_ctx() and bpf_core_cast() to get to the skb_shinfo(skb). Take a look at the md_skb example in type_cast.c.

Sorry, I didn't give it much thought on getting to the shinfo. That's why I quickly gave up using bpf_skops_init_skb() after I noticed the seq of skb is always zero :(

I will test it tomorrow. Thanks.

Quoted 5 lines

Then it needs to add a bpf_sock->op check to the existing bpf_sock_ops_{load,store}_hdr_opt() helpers to ensure these helpers can only be used by the BPF_SOCK_OPS_PARSE_HDR_OPT_CB, BPF_SOCK_OPS_HDR_OPT_LEN_CB, and BPF_SOCK_OPS_WRITE_HDR_OPT_CB callback.

Forgive me. I cannot see how the bpf_sock_ops_load_hdr_opt helper has something to do with the current thread? Could you enlighten me?

Quoted 2 lines

btw, how is the ack_skb used for the SCM_TSTAMP_ACK by the user space now?

To be honest, I hardly use the ack_skb[1] under this circumstance... I think if someone offers a suggestion to use it, then we can support it?

[1]
commit e7ed11ee945438b737e2ae2370e35591e16ec371

Author: Yousuk Seung <[email protected]>
Date:   Wed Jan 20 12:41:55 2021 -0800

tcp: add TTL to SCM_TIMESTAMPING_OPT_STATS

This patch adds TCP_NLA_TTL to SCM_TIMESTAMPING_OPT_STATS that exports the time-to-live or hop limit of the latest incoming packet with SCM_TSTAMP_ACK. The value exported may not be from the packet that acks the sequence when incoming packets are aggregated. Exporting the time-to-live or hop limit value of incoming packets helps to estimate the hop count of the path of the flow that may change over time.

#35 lore raw

Re: [PATCH net-next v4 10/11] net-timestamp: export the tskey for TCP bpf extension

Quoted 20 lines · Jason Xing
Quoted 12 lines

net/core/skbuff.c static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, · line 5573

Quoted 7 lines
net/core/skbuff.c +2 -1
@@ -5569,7 +5569,10 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb,
               return;
       }
 
-     bpf_skops_tx_timestamping(sk, skb, op, 2, args);
+     if (sk_is_tcp(sk))
+             args[2] = skb_shinfo(skb)->tskey;

Instead of only passing one info "skb_shinfo(skb)->tskey" of a skb, pass the whole skb ptr to the bpf prog. Take a look at bpf_skops_init_skb. Lets start with end_offset = 0 for now so that the bpf prog won't use it to read the skb->data. It can be revisited later.

Quoted 4 lines
         bpf_skops_init_skb(&sock_ops, skb, 0);

The bpf prog can use bpf_cast_to_kern_ctx() and bpf_core_cast() to get to the skb_shinfo(skb). Take a look at the md_skb example in type_cast.c.

Sorry, I didn't give it much thought on getting to the shinfo. That's why I quickly gave up using bpf_skops_init_skb() after I noticed the seq of skb is always zero 🙁

Quoted 8 lines

I will test it tomorrow. Thanks.

Quoted 4 lines

Then it needs to add a bpf_sock->op check to the existing bpf_sock_ops_{load,store}_hdr_opt() helpers to ensure these helpers can only be used by the BPF_SOCK_OPS_PARSE_HDR_OPT_CB, BPF_SOCK_OPS_HDR_OPT_LEN_CB, and BPF_SOCK_OPS_WRITE_HDR_OPT_CB callback.

Forgive me. I cannot see how the bpf_sock_ops_load_hdr_opt helper has something to do with the current thread? Could you enlighten me?

Sure. This is the same discussion as in patch 2, so may be worth to highlight something that I guess may be missing:

a bpf prog does not need to use a helper does not mean:
a bpf prog is not allowed to call a helper because it is not safe.

The sockops prog running at the new timestamp hook does not need to call bpf_setsockopt() but it does not mean the bpf prog is not allowed to call bpf_setsockopt() without holding the sk_lock which is then broken.

The sockops timestamp prog does not need to use the bpf_sock_ops_{load,store}_hdr_opt but it does not mean the bpf prog is not allowed to call bpf_sock_ops_{load,store}_hdr_opt to change the skb which is then also broken.

Now, skops->skb is not NULL only when the sockops prog is allowed to read/write the skb.

With bpf_skops_init_skb(), skops->skb will not be NULL in the new timestamp callback hook. bpf_sock_ops_{load,store}_hdr_opt() will be able to use the skops->skb and it will be broken.

Quoted 5 lines
Quoted 2 lines

btw, how is the ack_skb used for the SCM_TSTAMP_ACK by the user space now?

To be honest, I hardly use the ack_skb[1] under this circumstance... I think if someone offers a suggestion to use it, then we can support it?

Thanks for the pointer.

Yep, supporting it later is fine. I am curious because the ack_skb is used in the user space time stamping now but not in your patch. I was asking to ensure that we should be able to support it in the future if there is a need. We should be able to reuse the skops->syn_skb to support that in the future.

Quoted 14 lines

[1]
commit e7ed11ee945438b737e2ae2370e35591e16ec371

Author: Yousuk Seung<[email protected]>
Date:   Wed Jan 20 12:41:55 2021 -0800

tcp: add TTL to SCM_TIMESTAMPING_OPT_STATS

This patch adds TCP_NLA_TTL to SCM_TIMESTAMPING_OPT_STATS that exports the time-to-live or hop limit of the latest incoming packet with SCM_TSTAMP_ACK. The value exported may not be from the packet that acks the sequence when incoming packets are aggregated. Exporting the time-to-live or hop limit value of incoming packets helps to estimate the hop count of the path of the flow that may change over time.

author
#36 lore raw

Re: [PATCH net-next v4 10/11] net-timestamp: export the tskey for TCP bpf extension

Quoted 37 lines · Martin KaFai Lau
Quoted 20 lines · Jason Xing
Quoted 12 lines

net/core/skbuff.c static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, · line 5573

Quoted 7 lines
net/core/skbuff.c +2 -1
@@ -5569,7 +5569,10 @@ static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb,
               return;
       }
 
-     bpf_skops_tx_timestamping(sk, skb, op, 2, args);
+     if (sk_is_tcp(sk))
+             args[2] = skb_shinfo(skb)->tskey;

Instead of only passing one info "skb_shinfo(skb)->tskey" of a skb, pass the whole skb ptr to the bpf prog. Take a look at bpf_skops_init_skb. Lets start with end_offset = 0 for now so that the bpf prog won't use it to read the skb->data. It can be revisited later.

Quoted 4 lines
         bpf_skops_init_skb(&sock_ops, skb, 0);

The bpf prog can use bpf_cast_to_kern_ctx() and bpf_core_cast() to get to the skb_shinfo(skb). Take a look at the md_skb example in type_cast.c.

Sorry, I didn't give it much thought on getting to the shinfo. That's why I quickly gave up using bpf_skops_init_skb() after I noticed the seq of skb is always zero 🙁

Quoted 8 lines

I will test it tomorrow. Thanks.

Quoted 4 lines

Then it needs to add a bpf_sock->op check to the existing bpf_sock_ops_{load,store}_hdr_opt() helpers to ensure these helpers can only be used by the BPF_SOCK_OPS_PARSE_HDR_OPT_CB, BPF_SOCK_OPS_HDR_OPT_LEN_CB, and BPF_SOCK_OPS_WRITE_HDR_OPT_CB callback.

Forgive me. I cannot see how the bpf_sock_ops_load_hdr_opt helper has something to do with the current thread? Could you enlighten me?

Sure. This is the same discussion as in patch 2, so may be worth to highlight something that I guess may be missing:

a bpf prog does not need to use a helper does not mean:
a bpf prog is not allowed to call a helper because it is not safe.

Quoted 8 lines

The sockops prog running at the new timestamp hook does not need to call bpf_setsockopt() but it does not mean the bpf prog is not allowed to call bpf_setsockopt() without holding the sk_lock which is then broken.

The sockops timestamp prog does not need to use the bpf_sock_ops_{load,store}_hdr_opt but it does not mean the bpf prog is not allowed to call bpf_sock_ops_{load,store}_hdr_opt to change the skb which is then also broken.

Ah, I see. Thanks for your explanation :)

Quoted 7 lines

Now, skops->skb is not NULL only when the sockops prog is allowed to read/write the skb.

With bpf_skops_init_skb(), skops->skb will not be NULL in the new timestamp callback hook. bpf_sock_ops_{load,store}_hdr_opt() will be able to use the skops->skb and it will be broken.

