A320: Add support for Faraday A320 evaluation board
Subsystems (2)
PATCH 3/3 A320: Add support for Faraday A320 evaluation board
This patch adds support for A320 development board from Faraday. This board uses FA526 processor by default and has 512kB and 32MB NOR flash, 64M RAM. FA526 is an ARMv4 processor and uses the ARM920T source in this patch.
---
Index: Makefile
===================================================================
RCS file: /usr/local/cvsroot/ctd/u-boot-2009.06/Makefile,v retrieving revision 1.1.1.1
Makefile +7 -0
@@ -2940,6 +2940,13 @@ @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave ######################################################################### +## Faraday A320 Systems +######################################################################### + +a320_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t a320 faraday + +######################################################################### ## ARM720T Systems #########################################################################
Index: board/faraday/a320/Makefile
===================================================================
RCS file: board/faraday/a320/Makefile
faraday/a320/Makefile new file +51 -0
51 lines not on this page · raw message
Index: board/faraday/a320/board.c
===================================================================
RCS file: board/faraday/a320/board.c
faraday/a320/board.c new file +120 -0
120 lines not on this page · raw message
Index: board/faraday/a320/config.mk
===================================================================
RCS file: board/faraday/a320/config.mk
faraday/a320/config.mk new file +35 -0
@@ -0,0 +1,35 @@ +# +# (C) Copyright 2009 Faraday Technology +# Po-Yu Chuang <[email protected]> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# Faraday A320 board with FA526/FA626TE/ARM926EJ-S cpus +# +# see http://www.faraday-tech.com/ for more information + +# A320 has 1 bank of 64 MB DRAM (after remapped) +# +# 0000'0000 to 0400'0000 +# +# Linux-Kernel is expected to be at 0000'8000, entry 0000'8000 +# +# we load ourself to 03f8'0000 +# +# download area is 0200'0000 + +TEXT_BASE = 0x03f80000
Index: board/faraday/a320/ftahbc.h
===================================================================
RCS file: board/faraday/a320/ftahbc.h
faraday/a320/ftahbc.h new file +71 -0
71 lines not on this page · raw message
Index: board/faraday/a320/ftpmu.h
===================================================================
RCS file: board/faraday/a320/ftpmu.h
faraday/a320/ftpmu.h new file +190 -0
190 lines not on this page · raw message
Index: board/faraday/a320/ftsdmc.h
===================================================================
RCS file: board/faraday/a320/ftsdmc.h
faraday/a320/ftsdmc.h new file +103 -0
103 lines not on this page · raw message
Index: board/faraday/a320/ftsmc.h
===================================================================
RCS file: board/faraday/a320/ftsmc.h
faraday/a320/ftsmc.h new file +73 -0
73 lines not on this page · raw message
Index: board/faraday/a320/fttmr.h
===================================================================
RCS file: board/faraday/a320/fttmr.h
faraday/a320/fttmr.h new file +73 -0
73 lines not on this page · raw message
Index: board/faraday/a320/lowlevel_init.S
===================================================================
RCS file: board/faraday/a320/lowlevel_init.S
faraday/a320/lowlevel_init.S new file +205 -0
205 lines not on this page · raw message
Index: board/faraday/a320/timer.c
===================================================================
RCS file: board/faraday/a320/timer.c
faraday/a320/timer.c new file +209 -0
209 lines not on this page · raw message
Index: board/faraday/a320/u-boot.lds
===================================================================
RCS file: board/faraday/a320/u-boot.lds
faraday/a320/u-boot.lds new file +57 -0
57 lines not on this page · raw message
Index: include/configs/a320.h
===================================================================
RCS file: include/configs/a320.h
configs/a320.h new file +181 -0
181 lines not on this page · raw message
PATCH 3/3 A320: Add support for Faraday A320 evaluation board
Quoted 6 lines · Po-Yu Chuang
This patch adds support for A320 development board from Faraday. This board uses FA526 processor by default and has 512kB and 32MB NOR flash, 64M RAM. FA526 is an ARMv4 processor and uses the ARM920T source in this patch.
Signed-off-by Po-Yu Chuang <[email protected]>---
please use git
please add a MAKEALL and MAINTAINER entry
Quoted 8 lines
Index:
Makefile
===================================================================
RCS file:/usr/local/cvsroot/ctd/u-boot-2009.06/Makefile,vretrieving revision 1.1.1.1
diff -u -r1.1.1.1Makefile
Makefile line 2947
Quoted 8 lines
Makefile +5
-0@@ -2940,6 +2940,13 @@ @$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave ######################################################################### +## Faraday A320 Systems +######################################################################### + +a320_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t a320 faraday
920T but you write 926ejs in the config.mk?
