Skip to contentSkip to conversation

ARM: dts: Aspeed: Add I2C busses to AST2600 and Tacoma

PATCH In review Eddie James 4 participants 6 messages Sep 4, 2019 – Sep 10, 2019

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 ARM: dts: Aspeed: Add I2C busses to AST2600 and Tacoma

Add all the I2C busses to the AST2600 dtsi. Set the busses status to "okay" and add all the devices present on the Tacoma card to the busses.

---
 arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 384 ++++++++++++++++++++++++++++
 arch/arm/boot/dts/aspeed-g6.dtsi            | 272 ++++++++++++++++++++
 2 files changed, 656 insertions(+)
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +384 -0
index 0a38bc0..408af00 100644
@@ -3,6 +3,7 @@
 /dts-v1/;
 
 #include "aspeed-g6.dtsi"
+#include <dt-bindings/leds/leds-pca955x.h>
 
 / {
 	model = "Tacoma";
@@ -37,3 +38,386 @@
 &fsim0 {
 	status = "okay";
 };
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	bmp: bmp280@77 {
+		compatible = "bosch,bmp280";
+		reg = <0x77>;
+		#io-channel-cells = <1>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
arch/arm/boot/dts/aspeed-g6.dtsi +272 -0

284 lines not on this page · raw message

Signature · 1 line
1.8.3.1
#1 lore raw

PATCH 2/2 i2c: Aspeed: Add AST2600 compatible

---
 drivers/i2c/busses/i2c-aspeed.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/i2c/busses/i2c-aspeed.c +4 -0
index 8931792..1943977 100644
@@ -1274,6 +1274,10 @@ static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus)
 		.compatible = "aspeed,ast2500-i2c-bus",
 		.data = aspeed_i2c_25xx_get_clk_reg_val,
 	},
+	{
+		.compatible = "aspeed,ast2600-i2c-bus",
+		.data = aspeed_i2c_25xx_get_clk_reg_val,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
Signature · 1 line
1.8.3.1
#2 lore raw

Re: [PATCH linux dev-5.2 2/2] i2c: Aspeed: Add AST2600 compatible

Quoted 1 line · Eddie James

Have you tested this on hardware? What was the outcome?

Andrew

Quoted 23 lines
---
 drivers/i2c/busses/i2c-aspeed.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/i2c/busses/i2c-aspeed.c +4 -0
index 8931792..1943977 100644
@@ -1274,6 +1274,10 @@ static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus)
 		.compatible = "aspeed,ast2500-i2c-bus",
 		.data = aspeed_i2c_25xx_get_clk_reg_val,
 	},
+	{
+		.compatible = "aspeed,ast2600-i2c-bus",
+		.data = aspeed_i2c_25xx_get_clk_reg_val,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
Signature · 1 line
1.8.3.1
#3 lore raw

Re: [PATCH linux dev-5.2 2/2] i2c: Aspeed: Add AST2600 compatible

Quoted 4 lines · Andrew Jeffery
Quoted 1 line · Eddie James

Have you tested this on hardware? What was the outcome?

Yes. The I2C devices I accessed through hwmon worked fine, including the PSU, tmp275, and ir35521. I didn't check every single device on every bus, but everything seemed to probe up fine.

Thanks,

Eddie

Quoted 26 lines

Andrew

Quoted 23 lines
---
  drivers/i2c/busses/i2c-aspeed.c | 4 ++++
  1 file changed, 4 insertions(+)
drivers/i2c/busses/i2c-aspeed.c +4 -0
index 8931792..1943977 100644
@@ -1274,6 +1274,10 @@ static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus)
  		.compatible = "aspeed,ast2500-i2c-bus",
  		.data = aspeed_i2c_25xx_get_clk_reg_val,
  	},
+	{
+		.compatible = "aspeed,ast2600-i2c-bus",
+		.data = aspeed_i2c_25xx_get_clk_reg_val,
+	},
  	{ },
  };
  MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
Signature · 1 line
1.8.3.1
maintainer
#4 lore raw

Re: [PATCH linux dev-5.2 2/2] i2c: Aspeed: Add AST2600 compatible

Quoted 7 lines · Eddie James
Quoted 4 lines · Andrew Jeffery
Quoted 1 line · Eddie James

Have you tested this on hardware? What was the outcome?

When probing I see these invalid resource warnings:

[    7.179489] aspeed-i2c-bus 1e78a080.i2c-bus: invalid resource
[    7.183615] aspeed-i2c-bus 1e78a080.i2c-bus: i2c bus 0 registered

(byte mode), irq 25

Can you please fix those?

Cheers,

Joel

#5 lore raw
In reply to Eddie James
Quoted 8 lines · Eddie James

Add all the I2C busses to the AST2600 dtsi. Set the busses status to "okay" and add all the devices present on the Tacoma card to the busses.

---
 arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 384 ++++++++++++++++++++++++++++
 arch/arm/boot/dts/aspeed-g6.dtsi            | 272 ++++++++++++++++++++

Bit of a nit, but can you please split the dtsi change from the tacoma change?