I will take care of it along the way.

Quoted 7 lines
Quoted 6 lines
Quoted 3 lines

btw, how is the ack_skb used for the SCM_TSTAMP_ACK by the user space now?

To be honest, I hardly use the ack_skb[1] under this circumstance... I think if someone offers a suggestion to use it, then we can support it?

Quoted 6 lines

Thanks for the pointer.

Yep, supporting it later is fine. I am curious because the ack_skb is used in the user space time stamping now but not in your patch. I was asking to ensure that we should be able to support it in the future if there is a need. We should be able to reuse the skops->syn_skb to support that in the future.

Agreed. I feel that I can handle this part after this series.

Quoted 17 lines
Quoted 15 lines

[1]
commit e7ed11ee945438b737e2ae2370e35591e16ec371

Author: Yousuk Seung<[email protected]>
Date:   Wed Jan 20 12:41:55 2021 -0800

tcp: add TTL to SCM_TIMESTAMPING_OPT_STATS

This patch adds TCP_NLA_TTL to SCM_TIMESTAMPING_OPT_STATS that exports the time-to-live or hop limit of the latest incoming packet with SCM_TSTAMP_ACK. The value exported may not be from the packet that acks the sequence when incoming packets are aggregated. Exporting the time-to-live or hop limit value of incoming packets helps to estimate the hop count of the path of the flow that may change over time.

author
#37 lore raw

Re: [PATCH net-next v4 10/11] net-timestamp: export the tskey for TCP bpf extension

In reply to Martin KaFai Lau

Hi Martin,

Quoted 9 lines

net/core/skbuff.c static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, · line 5573

Quoted 3 lines
net/core/skbuff.c +2 -1
-     bpf_skops_tx_timestamping(sk, skb, op, 2, args);
+     if (sk_is_tcp(sk))
+             args[2] = skb_shinfo(skb)->tskey;

Instead of only passing one info "skb_shinfo(skb)->tskey" of a skb, pass the whole skb ptr to the bpf prog. Take a look at bpf_skops_init_skb. Lets start with end_offset = 0 for now so that the bpf prog won't use it to read the skb->data. It can be revisited later.

Quoted 4 lines
        bpf_skops_init_skb(&sock_ops, skb, 0);

The bpf prog can use bpf_cast_to_kern_ctx() and bpf_core_cast() to get to the skb_shinfo(skb). Take a look at the md_skb example in type_cast.c.

In recent days, I've been working on this part. It turns out to be infeasible to pass "struct __sk_buff *skb" as the second parameter in skops_sockopt() in patch [11/11]. I cannot find a way to acquire the skb itself, sorry for that :(

IIUC, there are three approaches to fetch the tskey:
1. Like what I wrote in this patchset, passing the tskey to bpf prog through calling __cgroup_bpf_run_filter_sock_ops() is simple and enough.
2. Considering future usability, I feel I can add skb_head, skb_end fields in sock_ops_convert_ctx_access().
3. Only adding a new field tskey like skb_hwtstamp in sock_ops_convert_ctx_access()

If there is something wrong, please correct me. Thanks!

patch[11/11]: https://lore.kernel.org/all/[email protected]/

author
#38 lore raw

Re: [PATCH net-next v4 10/11] net-timestamp: export the tskey for TCP bpf extension

Quoted 22 lines · Jason Xing

Hi Martin,

Quoted 9 lines

net/core/skbuff.c static void __skb_tstamp_tx_bpf(struct sock *sk, struct sk_buff *skb, · line 5573

Quoted 3 lines
net/core/skbuff.c +2 -1
-     bpf_skops_tx_timestamping(sk, skb, op, 2, args);
+     if (sk_is_tcp(sk))
+             args[2] = skb_shinfo(skb)->tskey;

Instead of only passing one info "skb_shinfo(skb)->tskey" of a skb, pass the whole skb ptr to the bpf prog. Take a look at bpf_skops_init_skb. Lets start with end_offset = 0 for now so that the bpf prog won't use it to read the skb->data. It can be revisited later.

Quoted 4 lines
        bpf_skops_init_skb(&sock_ops, skb, 0);

The bpf prog can use bpf_cast_to_kern_ctx() and bpf_core_cast() to get to the skb_shinfo(skb). Take a look at the md_skb example in type_cast.c.

In recent days, I've been working on this part. It turns out to be infeasible to pass "struct __sk_buff *skb" as the second parameter in skops_sockopt() in patch [11/11]. I cannot find a way to acquire the skb itself, sorry for that :(

Quoted 8 lines

IIUC, there are three approaches to fetch the tskey:
1. Like what I wrote in this patchset, passing the tskey to bpf prog through calling __cgroup_bpf_run_filter_sock_ops() is simple and enough.
2. Considering future usability, I feel I can add skb_head, skb_end fields in sock_ops_convert_ctx_access().
3. Only adding a new field tskey like skb_hwtstamp in sock_ops_convert_ctx_access()

After considering those approaches over and over again, I think this #3 is more suitable [1]. It can be aligned with other usages, say, skb_hwtstamp. Normally, only temporary variables are passed through calling __cgroup_bpf_run_filter_sock_ops(). Then we don't need to worry about breakages on skb because of safety issues. Well, how about this draft as below?

[1] diff patch
+ case offsetof(struct bpf_sock_ops, tskey): {
+ struct bpf_insn *jmp_on_null_skb;
+
+ *insn++ = BPF_LDX_MEM(BPF_FIELD_SIZEOF(struct bpf_sock_ops_kern,
+ skb),
+ si->dst_reg, si->src_reg,
+ offsetof(struct bpf_sock_ops_kern,
+ skb));

+               /* Reserve one insn to test skb == NULL */
+               jmp_on_null_skb = insn++;
+               insn = bpf_convert_shinfo_access(si->dst_reg,

si->dst_reg, insn);
+ *insn++ = BPF_LDX_MEM(BPF_DW, si->dst_reg, si->dst_reg,
+ bpf_target_off(struct skb_shared_info,
+ tskey, 4,
+ target_size));
+ *jmp_on_null_skb = BPF_JMP_IMM(BPF_JEQ, si->dst_reg, 0,
+ insn - jmp_on_null_skb - 1);
+ break;
+ }

#39 lore raw

Re: [PATCH net-next v4 10/11] net-timestamp: export the tskey for TCP bpf extension

In reply to Jason Xing
Quoted 13 lines · Jason Xing

Hi Martin,

Quoted 11 lines

Review

Quoted 3 lines
(quoted diff) +2 -1
-     bpf_skops_tx_timestamping(sk, skb, op, 2, args);
+     if (sk_is_tcp(sk))
+             args[2] = skb_shinfo(skb)->tskey;

Instead of only passing one info "skb_shinfo(skb)->tskey" of a skb, pass the whole skb ptr to the bpf prog. Take a look at bpf_skops_init_skb. Lets start with end_offset = 0 for now so that the bpf prog won't use it to read the skb->data. It can be revisited later.

         bpf_skops_init_skb(&sock_ops, skb, 0);
Quoted 7 lines
Quoted 2 lines

The bpf prog can use bpf_cast_to_kern_ctx() and bpf_core_cast() to get to the skb_shinfo(skb). Take a look at the md_skb example in type_cast.c.

In recent days, I've been working on this part. It turns out to be infeasible to pass "struct __sk_buff *skb" as the second parameter in skops_sockopt() in patch [11/11]. I cannot find a way to acquire the skb itself

I didn't mean to pass skb in sock_ops_kern->args[] or pass skb to the bpf prog "SEC("sockops") skops_sockopt(struct bpf_sock_ops *skops, struct sk_buff *skb)". The bpf prog can only take one ctx argument which is
"struct bpf_sock_ops *skops" here.

I meant to have kernel initializing the sock_ops_kern->skb by doing "bpf_skops_init_skb(&sock_ops, skb, 0);" before running the bpf prog.

The bpf prog can read the skb by using bpf_cast_to_kern_ctx() and bpf_core_cast().

Something like the following. I directly change the existing test_tcp_hdr_options.c. It has not been changed to use the vmlinux.h, so I need to redefine some parts of the sk_buff, skb_shared_info, and bpf_sock_ops_kern. Your new test should directly include <vmlinux.h> and no need to redefine them.

Untested code:

tools/testing/selftests/bpf/progs/test_tcp_hdr_options.c +56 -0
index 5f4e87ee949a..c98ebe71f6ba 100644
@@ -12,8 +12,10 @@
 #include <linux/types.h>
 #include <bpf/bpf_helpers.h>
 #include <bpf/bpf_endian.h>
+#include <bpf/bpf_core_read.h>
 #define BPF_PROG_TEST_TCP_HDR_OPTIONS
 #include "test_tcp_hdr_options.h"
+#include "bpf_kfuncs.h"
 
 #ifndef sizeof_field
 #define sizeof_field(TYPE, MEMBER) sizeof((((TYPE *)0)->MEMBER))
@@ -348,9 +350,63 @@ static int current_mss_opt_len(struct bpf_sock_ops *skops)
 	return CG_OK;
 }
 
+struct sk_buff {
+	unsigned int		end;
+	unsigned char		*head;
+} __attribute__((preserve_access_index));
+
+struct skb_shared_info {
+	__u8		flags;
+	__u8		meta_len;
+	__u8		nr_frags;
+	__u8		tx_flags;
+	unsigned short	gso_size;
+	unsigned short	gso_segs;
+	unsigned int	gso_type;
+	__u32		tskey;
+} __attribute__((preserve_access_index));
+
+struct bpf_sock_ops_kern {
+	struct	sock *sk;
+	union {
+		__u32 args[4];
+		__u32 reply;
+		__u32 replylong[4];
+	};
+	struct sk_buff	*syn_skb;
+	struct sk_buff	*skb;
+	void	*skb_data_end;
+	__u8	op;
+	__u8	is_fullsock;
+	__u8	remaining_opt_len;
+	__u64	temp;			/* temp and everything after is not
+					 * initialized to 0 before calling
+					 * the BPF program. New fields that
+					 * should be initialized to 0 should
+					 * be inserted before temp.
+					 * temp is scratch storage used by
+					 * sock_ops_convert_ctx_access
+					 * as temporary storage of a register.
+					 */
+} __attribute__((preserve_access_index));
+
 static int handle_hdr_opt_len(struct bpf_sock_ops *skops)
 {
 	__u8 tcp_flags = skops_tcp_flags(skops);
+	struct bpf_sock_ops_kern *skops_kern;
+	struct skb_shared_info *shared_info;
+	struct sk_buff *skb;
+
+	skops_kern = bpf_cast_to_kern_ctx(skops);
+	skb = skops_kern->skb;
+
+	if (skb) {
+		shared_info = bpf_core_cast(skb->head + skb->end, struct skb_shared_info);
+		/* printk as an example. don't do that in selftests. */
+		bpf_printk("tskey %u gso_size %u gso_segs %u gso_type %u flags %x\n",
+			   shared_info->tskey, shared_info->gso_size,
+			   shared_info->gso_segs, shared_info->gso_type, shared_info->flags);
+	}
 
 	if ((tcp_flags & TCPHDR_SYNACK) == TCPHDR_SYNACK)
 		return synack_opt_len(skops);
author
#40 lore raw

Re: [PATCH net-next v4 10/11] net-timestamp: export the tskey for TCP bpf extension

Quoted 97 lines · Martin KaFai Lau
Quoted 13 lines · Jason Xing

Hi Martin,

Quoted 11 lines

Review

Quoted 3 lines
(quoted diff) +2 -1
-     bpf_skops_tx_timestamping(sk, skb, op, 2, args);
+     if (sk_is_tcp(sk))
+             args[2] = skb_shinfo(skb)->tskey;

Instead of only passing one info "skb_shinfo(skb)->tskey" of a skb, pass the whole skb ptr to the bpf prog. Take a look at bpf_skops_init_skb. Lets start with end_offset = 0 for now so that the bpf prog won't use it to read the skb->data. It can be revisited later.

         bpf_skops_init_skb(&sock_ops, skb, 0);
Quoted 7 lines
Quoted 2 lines

The bpf prog can use bpf_cast_to_kern_ctx() and bpf_core_cast() to get to the skb_shinfo(skb). Take a look at the md_skb example in type_cast.c.

In recent days, I've been working on this part. It turns out to be infeasible to pass "struct __sk_buff *skb" as the second parameter in skops_sockopt() in patch [11/11]. I cannot find a way to acquire the skb itself

I didn't mean to pass skb in sock_ops_kern->args[] or pass skb to the bpf prog "SEC("sockops") skops_sockopt(struct bpf_sock_ops *skops, struct sk_buff *skb)". The bpf prog can only take one ctx argument which is
"struct bpf_sock_ops *skops" here.

I meant to have kernel initializing the sock_ops_kern->skb by doing "bpf_skops_init_skb(&sock_ops, skb, 0);" before running the bpf prog.

The bpf prog can read the skb by using bpf_cast_to_kern_ctx() and bpf_core_cast().

Something like the following. I directly change the existing test_tcp_hdr_options.c. It has not been changed to use the vmlinux.h, so I need to redefine some parts of the sk_buff, skb_shared_info, and bpf_sock_ops_kern. Your new test should directly include <vmlinux.h> and no need to redefine them.

Untested code:

tools/testing/selftests/bpf/progs/test_tcp_hdr_options.c +40 -0
index 5f4e87ee949a..c98ebe71f6ba 100644
@@ -12,8 +12,10 @@
  #include <linux/types.h>
  #include <bpf/bpf_helpers.h>
  #include <bpf/bpf_endian.h>
+#include <bpf/bpf_core_read.h>
  #define BPF_PROG_TEST_TCP_HDR_OPTIONS
  #include "test_tcp_hdr_options.h"
+#include "bpf_kfuncs.h"
 
  #ifndef sizeof_field
  #define sizeof_field(TYPE, MEMBER) sizeof((((TYPE *)0)->MEMBER))
@@ -348,9 +350,63 @@ static int current_mss_opt_len(struct bpf_sock_ops *skops)
        return CG_OK;
  }
 
+struct sk_buff {
+       unsigned int            end;
+       unsigned char           *head;
+} __attribute__((preserve_access_index));
+
+struct skb_shared_info {
+       __u8            flags;
+       __u8            meta_len;
+       __u8            nr_frags;
+       __u8            tx_flags;
+       unsigned short  gso_size;
+       unsigned short  gso_segs;
+       unsigned int    gso_type;
+       __u32           tskey;
+} __attribute__((preserve_access_index));
+
+struct bpf_sock_ops_kern {
+       struct  sock *sk;
+       union {
+               __u32 args[4];
+               __u32 reply;
+               __u32 replylong[4];
+       };
+       struct sk_buff  *syn_skb;
+       struct sk_buff  *skb;
+       void    *skb_data_end;
+       __u8    op;
+       __u8    is_fullsock;
+       __u8    remaining_opt_len;
+       __u64   temp;                   /* temp and everything after is not
+                                        * initialized to 0 before calling
+                                        * the BPF program. New fields that
+                                        * should be initialized to 0 should
+                                        * be inserted before temp.
+                                        * temp is scratch storage used by
+                                        * sock_ops_convert_ctx_access
+                                        * as temporary storage of a register.
+                                        */

tools/testing/selftests/bpf/progs/test_tcp_hdr_options.c static int current_mss_opt_len(struct bpf_sock_ops *skops) · line 400

Quoted 10 lines
tools/testing/selftests/bpf/progs/test_tcp_hdr_options.c +7 -0
+} __attribute__((preserve_access_index));
+
  static int handle_hdr_opt_len(struct bpf_sock_ops *skops)
  {
        __u8 tcp_flags = skops_tcp_flags(skops);
+       struct bpf_sock_ops_kern *skops_kern;
+       struct skb_shared_info *shared_info;
+       struct sk_buff *skb;
+
+       skops_kern = bpf_cast_to_kern_ctx(skops);

Oh, I misunderstood the use of bpf_cast_to_kern_ctx() function and failed/struggled to fetch the "struct bpf_sock_ops_kern".

Now I realized. Thanks so much for your detailed codes! I will try this in a few hours.

Quoted 14 lines
tools/testing/selftests/bpf/progs/test_tcp_hdr_options.c +9 -0
+       skb = skops_kern->skb;
+
+       if (skb) {
+               shared_info = bpf_core_cast(skb->head + skb->end, struct skb_shared_info);
+               /* printk as an example. don't do that in selftests. */
+               bpf_printk("tskey %u gso_size %u gso_segs %u gso_type %u flags %x\n",
+                          shared_info->tskey, shared_info->gso_size,
+                          shared_info->gso_segs, shared_info->gso_type, shared_info->flags);
+       }
 
        if ((tcp_flags & TCPHDR_SYNACK) == TCPHDR_SYNACK)
                return synack_opt_len(skops);
author
#41 lore raw

PATCH v4 11/11 bpf: add simple bpf tests in the tx path for so_timstamping feature

In reply to Jason Xing

From: Jason Xing <[email protected]>

Only check if we pass those three key points after we enable the bpf extension for so_timestamping. During each point, we can choose whether to print the current timestamp.

---
 .../bpf/prog_tests/so_timestamping.c          |  97 +++++++++++++
 .../selftests/bpf/progs/so_timestamping.c     | 135 ++++++++++++++++++
 2 files changed, 232 insertions(+)
 create mode 100644 tools/testing/selftests/bpf/prog_tests/so_timestamping.c
 create mode 100644 tools/testing/selftests/bpf/progs/so_timestamping.c
tools/testing/selftests/bpf/prog_tests/so_timestamping.c new file +97 -0
new file mode 100644
index 000000000000..c5978444f9c8
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Tencent */
+
+#define _GNU_SOURCE
+#include <sched.h>
+#include <linux/socket.h>
+#include <linux/tls.h>
+#include <net/if.h>
+
+#include "test_progs.h"
+#include "cgroup_helpers.h"
+#include "network_helpers.h"
+
+#include "so_timestamping.skel.h"
+
+#define CG_NAME "/so-timestamping-test"
+
+static const char addr4_str[] = "127.0.0.1";
+static const char addr6_str[] = "::1";
+static struct so_timestamping *skel;
+static int cg_fd;
+
+static int create_netns(void)
+{
+	if (!ASSERT_OK(unshare(CLONE_NEWNET), "create netns"))
+		return -1;
+
+	if (!ASSERT_OK(system("ip link set dev lo up"), "set lo up"))
+		return -1;
+
+	return 0;
+}
+
+static void test_tcp(int family)
+{
+	struct so_timestamping__bss *bss = skel->bss;
+	char buf[] = "testing testing";
+	int sfd = -1, cfd = -1;
+	int n;
+
+	memset(bss, 0, sizeof(*bss));
+
+	sfd = start_server(family, SOCK_STREAM,
+			   family == AF_INET6 ? addr6_str : addr4_str, 0, 0);
+	if (!ASSERT_GE(sfd, 0, "start_server"))
+		goto out;
+
+	cfd = connect_to_fd(sfd, 0);
+	if (!ASSERT_GE(cfd, 0, "connect_to_fd_server")) {
+		close(sfd);
+		goto out;
+	}
+
+	n = write(cfd, buf, sizeof(buf));
+	if (!ASSERT_EQ(n, sizeof(buf), "send to server"))
+		goto out;
+
+	ASSERT_EQ(bss->nr_active, 1, "nr_active");
+	ASSERT_EQ(bss->nr_sched, 1, "nr_sched");
+	ASSERT_EQ(bss->nr_txsw, 1, "nr_txsw");
+	ASSERT_EQ(bss->nr_ack, 1, "nr_ack");
+
+out:
+	if (sfd >= 0)
+		close(sfd);
+	if (cfd >= 0)
+		close(cfd);
+}
+
+void test_so_timestamping(void)
+{
+	cg_fd = test__join_cgroup(CG_NAME);
+	if (cg_fd < 0)
+		return;
+
+	if (create_netns())
+		goto done;
+
+	skel = so_timestamping__open();
+	if (!ASSERT_OK_PTR(skel, "open skel"))
+		goto done;
+
+	if (!ASSERT_OK(so_timestamping__load(skel), "load skel"))
+		goto done;
+
+	skel->links.skops_sockopt =
+		bpf_program__attach_cgroup(skel->progs.skops_sockopt, cg_fd);
+	if (!ASSERT_OK_PTR(skel->links.skops_sockopt, "attach cgroup"))
+		goto done;
+
+	test_tcp(AF_INET6);
+	test_tcp(AF_INET);
+
+done:
+	so_timestamping__destroy(skel);
+	close(cg_fd);
+}
tools/testing/selftests/bpf/progs/so_timestamping.c new file +135 -0

135 lines not on this page · raw message

Signature · 1 line
2.37.3
#42 lore raw

Re: [PATCH net-next v4 11/11] bpf: add simple bpf tests in the tx path for so_timstamping feature

Quoted 1 line · Jason Xing

From: Jason Xing <[email protected]>

in subject: s/so_timstamping/so_timestamping

Quoted 208 lines

Only check if we pass those three key points after we enable the bpf extension for so_timestamping. During each point, we can choose whether to print the current timestamp.

---
 .../bpf/prog_tests/so_timestamping.c          |  97 +++++++++++++
 .../selftests/bpf/progs/so_timestamping.c     | 135 ++++++++++++++++++
 2 files changed, 232 insertions(+)
 create mode 100644 tools/testing/selftests/bpf/prog_tests/so_timestamping.c
 create mode 100644 tools/testing/selftests/bpf/progs/so_timestamping.c
tools/testing/selftests/bpf/prog_tests/so_timestamping.c new file +97 -0
new file mode 100644
index 000000000000..c5978444f9c8
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Tencent */
+
+#define _GNU_SOURCE
+#include <sched.h>
+#include <linux/socket.h>
+#include <linux/tls.h>
+#include <net/if.h>
+
+#include "test_progs.h"
+#include "cgroup_helpers.h"
+#include "network_helpers.h"
+
+#include "so_timestamping.skel.h"
+
+#define CG_NAME "/so-timestamping-test"
+
+static const char addr4_str[] = "127.0.0.1";
+static const char addr6_str[] = "::1";
+static struct so_timestamping *skel;
+static int cg_fd;
+
+static int create_netns(void)
+{
+	if (!ASSERT_OK(unshare(CLONE_NEWNET), "create netns"))
+		return -1;
+
+	if (!ASSERT_OK(system("ip link set dev lo up"), "set lo up"))
+		return -1;
+
+	return 0;
+}
+
+static void test_tcp(int family)
+{
+	struct so_timestamping__bss *bss = skel->bss;
+	char buf[] = "testing testing";
+	int sfd = -1, cfd = -1;
+	int n;
+
+	memset(bss, 0, sizeof(*bss));
+
+	sfd = start_server(family, SOCK_STREAM,
+			   family == AF_INET6 ? addr6_str : addr4_str, 0, 0);
+	if (!ASSERT_GE(sfd, 0, "start_server"))
+		goto out;
+
+	cfd = connect_to_fd(sfd, 0);
+	if (!ASSERT_GE(cfd, 0, "connect_to_fd_server")) {
+		close(sfd);
+		goto out;
+	}
+
+	n = write(cfd, buf, sizeof(buf));
+	if (!ASSERT_EQ(n, sizeof(buf), "send to server"))
+		goto out;
+
+	ASSERT_EQ(bss->nr_active, 1, "nr_active");
+	ASSERT_EQ(bss->nr_sched, 1, "nr_sched");
+	ASSERT_EQ(bss->nr_txsw, 1, "nr_txsw");
+	ASSERT_EQ(bss->nr_ack, 1, "nr_ack");
+
+out:
+	if (sfd >= 0)
+		close(sfd);
+	if (cfd >= 0)
+		close(cfd);
+}
+
+void test_so_timestamping(void)
+{
+	cg_fd = test__join_cgroup(CG_NAME);
+	if (cg_fd < 0)
+		return;
+
+	if (create_netns())
+		goto done;
+
+	skel = so_timestamping__open();
+	if (!ASSERT_OK_PTR(skel, "open skel"))
+		goto done;
+
+	if (!ASSERT_OK(so_timestamping__load(skel), "load skel"))
+		goto done;
+
+	skel->links.skops_sockopt =
+		bpf_program__attach_cgroup(skel->progs.skops_sockopt, cg_fd);
+	if (!ASSERT_OK_PTR(skel->links.skops_sockopt, "attach cgroup"))
+		goto done;
+
+	test_tcp(AF_INET6);
+	test_tcp(AF_INET);
+
+done:
+	so_timestamping__destroy(skel);
+	close(cg_fd);
+}
tools/testing/selftests/bpf/progs/so_timestamping.c new file +87 -0
new file mode 100644
index 000000000000..f64e94dbd70e
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Tencent */
+
+#include "vmlinux.h"
+#include "bpf_tracing_net.h"
+#include <bpf/bpf_core_read.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+#include "bpf_misc.h"
+
+#define SK_BPF_CB_FLAGS 1009
+#define SK_BPF_CB_TX_TIMESTAMPING 1
+
+int nr_active;
+int nr_passive;
+int nr_sched;
+int nr_txsw;
+int nr_ack;
+
+struct sockopt_test {
+	int opt;
+	int new;
+};
+
+static const struct sockopt_test sol_socket_tests[] = {
+	{ .opt = SK_BPF_CB_FLAGS, .new = SK_BPF_CB_TX_TIMESTAMPING, },
+	{ .opt = 0, },
+};
+
+struct loop_ctx {
+	void *ctx;
+	struct sock *sk;
+};
+
+struct {
+	__uint(type, BPF_MAP_TYPE_HASH);
+	__type(key, u32);
+	__type(value, u64);
+	__uint(max_entries, 1024);
+} hash_map SEC(".maps");
+
+static u64 delay_tolerance_nsec = 5000000;
+
+static int bpf_test_sockopt_int(void *ctx, struct sock *sk,
+				const struct sockopt_test *t,
+				int level)
+{
+	int new, opt;
+
+	opt = t->opt;
+	new = t->new;
+
+	if (bpf_setsockopt(ctx, level, opt, &new, sizeof(new)))
+		return 1;
+
+	return 0;
+}
+
+static int bpf_test_socket_sockopt(__u32 i, struct loop_ctx *lc)
+{
+	const struct sockopt_test *t;
+
+	if (i >= ARRAY_SIZE(sol_socket_tests))
+		return 1;
+
+	t = &sol_socket_tests[i];
+	if (!t->opt)
+		return 1;
+
+	return bpf_test_sockopt_int(lc->ctx, lc->sk, t, SOL_SOCKET);
+}
+
+static int bpf_test_sockopt(void *ctx, struct sock *sk)
+{
+	struct loop_ctx lc = { .ctx = ctx, .sk = sk, };
+	int n;
+
+	n = bpf_loop(ARRAY_SIZE(sol_socket_tests), bpf_test_socket_sockopt, &lc, 0);
+	if (n != ARRAY_SIZE(sol_socket_tests))
+		return -1;
+
+	return 0;
+}
+
+static bool bpf_test_delay(struct bpf_sock_ops *skops)
+{
+	u64 timestamp = bpf_ktime_get_ns();

tools/testing/selftests/bpf/progs/so_timestamping.c line 97

Quoted 10 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +10 -0
+	u32 seq = skops->args[2];
+	u64 *value;
+
+	value = bpf_map_lookup_elem(&hash_map, &seq);
+	if (value && (timestamp - *value > delay_tolerance_nsec)) {
+		bpf_printk("time delay: %lu", timestamp - *value);
+		return false;
+	}
+
+	bpf_map_update_elem(&hash_map, &seq, &timestamp, BPF_ANY);

Maybe enforce that you expect value to be found for all cases except the first (SCHED). I.e., that they share the same seq/tskey.

Quoted 41 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +38 -0
+	return true;
+}
+
+SEC("sockops")
+int skops_sockopt(struct bpf_sock_ops *skops)
+{
+	struct bpf_sock *bpf_sk = skops->sk;
+	struct sock *sk;
+
+	if (!bpf_sk)
+		return 1;
+
+	sk = (struct sock *)bpf_skc_to_tcp_sock(bpf_sk);
+	if (!sk)
+		return 1;
+
+	switch (skops->op) {
+	case BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB:
+		nr_active += !bpf_test_sockopt(skops, sk);
+		break;
+	case BPF_SOCK_OPS_TS_SCHED_OPT_CB:
+		if (bpf_test_delay(skops))
+			nr_sched += 1;
+		break;
+	case BPF_SOCK_OPS_TS_SW_OPT_CB:
+		if (bpf_test_delay(skops))
+			nr_txsw += 1;
+		break;
+	case BPF_SOCK_OPS_TS_ACK_OPT_CB:
+		if (bpf_test_delay(skops))
+			nr_ack += 1;
+		break;
+	}
+
+	return 1;
+}
+
+char _license[] SEC("license") = "GPL";
Signature · 1 line
2.37.3
author
#43 lore raw

Re: [PATCH net-next v4 11/11] bpf: add simple bpf tests in the tx path for so_timstamping feature

Quoted 5 lines · Willem de Bruijn
Quoted 1 line · Jason Xing

From: Jason Xing <[email protected]>

in subject: s/so_timstamping/so_timestamping

Will fix it soon.

Quoted 214 lines
Quoted 214 lines

Only check if we pass those three key points after we enable the bpf extension for so_timestamping. During each point, we can choose whether to print the current timestamp.

---
 .../bpf/prog_tests/so_timestamping.c          |  97 +++++++++++++
 .../selftests/bpf/progs/so_timestamping.c     | 135 ++++++++++++++++++
 2 files changed, 232 insertions(+)
 create mode 100644 tools/testing/selftests/bpf/prog_tests/so_timestamping.c
 create mode 100644 tools/testing/selftests/bpf/progs/so_timestamping.c
tools/testing/selftests/bpf/prog_tests/so_timestamping.c new file +97 -0
new file mode 100644
index 000000000000..c5978444f9c8
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Tencent */
+
+#define _GNU_SOURCE
+#include <sched.h>
+#include <linux/socket.h>
+#include <linux/tls.h>
+#include <net/if.h>
+
+#include "test_progs.h"
+#include "cgroup_helpers.h"
+#include "network_helpers.h"
+
+#include "so_timestamping.skel.h"
+
+#define CG_NAME "/so-timestamping-test"
+
+static const char addr4_str[] = "127.0.0.1";
+static const char addr6_str[] = "::1";
+static struct so_timestamping *skel;
+static int cg_fd;
+
+static int create_netns(void)
+{
+     if (!ASSERT_OK(unshare(CLONE_NEWNET), "create netns"))
+             return -1;
+
+     if (!ASSERT_OK(system("ip link set dev lo up"), "set lo up"))
+             return -1;
+
+     return 0;
+}
+
+static void test_tcp(int family)
+{
+     struct so_timestamping__bss *bss = skel->bss;
+     char buf[] = "testing testing";
+     int sfd = -1, cfd = -1;
+     int n;
+
+     memset(bss, 0, sizeof(*bss));
+
+     sfd = start_server(family, SOCK_STREAM,
+                        family == AF_INET6 ? addr6_str : addr4_str, 0, 0);
+     if (!ASSERT_GE(sfd, 0, "start_server"))
+             goto out;
+
+     cfd = connect_to_fd(sfd, 0);
+     if (!ASSERT_GE(cfd, 0, "connect_to_fd_server")) {
+             close(sfd);
+             goto out;
+     }
+
+     n = write(cfd, buf, sizeof(buf));
+     if (!ASSERT_EQ(n, sizeof(buf), "send to server"))
+             goto out;
+
+     ASSERT_EQ(bss->nr_active, 1, "nr_active");
+     ASSERT_EQ(bss->nr_sched, 1, "nr_sched");
+     ASSERT_EQ(bss->nr_txsw, 1, "nr_txsw");
+     ASSERT_EQ(bss->nr_ack, 1, "nr_ack");
+
+out:
+     if (sfd >= 0)
+             close(sfd);
+     if (cfd >= 0)
+             close(cfd);
+}
+
+void test_so_timestamping(void)
+{
+     cg_fd = test__join_cgroup(CG_NAME);
+     if (cg_fd < 0)
+             return;
+
+     if (create_netns())
+             goto done;
+
+     skel = so_timestamping__open();
+     if (!ASSERT_OK_PTR(skel, "open skel"))
+             goto done;
+
+     if (!ASSERT_OK(so_timestamping__load(skel), "load skel"))
+             goto done;
+
+     skel->links.skops_sockopt =
+             bpf_program__attach_cgroup(skel->progs.skops_sockopt, cg_fd);
+     if (!ASSERT_OK_PTR(skel->links.skops_sockopt, "attach cgroup"))
+             goto done;
+
+     test_tcp(AF_INET6);
+     test_tcp(AF_INET);
+
+done:
+     so_timestamping__destroy(skel);
+     close(cg_fd);
+}
tools/testing/selftests/bpf/progs/so_timestamping.c new file +92 -0
new file mode 100644
index 000000000000..f64e94dbd70e
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Tencent */
+
+#include "vmlinux.h"
+#include "bpf_tracing_net.h"
+#include <bpf/bpf_core_read.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+#include "bpf_misc.h"
+
+#define SK_BPF_CB_FLAGS 1009
+#define SK_BPF_CB_TX_TIMESTAMPING 1
+
+int nr_active;
+int nr_passive;
+int nr_sched;
+int nr_txsw;
+int nr_ack;
+
+struct sockopt_test {
+     int opt;
+     int new;
+};
+
+static const struct sockopt_test sol_socket_tests[] = {
+     { .opt = SK_BPF_CB_FLAGS, .new = SK_BPF_CB_TX_TIMESTAMPING, },
+     { .opt = 0, },
+};
+
+struct loop_ctx {
+     void *ctx;
+     struct sock *sk;
+};
+
+struct {
+     __uint(type, BPF_MAP_TYPE_HASH);
+     __type(key, u32);
+     __type(value, u64);
+     __uint(max_entries, 1024);
+} hash_map SEC(".maps");
+
+static u64 delay_tolerance_nsec = 5000000;
+
+static int bpf_test_sockopt_int(void *ctx, struct sock *sk,
+                             const struct sockopt_test *t,
+                             int level)
+{
+     int new, opt;
+
+     opt = t->opt;
+     new = t->new;
+
+     if (bpf_setsockopt(ctx, level, opt, &new, sizeof(new)))
+             return 1;
+
+     return 0;
+}
+
+static int bpf_test_socket_sockopt(__u32 i, struct loop_ctx *lc)
+{
+     const struct sockopt_test *t;
+
+     if (i >= ARRAY_SIZE(sol_socket_tests))
+             return 1;
+
+     t = &sol_socket_tests[i];
+     if (!t->opt)
+             return 1;
+
+     return bpf_test_sockopt_int(lc->ctx, lc->sk, t, SOL_SOCKET);
+}
+
+static int bpf_test_sockopt(void *ctx, struct sock *sk)
+{
+     struct loop_ctx lc = { .ctx = ctx, .sk = sk, };
+     int n;
+
+     n = bpf_loop(ARRAY_SIZE(sol_socket_tests), bpf_test_socket_sockopt, &lc, 0);
+     if (n != ARRAY_SIZE(sol_socket_tests))
+             return -1;
+
+     return 0;
+}
+
+static bool bpf_test_delay(struct bpf_sock_ops *skops)
+{
+     u64 timestamp = bpf_ktime_get_ns();
+     u32 seq = skops->args[2];
+     u64 *value;
+
+     value = bpf_map_lookup_elem(&hash_map, &seq);
+     if (value && (timestamp - *value > delay_tolerance_nsec)) {
Quoted 8 lines