Quoted 5 lines
Makefile +2
-0+ +######################################################################### ## ARM720T Systems #########################################################################
<snip>
Quoted 50 lines
Index:
board/faraday/a320/board.c
===================================================================
RCS file:board/faraday/a320/board.c
diff -Nboard/faraday/a320/board.cfaraday/a320/board.c new file +43
-0@@ -0,0 +1,120 @@ +/* +* (C) Copyright 2009 Faraday Technology +* Po-Yu Chuang <[email protected]> +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <common.h> +#include <netdev.h> +#include <rtc.h> + +#include "ftsmc.h" + +DECLARE_GLOBAL_DATA_PTR ; + +#define FLASH_BANK0_CONFIG (FTSMC_BANK_ENABLE | \ + FTSMC_BANK_BASE(PHYS_FLASH_1) | \ + FTSMC_BANK_SIZE_1M | \ + FTSMC_BANK_MBW_8) + +#define FLASH_BANK0_TIMING (FTSMC_TPR_RBE | \ + FTSMC_TPR_AST(3) | \ + FTSMC_TPR_CTW(3) | \ + FTSMC_TPR_ATI(0xf) | \ + FTSMC_TPR_AT2(3) | \ + FTSMC_TPR_WTC(3) | \ + FTSMC_TPR_AHT(3) | \ + FTSMC_TPR_TRNA(0xf)) + +#define FLASH_BANK1_CONFIG (FTSMC_BANK_ENABLE | \ + FTSMC_BANK_BASE(PHYS_FLASH_2) | \
faraday/a320/board.c line 53
Quoted 10 lines
faraday/a320/board.c new file +10
-0+ FTSMC_BANK_SIZE_32M | \ + FTSMC_BANK_MBW_32 ) + +#define FLASH_BANK1_TIMING (FTSMC_TPR_AST(3) | \ + FTSMC_TPR_CTW(3) | \ + FTSMC_TPR_ATI(0xf) | \ + FTSMC_TPR_AT2(3) | \ + FTSMC_TPR_WTC(3) | \ + FTSMC_TPR_AHT(3) | \ + FTSMC_TPR_TRNA(0xf))
please move this to config header
faraday/a320/board.c line 55
Quoted 2 lines
faraday/a320/board.c new file +2
-0+ +extern int timer_init (void );
no-need please remove
faraday/a320/board.c line 62
Quoted 7 lines
faraday/a320/board.c new file +7
-0+ +/* +* Miscellaneous platform dependent initialisations +*/ + +static void +ftsmc_setup_bank (int bank,unsigned int config,unsigned int timing)
is this board or soc specific?
faraday/a320/board.c line 72
Quoted 10 lines
faraday/a320/board.c new file +10
-0+{ +volatile struct ftsmc *smc = (struct ftsmc *)CONFIG_SYS_SMC_BASE ; + +if (bank <0 || bank >3 ) { +printf ("bank # %d invalid\n" , bank); +return ; + } + + smc->bank[bank].cr =cpu_to_le32 (config); + smc->bank[bank].tpr =cpu_to_le32 (timing);
please use proper accessor everywhere
Quoted 5 lines
faraday/a320/board.c new file +5
-0+} + +/* initialize Flash */ +static void ftsmc_init (void ) +{
faraday/a320/board.c line 87
Quoted 10 lines
faraday/a320/board.c new file +10
-0+ftsmc_setup_bank (0 ,FLASH_BANK0_CONFIG ,FLASH_BANK0_TIMING ); +ftsmc_setup_bank (1 ,FLASH_BANK1_CONFIG ,FLASH_BANK1_TIMING ); +} + +int board_init (void ) +{ + gd->bd->bi_arch_number =MACH_TYPE_FARADAY ; + +ftsmc_init (); +rtc_reset ();
do you really need this so early the rtc and enable everytime?
faraday/a320/board.c line 88
Quoted 1 line
faraday/a320/board.c new file +1
-0+timer_init ();
no-need pelase remove
Quoted 22 lines
faraday/a320/board.c new file +22
-0+return 0 ; +} + +int dram_init (void ) +{ + gd->bd->bi_dram[0 ].start =PHYS_SDRAM_1 ; + gd->bd->bi_dram[0 ].size =PHYS_SDRAM_1_SIZE ; + +return 0 ; +} + +int board_eth_init (bd_t * bd) +{ +return ftmac100_initialize (bd); +} + +ulong board_flash_get_legacy (ulong base,int banknum,flash_info_t * info) +{ +if (banknum ==0 ) {/* non-CFI boot flash */ + info->portwidth =FLASH_CFI_8BIT ; + info->chipwidth =FLASH_CFI_BY8 ; + info->interface =FLASH_CFI_X8 ;
faraday/a320/board.c line 120
Quoted 10 lines
faraday/a320/board.c new file +10
-0+return 1 ; + }else +return 0 ; +} + +int interrupt_init (void ) +{ +/* nothing happens here - we don't setup any IRQs */ +return (0 ); +}
no-need please remove
Quoted 18 lines
Index:
board/faraday/a320/config.mk
===================================================================
RCS file:board/faraday/a320/config.mk
diff -Nboard/faraday/a320/config.mkfaraday/a320/config.mk new file +11
-0@@ -0,0 +1,35 @@ +# +# (C) Copyright 2009 Faraday Technology +# Po-Yu Chuang <[email protected]> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of
faraday/a320/config.mk line 21
Quoted 10 lines
faraday/a320/config.mk new file +10
-0+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# Faraday A320 board with FA526/FA626TE/ARM926EJ-S cpus
??
