u-boot serial console not working
i'm using a MPC 8280 Rattler board. i'm trying to port u-boot on to it. but the serial console is not coming on the hyperterminal. i have debugged teh code with BDI debugger and has checked that the program counter goes and waits at the serial_getc() function in smc.c. but the serial console doesn't appear at all. i'm using u-boot 1.1.4
please if somebody could help in it
thanks and regards
Vikas Makhija
Quoted 5 lines · In message <[email protected]> you wrote:
i'm using a MPC 8280 Rattler board. i'm trying to port u-boot on to it. but the serial console is not coming on the hyperterminal. i have debugged teh code with BDI debugger and has checked that the program counter goes and waits at the
serial_getc()function insmc.c. but the serial console doesn't appear at all. i'm using u-boot 1.1.4
Make sure that you have h/w and s/w flow control diabled in your terminal emulation program. If this doesn't help, then check the clock and BRG settings and the clock routing.
Best regards,
Wolfgang Denk
Signature · 5 lines
Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There's nothing disgusting about it [the Companion]. It's just another life form, that's all. You get used to those things. -- McCoy, "Metamorphosis", stardate 3219.8