tools/testing/selftests/bpf/progs/so_timestamping.c line 97

Quoted 5 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +5 -0
+             bpf_printk("time delay: %lu", timestamp - *value);
+             return false;
+     }
+
+     bpf_map_update_elem(&hash_map, &seq, &timestamp, BPF_ANY);

Maybe enforce that you expect value to be found for all cases except the first (SCHED). I.e., that they share the same seq/tskey.

Good suggestion. Will do it :)

Thanks,
Jason

Quoted 44 lines
Quoted 42 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +38 -1
+     return true;
+}
+
+SEC("sockops")
+int skops_sockopt(struct bpf_sock_ops *skops)
+{
+     struct bpf_sock *bpf_sk = skops->sk;
+     struct sock *sk;
+
+     if (!bpf_sk)
+             return 1;
+
+     sk = (struct sock *)bpf_skc_to_tcp_sock(bpf_sk);
+     if (!sk)
+             return 1;
+
+     switch (skops->op) {
+     case BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB:
+             nr_active += !bpf_test_sockopt(skops, sk);
+             break;
+     case BPF_SOCK_OPS_TS_SCHED_OPT_CB:
+             if (bpf_test_delay(skops))
+                     nr_sched += 1;
+             break;
+     case BPF_SOCK_OPS_TS_SW_OPT_CB:
+             if (bpf_test_delay(skops))
+                     nr_txsw += 1;
+             break;
+     case BPF_SOCK_OPS_TS_ACK_OPT_CB:
+             if (bpf_test_delay(skops))
+                     nr_ack += 1;
+             break;
+     }
+
+     return 1;
+}
+
+char _license[] SEC("license") = "GPL";
--

2.37.3

#44 lore raw

Re: [PATCH net-next v4 11/11] bpf: add simple bpf tests in the tx path for so_timstamping feature

In reply to Jason Xing
Quoted 155 lines · Jason Xing

From: Jason Xing <[email protected]>

Only check if we pass those three key points after we enable the bpf extension for so_timestamping. During each point, we can choose whether to print the current timestamp.

---
  .../bpf/prog_tests/so_timestamping.c          |  97 +++++++++++++
  .../selftests/bpf/progs/so_timestamping.c     | 135 ++++++++++++++++++
  2 files changed, 232 insertions(+)

create mode 100644 tools/testing/selftests/bpf/prog_tests/so_timestamping.c create mode 100644 tools/testing/selftests/bpf/progs/so_timestamping.c

tools/testing/selftests/bpf/prog_tests/so_timestamping.c new file +97 -0
new file mode 100644
index 000000000000..c5978444f9c8
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Tencent */
+
+#define _GNU_SOURCE
+#include <sched.h>
+#include <linux/socket.h>
+#include <linux/tls.h>
+#include <net/if.h>
+
+#include "test_progs.h"
+#include "cgroup_helpers.h"
+#include "network_helpers.h"
+
+#include "so_timestamping.skel.h"
+
+#define CG_NAME "/so-timestamping-test"
+
+static const char addr4_str[] = "127.0.0.1";
+static const char addr6_str[] = "::1";
+static struct so_timestamping *skel;
+static int cg_fd;
+
+static int create_netns(void)
+{
+	if (!ASSERT_OK(unshare(CLONE_NEWNET), "create netns"))
+		return -1;
+
+	if (!ASSERT_OK(system("ip link set dev lo up"), "set lo up"))
+		return -1;
+
+	return 0;
+}
+
+static void test_tcp(int family)
+{
+	struct so_timestamping__bss *bss = skel->bss;
+	char buf[] = "testing testing";
+	int sfd = -1, cfd = -1;
+	int n;
+
+	memset(bss, 0, sizeof(*bss));
+
+	sfd = start_server(family, SOCK_STREAM,
+			   family == AF_INET6 ? addr6_str : addr4_str, 0, 0);
+	if (!ASSERT_GE(sfd, 0, "start_server"))
+		goto out;
+
+	cfd = connect_to_fd(sfd, 0);
+	if (!ASSERT_GE(cfd, 0, "connect_to_fd_server")) {
+		close(sfd);
+		goto out;
+	}
+
+	n = write(cfd, buf, sizeof(buf));
+	if (!ASSERT_EQ(n, sizeof(buf), "send to server"))
+		goto out;
+
+	ASSERT_EQ(bss->nr_active, 1, "nr_active");
+	ASSERT_EQ(bss->nr_sched, 1, "nr_sched");
+	ASSERT_EQ(bss->nr_txsw, 1, "nr_txsw");
+	ASSERT_EQ(bss->nr_ack, 1, "nr_ack");
+
+out:
+	if (sfd >= 0)
+		close(sfd);
+	if (cfd >= 0)
+		close(cfd);
+}
+
+void test_so_timestamping(void)
+{
+	cg_fd = test__join_cgroup(CG_NAME);
+	if (cg_fd < 0)
+		return;
+
+	if (create_netns())
+		goto done;
+
+	skel = so_timestamping__open();
+	if (!ASSERT_OK_PTR(skel, "open skel"))
+		goto done;
+
+	if (!ASSERT_OK(so_timestamping__load(skel), "load skel"))
+		goto done;
+
+	skel->links.skops_sockopt =
+		bpf_program__attach_cgroup(skel->progs.skops_sockopt, cg_fd);
+	if (!ASSERT_OK_PTR(skel->links.skops_sockopt, "attach cgroup"))
+		goto done;
+
+	test_tcp(AF_INET6);
+	test_tcp(AF_INET);
+
+done:
+	so_timestamping__destroy(skel);
+	close(cg_fd);
+}
tools/testing/selftests/bpf/progs/so_timestamping.c new file +32 -0
new file mode 100644
index 000000000000..f64e94dbd70e
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Tencent */
+
+#include "vmlinux.h"
+#include "bpf_tracing_net.h"
+#include <bpf/bpf_core_read.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+#include "bpf_misc.h"
+
+#define SK_BPF_CB_FLAGS 1009
+#define SK_BPF_CB_TX_TIMESTAMPING 1
+
+int nr_active;
+int nr_passive;
+int nr_sched;
+int nr_txsw;
+int nr_ack;
+
+struct sockopt_test {
+	int opt;
+	int new;
+};
+
+static const struct sockopt_test sol_socket_tests[] = {
+	{ .opt = SK_BPF_CB_FLAGS, .new = SK_BPF_CB_TX_TIMESTAMPING, },
+	{ .opt = 0, },
+};
+
+struct loop_ctx {
+	void *ctx;
+	struct sock *sk;

tools/testing/selftests/bpf/progs/so_timestamping.c line 42

Quoted 10 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +10 -0
+};
+
+struct {
+	__uint(type, BPF_MAP_TYPE_HASH);
+	__type(key, u32);
+	__type(value, u64);
+	__uint(max_entries, 1024);
+} hash_map SEC(".maps");
+
+static u64 delay_tolerance_nsec = 5000000;

If I count right, 5ms may not a lot for the bpf CI and the test could become flaky. Probably good enough to ensure the delay is larger than the previous one.