Quoted 14 lines
faraday/a320/config.mk new file +14
-0+# +# see http://www.faraday-tech.com/ for more information + +# A320 has 1 bank of 64 MB DRAM (after remapped) +# +# 0000'0000 to 0400'0000 +# +# Linux-Kernel is expected to be at 0000'8000, entry 0000'8000 +# +# we load ourself to 03f8'0000 +# +# download area is 0200'0000 + +TEXT_BASE = 0x03f80000
<snip>
Quoted 5 lines
Index:
board/faraday/a320/ftahbc.h
Index:board/faraday/a320/ftpmu.h
Index:board/faraday/a320/ftsdmc.h
Index:board/faraday/a320/ftsmc.h
Index:board/faraday/a320/fttmr.h
If I undersand correctly all those header are soc specific not board specific as the timer code
so please move the header toinclude/asm-arm/arch-faraday or your soc familiy name
and the code to
cpu/armxxx/faraday/
Quoted 27 lines
Index:
board/faraday/a320/lowlevel_init.S
===================================================================
RCS file:board/faraday/a320/lowlevel_init.S
diff -Nboard/faraday/a320/lowlevel_init.Sfaraday/a320/lowlevel_init.S new file +20
-0@@ -0,0 +1,205 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang <[email protected]> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <config.h>
faraday/a320/lowlevel_init.S line 30
Quoted 10 lines
faraday/a320/lowlevel_init.S new file +10
-0+#include <version.h> +#include "ftahbc.h" +#include "ftsdmc.h" + +/* + * Memory Mapping + */ +#define CONFIG_SYS_ROM_DEFAULT 0x00000000 +#define CONFIG_SYS_SDRAM_DEFAULT 0x10000000 +#define CONFIG_SYS_SDRAM_REMAPPED PHYS_SDRAM_1 /* remap location */
I guess this board specific too
faraday/a320/lowlevel_init.S line 39
Quoted 9 lines
faraday/a320/lowlevel_init.S new file +9
-0+ +/* + * numeric 7 segment display + */ +.macro led, num, rtmp1, rtmp2 + mov \rtmp1, #\num + ldr \rtmp2, =CONFIG_SYS_DEBUG_LED + str \rtmp1, [\rtmp2] +.endm
please use write32
Quoted 29 lines
faraday/a320/lowlevel_init.S new file +29
-0+ +.global reset_cpu +reset_cpu: + b reset_cpu + +.globl lowlevel_init +lowlevel_init: + mov r11, lr + + led 0x0, r0, r1 + + /* if REMAP bit is set -> memory had been initialzed */ + + ldr r0, =CONFIG_SYS_AHBC_BASE + ldr r1, [r0, #FTAHBC_OFFSET_ICR] + tst r1, #FTAHBC_ICR_REMAP @ test REMAP bit + bne 1f + + bl init_sdmc + + led 0x1, r0, r1 + + /* + * copy U-Boot to RAM + */ +copy_code: + ldr r0, =CONFIG_SYS_ROM_DEFAULT /* r0 <- source address */ + ldr r1, =CONFIG_SYS_SDRAM_DEFAULT /* r1 <- target address */ +
faraday/a320/lowlevel_init.S line 78
Quoted 10 lines
faraday/a320/lowlevel_init.S new file +10
-0+ ldr r2, .LC5 + ldr r3, .LC6 + sub r2, r3, r2 /* r2 <- size of armboot */ + add r2, r0, r2 /* r2 <- source end address */ + +copy_loop: + ldmia r0!, {r3-r10} /* copy from source address [r0] */ + stmia r1!, {r3-r10} /* copy to target address [r1] */ + cmp r0, r2 /* until source end addreee [r2] */ + ble copy_loop
why???
it's already done in the start.S
Quoted 12 lines
faraday/a320/lowlevel_init.S new file +12
-0+ + led 0x2, r0, r1 + + bl remap +1: + led 0x3, r0, r1 + + /* everything is fine now */ + mov lr, r11 + mov pc, lr + +.LC5:
faraday/a320/lowlevel_init.S line 100
Quoted 10 lines
faraday/a320/lowlevel_init.S new file +10
-0+ .word _start +.LC6: + .word __bss_start + +/* + * memory initialization + */ +init_sdmc: + mov r9, lr +
please use write32 and co when it's possibleinclude/asm-arm/macro.h
Quoted 90 lines
faraday/a320/lowlevel_init.S new file +90
-0+ /* set SDRAM register */ + ldr r0, =CONFIG_SYS_SDMC_BASE + ldr r1, tp0 + str r1, [r0, #FTSDMC_OFFSET_TP0] + ldr r1, tp1 + str r1, [r0, #FTSDMC_OFFSET_TP1] + + /* set to precharge */ + mov r1, #FTSDMC_CR_IPREC + str r1, [r0, #FTSDMC_OFFSET_CR] + + /* Waiting for SDRAM to set up */ +4: + ldr r1, [r0, #FTSDMC_OFFSET_CR] + cmp r1, #0 + bne 4b + + /* set mode register */ + ldr r1, =FTSDMC_CR_ISMR + str r1, [r0, #FTSDMC_OFFSET_CR] + + /* Waiting for SDRAM to set up */ +5: + ldr r1, [r0, #FTSDMC_OFFSET_CR] + cmp r1, #0 + bne 5b + + /* set to refresh */ + mov r1, #FTSDMC_CR_IREF + str r1, [r0, #FTSDMC_OFFSET_CR] + + /* Waiting for SDRAM to set up */ +6: + ldr r1, [r0, #FTSDMC_OFFSET_CR] + cmp r1, #0 + bne 6b + + ldr r1, b0_bsr + ldr r2, =FTSDMC_BANK_BASE(CONFIG_SYS_SDRAM_DEFAULT) + orr r1, r1, r2 + str r1, [r0, #FTSDMC_OFFSET_BANK0_BSR] @ bank 0 + + ldr r1, =0x0 + str r1, [r0, #FTSDMC_OFFSET_BANK1_BSR] @ bank 1 (clear/disable) + str r1, [r0, #FTSDMC_OFFSET_BANK2_BSR] @ bank 2 (clear/disable) + str r1, [r0, #FTSDMC_OFFSET_BANK3_BSR] @ bank 3 (clear/disable) + str r1, [r0, #FTSDMC_OFFSET_BANK4_BSR] @ bank 4 (clear/disable) + str r1, [r0, #FTSDMC_OFFSET_BANK5_BSR] @ bank 5 (clear/disable) + str r1, [r0, #FTSDMC_OFFSET_BANK6_BSR] @ bank 6 (clear/disable) + str r1, [r0, #FTSDMC_OFFSET_BANK7_BSR] @ bank 7 (clear/disable) + + ldr r1, =FTSDMC_ACR_TOC(0x18) + str r1, [r0, #FTSDMC_OFFSET_ACR] @ arbiter + + mov lr, r9 + mov pc, lr + +/* + * This code will remap the memory ROM and SDRAM + * ROM will be placed on 0x80000000 SDRAM will jump to 0x0 + */ +remap: + mov r9, lr + + ldr r0, =CONFIG_SYS_SDMC_BASE + + /* first adjust sdram */ + ldr r1, b0_bsr + ldr r2, =FTSDMC_BANK_BASE(CONFIG_SYS_SDRAM_REMAPPED) + orr r1, r1, r2 + str r1, [r0, #FTSDMC_OFFSET_BANK0_BSR] @ bank 0 + + /* then remap */ + ldr r3, =CONFIG_SYS_AHBC_BASE + ldr r4, [r3, #FTAHBC_OFFSET_ICR] + orr r4, r4, #FTAHBC_ICR_REMAP @ Set REMAP bit + str r4, [r3, #FTAHBC_OFFSET_ICR] + + mov lr, r9 + mov pc, lr + +/* + * some parameters for the board + */ +tp0: .word FTSDMC_TP0_TRAS(2) | \ + FTSDMC_TP0_TRP(1) | \ + FTSDMC_TP0_TRCD(1) | \ + FTSDMC_TP0_TRF(3) | \ + FTSDMC_TP0_TWR(1) | \ + FTSDMC_TP0_TCL(2)
faraday/a320/lowlevel_init.S line 200
Quoted 10 lines
faraday/a320/lowlevel_init.S new file +10
-0+ +tp1: .word FTSDMC_TP1_INI_PREC(4) | \ + FTSDMC_TP1_INI_REFT(8) | \ + FTSDMC_TP1_REF_INTV(0x180) + +b0_bsr: .word FTSDMC_BANK_ENABLE | \ + FTSDMC_BANK_DDW_X16 | \ + FTSDMC_BANK_DSZ_256M | \ + FTSDMC_BANK_MBW_32 | \ + FTSDMC_BANK_SIZE_64M
those config will need to the config head
Quoted 1 line
Index:
board/faraday/a320/u-boot.lds
no need please remove
Quoted 34 lines
Index:
include/configs/a320.h
===================================================================
RCS file:include/configs/a320.h
diff -Ninclude/configs/a320.hconfigs/a320.h new file +27
-0@@ -0,0 +1,181 @@ +/* +* (C) Copyright 2009 Faraday Technology +* Po-Yu Chuang <[email protected]> +* +* Configuation settings for the Faraday A320 board. +* +* This program is free software; you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation; either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- +* CPU and Board Configuration Options +*/
configs/a320.h line 37
Quoted 10 lines
configs/a320.h new file +10
-0+#define CONFIG_A320 /* in a Faraday A320 SoC/Board */ + +#undef CONFIG_USE_IRQ/* we don't need IRQ/FIQ stuff */ + +#undef CONFIG_SKIP_LOWLEVEL_INIT + +/*----------------------------------------------------------------------- +* Timer +*/ +#define CONFIG_SYS_HZ 32768/* timer ticks per second */
1000 mandatory
configs/a320.h line 38
Quoted 1 line
configs/a320.h new file +1
-0+#define CONFIG_SYS_TIMERBASE 0x98400000
is it board specific??
configs/a320.h line 44
Quoted 6 lines
configs/a320.h new file +6
-0+ +/*----------------------------------------------------------------------- +* RTC +*/ +#define CONFIG_RTC_FTRTC +#define CONFIG_SYS_RTC_BASE 0x98600000
ditto
Quoted 13 lines
configs/a320.h new file +13
-0+ +/*----------------------------------------------------------------------- +* Serial console configuration +*/ + +/* FTUART is a high speed NS 16C550A compatible UART */ +#define CONFIG_BAUDRATE 38400 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_COM1 0x98200000 +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_CLK 18432000
configs/a320.h line 67
Quoted 10 lines
configs/a320.h new file +10
-0+ +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- +* Ethernet +*/ +#define CONFIG_NET_MULTI +#define CONFIG_DRIVER_FTMAC100 +#define CONFIG_SYS_MAC100_BASE 0x90900000
ditto
configs/a320.h line 73
Quoted 6 lines
configs/a320.h new file +6
-0+ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ETHADDR c3:10:da:ce:3f:3e +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_IPADDR 192.168.68.55 +#define CONFIG_SERVERIP 192.168.68.63
please remove the mac and ip config
configs/a320.h line 81
Quoted 8 lines
configs/a320.h new file +8
-0+ +/*----------------------------------------------------------------------- +* Hardware register bases +*/ +#define CONFIG_SYS_AHBC_BASE 0x90100000/* AHB Controller */ +#define CONFIG_SYS_SMC_BASE 0x90200000/* Static Memory Controller */ +#define CONFIG_SYS_DEBUG_LED 0x902ffffc/* Debug LED */ +#define CONFIG_SYS_SDMC_BASE 0x90300000/* SDRAM Controller */
is it board specific??
configs/a320.h line 83
Quoted 2 lines
configs/a320.h new file +2
-0+ +#define CONFIG_SYS_FTPMU_BASE 0x98100000/* Power Management Unit */
is it board specific??
