PCI on Lite5200/Icecube, known issues?
Hello,
The access to PCI memory space does not to work (I allways read 0xff) on my Icecube-Eval-Board. Are there any known issues/bugs with using the PCI on the Lite5200/Icecube board with 2.6.23? Has it been tested? I realized, that CONFIG_PCI is not set in the default configuration.
Thanks,
Wolfgang.
Quoted 6 lines · Wolfgang Grandegger
Hello,
The access to PCI memory space does not to work (I allways read
0xff) on my Icecube-Eval-Board. Are there any known issues/bugs with using the PCI on the Lite5200/Icecube board with 2.6.23? Has it been tested? I realized, thatCONFIG_PCIis not set in the default configuration.
arch/ppc or arch/powerpc?
I'm not a PCI expert, but I just fired up my Lite5200 with a couple of eth adapters plugged in and the devices are usable. This is a 2.6.24-rc1 arch/powerpc kernel.
Cheers,
g.
Signature · 4 lines
Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. [email protected] (403) 399-0195
Quoted 8 lines · Grant Likely
Quoted 6 lines · Wolfgang Grandegger
Hello,
The access to PCI memory space does not to work (I allways read
0xff) on my Icecube-Eval-Board. Are there any known issues/bugs with using the PCI on the Lite5200/Icecube board with 2.6.23? Has it been tested? I realized, thatCONFIG_PCIis not set in the default configuration.
Quoted 5 lines
arch/ppcorarch/powerpc?I'm not a PCI expert, but I just fired up my Lite5200 with a couple of eth adapters plugged in and the devices are usable. This is a 2.6.24-rc1
arch/powerpckernel.
I'm using a 2.6.23 arch/powerpc kernel. And my eepro100 card does not work either:
e100: probe of 0000:00:18.0 failed with error -11
It looks like that 2.6.23 needs some more patches.
Thanks.
Wolfgang.
Quoted 14 lines · Wolfgang Grandegger
Quoted 7 lines · Grant Likely
Quoted 6 lines · Wolfgang Grandegger
Hello,
The access to PCI memory space does not to work (I allways read
0xff) on my Icecube-Eval-Board. Are there any known issues/bugs with using the PCI on the Lite5200/Icecube board with 2.6.23? Has it been tested? I realized, thatCONFIG_PCIis not set in the default configuration.Quoted 5 lines
arch/ppcorarch/powerpc?I'm not a PCI expert, but I just fired up my Lite5200 with a couple of eth adapters plugged in and the devices are usable. This is a 2.6.24-rc1
arch/powerpckernel.
Quoted 5 lines
I'm using a 2.6.23
arch/powerpckernel. And my eepro100 card does not work either:e100: probe of 0000:00:18.0 failed with error -11
It looks like that 2.6.23 needs some more patches.
Indeed, it works with 2.6.24-rc1:
e100: eth0: e100_probe: addr 0xa0000000, irq 16, MAC addr 00:0e:0c:74:8c:f2
Wolfgang.
Quoted 18 lines · Wolfgang Grandegger
Quoted 17 lines · Wolfgang Grandegger
Quoted 7 lines · Grant Likely
Quoted 6 lines · Wolfgang Grandegger
Hello,
The access to PCI memory space does not to work (I allways read
0xff) on my Icecube-Eval-Board. Are there any known issues/bugs with using the PCI on the Lite5200/Icecube board with 2.6.23? Has it been tested? I realized, thatCONFIG_PCIis not set in the default configuration.Quoted 5 lines
arch/ppcorarch/powerpc?I'm not a PCI expert, but I just fired up my Lite5200 with a couple of eth adapters plugged in and the devices are usable. This is a 2.6.24-rc1
arch/powerpckernel.I'm using a 2.6.23
arch/powerpckernel. And my eepro100 card does not work either:
Quoted 7 lines
Quoted 3 lines
e100: probe of 0000:00:18.0 failed with error -11
It looks like that 2.6.23 needs some more patches.
Indeed, it works with 2.6.24-rc1:
e100: eth0:
e100_probe: addr0xa0000000, irq 16, MAC addr 00:0e:0c:74:8c:f2
Okay, when I get a chance I'll try 2.6.23 on my lite5200
Cheers,
g.
Signature · 4 lines
Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. [email protected] (403) 399-0195