Quoted 696 lines
 2 files changed, 656 insertions(+)
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +384 -0
index 0a38bc0..408af00 100644
@@ -3,6 +3,7 @@
 /dts-v1/;
 
 #include "aspeed-g6.dtsi"
+#include <dt-bindings/leds/leds-pca955x.h>
 
 / {
 	model = "Tacoma";
@@ -37,3 +38,386 @@
 &fsim0 {
 	status = "okay";
 };
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	bmp: bmp280@77 {
+		compatible = "bosch,bmp280";
+		reg = <0x77>;
+		#io-channel-cells = <1>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
arch/arm/boot/dts/aspeed-g6.dtsi +272 -0
index 12569e5..0a8e08a 100644
@@ -12,6 +12,22 @@
 	interrupt-parent = <&gic>;
 
 	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
 		serial4 = &uart5;
 	};
 
@@ -255,6 +271,262 @@
 				};
 			};
 
+			i2c0: i2c-bus@1e78a80 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				reg = <0x1e78a080 0x80>;
+				compatible = "aspeed,ast2600-i2c-bus";
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				resets = <&syscon ASPEED_RESET_I2C>;
+				bus-frequency = <100000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				status = "disabled";
+			};
+
+			i2c1: i2c-bus@1e78a100 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				reg = <0x1e78a100 0x80>;
+				compatible = "aspeed,ast2600-i2c-bus";
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				resets = <&syscon ASPEED_RESET_I2C>;
+				bus-frequency = <100000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c2_default>;
+				status = "disabled";
+			};
+
+			i2c2: i2c-bus@1e78a180 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				reg = <0x1e78a180 0x80>;
+				compatible = "aspeed,ast2600-i2c-bus";
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				resets = <&syscon ASPEED_RESET_I2C>;
+				bus-frequency = <100000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c3_default>;
+				status = "disabled";
+			};
+
+			i2c3: i2c-bus@1e78a200 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				reg = <0x1e78a200 0x80>;
+				compatible = "aspeed,ast2600-i2c-bus";
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				resets = <&syscon ASPEED_RESET_I2C>;
+				bus-frequency = <100000>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c4_default>;
+				status = "disabled";
+			};
+
+			i2c4: i2c-bus@1e78a280 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				reg = <0x1e78a280 0x80>;
+				compatible = "aspeed,ast2600-i2c-bus";
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				resets = <&syscon ASPEED_RESET_I2C>;
+				bus-frequency = <100000>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c5_default>;
+				status = "disabled";
+			};
+
+			i2c5: i2c-bus@1e78a300 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				reg = <0x1e78a300 0x80>;
+				compatible = "aspeed,ast2600-i2c-bus";
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				resets = <&syscon ASPEED_RESET_I2C>;
+				bus-frequency = <100000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c6_default>;
+				status = "disabled";
+			};
+
+			i2c6: i2c-bus@380 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				reg = <0x1e78a380 0x80>;
+				compatible = "aspeed,ast2600-i2c-bus";
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				resets = <&syscon ASPEED_RESET_I2C>;
+				bus-frequency = <100000>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c7_default>;
+				status = "disabled";
+			};
+
+			i2c7: i2c-bus@1e78a400 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				reg = <0x1e78a400 0x80>;
+				compatible = "aspeed,ast2600-i2c-bus";
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				resets = <&syscon ASPEED_RESET_I2C>;
+				bus-frequency = <100000>;
+				interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c8_default>;
+				status = "disabled";
+			};
+
+			i2c8: i2c-bus@1e78a480 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				reg = <0x1e78a480 0x80>;
+				compatible = "aspeed,ast2600-i2c-bus";
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				resets = <&syscon ASPEED_RESET_I2C>;
+				bus-frequency = <100000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c9_default>;
+				status = "disabled";
+			};
+
+			i2c9: i2c-bus@1e78a500 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				reg = <0x1e78a500 0x80>;
+				compatible = "aspeed,ast2600-i2c-bus";
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				resets = <&syscon ASPEED_RESET_I2C>;
+				bus-frequency = <100000>;
+				interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c10_default>;
+				status = "disabled";
+			};
+
+			i2c10: i2c-bus@1e78a580 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				reg = <0x1e78a580 0x80>;
+				compatible = "aspeed,ast2600-i2c-bus";
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				resets = <&syscon ASPEED_RESET_I2C>;
+				bus-frequency = <100000>;
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c11_default>;
+				status = "disabled";
+			};
+
+			i2c11: i2c-bus@1e78a600 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				reg = <0x1e78a600 0x80>;
+				compatible = "aspeed,ast2600-i2c-bus";
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				resets = <&syscon ASPEED_RESET_I2C>;
+				bus-frequency = <100000>;
+				interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c12_default>;
+				status = "disabled";
+			};
+
+			i2c12: i2c-bus@1e78a680 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				reg = <0x1e78a680 0x80>;
+				compatible = "aspeed,ast2600-i2c-bus";
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				resets = <&syscon ASPEED_RESET_I2C>;
+				bus-frequency = <100000>;
+				interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c13_default>;
+				status = "disabled";
+			};
+
+			i2c13: i2c-bus@1e78a700 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				reg = <0x1e78a700 0x80>;
+				compatible = "aspeed,ast2600-i2c-bus";
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				resets = <&syscon ASPEED_RESET_I2C>;
+				bus-frequency = <100000>;
+				interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c14_default>;
+				status = "disabled";
+			};
+
+			i2c14: i2c-bus@1e78a780 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				reg = <0x1e78a780 0x80>;
+				compatible = "aspeed,ast2600-i2c-bus";
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				resets = <&syscon ASPEED_RESET_I2C>;
+				bus-frequency = <100000>;
+				interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c15_default>;
+				status = "disabled";
+			};
+
+			i2c15: i2c-bus@1e78a800 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#interrupt-cells = <1>;
+
+				reg = <0x1e78a800 0x80>;
+				compatible = "aspeed,ast2600-i2c-bus";
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				resets = <&syscon ASPEED_RESET_I2C>;
+				bus-frequency = <100000>;
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c16_default>;
+				status = "disabled";
+			};
+
 			fsim0: fsi@1e79b000 {
 				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
 				reg = <0x1e79b000 0x94>;
Signature · 1 line
1.8.3.1