Skip to contentSkip to conversation

finding Tekram SCSI dc395U linux patch driver:

DISCUSSION Thomas Lau 5 participants 7 messages Feb 15, 2001 – Feb 20, 2001

lore
Share & tools
lore

Thomas Lau

author
#0 lore raw

hey, I found this driver on mandrake kernel sources, it's ac3, but I need ac14 code, also, why still not port this driver into kernel? the patch file already released 1 years ago

#1 lore raw

Hi,

Quoted 3 lines · On 15-Feb-01 Thomas Lau wrote:

hey, I found this driver on mandrake kernel sources, it's ac3, but I need ac14 code, also, why still not port this driver into kernel? the patch file already released 1 years ago

Have you checked http://www.garloff.de/kurt/linux/dc395/index.html
there ist a driver Version 1.32 (2000-12-02).

Regards

Juergen Schoew

#2 lore raw
Quoted 8 lines · Juergen Schoew

Hi,

Quoted 3 lines · On 15-Feb-01 Thomas Lau wrote:

hey, I found this driver on mandrake kernel sources, it's ac3, but I need ac14 code, also, why still not port this driver into kernel? the patch file already released 1 years ago

Have you checked http://www.garloff.de/kurt/linux/dc395/index.html
there ist a driver Version 1.32 (2000-12-02).

it's the version included with the mandrake kernel.

Signature · 2 lines
MandrakeSoft Inc                     http://www.chmouel.org
                      --Chmouel
author
#3 lore raw
In reply to Juergen Schoew
Quoted 13 lines · Chmouel Boudjnah
Quoted 8 lines · Juergen Schoew

Hi,

Quoted 3 lines · On 15-Feb-01 Thomas Lau wrote:

hey, I found this driver on mandrake kernel sources, it's ac3, but I need ac14 code, also, why still not port this driver into kernel? the patch file already released 1 years ago

Have you checked http://www.garloff.de/kurt/linux/dc395/index.html
there ist a driver Version 1.32 (2000-12-02).

it's the version included with the mandrake kernel.

Quoted 8 lines

--
MandrakeSoft Inc http://www.chmouel.org
--Chmouel
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Well, I think it should add to normal kernel and do not need to patch, Thanks

also, why this driver still stick in ac3? and where can I find the new version of this patch? I think mandrake was improved that driver, Thanks

#4 lore raw
In reply to Juergen Schoew
Quoted 7 lines · Thomas Lau
Quoted 6 lines · Chmouel Boudjnah
Quoted 5 lines · Juergen Schoew
Quoted 3 lines · On 15-Feb-01 Thomas Lau wrote:

hey, I found this driver on mandrake kernel sources, it's ac3, but I need ac14 code, also, why still not port this driver into kernel? the patch file already released 1 years ago

Quoted 6 lines
Quoted 4 lines
Quoted 2 lines

Have you checked http://www.garloff.de/kurt/linux/dc395/index.html
there ist a driver Version 1.32 (2000-12-02).

it's the version included with the mandrake kernel.

Well, I think it should add to normal kernel and do not need to patch, Thanks

No, it shouldn't.
Drivers normally get added to the mainstream kernel if the driver is stable enough and somebody acting as maintainer requests to have it included. And, then of course, Linus / Alan / ... need to accept it.

I'm maintaining this driver, but in spite of lots of requests to add it to the mainstream kernels, I refused to do so. The reason is that some people (ca. 5%) using this driver are having serious problems, which I have not been able to track down so far. In the worst case, you can end up with data corruption. (I could reproduce and fix some of the problems, but not the data corruption one.) As that's not funny, I do not want the driver to be in the mainstream kernel.

Quoted 1 line

also, why this driver still stick in ac3?

?

Quoted 1 line

and where can I find the new version of this patch?

My version is on
http://www.garloff.de/kurt/linux/dc395/

Quoted 1 line

I think mandrake was improved that driver, Thanks

I would be both amazed and pissed off if this would be the case. Amazed because somebody was investing time to work on the driver and potentially even fix problems.
Pissed off, because I think it's very bad to fix problems and not submit the patches back to the official maintainers.