Quoted 61 lines
configs/a320.h new file +61
-0+ +/*----------------------------------------------------------------------- +* Command line configuration. +*/ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_PING + +/*----------------------------------------------------------------------- +* Miscellaneous configurable options +*/ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "A320 # "/* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256/* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/*----------------------------------------------------------------------- +* Stack sizes +* +* The stack sizes are set up in start.S using the settings below +*/ +#define CONFIG_STACKSIZE (128 * 1024)/* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 * 1024)/* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4 * 1024)/* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- +* Size of malloc() pool +*/ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) + +/*----------------------------------------------------------------------- +* size in bytes reserved for initial data +*/ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/*----------------------------------------------------------------------- +* Physical Memory Map +*/ +#define CONFIG_NR_DRAM_BANKS 1/* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x00000000/* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000/* 64 MB */ + +/* +* Load address and memory test area should agree with +* board/faraday/a320/config.mk. Be careful not to overwrite U-boot itself. +*/ +#define CONFIG_SYS_LOAD_ADDR 0x02000000 +
configs/a320.h line 154
Quoted 10 lines
configs/a320.h new file +10
-0+/* memtest works on 63 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00000000 +#define CONFIG_SYS_MEMTEST_END 0x03F00000 + +/*----------------------------------------------------------------------- +* FLASH and environment organization +*/ + +/* no environments */ +#define CONFIG_ENV_IS_NOWHERE
you do not plan to store the env in nor?
configs/a320.h line 158
Quoted 4 lines
configs/a320.h new file +4
-0+ +/* Total Size of Environment Sector */ +#define CONFIG_ENV_SIZE 0x20000 +
Best Regards,
J.
PATCH 3/3 A320: Add support for Faraday A320 evaluation board
Dear Jean-Christophe PLAGNIOL-VILLARD,
Thank you for your detailed review
2009/6/24 Jean-Christophe PLAGNIOL-VILLARD <[email protected]>:
Quoted 1 line
please use git
I cannot access git in the company, but I will try that at home.
Quoted 1 line
please add a MAKEALL and MAINTAINER entry
ok, I will fix them
Quoted 4 lines
Quoted 3 lines
RCS file:
/usr/local/cvsroot/ctd/u-boot-2009.06/Makefile,v+a320_config ?: ? ? ? unconfig
+ ? ? @$(MKCONFIG) $(@:_config=) arm arm920t a320 faraday920T but you write 926ejs in the config.mk?
please see the explanation below
Quoted 20 lines
Quoted 20 lines
diff -N
board/faraday/a320/board.c(quoted diff) +19
-0+#define FLASH_BANK0_CONFIG ? (FTSMC_BANK_ENABLE | ? ? ? ? ? ? ? ? ? ?\ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_BANK_BASE(PHYS_FLASH_1) | ? ? ? ?\ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_BANK_SIZE_1M | ? ? ? ? ? ? ? ? ? \ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_BANK_MBW_8) + +#define FLASH_BANK0_TIMING ? (FTSMC_TPR_RBE | ? ? ? ?\ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_TPR_AST(3) | ? ? \ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_TPR_CTW(3) | ? ? \ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_TPR_ATI(0xf) | ? \ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_TPR_AT2(3) | ? ? \ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_TPR_WTC(3) | ? ? \ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_TPR_AHT(3) | ? ? \ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_TPR_TRNA(0xf)) + +#define FLASH_BANK1_CONFIG ? (FTSMC_BANK_ENABLE | ? ? ? ? ? ? ? ? ? ?\ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_BANK_BASE(PHYS_FLASH_2) | ? ? ? ?\ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_BANK_SIZE_32M | ? ? ? ? ? ? ? ? ?\ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_BANK_MBW_32 ) +
Quoted 8 lines
Quoted 7 lines
+#define
FLASH_BANK1_TIMING? (FTSMC_TPR_AST(3)| ? ? \
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_TPR_CTW(3) | ? ? \
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_TPR_ATI(0xf) | ? \+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_TPR_AT2(3) | ? ? \ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_TPR_WTC(3) | ? ? \ + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_TPR_AHT(3) | ? ? \+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?FTSMC_TPR_TRNA(0xf))
please move this to config header
ok, I will fix them
Quoted 3 lines
Review
Quoted 2 lines
(quoted diff) +2
-0+ +extern int timer_init (void);no-need please remove
ok
Quoted 3 lines
Quoted 2 lines
+ ? ? smc->bank[bank].cr ?=
cpu_to_le32(config);
+ ? ? smc->bank[bank].tpr =cpu_to_le32(timing);please use proper accessor everywhere
Should I usewritel(config, &smc->bank[bank].cr);
or
smc->bank[bank].cr = config;
Quoted 7 lines
faraday/a320/board.c
Quoted 6 lines
faraday/a320/board.c new file +6
-0+int board_init (void ) +{ + ? ? gd->bd->bi_arch_number = MACH_TYPE_FARADAY; + + ? ? ftsmc_init (); + ? ? rtc_reset ();do you really need this so early the rtc and enable everytime?
sorry, I don't understand what do you mean.
Quoted 2 lines
Quoted 1 line
+ ? ?
timer_init();no-need pelase remove
ok
Quoted 6 lines
faraday/a320/board.c line 120
Quoted 5 lines
faraday/a320/board.c new file +5
-0+int interrupt_init (void ) +{ + ? ? /* nothing happens here - we don't setup any IRQs */ + ? ? return (0); +}no-need please remove
It looks like interrupt_init is an soc function, I will put it to the soc code.
Quoted 8 lines
Quoted 2 lines
diff -N
board/faraday/a320/config.mk
+# Faraday A320 board with FA526/FA626TE/ARM926EJ-S cpus??
Quoted 5 lines
Index:
board/faraday/a320/ftahbc.h
Index:board/faraday/a320/ftpmu.h
Index:board/faraday/a320/ftsdmc.h
Index:board/faraday/a320/ftsmc.h
Index:board/faraday/a320/fttmr.h
Quoted 6 lines
If I undersand correctly all those header are soc specific not board specific as the timer code
so please move the header toinclude/asm-arm/arch-faradayor your soc familiy name
and the code to
cpu/armxxx/faraday/
We have an SOC called a320 (so does the evaluation board) which has an armv4 cpu called fa526.