Quoted 41 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +41 -0
+
+static int bpf_test_sockopt_int(void *ctx, struct sock *sk,
+				const struct sockopt_test *t,
+				int level)
+{
+	int new, opt;
+
+	opt = t->opt;
+	new = t->new;
+
+	if (bpf_setsockopt(ctx, level, opt, &new, sizeof(new)))
+		return 1;
+
+	return 0;
+}
+
+static int bpf_test_socket_sockopt(__u32 i, struct loop_ctx *lc)
+{
+	const struct sockopt_test *t;
+
+	if (i >= ARRAY_SIZE(sol_socket_tests))
+		return 1;
+
+	t = &sol_socket_tests[i];
+	if (!t->opt)
+		return 1;
+
+	return bpf_test_sockopt_int(lc->ctx, lc->sk, t, SOL_SOCKET);
+}
+
+static int bpf_test_sockopt(void *ctx, struct sock *sk)
+{
+	struct loop_ctx lc = { .ctx = ctx, .sk = sk, };
+	int n;
+
+	n = bpf_loop(ARRAY_SIZE(sol_socket_tests), bpf_test_socket_sockopt, &lc, 0);
+	if (n != ARRAY_SIZE(sol_socket_tests))
+		return -1;
+
+	return 0;
+}

tools/testing/selftests/bpf/progs/so_timestamping.c line 93

Quoted 10 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +10 -0
+
+static bool bpf_test_delay(struct bpf_sock_ops *skops)
+{
+	u64 timestamp = bpf_ktime_get_ns();
+	u32 seq = skops->args[2];
+	u64 *value;
+
+	value = bpf_map_lookup_elem(&hash_map, &seq);
+	if (value && (timestamp - *value > delay_tolerance_nsec)) {
+		bpf_printk("time delay: %lu", timestamp - *value);

Please try not to printk in selftests. The bpf CI cannot interpret it meaningfully and turn it into a PASS/FAIL signal.

tools/testing/selftests/bpf/progs/so_timestamping.c line 97

Quoted 4 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +4 -0
+		return false;
+	}
+
+	bpf_map_update_elem(&hash_map, &seq, &timestamp, BPF_ANY);

A nit.

	*value = timestamp;
Quoted 22 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +22 -0
+	return true;
+}
+
+SEC("sockops")
+int skops_sockopt(struct bpf_sock_ops *skops)
+{
+	struct bpf_sock *bpf_sk = skops->sk;
+	struct sock *sk;
+
+	if (!bpf_sk)
+		return 1;
+
+	sk = (struct sock *)bpf_skc_to_tcp_sock(bpf_sk);
+	if (!sk)
+		return 1;
+
+	switch (skops->op) {
+	case BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB:
+		nr_active += !bpf_test_sockopt(skops, sk);
+		break;
+	case BPF_SOCK_OPS_TS_SCHED_OPT_CB:
+		if (bpf_test_delay(skops))

tools/testing/selftests/bpf/progs/so_timestamping.c line 129

Quoted 10 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +10 -0
+			nr_sched += 1;
+		break;
+	case BPF_SOCK_OPS_TS_SW_OPT_CB:
+		if (bpf_test_delay(skops))
+			nr_txsw += 1;
+		break;
+	case BPF_SOCK_OPS_TS_ACK_OPT_CB:
+		if (bpf_test_delay(skops))
+			nr_ack += 1;
+		break;

The test is a good step forward. Thanks. Instead of one u64 as the map value, I think it can be improved to make the test more real to record the individual delay. e.g. the following map value:

struct delay_info {
	u64 sendmsg_ns;
	u32 sched_delay;  /* SCHED_OPT_CB - sendmsg_ns */
	u32 sw_snd_delay;
	u32 ack_delay;
};

and I think a bpf callback during the sendmsg is still needed in the next respin.

Quoted 6 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +6 -0
+	}
+
+	return 1;
+}
+
+char _license[] SEC("license") = "GPL";
author
#45 lore raw

Re: [PATCH net-next v4 11/11] bpf: add simple bpf tests in the tx path for so_timstamping feature

Quoted 162 lines · Martin KaFai Lau
Quoted 160 lines · Jason Xing

From: Jason Xing <[email protected]>

Only check if we pass those three key points after we enable the bpf extension for so_timestamping. During each point, we can choose whether to print the current timestamp.

---
  .../bpf/prog_tests/so_timestamping.c          |  97 +++++++++++++
  .../selftests/bpf/progs/so_timestamping.c     | 135 ++++++++++++++++++
  2 files changed, 232 insertions(+)

create mode 100644 tools/testing/selftests/bpf/prog_tests/so_timestamping.c create mode 100644 tools/testing/selftests/bpf/progs/so_timestamping.c

tools/testing/selftests/bpf/prog_tests/so_timestamping.c new file +97 -0
new file mode 100644
index 000000000000..c5978444f9c8
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Tencent */
+
+#define _GNU_SOURCE
+#include <sched.h>
+#include <linux/socket.h>
+#include <linux/tls.h>
+#include <net/if.h>
+
+#include "test_progs.h"
+#include "cgroup_helpers.h"
+#include "network_helpers.h"
+
+#include "so_timestamping.skel.h"
+
+#define CG_NAME "/so-timestamping-test"
+
+static const char addr4_str[] = "127.0.0.1";
+static const char addr6_str[] = "::1";
+static struct so_timestamping *skel;
+static int cg_fd;
+
+static int create_netns(void)
+{
+     if (!ASSERT_OK(unshare(CLONE_NEWNET), "create netns"))
+             return -1;
+
+     if (!ASSERT_OK(system("ip link set dev lo up"), "set lo up"))
+             return -1;
+
+     return 0;
+}
+
+static void test_tcp(int family)
+{
+     struct so_timestamping__bss *bss = skel->bss;
+     char buf[] = "testing testing";
+     int sfd = -1, cfd = -1;
+     int n;
+
+     memset(bss, 0, sizeof(*bss));
+
+     sfd = start_server(family, SOCK_STREAM,
+                        family == AF_INET6 ? addr6_str : addr4_str, 0, 0);
+     if (!ASSERT_GE(sfd, 0, "start_server"))
+             goto out;
+
+     cfd = connect_to_fd(sfd, 0);
+     if (!ASSERT_GE(cfd, 0, "connect_to_fd_server")) {
+             close(sfd);
+             goto out;
+     }
+
+     n = write(cfd, buf, sizeof(buf));
+     if (!ASSERT_EQ(n, sizeof(buf), "send to server"))
+             goto out;
+
+     ASSERT_EQ(bss->nr_active, 1, "nr_active");
+     ASSERT_EQ(bss->nr_sched, 1, "nr_sched");
+     ASSERT_EQ(bss->nr_txsw, 1, "nr_txsw");
+     ASSERT_EQ(bss->nr_ack, 1, "nr_ack");
+
+out:
+     if (sfd >= 0)
+             close(sfd);
+     if (cfd >= 0)
+             close(cfd);
+}
+
+void test_so_timestamping(void)
+{
+     cg_fd = test__join_cgroup(CG_NAME);
+     if (cg_fd < 0)
+             return;
+
+     if (create_netns())
+             goto done;
+
+     skel = so_timestamping__open();
+     if (!ASSERT_OK_PTR(skel, "open skel"))
+             goto done;
+
+     if (!ASSERT_OK(so_timestamping__load(skel), "load skel"))
+             goto done;
+
+     skel->links.skops_sockopt =
+             bpf_program__attach_cgroup(skel->progs.skops_sockopt, cg_fd);
+     if (!ASSERT_OK_PTR(skel->links.skops_sockopt, "attach cgroup"))
+             goto done;
+
+     test_tcp(AF_INET6);
+     test_tcp(AF_INET);
+
+done:
+     so_timestamping__destroy(skel);
+     close(cg_fd);
+}
tools/testing/selftests/bpf/progs/so_timestamping.c new file +37 -0
new file mode 100644
index 000000000000..f64e94dbd70e
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Tencent */
+
+#include "vmlinux.h"
+#include "bpf_tracing_net.h"
+#include <bpf/bpf_core_read.h>
+#include <bpf/bpf_helpers.h>
+#include <bpf/bpf_tracing.h>
+#include "bpf_misc.h"
+
+#define SK_BPF_CB_FLAGS 1009
+#define SK_BPF_CB_TX_TIMESTAMPING 1
+
+int nr_active;
+int nr_passive;
+int nr_sched;
+int nr_txsw;
+int nr_ack;
+
+struct sockopt_test {
+     int opt;
+     int new;
+};
+
+static const struct sockopt_test sol_socket_tests[] = {
+     { .opt = SK_BPF_CB_FLAGS, .new = SK_BPF_CB_TX_TIMESTAMPING, },
+     { .opt = 0, },
+};
+
+struct loop_ctx {
+     void *ctx;
+     struct sock *sk;
+};
+
+struct {
+     __uint(type, BPF_MAP_TYPE_HASH);
+     __type(key, u32);
Quoted 8 lines