BTW, if somebody can provide a reasonable description of the chip (TRM-S1040), the chances that I'd find the bug would increase a lot ...

Regards,

Signature · 3 lines
Kurt Garloff  <[email protected]>                          Eindhoven, NL
GPG key: See mail header, key servers         Linux kernel development
SuSE GmbH, Nuernberg, FRG                               SCSI, Security
author
#5 lore raw
In reply to Juergen Schoew
Quoted 48 lines · Kurt Garloff
Quoted 7 lines · Thomas Lau
Quoted 6 lines · Chmouel Boudjnah
Quoted 5 lines · Juergen Schoew
Quoted 3 lines · On 15-Feb-01 Thomas Lau wrote:

hey, I found this driver on mandrake kernel sources, it's ac3, but I need ac14 code, also, why still not port this driver into kernel? the patch file already released 1 years ago

Quoted 6 lines
Quoted 4 lines
Quoted 2 lines

Have you checked http://www.garloff.de/kurt/linux/dc395/index.html
there ist a driver Version 1.32 (2000-12-02).

it's the version included with the mandrake kernel.

Well, I think it should add to normal kernel and do not need to patch, Thanks

No, it shouldn't.
Drivers normally get added to the mainstream kernel if the driver is stable enough and somebody acting as maintainer requests to have it included. And, then of course, Linus / Alan / ... need to accept it.

I'm maintaining this driver, but in spite of lots of requests to add it to the mainstream kernels, I refused to do so. The reason is that some people (ca. 5%) using this driver are having serious problems, which I have not been able to track down so far. In the worst case, you can end up with data corruption. (I could reproduce and fix some of the problems, but not the data corruption one.) As that's not funny, I do not want the driver to be in the mainstream kernel.

Quoted 1 line

also, why this driver still stick in ac3?

?

Quoted 1 line

and where can I find the new version of this patch?

My version is on
http://www.garloff.de/kurt/linux/dc395/

Quoted 1 line

I think mandrake was improved that driver, Thanks

I would be both amazed and pissed off if this would be the case. Amazed because somebody was investing time to work on the driver and potentially even fix problems.
Pissed off, because I think it's very bad to fix problems and not submit the patches back to the official maintainers.

BTW, if somebody can provide a reasonable description of the chip (TRM-S1040), the chances that I'd find the bug would increase a lot ...

Quoted 8 lines

Regards,
--
Kurt Garloff <[email protected]> Eindhoven, NL
GPG key: See mail header, key servers Linux kernel development
SuSE GmbH, Nuernberg, FRG SCSI, Security

------------------------------------------------------------------------
Part 1.2Type: application/pgp-signature

well, I saw the driver not updated for a few months ago, can you release a new unstable driver to people?
also, Mandrake and SuSE have a lot of expert that you can find them to help you, they have a lot of resource if you request :)
and I hope you can have a path in kernel.org, so we can get the last release of DC395 driver, Thanks a lot

#6 lore raw
In reply to Thomas Lau

I asked Kurt why it was not submitted to the mainstream kernel. He said that some people are still experiencing problems with the card/driver and he doesn't feel it's stable enough to go in. I'm personally using it with no issues, but I'm only driving a CD-RW - not exactly stressing things.

It sounds like the people having issues need to debug the problems, or maybe it could go in under CONFIG_EXPERIMENTAL ?

Tim

Quoted 17 lines · Juergen Schoew

Hi,

Quoted 3 lines · On 15-Feb-01 Thomas Lau wrote:

hey, I found this driver on mandrake kernel sources, it's ac3, but I need ac14 code, also, why still not port this driver into kernel? the patch file already released 1 years ago

Have you checked http://www.garloff.de/kurt/linux/dc395/index.html
there ist a driver Version 1.32 (2000-12-02).

Regards

Juergen Schoew
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Signature · 4 lines
Tim Wright - [email protected] or [email protected] or [email protected]
IBM Linux Technology Center, Beaverton, Oregon
Interested in Linux scalability ? Look at http://lse.sourceforge.net/
"Nobody ever said I was charming, they said "Rimmer, you're a git!"" RD VI