We can overdrive (with daughter board) it with a different cpu such as arm926ej-s.
At first, I created cpu/fa526 and copy the cpu stuff from arm920t. Then I found that it is not a good
idea to duplicate code, so I reused cpu/arm920t.
If I should create an SOC directory, where should I place it? cpu/fa526/a320 ? but this duplicates cpu code cpu/arm920t/a320 ? but it is not arm920t in fact cpu/arm926ejs/a320? but it is not arm926ejs by default
Quoted 8 lines
faraday/a320/lowlevel_init.S
Quoted 7 lines
diff -N
board/faraday/a320/lowlevel_init.Sfaraday/a320/lowlevel_init.S new file +6
-0+/* + * Memory Mapping + */ +#define CONFIG_SYS_ROM_DEFAULT ? ? ? ? ? ? ? 0x00000000 +#define CONFIG_SYS_SDRAM_DEFAULT ? ? 0x10000000 +#define CONFIG_SYS_SDRAM_REMAPPED ? ?PHYS_SDRAM_1 ? ?/* remap location */I guess this board specific too
yes
Quoted 9 lines
Quoted 8 lines
+/*
+ * numeric 7 segment display
+ */
+.macro ? ? ? led, num, rtmp1, rtmp2
+ ? ? mov ? ? \rtmp1, #\num
+ ? ? ldr ? ? \rtmp2, =CONFIG_SYS_DEBUG_LED
+ ? ? str ? ? \rtmp1, [\rtmp2]
+.endmplease use write32
ok, I will fix this
Quoted 11 lines
Quoted 11 lines
+ ? ? /*
+ ? ? ?* copy U-Boot to RAM
+ ? ? ?*/(quoted diff) +8
-0+copy_code: + ? ? ldr ? ? r0, =CONFIG_SYS_ROM_DEFAULT ? ? /* r0 <- source address ? ? */ + ? ? ldr ? ? r1, =CONFIG_SYS_SDRAM_DEFAULT ? /* r1 <- target address ? ? */ + + ? ? ldr ? ? r2, .LC5 + ? ? ldr ? ? r3, .LC6 + ? ? sub ? ? r2, r3, r2 ? ? ? ? ? ? ?/* r2 <- size of armboot ? ? ? ? ? ?*/ + ? ? add ? ? r2, r0, r2 ? ? ? ? ? ? ?/* r2 <- source end address ? ? ? ? */
Quoted 8 lines
Review
Quoted 6 lines
(quoted diff) +6
-0+ +copy_loop: + ? ? ldmia ? r0!, {r3-r10} ? ? ? ? ? /* copy from source address [r0] ? ?*/ + ? ? stmia ? r1!, {r3-r10} ? ? ? ? ? /* copy to ? target address [r1] ? ?*/ + ? ? cmp ? ? r0, r2 ? ? ? ? ? ? ? ? ?/* until source end addreee [r2] ? ?*/ + ? ? ble ? ? copy_loopwhy???
it's already done in thestart.S
After power on, cpu starts from ROM (at 0x0) and this code copies u-boot to SDRAM (at 0x10000000). Then the later "remap" routine modifies the setting of the AHB controller. SDRAM base will become 0x0. Therefore I have to do this copy to make "remap" work.
Other boot loader of our company behaves like this and our kernel and non-OS programs depends on it (SDRAM base 0x0). Therefore, TEXT_BASE is 0x03f80000 rather than 0x13f80000.
Quoted 16 lines
Quoted 16 lines
faraday/a320/lowlevel_init.S new file +16
-0+ + ? ? led ? ? 0x2, r0, r1 + + ? ? bl ? ? ?remap +1: + ? ? led ? ? 0x3, r0, r1 + + ? ? /* everything is fine now */ + ? ? mov ? ? lr, r11 + ? ? mov ? ? pc, lr + +.LC5: + ? ? .word ? _start +.LC6: + ? ? .word ? __bss_start +
Quoted 8 lines
faraday/a320/lowlevel_init.S line 100
Quoted 6 lines
faraday/a320/lowlevel_init.S new file +6
-0+/* + * memory initialization + */ +init_sdmc: + ? ? mov ? ? r9, lr +please use write32 and co when it's possible
include/asm-arm/macro.h
ok, I will fix them
Quoted 43 lines
Quoted 43 lines
+ ? ? /* set SDRAM register */
+ ? ? ldr ? ? r0, =CONFIG_SYS_SDMC_BASE
+ ? ? ldr ? ? r1, tp0
+ ? ? str ? ? r1, [r0, #FTSDMC_OFFSET_TP0]
+ ? ? ldr ? ? r1, tp1
+ ? ? str ? ? r1, [r0, #FTSDMC_OFFSET_TP1](quoted diff) +36
-0+/* + * This code will remap the memory ROM and SDRAM + * ROM will be placed on 0x80000000 SDRAM will jump to 0x0 + */ +remap: + ? ? mov ? ? r9, lr + + ? ? ldr ? ? r0, =CONFIG_SYS_SDMC_BASE + + ? ? /* first adjust sdram */ + ? ? ldr ? ? r1, b0_bsr + ? ? ldr ? ? r2, =FTSDMC_BANK_BASE(CONFIG_SYS_SDRAM_REMAPPED) + ? ? orr ? ? r1, r1, r2 + ? ? str ? ? r1, [r0, #FTSDMC_OFFSET_BANK0_BSR] ? ? ?@ bank 0 + + ? ? /* then remap */ + ? ? ldr ? ? r3, =CONFIG_SYS_AHBC_BASE + ? ? ldr ? ? r4, [r3, #FTAHBC_OFFSET_ICR] + ? ? orr ? ? r4, r4, #FTAHBC_ICR_REMAP ? ? ? ? ? ? ? @ Set REMAP bit + ? ? str ? ? r4, [r3, #FTAHBC_OFFSET_ICR] + + ? ? mov ? ? lr, r9 + ? ? mov ? ? pc, lr + +/* + * some parameters for the board + */ +tp0: .word ? FTSDMC_TP0_TRAS(2) | ? ?\ + ? ? ? ? ? ? FTSDMC_TP0_TRP(1) | ? ? \ + ? ? ? ? ? ? FTSDMC_TP0_TRCD(1) | ? ?\ + ? ? ? ? ? ? FTSDMC_TP0_TRF(3) | ? ? \ + ? ? ? ? ? ? FTSDMC_TP0_TWR(1) | ? ? \ + ? ? ? ? ? ? FTSDMC_TP0_TCL(2) + +tp1: .word ? FTSDMC_TP1_INI_PREC(4) | ? ? ? ?\ + ? ? ? ? ? ? FTSDMC_TP1_INI_REFT(8) | ? ? ? ?\
Quoted 8 lines
Review
Quoted 7 lines
+ ? ? ? ? ? ?
