Skip to contentSkip to conversation

PCI on Lite5200/Icecube, known issues?

DISCUSSION Wolfgang Grandegger 2 participants 5 messages Oct 25, 2007

lore
Share & tools
lore
#0 lore raw

Hello,

The access to PCI memory space does not to work (I allways read 0xff) on my Icecube-Eval-Board. Are there any known issues/bugs with using the PCI on the Lite5200/Icecube board with 2.6.23? Has it been tested? I realized, that CONFIG_PCI is not set in the default configuration.

Thanks,

Wolfgang.

#1 lore raw
Quoted 6 lines · Wolfgang Grandegger

Hello,

The access to PCI memory space does not to work (I allways read 0xff) on my Icecube-Eval-Board. Are there any known issues/bugs with using the PCI on the Lite5200/Icecube board with 2.6.23? Has it been tested? I realized, that CONFIG_PCI is not set in the default configuration.

arch/ppc or arch/powerpc?

I'm not a PCI expert, but I just fired up my Lite5200 with a couple of eth adapters plugged in and the devices are usable. This is a 2.6.24-rc1 arch/powerpc kernel.

Cheers,
g.

Signature · 4 lines
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
[email protected]
(403) 399-0195
#2 lore raw
Quoted 8 lines · Grant Likely
Quoted 6 lines · Wolfgang Grandegger

Hello,

The access to PCI memory space does not to work (I allways read 0xff) on my Icecube-Eval-Board. Are there any known issues/bugs with using the PCI on the Lite5200/Icecube board with 2.6.23? Has it been tested? I realized, that CONFIG_PCI is not set in the default configuration.

Quoted 5 lines

arch/ppc or arch/powerpc?

I'm not a PCI expert, but I just fired up my Lite5200 with a couple of eth adapters plugged in and the devices are usable. This is a 2.6.24-rc1 arch/powerpc kernel.

I'm using a 2.6.23 arch/powerpc kernel. And my eepro100 card does not work either:

e100: probe of 0000:00:18.0 failed with error -11

It looks like that 2.6.23 needs some more patches.

Thanks.

Wolfgang.

#3 lore raw
Quoted 14 lines · Wolfgang Grandegger
Quoted 7 lines · Grant Likely
Quoted 6 lines · Wolfgang Grandegger

Hello,

The access to PCI memory space does not to work (I allways read 0xff) on my Icecube-Eval-Board. Are there any known issues/bugs with using the PCI on the Lite5200/Icecube board with 2.6.23? Has it been tested? I realized, that CONFIG_PCI is not set in the default configuration.

Quoted 5 lines

arch/ppc or arch/powerpc?

I'm not a PCI expert, but I just fired up my Lite5200 with a couple of eth adapters plugged in and the devices are usable. This is a 2.6.24-rc1 arch/powerpc kernel.

Quoted 5 lines

I'm using a 2.6.23 arch/powerpc kernel. And my eepro100 card does not work either:

e100: probe of 0000:00:18.0 failed with error -11

It looks like that 2.6.23 needs some more patches.

Indeed, it works with 2.6.24-rc1:

e100: eth0: e100_probe: addr 0xa0000000, irq 16, MAC addr 00:0e:0c:74:8c:f2

Wolfgang.

#4 lore raw
Quoted 18 lines · Wolfgang Grandegger
Quoted 17 lines · Wolfgang Grandegger
Quoted 7 lines · Grant Likely
Quoted 6 lines · Wolfgang Grandegger

Hello,

The access to PCI memory space does not to work (I allways read 0xff) on my Icecube-Eval-Board. Are there any known issues/bugs with using the PCI on the Lite5200/Icecube board with 2.6.23? Has it been tested? I realized, that CONFIG_PCI is not set in the default configuration.

Quoted 5 lines

arch/ppc or arch/powerpc?

I'm not a PCI expert, but I just fired up my Lite5200 with a couple of eth adapters plugged in and the devices are usable. This is a 2.6.24-rc1 arch/powerpc kernel.

I'm using a 2.6.23 arch/powerpc kernel. And my eepro100 card does not work either:

Quoted 7 lines
Quoted 3 lines

e100: probe of 0000:00:18.0 failed with error -11

It looks like that 2.6.23 needs some more patches.

Indeed, it works with 2.6.24-rc1:

e100: eth0: e100_probe: addr 0xa0000000, irq 16, MAC addr 00:0e:0c:74:8c:f2

Okay, when I get a chance I'll try 2.6.23 on my lite5200

Cheers,
g.

Signature · 4 lines
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
[email protected]
(403) 399-0195