tools/testing/selftests/bpf/progs/so_timestamping.c line 42

Quoted 5 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +5 -0
+     __type(value, u64);
+     __uint(max_entries, 1024);
+} hash_map SEC(".maps");
+
+static u64 delay_tolerance_nsec = 5000000;

If I count right, 5ms may not a lot for the bpf CI and the test could become flaky. Probably good enough to ensure the delay is larger than the previous one.

You're right, initially I set 2ms which make the test flaky. How about 20ms? We cannot ensure each delta (calculated between two tx points) is larger than the previous one.

Quoted 47 lines
Quoted 47 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +46 -0
+
+static int bpf_test_sockopt_int(void *ctx, struct sock *sk,
+                             const struct sockopt_test *t,
+                             int level)
+{
+     int new, opt;
+
+     opt = t->opt;
+     new = t->new;
+
+     if (bpf_setsockopt(ctx, level, opt, &new, sizeof(new)))
+             return 1;
+
+     return 0;
+}
+
+static int bpf_test_socket_sockopt(__u32 i, struct loop_ctx *lc)
+{
+     const struct sockopt_test *t;
+
+     if (i >= ARRAY_SIZE(sol_socket_tests))
+             return 1;
+
+     t = &sol_socket_tests[i];
+     if (!t->opt)
+             return 1;
+
+     return bpf_test_sockopt_int(lc->ctx, lc->sk, t, SOL_SOCKET);
+}
+
+static int bpf_test_sockopt(void *ctx, struct sock *sk)
+{
+     struct loop_ctx lc = { .ctx = ctx, .sk = sk, };
+     int n;
+
+     n = bpf_loop(ARRAY_SIZE(sol_socket_tests), bpf_test_socket_sockopt, &lc, 0);
+     if (n != ARRAY_SIZE(sol_socket_tests))
+             return -1;
+
+     return 0;
+}
+
+static bool bpf_test_delay(struct bpf_sock_ops *skops)
+{
+     u64 timestamp = bpf_ktime_get_ns();
+     u32 seq = skops->args[2];
Quoted 8 lines

tools/testing/selftests/bpf/progs/so_timestamping.c line 93

Quoted 5 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +5 -0
+     u64 *value;
+
+     value = bpf_map_lookup_elem(&hash_map, &seq);
+     if (value && (timestamp - *value > delay_tolerance_nsec)) {
+             bpf_printk("time delay: %lu", timestamp - *value);

Please try not to printk in selftests. The bpf CI cannot interpret it meaningfully and turn it into a PASS/FAIL signal.

All right.

Quoted 9 lines

tools/testing/selftests/bpf/progs/so_timestamping.c line 97

Quoted 5 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +4 -0
+             return false;
+     }
+
+     bpf_map_update_elem(&hash_map, &seq, &timestamp, BPF_ANY);

A nit.

        *value = timestamp;

Will fix it.

Quoted 38 lines
Quoted 23 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +22 -0
+     return true;
+}
+
+SEC("sockops")
+int skops_sockopt(struct bpf_sock_ops *skops)
+{
+     struct bpf_sock *bpf_sk = skops->sk;
+     struct sock *sk;
+
+     if (!bpf_sk)
+             return 1;
+
+     sk = (struct sock *)bpf_skc_to_tcp_sock(bpf_sk);
+     if (!sk)
+             return 1;
+
+     switch (skops->op) {
+     case BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB:
+             nr_active += !bpf_test_sockopt(skops, sk);
+             break;
+     case BPF_SOCK_OPS_TS_SCHED_OPT_CB:
+             if (bpf_test_delay(skops))

tools/testing/selftests/bpf/progs/so_timestamping.c line 129

Quoted 10 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +10 -0
+                     nr_sched += 1;
+             break;
+     case BPF_SOCK_OPS_TS_SW_OPT_CB:
+             if (bpf_test_delay(skops))
+                     nr_txsw += 1;
+             break;
+     case BPF_SOCK_OPS_TS_ACK_OPT_CB:
+             if (bpf_test_delay(skops))
+                     nr_ack += 1;
+             break;

The test is a good step forward. Thanks. Instead of one u64 as the map value, I think it can be improved to make the test more real to record the individual delay. e.g. the following map value:

Quoted 7 lines
struct delay_info {
        u64 sendmsg_ns;
        u32 sched_delay;  /* SCHED_OPT_CB - sendmsg_ns */
        u32 sw_snd_delay;
        u32 ack_delay;
};

Good advice :)

Quoted 1 line

and I think a bpf callback during the sendmsg is still needed in the next respin.

Okay, I planned to introduce a new BPF_SOCK_OPS_TS_SENDMSG_OPT_CB after this patchset gets merged. Since you've already asked, I will surely follow :) Thanks.

Quoted 8 lines
Quoted 7 lines
tools/testing/selftests/bpf/progs/so_timestamping.c new file +6 -0
+     }
+
+     return 1;
+}
+
+char _license[] SEC("license") = "GPL";
#46 lore raw

Re: [PATCH net-next v4 11/11] bpf: add simple bpf tests in the tx path for so_timstamping feature

Quoted 8 lines · Jason Xing
Quoted 4 lines
Quoted 1 line

+static u64 delay_tolerance_nsec = 5000000;

If I count right, 5ms may not a lot for the bpf CI and the test could become flaky. Probably good enough to ensure the delay is larger than the previous one.

You're right, initially I set 2ms which make the test flaky. How about 20ms? We cannot ensure each delta (calculated between two tx points) is larger than the previous one.

or I was thinking the delay is always measured from sendmsg_ns.

Regardless, whatever way the delay of a tx point is measured from (always from sendmsg_ns or from the previous tx point), it can also just check the measured delay is +ve or something like that instead of having a hard coded maximum delay here.

The following "struct delay_info" may not be the best. Feel free to adjust.

Quoted 6 lines
Quoted 6 lines
struct delay_info {
         u64 sendmsg_ns;
         u32 sched_delay;  /* SCHED_OPT_CB - sendmsg_ns */
         u32 sw_snd_delay;
         u32 ack_delay;
};
author
#47 lore raw

Re: [PATCH net-next v4 11/11] bpf: add simple bpf tests in the tx path for so_timstamping feature

Quoted 11 lines · Martin KaFai Lau
Quoted 8 lines · Jason Xing
Quoted 4 lines
Quoted 1 line

+static u64 delay_tolerance_nsec = 5000000;

If I count right, 5ms may not a lot for the bpf CI and the test could become flaky. Probably good enough to ensure the delay is larger than the previous one.

You're right, initially I set 2ms which make the test flaky. How about 20ms? We cannot ensure each delta (calculated between two tx points) is larger than the previous one.

Quoted 6 lines

or I was thinking the delay is always measured from sendmsg_ns.

Regardless, whatever way the delay of a tx point is measured from (always from sendmsg_ns or from the previous tx point), it can also just check the measured delay is +ve or something like that instead of having a hard coded maximum delay here.

That makes things simpler. Got it.

Quoted 2 lines

The following "struct delay_info" may not be the best. Feel free to adjust.

Okay.

Quoted 8 lines
Quoted 7 lines
Quoted 7 lines
struct delay_info {
         u64 sendmsg_ns;
         u32 sched_delay;  /* SCHED_OPT_CB - sendmsg_ns */
         u32 sw_snd_delay;
         u32 ack_delay;
};