FTSDMC_TP1_REF_INTV(0x180)(quoted diff) +6
-0+ +b0_bsr: ? ? ?.word ? FTSDMC_BANK_ENABLE | ? ?\ + ? ? ? ? ? ? FTSDMC_BANK_DDW_X16 | ? \ + ? ? ? ? ? ? FTSDMC_BANK_DSZ_256M | ?\ + ? ? ? ? ? ? FTSDMC_BANK_MBW_32 | ? ?\ + ? ? ? ? ? ? FTSDMC_BANK_SIZE_64Mthose config will need to the config head
ok, I will fix this
Quoted 40 lines
Quoted 1 line
Index:
board/faraday/a320/u-boot.ldsno need please remove
Quoted 37 lines
Index:
include/configs/a320.h
===================================================================
RCS file:include/configs/a320.h
diff -Ninclude/configs/a320.hconfigs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 renamed from dev/null 1 Jan 1970 00:00:00 -0000 +30
-0@@ -0,0 +1,181 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang <[email protected]> + * + * Configuation settings for the Faraday A320 board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * CPU and Board Configuration Options + */ +#define CONFIG_A320 ? ? ? ? ?/* in a Faraday A320 SoC/Board ? */ + +#undef CONFIG_USE_IRQ ? ? ? ? ? ? ? ?/* we don't need IRQ/FIQ stuff */
Quoted 8 lines
configs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 line 37
Quoted 7 lines
configs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 renamed from dev/null 1 Jan 1970 00:00:00 -0000 +7
-0+ +#undef CONFIG_SKIP_LOWLEVEL_INIT + +/*----------------------------------------------------------------------- + * Timer + */ +#define CONFIG_SYS_HZ ? ? ? ? ? ? ? ?32768 ? /* timer ticks per second */1000 mandatory
ok, I will fix it
Quoted 2 lines
configs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 line 38
Quoted 1 line
configs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 renamed from dev/null 1 Jan 1970 00:00:00 -0000 +1
-0+#define CONFIG_SYS_TIMERBASE 0x98400000is it board specific??
soc specific indeed
Quoted 7 lines
configs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 line 44
Quoted 6 lines
configs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 renamed from dev/null 1 Jan 1970 00:00:00 -0000 +6
-0+ +/*----------------------------------------------------------------------- + * RTC + */ +#define CONFIG_RTC_FTRTC +#define CONFIG_SYS_RTC_BASE ?0x98600000ditto
ok
Quoted 2 lines
configs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 line 45
Quoted 1 line
configs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 renamed from dev/null 1 Jan 1970 00:00:00 -0000 +1
-0+#define CONFIG_SYS_MAC100_BASE ? ? ? 0x90900000ditto
ok
Quoted 7 lines
configs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 line 51
Quoted 6 lines
configs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 renamed from dev/null 1 Jan 1970 00:00:00 -0000 +6
-0+ +#define CONFIG_BOOTDELAY ? ? 3 +#define CONFIG_ETHADDR ? ? ? ? ? ? ? c3:10:da:ce:3f:3e +#define CONFIG_NETMASK ? ? ? ? ? ? ? 255.255.255.0 +#define CONFIG_IPADDR ? ? ? ? ? ? ? ?192.168.68.55 +#define CONFIG_SERVERIP ? ? ? ? ? ? ?192.168.68.63please remove the mac and ip config
ok, I will fix it
Quoted 9 lines
configs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 line 59
Quoted 8 lines
configs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 renamed from dev/null 1 Jan 1970 00:00:00 -0000 +8
-0+ +/*----------------------------------------------------------------------- + * Hardware register bases + */ +#define CONFIG_SYS_AHBC_BASE 0x90100000 ? ? ?/* AHB Controller */ +#define CONFIG_SYS_SMC_BASE ?0x90200000 ? ? ?/* Static Memory Controller */ +#define CONFIG_SYS_DEBUG_LED 0x902ffffc ? ? ?/* Debug LED */ +#define CONFIG_SYS_SDMC_BASE 0x90300000 ? ? ?/* SDRAM Controller */is it board specific??
You are right. soc specific
Quoted 4 lines
configs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 line 61
Quoted 3 lines
configs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 renamed from dev/null 1 Jan 1970 00:00:00 -0000 +2
-0+ +#define CONFIG_SYS_FTPMU_BASE ? ? ? ?0x98100000 ? ? ?/* Power Management Unit */is it board specific??
ok
Quoted 3 lines
configs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 line 63
Quoted 2 lines
configs/a320.h ? ?23 Jun 2009 06:25:54 -0000 ? ? ?1.3 renamed from dev/null 1 Jan 1970 00:00:00 -0000 +2
-0+/* no environments */ +#define CONFIG_ENV_IS_NOWHEREyou do not plan to store the env in nor?
