Skip to contentSkip to conversation

arm64: Enable reset and pinctrl for ARCH_BRCMSTB

PATCH In review Florian Fainelli 1 participant 4 messages May 31, 2019 – Jun 11, 2019 arm64

lore
Share & tools
lore
#0 lore raw

cover arm64: Enable reset and pinctrl for ARCH_BRCMSTB

This patch series enabled PINCTRL and ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB since we have platforms that require these two subsystems.

Doug Berger (1):
arm64: Enable PINCTRL for ARCH_BRCMSTB

Jim Quinlan (1):
arm64: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB

 arch/arm64/Kconfig.platforms | 2 ++
 1 file changed, 2 insertions(+)
Signature · 7 lines
2.17.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#1 lore raw

PATCH 1/2 arm64: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB

From: Jim Quinlan <[email protected]>

Allow the use of reset controllers on ARCH_BRCMSTB such as the recently introduced RESET_BRCMSTB driver.

---
 arch/arm64/Kconfig.platforms | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/Kconfig.platforms +1 -0
index d0aca109bdf6..2d8b1afa3799 100644
@@ -65,6 +65,7 @@ config ARCH_BITMAIN
 
 config ARCH_BRCMSTB
 	bool "Broadcom Set-Top-Box SoCs"
+	select ARCH_HAS_RESET_CONTROLLER
 	select BCM7038_L1_IRQ
 	select BRCMSTB_L2_IRQ
 	select GENERIC_IRQ_CHIP
Signature · 7 lines
2.17.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#2 lore raw

PATCH 2/2 arm64: Enable PINCTRL for ARCH_BRCMSTB

In reply to Florian Fainelli

From: Doug Berger <[email protected]>

ARCH_BRCMSTB needs to use the BCM2835 pin controller for chips like BCM7211 which adopted that pin controller for GPIO.

---
 arch/arm64/Kconfig.platforms | 1 +
 1 file changed, 1 insertion(+)
arch/arm64/Kconfig.platforms +1 -0
index 2d8b1afa3799..af0d1270094a 100644
@@ -69,6 +69,7 @@ config ARCH_BRCMSTB
 	select BCM7038_L1_IRQ
 	select BRCMSTB_L2_IRQ
 	select GENERIC_IRQ_CHIP
+	select PINCTRL
 	help
 	  This enables support for Broadcom's ARMv8 Set Top Box SoCs
 
Signature · 7 lines
2.17.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#3 lore raw
In reply to Florian Fainelli
Quoted 8 lines · Florian Fainelli

This patch series enabled PINCTRL and ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB since we have platforms that require these two subsystems.

Doug Berger (1):
arm64: Enable PINCTRL for ARCH_BRCMSTB

Jim Quinlan (1):
arm64: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB

Series applied to soc-arm64/next, thanks!

Signature · 6 lines
Florian

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel