Skip to contentSkip to conversation

u-boot serial console not working

U-Boot-Users vikas makhija 2 participants 2 messages Apr 3, 2006

lore
Share & tools
lore
#0 lore raw

i'm using a MPC 8280 Rattler board. i'm trying to port u-boot on to it. but the serial console is not coming on the hyperterminal. i have debugged teh code with BDI debugger and has checked that the program counter goes and waits at the serial_getc() function in smc.c. but the serial console doesn't appear at all. i'm using u-boot 1.1.4
please if somebody could help in it

thanks and regards
Vikas Makhija

#1 lore raw
Quoted 5 lines · In message <[email protected]> you wrote:

i'm using a MPC 8280 Rattler board. i'm trying to port u-boot on to it. but the serial console is not coming on the hyperterminal. i have debugged teh code with BDI debugger and has checked that the program counter goes and waits at the serial_getc() function in smc.c. but the serial console doesn't appear at all. i'm using u-boot 1.1.4

Make sure that you have h/w and s/w flow control diabled in your terminal emulation program. If this doesn't help, then check the clock and BRG settings and the clock routing.

Best regards,

Wolfgang Denk

Signature · 5 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There's nothing  disgusting  about  it  [the  Companion].  It's  just
another life form, that's all. You get used to those things.
	-- McCoy, "Metamorphosis", stardate 3219.8