Yes, I do, but I will do this later after the current patches are accepted.
Best regards,
Po-Yu Chuang
PATCH 3/3 A320: Add support for Faraday A320 evaluation board
Hello Po-Yu,
Quoted 3 lines
2009/6/24 Jean-Christophe PLAGNIOL-VILLARD <[email protected]>:
Quoted 1 line
please use git
I cannot access git in the company, but I will try that at home.
Why is that? If it is because of the git port not getting through a company firewall, we do actually offer http:// access to our git repos - just check the "URL" section in gitweb[1].
Cheers
Detlev
[1] http://git.denx.de/?p=u-boot.git;a=summary
Signature · 7 lines
One of the main causes of the fall of the Roman Empire was that, lacking zero,
they had no way to indicate successful termination of their C programs.
-- Robert Firth
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.dePATCH 3/3 A320: Add support for Faraday A320 evaluation board
Dear Detlev Zundel,
2009/6/24 Detlev Zundel <[email protected]>:
Quoted 4 lines
Quoted 1 line
I cannot access git in the company, but I will try that at home.
Why is that? ?If it is because of the git port not getting through a company firewall, we do actually offer http:// access to our git repos - just check the "URL" section in gitweb[1].
I have tried on two machines.
desktop with vmware
# git clone http://git.denx.de/u-boot.git Initialized empty Git repository in /home/ratbert/linux/u-boot/.git/ fatal: http://git.denx.de/u-boot.git/info/refs download error - Empty reply from server
linux server
$ git clone http://git.denx.de/u-boot.git Initialized empty Git repository in /opt/ratbert/linux/u-boot/.git/ fatal: http://git.denx.de/u-boot.git/info/refs download error - couldn't connect to host
p.s. ping git.denx.de OK
best regards,
Po-Yu Chuang
PATCH 3/3 A320: Add support for Faraday A320 evaluation board
Hi Po-Yu Chuang,
Quoted 15 lines
Dear Detlev Zundel,
2009/6/24 Detlev Zundel <[email protected]>:
Quoted 4 lines
Quoted 1 line
I cannot access git in the company, but I will try that at home.
Why is that? ?If it is because of the git port not getting through a company firewall, we do actually offer http:// access to our git repos - just check the "URL" section in gitweb[1].
I have tried on two machines.
desktop with vmware
# git clone http://git.denx.de/u-boot.git Initialized empty Git repository in /home/ratbert/linux/u-boot/.git/ fatal: http://git.denx.de/u-boot.git/info/refs download error - Empty reply from server
Quoted 7 lines
linux server
$ git clone http://git.denx.de/u-boot.git Initialized empty Git repository in /opt/ratbert/linux/u-boot/.git/ fatal: http://git.denx.de/u-boot.git/info/refs download error - couldn't connect to hostp.s. ping git.denx.de OK
Hm. Do you have any kind of proxy in between? This works flawlessly for me:
[dzu at pollux tmp]$ git clone http://git.denx.de/u-boot.git
Initialized empty Git repository in /tmp/u-boot/.git/ got 3e88337b225bf796f6df21d0a7f591530e9d4ce0
walk 3e88337b225bf796f6df21d0a7f591530e9d4ce0
Getting alternates list for http://git.denx.de/u-boot.git
Getting pack list for http://git.denx.de/u-boot.git
Getting index for pack 9d6ff0d1b6334089f18fe2a25e4017a9a874cd77 Getting index for pack 3d2c42c65b4d7647eb78fc59504a61ffb3e36987 Getting index for pack dc08df4b9096a9aea978018a87cefd5719f92b96 Getting index for pack 005a71750c21a5b02b8b539e5305d956d39a3551 Getting index for pack c0db934da1ae1ce325e7c27380db2e790c9931b7 Getting index for pack ec2d949e0a06f5472a1e23446f9b46bb1852aa3f Getting index for pack 5a81f6c5331dfb5a851d8e1205c1baa269033eba Getting index for pack a7505bd52e3782f3dfbb10ac4f5b6c8b577c7739 Getting pack 9d6ff0d1b6334089f18fe2a25e4017a9a874cd77
which contains a6e0e74f933745c45d2b5ee83a0898d973acaf71
got d70da93b038dbee50cb3e84cc0db25aab424a772
got 6b1f78ae6ad037382ad430b07064105c88f7ac02
got 95bd78f93cfc903186e88fc58deac036c401cfbc
got 580611cb0932143fc2d7a735cfa9ce1ef34d6002
got 4f90a896f2c64cc05c3a1bc451a0aee6ebbadd61
got afac8b07172d7e4a65f86ce1ec4c783a6165ba1f
....
If you have a proxy, try this beforehand:
export http_proxy=http://<username>:<password>@<proxy_ip>:<proxy_port>
Cheers
Detlev
Signature · 6 lines
To you I'm an atheist; to God, I'm the Loyal Opposition.
-- Woody Allen
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-40 Fax: (+49)-8142-66989-80 Email: dzu at denx.dePATCH 3/3 A320: Add support for Faraday A320 evaluation board
Dear Detlev Zundel,
2009/6/25 Detlev Zundel <[email protected]>:
Quoted 3 lines
If you have a proxy, try this beforehand:
export http_proxy=http://<username>:<password>@<proxy_ip>:<proxy_port>
It works! That's terrific!
Thank you. :-D
regards,
Po-Yu Chuang